Motor Coach DVD User s Guide

Size: px

Start display at page:

Download "Motor Coach DVD User s Guide"

Evan Haynes
5 years ago
Views:

1 Motor Coach DVD User s Guide DVD/CD/USB 1080P HDMI-E Output 2018 Radio Engineering Industries, Inc.

2 AUDIO SYSTEMS Congratulations on your purchase of the REI DVD Player. This product has been designed and built to deliver the highest quality of video and audio reproduction. We are sure you'll enjoy watching your favorite movies with this player as a part of your entertainment system. For best results, please consult a professional mobile electronics installer for application advice or troubleshooting. To guarantee top performance, we recommend on using REI installation accessories such as RCA interconnects, power cables, and speaker wire. Thank you for choosing REI products for your mobile entertainment system. FEATURES Compatible with PAL-DVD/Video CD and NTSC DVD/Video CD. A single LSI chip now integrates all major DVD playback functions including MPEG decoder, video D/A converter, and audio decoder. Moisture Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Use the proper Power Supply This product is designed to operate within 10~30 volt DC. Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. Use Authorized Service Centers Do not attempt to disassemble or adjust this precision product, please refer to an REI Service Center for service or assistance. L/R stereo analog audio outputs for connection to existing head unit aux inputs. Video output is 1080p via HDMI-E and 480i composite video on locking BNC. Rear USB input for digital media Supplied remote handles multi-function software (multi - language audio - track /subtitle,multi-angle,multi-story,etc),plus all basic functions. Last position memory USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. 1

3 CONTENTS Safety Information...3 Disc Notes...4 Installation...5 Removal...5 Electrical Connections...5 Front and Back Panel Descriptions...6 Remote Control...7 Using the Remote Control...8 Loading a DVD/VCD/CD Disc...8 Ejecting a Disc...8 Basic Operations...8 On-Screen Display Function...9 Multi-audio Language Function...10 Menu Function...10 Title Menu Function (For DVD only)...10 Multi-subtitle Language Function For (DVD only)...10 Multi-angle Function (For DVD only)...10 Initial Setup...11 General Setup...11 Audio Setup Page...13 Preference Page...13 Additional Information...14 Accessories and Hardware...15 Restore Default...16 Technical Specifications

4 Safety information Caution: This Mobile DVD player is a class A laser product. The player uses a visible/ invisible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the mobile DVD player correctly as instructed. Use of controls, adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure. Do not open covers and-do not repair by yourself, refer servicing to qualified personal. Warning: to reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. to reduce the risk of fire of electric shock, and annoying interference, use only the recommended accessories. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Reverse engineering or disassembly is prohibited. Region Management Information: This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, the player will not play that disk. Disc formats supported by this player. CD: CD-DA, CD-R/RW, CD-ROM, MP3 VCD: VCD, SVCD DVD: DVD, DVD+/-R, DVD+R DL, DVD-RW, Discs which cannot be played with this player DVD-ROM DVD-RAM CDV CD-G Handling and cleaning Dirt, dust, scratches and warping disc will cause mis-operation. Do not place stickers or make scratches on discs. Do not warp discs. A disc should be kept in its case when not in use to prevent damage. Do not place discs in following place: 1. Direct sunlight 2. Dirty, dusty and damp areas 3. Near car heaters 4. On the seats or dashboard 3

5 Disc Cleaning Use a dry soft cloth to wipe the surface. If the disc is dirty, use a soft cloth and wipe clean with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc. Note: A disc may become somewhat scratched (although not enough to make it unplayable) depending on how it is handled and the conditions of exposure. Note that these scratches are not an indication of a problem with the Player. Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used and the proper preparation is not performed, the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the bottom. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc. Rough spots on outside edge Ball point pen or pencil Label side up Do not touch the underside of the disc Rough spots on inside edge Do not bend Wipe the disc from center Toward the outside edge 4

Bracket Mount Installation Option Dash Mount Installation Option SCREW M2.6X4 Step1: Remove the 2 side brackets Step1: Verify radio opening is cut to the above minimum dimensions.

6 Bracket Mount Installation Option Dash Mount Installation Option SCREW M2.6X4 Step1: Remove the 2 side brackets Step1: Verify radio opening is cut to the above minimum dimensions. Test fit the DIN collar to verity opening is adequate and does not compress the collar in any direction. SCREW M2.6X4 Screw M3x6 Screw M3x4 Screw M3x4 (2) Step2: Attach the L-form brackets to the player using the supplied screws (M3x4). (1) TRIM COLLAR (2) Electrical Connections Step2: Insert the DIN collar into the dash opening and bend the lock tabs outward securing it into place. (1) Slide the DVD player into the DIN collar until both side clips lock. (2)Attach Trim collar onto the front panel. Removal DIN COLLAR Enter /Add /CH+ /CH- Step1: (1) Slide both removal keys into the sides of the DVD player until they lock. Pull both keys to release the DVD player from the DIN collar. Figure: Electrical Connections 5

Front Panel: 15 POWER EJECT DVD PLAYER MENU SEL RESET RX 16 14 1. Press POWER to turn the unit ON or OFF 2. Eject button 3. Press to skip back one track/title/chapter Press and HOLD to REW x8 Speed 4.

7 Front Panel: 15 POWER EJECT DVD PLAYER MENU SEL RESET RX Press POWER to turn the unit ON or OFF 2. Eject button 3. Press to skip back one track/title/chapter Press and HOLD to REW x8 Speed 4. Press [ RESET ] button will perform a hardware reset on player. 5. Press to stop playback, press twice to restart the DVD at the beginning 6. Begin playback, press to STILL Pause 7. Press to skip to the next title/chapter/track Press and HOLD to Skip FF x8 Speed 8. Display the root menu that is stored on the DVD disc. Selects between PBC ON and PBC OFF on a VCD 9. In MENU mode, this button moves the cursor to the left Back Panel: 10. In MENU mode, this button moves the cursor to the right 11. Confirm the Track/Chapter selected with the number key or selected with the cursor buttons on the monitor, or return to playback 12. In MENU mode, this button moves the cursor down. 13. In MENU mode, this button moves the cursor up. 14.IR Sensor 15. Disc Slot 16. LCD Panel (Anti-glare) φ DC Jack IN: +12VDC/GND pin Power IN: +12VDC/+24VDC/GND/NC 21. Programming Header IN 22. Control Interface 23. External IR Input 24. A/V IN: 3 * RCA Yellow: Video/CVBS Red/White: Audio-R/Audio-L 25. A/V OUT: 2*RCA + BNC Yellow(BNC): Video/VBS Red/White(RCA): Audio-R/Audio-L 26. Mounting Stud 27. USB INPUT 28. HDMI-E Output 6

Remote Control: DISP PAUSE ZOOM 10.Changes the AUDIO soundtrack on multiaudio soundtrack DVD discs. Changes the sound output mode of the VCD/CD discs. 11.Switch the repeat mode of DVD/VCD/CD/ USB. 12.

Press to stop playback. 18.Press to skip to the next track or chapter. 19.Press to skip back one track or chapter. 20.Press to play forward rapidly. 21.Press to play reverse rapidly. 22.

8 Remote Control: DISP PAUSE ZOOM 10.Changes the AUDIO soundtrack on multiaudio soundtrack DVD discs. Changes the sound output mode of the VCD/CD discs. 11.Switch the repeat mode of DVD/VCD/CD/ USB. 12.Changes the SUBTITLE language on multisubtitle language DVD discs. 13.Display statistical disc information during playback. 14.Eject button 15.Displays the SETUP menu. 16.Press to pause playback. 17.Press to stop playback. 18.Press to skip to the next track or chapter. 19.Press to skip back one track or chapter. 20.Press to play forward rapidly. 21.Press to play reverse rapidly. 22.Mutes the audio. 23.Disc search button, used in conjunction with numeric buttons 24.Zoom in by 2X, 3X, 4X. 25.Select playing discs in one of PAL, NTSC, and Multi(recorded in disc) signal formats. 26.Changes the view angle on multi-angle DVD disc. 27.Not Used. 1.Changes the video and audio between aux input AV1, DVD, or USB. 2.Press POWER to turn the unit ON or OFF. 3.Displays the root menu that is stored on the DVD disc. Selects between PBC ON and PBC OFF on a VCD. 4.In MENU mode, these buttons move the cursor up or down. In MENU mode, these buttons move the cursor to the left or right. 5.Confirms the Track/Chapter selected with the number keys and with the cursor buttons and will begin playback. 6.Increase or decrease the audio volume. 7.Numeric buttons 8.Increments numbers by 10 9.Displays the TITLE menu that is stored in DVD disc. Preparing the Remote Control Inserting the Battery 1.Open the battery compartment cover. 2.Insert 2 new batteries ( 1.5V AAA ). Make sure that the positive and negative terminals of the battery are oriented Indicated. 3.Close the cover 7

9 Using the Remote Control Point the remote control toward the front of the player(or at the aux ir sensor) Operation angle: About ±30 degree in each direction of the front of the IR mark. To prevent damage to the unit, be sure to follow the connection diagram(page 5). Loading a DVD/VCD/CD Disc ( Figure: Electrical Connections2 ) 1.Turn the ignition to the Accessory (ACC) position. 2.Press the POWER button. 3.Insert the disc into the disc slot with the label side of the disc facing up. 4.The player will stars playback automatically. Ejecting a disc Press (EJECT) button to eject the disc. Basic Operations 1.Press the (Stop) button to stop playback. Press the (play) button for playback. 2.Press the (Stop) button twice to stop the playback and go back to the initial Track/ Chapter. Rapid Forward/Reverse Press FF & REW during play. Each time the button is pressed the speed changes (depending on the disc format) as follows: DVD/VCD/CD/MP3: Normal» 2X» 4X» 8X»16X»32X Skipping a Track Press / on the remote handset or on the front panel during playback. Press to skip to next track, and to back one track. Pause (still picture) Pressing PAUSE(ll)button during playback, will still pause playback temporarily. Press the PAUSE button a second time to resume playback. Repeat Press the REPEAT(REP) button to select a repeat mode as follows: DVD: Press the REPEAT(REP) button to select a repeat mode as follows. OFF» Chapter» Title» REP All SVCD/VCD/CD: Press the REPEAT(REP) button to select a repeat mode as follows. OFF» TRACK» ALL 1.Repeat Track mode will continuously repeat the current track/song. 2.in Repeat ALL mode, all tracks /songs on the disc are repeated. ZOOM If the ZOOM button is pressed, the image will be enlarged each time by 2X, 3X, 4X, 1/ 2, 1/3, 1/4. Please note that some DVD disc videos can not be zoomed. TITLE Pressing the TITLE button when DVD is in playback will bring up the TITLE menu. GOTO Press GOTO button to start the searching function. 1.CD/MP3/Movie Clips Press GOTO button, the status bar will appears and allow users to input text. Use the UP/DOWN arrows or Numeric Keys to select desired Track. 8

10 Press GOTO again to exit. 2. VCD/SVCD Press GOTO button, the display bar will appear and allow users to input text. Use the UP/DOWN arrows or Numeric Keys to play the desired Track. Press GOTO again to exit. 3. DVD Press GOTO button, the GOTO menu will appear for user to adjust parameters during disc playback such as title, chapter, repeat modes, angle, audio and subtitle. Mute Function Press MUTE button on the remote control to mute the audio. Press it again or VOL+/VOL- to restore the audio. VOL+ / VOL- Volume Control: Press VOL+ on the remote control to increase the audio level and press the VOLto decrease the audio level. 3. Select the input source by pressing the AUX button on the remote control. Select the AV1 input for external device. 4. The signals are also routed through the video output jack and the audio output jack of the DVD unit. In some cases, an In-Line RCA Audio Noise Filter/Ground Loop Isolator may be necessary. USB SOURCE 1. Select the USB input source by pressing the AUX button on the remote control. The USB icon will display, a slight delay is possible during the loading of the device. On-Screen Display Function Press the DISP button during playback to show the timing contents of the current disc on the upper side of the screen. (1) DVD: Title Elapsed TT 01/03 CH 02/31 00:01:36 Remote Sensor (IR) Can be used as an External sensor for adjusting DVD player with the remote. Turning the player on/off Press the POWER button on front panel or on the remote control to turn the player on or off. Audio/Video Mode Whenever you press the AUX button, the input source will change as follows: DVD» AV1» USB AUDIO/VIDEO IN The unit accepts an auxiliary (AUX) composite external source. 1. Connect the equipment and the unit with A/V cables. The AUDIO OUT of the external device connects to the AUDIO IN jacks of the player, the VIDEO OUT of the external device is connected to the VIDEO IN jack of the player. 2. Turn on the external device and the player. 9

Multi-audio Language Function (1) DVD: Press AUDIO button during playback. Each time the button is pressed, the audio soundtrack language is changed in a sequential order.

11 Multi-audio Language Function (1) DVD: Press AUDIO button during playback. Each time the button is pressed, the audio soundtrack language is changed in a sequential order. Notes: The number of languages varies according to the disc. Some disc may only contain one language soundtrack. When alternate language soundtracks are not available, the INVALID KEY symbol will be displayed on the upper left corner of the screen. (2) VCD: Press AUDIO during playback. It is possible to switch the sound between mono and stereo sound. STEREO» MONO (L)» MONO (R) AUTO (R) «AUTO (L) MENU Function (for DVD and USB only) Press MENU button while the disc/usb media is playing and the menu will be displayed. You can navigate with the remote control navigation keys and select a feature with the ENTER key. MP3/MPEG/MENU Playback Digital media will play in a FOLDER format as shown below. For example: AUDIO FILE REQUIREMENTS The MP3 files with a sampling frequency of 8-48 khz. And a bitrates between 8 to 320 kbps. Supports ID3 Tag Versions 1.0/1.1/2.2/2.3/2.4 The WMA file with a sampling frequency of khz. And a bitrates between 48 to 320 kbps. FLAC (.FLAC) FLAC files (frequencies to 96 khz, 16/24 bit) VIDEO FILE REQUIREMENTS (.MPG/.MP4/.AVI) MPEG-4 FILE REQUIREMENTS (.Mp4) Video Codec: H.264 (AVC) or MPEG-4 (Xvid/DivX) Audio Codec: AC3/MP3/MPEG Bitrate: Max. 8 Mbps Frame rate: Max. 30 fps Image size: Max x1080 pixels File extension:.mp4 DivX FILE REQUIREMENTS (.AVI) Files encoded with Xvid or divx Profiles, Max frame rate 30 fps (30p/60i) Video Codec: H.264/ MPEG-4 Advanced Simple Profile Audio Codec: MP3/AC3/PCM Image size: Max x1080 pixels MPEG-1/MPEG-2 (.MPG) Video Codec: MPEG1/2 MPG1/2 Audio Codec: MP2/3 1. Use 56 to move the cursor in the folder and file type list windows and 34 to move the cursor between folder file list windows and file type icons and pressing ENTER to select. 2. Pressing the REPEAT button can select different repeat playback modes. 3. During the playback, use 9 / : to skip an item forward or back. NOTE: This does not support playback of aac (.m4a) audio. Individual file size limit is 2G in accordance with Fat16/32 file restrictions. For Best results, memory speeds of 10MB/s are preferred. Note: Press MENU button to return to the Folder window when playing. 10

Multi-Subtitle Language Function (for DVD only) Press SUBTITLE during playback. Each time the button is pressed, the subtitle language is changed in a sequential order.

12 Multi-Subtitle Language Function (for DVD only) Press SUBTITLE during playback. Each time the button is pressed, the subtitle language is changed in a sequential order. Notes: The number of subtitle languages varies according to the disc. Some discs may contain no subtitles. Thus OFF is the only available selection. Multi-Angle Function (for DVD only) Press ANGLE during playback. Each time the button is pressed, the angle changes in sequential order. Note: The number of angles is different according to the disc. The function only works for discs having scenes recorded at different angles. When alternate angles are not available, the INVALID KEY message will be displayed on the top left corner of the screen. Title Menu Function (for DVD only) If the DVD has multiple titles recorded on the disc, it can select preferred titles from the title menu to start playback. 1. Press TITLE button during playback. The title menu is displayed. 2. Navigate with the cursor shown on the monitor to select the preferred title and confirm by pressing the ENTER key. INITIAL SETUP SETUP MENU --- MAIN PAGE A. General Setup Page This setup page includes all the items for system and external TV display features, Angle Mark, OSD Language, Close Captions, Screen Saver, and Last Memory. Please refer to the GENERAL SYSTEM SETUP section for details. C. Preference Page This setup page includes the adjustments for TV Type, PBC, Audio, Subtitle, Disc Menu, Parental, & Default. Please refer to the Preference Page section for details. 4. Press ENTER button to start navigating the selected page, or 3button to go back. 5. Use 5 / 6 buttons to highlight the yellow cursor to the item you want to adjust. GENERAL SETUP PAGE TV DISPLAY This is to select the appropriate aspect (4:3 or 16:9) according to the connected monitor. (1) Normal/PS (For 4:3 TV) Playback in the PAN & SCAN style. (If wide screen monitor is connected, the left and right edges are cut off.) (2) Normal/LB (For 4:3 TV) Playback in the letterbox style. (If wide screen is connected, black bands appear at bottom and top of the screen.) 1. Press SETUP on remote. 2. The initial SETUP menu is displayed. 3. Select the submenu by using the 3/4 buttons to navigate and highlight an icon. There are Two setup pages available. (3) Wide (For 16:9 TV) Select when connected to a wide-screen monitor. 11

(4) Spanish (5) Portuguese Last Memory This is to enable (On) or disable (Off) the ability to memorize the last playing position of the disc when the system is powered off.

13 OSD LANGUAGE This item sets the appropriate language for the On-Screen Display (OSD) messages. Press ENTER and then 5 / 6 buttons to move cursor over the available selections, Press ENTER again to select one of 5 languages available: (1) English (2) Chinese (3) French (4) Spanish (5) Portuguese Last Memory This is to enable (On) or disable (Off) the ability to memorize the last playing position of the disc when the system is powered off. As long as this function is enabled, the system will automatically play a disc from the last position when the player is powered off. Captions This is to enable (On) or disable (Off) the ability for system to display the Subtitle languages on the screen. 12

PREFERENCE PAGE Type This player can play discs whose contents are

Select either format when you re connected to a corresponding NTSC

Subtitle Select the preferred SUBTITLE language by using the cursor

PBC Select either ON or OFF to enable menu s when playing back VCD s

Disc Menu Select the preferred DISC MENU language by using the

14 PREFERENCE PAGE Type This player can play discs whose contents are recorded in either PAL or NTSC formats. Select either format when you re connected to a corresponding NTSC or PAL monitor. Subtitle Select the preferred SUBTITLE language by using the cursor buttons and confirm by pressing ENTER. PBC Select either ON or OFF to enable menu s when playing back VCD s or SVCD s. Disc Menu Select the preferred DISC MENU language by using the cursor buttons and confirm by pressing ENTER. AUDIO This item sets the default AUDIO soundtrack for DVD discs. Select the preferred AUDIO soundtrack by using5 / 6 button to move cursor over the available selections, and confirm by pressing ENTER. 13

15 Additional Information Notes To avoid shorts in the electrical system, be sure to disconnect the power cable before beginning installation. Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into that lead. The current capacity of the lead will be exceeded, causing overheating. With DVD-R/DVD-RW discs, only recordings made in the video format ( Video mode ) can be played back. DVD-RW discs recorded in the Video Recording format (VR mode) cannot be played back. Even with DVD-R/DVD-RW discs featuring recordings made in the Video format ( Video mode), playback may not be possible with this unit due to disc characteristics or scratches or dirt on the disc. Dirt or condensation on the lens inside this unit may also prevent playback. Playback of discs recorded with a PC using the correct format is possible but depending on the application software, environmental settings and other factors playback may not be possible ( For details, inquire at the store or dealer where you purchased the application software.) CD - Extra discs can be played back as music CDs. CD-R/CD-RW discs are considered normal playback discs if they were recorded with an music CD Recorder. Playback of music CD-R/CD-RW discs even those recorded with a music CD recorder, may not be possible with this unit due to disc characteristics or dirt on the disc. Dirt or condensation on the lens inside this unit may also prevent playback. Titles and other text information recorded on a CD-R/CD-RW discs can not be displayed by this unit. If you insert a CD-RW disc into this unit to playback, it will take a bit longer time than when you do with a conventional CD or CD-R disc. Read the precautions with the CD-R/CD-RW discs before using. 14

16 /Add Accessories and Hardware User Manual Enter /CH+ /CH- No. Item Diagram Quantity 1 User Manual 1 2 Remote Control 1 3 A/V Connections 1 4 Power Supply Connections 1 5 L/R- Brackets 2 6 Screws ( M3x4) (M3x6) External Remote Sensor 1 8 DIN Collar 1 9 Trim Collar 1 10 Release Key 2 11 Side BKT 2 12 Screws (M2.6x4) 2 13 Washer & Nut 1 Note: The use of any accessories except for those provided might result in damage to the unit. Make sure to only use the accessories shipped with the unit, as shown above. 15

17 Restore Default Navigate to the Preference Page in the DVD player s SETUP menu, and then select item Default by pressing ENTER button. Press the ENTER button again to restore the initial factory settings. Default Tables General Setup TV Display OSD Lang Normal/PS English Captions On Last Memory On Preference Page TV Type PBC NTSC Off A u d i o Subtitle ENG Off D i s c M e n u ENG Note: 16

18 Technical Specifications Supply Voltage: Chassis Dimensions: Current Consumption: Support Discs: 10-30V DC Negative Ground 187x178x50 (mm) Less than 12V DC CD/DVD Recordable/Rewritable (CD-R/CD-RW DVD-R/- RW,+R/DVD+R DL) ISO 9660 level 1, level 2, Romeo, Joliet Supported File Extensions: USB Standard: Maximum Supply Current: MP3/WMA/MPEG/MP4/H.264/AVI(XVID) USB Type A 1.1/2.0 (Full Speed) Supports flash stick type devices, FAT32/16 file system, max capacity 32GB (Hard Disks and other computer peripherals are not supported.) 2.5A Aux RCA Audio Input: Audio Outputs: Video Output Formats: CVBS Input/Output level: HD Output Connection: HD Video Resolution: CVBS In/Out Connectors: 2.0V/10K Control output: 8.0+/- 0.5V p-p(10k ohms) Line Output 2.0V rms NTSC/PAL 1.0V p-p/75ω (+/-0.2V) HDMI-E 1080p upscaled (1920x1080) RCA Input BNC Output Note: Specifications and design are subject to modification, without notice, due to improvements in technology. 17

19 MENU Radio Engineering Industries, Inc. Rev D.4 Date: 07/11/18 POWER DVD PLAYER EJECT RESET RX SEL MA2A R

NOTICES NOTICE OF INTENDED USE

NOTICES NOTICE OF INTENDED USE USER MANUAL Thank you for buying this XTRONS product. Please read through these instructions so you will know how to operate this product properly. After you have finished reading the instructions, keep