DVD Player/ Recorder DVDR3400. User Manual 6 Manuel D utilisation 78 Manual de Instrucciones 152

Transcription

1 DVD Player/ Recorder DVDR3400 User Manual 6 Manuel D utilisation 78 Manual de Instrucciones 152

2 Return your Product Registration Card or register online at today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at to ensure: *Proof of Purchase Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service. *Product Safety Notification By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. *Additional Benefits Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers. Know these safetysymbols Congratulations on your purchase, and welcome to the family! Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You ve selected one of the best-built, bestbacked products available today.we ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS family, you re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.what s more, your purchase guarantees you ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. Most importantly, you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome - and thanks for investing in a PHILIPS product. P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once, or register online at: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. For Customer Use Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. Serial No. Visit our World Wide Web Site at 2

3 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. AC Polarized Plug A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11.Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.when a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. 16. Apparatus shall not be exposed to dripping or splashing. 17. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Class II equipment symbol This symbol indicates that the unit has a double insulation system 18. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance : EL 6475-E005: 04/01 3

4 CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. LASER Type Semiconductor laser InGaAlP (DVD) AIGaAs (CD) Wave length 658 nm (DVD) 790 nm (CD) Output Power Beam divergence 30 mw (DVD+RW write) 1.0 mw (DVD read) 1.0 mw (CD read) 84 degrees (DVD) 61 degrees (CD) For Customer Use: Read carefully the information located at the bottom or rear of your DVD Recorder and enter below the Serial No. Retain this information for future reference. Model No. DVD RECORDER DVDR3400 Serial No. 4

5 Index This product incorporates copyright protection technology that is protected by US patents. Use of this copyright protection technology must be authorised by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering or disassembly is prohibited. U.S. Patent Number 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516, Français Français Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Español Español VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. US patent Nr.: 6,466,734; 6,430,359; 6,091,882; 6,049,652; 5,335,079; 5,307,173; 4,908,713; 4,751,578, 4,706,121. DivX, DivX Certified, and associated logos are trademarks of DivX Networks, Inc and are used under license. HDMI, and HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. 5

6 Table of Contents General Care and Safety Information... 8 Setup precautions...8 Cleaning discs...8 About recycling...8 Product Information... 9 Introduction...9 Accessories supplied...9 Region codes...9 Copyright notice...9 Special features...10 Product Overview Main Unit Remote Control Using the remote control...14 Connections Step 1: Basic Recorder Connections Connecting the antenna cables...15 Connecting the video cable...16 Connecting the audio cables...18 Step 2 : Optional Connections TV has only an antenna input jack...19 Connecting to a Cable Box or Satellite Receiver Connecting to a VCR or other similar device...21 Connecting to a VCR and Cable Box/Satellite Receiver Connecting a camcorder to the front jacks Connecting a USB fl ash drive or USB memory card reader...24 Step 3: Installation and Setup...25 Finding the correct viewing channel Setting the OSD language Setting your TV channel programs Setting the date & time...27 Recording Recording...28 Discs for recording Recording settings...29 RECORD settings Recording from various sources...31 Archiving from a USB fl ash drive or USB memory card reader...33 Instant time-off recording Watching another TV program during recording Timer Recording...35 About timer recording Timer recording (VCR Plus+ System) Timer recording (manually) Changing/ Deleting a timer recording

7 Table of Contents Playback Playback Playable discs...39 Starting disc playback Additional Playback Features...44 Changing to another chapter/track Pausing playback Searching forwards/backwards Zooming in Using the TOOLS options Edit Recordings Editing/ Finalizing Recording...48 About disc editing Accessing disc editing menu Playing your recordings on other DVD players (DVD±R only) About title editing...51 Accessing title editing menu...51 About video editing...53 Accessing video editing menu...53 Other Information DVD Setup Menu Options...56 Accessing the Setup Menu GENERAL settings...57 RECORD settings...57 PLAYBACK settings DVD settings CHANNEL SETUP settings...62 CLOCK settings Software Upgrade...65 Installing the latest software Troubleshooting...66 Frequently Asked Questions...70 Specifications...72 Display panel symbols/ messages...73 Glossary

8 Care and Safety Information CAUTION! High voltage! Do not open the device. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Setup precautions Cleaning discs Some problems occur (frozen picture, sound disruptions, picture distortions) because the disc inside the unit is dirty. To avoid these problems, discs should be cleaned on a regular basis. To clean a disc, use a micro fi bre cleaning cloth and wipe the disc from the center to the edge in a straight line. Finding a suitable location Place the set on a fl at, hard and stable surface. Do not place the set on a carpet. Do not position the set on top of other equipment that might heat it up (e.g., receiver or amplifi er.) Do not put anything above or under the set (e.g., CDs, magazines.) Install this unit near the AC outlet and where the AC power plug can be reached easily. Space for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up. Allow at least 10 cm (4 ) clearance from the rear and the top of the set and 5cm (2 ) from the left and right to prevent overheating. Avoid high temperatures, moisture, water and dust Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (e.g., liquid fi lled objects, lighted candles.) CAUTION! Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static sprays intended for discs. Since the optical unit (laser) of the recorder operates at a higher power than regular DVD or CD players, cleaning CDs intended for DVD or CD players may damage the optical unit (laser.) Therefore, refrain from using a cleaning CD. About recycling These operating instructions have been printed on non-polluting paper. This electronic equipment contains a large number of materials that can be recycled. If you are disposing of an old machine, please take it to a recycling center. Please observe the local regulations regarding disposal of packaging materials, exhausted batteries, and old equipment. 8

9 Product Information Introduction Your Philips recorder allows you to record TV programs or duplicate camcorder recordings to a DVD±RW or DVD±R and play pre-recorded DVDs. The recordings you make with this recorder will playback on DVD players and DVD-ROM drives. DVD±R discs have to be fi nalized before they can be played back on other DVD players. Before you start using this recorder, complete the basic connections and set-up in three easy steps. Accessories supplied Remote control and batteries Audio/video cables RF coaxial cable Quick Start Guide Region codes DVD fi lms are usually not released at the same time in all regions of the world, thus all DVD players are keyed to a specifi c region code. Step 1: Basic recorder connections Step 2: Optional connections for other devices Step 3: Basic installation and set-up This device will only play Region 1 DVDs or DVDs manufactured to be played in all regions ( ALL.) DVDs from other regions cannot be played on this recorder. ALL 1 Please take time to read this user manual before using your recorder. It contains important information and notes regarding operations of the recorder. Helpful Hints: If you have questions or if problems occur during operation, see the chapter Troubleshooting. If you need further assistance, please call the customer support service for your country. The corresponding telephone numbers and addresses are given in the guarantee booklet. Refer to the type plate on the rear or bottom of the product for identifi cation and supply ratings. Copyright notice The making of unauthorised copies of copy-protected material, including computer programs, fi les, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. 9

10 Product Information (continued) Special features A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio This is a simple programming system for recorders. To use it, enter the programming number associated with your television program. You can fi nd this number in your favourite listings magazine. The DivX code is a video codec developed by DivXNetworks Inc., that compresses digital video to small sizes while retaining relatively high visual quality. i.link is also known as FireWire and IEEE1394. This connection is used for the transfer of high bandwidth digital signals as used by digital video (DV) camcorders. It carries all audio and video signals via a single cable. HDMI (High-Defi nition Multimedia Interface) is a high-speed digital interface that can transmit uncompressed high defi nition video and digital multichannel audio. It delivers perfect picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. Philips DVD recorders support dual media recording the ability to create recordings on + and - discs (DVD+R/+RW, DVD+R DL, DVD-R/-RW.) Copy or Play from USB to DVD This function allows you to copy your content in your USB fl ash drive/usb memory card reader to a recordable DVD disc. 10

11 Main Unit a b c d e f g h i j k a STANDBY-ON Turns on the recorder or switch to standby mode. b Disc tray c OPEN/CLOSE ç Opens/closes the disc tray. d System display panel Show information about the current status of the recorder. e.(prev) / > (NEXT) Go to the previous/next chapter or track. Press and hold to make a forward/ reverse search. É(PLAY) Plays a disc. (STOP) Stops playback/recording. f (RECORD) Starts recording the current TV channel or the current video input source. Press repeatedly to set up a One Touch Recording at 30, 60 or 90 minutes interval. Jacks behind the flap Flip down the door as indicated by the OPEN label at the right hand corner. g VIDEO Video input for camcorders or video recorders. Press SOURCE on the remote control to select CAM1 in order to view the input source. h L/R AUDIO Audio input for camcorders or video recorders. i S-VIDEO S-video input for SVHS/Hi8 camcorders or SVHS/Hi8 video recorders. Press SOURCE on the remote control to select CAM2 in order to view the input source j DV IN Input for digital camcorders or other suitable devices using this connector. Press SOURCE on the remote control to select DV in order to view the input source. k USB Input for USB fl ash drive/ USB memory card reader. Press USB to view the contents of the USB fl ash drive/ USB memory card reader. 11

12 Remote Control SOURCE REPEAT DISC MENU REC MODE USB SELECT TOOLS CLEAR PLAY/PAUSE TIMER EDIT OPEN/CLOSE ç ZOOM a b c d e f g h i j k l m n o a 2 Turns on the recorder or switch to standby mode. b TOOLS Enters/exits the tools or disc/title editing menu. c OPEN/CLOSEç Opens/closes the disc tray. d CLEAR Clears a track/fi le in the selection playlist/ copylist. Clears a timer entry. e ZOOM Enlarges a picture on the TV screen. f SETUP Enters/exits the setup menu. g : Cursor buttons for moving to the left or right. : Cursor buttons for moving up/down or changing the recorder s TV tuner channel. h DISPLAY Displays/removes the status bar. i REW à/ FFW á Fast reverse or fast forward search. j PREVí/ NEXTë Skips to previous or next chapter/track. k STOP Stops playback/recording. l CH +/- While in tuner, selects the next or previous TV channel. m Numeric keypad Selects a chapter/track number to play. Selects the recorder s preset TV tuner channel. n AUDIO Selects an audio language (DVD, VCD) or an audio channel. o VCR Plus+ Enters/exits the VCR Plus+ menu. 12

13 Remote Control (continued) p USB Accesses the contents of the connected USB fl ash drive/ USB memory card reader. q SOURCE Selects the recorder s input source (DV, EXT1, EXT2, CAM1, CAM2 or Tuner.) r SELECT Selects a track/chapter/fi le in the program menu. s REPEAT Repeat playback of title, chapter, track or disc in DVD mode. t DISC MENU Press to access the DVD disc menu or Index Picture screen of a DVD±R/±RW. Press to access the VCD disc menu when PBC is turned on. u OK Stores/confi rms an entry. v BACK Returns to the previous menu of a video CD (VCD.) w PLAY/PAUSE u Plays a disc. Pauses the playback or recording. x REC Starts recording the current TV channel or the current video input source. Press repeatedly to set up a One Touch Recording at 30, 60 or 90 minutes interval. y TV VOL +/ - Adjusts the volume of the TV set (Philips TV only.) z TV MUTE H Mutes the volume of the TV set (Philips TV only.) wj SUBTITLE Selects a DVD subtitle language. wk REC MODE Toggles between recording modes : HQ, SP, SPP, LP, EP, or SLP. p q r s t u v w x y z SOURCE REPEAT DISC MENU REC MODE USB SELECT TOOLS CLEAR PLAY/PAUSE TIMER EDIT OPEN/CLOSE ç ZOOM This determines the quality of the recording and the amount/length of time you can record on a DVD±R/±RW. wl TIMER Enters/exits the timer recording menu. e; EDIT Enters/exits the video editing menu. 13

14 SOURCE USB TV/DVD ç TOOLS SELECT CLEAR REPEAT DISC MENU PLAY REC MODE TIMER EDIT SHOWVIEW Remote Control (continued) Using the remote control C A CAUTION! Remove batteries if they are exhausted or if the remote control is not to be used for a long time. Do not mix batteries (old and new or carbon and alkaline, etc..) Batteries contain chemical substances, so they should be disposed of properly. B A Open the battery compartment. B Insert two batteries of type R03 or AAA, following the indications (+-) inside the compartment. C Close the cover. D Aim the remote control directly at the remote sensor (IR) on the front panel. E Select the source you want to control by pressing the SOURCE button on the remote control. F Select the desired function (for example à, á.) 14

15 AU D IO O U T S-V ID E O IN VID EO IN Step 1: Basic Recorder Connections CABLE SATELLITE ANTENNA A VIDEO (CVBS) EXT 1 INPUT VIDEO (CVBS) PR COMPONENT VIDEO Y L L L L TV-OUT ANTENNA-IN EXT 3 R R R R EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO B TV Connecting the antenna cables These connections enable you to watch and record TV programs using this recorder. If the antenna signal is connected via a VCR, Cable Box or Satellite Receiver, ensure that these devices are turned on in order to watch or record the cable programs. If your TV is equipped with an Antenna In (RF IN) jack only, see Step 2: Optional connections TV has only an antenna input jack for the complete connection to your TV. If you want to connect to a VCR and/or Cable Box/Satellite Receiver, see Step 2: Optional connections for the complete connection to your TV. A Connect the existing Antenna/Cable TV signal (or from the Cable Box/Satellite Receiver {RF OUT or TO TV}) to the ANTENNA-IN jack on the recorder. B Use the supplied RF coaxial cable to connect the TV-OUT jack on the recorder to the antenna input jack on your TV (VHF/UHF RF IN.) Helpful Hint: Depending on how you have currently connected your TV channel (directly from an off-air antenna or Cable box or VCR), you will have to disconnect some of the cables before you make the above connection. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 15

16 AU D IO O U T S-V ID E O IN VID EO IN Step 1: Basic Recorder Connections (continued) TV-OUT ANTENNA-IN VIDEO (CVBS) EXT 1 L R INPUT L R EXT 3 VIDEO (CVBS) PR COMPONENT VIDEO Y L R L R OUTPUT HDMI EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO Option 1 Option 2 OR OR Option 3 TV Connecting the video cable This connection enables you to view the disc playback from this recorder. You need to choose only one of the options below to make your video connection. Option 1: Using a Video (CVBS) cable Use the supplied audio/video cables (yellow plug) to connect the VIDEO (CVBS)-OUTPUT jack on the recorder to the video input jack (or labeled as A/V In, Video In or Composite) on the TV. Option 2: Using an S-Video cable Use an S-video cable (not supplied) to connect the S-VIDEO (Y/C) - OUTPUT jack on the recorder to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV. Option 3: Using a Component Video cable A Use the component video cables (red/ blue/green - not supplied) to connect the Y PB PR -OUTPUT jacks on the recorder to the corresponding component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV. B If your TV accepts Progressive Scan signal, see the chapter DVD Setup Menu Options PLAYBACK settings for detailed set up. IMPORTANT! The progressive scan video quality is only available through a Y PB PR connection and a progressive TV is required. It is strongly advised to complete the recorder installation first, before enabling the progressive scan feature. For options 1 3, audio connection is required in order to hear the sound, see next section Connecting the audio cables TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 16

17 Step 1: Basic Recorder Connections (continued) Option 4 VIDEO (CVBS) PR COMPONENT VIDEO Y OUTPUT L L EXT 3 R R HDMI ~MAINS PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO Option 4: Using a HDMI cable HDMI (High Defi nition Multimedia Interface) is a digital interface that allows pure digital video transmission without the loss of image quality. Note: Proper working is guaranteed with HDMI compliant products. When the HDMI cable is unplugged, the { HDMI Video Resolution } setting will automatically switch to default value {480i}. B Once you have completed the necessary connections, installation and set-up, see chapter DVD Setup Menu Options PLAYBACK Settings. Helpful Hints: Digital devices from different manufacturers have the possibility of differing output standards which may cause diffi culties for the television to properly display. The HDMI connector is only compatible with HDMI compliant devices and DVI-TV. A Use an HDMI cable (not supplied) to connect the HDMI OUTPUT socket on this recorder to the HDMI IN on a HDMI compatible device (e.g. HDMI TV, HDCP compliant DVI TV.) TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 17

18 Step 1: Basic Recorder Connections (continued) VIDEO (CVBS) EXT 1 L INPUT L VIDEO (CVBS) PR COMPONENT VIDEO Y L L OUTPUT EXT 3 R R R R HDMI EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO Option 2 DIGITAL IN Option 1 STEREO / TV AV amplifi er/ receiver Connecting the audio cables This connection enables you to listen to the playback from this recorder. However, this connection is not required if this recorder is connected to the TV using a HDMI cable. Option 1: Using an audio cable You can connect the recorder to a two channel stereo system (mini system, TV) or receiver in order to enjoy the stereo sound system. Use an audio cable (red/white ends) to connect the AUDIO L/R OUTPUT jacks to the audio input jacks of the connected device. Option 2: Using a coaxial cable You can connect the recorder to an AV amplifi er/receiver with a digital multichannel sound decoder in order to enjoy multichannel surround sound. Use a coaxial cable (not supplied.) Connect the COAXIAL (DIGITAL AUDIO) jack on the recorder to the digital input jack on the amplifi er/ receiver. Before you start operating, set the digital audio output settings accordingly (see the section PLAYBACK settings Digital Audio Output.) If the setting does not match your stereo s capabilities, the stereo may produce a strong, distorted sound or no sound at all. Helpful Hint: Do not connect your TV s audio output jacks to the AUDIO-L/-R INPUT jacks on this recorder, this may cause unwanted noise. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 18

19 Step 2 : Optional Connections CABLE SATELLITE ANTENNA A VIDEO (CVBS) EXT 1 INPUT VIDEO (CVBS) PR COMPONENT VIDEO Y L L L L TV-OUT ANTENNA-IN EXT 3 R R R R EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO B D E Back of an RF Modulator (Example only) ANT IN TO TV VIDEO IN C CH3 CH4 R L AUDIO IN TV TV has only an antenna input jack Use this connection if your TV has only a single Antenna In jack (or labeled as 75 ohm or RF IN) and does not have any audio/video jacks. For this connection, you need a RF modulator in order to view the disc playback. A You may have an Antenna/Cable TV signal (or from the Cable Box/Satellite Receiver/VCR) connected to your TV s antenna input jack (VHF/UHF RF IN.) Remove it from the TV and connect it to the ANTENNA-IN jack on the recorder. B Use the supplied RF coaxial cable to connect the TV-OUT jack on the recorder to the antenna input jack on the RF modulator. C Use an RF coaxial cable (not supplied) to connect the TO TV jack on the RF modulator to the antenna input jack on your TV. D Use the supplied AV cables (yellow ends) to connect the VIDEO (CVBS) - OUTPUT jack on the recorder to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the RF modulator. E Use the supplied AV cables (red/white ends) to connect the AUDIO L/R - OUTPUT jacks on the recorder to the audio input jack (or labeled as AUDIO IN or LINE IN) on the RF modulator. Helpful Hints: If you have connected the TO TV jack on your RF modulator to your TV, set your TV to channel 3 or 4. See your electronics retailer for details on RF modulator availability and operations. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 19

20 AU D IO O U T S-V ID E O IN VID EO IN Step 2: Optional Connections (continued) IN RF OUT VIDEO AUDIO R L S-VIDEO Rear of a Cable Box or Satellite Receiver (Example only) CABLE SATELLITE A B ANTENNA VIDEO (CVBS) EXT 1 L INPUT L VIDEO (CVBS) PR COMPONENT VIDEO Y L L TV-OUT ANTENNA-IN EXT 3 R R R R EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB COMPONENT VIDEO Y S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO C TV Connecting to a Cable Box or Satellite Receiver Option 1 If your Cable Box/Satellite Receiver only has an antenna output jack (RF OUT or TO TV), See Step 1: Basic Recorder Connections Connecting the antenna cables for the complete connections to your TV. Option 2 If your Cable Box/Satellite Receiver has video/audio output jacks, A Keep the existing antenna connection from the Antenna/Cable TV signal to the Cable Box/Satellite Receiver. B Use the audio/video cables to connect the VIDEO (CVBS) /AUDIO INPUT jacks on the recorder to the matching VIDEO/AUDIO output jacks on the Cable Box/Satellite Receiver. C Use the audio/video cables to connect the VIDEO (CVBS) /AUDIO OUTPUT jacks on the recorder to the matching VIDEO/AUDIO input jacks on the TV. TIPS: Refer to the respective connected device s user manual for other possible connections. 20

21 AU D IO O U T S-V ID E O IN VID EO IN Step 2: Optional Connections (continued) CABLE VHF/UHF RF IN VIDEO OUT OUT IN VIDEO IN Rear of a VCR (Example only) AUDIO L AUDIO L VHF/UHF RF OUT AUDIO R AUDIO R SATELLITE A C ANTENNA VIDEO (CVBS) EXT 1 INPUT VIDEO (CVBS) PR COMPONENT VIDEO Y OUTPUT L L L L TV-OUT ANTENNA-IN EXT 3 R R R R HDMI EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB Y COMPONENT VIDEO S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO B D TV Connecting to a VCR or other similar device This connection enables you to record from video tape to a DVD±R/±RW and allows the VCR to be used for playback if the recorder is turned off. Before you start... Your new recorder can replace the VCR for all your recording needs. Just unplug all the connections from your VCR. A Connect the Antenna/Cable TV signal to the ANTENNA-IN jack on the recorder. B Use a RF coaxial cable to connect the TV-OUT jack on the recorder to the antenna input jack on your TV (VHF/ UHF RF IN.) C Use the audio/video cables to connect the VIDEO (CVBS)/ AUDIO INPUT (red/whote/yellow) jacks on the recorder to the matching VIDEO/AUDIO output jacks on the VCR. D Use the audio/video cables to connect the VIDEO (CVBS)/ AUDIO OUTPUT (red/whote/yellow) jacks on the recorder to the matching VIDEO/AUDIO input jacks on the TV. Helpful Hints: Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded. Connect the recorder directly to the TV. If there is a VCR or an additional device in between, the picture quality may be poor because of the copy protection system built into the recorder. TIPS: Refer to the respective connected device s user manual for other possible connections. 21

22 AU D IO O U T S-V ID E O IN VID EO IN Step 2: Optional Connections (continued) A CABLE IN RF OUT VIDEO AUDIO R L S-VIDEO Rear of a Cable Box or Satellite Receiver (Example only) SATELLITE B D ANTENNA VIDEO (CVBS) EXT 1 L INPUT L VIDEO (CVBS) PR COMPONENT VIDEO Y L L TV-OUT ANTENNA-IN EXT 3 R R R R EXT 2 S-VIDEO (Y/C) AUDIO AUDIO PR PB Y COMPONENT VIDEO S-VIDEO (Y/C) COAXIAL (DIGITAL AUDIO) PB AUDIO Front Panel of recorder F C E TV VHF/UHF RF IN VIDEO OUT OUT IN VIDEO S-VIDEO IN Rear of a VCR (Example only) AUDIO L AUDIO L VHF/UHF RF OUT AUDIO R AUDIO R Connecting to a VCR and Cable Box/Satellite Receiver A Connect the Antenna/Cable TV signal to the antenna input (RF IN) jack on the Cable Box/ Satellite Receiver. B Use the supplied RF coaxial cable to connect the ANTENNA-IN jack on the recorder to the RF OUT jack on the Cable Box/ Satellite Receiver. C Use a RF coaxial cable (not supplied) to connect the TV-OUT jack on the recorder to the antenna input jack on your TV (VHF/UHF RF IN.) D Use the supplied audio/ video cables to connect the VIDEO(CVBS) /AUDIO- INPUT (red/white/yellow) jacks on the recorder to the matching VIDEO/AUDIO output jacks on the Cable Box/ Satellite Receiver. E Use the audio/video cables to connect the VIDEO(CVBS)/AUDIO - OUTPUT (red/whote/yellow) jacks on the recorder to the matching VIDEO/ AUDIO input jacks on the TV. F Use another set of audio/video cables to connect the CAM1/ L-AUDIO-R jacks on the front panel of the recorder to the to the matching VIDEO/AUDIO output jacks on the VCR. TIPS: Refer to the respective connected device s user manual for other possible connections. 22

23 Step 2: Optional Connections (continued) DV OUT A OR L R B Connecting a camcorder to the front jacks You can use the front jacks to copy camcorder recordings. These jacks are located behind the fl ap on the right which provides convenient connections. Option 1: Using the DV IN jack Use this connection if you have a Digital Video or Digital 8 camcorder. The DV jack conforms to the i.link standard. Use an i.link 4-pin cable (not supplied) to connect the DV IN jack on the front panel of the recorder to the appropriate DV OUT jack on the camcorder. Before you start operating, press SOURCE on the remote control repeatedly to select DV as the input channel. Helpful Hints: The DV IN jack does not support a connection to a Personal Computer. It is not possible to record from the recorder to your camcorder via the DV IN jack on your recorder. Option 2: Using the VIDEO In or S-VIDEO In jacks Use this connection if you have a Hi8 or S-VHS(C) camcorder or if your camcorder has only a single video output jack (Composite Video, CVBS.) A Use a video cable (not supplied) to connect the CAM 1 jack on the front panel of the recorder to the Video output jack on the connected video device. OR, Use an S-Video cable to connect the CAM 2 jack if the connected video device has the S-Video output jack. It provides better picture quality. B Use an audio cable (not supplied) to connect the AUDIO L/R jacks on the front panel of the recorder to the audio output jacks on the connected video device. Before you start operating, press SOURCE on the remote control repeatedly to select CAM1 or CAM2 as the input channel, depending on your connections. TIPS: Refer to the respective connected device s user manual for other possible connections. 23

24 Step 2: Optional Connections (continued) Connecting a USB flash drive or USB memory card reader You can view the contents of a USB fl ash drive / USB memory card reader through this recorder and record the contents onto DVD±R/±RW. See the chapter Recording Archiving from a USB fl ash drive or USB memory card. A Connect the USB fl ash drive / USB memory card reader directly to the USB port on the front panel (as shown in the above illustration.) B Press USB on the remote control to view the fi les stored in the USB fl ash drive or USB memory card reader. C To stop playback, press STOP or remove the USB fl ash drive / USB memory card reader from the USB port. Helpful Hints: The USB port only supports the playback of JPEG/MP3/WMA fi les. The USB port does not support the connection of other USB devices except to a USB fl ash drive / USB memory card reader. When the USB device does not fi t into the USB port, a USB extension cable is required. TIPS: Refer to the respective connected device s user manual for other possible connections. 24

25 Step 3: Installation and Setup Before you start... When you complete the connections and turn on the recorder for the first time, it is advisable that you make several basic settings. Please see the following pages on using the setup menu features to program TV channels, menu language and system clock settings. This will optimise the performance of this recorder. Setting the OSD language Select the menu language for this recorder s on-screen display. The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual. Language settings can only be changed when there is no disc in the disc tray. Finding the correct viewing channel SOURCE REPEAT DISC MENU USB SELECT TOOLS CLEAR OPEN/CLOSE ç ZOOM SETUP A Press STANDBY-ON on the recorder to switch it on. B Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen. You may go to Channel 1 on your TV, then press the Channel Down button on your TV s remote control until you see the Video In channel. You may press button repeatedly on your TV s remote control. Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV manual for more details. Or, set the TV to Channel 3 or 4 if you are using a RF modulator. OK A Press SETUP. The setup menu appears. B Use keys to highlight { Setup Menu - General } and press to access the menu. PLAY Setup Menu - General On Screen Display Language Screen Saver On Reset Menu Settings OK C Use keys to highlight { On Screen Display Language } and press OK to access its options. D Use keys to highlight the desired language and press OK to confi rm. TIPS: Press to go access the options of an item in the menu. Press SETUP to exit the menu. 25

26 Step 3: Installation and Setup (continued) Setting your TV channel programs Before the recorder can start recording the TV channel programs, you need to search for the available TV channels and store them in the recorder. Tuner settings can only be changed when there is no disc in the disc tray. C Use keys to highlight { Tuner Input Source } and press OK. { Cable } Select this if the DVD recorder is connected directly to the cable signal or through a set-top box. { Air } Select this if the DVD recorder is connected directly to an indoor or outdoor antenna. Before you start... Make sure you have successfully made all the required connections to the recorder, the TV and Satellite Receiver/ Cable Box (if any) and turned them on. OK SOURCE REPEAT DISC MENU USB SELECT TOOLS CLEAR OPEN/CLOSE ç ZOOM SETUP D Press OK to confi rm. E Select { Channel Search } and press OK. The automatic TV channel search starts. This process may take several minutes. Once complete, the total number of channels found and stored appears on the TV. To modify or sort the TV channels, see the chapter DVD System Menu Options CHANNEL SETUP settings. PLAY A Press SETUP on the remote control. The setup menu appears on the TV. B Use keys to highlight { Setup Menu - Channel Setup } and press. Setup Menu - Channel Setup Tuner Input Source Channel Search Modify Channel Information Cable Search Edit TIPS: 26 Press to go access the options of an item in the menu. Press SETUP to exit the menu.

27 Step 3: Installation and Setup (continued) Setting the date & time This recorder has an automatic date and time setting feature. If the recorder has not set the time and date correctly, you can further adjust the clock settings. A In setup menu, use keys to select { Setup Menu - Clock } and press. Setup Menu - Clock Date (mm / dd / yy) Time (hh : mm : ss) Date-Time Setting Time Zone Day Light Saving 01 / 01 / : 05 : 08 PM Manual Hawaii Adjust date and time manually A Use keys to highlight { Date-Time Setting } and press OK to access its options. B Use keys to highlight { Manual } press OK to confi rm. Off Select Time Zone A Use keys to highlight { Time Zone } and press OK to access its options. B Use keys to highlight the zone of your location and press OK to confi rm. Enable Day Light Saving mode A Use keys to highlight { Day Light Saving } and press OK to access its options. B Use keys to highlight { On } press OK to confi rm. To disable day light saving mode, highlight { Off } and press OK to confi rm. C Press SETUP to exit the menu. The basic installation is complete. To adjust the date, A Select { Date (mm/dd/yy) } and press OK to edit the fi elds. Use keys to change number and use keys to select different entry fi elds, then press OK to confi rm. You can also use the numeric keypad 0-9 on the remote control to key in the numbers. B Press OK to confi rm. To adjust the time, Select { Time (hh:mm:ss) }, repeat step A~B. TIPS: Press to go access the options of an item in the menu. Press SETUP to exit the menu. 27

28 Recording Discs for recording Several different types of recordable DVD discs can be used with this recorder: DVD±RW (DVD Rewritable) Discs that are rewritable can be used for multiple recordings once the existing data is erased. DVD+R DL (DVD+R Double Layer) Like the DVD+R, these discs can only be used for a single recording. The only difference is the capacity- 8.5GB. It offers two recordable layers on a single DVD disc. The layers are accessible from the same side of the disc, so recording can occur completely uninterrupted. Supported disc type and media speeds DVD±R (DVD Recordable) Discs can only be used for a single recording. Each new recording is always added at the end of all previous recordings as existing recordings cannot be overwritten. Editing can be done on DVD±R discs as long as they have not been fi nalized. To play a DVD±R on other DVD player, it must be fi nalized (see the chapter Editing/ Finalizing Recording Playing your recordings on other DVD players (DVD±R).) After this is done, no more data can be added to the disc. Disc Media speeds DVD+R 1x - 16x DVD+RW 2.4x - 4x DVD-R 1x - 16x DVD-RW 2.4x - 4x DVD+R DL 2.4x TIPS: 28 Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r).

29 Recording (continued) IMPORTANT! Unrecordable contents Contents with copy protection cannot be recorded on this recorder. When the recorder receives a copy guard signal, recording will be paused. A Press SETUP on the remote control. The setup menu appears on the TV. B Use keys to select { Setup Menu - Record } and press to confi rm. Recording settings The default recording settings allow you to set auto chapter markers, preferred recording input source and recording mode. Any changes made using the remote control will only apply to the current recording settings. The default recording settings will remain unchanged for the next recording. SOURCE REPEAT DISC MENU USB SELECT TOOLS CLEAR OPEN/CLOSE ç ZOOM SETUP Setup Menu - Record Auto Chapter Marker Default Recording Source Default Recording Mode On Tuner C Use keys to select the setting you wish to change and press OK to confi rm. Instructions and explanations of the options are provided in the following pages. D To exit, press SETUP. SP OK PLAY CH REC MODE TIMER EDIT VCR Plus+ TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r). 29

30 Recording (continued) RECORD settings (underlined options are the factory default settings) Auto Chapter Marker Automatically divides a recording (title) into chapters by inserting chapter markers at a specifi c interval. This enables you to access a specifi c point in the recording quickly. { On } Chapter markers will automatically be inserted within the title during recording at every 5 minutes interval. { Off } No chapter marker is inserted in the recording. Default Recording Source Defi ne your frequent source of recording. The recorder will switch to the default source whenever it is turned on. { Tuner } Input source from TV programs. { CAM1 } Input source from the device connected to the CAM1 and AUDIO L/R jacks on the front panel. { CAM2 } Input source from the device connected to the CAM2 and AUDIO L/R jacks on the front panel. { DV } Input source from the device connected to DV IN jack on the front panel. { EXT 1 } Input source from the device connected to the EXT1 VIDEO jack on the rear panel. { EXT 2 } Input source from the device connected to the EXT2 S-VIDEO jack on the rear panel. { EXT 3 } Input source from the device connected to the EXT3 Y Pb Pr in jacks on the rear panel. Note: To change the current recording source without changing the default setting, you can press the SOURCE button on the remote control. Default Recording Mode The recording mode defi nes the picture quality of recordings and the maximum recording time on a disc. The factory default setting is SP. Record Mode HQ SP SPP LP EP SLP Picture Quality High Quality Standard Play Standard Play Plus Long Play Extended Play Super Long Play Maximum Recording Time per Disc (hours)

31 Recording (continued) Recording from various sources You can record a TV program or copy the content from an external device to a recordable DVD disc. The storage capacity of the disc depends on the recording mode selected. SOURCE REC SOURCE REPEAT DISC MENU USB SELECT PLAY TOOLS CLEAR OPEN/CLOSE ç ZOOM Recording TV programs CH STOP CH+/- A Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) B Insert a recordable DVD into the recorder. C Press SOURCE on the remote control to select { Tuner }, then use P +/- keys to select the TV channel you wish to record. D Press REC z to start recording. If the disc contains some prior recordings, the new recording will automatically start after the last recording on the disc. To pause the recording, press PLAY/ PAUSE u. To continue recording, press REC z. You can use this function to avoid recording commercials. E To stop the recording, press STOP x. Recording from an DV camcorder Record video directly from a connected DV camcorder to a recordable DVD disc. A Connect the DV camcorder to DV IN jack on the front of the recorder. B Find the footage on the DV camcorder that you want to start recording and set the camcorder to pause mode. C Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) D Insert a recordable DVD into the recorder. E Press SOURCE on the remote control to select { DV }. F Press REC z to start recording and press the PLAY button on the DV camcorder to start playback. To pause the recording, press PLAY/ PAUSE u once. To continue recording, press REC z again. G To stop the recording, press STOP x. A new title will be created when you begin another recording. TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r). 31

32 Recording (continued) Recording from an external device (Camcorder/ VCR/DVD Player) Record video directly from an external device to a recordable DVD disc. Before you start... Set the preferred mode of recording before proceeding. See the section Recording Settings in this chapter. A Connect the external device to this recorder. See the chapter Step 2: Optional Connections. B Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) C Insert a recordable DVD into the recorder. D Press SOURCE repeatedly to select the correct input channel that matches the connected jack of the device. { EXT 1 } Input source from the device connected to the EXT1 - VIDEO jack on the rear panel. { EXT 2 } Input source from the device connected to the EXT2 - S-VIDEO jack on the rear panel. { EXT 3 } Input source from the device connected to the EXT 3 - Y Pb Pr in jacks on the rear panel. { CAM1 } Input source from the device connected to the VIDEO and AUDIO L/R jacks on the front panel. { CAM2 } Input source from the device connected to the S-VIDEO and AUDIO L/R jacks on the front panel. E Press REC z to start recording. Press REC z repeatedly to toggle between OTR 30, 60 or 90- minutes recording options. F Start playback on the connected device. To pause the recording, press PLAY/ PAUSE u once. To continue recording, press REC z again. You can use this function to avoid any unwanted recording. G To stop the recording, press STOP x. TIPS: 32 Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r only).

33 Recording (continued) Archiving from a USB flash drive or USB memory card reader Archive the contents from a USB device to a recordable DVD disc. USB SELECT SOURCE REPEAT DISC MENU USB SELECT TOOLS CLEAR OPEN/CLOSE ç ZOOM TOOLS CLEAR F Use keys to select { Copy to DVD } and press OK. The USB drive content menu appears. Archiving from USB to DVD Directory Japan trip Bryan Bday My songs Hot Hits Copy List Archiving from USB to DVD Directory Copy List..\Move up directory 1 Picture2.jpg Picture1.jpg Picture2.jpg Song1.mp3 NATURE-1.JPG BUTTER-1.JPG P JPG Music.mp3 MERLIO-1.JPG 2 Music.mp3 PLAY OK G Use keys to navigate within the menu and press OK to access the folder/ album. REC A Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) B Insert a recordable DVD into the recorder. (Use a DVD disc only for data archiving. Do not use a disc with video recordings.) C Connect the USB fl ash drive / USB memory card reader to the USB port on the front panel of the recorder. D Press USB on the remote control to view the fi les stored in the USB fl ash drive or USB memory card reader. E Press TOOLS on the remote control. The USB mode appears. Audio Type Mode Audio Audio Normal Stereo Search 00:00:00-00:00:00 USB CH Copy to DVD H To create a copylist, highlight the track/ fi le and press SELECT. The selected tracks/fi les will appear on the right { Copy List } screen. To remove the track/fi le from the copy list, press CLEAR. I Once the copy list selection is complete, press REC z to start archiving. A message will appear. Select OK in the menu and press OK to proceed. Helpful Hints: The USB port supports the playback of JPEG/MP3/WMA/DivX fi les. The USB port does not support the connection of other USB devices except to a USB fl ash drive / USB memory card reader. If the USB device does not fi t into the USB port, a USB extension cable is required. It is not possible to record content from a DVD disc to the USB drive. TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r only). 33

34 Recording (continued) Instant time-off recording This function allows you to make a recording with a preset length easily without using the timer programming. A Press REC repeatedly to toggle between OTR 30, 60 or 90- minutes recording options. B The recorder will stop recording at the designated end time and turn off to standby mode automatically. If you wish to stop the recording before the scheduled time, press STOP x. Watching another TV program during recording You can watch another TV channel while recording is in progress by using the TV s remote control to change the TV channels. Helpful hint: Remember to turn the TV back to its video input channel if you want to watch the TV channel through the recorder or playback the recorded disc. TIPS: 34 Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r only).

35 Timer Recording About timer recording Use the timer recording to automatically start and stop a recording at a later date/time. The recorder will tune to the right program channel and begin recording at the specifi ed time. With this recorder, you can schedule up to 20 recordings at a time. During timer recording, changing the channel that is being recorded is not possible. Timer recording (VCR Plus+ System) This is a simple timer programming system. To use it, enter the PlusCode programming number associated with your television program. You can fi nd this number in your TV listings magazine. All the information required by this recorder for programming is contained in the programming number. There are two ways to program a timer recording Using the VCR Plus+ system. Using manual timer schedule. A Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) B Press VCR Plus+ on the remote control. The VCR Plus+ System menu appears. TIMER REC MODE TIMER EDIT VCR Plus+ VCR Plus+ System Enter the PlusCode programming number for the show wish to record. CONFIRM CANCELOK C Use the numeric keypad 0-9 to enter the PlusCode programming number for the show you wish to record. (e.g. : or 5,312 4, key in ) To clear the PlusCode programming number, press CLEAR on the remote control. To cancel the PlusCode programming, use keys to select CANCEL in the menu and press OK. TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings on other DVD players(dvd±r only). 35

36 Timer Recording (continued) D To confi rm your entry, select CONFIRM in the menu and press OK. The VCR Plus+ program information will be shown on the timer editor menu. Timer Editor Source Rec Mode Mode Date Start End OK CANCEL OK 09 : 30 : 50 PM Ch003 SP Once 01 / 01 / : 30 PM 11 : 00 PM If the channel number of the TV program has not been assigned to the programming number, you will have to manually key in the channel number that is assigned to the PlusCode. Follow the instructions on the TV. E Press TIMER to exit the menu. F Insert a recordable DVD into the recorder. G Press STANDBY-ON to turn off the recorder to standby mode. The TIMER icon will light up on the display panel if a timer recording is set. If the recorder is not in standby mode, a notifi cation message will appear three minutes before the recording begins. Timer recording (manually) A Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) B Press TIMER on the remote control. The timer schedule appears. Timer Schedule : 30 : 50 PM Source Rec Mode Date Start End CH003 SP 05/01/ pm 03.30pm CH010 CH008 CH005 SPP SP SP 02/03/06 10/04/06 02/09/ pm 01.00am 12.30pm 06.30pm 01.30am 02.15pm C Select an empty fi eld and press OK. The timer editor menu appears. Timer Editor Source Rec Mode Mode Date Start End OK CANCEL OK 09 : 30 : 50 PM Ch003 SP Once 01 / 01 / : 30 PM 11 : 00 PM D Use keys or the numeric keypad 0-9 to select or enter the recording information, then press OK to confi rm. { Source } Select the TV channel or the correct input source (DV,EXT1, EXT2, EXT3, CAM1 or CAM2) which you have used to connect the external device. { Rec Mode } Select the mode of recording. See the chapter Recording RECORD settings - Default Recording mode for more information. TIPS: 36 Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings (DVD±R) on other DVD players.

37 Timer Recording (continued) { Mode } Select a desired repeat recording mode (Once, Daily, Weekly, Mon-Fri, Mon-Sat or Weekend.) { Date } Enter the date for recording (Month/Day/ Year.) { Start } Enter the start time of recording (hours : minutes.) { End } Enter the end time of recording (hours : minutes.) E Use keys to select OK in the menu and press OK. The system will store the timer entry and return to the timer schedule list. To cancel the above timer setting, move to CANCEL in the menu and press OK. F Press TIMER to exit the menu. G Insert a recordable DVD into the recorder. H Press STANDBY-ON to turn off the recorder to standby mode. The TIMER icon will light up on the display panel if a timer recording is set. If the recorder is not in standby mode, a notifi cation message will appear three minutes before the recording begins. Setting a timer recording from an external Cable Box/ Satellite Receiver If you have a Satellite Receiver/Cable Box connected to this recorder via the EXT2 S-VIDEO or EXT3 Y Pb Pr connection (see Step 2: Optional Connections ), follow the steps described below to program the recordings. A Select the channel you want to record at the Satellite Receiver/Cable Box. B Program the recording with the required information. Follow the steps A~H of Timer Recording (manually) on the previous page. Note: In { Source } entry, select { EXT 2 } or { EXT 3 } as the input source for recording. C Leave the Satellite Receiver/Cable Box turned on for the recording. Helpful Hint: Set the timer recording one minute ahead of the program s start time. This helps ensure the entire program is recorded as the disc requires about 30 seconds to prepare for recording. TIPS: Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings (DVD±R) on other DVD players. 37

38 Timer Recording (continued) Changing/ Deleting a timer recording A Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) B Press TIMER on the remote control. The timer schedule appears. Timer Schedule 09 : 30 : 50 PM Source Rec Mode Date Start End CH003 SP 05/01/ pm 03.30pm CH010 CH008 CH005 SPP 02/03/ pm 06.30pm SP 10/04/ am 01.30am SP 02/09/ pm 02.15pm C Use keys to select a timer program which you want to change/ delete. D To delete the timer entry, press CLEAR on the remote control. E To change the timer schedule, press OK to enter the timer editor menu of the selected timer program. Timer Editor Source Rec Mode Mode Date Start End 09 : 30 : 50 PM Ch003 SP Once 01 / 01 / : 30 PM 11 : 00 PM OK CANCEL OK F Select the entry fi eld and make the necessary changes. G Once complete, select OK in the menu and press OK. H Press TIMER to exit the menu. TIPS: 38 Ensure that there is enough space on the DVD±R/±RW before recording. Before you playback the DVD±R on another player, fi nalize the disc. See Playing your recordings (DVD±R) on other DVD players.

39 Playback Playable discs Using this recorder, you can playback and record on the following discs: Recording and Playback DVD±RW (DVD Rewritable); can be recorded on over and over again. DVD±R (DVD Recordable); can be recorded on only once. IMPORTANT! If the inhibit icon (Error) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same region as your player. Do not push on the disc tray or put any objects other than discs on the disc tray. It may cause the disc player to malfunction. DVD+R DL (DVD+R Double Layer); can be recorded on only once. Playback only: DVD Video (Digital Versatile Disc) CD-RW (CD-Rewritable) Audio/ MP3/WMA JPEG contents CD-R (CD-Recordable) Audio/ MP3/WMA JPEG contents Audio CD (Compact Disc Digital Audio) ReWritable Recordable MP3/WMA-Disc Video CD (Formats 1.0, 1.1, 2.0) Super Video CD DivX Disc (DivX 3.11, 4.x, 5.x, 6) TIPS: Some discs cannot be played on this recorder due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software. 39

40 Playback (continued) Starting disc playback A Press STANDBY-ON to turn on the recorder. B Press OPEN/CLOSE ç. The disc tray opens. C Place the disc onto the tray with the label facing up, then press OPEN/CLOSEç. D Turn on the TV to the correct viewing channel for the recorder (e.g. EXT, 0, AV.) E Playback may start automatically or a dialog box will appear on the TV (see next page.) If the pin code entry dialog appears on the TV, this means that the parental control was activated for the inserted disc. You have to enter your four-digit pin code (see DVD Setup Menu Options DVD Settings.) For more playback features, see Additional Playback Features. Playing a DVD video disc The DVD disc is usually formatted with a disc menu. You may have to make your selection (e.g., subtitle or audio language) within the disc menu. A Insert a DVD disc. If the disc menu appears, use the numeric keypad 0-9 to input your selection or use keys to select a play option and press OK to start playback. To access te disc menu Press DISC MENU on the remote control. To select the previous or next chapter During playback, pressí or ë. B To stop playback, press STOP x. Playing an audio CD A Insert an audio CD. Playback starts automatically. The track number and elapsed playing time appear on the display panel. B To stop playback, press STOP x. TIPS: Some discs cannot be played on this recorder due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software. 40

41 Playback (continued) Playing a (Super) Video CD (Super) Video CDs may feature PBC (Play Back Control.) This allows you to play the video CDs interactively by following the menu on the display. A Insert a (Super) Video CD. If the PBC is on, the disc index menu will appear on the TV B Use numeric keypad 0-9 to input your selection or to select a play option. Playing an MP3/WMA disc A Insert an MP3/WMA CD. The disc content menu appears. Audio Stop 0:00:00-0:00:00 Directory Playlist Bee Gees Phil Collins Bryan Adams Collin Raye Nat King Cole UB40 Eric Clapton Faith Hill To return to the previous menu, press BACK on the remote control. To turn on/off the Playback Control mode, press TOOLS on the remote control during playback to access the VCD menu. Then use keys to select { PBC On } or { PBC Off }. C To stop playback, press STOP x. Playing a recordable DVD disc A Insert a recordable DVD disc. The Index Picture screen appears. B Use keys to select a title to play, then press PLAY/PAUSE u. C To stop playback, press STOP x. Helpful Hint: If the message BLANK appears on the display panel, this means that there are no recordings on this disc. Note: It may require a longer time for the recorder to display the disc content menu on the TV due to the large number of songs/pictures compiled into one disc. B Use keys to navigate within the menu and press OK to access the folder/ album. C Use keys to select the track/fi le to play. To move up to the previous level, press BACK. D To create a playlist, highlight the track/fi le and press SELECT. The selected tracks/fi les will appear on the right screen. To remove the track/fi le from the playlist, press CLEAR. E To start playback from the playlist, move the cursor to the right selection screen and press u. F During playback, you can press í/ë to select the next/previous track. G To stop playback, press STOP x. Helpful Hints: Only the fi rst session of a multi-session CD will playback. This recorder does not support MP3PRO audio format. TIPS: Some discs cannot be played on this recorder due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software. 41

42 Playback (continued) Playing a picture disc (or musical slide show) You can display JPEG pictures in the selected roll automatically one after the other. A Insert a JPEG picture disc (CD, CD-R/RW, DVD±R/±RW.) The disc content menu appears. B Use keys to navigate within the menu and press OK to access the folder/ album. C To create a playlist, highlight the track/fi le and press SELECT. The selected tracks/fi les will appear on the right screen. To remove the track/fi le from the playlist, press CLEAR. D You can select to playback from the original disc content or from the playlist, just use keys to move to the correct screen before selecting the track/ fi le for playback. E During playback, press TOOLS twice on the remote control to access various settings for the slide show playback. File Play Type Mode Wipe Zoom Rotate PIC Normal Top to bottom Fitscreen Clockwise 0 Top to bottom Down to top Left to right Right to left Extend center V. F To stop playback, press STOP x. Playable JPEG picture disc File format: The fi le extension has to be.jpg,.jpe or.jpeg. Only DCF-standard still pictures or JPEG pictures e.g. TIFF are supported. Moving pictures, Motion JPEG, progressive JPEG, pictures in non-jpeg formats and including pictures associated with sound are not supported. PIC Normal Directory Japan trip Bryan Bday My songs Hot Hits Picture Playlist Program Stop Directory..\Move up directory 1 P JPG 2 P JPG 3 BUTTER-1.JPG 4 NATURE-1.JPG 5 BUTTER-1.JPG 6 P JPG 7 P JPG 8 MERLIO-1.JPG Picture Playlist If the disc contains MP3/WMA music and JPEG picture files, you can start a musical slide show playback, Select an MP3/WMA fi le and press OK to start playback, then select a picture fi le in the menu and press OK to start the musical slide show playback. TIPS: Some discs cannot be played on this recorder due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software. 42

43 Playback (continued) Playing a DivX disc This recorder supports the playback of DivX movies which you can copy from your computer onto a CD-R/RW, DVD±R/±RW or USB fl ash drive. A Insert a DivX disc. The disc content menu appears. If there are external subtitles available on the disc, you have to fi rst select the subtitle fi le from the fi le list. B Press PLAY/PAUSE u to start playback. During playback, you can press TOOLS to display the disc content menu. Helpful Hints: Subtitle fi les with the following fi lename extensions (.srt,.smi,.sub,.sami) are supported. It is normal to experience an occasional pixelation during DivX playback due to poor clarity of digital contents during internet downloading. Playing from a USB flash drive /USB memory card reader This USB port supports the playback of JPEG/MP3/WMA and DivX fi les. A Insert a USB fl ash drive or USB memory card reader into the USB port. B Press USB on the remote control to access the data in the drive. The content menu appears on the TV. C Use keys to navigate within the menu and select the fi le you want to play, then press OK. For more playback information, refer to the chapters on MP3/WMA and DivX playback in this user manual. D To stop playback, press STOP x or remove the USB fl ash drive / USB memory card reader from the USB port. TIPS: Some discs cannot be played on this recorder due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software. 43

44 Additional Playback Features Changing to another chapter/ track When a disc contains more than one track, title or chapter, you can change to a different track or chapter as follows. Searching forwards/ backwards You can fast forward or fast reverse a disc at two, four, sixteen or thirty two times the normal playback speed. During playback, Press ë (NEXT) to go to the next chapter/track. Pressí (PREV) to return to the start of the previous chapter/track. OR Use the numeric keypad 0-9 to input the title/chapter/track number. OR Press TOOLS to enter the fi le play (DVD, VCD) menu and use keys to select { Title } or { Chapter } and use numeric keypad 0-9 to input the title/ chapter/track number. Pausing playback A During playback, press PLAY/PAUSE u to pause playback. B To resume normal playback, press u again. A During playback, press à (REW) or á (FFW) to switch to the search function. The search status bar appears. It displays the search speed. The sound will be muted. B Press à (REW) or á (FFW) to cycle through the search speeds. C To resume normal playback, press PLAY/PAUSE u. Zooming in (Only available during playback of still picture discs.) This option allows you to enlarge the picture on the screen and pan through the enlarged picture. A Press ZOOM repeatedly on your remote control to activate zoom. B Use keys to pan through the zoomed picture. C To exit, press ZOOM until the picture returns to the normal size. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 44

45 Additional Playback Features (continued) Using the TOOLS options SELECT OK REC SOURCE REPEAT DISC MENU USB SELECT PLAY TOOLS CLEAR OPEN/CLOSE ç ZOOM CH TOOLS SETUP DISPLAY Menu options displayed may differ depending on the disc type. A During disc playback, press TOOLS on the remote control. The Tools menu appears. DVD 00:22:03 / 01:30:26 Mode Normal Title 01/02 Chapter 03/12 Audio 01/02 - OTH Subtitle Off Angle 01/03 Title 00:22:03 / 01:30:26 B Use keys to select the setting you want to adjust. Instructions and explanations of the options are provided in the following pages. If the selection in the menu is greyed out, that means the feature is not available or cannot be changed in the current state. Press DISPLAY on the remote control to hide or show the DVD menu. C To exit, press TOOLS. Selecting various repeat/ shuffle functions You can select various repeat play or random play mode during playback. During disc playback, press REPEAT repeatedly to toggle through the options on the disc. OR, A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Use keys to select { Mode } and press OK. C Use keys to select one of the repeat options. { Repeat A-B } (DVD/VCD) Repeat the playback of a specifi c segment within a title/chapter/track. Press OK to mark the start and end of the segment you want to repeat. { Repeat Chapter } Repeat playback of the current chapter (DVD, DVD±R/±RW only.) { Repeat Track/Title } Repeat playback of the current track/title. { Repeat Directory } Repeat playback of the current folder/ directory (MP3, JPEG, picture disc only.) { Repeat Disc } Repeat playback of the entire disc. (MP3, JPEG, SVCD and CDDA discs only.) { Shuffle } Randomly playback all the tracks within the disc (MP3 and audio CD only.) { Normal } Cancel the repeat or programmed modes and return to normal playback. D To cancel repeat playback, press STOP x or select { Normal } and press OK. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 45

46 Additional Playback Features (continued) Creating a playlist You can play the contents of the disc in the order you want by creating a playlist. A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Select { Mode } > { Program }. The program menu appears. Edit Program Play List Title Title 01 Title 02 Title 03 Title 04 Title 05 Title 06 Title 07 Title 08 Playlist C If the disc is recorded with Titles/Folders/ Albums, press OK to access the tracks/ fi les/chapters. D Use keys to select the track/fi le/ chapter and press SELECT on the remote control. The selected track/ fi le/ title will appear in the { Playlist } screen at the right. Changing the audio language This operation works only on DVDs with multiple soundtrack language or VCDs with multiple audio channels. During disc playback, press AUDIO repeatedly to toggle through the audio channels on the disc. OR, A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Use keys to select { Audio } and press to access its options. C Use keys to select the audio language and press OK to confi rm. The languages may be numbered or abbreviated, such as En for. If the language selected is not available on the disc, the disc s default setting for language will be used instead. Helpful Hint: Some DVDs allow soundtrack language changes only via the DVD disc menu. To access the Disc Menu, press DISC-MENU. To remove from the playlist E Move to the right screen, select the item to remove and press CLEAR on the remote control. F To start playback from the playlist, move to the right screen and press OK. Playback will start from the selected track/ fi le/ chapter according to the order of the playlist. G To exit playlist play, press STOP x. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 46

47 Additional Playback Features (continued) Changing subtitle languages This operation works only on DVDs with multiple subtitle languages, you can change the language you want while playing the DVD. Switching camera angles This option is only available with DVDs that contain sequences recorded from different camera angles. This allows you to view the picture from different angles. During disc playback, press SUBTITLE repeatedly to toggle through the language options on the disc. OR, A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Use keys to select { Subtitle } and press to access its options. C Use keys to select the language and press OK to confi rm. The languages may be numbered or abbreviated, such as En for. If the language selected is not available on the disc, the disc s default setting language will be used instead. Helpful Hint: Some DVDs discs allow subtitle language changes only via the DVD disc menu. To access the disc menu, press DISC-MENU. A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Use keys to select { Angle } and press to enter its options. The camera angles available for selection appears. C Use keys to select the camera angle you want to switch to, and press OK to confi rm. Searching by time This option allows you to skip to a specifi c point on the current disc. A During disc playback, press TOOLS on the remote control. The Tools menu appears. B Use keys to select { Search } and press to time fi eld (hours : minutes : seconds.) C Use the numeric keypad 0-9 to enter the time where playback should start and press OK. Playback skips to the time entered. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 47

48 Editing/ Finalizing Recording About disc editing This recorder offers various disc edit options for various disc types. You can change the disc content and settings of a recorded DVD from the disc editing menu. The edited contents may not be available when you play the disc on an another DVD player. The displayed options in the disc editing menu differ depending on the type of disc. { Play } Start playback from the beginning of the disc. { Rename Disc } Change the name of the disc. { Erase Disc } - DVD±RW only Erase all the recordings on the disc. { Record New Title } Start recording from the last empty title on the disc. { Overwrite Disc } - DVD±RW only Start a new recording from the beginning of the disc, all the recorded content will be overwritten. { Make Compatible } - DVD±RW only To ensure the edited changes remain when the disc is played back on another DVD player. (eg., hidden chapters to remain hidden.) { Lock/Unlock Disc } - DVD±RW only Lock or unlock a disc to prevent accidental erasure or changes being made. { Finalize Disc } - DVD±R only Finalize the disc to enable playback on other DVD players. Further recording and editing to the disc are not allowed. It is not possible to unfi nalize the disc. Accessing disc editing menu A Insert a recorded DVD into the recorder. The Index Picture screen appears on the TV. B Select the fi rst title on the disc, press on the remote control. The disc editing menu appears. C Press on the remote control to display the disc editing options. The available editing options are different for DVD±R and DVD±RW discs. Play Rename Disc Erase Disc Record New Title Overwrite disc Make Compatible Lock Disc Finalize Disc D Use keys to access different options and OK to select. Instructions and explanations of the options are provided in the following pages. E To exit from the disc editing menu, press once to exit from the disc editing menu. Press to return to the disc Index Picture menu. TIPS: 48 No further recording and editing can be carried out on a full or fi nalized DVD±R. Press to go back to the previous menu. Press DISC MENU to exit.

49 Editing/ Finalizing Recording (continued) Rename disc The original disc name is generated automatically by the recorder. You can change the disc name by following the steps below. Erase disc (DVD±RW only) This erases the content of the DVD±RW including those that was not recorded on this recorder. Once the existing content is erased, it can be used for recording. A In disc editing menu, use keys to select { Rename Disc } and press OK. The keyboard screen appears. B Use keys to highlight a character on the keyboard and press OK to select. The maximum input is up to 20 characters. You can use the following keys on the keyboard screen to edit your input: BkSp : to remove the character to the left of the cursor. Delete : to remove the character to the right of the cursor. Space : to create a space between characters. Caps : to toggle between upper and lower case characters. Clear : to clear the entry fi eld completely. C To confi rm your entry, select OK on the keyboard and press OK. The info panel is now updated. To cancel the changes, select EXIT on the keyboard and press OK. A In disc editing menu, use keys to select { Erase Disc } and press OK. A warning message will appear. B Select YES in the menu to proceed or NO to abort, then press OK to confi rm. Record new title This function allows you to start a new recording at the remaining empty space in the DVD±RW. A In disc editing menu, use keys to select { Record New Title } and press OK. B Select the source you want to record from and press REC z to start recording. Overwrite disc (DVD±RW only) This function allows you to start a new recording from the beginning of a DVD±RW regardless of the contents of the disc. A In disc editing menu, use keys to select { Overwrite disc } and press OK. B Select the source you want to record from and press REC z to start recording. TIPS: No further recording and editing can be carried out on a full or fi nalized DVD±R. Press to go back to the previous menu. Press DISC MENU to exit. 49

50 Editing/ Finalizing Recording (continued) Make compatible (DVD±RW only) The edited DVD±RW may still display the original titles or hidden scenes when played back on other DVD players. This function enures that the edited changes of the DVD±RW remain when played back on other players. In disc editing menu, use keys to select { Make Compatible } and press OK to confi rm. Helpful Hint: If the option {Compatible} is not available for selection, it means that the disc is already compatible. Lock/Unlock disc (DVD±RW only) You can choose to protect the recorded DVD±RW in order to prevent accidental loss of recordings. A In disc editing menu, use keys to select { Lock Disc } and press OK. The disc is locked for this DVD recorder only. When the disc is locked, the option in the disc editing menu will change to { Unlock Disc }. B If you want to overwrite or edit on the protected disc, select { Unlock Disc }. Playing your recordings on other DVD players (DVD±R only) It is necessary to fi nalize a DVD±R disc before you can play it on another DVD player. Otherwise, the DVD±R will only playback on this recorder. After a DVD±R disc has been finalized, no further recordings or editing can be made to it. Make sure that you have completed all the recordings and editing before finalizing the disc. A In disc editing menu, use keys to select { Finalize Disc } and press OK. A warning message will appear. B Select YES in the menu and press OK to start the process. Finalization will take a few minutes, depending on the length of recordings. Do not try to open the disc tray or turn off the power as this may render the disc unusable. Otherwise, select NO in the menu and press OK to abort the operation. TIPS: 50 No further recording and editing can be carried out on a full or fi nalized DVD±R. Press to go back to the previous menu. Press DISC MENU to exit.

51 Editing/ Finalizing Recording (continued) About title editing You can change the individual title information or delete a title (recording) in a recorded DVD. If a DVD±R has been fi nalized, it cannot be edited. Accessing title editing menu A Insert a recorded DVD into the recorder. The Index Picture screen appears on the TV. The displayed options in the title editing menu differ depending on the type of disc. { Play Title } Start playing a recording. { Edit Title } Access the video editing menu. { Rename Title } Change the name of the recording. { Erase Title } - DVD±RW only Delete the title (recording.) { Overwrite Title } - DVD±RW only Start a new recording, the existing title (recording) will be overwritten. { Overwrite Disc } - DVD±RW only Overwrite from the selected title onwards to the end of the disc. { Append Title } Insert a new recording to the last existing recording. During playback, press DISC MENU to access the Index Picture screen. B Use keys to highlight a title (recording), and press. The title editing menu appears. 1. My movie 01 / 01 / : 31 : 53 HQ 00 : 05 : Nature 03 / 02 / : 30 : 00 SP 01: 05 : 59 Empty Title SP 01:30:50 Play Title Edit Title Rename Title Erase Title Overwrite Title Overwrite Disc Append Title C Use keys to access different options and OK to select. Instructions and explanation of the options are provided in the following pages. D To exit, press. Video editing This feature allows access to the video editing menu. See the chapter Editing/ Finalizing Recording About video editing for more information. In title editing menu, use keys to select { Edit Title } and press OK. The video editing menu appears. The recorder will play the selected title. TIPS: No further recording and editing can be carried out on a full or fi nalized DVD±R. Press to go back to the previous menu. 51