CCENT Practice Certification Exam # 2 - CCNA Exploration: Accessing the WAN (Version 4.0)
|
|
- Wilfred Thornton
- 6 years ago
- Views:
Transcription
1 CCENT Practice Certification Exam # 2 - CCNA Exploration: Accessing the WAN (Version 4.0) 1. Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.) The UDP destination port number identifies the application or service on the server which will handle the data. TCP is the preferred protocol when a function requires lower network overhead. UDP segments are encapsulated within IP packets for transport across the network. The source port field identifies the running application or service that will handle data returning to the PC. The TCP source port number identifies the sending host on the network. The TCP process running on the PC randomly selects the destination port when establishing a session with the server. 2. In what two situations would UDP be the preferred transport protocol over TCP? (Choose two.) when applications need to guarantee that a packet arrives intact, in sequence, and unduplicated when a faster delivery mechanism is needed when delivery overhead is not an issue when applications do not need to guarantee delivery of the data when destination port numbers are dynamic 3. Refer to the exhibit. Workstation A sends an IP packet to workstation B. Which two statements describe the encapsulation of the packet as it passes through the network? The Layer 2 header is stripped from the packet by each router. The destination Layer 2 address of the packet does not change. The source Layer 3 address of the packet changes at each router. The Layer 2 header changes at each router. The Layer 3 header is stripped from the packet by each router. 4. Refer to the exhibit. A switch with a default configuration connects four hosts. The ARP table for host A is shown. What happens when host A wants to send an IP packet to host D?
2 Host A sends an ARP request to the MAC address of host D. Host D sends an ARP request to host A. Host A sends out the packet to the switch. The switch sends the packet only to the host D, which in turn responds. Host A sends out a broadcast of FF:FF:FF:FF:FF:FF. Every other host connected to the switch receives the broadcast and host D responds with its MAC address. 5. What three services are provided by the transport layer? (Choose three.) flow control encryption of data path determination connection establishment error recovery bit transmission data representation 6. Which layer of the OSI model handles the process of identifying and discarding damaged frames? presentation session transport network data link physical 7. Refer to the exhibit. Considering the information that follows and the exhibit, where is the data flowing? Source IP address:
3 Destination IP address: Source MAC address: a Destination MAC address: 00-0d-cc-f4-ad-2c Source Port: 1464 Destination Port: 23 A from laptop to access point B from access point to attached switch C from host to default gateway router D from router to ISP 8. Refer to the exhibit. If Host 1 needs to request its IP address from the server, what protocol would be used to process that request?
4 CSMA/CD CSMA/CA DHCP ICMP NAT FTP 9. Refer to the exhibit. If Host 1 were to transfer a file to the server, what layers of the TCP/IP model would be used?
5 only application and Internet layers only Internet and network access layers only application, Internet, and network access layers application, transport, Internet, and network access layers only application, transport, network, data link, and physical layers application, session, transport, network, data link, and physical layers 10. ABC company needs to connect its router to an ISP to access the Internet. What device is needed to connect the router to the ISP if the ISP supplies a T1 leased line for the connection? CSU/DSU modem DSL router NT1 device ISDN modem 11. Refer to the exhibit. How many collision domains exist in the exhibited network? What are two actions performed by a Cisco switch? (Choose two.) building a routing table that is based on the first IP address in the frame header using the source MAC addresses of frames to build and maintain a MAC address table forwarding frames with unknown destination IP addresses to the default gateway utilizing the MAC address table to forward frames via the destination MAC address examining the destination MAC address to add new entries to the MAC address table
6 13. A network administrator wants to configure a Cisco 2960 switch so that access to each switch port is limited to one MAC address. What will accomplish the administrator s objective? Cisco Discovery Protocol port security Internet Control Message Protocol access lists flow control 14. When would you want to use the switchport port-security mac-address sticky command? whenever you need to protect an unused switch port whenever you want the port to only allow a single host device to connect whenever you need the port to recognize the statically assigned MAC address in the MAC address table whenever multiple devices share the same port 15. Refer to the exhibit. SW_1 and SW_2 have been configured with VLAN10 and VLAN20. The two switches are connected by a trunking link. During testing, workstations on the same VLAN can ping each other, but workstations on the opposite VLAN cannot ping each other. What needs to be done to fix the problem? Configure VTP on both switches so they can share VLAN information. Assign a management VLAN on each switch with IP addresses in the same subnet. Configure an access port on each switch.
7 Add a Layer 3 device to the network. 16. When configuring a switch to use SSH for virtual terminal connections, what is the purpose of the crypto key generate rsa command? show SSH connected hosts disconnect SSH connected hosts create a public and private key pair show active SSH ports on the switch access the SSH database configuration 17. Which three statements are true about full-duplex operation on an Ethernet network? (Choose three.) There are no collisions in full-duplex mode. A dedicated switch port is required for each node. Hub ports are preconfigured for full-duplex mode. The host network card must detect the availability of the media before transmitting. The host network card and the switch port must both be in full-duplex mode. 18. What are three characteristics of CSMA/CD? (Choose three.) Devices can be configured with a higher transmission priority. A jam signal indicates that the collision has cleared and the media is not busy. A device listens and waits until the media is not busy before transmitting. The device with the electronic token is the only one that can transmit after a collision. All of the devices on a segment see data that passes on the network medium. After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired Which three addresses are valid public addresses? (Choose three.) Refer to the exhibit. Four hosts are being added to the network. Which IP address is invalid as a host address for this network?
8 Refer to the exhibit. Using PAT, RouterA is configured to translate all private inside addresses to a single public address. The network administrator wants to determine which port number is being used in the translation of the ComputerA inside private IP address. Which command could be used if the administrator sits at ComputerA but is not allowed remote access to RouterA? ipconfig /all traceroute netstat tracert 23. What type of address is with the subnet mask ? This is a usable host address. This is a broadcast address. This is a network address. This is an Internet-routable address. 24. The router reads each bit to determine the class of an address. Which three series of binary numbers would the router identify as public Class C addresses? (Choose three.)
9 Given a host with the IP address and a subnet mask of , to which network does the host belong? Refer to the exhibit. Which IP address can be assigned to the default gateway for host A? Refer to the exhibit. What would be a valid network address for the new subnet on RTA? / / / / / Refer to the exhibit. The network shown is using classful subnetting. The serial link between routers A and B is configured with addresses from the /23 subnet. How many valid IP addresses are wasted on this subnetwork?
10 What are three valid host addresses given a subnet mask of ? (Choose three.) Refer to the exhibit. Which two interfaces could be used for a leased-line WAN connection? (Choose two.)
11 A B C D E F 31. What type of cable is used for connectivity between a model 2620 router and a model 2950 switch (point A), a model 2950 switch and a model 1900 switch (point B), and a model 2950 switch and a host (point C)? A straight-through; B rollover; C straight-through A crossover; B straight-through; C straight-through A straight-through; B straight-through; C crossover A crossover; B straight-through; C crossover A straight-through; B crossover; C straight-through A straight-through; B crossover; C crossover 32. Refer to the exhibit. A small business has asked for advice about what type of cable will be needed to connect their modular routers. What type of connector is used by each device that is shown?
12 WIC-2T is a DB60 connector, WIC1T is a Smart Serial connector, and WIC-1ENET is an RJ45 connector. WIC-2T is an RJ45 connector, WIC1T is a DB60 connector, and WIC-1ENET is a Smart Serial connector. WIC-2T is a DB60 connector, WIC1T is a Smart Serial connector, and WIC-1ENET is an RJ45 connector. WIC-2T is a Token Ring connector, WIC1T is a DB25 connector, and WIC-1ENET is an RJ11 connector. WIC-2T is a Smart Serial connector, WIC1T is a DB60 connector, and WIC-1ENET is an RJ45 connector. 33. Refer to the exhibit. The router that is named myhome has received a frame from the host The contents of this frame are being sent to host What is the Layer 2 destination address of the frame as it leaves the myhome router? 0008.a3b6.ce a8 000a.8a47.e
13 34. Why is it important for the router to maintain an accurate routing table? to provide Layer 2 addressing information for the next hop to prevent broadcasts from occurring on the LAN to determine the best path to the destination network to identify all of the routers in a network 35. Refer to the exhibit. Based on the exhibited router output, what two conclusions can be made? (Choose two.) The enable password has been encrypted. The service password-encryption command has not been added to the configuration. The passwords that are shown restrict access to the router console. The password that will gain access to privileged mode is sys#op. The passwords that are shown will be required to enter privileged EXEC mode on this router. 36. What would be a common reason to upgrade from RIPv1 to RIPv2? RIPv2 takes less router memory than RIPv1 takes. RIPv2 supports a larger network (more routers) than RIPv1 supports. RIPv2 supports discontiguous networks and RIPv1 does not. RIPv2 supports classless routing. RIPv1 is classful. 37. Refer to the exhibit. Which two statements are true of the output shown? (Choose two.)
14 The protocol that communicated this information operates at Layer 3 of the OSI model. The output of this command displays information about directly connected Cisco devices only. The switch is attached to the SanJose1 FastEthernet0/21 interface. SanJose1 is running CDP version SanJose1 has two fully operational, CDP-enabled Cisco switches directly connected to it. SanJose2 is a 2600 series router running several routed protocols. 38. Which two statements describe the command ip route ? (Choose two.) A packet that is destined for host will be forwarded to address The address is the destination network for this route.
15 The address is the next-hop router in this command. This command is issued from the interface configuration mode. This command is used to define a static route. 39. Which group of commands allows a router to be administered remotely? line con 0 password class login interface fa0/1 ip address access-class 1 in line vty 0 4 password cisco login interface vlan 1 ip address no shutdown 40. Which protocol is described as an enhanced distance vector routing protocol? RIP v1 RIP v2 EIGRP OSPF 41. Why is the ip host command used to create host tables on Cisco routers? to create static routes to specific hosts to allow communication with other IP devices by name to provide a meaningful name for the local router to identify only the directly attached networks and associated hosts to define the host devices with which the router is allowed to connect 42. Refer to the exhibit. From router R1, the command telnet is entered from privileged mode and this message displays: 00:06:45: %SYS-5-CONFIG_I: Configured from console by console Trying Open Password required, but none set If the R2 interfaces are in the status shown in the exhibit, what is the most likely problem?
16 The enable secret command is missing from R2. The enable password command is missing from R1. The login command is missing from the line configuration mode on R2. The password command is missing from the line configuration mode on R2. The login command is missing from the console mode on R2. The no shutdown command is missing from the Serial 0/0 interface mode on R Which two items can be modified by the system administrator to determine from where the Cisco IOS loads? (Choose two.) system ROM startup configuration file system image file configuration register value bootloader image file 44. What are two requirements for establishing a console communication session between a computer and a router? (Choose two.) A console cable must be used from the console port of the router to the NIC of the computer. A rollover cable must be used from the console port of the router to the serial port of the computer. A default gateway must be configured on the computer. The IP addresses assigned to the router and computer must be on the same subnetwork. There must be a terminal emulator application on the computer What is the outcome when a wireless host has a different SSID configured than the access point to which it is attempting to connect? The access point will send the host a rejection message. The host will be prompted for a userid and password.
17 The access point will send the host a challenge message. The host will only be allowed access to the Internet. The access point will send the host a re-authentication request message. The host will not be allowed access to the wireless network. 47. A wireless network has one access point installed. Users at some locations in the office complain that their wireless access is slow, while others say that the wireless network performance is fine. What should be done to remedy this situation? Replace the access point. Install another access point at another location within the office. Upgrade the wireless NICs in the hosts that are slow. Limit the number of wireless hosts that attach to the access point at one time. Convert back to a wired network. 48. Which technology is primarily used for security in a wireless network environment? SSH WPA SSID CSMA/CA CSMA/CD Which technology is primarily used in a WAN? ARP CDP PPP WEP CSMA/CD
1. Which OSI layers offers reliable, connection-oriented data communication services?
CCNA 1 Practice Final Exam Answers v4.0 100% 1. Which OSI layers offers reliable, connection-oriented data communication services? application presentation session transport network 2. Refer to the exhibit.
More informationCISCO EXAM QUESTIONS & ANSWERS
CISCO 100-101 EXAM QUESTIONS & ANSWERS Number: 100-101 Passing Score: 800 Time Limit: 120 min File Version: 35.5 http://www.gratisexam.com/ CISCO 100-101 EXAM QUESTIONS & ANSWERS Exam Name: CCNA Interconnecting
More informationExam E1 Copyright 2010 Thaar AL_Taiey
Exam E1 2 Exam E1 E1-1. Which of the following statements is true regarding the internetwork shown in Figure E1-1? (Select all that apply) Figure E1-1 A Sample Internetwork A. The link number 15 uses a
More informationCCNA 1 Final Exam Answers UPDATE 2012 eg.1
CCNA 1 Final Exam Answers UPDATE 2012 eg.1 January 12th, 2012AdminLeave a commentgo to comments Which of the following are the address ranges of the private IP addresses? (Choose three.) 10.0.0.0 to 10.255.255.255
More informationCCNA 1 Final Exam Answers UPDATE 2012 eg.2
CCNA 1 Final Exam Answers UPDATE 2012 eg.2 January 12th, 2012AdminLeave a commentgo to comments 1. When must a router serial interface be configured with the clock rate command? when the interface is functioning
More informationCisco.BrainDump v by.MuTe
Cisco.BrainDump.100-101.v2013-06-25.by.MuTe Number: 100-101 Passing Score: 804 Time Limit: 120 min File Version: 1.0 http://www.gratisexam.com/ ICND1 100-101 Practice Exam QUESTION 1 Which three statements
More informationCisco CCNA (ICND1, ICND2) Bootcamp
Cisco CCNA (ICND1, ICND2) Bootcamp Course Duration: 5 Days Course Overview This five-day course covers the essential topics of ICND1 and ICND2 in an intensive Bootcamp format. It teaches students the skills
More informationexam. Number: Passing Score: 800 Time Limit: 120 min CISCO Interconnecting Cisco Networking Devices Part 1 (ICND)
100-105.exam Number: 100-105 Passing Score: 800 Time Limit: 120 min CISCO 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND) Exam A QUESTION 1 Which route source code represents the routing
More informationInterconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview
Interconnecting Cisco Networking Devices Part 1 (ICND1) Course Overview This course will teach students about building a simple network, establishing internet connectivity, managing network device security,
More informationQ&As. Interconnecting Cisco Networking Devices Part 1. Pass Cisco Exam with 100% Guarantee
640-822 Q&As Interconnecting Cisco Networking Devices Part 1 Pass Cisco 640-822 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: 100% Passing Guarantee 100% Money
More informationCCNA 4 - Final Exam (B)
CCNA 4 - Final Exam (B) 1. Identify the factors that contribute to congestion on an Ethernet LAN. (Choose three.) improper placement of enterprise level servers addition of hosts to a physical segment
More informationCCNA. Course Catalog
CCNA Course Catalog 2012-2013 This course is intended for the following audience: Network Administrator Network Engineer Systems Engineer CCNA Exam Candidates Cisco Certified Network Associate (CCNA 640-802)
More information2. Which two functions of the OSI model occur at layer two? (Choose two.) physical addressing encoding routing cabling media access control
1. Which of the following are the address ranges of the private IP addresses? (Choose three.) 10.0.0.0 to 10.255.255.255 200.100.50.0 to 200.100.25.255 150.150.0.0 to 150.150.255.255 172.16.0.0 to 172.31.255.255
More informationOSI Model with Protocols. Layer Name PDU Address Protocols Device
NetEss Name: Networking Essentials Prof. CHIN OSI Model with Protocols Layer Name PDU Address Protocols Device 7 Application Data FTP, SSH, Telnet, SMTP, DNS TFTP,HTTP, POP3, IMAP, HTTPS 6 Presentation
More informationCCNA 1 v5.0 R&S ITN Final Exam 2014
CCNA 1 v5.0 R&S ITN Final Exam 2014 1 Refer to the exhibit. The network administrator enters these commands into the R1 router: R1# copy running-config tftp Address or name of remote host [ ]? When the
More informationCISCO SYSTEM ADMINISTRATION (41)
CISCO SYSTEM ADMININSTRATION PAGE 1 OF 11 CONTESTANT ID# Time Rank CISCO SYSTEM ADMINISTRATION (41) Regional 2012 TOTAL POINTS (500) Failure to adhere to any of the following rules will result in disqualification:
More informationCisco Exam Questions & Answers
Questions & Answers Number: 200-120 Passing Score: 821 Time Limit: 120 min File Version: 28.8 http://www.gratisexam.com/ Questions & Answers Exam Name: CCNA Cisco Certified Network Associate CCNA (803)
More informationInterconnecting Cisco Networking Devices Part1 ( ICND1) Exam.
Cisco 640-822 Interconnecting Cisco Networking Devices Part1 ( ICND1) Exam TYPE: DEMO http://www.examskey.com/640-822.html Examskey Cisco 640-822 exam demo product is here for you to test quality of the
More informationImi :... Data:... Nazwisko:... Stron:...
Imi :.................................................... Data:....................... Nazwisko:............................................... Stron:...................... 1. Which of the following protocols
More informationSYSTEMS ADMINISTRATION USING CISCO (315)
Page 1 of 10 Contestant Number: Time: Rank: SYSTEMS ADMINISTRATION USING CISCO (315) REGIONAL 2014 TOTAL POINTS (500) Failure to adhere to any of the following rules will result in disqualification: 1.
More informationMiPDF.COM. 1. Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below.
CCNA1 v6.0 Pretest Exam Answers 2017 (100%) MiPDF.COM 1. Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below. 11110010 11011011 11110110 11100111* 11100101
More informationEXAM - HP0-Y52. Applying HP FlexNetwork Fundamentals. Buy Full Product.
HP EXAM - HP0-Y52 Applying HP FlexNetwork Fundamentals Buy Full Product http://www.examskey.com/hp0-y52.html Examskey HP HP0-Y52 exam demo product is here for you to test the quality of the product. This
More informationExam : Title : Interconnecting Cisco Networking Devices Part 1. Ver :
Exam : Title : Interconnecting Cisco Networking Devices Part 1 Ver : 11-06-07 QUESTION 1 The junior network support staff provided the diagram as a recommended configuration for the first phase of a four-phase
More informationActual4Test. Actual4test - actual test exam dumps-pass for IT exams
Actual4Test http://www.actual4test.com Actual4test - actual test exam dumps-pass for IT exams Exam : 200-125 Title : CCNA Cisco Certified Network Associate CCNA (v3.0) Vendor : Cisco Version : DEMO Get
More informationInterconnecting Cisco Networking Devices Part 1 ( )
Interconnecting Cisco Networking Devices Part 1 (100-101) Exam Description: The 100-101 Interconnecting Cisco Networking Devices Part 1 (ICND1) is a 1.5- hour exam with 50 60 questions. The 100-101 Interconnecting
More informationSeite von 7 05.0.200 Close Window Assessment System Exam Viewer - CCNA Practice Certification Exam # - (Version 4.0) Below you will find the assessment items as presented on the exam as well as the scoring
More informationScope and Sequence: CCNA Exploration v4.0
Scope and Sequence: CCNA Exploration v4.0 Last Updated August 30, 2007 The course objectives and outline for the final two CCNA Exploration courses, LAN Switching and Wireless and Accessing the WAN, are
More informationCisco Certification Exam
Cisco 640-822 Certification Exam Number: 640-822 Passing Score: 800 Time Limit: 120 min File Version: 55.4 http://www.gratisexam.com/ Cisco 640-822 Certification Exam Exam Name: Interconnecting Cisco Networking
More informationCISCO Certified Network Associate (CCNAX)
CISCO Certified Network Associate (CCNAX) Overview This course is designed to prepare you for the Cisco Certified Network Associate Exam (CCNA) exams. You can choose to take a single composite exam or
More informationTestInside,help you pass any IT exam!
Cisco 640-802 Cisco Certified Network Associate (CCNA) Q&A 192 v13 & v3.21 WEB1: www.56cto.com WEB2: www.ciscoh3com.com Forum: bbs.56cto.com TestInside,help you pass any IT exam! Copyright TestInside reserves
More informationCertified Cisco Networking Associate v1.1 ( )
Certified Cisco Networking Associate v1.1 (640-802) Exam Description: The Cisco Certified Networking Associate v1.1 640-802 is the composite exam that is associated with Cisco CCNA Routing and Switching
More informationTestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE. Modified
TestOut Routing and Switching Pro - English 6.0.x COURSE OUTLINE Modified 2017-07-10 TestOut Routing and Switching Pro Outline- English 6.0.x Videos: 133 (15:42:34) Demonstrations: 78 (7:22:19) Simulations:
More informationCCNA 1 Chapter 6 v5.0 Exam Answers 2013
CCNA 1 Chapter 6 v5.0 Exam Answers 2013 1 After troubleshooting a router, the network administrator wants to save the router configuration so that it will be used automatically the next time that the router
More informationCisco Cisco Certified Network Associate (CCNA)
Cisco 200-125 Cisco Certified Network Associate (CCNA) http://killexams.com/pass4sure/exam-detail/200-125 Question: 769 Refer to exhibit: Which destination addresses will be used by Host A to send data
More informationExam : Title : Cisco Certified Network Associate. Ver :
Exam : 640-802 Title : Cisco Certified Network Associate Ver : 11.07.07 QUESTION 1 What are two reasons that a network administrator would use access lists? (Choose two.) A. to control vty access into
More informationCCNA 1 Chapter 2 v5.0 Exam Answers %
CCNA 1 Chapter 2 v5.0 Exam Answers 2015 100% 1. Which two features are characteristics of flash memory? (Choose two.) Flash provides nonvolatile storage. Flash receives a copy of the IOS from RAM when
More informationCCNA MCQS with Answers Set-1
CCNA MCQS with Answers Set-1 http://freepdf-books.com CCNA MCQS with Answers Set-1 Question 1# - Which of the following are ways to provide login access to a router? (choose all that apply) A. HTTP B.
More informationA few things to keep in mind while completing this activity:
CCNA Routing and Switching Introduction to Networks ITN Practice Skills Assessment Packet Tracer A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close
More informationPass4sures. Latest Exam Guide & Learning Materials
Pass4sures http://www.pass4sures.top/ Latest Exam Guide & Learning Materials Exam : 200-125 Title : CCNA Cisco Certified Network Associate CCNA (v3.0) Vendor : Cisco Version : DEMO Get Latest & Valid 200-125
More informationInterconnecting Cisco Networking Devices Part 1 ICND1
Interconnecting Cisco Networking Devices Part 1 ICND1 Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
More informationThis document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and
This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA Exploration:
More informationet Su cc es s in Passing Yourertification Exam at first
www.dumpspdf.com in Passing Yourertification Exam at first et Su cc es s Vendor: Cisco Exam Code: 200-101 Exam Name: Interconnecting Cisco Networking Devices Part 2 QUESTION: 1 **Exhibit Missing** A technician
More informationCCNA2 Chapter 1 Practice
CCNA2 Chapter 1 Practice Where should a crossover UTP cable be used? (Choose 2) To connect two PCs together directly. To connect a router to an Ethernet switch. To connect a PC to an Ethernet switch. To
More informationCisco.test-inside v by.REBECCA.139q
Cisco.test-inside.100-101.v2013-10-09.by.REBECCA.139q Number: 100-101 Passing Score: 800 Time Limit: 120 min File Version: 12.5 http://www.gratisexam.com/ Exam Code: 100-101 Exam Name: CCNA Interconnecting
More informationCisco_CertiyMe_ _v _264q_By-Bean
Cisco_CertiyMe_640-822_v2011-10-03_264q_By-Bean Number: 640-822 Passing Score: 800 Time Limit: 120 min File Version: 2011-10-03 http://www.gratisexam.com/ Exam - Cisco_Certified_640-822 Version - 2011-10-03
More informationCCNA Actual Test and Module 1, 5, 6 cisco.com
CCNA 640-822 Actual Test and Module 1, 5, 6 cisco.com Number: 640-822 Passing Score: 804 Time Limit: 90 min File Version: 1.0 http://www.gratisexam.com/ 640-822 Interconnecting Cisco Networking Devices
More informationCCNA Semester 2 labs. Labs for chapters 2 10
CCNA Semester 2 labs Labs for chapters 2 10 2.2.2.5 Lab - Configuring IPv4 Static and Default Routes 2.3.2.4 Lab - Troubleshooting Static Routes 3.2.1.9 Lab - Configuring Basic RIPv2 5.2.2.9 Lab - Configuring
More informationCCNA Cisco Certified Network Associate CCNA (v3.0)
CCNA Cisco Certified Network Associate CCNA (v3.0) Cisco 200-125 Dumps Available Here at: /cisco-exam/200-125-dumps.html Enrolling now you will get access to 455 questions in a unique set of 200-125 dumps
More informationTestInside,help you pass any IT exam!
Cisco 640-802 Cisco Certified Network Associate (CCNA) Q&A177 version-12 or v2.21 WEB1: www.56cto.com WEB2: www.ciscoh3com.com Forum: bbs.56cto.com TestInside,help you pass any IT exam! Copyright TestInside
More informationActual4Test. Actual4test - actual test exam dumps-pass for IT exams
Actual4Test http://www.actual4test.com Actual4test - actual test exam dumps-pass for IT exams Exam : 100-105 Title : Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) Vendor : Cisco Version
More informationLab 8.5.2: Troubleshooting Enterprise Networks 2
Lab 8.5.2: Troubleshooting Enterprise Networks 2 Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 192.168.10.1 255.255.255.0 N/A R1 Fa0/1 192.168.11.1 255.255.255.0
More informationCisco Exam CCNA Version: 4.1 [ Total Questions: 215 ]
s@lm@n Cisco Exam 640-801 CCNA Version: 4.1 [ Total Questions: 215 ] Question No : 1 Which router command can be used to verify the type of cable connected to interface serial 0/0? A. show interfaces serial
More informationCCNA Exploration Network Fundamentals
CCNA Exploration 4.0 1. Network Fundamentals The goal of this course is to introduce you to fundamental networking concepts and technologies. These online course materials will assist you in developing
More informationICND1 v2.0 Interconnecting Cisco Networking Devices Part 1 CCENT & Part of CCNA Rout/Switch
ICND1 v2.0 Interconnecting Cisco Networking Devices Part 1 CCENT & Part of CCNA Rout/Switch Course Length: 5 days Course Delivery: Traditional Classroom Online Live Course Overview Interconnecting Cisco
More informationCCNA 1 v5.1 + v6.0 Practice Final Exam Answers 100% Full
Free CCNA Exam Answers 2017 - Study CCNA for free! Free CCNA Study Guide, Tutorials, Labs, Practice Exams. CCNA Online Training and More! http://ccnav6.com CCNA 1 v5.1 + v6.0 Practice Final Exam Answers
More informationLab 1. CLI Navigation. Scenario. Initial Configuration for R1
Lab 1 CLI Navigation This lab covers the most basic skills for accessing and using the command-line interface (CLI) on a Cisco router or switch. Many of the small, picky details of how the CLI works cannot
More informationCCNA 1 Chapter 2 v5.0 Exam Answers 2013
CCNA 1 Chapter 2 v5.0 Exam Answers 2013 1. Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same
More informationSYSTEMS ADMINISTRATION USING CISCO (315)
Page 1 of 11 Contestant Number: Time: Rank: SYSTEMS ADMINISTRATION USING CISCO (315) REGIONAL 2016 Multiple Choice: Multiple Choice (50 @ 10 points each) TOTAL POINTS (500 points) (500 points) Failure
More informationPage 1 of 10 Cisco Discovery - DsmbISP Module 9 Final Exam - V.4 in english. Selectionner un langage : Français Exam mode : Yes (Change the color of the site, white writing on black bottom). Useful links
More informationLab Capturing and Analyzing Network Traffic
Lab 1.2.2 Capturing and Analyzing Network Traffic Host Name IP Address Fa0/0 Subnet Mask IP Address S0/0/0 Subnet Mask Default Gateway RouterA 172.17.0.1 255.255.0.0 192.168.1.1 (DCE) 255.255.255.0 N/A
More informationAnswers to the Do I Know This Already? Quizzes
Appendix C Answers to the Do I Know This Already? Quizzes Chapter 1 1. D and F. Of the remaining answers, Ethernet defines both physical and data link protocols, PPP is a data link protocol, IP is a network
More informationKillTest ᦝ䬺 䬽䭶䭱䮱䮍䭪䎃䎃䎃ᦝ䬺 䬽䭼䯃䮚䮀 㗴 㓸 NZZV ]]] QORRZKYZ PV ٶ瀂䐘މ悹伥濴瀦濮瀃瀆ݕ 濴瀦
KillTest Exam : 100-101 Title : CCNA Interconnecting Cisco Networking Devices 1 (ICND1) Version : Demo 1 / 15 1.Which three statements are true about the operation of a full-duplex Ethernet network? (Choose
More informationCisco EXAM CCNA Cisco Certified Network Associate. Buy Full Product.
Cisco EXAM - 200-120 CCNA Cisco Certified Network Associate Buy Full Product http://www.examskey.com/200-120.html Examskey Cisco 200-120 exam demo product is here for you to test the quality of the product.
More informationCOPYRIGHTED MATERIAL. Table of Contents. Assessment Test
10089.book Page xi Monday, July 23, 2007 3:17 PM Introduction Assessment Test xxiii xxxiii Chapter 1 Internetworking 1 Internetworking Basics 4 Internetworking Models 11 The Layered Approach 12 Advantages
More informationLab 1.3.2: Review of Concepts from Exploration 1 - Challenge
Lab 1.3.2: Review of Concepts from Exploration 1 - Challenge Topology Diagram Learning Objectives Upon completion of this lab, you will be able to: Create a logical topology given network requirements
More informationCCNA Cisco Certified Network Associate CCNA (v3.0)
200-125 - CCNA Cisco Certified Network Associate CCNA (v3.0) 1.What is one benefit of PVST+? A. PVST+ supports Layer 3 load balancing without loops. B. PVST+ reduces the CPU cycles for all the switches
More informationCCNA Boot Camp. Course Description
CCNA Boot Camp Course Description CCNA Boot Camp combines both the Interconnecting Cisco Network Devices Part 1 (ICND1) course and the Interconnecting Cisco Network Devices Part 2 (ICND2) course into one
More informationTestpassport.
Testpassport http://www.testpassport.cn Exam : 640-822 Title : Interconnecting Cisco Networking Devices Part 1 Version : DEMO 1 / 10 1.Which three statements are true about the operation of a full-duplex
More informationCyberPatriot Packet Tracer Tool Kit
CyberPatriot Packet Tracer Tool Kit https://www.uscyberpatriot.org/competition/training-materials/training-modules https://www.netacad.com/ http://www.uscyberpatriot.org/documents/training%20documents/cyberpatriot%20route
More informationCisco.Actualtests v by.CODY.122q. Exam Code: Exam Name: CCNA Interconnecting Cisco Networking Devices 1 (ICND1)
Cisco.Actualtests.100-101.v2014-09-20.by.CODY.122q Number: 100-101 Passing Score: 800 Time Limit: 120 min File Version: 12.5 http://www.gratisexam.com/ Exam Code: 100-101 Exam Name: CCNA Interconnecting
More informationLab 1.4.6B Implementing Port Security
Lab 1.4.6B Implementing Port Security Device Designation Device Name VLAN 1 Address Subnet mask S1 FC-ASW-1 10.0.0.2 255.255.255.0 PC1 Host 1 10.0.0.254 255.255.255.0 PC2 Host 2 10.0.0.253 255.255.255.0
More informationCisco Testinside Exam Bundle
Cisco Testinside 640-802 Exam Bundle Number: 640-802 Passing Score: 950 Time Limit: 120 min File Version: 18.9 http://www.gratisexam.com/ Cisco 640-802 Exam Bundle Exam Name: Cisco Cisco Certified Network
More informationCISCO Cisco Certified Network Associate 229 Q&A. Version 2.83
CISCO 640-802 Cisco Certified Network Associate 229 Q&A Version 2.83 Important Note, Please Read Carefully Other ExamWorx products A) Offline Testing engine Use the offline Testing engine product topractice
More informationNETWORK LAB 2 Configuring Switch Desktop
Configuring Switch 1. Select the switch tab and then add a switch from the list of switches we have to the workspace, we will choose (2950-24) switch. 2. Add a number of PCs next to the switch in order
More information2. What is a characteristic of a contention-based access method?
CCNA 1 Chapter 5 v5.0 Exam Answers 2015 (100%) 1. Which statement is true about MAC addresses? MAC addresses are implemented by software. A NIC only needs a MAC address if connected to a WAN. The first
More informationMobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE
Mobile MOUSe ROUTING AND SWITCHING FUNDAMENTALS ONLINE COURSE OUTLINE COURSE TITLE ROUTING AND SWITCHING FUNDAMENTALS COURSE DURATION 16 Hour(s) of Self-Paced Interactive Training COURSE OVERVIEW In the
More informationCCNA 1 Chapter 5 v5.0 Exam Answers 2013
CCNA 1 Chapter 5 v5.0 Exam Answers 2013 1 2 A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination
More informationExam : Cisco Certified Network Associate(CCNA) Title : Version : DEMO
Exam : 640-802 Title : Cisco Certified Network Associate(CCNA) Version : DEMO 1.Refer to the exhibit. What could be possible causes for the "Serial0/0 is down" interface status? (Choose two.) A. A Layer
More informationLab Troubleshooting Using traceroute Instructor Version 2500
Lab 9.3.4 Troubleshooting Using traceroute Instructor Version 2500 294-833 CCNA 2: Routers and Routing Basics v 3.1 - Lab 9.3.4 Copyright 2003, Cisco Systems, Inc. Objective Use the traceroute Cisco IOS
More informationBefore you start the lab exercises see the lab administrator or EEE3080F tutor to get assigned to your routers.
EEE00F Lab Basics of the Network Lab Student Lab Manual Before you start the lab exercises see the lab administrator or EEE00F tutor to get assigned to your routers. Contents. Resources used in the labs...
More informationLab : Challenge OSPF Configuration Lab. Topology Diagram. Addressing Table. Default Gateway. Device Interface IP Address Subnet Mask
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway Fa0/0 HQ S0/0/0 S0/0/1 Lo1 10.10.10.1 255.255.255.252 Fa0/0 Branch1 S0/0/0 S0/0/1 Fa0/0 Branch2 S0/0/0 S0/0/1 PC1
More informationLab 5.6.2: Challenge RIP Configuration
Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway BRANCH HQ ISP PC1 PC2 PC3 Fa0/0 S0/0/0 Fa0/0 S0/0/0 S0/0/1 Fa0/0 S0/0/1 NIC NIC NIC Learning Objectives Upon completion
More informationObjective: Select the appropriate media, cables, ports, and connectors to connect switches to other network devices and hosts
Curriculum Name CCENT Study Guide 2 Section 9.2 Troubleshooting Layer 1 and Layer 2 Issues As you work through this troubleshooting section, you can review the material necessary to prepare you to obtain
More informationIdentify the features of network and client operating systems (Windows, NetWare, Linux, Mac OS)
Course Outline Network+ Duration: 5 days (30 hours) Learning Objectives: Install and configure a network card Define the concepts of network layers Understand and implement the TCP/IP protocol Install
More informationInterconnecting Cisco Network Devices Part 1 v2.0 (ICND 1)
Interconnecting Cisco Network Devices Part 1 v2.0 (ICND 1) COURSE OVERVIEW: Interconnecting Cisco Networking Devices, Part 1 (ICND1) v2.0 is a five-day, instructor-led training course that teaches learners
More informationIntroduction to Routing and Packet Forwarding
Introduction to Routing and Packet Forwarding Routing Protocols and Concepts 1 Objectives Identify a router as a computer with an OS and hardware designed for the routing process. Demonstrate the ability
More informationCCNA Exam File with Answers. Note: Underlines options are correct answers.
CCNA Exam File with Answers. Note: Underlines options are correct answers. 1. Which of the following are ways to provide login access to a router? (choose all that apply) A. HTTP B. Aux Port /TELNET C.
More informationTCP/IP Protocol Suite and IP Addressing
TCP/IP Protocol Suite and IP Addressing CCNA 1 v3 Module 9 10/11/2005 NESCOT CATC 1 Introduction to TCP/IP U.S. DoD created the TCP/IP model. Provides reliable data transmission to any destination under
More informationIntroducing Cisco Data Center Networking [AT]
Introducing Cisco Data Center Networking [AT] Number: 640-911 Passing Score: 825 Time Limit: 120 min File Version: 1.0 http://www.gratisexam.com/ Cisco 640-911 Introducing Cisco Data Center Networking
More informationChapter 6: Network Layer
Chapter 6: Network Layer CCNA Routing and Switching Introduction to Networks v6.0 Chapter 6 - Sections & Objectives 6.1 Network Layer Protocols Explain how network layer protocols and services support
More informationMiPDF.COM. 3. Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?
CCNA1 v6.0 Chapter 2 Exam Answers 2017 (100%) MiPDF.COM 1. What is the function of the kernel of an operating software? It provides a user interface that allows users to request a specific task. The kernel
More informationLab Using the CLI to Gather Network Device Information Topology
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.1.1 255.255.255.0 N/A Lo0 209.165.200.225 255.255.255.224 N/A S1 VLAN 1 192.168.1.11 255.255.255.0
More informationExamsheets Questions and Answers
640-802 Examsheets Questions and Answers Number: 640-802 Passing Score: 800 Time Limit: 120 min File Version: 17.6 http://www.gratisexam.com/ 640-802 Questions and Answers Exam Name: Cisco Cisco Certified
More informationVendor: Cisco. Exam Code: Exam Name: Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) Version: Demo
Vendor: Cisco Exam Code: 100-105 Exam Name: Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) Version: Demo DEMO QUESTION 1 If the resume command is entered after the sequence that is
More informationCCNA-A Scope and Sequence (March 2007-Draft)
CCNA-A Scope and Sequence (March 2007-Draft) This document is a preliminary overview of the new CCNA-A curriculum and is subject to change since the courses are still under development. The English versions
More informationCCNA Practice test. 2. Which protocol can cause high CPU usage? A. NTP B. WCCP C. Telnet D. SNMP Answer: D
1. Which network would support at least 30 hosts? A. 10.0.0.0 255.255.255.252 B. 10.0.0.0 255.255.255.240 C. 10.0.0.0 255.255.255.224 D. 10.0.0.0 255.255.255.248 2. Which protocol can cause high CPU usage?
More information2. What flavor of Network Address Translation can be used to have one IP address allow many users to connect to the global Internet? A. NAT B.
How long is an IPv6 address? A. 32 bits B. 128 bytes C. 64 bits D. 128 bits Answer: Option D An IPv6 address is 128 bits long. 2. What flavor of Network Address Translation can be used to have one IP address
More informationCCNA 4 - Final Exam (A)
CCNA 4 - Final Exam (A) 1. A network administrator is asked to design a system to allow simultaneous access to the Internet for 250 users. The ISP for this network can only supply five public IPs. What
More informationCOPYRIGHTED MATERIAL. Con t e n t s. Chapter 1 Introduction to Networking 1. Chapter 2 Overview of Networking Components 21.
Con t e n t s Introduction xix Chapter 1 Introduction to Networking 1 Comparing Logical and Physical Networks.... 1 Networking Home Computers........................................... 2 Networking Small
More informationIntroduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies
Introduction p. 1 Self-Assessment p. 9 Networking Fundamentals p. 17 Introduction p. 18 Components and Terms p. 18 Topologies p. 18 LAN Technologies p. 19 Ethernet p. 19 WAN Technologies p. 21 Dedicated
More information