Model Number(s): Mirage Media Server (Autonomic MMS-x Devices)
|
|
- Avis Ryan
- 6 years ago
- Views:
Transcription
1 Integration Note Manufacturer: Autonomic Model Number(s): Mirage Media Server (Autonomic MMS-x Devices) Minimum Core Module Version: 6.5 Comments: Written and tested with FW REV Document Revision Date: OVERVIEW AND SUPPORTED FEATURES The Autonomic Mirage Media Server is a 5 zone audio server with built-in storage, which can play local content as well as streaming Internet radio services. This driver allows one way control of the MMS Onscreen display (OSD) and the audio output to which it is connected, via Ethernet. NOTE: A fully featured two way driver exists for g!. This one way driver is designed primarily for environments where the MMS OSD is in use. THIS DRIVER SUPPORTS THE FOLLOWING FEATURES: One Way Control: The driver provides one way control of the MMS OSD. Output Selection: The driver can select which zone is to be controlled by the OSD. THIS DRIVER DOES NOT SUPPORT THE FOLLOWING FEATURES: Two-Way Control/Feedback/Metadata: Feedback of current status or display of library info/metadata from the MMS is not supported by this driver. Any feature not specifically noted as supported should be assumed to be unsupported. ELAN Home Systems 1690 Corporate Circle Petaluma, CA USA tech support: main: sales: elan@elanhomesystems.com 2013 ELAN Home Systems. All rights reserved. ELAN and g! are trademarks of ELAN Home Systems. All other trademarks are the property of their respective owners.
2 CONNECTION DIAGRAM: ETHERNET CONTROL Refer to the Bill of Materials and Wiring Diagram that follow. 2 Cat5/6 Cable 3 Network Assembly LAN on Router or Switch 1 Mirage Media Server 4 g! System Controller BILL OF MATERIALS 2 of 7
3 MMS SETUP The Mirage media server should be installed with cat5/6 cabling back to the network switch for communications. An appropriate video connection to a display is required to view the in-built OSD. Configuring a Static IP Address: In order to ensure reliable communication with g! it is strongly recommended that the MMS is configured with a static IP address in the same range as the g! controller. 1. First, the MMS must be physically connected to the network, with a computer connected to the same network. 2. Next, you need to access the settings page on the MMS. In a web browser, enter the IP address of the MMS (if you know it) followed by /config (for example, /config ), alternatively enter mirage-1/config. 3. On the Server Settings tab, scroll down to the Wired Ethernet section and choose Manual Configuration (Static IP) from the Connection dropdown menu. Five additional fields will appear: 4. Enter the desired IP address details into the relevant fields as in the above example and choose Save Changes. Updating Firmware In order for the driver to function fully, it is necessary for the MMS to be running firmware version 5.0 or later. Ordinarily, the latest firmware version can be downloaded and installed automatically via the web interface, however, at the time of writing this document, version 5.0 is available as a pre-release only. To download and install firmware version 5.0, perform the following steps: 1. Establish a telnet session to the MMS using port Run the command autoupdate Allow 20 minutes for installation to complete. NOTE: The telnet session will disconnect after the download is complete and the update will then be installed. It is important the MMS is left idle for at least 20 minutes as there is no notification when installation is complete. If you experience any problems during this process, contact Autonomic support (support@autonomic-controls.com). 3 of 7
4 Configuring Audio Outputs: Although any configuration of the audio zones is likely to have been performed by the installer upon installation, any required changes should be made prior to installing the g! driver. 1. Select the Source Settings tab on the MMS settings page. 2. In the Server Audio Outputs section, make any required changes to the configuration: Click on an ouput in the Name column to enter a new name. In the Gain column, disable a zone by selecting Disabled (or re-enable by choosing a gain type). 3. In the Airplay section, select any audio outputs for which Airplay should be enabled. 4. Choose Save Changes. Configuring Online Services: A number of online services can be enabled or disabled. The available online services will differ depending on your geographical region. NOTE: paid accounts may be required. 1. Select the Content tab on the MMS settings page. 2. For each available service that you wish to enable, ensure the checkbox is filled to the left of the service name. Click on Add Account for each service to enter your account details. 3. Choose Save Changes. g! SETUP Installing the driver: 1. In Configurator, go to the Media tab and add a new communication device, selecting Standard Connection as the Communication Type and Ethernet as the Hardware Type. Enter the IP address of the MMS (no need to enter a port number, as this automatically defaults to the correct value). 2. Right click on Two-Way Devices and choose Add New DVD Player, selecting Autonomic OSD from the list. Ensure your newly added device has the correct communication device selected. Next, choose the audio output that the driver is to control from the Settings dropdown menu. 3. Now we need to add an interface; right click on One-Way Devices and choose Add New Source. In the box that appears, enter a name for your interface and choose Autonomic as the template layout. In the Connect to Existing Device dropdown menu, select the two-way device you have just added (which is called Autonomic OSD by default). The driver is now configured and you should be able to add the Autonomic MMS into your system as a source on a Zone Controller in the usual way. Selecting the correct audio output: At any one time, the Mirage OSD is connected to (and controlling) one of its five audio outputs. As there may be other controllers in the system connecting to the MMS, it is possible that the OSD output could change. It is therefore necessary to add an event map in g! to ensure that the correct output is selected when the driver s source is selected. 1. In Configurator, choose Event Mapper and add a new Event Map, choosing an appropriate name. 4 of 7
5 2. Add an event to trigger when the Autonomic OSD source is selected on your chosen Zone Controller. 3. Choose to add a command for the event map, selecting DVD Player as the System Family, Autonomic OSD as the Command Group and Set OSD Instance as the command. When the driver s source is selected, this event map will trigger the MMS to set the OSD output to the one specified in the Settings field of the Autonomic OSD driver. 5 of 7
6 g! CONFIGURATION DETAILS The following table provides settings used in the g! Configurator. Please refer to the Configurator Reference Guide for more details. o <Select from list> Select the appropriate item from the list (or drop-down) in the Configurator. o <User Defined>, etc. Type in the desired name for the item. o <Auto Detect>, etc. The system will auto detect this variable. Refer to the g! System Programming Details below for additional information. 6 of 7
7 COMMON MISTAKES 1. Not properly configuring the MMS. The MMS should be configured according to the instructions above. 2. Not adding an Audio Zone Controller to the system. Audio Zones appear in the Viewer interface: until you add an Audio Zone, you will not see the MMS in the Viewer interface. Use the Single Zone Audio for a stand-alone audio zone where the MMS is driving speakers with a stand-alone amplifier. 3. Not adding Streaming Services properly. To use streaming radio, you must: Enable the service in the MMS settings. Enter valid login details in the MMS settings. 4. Not adding an Event Map to ensure the correct output is selected for the MMS OSD. Follow the instructions above. 5. Not selecting the MMS output to control in the Autonomic OSD driver s Settings field. 6. Attempting to use the same communication device as the full-control Autonomic connection. To use the Autonomic OSD, you must create a new communication device for the OSD and not attempt to use the communication providing 2-way control to the Autonomic Server. 7 of 7
Mirage Media Server (Autonomic MMS-x Devices)
Manufacturer: Autonomic Integration Note Model Number(s): Core Module Version: g! 6.5 Mirage Media Server (Autonomic MMS-x Devices) Comments: Written and tested with FW REV 5.0.14545.0 Document Revision
More informationSpeakerCraft Integration Guide
Manufacturer: SpeakerCraft Integration Guide Autonomic Model Number(s): SpeakerCraft App Version: Mirage Media Server (MMS-5, MMS-5A, MMS2, MMS2A) 1.2 and above Comments: Written and tested with FW REV
More informationAuriel Integration Guide
Manufacturer: Autonomic Auriel Integration Guide Model Number(s): Auriel Version: Mirage Media Server (MMS-5, MMS-5A, MMS2, MMS2A) 1.0 and above Comments: Written and tested with FW REV 5.0.14545.0 Document
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES. Model Number(s): SR5008/6008/7008
Manufacturer: Marantz Integration Note Model Number(s): SR5008/6008/7008 Minimum Core Module Version: 6.5 Comment: Tested SR7008 FW: 5330-0346-9582 Document Revision Date: 12/30/2013 OVERVIEW AND SUPPORTED
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES. Model Number(s): SR6006, SR5006
Manufacturer: Marantz Integration Note Model Number(s): SR6006, SR5006 Core Module Version: 5.4 or newer required Document Revision Date: 1/15/2013 OVERVIEW AND SUPPORTED FEATURES Marantz receivers include
More informationModel Number(s): WPS-300-DVR-9CH, WPS-300-DVR -16CH
Integration Note Manufacturer: SnapAV Model Number(s): WPS-300-DVR-9CH, WPS-300-DVR -16CH Core Module Version: 6.4.200 Comments: Hardware Version 02.00.00; Firmware Version 07.80.53 Document Revision Date:
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES INSTALLATION OVERVIEW. Model Number(s): V883, V85
Manufacturer: ELAN Home Systems Model Number(s): V883, V85 Core Module Version: 4.0.1288 and newer (V883) 4.0 1587 and newer (V85) Document Revision Date: 1/15/2013 Integration Note OVERVIEW AND SUPPORTED
More informationThe Texecom Premier Elite security panels integrate with the g! system using either an Ethernet connection or an RS-232 serial connection.
Manufacturer: Texecom Integration Note Model Number(s): Premier Elite Series Core Module Version: 6.4.200 Comments: Tested with Premier Elite 48 Document Revision Date: 8/6/2013 OVERVIEW AND SUPPORTED
More informationIntegra DTR-20.7/30.7/40.7/50.7/60.7/DHC-60.7 Onkyo TX-NR545/646TX-RZ800/900
Manufacturer: Model Number(s): Core Module Version: 7.2.639 Integra/Onkyo Comments: Tested: Integra 40.7 Document Revision Date: 10/12/2015 OVERVIEW AND SUPPORTED FEATURES Integration Note Integra DTR-20.7/30.7/40.7/50.7/60.7/DHC-60.7
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES THE FOLLOWING FEATURES ARE SUPPORTED: THE FOLLOWING FEATURES ARE NOT SUPPORTED:
Manufacturer: Atlona Integration Note AT-PRO2HD 88M, 1616M, 44M (HD-BaseT) AT-HD-V 44M, 1616M (HDMI) Model Number(s): AT-PRO3HD44M, 66M (HD-BaseT) AT-H2H-44M, 88M (HDMI) Device Tested: ATPRO2HD1616M FW1.1.14,
More informationVSX-60, SC-61, SC-63, SC-65, SC-67, SC-68
Manufacturer: Model Number(s): Pioneer Integration Note VSX-60, SC-61, SC-63, SC-65, SC-67, SC-68 Core Module Version: Core Module 5.8 or later required Comments: VSX-60 with FW 1-157-076-014-091 tested.
More informationCore Module Version: Comments: Firmware: Release 4.15, Prom v1.70g, DSP Document Revision Date: 1/10/2013
Manufacturer: ADA Integration Note Model Number(s): Suite 7.1 Core Module Version: Comments: Firmware: Release 4.15, Prom v1.70g, DSP 2.1.5201 Document Revision Date: 1/10/2013 OVERVIEW AND SUPPORTED FEATURES
More informationSoftware 4.0 Build Rel or later. Nuvo Grand Concerto FW v2.56, HWv00; M3 Server v1.60, ipod v1.53 Document Revision Date: 1/17/2013
Manufacturer: Model Number(s): Core Module Versions: Nuvo Grand Concerto Software 4.0 Build 1452.0 Rel or later Integration Note 6.0.236 and newer includes zone controller integration only, no virtual
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES. Model Number(s): Power Series / 5401
Manufacturer: DSC Integration Note Model Number(s): Power Series / 5401 Core Module Version: 4.0 (all builds) Comments: Document Revision Date: 1/30/2013 OVERVIEW AND SUPPORTED FEATURES The DSC Power Series
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES. Model Number(s): DSC POWER SERIES / IT-100
Manufacturer: DSC Integration Note Model Number(s): DSC POWER SERIES / IT-100 Core Module Version: 6.4.209 Comments: Document Revision Date: 9/11/2013 OVERVIEW AND SUPPORTED FEATURES The DSC Power Series
More informationMinimum Core Module Version: 4.0 Build 1452 Comments: AXIS IP Utility , Camera Firmware 4.40 Document Revision Date: 2/13/2013
Integration Note Manufacturer: Axis Model Number(s): 214PTZ Minimum Core Module Version: 4.0 Build 1452 Comments: AXIS IP Utility 2.21.0, Camera Firmware 4.40 Document Revision Date: 2/13/2013 OVERVIEW
More information4.0 Build or newer
Manufacturer: Model Number(s): Core Module Version: Comments: Nuvo Document Revision Date: 1/17/2013 Essentia E6G 4.0 Build 1452.0 or newer OVERVIEW AND SUPPORTED FEATURES THE FOLLOWING FEATURES ARE SUPPORTED:
More informationExtender Controller Integration Note
Extender Controller Integration Note Manufacturer: Model Number(s): ELAN SC2, SC10 Core Module Version: g! Core Module 7.0.178 Document Revision Date: 07/09/2014 OVERVIEW AND SUPPORTED FEATURES ELAN SC
More informationAudio Servers S1, H1, H3, H5CD and Others
Integration Note Manufacturer: S1Digital Model Number(s): Core Module Version: Comments: Audio Servers S1, H1, H3, H5CD and Others g! 6.0 and above Document Revision Date: 3/9/2016 S1Digital Software 2.2-2.4.x
More informationCamera Firmware or (5.50 fixes security vulnerability introduced in 5.20) Document Revision Date: 07/15/2016
Manufacturer: Model Number(s): Axis P3301 Integration Note Minimum Core Module Version: g! 6.1.34 Comments: Camera Firmware 5.11.1 or 5.50.4.4 (5.50 fixes security vulnerability introduced in 5.20) Document
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES. Model Number(s): MAXSYS Series
Manufacturer: DSC Integration Note Model Number(s): MAXSYS Series Core Module Versions: 4.0 (all builds) Comments: Document Revision Date: 1/30/2013 OVERVIEW AND SUPPORTED FEATURES The DSC MAXSYS Series
More informationHolovision units with VIK(sip) Intercom Modules. Firmware v 2.9 setup v For firmware v 1.09, please see Appendix 1
Integration Note Manufacturer: Model Number(s): Comments: Holovision SIP Door Station Holovision units with VIK(sip) Intercom Modules Firmware v 2.9 setup v 1.05 For firmware v 1.09, please see Appendix
More informationLive or Recorded Video: Video output from the NVR is not available in the ELAN Viewer.
Manufacturer: Model Number(s): Core Module Version: 7.3 SnapAV Document Revision Date: 10/10/17 OVERVIEW AND SUPPORTED FEATURES Integration Note LUM-500-NVR-4CH, LUM-500-NVR-8CH, LUM-500-NVR-16CH The SnapAV
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES
Manufacturer: Model Number(s): Minimum Core Module Version: Comment: Document Revision Date: Marantz Integration Note SR5008/5009/5010/5011/6008/6009/6010/6011/7008/7009/7010 /7011 NR1506/1606/1607 AV7703
More informationMinimum Core Module Version: g! version 5.4, requires S1616A Firmware Document Revision Date:
Manufacturer: ELAN Integration Note Model Number(s): System S1616A (Multi-Zone Control) Minimum Core Module Version: g! version 5.4, requires S1616A Firmware 2.0.2.2 Document Revision Date: 05-25-2017
More informationFurman F1000, F1500 Panamax M4320, MB1000, MB1500
Manufacturer: Model Number(s): Core Module Version: Document Revision Date: 2/1/2013 Furman, Panamax OVERVIEW AND SUPPORTED FEATURES Furman F1000, F1500 Panamax M4320, MB1000, MB1500 g! 5.6 or newer Integration
More informationModel Number(s): D7000, D9000 Series Panels, D7000/9000V2 Panels
Manufacturer: Bosch / Radionics Integration Note Model Number(s): D7000, D9000 Series Panels, D7000/9000V2 Panels Core Module Version: Comments: Tested Firmware Revisions: 6.80, 7.07 Document Revision
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES LUTRON LIGHTING SYSTEMS SUPPORT THE FOLLOWING FEATURES:
Integration Note Manufacturer: Model Number(s): Lutron Minimum Core Module Version: g! 7.3 Caseta Lighting Control Comments: Driver Version 0.0.9 Document Revision Date: 12/28/2015 OVERVIEW AND SUPPORTED
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): Roku All IP Controllable Roku Media Players g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 03/01/17 Overview
More informationA suggested source is Opternus:
Manufacturer: KNX Input / Output Integration Note Model Number(s): (Various) Core Module Version: g! Core Module 5.4 or newer Document Revision Date: 1/9/2013 OVERVIEW AND SUPPORTED FEATURES KNX systems
More informationIntegration Note. mhub4k431, mhub4k862, mhub4k44pro & mhub4k88pro
Integration Note Manufacturer: Model Number(s): HDAnywhere mhub4k431, mhub4k862, mhub4k44pro & mhub4k88pro g! Core Module Version: 8.1.401 Driver Developer: Core Programming Limited Document Revision Date:
More informationIMPORTANT! GE Caddx panels cannot support PIN codes then end in zero over RS-232. See Common Mistakes for more information.
Manufacturer: GE NetworX Integration Note Model Number(s): NX-4,6,8 Core Module Version: Document Revision Date: 01/09/2016 OVERVIEW AND SUPPORTED FEATURES The NetworX NX-4,6,8 security panels integrate
More informationAudio Integration Note
ELAN Home Systems Life Just Got Better Audio Integration Note Manufacturer: Elan Model Number(s): System 12 Comments: Version 5.0 (g!) requires S12 FW 2.02.00.04 Document Revision Date: 8/17/2011 OVERVIEW
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES. IP Video Cameras (See models list below) NOTE: Only Panasonic Petcams, Residential cams, and
Manufacturer: Panasonic Integration Note IP Video Cameras (See models list below) NOTE: Only Panasonic Petcams, Residential cams, and Model Number(s): Commercial cams are supported. The Panasonic i-pro
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Panasonic Model Number(s): Smart TV 2015+ g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 26/01/17 Overview & Supported
More informationMinimum Core Module Versions: ELAN version 7.1 ( for streaming audio) MRA Software or above Document Revision Date: 6/9/2017
Manufacturer: SpeakerCraft Integration Note Model Number(s): MRA664 Minimum Core Module Versions: ELAN version 7.1 (8.1.398 for streaming audio) Comments: MRA Software 1.4.510 or above Document Revision
More informationTHIS SONOS CONNECT AMP DRIVER SUPPORTS THE FOLLOWING FEATURES: Any feature not specifically noted as supported is not supported.
Integration Note Manufacturer: Model Number(s) Sonos Sonos Connect Amp (+ Virtual Aux Feeds) Minimum Core Module Version: 7.3.271 Document Revision Date 01/03/2016 v1.0.6 OVERVIEW AND SUPPORTED FEATURES
More informationor newer required for Shoutcast internet radio or newer required for itunes and m4a file support Notes:
Manufacturer: HC Internal Player Integration Note Core Module Versions: 5.1.401 or newer required for Shoutcast internet radio 5.2.568 or newer required for itunes and m4a file support Notes: This document
More informationIntegration Note. Virtual Matrix: The driver offers the ability to receive the auxiliary input feed from up to three other Sonos units
Integration Note Manufacturer: Sonos Model Number(s): Sonos PLAYBAR up to ver. 7.1 g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 03/01/2017 OVERVIEW
More informationIntegration Note. Virtual Matrix: The driver offers the ability to receive the auxiliary input feed from up to six other Sonos units
Integration Note Manufacturer: Sonos Model Number(s): Sonos ALL Models up to ver. 7.1 g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 03/01/2017 OVERVIEW
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): Apple 4 th Generation Apple TV g! Core Module Version: 8.1.164 Driver Developer: Core Programming Limited Document Revision Date: 28 th Dec 2016 Overview
More informationwoodbourne setup instructions using Wi-Fi or ethernet connections
woodbourne setup instructions using Wi-Fi or ethernet connections Woodbourne setup instructions using Wi-Fi or Ethernet connection This document explains how to set up your Woodbourne wireless loudspeaker
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES. Model Number(s): Gemini P9600
Manufacturer: Napco Integration Note Model Number(s): Gemini P9600 Core Module Versions: 4.0 Build 220 and later Comments: Panel Firmware V20 or higher Document Revision Date: 10/26/17 OVERVIEW AND SUPPORTED
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): KODI Various g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 05/01/2017 Overview & Supported Features
More informationAudio Integration Note
OneHome Management and Control Solutions Audio Integration Note Manufacturer: Elan Model Number(s): S8.6 OneHome Software ver. 4.0 rel 1288 or later S8.6 Firmware compatible with HomeLogic 1.0.2.1 1.0.4.1
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES. Minimum Core Module Version: Document Revision Date: 09/25/2017
Integration Note Manufacturer: Pentair Water Model Number(s): IntelliTouch, EasyTouch Minimum Core Module Version: Document Revision Date: 09/25/2017 OVERVIEW AND SUPPORTED FEATURES Installing a Pentair
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES. Model Number(s): (Various)
Integration Note Manufacturer: KNX Lighting Model Number(s): (Various) Minimum Core Module Version: 5.4 Document Revision Date: 2/11/2013 OVERVIEW AND SUPPORTED FEATURES KNX lighting systems are designed
More informationR2D7 Serial Interface for RP60 motor
Integration Note Manufacturer: Electronic Solutions, Inc. Model Number(s): R2D7 Serial Interface for RP60 motor Minimum Core Module Version: Document Revision Date: 2/11/2013 OVERVIEW AND SUPPORTED FEATURES
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): Rotel T11 DAB Tuner (RS232) g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 03/01/2017 Overview & Supported
More informationAny feature not specifically noted as supported is not supported.
Manufacturer: Model Number(s): Minimum Core Module Version: Document Revision Date: ELAN Integration Note EL-4KM-V44-KIT (Device Ver 3.06; Web Module Ver 6.20) EL-4KM-V88 (Device Ver 1.16; Web Module Ver
More informationBEST PRACTICES: SETUP
Rev:180125-0235 BEST PRACTICES: SETUP CONTACTING TECH SUPPORT Phone: (866) 838-5052 (704) 909-5229 Email: TechSupport@SnapAV.com This document outlines the best practices for setting up a home network
More informationIntegration Note. Ovation Summit OS Solo & Duet, some OMS(x) Fusion Research, Inc.
Integration Note Manufacturer: Model Number(s): Fusion Research Ovation Summit OS Solo & Duet, some OMS(x) Core Module Version: Driver Developer: Fusion Research, Inc. Document Revision Date: 2018-04-13
More informationHHR: HR10 Wi-Fi Handheld Remote Control
Manufacturer: Model Number(s): ELAN Home Systems Integration Note HHR: HR10 Wi-Fi Handheld Remote Control Minimum Core Module Version: ELAN 8.2 Main Application Version: 0.7.8.0 Comments: Boot Version:
More informationThe Octava HDDSX Matrix System works in conjunction with a Cisco SG-300 series managed Ethernet switch.
The System works in conjunction with a Cisco SG-300 series managed Ethernet switch. Note- we recommend using your SG300 series Ethernet switch as a dedicated switch for video matrix switching only. You
More informationLite H.264 DVR Setup Guide
Package Content Lite H.264 DVR Setup Guide Inspect the packaging carton. Make sure the Lite H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following items.
More informationControl4 Driver v5. programming guide. for Mirage Media Server. compatible with. mms 5a. mms 2a. mms 1e OS 2.8+
programming guide 042517 Control4 Driver v5 for Mirage Media Server compatible with mms 5a mms 2a mms 1e OS 2.8+ 2006 2017 Autonomic Controls, Inc. Autonomic and TuneBridge are registered trademarks of
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES
Manufacturer: Model Number(s): KNX Climate (Various) Minimum Core Module g! 5.4 Version: g! 6.2 Minimum for Fan Coil Climate Modes Document Revision Date: 10/8/2015 OVERVIEW AND SUPPORTED FEATURES Integration
More informationIntegration Note OVERVIEW AND SUPPORTED FEATURES INTEGRATION REQUIREMENTS. DoorBird Firmware and greater. Document Revision Date: 11/15/2017
Integration Note Manufacturer: Bird Home Automation GmbH Model Number(s): Comments: Document Revision Date: 11/15/2017 DoorBird D10x, D20x OVERVIEW AND SUPPORTED FEATURES DoorBird Firmware 000099 and greater
More informationIntegration Note. Manufacturer: OVERVIEW AND SUPPORTED FEATURES
Manufacturer: Model Number(s): Minimum Core Module Version: Document Revision Date: ELAN Integration Note EL-4KPM-V66-A1812 (Device Ver 3.06; Web Module Ver 6.20) EL-4KPM-V88-A2416 (Device Ver 3.06; Web
More informationIntegration Note. Overview & Supported Features THE FOLLOWING OPTIONS ARE SUPPORTED BY THIS DRIVER: NOT RECOMMENDED
Integration Note Manufacturer: Model Number(s): Amazon Fire TV Box g! Core Module Version: 8.0.278 Driver Developer: Core Programming Limited Document Revision Date: 03/01/17 Overview & Supported Features
More informationTHIS NIKO HOME CONTROL DRIVER SUPPORTS THE FOLLOWING FEATURES: Any feature not specifically noted as supported is not supported.
Integration Note Manufacturer: Niko Model Number(s) Niko Home Control (Lighting) Minimum Core Module Version: 7.3.271 Document Revision Date 02/03/2016 v2.0.2 OVERVIEW AND SUPPORTED FEATURES This driver
More informationLighting Integration Note
OneHome Management and Control Solutions Lighting Integration Note Manufacturer: Lutron Model Number(s): RadioRA 2 Comments: HomeLogic 5.0 ONLY, RadioRA2 Software 0.9.17 or newer Document Revision Date:
More informationAudio Integration Note
OneHome Audio Integration Note Manufacturer: Vaux Electronics, Inc. Model Number(s): Lattis LE-400, LE-800, LE-1600 Comments: Document Revision Date: 9/7/06 OVERVIEW AND SUPPORTED FEATURES THE FOLLOWING
More informationIntegration Note. Any feature not specifically noted as supported should be assumed to be unsupported.
Integration Note Manufacturer: Model Number(s): Amazon Fire TV g! Core Module Version: 8.2.650.2 Driver Developer: Intrinsic Group Limited Document Revision Date: 4 th January 2019 Overview & Supported
More information1 Log into DIGIOP Control
DIGIOP Control Quick Start Guide DIGIOP Control enables centralized configuration of systems, devices, users, and permissions. It is a web-based administration portal that allows you to manage your video
More informationPlusConnect GatesAir Sigma
PlusConnect GatesAir Sigma Installation and Operation Manual Installation and Operation Manual REV B Table of Contents Introduction... 1 Compatibility... 1 Unpacking... 2 Front Panel Indicators... 2 Hardware
More informationHS1200N Wireless N Hotspot
HS1200N Wireless N Hotspot Firmware Release Notes Copyright Copyright 2015 NetComm Wireless Limited. All rights reserved. The information contained herein is proprietary to NetComm Wireless. No part of
More informationSTEP 1 GETTING STARTED
GETTING STARTED STEP 1 Check Package Contents for: 1.) One HMPS2U Wireless Multifunction USB Device Server 2.) Setup CD with Wireless Multifunction USB Device Server Software 3.) One DC 12V/1.5A Power
More informationSetup and Configuration
Setup and Configuration OmniStream TM Solution Guide OmniStream Atlona Setup Guide Version Information Version Release Date Notes 1 02/19 Initial release 2 03/19 Audio added 3 03/19 USB added OmniStream
More informationMEDIA CONTROL SERVER 2.0
MEDIA CONTROL SERVER 2.0 Version 2.0 Getting Started Guide This getting started guide will help you install and configure the Autonomic Controls Media Control Server and Mirage client. Contents OVERVIEW...
More informationThe Applications and Gaming Tab - Port Range Forward
The Applications and Gaming Tab - Port Range Forward The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized
More informationPCD-FDE1 Network Controller Installation Manual
PCD-FDE1 Network Controller Installation Manual Product Overview Perkins Innovation PCD-FDE1 provides direct access and remote control of a Russound multiroom audio system from an Apple iphone, ipod touch,
More informationAuriel Training Guide. Version 1.4
Auriel Training Guide Version 1.4 Copyright Copyright Niles Audio, LLC. All Rights Reserved. All brand or product names used in this document are trademarks, registered trademarks, trade names, or service
More informationControl4 sample Install
Setup guide 090117 Control4 sample Install for Autonomic Streamers and Amplifiers compatible with mms 5a mms 2a mms 1e OS 2.8+ 2006 2017 Autonomic Controls, Inc. Autonomic and TuneBridge are registered
More informationAudio Integration Note
ELAN Home Systems Life Just Got Better Audio Integration Note Manufacturer: Model Number(s): SpeakerCraft MZC-64, MZC-66, MZC-88 Software & Firmware Versions: See table below for tested software and firmware
More informationDescriptions of connection. Cabling with Amplifier and Speaker
Descriptions of connection Cabling with Amplifier and Speaker The Loxone Speakers can be operated in mono or stereo mode. In larger rooms two Speakers in mono mode are recommended and in smaller rooms
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationControls. Assisted. Audio ACTION. Captivate your. Connect. This. From. audio STEP Provider drop-down. menu and. field. just Op Assisted.
USE R GUIDE Adobe Connect Operator Assisted Audio Controls Guide forr Hosts Captivate your audience by integrating Operator Assisted audio conferencing service with the cutting edge Adobe Connect online
More informationSet Up Guide MOOD: Connect Set Up Listen. USING YOUR MOOD PROFUSION io FOR SIMPLE PERSONALIZED UNLIMITED ECONOMICAL LICENSED
Set Up Guide USING YOUR MOOD PROFUSION io FOR 1 2 3 Connect Set Up Listen MOOD: SIMPLE PERSONALIZED UNLIMITED ECONOMICAL LICENSED Welcome Thank you for choosing Mood to provide your Pandora listening experience
More informationNXT Controller Manual IP Assignment in WAN Environments Application Note
It is difficult to perform NXT controller IP address assignment and auto-configuration when controllers are on different subnets from the local PC (the PC from which the Doors.NET client is run). This
More informationCaptivate your audience by integrating Operator Assi sted audio conferencing with the cutting edge Adobe Connect online collaboration solution.
ADOBE CONNECT O P E R A T O R A S S I S T E D A U D I O C O N T R O L S U S E R G U I D E F O R H O S T S Captivate your audience by integrating Operator Assi sted audio conferencing with the cutting edge
More informationNew: Product Sheet Mirage eseries Audio Distribution over IP. Content: Why eseries? What you need to know about the eseries models
New: Central music server and network streamer 4 zone amplifier, 30 Watts per zone Audio distribution over IP, 2 audio streams for 4 zones Expandable to up to 32 independent streams for 96 zones Free drivers
More informationThe TELUS Business Connect Mobile solution. Admin guide
The TELUS Business Connect Mobile solution Admin guide Table of contents. Part Getting started 4 Introduction 5 Admin homepage 5 Main functions 5 Admin Portal 5 My Extension 6 Do Not Disturb 7 RingOut
More informationACCREDITED SOLUTION. EXPLORER 500 COMREX ACCESS Rack Stereo BRIC IP Codec
ACCREDITED SOLUTION EXPLORER 500 COMREX ACCESS Rack Stereo BRIC IP Codec Document Name: EXPLORER 500 COMREX ACCESS Rack Stereo BRIC IP Codec Revision: Introduction: This document describes how to configure
More informationTable of Contents. Camera Anatomy... pg 1. Package Contents... pg 2. Camera Assembly... pg 3. Account Login... pg 5. Adding a New Camera...
Table of Contents Camera Anatomy... pg 1 Package Contents... pg 2 Camera Assembly... pg 3 Account Login... pg 5 Adding a New Camera... pg 6 Wireless Configuration... pg 9 WPS Enabled Routers... pg 13 Technical
More informationAPPLICATION ADMINISTRATOR GUIDE
APPLICATION ADMINISTRATOR GUIDE BrightSign Network Enterprise Edition Version 4.2 BrightSign, LLC. 16780 Lark Ave., Suite B Los Gatos, CA 95032 408-852-9263 www.brightsign.biz TABLE OF CONTENTS Introduction
More informationPeplink SD Switch User Manual. Published on October 25th, 2018
Peplink SD Switch User Manual Published on October 25th, 2018 1 Table of Contents Switch Layout 4 Specifications 5 Hardware Overview 6 Quick Start Functions 7 Reset Switch 7 Connect Ethernet 7 Connect
More informationFor U.S. customers, call Customer Service or us with your comments, questions, suggestions, and concerns.
Revision G Important Notice Copyright 2017 WatchGuard, Inc. All rights reserved. This document and supporting data are the exclusive property of WatchGuard, Inc. and may not be copied and/or reproduced
More informationStandard H.264 DVR Setup Guide
Package Content Standard H.264 DVR Setup Guide Inspect the packaging carton. Make sure the Standard H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following
More informationDMP 128 Plus C V DMP 128 Plus C V AT
DMP 128 Plus C V DMP 128 Plus C V AT Interactive Intelligence Configuration Guide REVISION: 1.0.1 DATE: MARCH 7 TH 2018 Revision Log Date Version Notes Feb 9 th 2018 1.0 First Release: Applies to Firmware
More informationNUBIX H.264 DVR Setup Guide
Package Content NUBIX H.264 DVR Setup Guide Inspect the packaging carton. Make sure the NUBIX H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following
More informationDocument Revision: C
Document Revision: C Important Notice Copyright 2014 Enforcement Video, L.L.C. (dba WatchGuard Video). All rights reserved. This document and supporting data are the exclusive property of Enforcement Video,
More informationSetting up ADSL2MUE 2.18-AU firmware for Bridge Mode
Setting up ADSL2MUE 2.18-AU firmware for Bridge Mode Rhod Brown Systems Engineer Cisco-Linksys ANZ Preface A small number of ADSL2MUEs shipped in Australia and New Zealand with a non standard Linksys interface.
More informationLAN-505 Ethernet Communication
Ethernet Communication 1.0 Purpose of this Document This document discusses how to setup, configure, and use the Universal Device Server to provide LAN/WAN Ethernet connectivity between Doors and one or
More informationelan-rs485/ /2017 / rev.0 Page 1 of 19
Page 1 of 19 Introduction... 4 Device description... 4 Examples connection... 5 Installing, IP address... 6 Logging to the web interface... 7 Settings... 8 Settings description of functions... 9 Devices
More informationAVE DR16X / AVE DR8X Quick Installation Guide
AVE DR16X / AVE DR8X Quick Installation Guide Package Content Inspect the packaging carton. Make sure your AVE DR16X / AVE DR8X is properly delivered. Remove all items from the box and make sure the box
More informationR4, R8, R16 Digital Video Recorders Quick Setup Guide
R4, R8, R16 Digital Video Recorders Quick Setup Guide This guide provides instructions to initially setup the R16 (16 channel) digital video recorders (DVR). The DVR supports these advanced features: 2
More information960H H.264 DVR Setup Guide
Package Content 960H H.264 DVR Setup Guide Inspect the packaging carton. Make sure the 960H H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following items.
More informationQuick Start Guide. Hybrid DVR DS-9000HFI-ST Series Hybrid DVR. NVR DS-9600NI-ST Series NVR. First Choice For Security Professionals
Quick Start Guide Hybrid DVR DS-9000HFI-ST Series Hybrid DVR NVR DS-9600NI-ST Series NVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access
More informationRingCentral Contact Center Voice User Guide
RingCentral Contact Center Voice User Guide RingCentral Contact Center Voice User Guide Contents Contents Overview....................................... 3 Installation......................................
More information