Matrix Technical Support Mailer 42_NVR SATATYA NVR registration on MATRIX DNS Server

Transcription

1 Dear Friends, Matrix Technical Support Mailer 42_NVR SATATYA NVR registration on MATRIX DNS Server This MTSM will help user to register SATATAYA NVR on MATRIX DNS Server. What is DNS : DNS stands for Domain Name System, which maps IP address of the Device or Service to Domain Name or Host Name. DNS translates a user-friendly domain name like into an IP Hence, user can directly access service or application using Domain Name. Matrix DNS Service : Matrix Server provides free DNS facility. So, user can directly register SATATYA products on Matrix DNS Server with desired name and get access of same.

2 Internet connectivity is the primary requirement for Registration of NVR with Matrix DNS Server. Let s see the configuration flow for registration of SATATYA NVR on Matrix DNS server. Scenario 1: SATATYA NVR is behind Router. 1. Open SATATYA NVR Web client. 2. Enter IP address of SATATYA NVR with Login credentials. default IP address of LAN Port 1 of SATATYA NVR is and default user name and password is admin.

3 3. Click on Device Configuration to open Configuration Settings window. 4. Navigate to Network Settings and specify Network parameters in LAN 1 i.e. IP Address, Subnet Mask, Default Gateway, DNS Settings.

4 For example, specify static IP Address as , Subnet Mask as , Default Gateway as and specify Prferred DNS as and Alternate DNS as Save configuration changes. 6. Now, specify HTTP Port and TCP Port in Basic settings.

5 Default HTTP Port is 80 and TCP Port is Save configuration changes.

6 8. Now, navigate to Matrix DNS Client under Network Settings. 9. To activate Matrix DNS Service, enable Matrix DNS service flag. Here, specify the desired Host Name along with Forwarded HTTP Port number and click Register.

7 10. Now, SATATYA NVR will send request to the MATRIX DNS server for registration of host name. Successful registration of the same will be confirmed by a pop-up message Successfully Registered! 11. Click OK to confirm.

8 12. Save configuration changes.

9 13. After configuring Matrix DNS Server parameters, click Static Routing option under Network Settings. 14. Select Default Exit Interface as LAN1

10 15. Save configuration changes.

11 Default Exit Interface is LAN 1 with factory default settings. 16. Now, for behind Router application, user needs to forward HTTP port i.e. 80 and TCP port i.e to the LAN IP Address of SATATYA NVR i.e

12 Now, user can access SATATYA NVR remotely using Host Name i.e. in NVR Web client or Internet Explorer.

13 Scenario 2: MATRIX SATATYA NVR is with Mobile Broadband using 2G or 3G USB Data card. To access Broadband, open MATRIX SATATYA NVR Web client and navigate to device configuration as explained in scenario Navigate to Broadband option under Network Settings. 2. Select appropriate Active Profile.

14 3. Save configuration changes.

15 4. Now, set Profile parameters. For instance, we have specified broadband parameters for Reliance service provider such as Profile Number Profile Name Dial Number User Name Password Service APN Details 5. Click Save to update configuration changes.

16 6. Click on status to know about the network connectivity and IP address assigned by the service provider.

17 It can be a Public or Private IP Address with DHCP mode. It is mandatory that the service provider allocates public IP to access the device using mobile broadband. In case if Private IP is allotted by the service provider, user can t access the device from public network. 7. In case of Broadband connectivity port forwarding for HTTP and TCP port is not required. Also user can use default HTTP and TCP ports configured in the General Settings page and register the same HTTP port on Matrix DNS server. 8. Click Save to update configuration changes.

18 9. Now, navigate to Matrix DNS Client under Network Settings. 10. To activate Matrix DNS Service, enable Matrix DNS service flag. Here, specify the desired Host Name along with Forwarded HTTP Port number and click Register.

19 11. Now, SATATYA NVR will send request to the MATRIX DNS server for registration of host name. Successful registration of the same will be confirmed by a pop-up message Successfully Registered! 12. Click OK to confirm.

20 13. Save configuration changes.

21 14. Now, click Static Routing option under Network Settings. Select Default Exit Interface as Broadband and save configuration changes.

22 Now, user can access SATATYA NVR remotely using Host Name i.e. in NVR Web client or Internet Explorer.

23 In this way user can register SATATAYA NVR on Matrix DNS server. For more information, contact: Technical Support Team Matrix Comsec, Vadodara, India. Disclaimer: The information contained in this and/or attachment may contain confidential or privileged information. Unauthorized use, disclosure or copying is strictly prohibited and may constitute unlawful act and can possibly attract legal action, civil and/or criminal. The contents of this message need not necessarily reflect or endorse the views of Matrix Comsec Pvt. Ltd on any subject matter. Any action taken or omitted on this message is not entirely at your risk and the originator of this message nor does Matrix Comsec Pvt. Ltd take any responsibility or liability towards the same. If you are not the intended recipient, please notify us immediately and permanently delete the message.