INSTALLATION INSTRUCTIONS Data Management Software Suite in the Evaluation Mode
|
|
- Vernon Simmons
- 6 years ago
- Views:
Transcription
1 INSTALLATION INSTRUCTIONS Data Management Software Suite in the Evaluation Mode Overview Here are instructions for installing and configuring the Data Management Software Suite, which includes DataFinder Server, Analysis Server and DIAdem Advanced in the evaluation Mode. The installation requires an internet connection. 1. Start the installation through the USB interface. 2. Click Install DataFinder Server & Analysis Server 2017 SP1. 3. Follow the instructions of the installation program.
2 4. After the reboot, a configuration assistant will automatically start and lead you through the basic setup. Starting the wizard may take a few minutes. If the TDM Server Control Panel does not start, please start the application manually. 5. A message box opens. 6. Click OK. 7. Please wait for the NI Web Server Guided Setup. Opening the associated configuration dialog box may take a few minutes. Select Help Me Choose a Preset to go through a series of questions to choose the right preset for your web server. Alternatively, select the server configuration preset to start with Insecure Remote Access if you want to access the TDM Server on your local network. The following steps describe the configuration with Insecure Remote Access. 2 ni.com Data Management Software Suite Evaluation
3 8. Select Insecure Remote Access only if you are sure that you will access the TDM Server from the same machine. 9. Click Next. Data Management Software Suite Evaluation National Instruments Ireland Resources Limited 3
4 10. Enter and confirm a password for the web administrator. You will need this password to log on to the TDM Server as administrator. The user name for the web administrator is admin and cannot be changed. 11. Click Next. 4 ni.com Data Management Software Suite Evaluation
5 12. Select the HTTP port. Change the default port number only if there is another web server that uses this port number. 13. Click Next. Data Management Software Suite Evaluation National Instruments Ireland Resources Limited 5
6 14. The configuration summary displays. 15. Click Finish. 6 ni.com Data Management Software Suite Evaluation
7 16. The TDM Server Control Panel dialog box opens in the wizard mode. 17. If you want to review or modify your settings or if you want to make special settings, click Configure. If not, click Continue. 18. Configure the account under which the server runs. Select how to log on. Select Local system account if you do not need to process any files on the network with the TDM Server Suite. Data Management Software Suite Evaluation National Instruments Ireland Resources Limited 7
8 19. Select This account and enter appropriate Windows credentials if you want to process any files on the network. 20. Click Continue. Answer any further inquiries with Yes. 21. Select Evaluation and click Start Licensing Wizard to activate the license through TDM Server Licensing Wizard. 8 ni.com Data Management Software Suite Evaluation
9 22. Click Evaluate. 23. Click Yes. 24. Follow the instructions of the TDM Server Licensing Wizard. This requires an internet connection. The wizard will ask you for your NI user account. Add all required pages as trusted sites. Data Management Software Suite Evaluation National Instruments Ireland Resources Limited 9
10 25. After completing the installation go back to the TDM Server Manager. 26. Click Open TDM Server Manager to open the TDM Server Manager in the default internet browser. The user name for the web administrator is admin. 10 ni.com Data Management Software Suite Evaluation
11 27. Login with the username and password you defined in the step TDM Server Account. Click TDM Server Manager to start setting up your new preprocessing and analysis routines. Data Management Software Suite Evaluation National Instruments Ireland Resources Limited 11
12 Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR , DFAR , and DFAR National Instruments Ireland Resources Limited. All rights reserved A-01 Oct17
INSTALLATION INSTRUCTIONS Data Management Software Suite
INSTALLATION INSTRUCTIONS Data Management Software Suite Contents Overview... 1 Installing the NI Volume License Manager... 2 Installing TDM Server... 3 Set Up NI Volume License Manager... 18 Register
More informationINSTALLATION INSTRUCTIONS Data Management Software Suite
INSTALLATION INSTRUCTIONS Data Management Software Suite Contents Overview... 1 Installing NI Volume License Manager... 2 Configuring NI Volume License Manager... 2 Installing and Configuring TDM Server...
More informationNOTE TO USERS NI 61xx Pinout Labels for the SCB-68 Multifunction I/O S Series Modules/Devices Using the 68-Pin Shielded Connector Block
NOTE TO USERS NI xx Pinout Labels for the SCB- Multifunction I/O S Series Modules/Devices Using the -Pin Shielded Connector Block If you are using an NI xx (formerly referred to as S Series) multifunction
More informationLabVIEW DataFinder Toolkit
LabVIEW DataFinder Toolkit Use the NI LabVIEW DataFinder Toolkit to work with the DataFinder in LabVIEW. You can use the DataFinder to search for simple texts or to execute extended queries for specific
More informationNOTE TO USERS NI 65xx Pinout Labels for the SCB-100 Digital I/O Modules/Devices Using the 100-Pin Shielded Connector Block
NOTE TO USERS NI xx Pinout Labels for the SCB-100 Digital I/O Modules/Devices Using the 100-Pin Shielded Connector Block If you are using an NI xx (formerly referred to as DIO Series) digital I/O device
More informationFoundation Fieldbus Hardware and NI-FBUS Software
INSTALLATION GUIDE Foundation Fieldbus Hardware and NI-FBUS Software This guide contains installation and configuration instructions for the PCI-FBUS, PCMCIA-FBUS, and USB-8486. Note Install the NI-FBUS
More informationSystem Overview and Terms
GETTING STARTED GUIDE NI Condition Monitoring Devices and NI InsightCM Server Version 3.0 This document contains step-by-step instructions for the setup tasks you must complete to connect an NI Condition
More informationContents. Getting Started. RELEASE NOTES TestStand ATML Toolkit Version 2017
RELEASE NOTES TestStand ATML Toolkit Version 2017 These release notes contain TestStand ATML Toolkit 2017 system requirements, installation instructions, information about new features, and other changes
More informationNI VeriStand Model Framework
INTRODUCTION NI VeriStand Model Framework The NI VeriStand software and the NI LabVIEW Model Interface Toolkit allow you to run simulations of your simulation models written in C and C++. To enable your
More informationIntroduction... 1 System Diagram... 2 Hardware... 2 Powering the Hardware... 3 Wiring Harness... 5
USER MANUAL NI 9756 NI Powertrain Controls USB NOx Module Kit Contents Introduction... 1 System Diagram... 2 Hardware... 2 Powering the Hardware... 3 Wiring Harness... 5 Introduction The National Instruments
More informationLabWindows /CVI Version 2017
RELEASE NOTES LabWindows /CVI Version 2017 These release notes introduce LabWindows /CVI 2017. Refer to this document for system requirements, installation and activation instructions, and information
More informationBracket and Mounting Dimensions
INSTALLATION GUIDE NI PS-14/15/16/17 Panel Mount Brackets This document provides the installation procedure for the NI PS-14/15/16/17 Panel Mount Brackets. Use accessory 199432-01 to mount NI PS-14/15/16/17
More informationLabWindows /CVI Version 2015
RELEASE NOTES LabWindows /CVI Version 2015 These release notes introduce LabWindows /CVI 2015. Refer to this document for system requirements, installation and activation instructions, and information
More informationUSER GUIDE USB-634x/635x/636x OEM X Series USB-6341/6343/6356/6361/6363/6366 OEM Devices
USER GUIDE USB-x/x/x OEM X Series USB-///// OEM Devices This document provides dimensions, pinouts, and information about the connectors, switch, LEDs, and mounting holes of the National Instruments USB-
More informationLabVIEW VI Analyzer Toolkit
USER GUIDE LabVIEW VI Analyzer Toolkit The LabVIEW VI Analyzer Toolkit allows you to interactively and programmatically test VIs to find areas for improvement. The toolkit contains tests that address a
More informationC Support for myrio 5.0 User Guide
C Support for myrio 5.0 User Guide C Support for myrio provides tools for you to program the myrio by using non- LabVIEW programming languages, such as the C programming language. C Support for myrio includes
More informationContents. Software. CALIBRATION PROCEDURE NI 9216/ Channel, 24-Bit, 100 Ω/1000 Ω RTD Analog Input Module
CALIBRATION PROCEDURE NI 9216/9226 8-Channel, 24-Bit, 100 Ω/1000 Ω RTD Analog Input Module This document contains the verification and adjustment procedures for the National Instruments 9216 and National
More informationCALIBRATION PROCEDURE NI channel, ±2- ma/±10 V, 24-bit Analog Input Module. ni.com/manuals
CALIBRATION PROCEDURE NI 9207 16-channel, ±2- ma/±10 V, 24-bit Analog Input Module Français Deutsch ni.com/manuals This document contains the verification and adjustment procedures for the National Instruments
More information±10 V, 20 MS/s/ch, 14-Bit, 4-Channel C Series Digitizer Module
CALIBRATION PROCEDURE NI 9775 ±10 V, 20 MS/s/ch, 14-Bit, 4-Channel C Series Digitizer Module This document contains the verification and adjustment procedures for the NI 9775. For more information on calibration,
More informationNI TestStand ATML Toolkit Version 2013
RELEASE NOTES NI ATML Toolkit Version 2013 These release notes contain NI ATML Toolkit 2013 system requirements, installation instructions, information about new features, and other changes since the ATML
More informationNI REM Remote I/O Overview DATASHEET. Bus Coupler for Remote I/O
DATASHEET NI REM-11180 Bus Coupler for Remote I/O Deterministic communication and data transfer to host system EtherCAT cycle time of
More informationNI TestStand ATML Toolkit
RELEASE NOTES NI ATML Toolkit Version 2012 Contents Getting Started New Users These release notes contain NI ATML Toolkit 2012 system requirements, installation instructions, information about new features,
More informationContents. Software. CALIBRATION PROCEDURE NI Channel, 300 Vrms, 24-Bit, Simultaneous, Channel-to-Channel Isolated Analog Input Module
CALIBRATION PROCEDURE NI 9225 3-Channel, 300 Vrms, 24-Bit, Simultaneous, Channel-to-Channel Isolated Analog Input Module Français Deutsch ni.com/manuals This document contains the verification and adjustment
More informationNI REM Remote I/O Overview DATASHEET. Digital Input Module for Remote I/O
DATASHEET NI REM-11154 Digital Input Module for Remote I/O Read digital input frequencies up to 5 khz Adjustable filter time to improve measurement quality Spring-terminal connectors allow fast wiring
More informationNI R Series. Contents. Software CALIBRATION PROCEDURE
CALIBRATION PROCEDURE NI R Series NI PCIe-784xR, NI PXI-784xR, NI PXIe-784xR, NI USB-784xR, NI PCIe-785xR, NI PXI-785xR, NI PXIe-785xR, and NI USB-785xR This document contains the verification and adjustment
More informationUSER MANUAL NI 9755 NI Powertrain Controls CompactRIO NOx Sensor Module Kit
USER MANUAL NI 9755 NI Powertrain Controls CompactRIO NOx Module Kit Contents Introduction... 1 System Diagram... 2 Hardware... 2 Powering the Hardware... 3 Wiring Harness... 5 Introduction The National
More informationNI PCIe-784xR, NI PXI-784xR, NI PXIe-784xR, NI USB-784xR, NI PCIe-785xR, NI PXI-785xR, NI PXIe-785xR, NI USB-785xR, and NI PXIe-786xR
CALIBRATION PROCEDURE NI R Series NI PCIe-784xR, NI PXI-784xR, NI PXIe-784xR, NI USB-784xR, NI PCIe-785xR, NI PXI-785xR, NI PXIe-785xR, NI USB-785xR, and NI PXIe-786xR This document contains the verification
More informationUSER GUIDE I/O Accessory For the NI PCIe-8237R GigE Vision Interface Device
USER GUIDE I/O Accessory For the NI PCIe-8237R GigE Vision Interface Device The I/O Accessory for NI PCIe-8237R GigE Vision Interface Device (I/O Accessory) is a terminal block that simplifies power and
More informationThese specifications apply to the 1 m and 3 m TriaxM-TriaxM. it in a manner not described in this document.
SPECIFICATIONS TriaxM-TriaxM Low Noise Triaxial to Triaxial Cable for SMUs These specifications apply to the 1 m and 3 m TriaxM-TriaxM. Caution You can impair the protection provided by the TriaxM-TriaxM
More informationNI USRP-2900/2901. Contents. Electromagnetic Compatibility Guidelines GETTING STARTED GUIDE. Universal Software Radio Peripheral
GETTING STARTED GUIDE NI USRP-2900/2901 Universal Software Radio Peripheral This document explains how to install, configure, and test your NI universal software radio peripheral (USRP) 2900 or 2901 (NI
More informationCALIBRATION PROCEDURE PXIe channel, 16-bit, 400 ks/s/ch, Ch-Ch Isolated Analog Input Module. ni.com/manuals
CALIBRATION PROCEDURE PXIe-4310 8-channel, 16-bit, 400 ks/s/ch, Ch-Ch Isolated Analog Input Module Français Deutsch ni.com/manuals This document contains the verification and adjustment procedures for
More informationContents. Software. CALIBRATION PROCEDURE NI Channel, ±5 V, 24-Bit Software-Selectable IEPE and AC/DC Analog Input Module
CALIBRATION PROCEDURE NI 9234 4-Channel, ±5 V, 24-Bit Software-Selectable IEPE and AC/DC Analog Input Module This document contains the verification and adjustment procedures for the National Instruments
More informationNI REM Remote I/O Overview DATASHEET. Digital Output Module for Remote I/O
DATASHEET NI REM-11178 Digital Output Module for Remote I/O Short circuit and overload protection Drives up to 500 ma per channel (up to 8A per module) Spring-terminal connectors allow fast wiring without
More informationINSTALLATION INSTRUCTIONS SH160F-160M-NI SwitchBlock Cable
INSTALLATION INSTRUCTIONS SH160F-160M-NI SwitchBlock Cable This guide describes how to connect and use the National Instruments SH160F-160M-NI SwitchBlock shielded cable which has a maximum voltage rating
More informationNI TSM-101x. LCD Characteristics NI TSM-1012 NI TSM-1015 SPECIFICATIONS. NI TSM-1012, NI TSM-1015, NI TSM-1017 Touch Screen Monitors
SPECIFICATIONS NI TSM-101x NI TSM-1012, NI TSM-1015, NI TSM-1017 Touch Screen Monitors This document provides the specifications for the NI TSM-101x. Specifications are subject to change without notice.
More informationRTM Contents. Definitions. Conditions SPECIFICATIONS. High-Speed Serial Rear Transition Module for ATCA
SPECIFICATIONS RTM-3662 High-Speed Serial Rear Transition Module for ATCA Contents Definitions...1 Conditions... 1 High-Speed Serial Interface... 2 Power... 2 Maximum Power Requirements...2 Maximum Working
More informationR Series Digital I/O Module for PCI Express, 128 DIO, 512 MB DRAM, Kintex-7 160T FPGA. This document describes how to begin using the PCIe-7821R.
GETTING STARTED GUIDE NI PCIe-7821R R Series Digital I/O Module for PCI Express, 128 DIO, 512 MB DRAM, Kintex-7 160T FPGA This document describes how to begin using the PCIe-7821R. Safety Guidelines Caution
More informationTestStand. Contents RELEASE NOTES. Version 2017
RELEASE NOTES TestStand Version 2017 These release notes contain TestStand 2017 system requirements, licensing information, and installation instructions. The release notes also contain instructions for
More informationNI REM Remote I/O Overview DATASHEET. Analog Output Module for Remote I/O
DATASHEET NI REM-11115 Analog Output Module for Remote I/O Four voltage output ranges to choose from (0 V to 10V, ±10V, 0 V to 5 V, and ±5V) Two current output ranges to choose from (0 ma to 20mA, 4 ma
More informationGETTING STARTED GUIDE NI Channel, 50 Arms Continuous, 24-Bit, Analog Input Module
GETTING STARTED GUIDE NI 9247 3-Channel, 50 Arms Continuous, 24-Bit, Analog Input Module This document explains how to connect to the NI 9247. Note Before you begin, complete the software and hardware
More informationWarranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.
SPECIFICATIONS USB-6501 24-Channel, 8.5 ma, Digital I/O Device Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.
More informationNI sbrio Safety Guidelines GETTING STARTED GUIDE. Single-Board RIO OEM Devices. This document describes how to begin using the NI sbrio-9627.
GETTING STARTED GUIDE NI sbrio-9627 Single-Board RIO OEM Devices This document describes how to begin using the NI sbrio-9627. Safety Guidelines Operate the sbrio-9627 only as described in the user documentation.
More informationRTM Contents. Definitions. Conditions SPECIFICATIONS. PCI Express Rear Transition Module for ATCA
SPECIFICATIONS RTM-3661 PCI Express Rear Transition Module for ATCA Contents Definitions...1 Conditions... 1 Host Bus Interface...2 High-Speed Serial Interface... 2 Power... 2 Maximum Power Requirements...2
More informationR Series for PXI Express Digital RIO with Kintex-7 325T FPGA. ni.com/manuals. This document explains how to install and configure the NI PXIe-7822R.
GETTING STARTED GUIDE NI PXIe-7822R R Series for PXI Express Digital RIO with Kintex-7 325T FPGA Français Deutsch 日本語한국어简体中文 ni.com/manuals This document explains how to install and configure the NI PXIe-7822R.
More informationGETTING STARTED GUIDE
GETTING STARTED GUIDE NI 9795 WSN C Series Gateway This guide describes how to install, configure, and verify the National Instruments 9795 Wireless Sensor Network (WSN) C Series gateway, NI WSN nodes,
More informationR Series for USB Multifunction RIO with Kintex-7 70T FPGA. ni.com/manuals. Electromagnetic Compatibility Guidelines
GETTING STARTED GUIDE NI USB-7845R R Series for USB Multifunction RIO with Kintex-7 70T FPGA Français Deutsch 日本語한국어简体中文 ni.com/manuals This document explains how to install and configure National Instruments
More informationThermal Kit for NI sbrio-9607/9627/9637
INSTALLATION AND SPECIFICATIONS MANUAL Thermal Kit for NI sbrio-9607/9627/9637 The Thermal Kit for NI sbrio-9607/9627/9637 is a heat spreader accessory used to improve the thermal performance of the NI
More informationSCXI -1104/C. Contents CALIBRATION PROCEDURE. For NI-DAQmx
CALIBRATION PROCEDURE SCXI -1104/C For NI-DAQmx Contents This document contains information and instructions for calibrating the National Instruments SCXI-1104/C signal conditioning module. Conventions...
More informationUSB Definitions. Conditions. Analog Input SPECIFICATIONS. 8 AI (10 ks/s), 4 DIO USB Multifunction I/O Device
SPECIFICATIONS USB-6000 8 AI (10 ks/s), 4 DIO USB Multifunction I/O Device Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered by
More informationNI ELVIS RIO Control Module
USER MANUAL NI ELVIS RIO Control Module The NI ELVIS RIO Control Module is a reconfigurable I/O (RIO) device that is used to design control, robotics, and mechatronics systems. This document contains pinouts,
More informationReconfigurable Embedded Chassis with Integrated MXI-Express (x1) MXI-Express Switch
USER MANUAL Reconfigurable Embedded Chassis with Integrated MXI-Express (x1) This document describes the features of the and contains information about mounting and operating the device. Upstream Connection
More informationSCXI -1102/B/C. Contents CALIBRATION PROCEDURE. For NI-DAQmx
CALIBRATION PROCEDURE SCXI -1102/B/C For NI-DAQmx Contents This document contains information and instructions for calibrating the National Instruments SCXI-1102/B/C signal conditioning module. Conventions...
More informationWarranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.
SPECIFICATIONS USB-8501 NI-XNET CAN LS/FT Interface Note Specifications are subject to change without notice. Definitions Warranted specifications describe the performance of a model under stated operating
More informationOPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9476E. 32-Channel, 24 V Sourcing Digital Output Module
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9476E 32-Channel, 24 V Sourcing Digital Output Module This document describes how to use the National Instruments 9476E and includes dimensions, connector assignments,
More informationNI WSN-9791 Ethernet Gateway
GETTING STARTED GUIDE NI WSN-9791 Ethernet Gateway This guide describes how to install, configure, and verify the National Instruments Wireless Sensor Network (WSN) 9791 gateway, NI WSN nodes, and NI software.
More informationCALIBRATION PROCEDURE NI PXIe Channel, Isolated Voltage/Current Analog Output Module
CALIBRATION PROCEDURE NI PXIe-4322 8-Channel, Isolated Voltage/Current Analog Output Module This document contains the verification and adjustment procedures for the National Instruments PXIe-4322 module.
More informationThe NI TB-2648/2649/2650/2651 terminal blocks configure your NI PXI/PXIe-2531 (NI 2531) in one of the following topologies. 1-wire 8 64 matrix
INSTALLATION INSTRUCTIONS NI TB-//0/ Terminal Blocks for the NI PXI/PXIe- Introduction The NI TB-//0/ terminal blocks configure your NI PXI/PXIe- (NI ) in one of the following topologies. Table. NI Configurations
More informationPower and I/O Accessory
USER MANUAL Power and I/O Accessory For IS-178x Smart ameras The Power and I/O Accessory for IS-178x Smart ameras (Power and I/O Accessory) is a terminal block that simplifies power and I/O signal configuration
More information24-Channel, ±24 V Precision PXI Source Measure Unit
GETTING STARTED GUIDE PXIe-4163 24-Channel, ±24 V Precision PXI Source Measure Unit This document explains how to install, configure, and test the PXIe-4163. The PXIe-4163 ships with NI-DCPower driver
More informationR Series Reconfigurable I/O Module (AI, AO, DIO) for PXI Express, 6 AI, 18 AO, 48 DIO, 1 MS/s AIO, 512 MB DRAM, Kintex-7 160T FPGA
GETTING STARTED GUIDE NI PXIe-7867R R Series Reconfigurable I/O Module (AI, AO, DIO) for PXI Express, 6 AI, 18 AO, 48 DIO, 1 MS/s AIO, 512 MB DRAM, Kintex-7 160T FPGA This document describes how to begin
More informationElectromagnetic Compatibility Guidelines
GETTING STARTED GUIDE Power Amplifier Français Deutsch ni.com/manuals This document explains how to install, configure, and set up the power amplifier. NI-DAQmx 9.8 has added support for the device. To
More informationGETTING STARTED GUIDE NI V, 32-Channel (Sinking Input), 7 µs C Series Digital Module
GETTING STARTED GUIDE NI 9425 24 V, 32-Channel (Sinking Input), 7 µs C Series Digital Module This document explains how to connect to the NI 9425. In this document, the NI 9425 with spring terminal and
More informationGETTING STARTED GUIDE NI Channel Solid-State Relay (SSR) Digital Output Module
GETTING STARTED GUIDE NI 9485 8-Channel Solid-State Relay (SSR) Digital Output Module This document explains how to connect to the NI 9485. Note Before you begin, complete the software and hardware installation
More informationSAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION. NI CompactDAQ Four-Slot Controller with Quad-Core Processor
SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION NI cdaq -9136 NI CompactDAQ Four-Slot Controller with Quad-Core Processor This document includes compliance precautions and connection information for
More information12-Channel, ±24 V Precision PXI Source Measure Unit
GETTING STARTED GUIDE PXIe-4162 12-Channel, ±24 V Precision PXI Source Measure Unit This document explains how to install, configure, and test the PXIe-4162. The PXIe-4162 ships with NI-DCPower driver
More informationLabVIEW FPGA Module Version 2013
RELEASE AND UPGRADE NOTES LabVIEW FPGA Module Version 2013 This document contains instructions for installing the LabVIEW 2013 FPGA Module and related products, introduces new features, and provides information
More informationGETTING STARTED GUIDE NI AO, 0 ma to 20 ma, 16 Bit Simultaneous
GETTING STARTED GUIDE NI 9266 8 AO, 0 ma to 20 ma, 16 Bit Simultaneous This document explains how to connect to the NI 9266. In this document, the NI 9266 with screw terminal and the NI 9266 with DSUB
More informationPXI and PXI Express Chassis Fan Replacement
INSTALLATION GUIDE PXI and PXI Express Chassis Fan Replacement This guide describes how to replace the fan on a PXI and PXI Express chassis. Cautions Make sure to unplug the power cord before replacing
More informationR Series for USB Multifunction RIO with Kintex-7 70T FPGA. ni.com/manuals
USER MANUAL R Series for USB Multifunction RIO with Kintex-7 70T FPGA Français Deutsch 日本語한국어简体中文 ni.com/manuals This document provides dimensions, connectivity information, and pinouts for the National
More informationThis installation guide describes how to install and connect signals to the NI TBX-2808 screw terminal accessory for use with NI SwitchBlock cards.
INSTALLATION INSTRUCTIONS NI TBX-2808 Screw Terminal Accessory for the NI SwitchBlock This installation guide describes how to install and connect signals to the NI TBX-2808 screw terminal accessory for
More informationR Series for USB Multifunction RIO with Kintex-7 160T FPGA. ni.com/manuals
USER MANUAL NI USB-7856R OEM R Series for USB Multifunction RIO with Kintex-7 160T FPGA Français Deutsch 日本語한국어简体中文 ni.com/manuals This document provides dimensions, connectivity information, and pinouts
More informationNI-Industrial Communications for EtherCAT
INSTALLATION GUIDE NI-Industrial Communications for EtherCAT This document explains how to install the NI-Industrial Communications for EtherCAT software and describes the hardware and software requirements.
More information8 AI (12-Bit, 10 ks/s), 2 AO (150 Hz), 12 DIO USB Multifunction I/O Device
SPECIFICATIONS USB-6008 8 AI (12-Bit, 10 ks/s), 2 AO (150 Hz), 12 DIO USB Multifunction I/O Device Definitions Warranted specifications describe the performance of a model under stated operating conditions
More informationIVN Safety Guidelines GETTING STARTED GUIDE. 100BASE-T1 Media Converter
#6-32 GETTING STARTED GUIDE IVN-8561 100BASE-T1 Media Converter IVN-8561 100BASE-T1 Media Converter POWER P1 P3 MASTER LINK/ACT POWER PORT 4 5V 2.8W MAX This document describes how to begin using the IVN-8561
More informationNI CMS Contents MAINTAINING HARDWARE. NI Condition Monitoring System for NI InsightCM Enterprise
MAINTAINING HARDWARE NI CMS-9068 NI Condition Monitoring System for NI InsightCM Enterprise This document describes how to maintain the CMS-9068 NI Condition Monitoring System. The CompactRIO-based CMS-9068
More information10 MHz to 6 GHz, x86 Processor, GPS-Disciplined OCXO, USRP Software Defined Radio Stand-Alone Device
GETTING STARTED GUIDE USRP-2974 10 MHz to 6 GHz, x86 Processor, GPS-Disciplined OCXO, USRP Software Defined Radio Stand-Alone Device This document explains how to install, configure, and test the USRP-2974
More informationUSRP Contents. Verifying the System Requirements GETTING STARTED GUIDE. USRP Software Defined Radio Stand-Alone Device
GETTING STARTED GUIDE USRP-2974 USRP Software Defined Radio Stand-Alone Device This document explains how to install, configure, and test the USRP-2974 Software Defined Radio Stand-Alone Device. The USRP-2974
More informationGETTING STARTED GUIDE NI Channel, 60 V, High-Speed, Sourcing Digital Output Module
GETTING STARTED GUIDE NI 9475 8-Channel, 60 V, High-Speed, Sourcing Digital Output Module This document explains how to connect to the NI 9475. Note Before you begin, complete the software and hardware
More information1- or 2-Port, High-Speed/FD, USB CAN Interface Device
SPECIFICATIONS USB-8502 1- or 2-Port, High-Speed/FD, USB CAN Interface Device This document lists specifications for the USB-8502 1-port and 2-port high-speed/fd CAN interface device. Definitions Warranted
More informationContents. Software CALIBRATION PROCEDURE NI TC-4353
CALIBRATION PROCEDURE NI TC-4353 This document contains the verification procedure for the National Instruments TC-4353. For more information about calibration solutions, visit ni.com/calibration. Contents
More informationNI DataFinder Server Edition
NI DataFinder Server Edition Search Engine for Technical Data NI DataFinder Server Edition July 2015 374430K Support Worldwide Technical Support and Product Information ni.com Worldwide Offices Visit ni.com/niglobal
More informationContents. CALIBRATION PROCEDURE NI PXIe-5624R 2 GS/s, 12-Bit IF Digitizer
CALIBRATION PROCEDURE NI PXIe-5624R 2 GS/s, 12-Bit IF Digitizer This document contains the verification and adjustment procedures for the NI PXIe-5624R (NI 5624R) IF digitizer. Refer to ni.com/calibration
More informationNI CMS Contents MAINTAINING HARDWARE. NI Condition Monitoring System for NI InsightCM Enterprise
MAINTAINING HARDWARE NI CMS-9024 NI Condition Monitoring System for NI InsightCM Enterprise This document describes how to maintain the CMS-9024 NI Condition Monitoring System. The CompactRIO-based CMS-9024
More informationPXIe Contents. Verifying the System Requirements GETTING STARTED GUIDE. 32-Channel Digital Pattern Instrument
GETTING STARTED GUIDE PXIe-6571 32-Channel Digital Pattern Instrument Note Before you begin, install and configure your chassis and controller. This document explains how to install, configure, and test
More informationR Series for USB Multifunction RIO with Kintex-7 160T FPGA. ni.com/manuals. Electromagnetic Compatibility Guidelines
USER MANUAL R Series for USB Multifunction RIO with Kintex-7 160T FPGA Français Deutsch 日本語한국어简体中文 ni.com/manuals This document provides compliance, pinout, connectivity, mounting, and power information
More informationATCA Contents. Definitions SPECIFICATIONS. FPGA Module for ATCA
SPECIFICATIONS ATCA-3671 FPGA Module for ATCA Contents Definitions...1 Conditions... 2 Reconfigurable FPGA...2 FPGA Resources... 2 FPGA Digital Input/Output...2 Onboard DRAM...3 Jitter Cleaning Dual Phase
More informationNI DIAdem. Getting Started with DIAdem. Getting Started with DIAdem. May P-01
TM NI DIAdem Getting Started with DIAdem Getting Started with DIAdem May 2017 373422P-01 Worldwide Technical Support and Product Information ni.com Worldwide Offices Visit ni.com/niglobal to access the
More informationNI Safety Guidelines. Safety Guidelines for Hazardous Locations GETTING STARTED GUIDE. Ethernet Expansion Chassis for C Series Modules
GETTING STARTED GUIDE NI 9149 Ethernet Expansion Chassis for C Series Modules This document describes how to begin using the NI 9149. Safety Guidelines Caution Do not operate the NI 9149 in a manner not
More informationSH Cable Specifications
SH96-96-1 Cable Specifications This document lists specifications for the SH96-96-1 shielded cable. These specifications are typical for the range of 0 C to 55 C unless otherwise stated. The system must
More informationNI USB Contents. Electromagnetic Compatibility Guidelines GETTING STARTED GUIDE. 10 MHz to 18 GHz RF Power Meter
GETTING STARTED GUIDE NI USB-5684 10 MHz to 18 GHz RF Power Meter This document explains how to install, configure, and set up the NI USB-5684 radio frequency (RF) power meter. NI RF power meters make
More informationElectrical. SPECIFICATIONS SH Cable
SPECIFICATIONS SH96-96-1 Cable When this symbol is marked on a product, it denotes a warning advising you to take precautions to avoid electrical shock. This icon denotes a caution, which advises you of
More informationINSTALLATION INSTRUCTIONS NI TB-2630B Terminal Block for the NI PXI-2530B. Contents. Introduction
INSTALLATION INSTRUCTIONS Terminal Block for the Contents Introduction This guide describes how to install and connect signals to the National Instruments TB-2630B terminal block to configure your switch
More informationCALIBRATION PROCEDURE CAL Contents. Software
CALIBRATION PROCEDURE CAL-4353 Français Deutsch ni.com/manuals Contents Software This document contains information about verifying and adjusting National Instruments NI PXIe-4353 modules using NI-DAQmx
More informationEmbedded Real-Time Controller with Reconfigurable FPGA for C Series Modules. This document describes how to begin using the NI crio-9064.
GETTING STARTED GUIDE NI crio-9064 Embedded Real-Time Controller with Reconfigurable FPGA for C Series Modules This document describes how to begin using the NI crio-9064. Safety Guidelines Caution Do
More informationNI SMD-7610 Stepper Drives and NI 9512 C Series Modules
GETTING STARTED NI SMD-7610 Stepper Drives and NI 9512 C Series Modules This document explains how to install and configure the NI SMD-7610 stepper drives for use with the NI 9512 C Series drive interface
More informationLabVIEW Release Notes
LabVIEW Release Notes LabVIEW 2011 Installation Guide These release notes contain installation instructions for LabVIEW and system requirements for the LabVIEW software. If you are upgrading from a previous
More informationNI PCIe Hardware Overview. Functional Overview USER MANUAL. Base, Medium, Full, and Extended Configuration Camera Link Frame Grabber
USER MANUAL NI PCIe-1477 Base, Medium, Full, and Extended Configuration Camera Link Frame Grabber The NI PCIe-1477 is an image acquisition device with a PCIe 2.0 x8 host interface. It has a user-configurable
More informationFigure 1. NI-7935R. Related Information For information about the device specifications, refer to the NI-7935R Specifications at ni.com/manuals.
GETTING STARTED GUIDE NI-7935R Controller for FlexRIO This document describes how to begin using the NI-7935R. Figure 1. NI-7935R For information about the device specifications, refer to the NI-7935R
More informationNI DIAdem. Getting Started with DIAdem. Getting Started with NI DIAdem. July M-01
TM NI DIAdem Getting Started with DIAdem Getting Started with NI DIAdem July 2014 373422M-01 Support Worldwide Technical Support and Product Information ni.com Worldwide Offices Visit ni.com/niglobal to
More informationEmbedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGA
GETTING STARTED GUIDE NI crio-9035 Embedded CompactRIO Controller with Real-Time Processor and Reconfigurable FPGA This document describes how to begin using the National Instruments crio-9035. Safety
More information