XDV-P9 ENGLISH. Owner s Manual. 6-Disc Multi-DVD Player. [For U.S. and Canadian models] This product conforms to CEMA cord colors. [Other area models]

Transcription

1 6-Disc Multi-DVD Player ENGLISH Owner s Manual XDV-P9 [For U.S. and Canadian models] This product conforms to CEMA cord colors. [Other area models] This product conforms to new cord colors.

2 Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment. Now it s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection. Decibel Level Example 30 Quiet library, soft whispers 40 Living room, refrigerator, bedroom away from traffic 50 Light traffic, normal conversation, quiet office 60 Air conditioner at 0 feet, sewing machine 70 Vacuum cleaner, hair dryer, noisy restaurant 80 Average city traffic, garbage disposals, alarm clock at two feet. THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE 90 Subway, motorcycle, truck traffic, lawn mower 00 Garbage truck, chain saw, pneumatic drill 0 Rock band concert in front of speakers, thunderclap 40 Gunshot blast, jet plane 80 Rocket launching pad Information courtesy of the Deafness Research Foundation. i

3 For U.S. and Canadian Models About This Product Video System of a Connected Component This product is compatible with the NTSC system. When connecting other components to this product, be sure components are compatible with the same video systems. If it is not, images will not be correctly reproduced. Precaution: This product is incompatible with the PAL system. Refer to Video System of a Connected Component on page 3 for explanation of other area models video system. Important The serial number of this device is located on the bottom of this product. For your own security and convenience, be sure to record this number on the enclosed warranty card. Precaution CAUTION: CAUTION: USE OF CONTROL OR ADJUSTMENT OR PER- FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. After-sales Service for Pioneer Products Please contact the dealer or distributor from where you purchased the product for its after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your product to the companies at the addresses listed below for repair without advance contact. 7 U.S.A. Pioneer Electronics Service, Inc. CUSTOMER SERVICE DEPARTMENT P.O. Box 760 Long Beach, CA CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SERVICE DEPARTMENT 300 Allstate Parkway Markham, Ontario L3R 0P (905) For warranty information please see the Limited Warranty sheet included with your product. ii

4 Contents Be sure to read this. Discs Compatible with this Product... 9 Disc Operation... 0 Dear Customer... i For U.S. and Canadian Models... ii - About This Product - Important - Precaution Before Using... 3 Before Using This Product About This Product - About This Manual - How to Use This Manual - To Ensure Safe Driving - Precaution - In Case of Trouble - Preventing the Battery from Becoming Exhausted - Changing the Mode Switch Setting - Condition Memory - Resetting the Microprocessor Key Finder... 7 Using the Remote Controller Batteries Discs Compatible with this Product Features of This Player - What the Marks on DVDs Indicate - Disc Organization Main Features of This Product... Care of Discs and Magazines Precaution Loading Discs Loading Discs - Loading the Magazine - Removing the Magazine Basic Operations... 7 Switching Power ON/OFF Switching Power ON - Switching Power OFF Disc (DVD/Video CD/CD) Playback Working with the Menu Screen Chapter and Track Advance/Return Skipping to the Next Chapter/Track - Returning to the Previous Chapter/Track Specifying Title/Chapter/Track (Direct Search)... - Specifying Title - Specifying Chapter - Specifying Track Disc Fast Forward/Reverse... - Fast Forward - Fast Reverse Changing Discs... 3 Stopping Playback... 3 Playback Variations... 4 Still, Frame-by-Frame and Slow Motion Playback Still Playback - Frame-by-Frame Playback - Slow Motion Playback Changing Audio Language during Playback (Multi-Audio)... 6 Changing Audio Output during Playback... 6 Changing the Subtitle Language during Playback (Multi-Subtitle)... 7 Changing the Viewing Angle during Playback (Multi-Angle)... 8 Operating with Information Displays... 9 Calling up Information Displays... 9 Operating with the Information Display of a DVD Searching for a Desired Scene, Starting Playback from a Specified Time - Selecting Audio, Subtitle and Angle Operating with the Information Display of a DVD Switching Discs - Selecting Repeat Range - Selecting the Picture Mode

5 Operating with the Information Display of a Video CD Searching for a Desired Scene, Starting Playback from a Specified Time - Selecting Repeat Range - Selecting Audio Output Operating with the Information Display of a Video CD Switching Discs - Selecting the Picture Mode Operating with the Information Display of a CD Searching for a Desired Track - Selecting Repeat Range - Setting Random Play - Setting Scan Play Operating with the Information Display of a CD Switching Discs Changing Initial Settings Calling up the SET UP MENU Setting the Subtitle (SUBTITLE LANG.) Setting Subtitles and Assist Subtitles ON/OFF - Setting the Subtitle Language Setting the Audio Language (AUDIO LANG.) Setting the Menu Language (MENU LANG.) Setting the Parental Lock (PARENTAL) Setting the Code Number and Level - Changing the Level Setting Aspect Ratio (TV ASPECT) Setting for Digital Output (DIGITAL OUTPUT) Setting Digital and Analog Audio Output (OUT SELECTION) Setting Angle Selection Mark Display (ANGLE) Others... 5 The Remote Control Operation Mode Switch Using it as a Multi-Channel AV Master Unit Remote Control - Using it as a Navigation System Remote Control Operating with the Head Unit Switching Power ON ITS Playback Troubleshooting If You Forget Your Code Number Error Message Language Code Chart Terms... 6 Installation Connecting the Units Connecting the Power Cord - Connection Diagram Transportation of Multi-DVD Player... 7 Installation MODE Switch Setting - Installing the DVD Player Unit Installing the Remote Control Unit Fitting the Remote Control Unit - Installation Using the Mounting Base Installing the Remote Sensor Appendix Index Specifications... 78

6 Before Using Before Using Before Using This Product About This Product [For European models] This product complies with the EMC Directives (89/336/EEC, 9/3/EEC) and CE Marking Directive (93/68/EEC). Video System of a Connected Component [For models except U.S. and Canadian models] This product is NTSC/PAL system compatible. When connecting other components to this product, be sure components are compatible with the same video systems. If it is not, images will not be correctly reproduced. About This Manual This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This owner s manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the Precaution. How to Use This Manual This manual is divided into the sections shown below. Before Using: Explanations of operations you should perform before using this product. Basic Operations: Explanations of basic audio, video and other operations. Playback Variations: Explanations of how to enjoy various playback modes. Operating with Information Displays: Changing Initial Settings: Explanations of how to operate this product using Information Displays. Explanations of how to use this product s SET UP MENU. There is an index at the edge of each page in this manual. Each section s heading is printed vertically at the top of the left hand page. Each section s heading is also printed vertically at the edge of the right hand page, together with indications of the discs the explanations apply to. Please use these handy headings and indications when searching for information. 3

7 To Ensure Safe Driving WARNING To avoid the risk of accident and the potential violation of applicable laws, this product is not for use with a video screen that is visible to the driver. In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. This product detects whether your car s parking brake is engaged or not, and prevents you from watching a DVD or Video CD on the display connected to Front Video Output while driving. Example: When you attempt to watch a DVD (the screen is black.) Before Using When you park your car in a safe place and apply the parking brake, the picture appears on the screen. When Using a Display connected to Rear Video Output This product s Rear video output is for connection of a display to enable passengers in the Rear seats to watch the DVD or Video CD. WARNING NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while Driving. 4

8 Before Using Precaution A CLASS LASER PRODUCT label is affixed to the bottom of the player. [For European models] CLASS LASER PRODUCT Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough for outside sounds to be audible. Protect the product from moisture. If the battery is disconnected, the preset memory will be erased and must be reprogrammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. Preventing the Battery from Becoming Exhausted When using this product, be sure your car engine is running. If you use this product when your engine is not running, the battery will become exhausted. Changing the Mode Switch Setting Use a pen tip or other pointed instrument to select the correct setting of the Mode switch on the rear of this unit for the component you are using it with. After changing the setting, be sure to press the RESET button. (See page 6.) () When using this product with a Pioneer component featuring an IP-BUS input Select the IP-BUS mode. () When using this product with a Pioneer component that does not feature an IP-BUS input, or another company s product Select the STAND ALONE mode. IP-BUS STAND ALONE 5

9 Condition Memory This function memorizes audio language, subtitle language and picture mode settings made during disc playback for up to 30 discs. Without any special operations, the final setting details during playback of a disc are memorized. The next time a disc is played, the previous settings are automatically applied. With some discs, audio language and subtitle language are automatically specified, in which case condition memory does not function. When the number of discs exceeds 30, settings for the latest disc replace those for the least recent disc. Resetting the Microprocessor Pressing the RESET button lets you reset the microprocessor to its initial settings without changing SET UP MENU settings, Condition Memory and other memory settings. Press the RESET button in the following cases. After changing the setting of the Mode switch on the rear of the unit. When this unit fails to operate correctly. When strange (incorrect) messages appear on the display. Before Using Resetting Turn the ignition switch OFF. Press the RESET button. Use a pen tip or other pointed instrument. After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing the RESET button. 6

10 Before Using Key Finder The remote control and remote sensor are sold separately, although they may be provided with this product in certain areas. q Joystick/ENTER button w Small joystick/stop (7) button e SOURCE button (For AV Master Unit) r TOP MENU button t VOLUME (For AV Master Unit) y MENU button u DISPLAY button i ANGLE button o FORWARD ( ) button!0 STEP (e)/(e) buttons! PLAY/PAUSE (6) button! REVERSE () button!3 SUBTITLE button!4 AUDIO button!5 RETURN button!6 Remote control operation mode switch!7 POWER button!8 Number buttons!9 CLEAR button 7

11 Using the Remote Controller This product is equipped with a remote controller for convenient operation. Point the controller in the direction of the signal reception on the color display (sold separately) to operate. When the controller is not in use, attach it firmly to the provided mounting base. Precaution: Do not store the remote controller in high temperatures or direct sunlight. The controller may not function properly in direct sunlight. Do not let the remote controller fall onto the floor, where it may become jammed under the brake or accelerator pedal. Batteries Remove the cover on the back of the remote controller and insert the batteries with the (+) and ( ) poles pointing in the proper direction. Before Using Precaution: Use only UM-4, AAA or IEC LR03.5 V batteries. Remove the batteries if the remote controller is not to be used for a month or longer. Do not attempt to recharge the batteries supplied with remote control. Do not mix new and used batteries. In the event of battery leakage, wipe the remote controller completely clean and install new batteries. We recommended using alkaline batteries as replacements. When disposing of used batteries, please comply with governmental regulations or environmental public institution s rules that apply in your country/area. 8

12 Before Using Discs Compatible with this Product Features of This Player Compatible with DVD, Video CD and CD Formats DVD, Video CD and CD discs that display the logos shown below can be played back on this player. For more information on discs compatible with this player, refer to the table below. Disc types and logos Diameter/Playable sides Playback time DVD VIDEO VIDEO CD DVD VIDEO Digital audio/digital video (MPEG ) cm (5 in.)/single-sided layer 33 min. layer 4 min. cm (5 in.)/double-sided layer 66 min. layer 484 min. DVD VIDEO Digital audio/digital video (MPEG ) 8 cm (3 in.)/single-sided layer 4 min. layer 75 min. 8 cm (3 in.)/double-sided layer 8 min. layer 50 min. VIDEO CD Digital audio/digital video (MPEG ) cm (5 in.)/single-sided Max. 74 minutes VIDEO CD single Digital audio/digital video (MPEG ) 8 cm (3 in.)/single-sided Max. 0 minutes CD CD Digital audio cm (5 in.)/single-sided Max. 74 minutes CD single Digital audio 8 cm (3 in.)/single-sided Max. 0 minutes The disc format logos shown above are found on disc labels or on disc jackets. With some DVD-Video discs, you may not be able to use certain functions. Playback of some DVD-Video discs may not be possible. Playback of CD-TEXT discs is possible, but display of titles and other information is not possible. CD-Extra discs can be played back as music CDs. With Super Audio CDs, playback of a hybrid disc s CD layer only is possible. 9

13 Precaution: Playback of DVD-Audio, DVD-R and CD-ROM discs is not possible. This player can only playback discs bearing the marks shown on page 9. Use the optional 8 cm (3 in.) disc tray to play 8 cm (3 in.) discs. Never use a commercially available 8 cm adapter as this will damage the player. DVDs that have incompatible region numbers (see page 6) cannot be played on this player. The region number of the player can be found on the rear panel. The illustration below shows the regions and corresponding region numbers. Normal playback of CD-R discs other than those recorded with a music CD recorder may not be possible. Playback of music CD-R discs, even those recorded with a music CD recorder, may not be possible with this product due to disc characteristics or scratches or dirt on the disc. Dirt or condensation on the lens inside this product may also prevent playback. Titles and other text information recorded on a CD-R disc may not be displayed by this product. Read the precautions with the CD-R discs before using. Before Using What the Marks on DVDs Indicate The marks below can be found on DVD disc labels and packages. They indicate the type of images and audio recorded on the disc, and the functions you can use. Mark 3 6 : 9 LB ALL Meaning Indicates the number of audio systems. Indicates the number of subtitle languages. Indicates the number of viewing angles. Indicates the picture size (aspect ratio: screen width-to-height ratio) type. Indicates the number of the region where playback is possible. 7 Disc Operation With some DVDs, depending on the intentions of the disc s producer, certain operations may be prohibited. Also, with discs enabling menu operation and two-way operation during playback, the way titles and chapters are organized may prevent certain operations such as Repeat play. If this happens with this player, the prohibited mark is displayed. The prohibited mark may not appear on some discs. 0

14 Before Using Disc Organization DVD On DVD-Video discs, the contents are divided into titles which are in turn divided into chapters. With video material, a single work (movie etc.) usually corresponds to a single title, with different scenes corresponding to separate chapters. With karaoke discs, one song corresponds to one title. However, some discs are not organized like this, so bear this in mind when using the Search function. Title Title Chapter Chapter Chapter Chapter DVD Video CD and CD On CDs and Video CDs, the contents are divided into tracks. One track usually corresponds to one song. On some discs, tracks may also feature an index. With Video CDs featuring PBC (Playback Control), you can use a menu to perform playback operations. It may not be possible to use functions such as Repeat and Search. Track Track Track 3 Track 4 Track 5 CD Track Track Track 3 Track 4 Video CD

15 Main Features of This Product You can play back DVDs, Video CDs (PBC compatibility) and CDs. Repeat Play Still Image & Frame-By-Frame Playback Slow Motion Playback Multi-Aspect Cinema/Animation/Standard Mode Switching Multi-Audio Multi-Subtitle Multi-Angle Video CDs featuring PBC Compatibility Parental Lock Dolby Digital*/DTS** Compatibility (When combining the product with a Pioneer Multi-Channel AV Master Unit such as the AVM-P9000R or AVM-P9000) You can enjoy different kinds of repeat play. You can view still images or playback of one frame at a time. Slow motion playback is possible. Switching between Wide screen, Letter box and Panscan display is possible. You can switch among these three modes for the best picture quality when watching a movie or an animation movie. You can switch between multiple audio systems recorded on a DVD as desired. You can switch between multiple subtitle languages recorded on a DVD as desired. You can switch between multiple viewing angles of a scene recorded on a DVD as desired. You can play back Video CDs featuring PBC (Playback Control). You can use this to prevent your children viewing violent or adult oriented scenes. When using this product with a Pioneer Multi-Channel AV Master Unit, you can enjoy the atmosphere and excitement provided by DVD movie and music software featuring 5. channel recordings. * Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Confidential unpublished works Dolby Laboratories. All rights reserved. ** DTS is a trademark of Digital Theater Systems, Inc. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Before Using

16 Before Using Care of Discs and Magazines Precaution This product is designed for use with conventional, fully circular discs only. Use of shaped discs are not recommended for this product. Check all discs before playing and discard cracked, scratched or warped discs. Wipe dirty or damp discs outward from the center with a soft cloth. Avoid touching the recorded (iridescent) surface when handling discs. Store discs in their cases when not in use. Keep discs out of direct sunlight and high temperatures. Do not affix labels or apply chemicals to discs. Condensation may collect inside the player when using the heater in cold weather, interfering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth. Road shocks may interrupt disc playback. Be sure to use DVD compatible magazines and trays with this product. If you need more magazines, please ask your nearest dealer for magazine JD-6V. Do not put the magazine in a place where it will be exposed to high temperatures or direct sunlight. Do not disassemble the magazine. Take care not to drop the magazine or knock it against anything. Do not use cracked or warped trays. Never insert anything other than discs. Do not attach a label or tape to a disc. The use of benzine, thinner, insecticide, or other volatile chemicals may damage the magazine surface. Attach the supplied label in the specified position. Attaching the label in an incorrect place or attaching more than one label will cause malfunction. Label 3

17 Loading Discs Loading discs in the magazine and loading the magazine in the unit. Loading Discs You can load up to six discs in the magazine. Refer to page 9 to confirm the type of disc you can use with this unit. LOCK button While pressing the LOCK button, pull out the tray. Load a disc. Load with the recorded side (the iridescent side) facing down. With double-sided discs, load with the side you want to watch facing down. 3 Replace the tray. When Using 8 cm (3-inch) Discs Do not use an 8 cm disc adapter. If it is used, the player may fail. To load an 8 cm disc, you need a special 8 cm disc tray (Part No. CXB593). Ask your Pioneer Service Center about it. Before Using 8 cm disc Black and white levers cm disc tray 8 cm disc tray While pressing the LOCK button, pull out the tray. Gently pull out the tray to the left to remove it. Align the tray with the grooves on the left and right, and push in until you hear a click. Secure the disc with the black and white levers Replace the tray. Be sure to remove the disc before changing a disc tray. If the tray is not aligned with the right and left grooves, it cannot be pushed to the end. Do not bend or force the tray. Always load 6 trays in a magazine to prevent loss or warping of trays. 4

18 Before Using Loading the Magazine Load in the direction indicated by the arrow. 3 Slide the OPEN lever to the right. The front door opens. Load the magazine in the direction indicated by the arrow. Close the front door. 5

19 Removing the Magazine EJECT button 3 4 Slide the OPEN lever to the right. The front door opens. Press the EJECT button. Remove the magazine. Close the front door. Before Using Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage to the player. If the label on the magazine is coming off or wrinkled up, it may damage the eject mechanism, and in some cases, the magazine may not be ejected. Therefore, remove a damaged label completely before use. Be sure the front door is closed except when loading or removing a magazine. Playback is not possible if the front door is left open. Dust or dirt entering the magazine may result in damage to the unit. 6

20 Basic Operations Basic Operations Switching Power ON/OFF Switching Power ON When Using the IP-BUS Mode Operate after confirming the Operation mode switch is set to DVD (or AVM). (See page 7.) Press the SOURCE button. Press repeatedly until DVD is selected, and the disc starts playing. With a head unit other than a Multi-Channel AV Master Unit (e.g. AVM-P9000R, AVM- P9000), operation with this remote control is not possible. For details, refer to the Function Compatibility Chart. (See page 53.) When Using the STAND ALONE Mode Operate after confirming the Operation mode switch is set to DVD. (See page 7.) Switch the display image source to this product. For details, refer to the connected unit s manual. Press the POWER button on the side of the remote control. Power to this product switches ON and a disc starts playing. The remote sensor indicator lights. When you have reloaded the magazine, playback starts from the first disc. If you were previously playing a DVD, playback of that disc resumes from where you left off. If power to this product is switched ON/OFF with the POWER button, playback does not resume from where you left off. Playback cannot resume from where you left off until information on all of the discs has been read. With some discs, a menu may be displayed. (See page 9.) 7

21 Switching Power OFF When Using the IP-BUS Mode Press the SOURCE button for second. Power to the Multi-Channel AV Master Unit switches OFF. VD V ideo CD C D When Using the STAND ALONE Mode Press the POWER button on the side of the remote control. Power to this product switches OFF. The remote sensor indicator goes out. When using a rear display in the IP-BUS Mode Even if the source selected with the head unit is not DVD, if you switch power to this product ON with the POWER button, you can watch the DVD picture from this product on the rear display. Regardless of whether the head unit is switched ON/OFF, you can switch power to this product ON/OFF. Basic Operations Precautions concerning the IP-BUS Mode When you have switched power to this product ON by pressing the POWER button, be sure not to forget to switch power to this product OFF. If you switch power to this product OFF after switching to DVD video display, the display shows that power to this product has been switched OFF. When you eject a source disc (CD or MD) selected with the head unit, power to the head unit switches OFF. Depending on the connection method, the picture on the rear display may disappear. 8

22 Basic Operations Disc (DVD/Video CD/CD) Playback Press the PLAY/PAUSE (6) button. The playback mark ( ) is displayed for 4 seconds and the disc starts playing. Pressing the PLAY/PAUSE (6) button when a disc is playing, pauses playback. If the last disc played was a DVD, playback starts from the point on that disc where you stopped play previously. With some discs, a menu may be displayed and playback may not be possible from where you left off previously. (See the next item.) Working with the Menu Screen When DVDs offering menu or Video CDs featuring the PBC (Playback Control) function start playing, a menu is displayed. With DVDs Use the joystick to select the desired MENU option. Press the ENTER button. Playback starts from the selected menu option. 7 To Display the Menu You can display the menu by pressing the MENU button or TOP MENU button while a disc is playing. Pressing either of these buttons again lets you start playback from the location selected from the menu. For details, refer to the instructions provided with the disc. The way to display the menu differs depending on the disc. 9

23 With Video CDs Press the number buttons to select a desired menu option. Playback starts from the selected menu option. Operation with the joystick is not possible. VD V ideo CD 7 To Display the Menu You can display the menu by pressing the RETURN button while PBC playback. For details, refer to the instructions provided with the disc. When menu are two or more pages long, move the small joystick left/right (PREV 4/NEXT ) to switch between displays. To play a disc without using a menu (without PBC playback), when the disc is stopped press the appropriate number button to select the desired track. To return to PBC playback, stop playback and press the PLAY/PAUSE (6) button. Chapter and Track Advance/Return Skipping to the Next Chapter/Track C D Basic Operations During play, move the small joystick to the right (NEXT ). Chapter/track numbers are displayed for 4 seconds and you advance to the next chapter/track. Returning to the Previous Chapter/Track During play, move the small joystick to the left (PREV 4). Chapter/track numbers are displayed for 4 seconds and you return to the beginning of the current chapter/track. Moving the small joystick to the left (PREV 4) twice in succession takes you to the beginning of the chapter/track before the current chapter/track. 0

24 Basic Operations Specifying Title/Chapter/Track (Direct Search) Specifying Title Press the number button corresponding to a desired title number when the disc is stopped. Title number is displayed for 4 seconds and playback starts from the selected title. To select 3, press button 3. To select 0, press buttons +0 and 0 in order. To select 3, press buttons +0, +0 and 3 in order. Specifying Chapter Press the number button corresponding to a desired chapter number during playback. Chapter number is displayed for 4 seconds and playback starts from the selected chapter. To select 3, press button 3. To select 0, press buttons +0 and 0 in order. To select 3, press buttons +0, +0 and 3 in order. Specifying Track Press the number button corresponding to a desired track number. Track number is displayed for 4 seconds and playback starts from the selected track. To select 3, press button 3. To select 0, press buttons +0 and 0 in order. To select 3, press buttons +0, +0 and 3 in order. With some discs, the prohibited mark may be displayed and operation may not be possible. With Video CD, Direct Search is not possible during PBC playback.

25 Disc Fast Forward/Reverse VD Fast Forward During play, continue pressing the FOR- WARD ( ) button. The fast forward mark ( ) is displayed while pressing the button and disc fast forward is performed. V ideo CD C D Release the FORWARD ( ) button at the point you want to watch/listen. Playback resumes from that point. If you continue pressing the FORWARD ( ) button for 5 seconds, the color of the fast forward mark ( ) changes from blue to yellow. When this happens, fast forward continues even if you release the FORWARD ( ) button. To resume playback at a desired point, press the PLAY/PAUSE (6) button. If you fast forward to the end of a CD, fast forward continues from the beginning of the disc. Fast forward may not be possible at certain locations on some discs. If this happens, normal playback automatically resumes. Basic Operations Fast Reverse During play, continue pressing the REVERSE () button. The fast reverse mark ( ) is displayed while pressing the button and disc fast reverse is performed. Release the REVERSE () button at the point you want to watch/listen. Playback resumes from that point. If you continue pressing the REVERSE () button for 5 seconds, the color of the fast reverse mark ( ) changes from blue to yellow. When this happens, fast reverse continues even if you release the REVERSE () button. To resume playback at a desired point, press the PLAY/PAUSE (6) button. If you fast reverse to the beginning of a CD, normal playback resumes. Fast reverse may not be possible at certain locations on some discs. If this happens, normal playback automatically resumes. Continued overleaf

26 Basic Operations Changing Discs Move the small joystick up/down (DISC +/ DISC ). Disc numbers are displayed for 4 seconds and the previous or next disc in the magazine is selected. Repeat the operation to select the desired disc. Empty disc trays are skipped during disc selection. After a desired disc is selected, it automatically starts playing. Stopping Playback Press the STOP (7) button. When you stop DVD or Video CD playback (during PBC playback only) by pressing the STOP (7) button, that location on the disc is memorized enabling playback from that point when you play the disc again. The playback stop point on a disc is erased from memory if you change the disc, remove the magazine or switch power to this product ON/OFF with the POWER button. 3

27 Playback Variations Still, Frame-by-Frame and Slow Motion Playback Still Playback This lets you pause playback and view a still picture. Press the PLAY/PAUSE (6) button during playback. The still mark ( ) is displayed for 4 seconds and playback is paused letting you view a still image. VD V ideo CD C D To return to normal playback, press the PLAY/PAUSE (6) button once more. Frame-by-Frame Playback This lets you move ahead or back one frame at a time during playback. Reverse Frame-by- Frame playback is not possible with Video CDs. Press the STEP (E) or STEP (e) button. Each time you press the STEP (E) button, you move ahead one frame. Each time you press the STEP (e) button, you move back a number of frames. To return to normal playback, press the PLAY/PAUSE (6) button. Playback Variations 4

28 Playback Variations Slow Motion Playback This lets you slow down playback speed. Reverse Slow Motion playback is not possible with Video CDs. Press the STEP (e) or STEP (E) button for second during playback. The slow playback mark ( ) or ( ) is displayed, forward or reverse Slow Motion playback begins. To return to normal playback, press the PLAY/PAUSE (6) button. During forward Slow Motion playback, you can adjust playback speed by pressing the STEP (E) or STEP (e) button. Each time you press it the speed changes in 4 steps in the following order: /6 Ô /8 Ô /4 Ô / There is no sound during Still, Frame-by-Frame or Slow Motion playback. Depending on the disc and the playback location on the disc, the prohibited mark may be displayed indicating that Still, Frame-by-Frame and Slow Motion playback are not possible. With some discs, images may be unclear during Frame-by-Frame and Slow Motion playback. 5

29 Changing Audio Language during Playback (Multi-Audio) DVDs can provide audio playback with different languages and different systems (Dolby Digital, DTS etc.). With DVDs featuring multi-audio recordings, you can switch between languages/audio systems during playback. Press the AUDIO button during playback. The audio selection mark ( ) is displayed. VD V ideo CD Press the AUDIO button while the audio selection mark is displayed. The audio changes each time you press the AUDIO button. This function only operates with DVDs featuring multi-audio recordings. The number in the mark on a DVD s package indicates the number of recorded languages/audio systems. With some DVDs, switching between languages/audio systems may only be possible using a menu display. You can also switch between languages/audio systems using the SET UP MENU. For details, refer to Setting the Audio Language on page 43. Only digital output of DTS audio is possible. If this product s optical digital outputs are not connected, DTS audio will not be output, so select an audio setting other than DTS. While the audio selection mark is displayed, you can also switch to a desired audio language number using the number buttons. Display indications such as and 5.ch indicate the audio system recorded on the DVD. Depending on the setting, playback may not be with the same audio system as that indicated. Playback Variations Changing Audio Output during Playback You can switch between stereo and monaural output. Press the AUDIO button during playback. The audio output selection mark ( ) is displayed. Press the AUDIO button while the audio output selection mark is displayed. The audio output setting changes each time you press the AUDIO button in the following order: L+R (Stereo) = L (Left) = R (Right) = L+R (Stereo) 6

30 Playback Variations Changing the Subtitle Language during Playback (Multi-Subtitle) With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during playback. Press the SUBTITLE button during playback. The subtitle selection mark ( ) is displayed. Press the SUBTITLE button while the subtitle selection mark is displayed. The subtitle language changes each time you press the SUBTITLE button. This function only operates with DVDs featuring multi-subtitle recordings. The number in the mark on a DVD s package indicates the number of recorded subtitle languages. With some DVDs, switching between subtitle languages may only be possible using a menu display. You can also switch between subtitle languages using the SET UP MENU. For details, refer to Setting the Subtitle on page 4. While the subtitle selection mark is displayed, you can also switch to a desired subtitle language number using the number buttons. At this time, you can also switch subtitle display OFF by pressing the CLEAR button. 7

31 Changing the Viewing Angle during Playback (Multi-Angle) With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can switch among viewing angles during playback. VD 7 About Scenes that Let You Change the Viewing Angle During playback of a scene shot from multiple angles on this product, the angle selection mark ( ) is displayed in the bottom right of the screen. Switch angle selection mark display ON/OFF using the SET UP MENU. For details, refer to Setting Angle Selection Mark Display on page 50. Press the ANGLE button during playback of a scene shot from multiple angles. The angle selection mark ( ) and angle number ( ) are displayed. Playback Variations Press the ANGLE button while the angle selection mark and angle number are displayed. The angle changes each time you press the ANGLE button. This function only operates with DVDs featuring multi-angle recordings. The 3 mark on a DVD s package indicates it features multi-angle scenes. The number in the 3 mark indicates the number of angles from which scenes were shot. You cannot switch angles during Slow Motion playback. If you press the ANGLE button during fast forward/fast reverse or pause, fast forward/fast reverse or pause is canceled and normal playback resumes but the viewing angle does not change. While the angle selection mark and angle number are displayed, you can also switch to a desired angle number using the number buttons. 8

32 Operating with Information Displays Operating with Information Displays Calling up Information Displays Information displays let you easily perform a wide range of disc operations. These include starting playback from a specified title, chapter or time, selecting the picture mode, setting the range of Repeat play, changing discs, and switching between different audio and subtitle settings. Press the DISPLAY button. Each time you press the button the display changes as follows: Information display = Information display = Display OFF = Information display Information display (e.g. DVD) Information display (e.g. DVD) For CDs there is no Display OFF setting. You can perform disc switching as well as title, chapter and time settings with either the information display or. This manual explains how to use the information display to display all the discs loaded in the magazine for disc switching, and how to use the information display to perform title, chapter and time settings. Pressing the DISPLAY button during fast forward/reverse returns you to normal playback. 7 Concerning Information Display When information cannot be read directly after loading a magazine or at some other time, indications of the type of disc that cannot be read are not displayed. 9

33 Operating with the Information Display of a DVD This display lets you switch discs for playback, use the Search function to specify a title or chapter to search for a desired scene, use the Time Search function to specify a time to search for a desired scene, select the desired audio and subtitle language, and select the angle. Displaying all the discs loaded in the magazine for disc selection is explained using the information display. Searching for a Desired Scene, Starting Playback from a Specified Time You can use the Search function to search for a desired scene by specifying a title or chapter, and the Time Search function to specify the time on a disc at which play starts. Move the joystick left/right to select a desired option. The selected option is indicated in blue. Press the number buttons to input the desired number. For Titles and Chapters To select 3, press button 3. To select 0, press buttons and 0 in order. To select 3, press buttons and 3 in order. To jump 0 titles or chapters ahead of the selected one, press the +0 button. For Time (Time Search) To select minutes 43 seconds, press buttons,, 4 and 3 in order. To select hour minutes, convert the time into 7 minutes 00 seconds and press buttons 7,, 0 and 0 in order. To jump 0 seconds ahead of the selected time, press the +0 button. Pressing the CLEAR button cancels the input number. You can also select titles and chapters by moving the joystick up/down. 3 Title Chapter Time While the input number is displayed, press the ENTER button. This starts playback from the selected scene. With discs featuring a menu, you can also press the MENU button or TOP MENU button and then make selections from the displayed menu. With some discs, the prohibited mark may be displayed, indicating that titles, chapters and time cannot be specified. Chapter Search and Time Search are not possible when disc playback has been stopped. VD V ideo CD C D Operating with Information Displays 7 Direct Search Even without using an information display you can start playback from a specified title or chapter. For details, see page. 30

34 Operating with Information Displays Selecting Audio, Subtitle and Angle You can perform Audio (language, stereo, audio type as Dolby Digital etc.), Subtitle language and Angle selection. Move the joystick left/right to select a desired option. The selected option is indicated in blue. Move the joystick up/down to switch to the desired setting. This switches you to the selected setting. For Audio Selection options switch as follows: Audio Ô Audio Ô Audio 3 Ô Audio For Subtitles Selection options switch as follows: Subtitles Ô Subtitles Ô Subtitles OFF Ô Subtitles Audio Subtitles Angle For Angle Selection options switch as follows: Angle Ô Angle Ô Angle 3 Ô Angle The number of switching options depends on how many options are recorded on the DVD. You can switch Audio, Subtitle and Angle during playback using the respective buttons. For details, refer to Playback Variations on page 4. You can also switch settings by inputting numbers with the number buttons. Display indications such as and 5.ch indicate the audio system recorded on the DVD. Depending on the setting, playback may not be with the same audio system as that indicated. 3

35 Operating with the Information Display of a DVD In addition to the Search and Time Search functions of the information display, this display lets you switch the disc for playback, select the range for Repeat play, and select the Picture mode. VD Switching Discs You can switch discs while confirming disc type. The selected disc is indicated by an arrow. Move the joystick left/right to select the Disc option. The Disc option is indicated in blue. Move the joystick up/down to select the desired disc. Disc 3 Press the ENTER button. The selected disc starts playing. You can also switch discs by pressing a number button. Selecting Repeat Range You can choose between Repeat play of a disc, title or chapter. Move the joystick left/right to select the Repeat range option. The Repeat range option is indicated in blue. The currently selected disc Move the joystick up/down to switch to the Repeat range desired setting. This switches you to the selected setting. Disc Ô Title Ô Chapter Ô Disc When you select Disc, playback of the entire disc is repeated. When you select Title or Chapter, playback of that title or chapter only is repeated. Operating with Information Displays When the Repeat play of a DVD disc is selected, play stops and depending on the disc a menu is displayed upon completion of play of an entire disc once through. 3

36 Operating with Information Displays Selecting the Picture Mode You can select between Standard, Animation and Cinema modes. Compared to Standard mode, Animation provides a picture with beautifully clear colors and the Cinema mode assures images with well defined black/white contrast. Move the joystick left/right to select the Picture mode option. The Picture mode option is indicated in blue. Move the joystick up/down to switch to the desired setting. This switches you to the selected setting. Standard Ô Animation Ô Cinema Ô Standard Images may not be clear with some software and some displays. Picture mode Operating with the Information Display of a Video CD This display lets you switch discs for playback, use the Search function to specify a track to search for desired scenes, use the Time Search function to specify a time to search for a desired scene, switch audio output, and select the range for Repeat play. During playback of Video CDs featuring PBC (Playback Control), Play Back Control:ON is displayed. During such playback, Search and Time Search functions cannot be used nor can you select the range for Repeat play. Displaying all the discs loaded in the magazine for disc selection is explained using the information display. Searching for a Desired Scene, Starting Playback from a Specified Time You can use the Search function to search for a desired scene by specifying a track, and the Time Search function to specify the time on a disc at which play starts. Move the joystick left/right to select a desired option. The selected option is indicated in blue. Track Time 33

37 Press the number buttons to input the desired number. For Tracks To select 3, press button 3. To select 0, press buttons and 0 in order. To select 3, press buttons and 3 in order. To jump 0 tracks ahead of the selected one, press the +0 button. VD V ideo CD For Time (Time Search) To select minutes 43 seconds, press buttons,, 4 and 3 in order. To select hour minutes, convert the time into 7 minutes 00 seconds and press buttons 7,, 0 and 0 in order. To jump 0 seconds ahead of the selected time, press the +0 button. Pressing the CLEAR button cancels the input number. You can also select tracks by moving the joystick up/down. 3 While the input number is displayed, press the ENTER button. This starts playback from the selected scene. Time Search is not possible while the disc is stopped. 7 Direct Search Even without using an information display you can start playback of a desired track. For details, see page. Operating with Information Displays 34

38 Operating with Information Displays Selecting Repeat Range You can choose between Repeat play of a disc or a track. Move the joystick left/right to select the Repeat range option. The Repeat range option is indicated in blue. Move the joystick up/down to switch to the Repeat range desired setting. This switches you to the selected setting. Disc Ô Track When you select Disc, playback of the entire disc is repeated. When you select Track, playback of that track only is repeated. Selecting Audio Output You can select between stereo and monaural audio output. Move the joystick left/right to select the Audio option. The Audio option is indicated in blue. Move the joystick up/down to switch to the Audio desired setting. This switches you to the selected setting. L+R (Stereo) Ô L (Left) Ô R (Right) Ô L+R (Stereo) When you select Stereo, audio is output through both left and right channels. When you select Left or Right, audio is output from that channel only. 35

39 Operating with the Information Display of a Video CD In addition to the Search and Time Search functions of the information display, this display lets you switch the disc for playback and select the Picture mode. During playback of Video CDs featuring PBC (Playback Control), Play Back Control:ON is displayed. During such playback, both Search and Time Search functions cannot be used. V ideo CD Switching Discs You can switch discs while confirming disc type. The selected disc is indicated by an arrow. Move the joystick left/right to select the Disc option. The Disc option is indicated in blue. Move the joystick up/down to switch to a desired disc. Disc 3 Press the ENTER button. The selected disc starts playing. You can also switch discs by pressing a number button. Selecting the Picture Mode You can select between Standard, Animation and Cinema modes. Compared to Standard mode, Animation provides a picture with beautifully clear colors and the Cinema mode assures images with well defined black/white contrast. Move the joystick left/right to select the Picture mode option. The Picture mode option is indicated in blue. Move the joystick up/down to switch to the desired setting. This switches you to the selected setting. Standard Ô Animation Ô Cinema Ô Standard The currently selected disc Picture mode Operating with Information Displays Images may not be clear with some software and some displays. 36