CONTENTS ABOUT DVD 3 ABOUT PLAYER 4-5

Transcription

1

2 CONTENTS ABOUT DVD 3 ABOUT PLAYER

3 WARNINGS Use a separate power socket, one not sharing with others electrical appliances. Do not dismantle, repair or re-assemble the machine yourself. Remove the power plug when the machine is not in use to save electricity. Do not use the machine either below 100V or above 240V. When the voltage is below 100V, the machine may not work and its longevity will be affected adversely. When the voltage is above 240V, the machine may explode or cause a fire. Maintain and look after the power cord. In order to ensure your safety, do not pinch, twist, pull, lengthen or subject the cord to pressure or abuse. Do not wet the machine or use it in a bathroom or other humid environments to avoid an accident or damage to the machine. 1

4 PRECAUTIONS Positioning Although the machine does not produce much heat, ensure that you leave at least a 5cm space around the machine for ventilation. Do not locate the machine in an unstable place, in a hot or sunny place, or in a humid or dusty place. Caution Do not operate the machine outdoors in rainy or humid conditions to avoid electrical leakage, a short circuit or unforeseen accidents from happening. Thunder If the machine does not work in bad or thundery weather, remove the plug from the power socket, wait a minute and then re-insert the power plug. Cleaning & Maintenance Use a soft cloth or a cotton bud dipped in a diluted, neutral cleanser to gently wipe the cover of the machine. Do not use any abrasive cloths, harsh cleansers or volatile chemical solutions Small Objects/Liquids If any small objects or liquids drop into the machine or if the machine emits smoke or otherwise behaves abnormally, disconnect the machine immediately and send it to an authorised service center for repair. Relocation Remove the disc prior to relocating the machine to ensure the safety of the disc and the machine. Re-packaging Please use the original packaging materials to repackage the machine in order to minimize vibration during transit. 2

5 INTRODUCTION DVD (Digital Versatile Disc) is a digital video medium in the MPEG II format, featuring a variety of revolutionary entertainment capabilities. The MPEG II video compression technology provides capacity for an excellent picture of a minimum 500 lines on-screen resolution, up to 8 language soundtracks, up to 9 views from different camera angles and up to 32 language subtitles (provided by the DVD discs which supports these features). DVD CD Digital/MPEG II Digital Single layer / Single side (4.7 GB = 2 hrs) Single layer / Double sides (8.5 GB = 4 hrs) Double layers / Single side 650 MB = 74 mins (9.4 GB = 4.5 hrs) Double layers / Double sides (17 GB = 8 hrs) 12 cm / 8 cm 500 lines up Each DVD disc contains various features depending on the production of the disc. Below are some of the symbols representing the features: Number of Audio Tracks Number of Subtitles Angle Indicator Screen Format Zoom DVD discs and DVD players are manufactured in accordance with the worldwide agreed DVD regional code system that states the player will operate only with corresponding discs of the same regional code. 1 Canada, USA 2 Europe (incl. Poland, Romania, The Czech Republic, Japan, Middle East (incl. Saudi Arabia, Egypt, Iran, South Africa) 3 East Asia (incl. Hong Kong, Taiwan, South Korea), South East Asia 4 Australia, Caribbean, Central & South America, Mexico, New Zealand 5 Africa, Russia, India, North Korea, Pakistan, Turkmenistan 6 China Video discs contain high-density compressed data that need proper handling Hold the disc with your fingers. Hold the disc s outer edge and/or the center spindle hole. Do not touch the disc surface. Do not bend or press the disc. Do NOT expose the disc to direct sunlight or heating sources. If a video recorder is connected to the player, the video output image will be distorted during recording. Some features contained in this DVD player are related to the DVD disc s software. Check the features printed on the disc s packaging or follow the on screen menu instructions of the disc. Store discs vertically in a dry cabinet. Clean the disc surface with a soft, dry cloth. Wipe the disc surface gently, radiating from the center toward the outer edge. Do not apply thinners, alcohol chemical solvent or sprays when cleaning. Such cleaning fluids will permanently damage the disc surface. 3

6 INTRODUCTION 01. DVD DOOR 02. OPEN / CLOSE 03. DISPLAY WINDOW 04. PLAY / PAUSE 05. POWER 06. USB 07. MIC 01. SUBWOOFER 02. S-R SURROUND RIGHT 03. F-R FRONT RIGHT 04. AUX RIGHT 05. CENTER 06. S-L SURROUND LEFT 07. F-L FRONT LEFT 08. AUX LEFT 09. VIDEO 4

7 INTRODUCTION 1. POWER 2. NUMBER KEY 3. SETUP 4. SEARCH REVERSE/FAST BACKWARD 5. MENU 6. REV/SEARCH- 7. SOURCE 8. PREV/RADIO- 9. V-MODE 10. STOP 11. CH-LEVEL 12. PROG 13. OSD 14. USB/DISC 15. TITLE 16. RIP/COPY/MO/ST 17. OPEN/CLOSE 18. A/B 19. ANGLE 20. PBC 21. SLOW 22. GOTO 23. ZOOM 24. OK 25. MUTE 26. FWD/SEARCH+ 27. NEXT/RADIO+ 28. VOL +/- 29. PLAY/PAUSE 30. S.EFFECT 31. TONE 32. STEP 33. REPEAT 34. SUBTITLE/AUTO 35. AUDIO/MEMORY 1. The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared sensor during operation. When the sensor is covered or there is a large object between the remote control and the sensor, the sensor cannot receive signals. The sensor may not be able to receive signals properly when it is exposed to direct sunlight or a strong artificial light (such as a fluorescent or strobe light). In this case, change the direction of the light or reposition the unit to avoid direct lighting. 5

8 SYSTEM CONNECTION AUX input Please connect from other audio output device connect the AC power socket to the wall outlet before the system connection is completed. 6

9 GETTING STARTED Unpack the unit. Read through this user manual before installing and using. Load batteries into the remote control unit. Connect the system and make sure the connections are secure. Connect the power plug to the AC power outlet Loading batteries into the remote control Remove the battery compartment cover. Load two AAA (UM-4 or R03) batteries into the battery compartment. Make sure that the batteries have been inserted with the correct polarities matching to the symbols +/- marked in the battery compartment. Close the battery compartment cover. When replacing batteries, replace both batteries. Do not mix new and used batteries operating together; otherwise, the operation lifetime will be much shorter than normal. Remove batteries if the unit will not be used for a prolonged period of time. The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared sensor of the unit during operation. If the sensor has been covered or there is a large object between the remote control and the sensor, the sensor will not respond. The sensor may not be able to receive the remote signal when it is exposed to direct sunlight or a strong artificial light (fluorescent or strobe light). In this case, change the direction of the light or reposition the unit to avoid direct lighting. Switch on the Player Press the main power switch on the DVD player. Power on the TV set and the amplifier, if connected. Setup the System Select the corresponding setting on the TV set (AV1, AV2, S-Video, DVD, etc). If your connection is through a RF modulator, switch the channel where the DVD screen appears. If an amplifier has been connected, switch to the correct output mode. Load a Disc Press OPEN/CLOSE button on the remote control (or front panel) to eject the disc tray. Load a disc, label side up, onto the disc tray and press OPEN/CLOSE button. Automatic Playback The unit will take a few seconds to load the disc s initial data. It will then display the disc type logo on the left upper corner on the screen and then start playing back automatically. NOTE Normally, when a MP3 disc is loaded, the player will take a longer time to load. If a DVD disc menu appears on the screen FM operation Press the PLAY button on the remote (or on the unit) to start playing. Press the DIRECTION buttons to select the desired feature in the menu and then press the ENTER button to confirm a selection in the menu. Press SOURCE to select to FM function. Press this button once briefly to select previous channels,press it 3 to 5 seconds to search 100KHz step up counter manually. Press this button briefly to select previous channels,press it 3 to 5 seconds to search 100KHz step up counter manually. Press VOL+ or VOL- to set the desired volume. AUX operation: Press SOURCE to select to AUX function. 7

10 GETTING STARTED The following message will display on the screen when there is a problem with the format of the disk loaded: Region code of the disc does not match the player s region code (region 1 6) The rating level of the disc is higher than the rating level setting of the player. The player will not play the disc. The player is equipped with automatic disc quality detection software. When the player detects a problem disc or a damaged disc, the player may keep playing the disc at a lower quality or stop playing depending on the damage level of the disc. Production quality of DVD discs vary, some discs may deviate from the industrial standard. Some incorrectly formatted discs may play back on the player, however, the playback and operational quality of those discs may be substandard. For safety reasons, unplug the DVD player if you intend not to use it for an extended period of time. 8

11 FUNCTION BUTTONS Press this button to open or close the disc tray. You can also do this on the front panel. To play a disc in a desired sequence: Press PROG to enter the program menu. In DVD mode When the program menu appears, input the title and press OK. Then input the chapter number and press OK. (PLAY) Move the cursor to START and then press the PLAY or OK button to start program play. Press PROG button to quit the program menu. While playing a DVD, press the TITLE button to return to the beginning of the DVD disc. While playing a DVD,press the MENU button to return to the DVD disc start menu Some DVD discs refuse the MENU/TITLE function To search for a desired Title, Chapter or Track. In DVD mode Press the GOTO button once and the following will appear: Press the GOTO button twice and the following will appear: Press the GOTO button three times and the following will appear: In VCD mode In PBC mode, press the PROG button and the program menu appears. Input the track number and press OK when the programming is completed. Some DVD discs do not allow program setting. Single track discs cannot be programmed. Under DVD mode,press this button to switch CVBS Press SETUP and go to AUDIO SETUP for adjusting KEY,ECHO,And MIC VOLUME DVD disc start menu may contain the setup of Screen Format, Multi-angle Viewing and Zoom functionality. The picture quality will decrease as the picture size increases Press the OK button to execute the search 1. To directly access a DVD chapter or a CD track, input the desired chapter or track number using the numeric key pad. 2. Input data for the DVD disc start menu or the player s setup menu Some DVD discs do not allow direct access function. The unit will copy or rip the content or song from CD to USB In FM mode, press to select mono or stereo sound 9

12 FUNCTION BUTTONS Press AUDIO (MEMORY) to switch between L MONO/R MONO and Stereo when reading a VCD discs. Press AUDIO (MEMORY) to choose the audio language (e.g. Chinese, Portuguese, Spanish, English, etc.) when reading DVD discs. In radio mode pressing this button can store the channel. Press SUBTITLE to switch to different subtitles (e.g. Chinese, Portuguese, Spanish, English, etc.) when reading DVD discs. In radio mode,,press AUTO button to automatically search for a radio station. While playing back a DVD disc, press the ANGLE button repeatedly to select the desired camera angle. A DVD disc may contain up to 9 selectable camera angles. In the DVD disc mode menu or in the player s setup menu, press the DIRECTION button to highlight function icons. Press the OK button to confirm selection. Press SOURCE to select between DVD, FM and AUX mode. Play Press this button to play the disc. Pause Press this button to pause the disc. Press again to resume normal playback. This button has 2 modes. 1. Press the STOP button once and the player memorizes the interrupted position and the OSD shows PRESTOP. When the PLAY button is pressed, the player will resume where it was interrupted. 2. Press the STOP button again to completely stop the disc. The OSD shows STOP. When the PLAY button is pressed, the disc will start from the beginning. During play, press the PREV key to go back to the start of the chapter. Each time that you press this key it will skip a chapter until it is at the beginning of the disc. Each press of NEXT key during play will skip the current chapter and play the next one. In RADIO mode The PREV and NEXT keys will switch the RADIO channels. While playing back a disc, press the VOLUME button or + to adjust the volume output. Volume level will display on screen, e.g. Press button to skip backward through the disc. Each time the button is pressed, the fast reverse motion speed changes. Press button to fast forward through the disc. Each time the button is pressed, the fast forward motion speed changes. In RADIO mode The two keys can fine tune the CF frequency. The player is muted in fast forward or fast backward mode. Player will not fast forward/backward during WARNING section of a DVD disc. Press CH-LEVEL can switch FL,FR,SL,SR,CT,SW And also can adjust the volume through VOLUME button. Press or mute off. button to select mute on Press S.EFFECT for EQ function in VCD, CD, DVD, MP3 and MP4. The EQ in STANDARD, CLASSIC, ROCK, JAZZ and POP can be switched using the DIRECTION buttons. Press the OK button to confirm the setting. Press this key to switch DVD mode and USB mode TONE Invalid Key 10

13 FUNCTION BUTTONS Repeatedly plays back the desired Title, Chapter or Track. Press the ZOOM button repeatedly and the TV will display: Press REPEAT button to toggle between different repeat modes. In DVD mode REPEAT A CHAPTER REPEAT A TITLE REPEAT OFF REP: [CHAPTER] REP: [TITLE] REP: [OFF] In CD/MP3 mode REPEAT A TRACK REPEAT 1 REPEAT A DISC REPEAT ALL REPEAT OFF REPEAT OFF Some DVD discs do not allow the REPEAT function. When playing a VCD disc, REPEAT will only work in PBC off mode only. To repeat playback of a specific section of a disc: Press the A-B button at the starting point of the desired section. will display on the screen. Press the A-B button again at the end of the desired section, will display on screen. The selected section from A to B will be played back repeatedly until the function is cancelled. The picture quality decreases as the picture size increases. Press to return to the START menu when playing a VCD disc. Press to play in slow motion. Press once to play at1/2 of the normal playing speed; press twice to play at 1/3 of the normal playing speed; press three times to play at 1/4 of the normal playing speed; press four times to play at 1/5 of the normal playing speed; press five times to play at 1/6 of the normal playing speed; press six time to play at 1/7 of the normal playing speed; press seven times of press the[play/pause] button to return to normal playing speed To cancel the function, press the A-B button again to return to normal play. Some DVD discs do not allow A-B function. Repeat A-B does not apply to MP3 discs. Press this key when playing a DVD disc and the screen will show the title, chapter and length in play. Press this key again to toggle between the display of the elapsed time, the playing time and the remaining time of this section and title. Continue pressing STEP to realize slow playing under VCD and DVD disc. 11

14 MP3/ PICTURE DISC PLAYBACK When a MP3/KODAK disc is loaded, the following will display on the screen: Current directory name Current MP3/JEPG file name. If a JPEG file is playing the name should have a JPEG extension. File Switch Region:Displays the file type of the playing and the switching Press to select the file when the cursor appears in file window. Press select to play the current file select by the cursor. Press to switch between the directory window and the file window. Note:The player will not function correctly under the following condition: 1.The disc is badly scratched,damaged or dirty. 2.The disc is not finalized. 3.The recording format is not supported by the player. The playing file is a JPEG picture file. Picture Disc play back instructions Insert the disc,there will be a catalogue menu on the TV screen.press button to move the cursor to the left catalogue. Next Press buttons to move the cursor to the title you want and press"ok". Move the cursor to the right catalogue and press"ok",you can display the picture you selected or press "PLAY" button to display the images in order. When playing, press "ZOOM" button, the picture can be enlarged or dwindled to the rate of 2,3,4,1/2,1/3,1/4.Press "ZOOM" button again, it will return to normal view. When Zoomed in or out, use the direction buttons to change or navigate the enlarged image. When playing, press the RETURN button to go back to the catalogue menu. Using the direction buttons to move the cursor to choose the catalogue. Then pressing PBC button can start the six-picture playing function. By using the number or direction buttons and pressing PLAY button,it can continue to play orderly When in six-picture condition, press the PREVIOUS button or NEXT on the remote control, you can see the picture of the next page up and down. When in six-picture playing condition,pressing RETURN button can return to the six-picture condition, press it again will return to the catalogue menu. When in photo playing condition, press the PREVIOUS NEXT can choose the previous or the next photo When playing,press the button PROGRAM to switch to the 17 pictures display mode. Ripping instructions Under the condition of OPEN or POWER OFF connect the USB and then put the CD DISC in and then play When playing the CD, press RIPPING key and enter into the main operation interface, using the direction key and ENTER key to change the record. In the OPTIONS menu, The user can choose the exact song to record In the START menu, after confirming the information without any mistake, press Enter key to enter into the recording process After finishing the record, exit by pressing QUIT and press USB/DISC key to read or play the recorded contents 12

15 SETUP MENU Using the setup menu, you can select the play mode setting and the various outputs, etc. In each menu page, the menu items are shown on the left. Use the button on the remote to go to the option list or setting on the right. Use the button to go back to the left menu item. 1. Press the SETUP button on the remote and the current setup menu appears on the screen. According to the system of the TV to be connected, set the system of the unit to have it match the TV. Press SETUP button, the screen shows: Press ENTER on the remote, the setup menu screen shows. Press ENTER to select TV SYSTEM,SCREEN SAVER,VIDEO,TV TYPE,PASSWORD,RATING,DEFAULT 2. Select the main menu item desired using, then press OK, the selected main menu item is highlighted and its option list is shown on the screen. 3. Press to go to the option list. 4. Select the option desired using, then press the OK button. 5. Use to go back to the left menu item. 6. Press the button SETUP to leave the setup menu main page. 1.If the system of the TV is NTSC, select NTSC; 2.If it is PAL, select PAL; 3.If it is AUTO, select AUTO. SCREEN SAVER : Turn the SCREEN SAVER on. The Disc will play automatically. : Turn the SCREEN SAVER off. SYSTEM SETUP TV SYSTEM 13

16 SETUP MENU VIDEO INTERLACE: Video output through CVBS(Video),S-Video and interlace video from Component(Y/Pb/Pr)output P-SCAN: Video output through Component(Y/Pb/Pr)output PASSWORD ON: When password is unlocked, RATING can be selected. When password is locked, RATING cannot be selected If you want to change the password, follow this steps: 1.Enter the password 8888 when the unit is turned on, press OK 2.Enter the new password, Press OK, 3.New password change completed and locked TV TYPE Choose this setting and the movie will fill the entire TV screen with some parts to the left and the right cut off. Choose this setting if you want to see movies in their original aspect ratio. You will see the entire frame of the movie, but it will occupy a smaller portion of the screen. Choose this setting if your DVD player is connected to a wide screen TV. Press RATING button to select the rating. DEFAULTS If you select RESTORE, each function setting returns to the initial status set by the factory. 14

17 SETUP MENU LANGUAGE SETTINGS Press SETUP button to select LANGUAGE OSD LANGUAGE ENGLISH The on screen display language is English RUSSIAN The on screen display language is Russian AUDIO SETUP SELECT LANGUAGE If a language mentioned is recorded on the disc, you can select sounds, subtitles or disc menu languages. If not, the language recorded on the disc is shown. 15

18 SETUP MENU MIC SETUP : Auto select the voice input. : Disable the MIC. MIC VOL Use UP/DOWN button to adjust the microphone volume. PROLOGIC The open state will play stereo audio source, which evolved into virtual 5.1 output. When in closed state, broadcast source for stereo is active,broadcast source for 5.1 the power output is 5.1 DOWNMIX Use the UP/DOWN button to adjust LT/RT, STEREO, VSS, 5.1CH of the downmix. Use ECHO to adjust the echo effect. SUBWOOFER ON:Turn on the SUBWOOFER,SUBWOOFER a voice output. OFF:Turn off the SUBWOOFER,SUBWOOFER on voice output. 16

19 SETUP MENU VIDEO SETUP Press UP/DOWN buttons on the remote to select VIDEO SETUP. SATURATION Use UP/DOWN button on the remote to set saturation. BRIGHTNESS Use UP/DOWN button on the remote to set brightness. SHARPNESS Use UP/DOWN button on the remote to set sharpness. CONTRAST Use UP/DOWN button on the remote to set contrast. FONT COLOR Use UP/DOWN button on the remote to set the colour of the font. HUE Use UP/DOWN button on the remote to set hue. FONT BACK COLOR Use UP/DOWN button on the remote to set the colour of the font back. 17

20 SETUP MENU DIGITAL SETUP The DVD player must be in the stop mode to access the DIGITAL SETUP menu. You have to press the STOP button twice to go into stop mode DYNAMIC RANGE When the compression mode is set to LINE OUT, this setting can be used to adjust the linear compression rate, to obtain the different compression results of the signals. Press the UP/DOWN buttons on the remote to select DIGITAL SETUP from the SETUP menu. Press the ENTER button to enter the submenu. OP MODE LINE OUT: Line out mode, with digital dialog normalisation, compresses input signal linearly. RF REMOD: RF remodulation mode, with heavy decompression and digital dialog normalisation. DUAL MONO This is the output mode of the L and R signals of the set audio output. If it is set to MIX-MONO, the function only works when the DVD being played is a 5.1- channel DVD. 18

21 TROUBLESHOOTING Should your HOME THEATRE develop a problem, please check below for possible quick solutions: Symptom Check and Action No power. Check if the power cord has been properly connected to the power outlet. Check if the main power on the DVD player has been switched on. Remote control does not work. Make sure that the main power button on the DVD player has been switched on. Does not play No disc, load a disc. Disc has been loaded upside down. Place the disc with the label side up. Disc s region code does not match to the player. Disc s rating level is higher than the player s rating level setting. Disc is not correct type for the player. Disc is damaged or dirty, clean the disc or try another disc. Moisture may be condensed inside the player. Remove the disc and leave the unit power on for one or two hours. No picture Check if the TV set is powered on. Use the TV remote to select A/C signal for DVD rather than broadcast. Check if the system is correctly and securely connected. Check if the connection cables are damaged. Clean the disc. Please press OPEN, then press PROGRAM and ZOOM button to return to factory default settings. Picture noise/distorted Picture not in full screen Problem message display on screen The disc is dirty or damaged. Clean the disc or try another disc. Check the colour setting on the TV set. Try connecting the player directly to direct to the TV set, without using other devices, for example a VCR. Select the screen format from the SETUP MENU. Refer to SETUP MENU in this manual. Select the screen format from the DVD disc menu. The following message will display when there is a problem with the loaded disc: WRONG REGIONAL DISC : Disc s region code close does not match to the player. WRONG PASSWORD : The player refuses to play a disc with rating level higher than the player s rating level setting. WRONG DISC : The player is equipped with automatic disc quality detection software. When the player detects a problem disc or a damaged disc, the player may keep playing the disc at a lower quality or stop playing, depending on the damage level of the disc. 19

22 TROUBLESHOOTING Should your HOME THEATRE develop a problem, please check below for possible quick solutions: Symptom Check and Action Malfunction Press and hold the standby button (if any) for about 5 seconds to power off. Should the player develop a malfunction, unplug the player for 30 minutes. After 30 minutes, power on the player and the restore function should reset the player. Cannot SKIP or SEARCH No sound or sound output not complete MP3 disc no sound or noisy Remote control does not function Some discs are programmed so that they do not allow users to SKIP or SEARCH during some sections, especially at the beginning WARNING section. Single chapter discs cannot use the SKIP function. Check if the TV and amplifier have been switched on and correctly set. Check if the TV and amplifier system connection are secured. Press AUDIO to select other audio track outputs of disc. Press 5.1 CH/STEREO to select correct audio output mode for the DVD to match the audio equipment used to play the corresponding disc type. Check if the MUTE function of the TV or amplifier has been activated. There will be no sound output during REVERSE PLAY/PAUSE/STEP/SLOW and SEARCH. When PC program files or other files are mixed with MP3 files in the same disc, the player may play the non-mp3 files with noise or no sound. Check the disc, if all the files on the disc are MP3 files, then skip the file and try other files. Remove all obstacles between the remote control and the player Point the remote control towards the remote sensor on the player Check if the batteries of the remote control have been loaded with correct polarities. Replace the batteries of the remote control. USB no sound Check files in USB is correct format. Change to a USB with correct format file. FM no sound or weak Extend antenna wire in rear of unit. Press play/pause button to search channels again. Microphone no sound Press setup and select to MIC SETUP menu, then set MIC SETUP TO AUTO. Replace microphone. 20

23 SPECIFICATION Disc Formats DVD,VCD,SVCD,CD,CD-R,CD-RW File Formats MPEG 4, MP3, DivX,WMA,JPEG, AVI Signal Output Colour System: PAL / NTSC Video Output: 1Vpp (at 75 ohm) Audio Output(Stereo): 2 VRMS Frequency Response CD: 20 Hz 20 khz (EIAT) DVD: 20 Hz 22 khz (48K) 20 Hz 44 khz (96K) S/N Ratio 90dB THD 0.05% Output Terminals 1 x Video (composite) output 1 x Down mix stereo output (left and right) 5.1 CH Power Input AC V, 50/60Hz 21

24