JN3919 LTE Indoor CPE Datasheet (Band38/40/41/42/43)

Transcription

1 JN3919 LTE Indoor CPE Datasheet (Band38/40/41/42/43) Version V1.01 Date

2 Jaton Company will provide customers with comprehensive technical support. Any problem please contact support department directly. Address Website Rm1505,Kuangu Building,68#,Langrong Rd,Shi'ao Village,Dalang Sub-district,New Longhua District,Shenzhen City China Post Code Support Tel Support Fax Support Copyright Reserve all rights. Without going through the company's written permission, no organization or individual have the right to extract and duplicate the content of this document, in whole or in part. Any kind of spreading behavior without approval is prohibited. Trademark statement and other Jaton trademarks are owned by. Other trademarks or registered trademarks mentioned in this document are owned by all of their own Notes: Because of the product version upgrade or other reasons, the content of the document will not be updated on a regular basis. Unless otherwise agreed, this document is used only as a guide, all statements, information and advice in this document do not constitute any express or implied guarantee. 2

3 INDEX 1Hardware Specifications Basic Description ID Design Appearance Index Appearance Interface and Button LED Indicators RF Specifications Environment Specifications Functional Specification SW Specifications Device Management Bridge mode Router Mode NAT Mode WiFi Features Firewall Appendix-Delivers... 12

4 1.1 Basic Description LTE Standard 1Hardware Specifications Spec. Description Comment 3GPP Release 10 CAT4 Host SQN3220 Sequans Flash 32MB SPI NOR Flash Memory 64MB LP-DDR1 SDRAM LTE Chip set SQN3220+SQN3240 Sequans Ethernet LAN Port LED Indicators 1*RJ-45 port 10/100 auto-sensing, auto-mdi/mdix Power/WLAN/WPS/Signal Strength/LAN Indicator 1 LAN Port WLAN/WPS share the same LED Voice POTS port 1*FXS RJ-11 ports Reserved USIM Reset/Reboot Button WPS Button Support 1.8V/3.0V 2FF USIM Tact switch Tact switch Input : Universal range Touch reset functions within 1s completed; long press over 10s to restore the factory settings Power Supply 100~240V AC Output:12V/1.0A DC 1.2 ID Design Appearance Index Index Dimension Weight Color Description 138(H) 140(W) 67(T)mm About 270g White or other customization color

5 1.2.2 Appearance Figure 1-1 JN3919 CPE Appearance Figure 1.3 Interface and Button Connectors Description ETH RJ45 RJ-45 LAN port x 1 USIM Slot Support 1.8V/3.0V USIM Touch reset functions within 1s completed; long press over 10s to Reset/Reboot restore the factory settings Touch the WPS Button within 1s completed, WPS function is enabled; long press over 10s,the CPE enters the Standby mode; WPS In Standby mode, the CPE will quit the Standby mode and run normally if touch the WPS Button within 1s completed.

6 1.4 LED Indicators LED Name Description Color PWR Power Indicator Red WLAN Indicator when WPS button is not pushed WLAN/WPS down WiFi Yellow encryption when WPS button is pushed down Tel Reserved Signal Signal strength strength Blue (4 level) indication LAN ETH Indication Yellow LED Behavior OFF Steady On Blinking OFF Blinking (2 times/sec.) Steady On Blinking (1 times/sec.) OFF One by one signal bar display, four bars Steady On Blinking OFF Status Indicator No Power Supply Power On Standby mode WLAN function disable/standby mode Data transaction through WLAN WLAN function enable WiFi terminal being registered No access in wireless network Displays the current wireless network signal strength, the stronger the signal, the more bars on. Link status Data transaction status No link status/standby mode In addition, four special status indicators (Firmware upgrading, LTE scanning status, reset process and SIM card undetected) and the behavior of Signal strengths is described as follows: Status Indicator Status Description Firmware upgrade The 4 signal strength LED scrolling one by one, interval 250ms LTE scanning status The 4th signal strength LED blinking, interval 250ms Reset process Except 4 signal strength indicator, the other indicator are all on SIM Card Undetected 4 signal strength indicator flash simultaneously, interval 250ms VersionV1.00

7 1.5 RF Specifications No. Feature Capability Comments 1 LTE TDD Support Bands Band 38/40/41/42/43 2 TD-LTE Channel Band Width 5/10/15/20 MHz 3 Output Power@25 23±2 dbm 4 Receiving sensitivity -96dBm/20MHz@QPSK 5 Transmit Power Dynamic Range 63dB 6 LTE Standard 3GPP Release 10 7 Antenna Support Frequency 2500MHz 2700Mhz 3400MHz 3800Mhz 8 LTE Antenna Gain 5dBi built-in antenna 9 Wi-Fi Frequency Ch1~13 10 Wi-Fi Channel BW 20 MHz & 40 MHz G Wi-Fi Antenna Gain 3dBi 2.4G Wi-Fi 1.6 Environment Specifications No. Feature Capability Min Type Max units Comments 1 Operating Temperature <50 without damage 2 Storge Temperature Operating humidity 0 95 % 4 Storge humidity 0 95 % VersionV1.00

8 2Functional Specification 2.1 SW Specifications Item Description Language Settings Basic options: Simple Chinese, English Multiple Languages can be customized. Network mode NAT/Bridge/Router mode Http & Https Support the http or https web server Multiuser support Support two users(admin user and normal user) and different limitation and display Data service Ethernet 10/100Mbps TDD LTE DL 120Mbps UL 30Mbps LAN 100Mbit/s MDI/MDIX auto-sensing IEEE802.3/802.3u is compatible SIM PIN Management, SIM card Authentication Configuration import and export Encryption backup current settings and restore the backup settings Maintenance Export current diagnosis results and operation logs 1 Link Status (LAN) Statistics 2 Transmit / receive traffic in packets 3 Up Time 1 Create, delete, and edit APNs Network connection 2 Set up dial-up connection automatically. setup 3 Set up dial-up connection manual Support VPN pass through VPN Support PPTP tunnel mode Support L2tp, IPsec IP Protocol ipv6/ipv4 dual stack 1 Signal strength 2 Network type Status 3 Network connection status 4 SIM card status 5 Operator name, system mode, and so on Cell lock Control thedevice to be locked on limitedarea around customer home SIM lock Only carrier SIM shall work in the CPE.

9 2.2Device Management Integrity Check Version Rollback Software Upgrade HTTP/FTP Auto Upgrade Configuration backup TR069 Image One Version Image One Checksum Image Two Version Image Two Checksum Auto Rollback to previous version when upgrade fail Full image upgrade Firmware upgrade manually Enable / Disable Upgrade Firmware Upgrade URL Version file Check new firmware every (hr.: 1~744) Start Time Random Time Configuration Supports upload / download the ACS specified file; Support download CPE configuration file Support queries following parameters: PCI / RSRP / RSRQ / SINR / Transmit power / DL Packet Error Rate (PER) / MCS Data rate in downlink and uplink / MIMO mode in progress Support configure the following parameters: Wan Configuration: Operation Mode, WAN Protocol, Get IP Method, WAN IP Address, WAN IP Subnet Mask, MTU; DHCP Server Configuration: DHCP Mode, Start IP, End IP, Lease Time, Relay IP DMZ configuration: DMZ Host; Support remote upgrade: Support batch or for individual CPE remote version upgrade and rollback operations; Support CPE version update Port mirror Syslog Diagnostics Supports debugging operations: reboot, restore factory settings, remote PING bag, burn and change ACL address Support cycle monitor: According to the server instructions, periodically reporting corresponding parameters: including device performance(data rate in downlink and uplink, DL Packet Error Rate (PER), MCS, MIMO mode, etc.) and RF parameters (PCI, RSRP, RSRQ, SINR, Transmit power, etc.) Can enable or disable the port mirror function Support the syslog function can send the log to the PC via LAN. Support the Ping and trace route

10 2.3 Bridge mode Item Data traffic forward Maximum 4 PCs support Module can be managed Public IP allocation Multiple APN Description Forward the data traffic between the LTE network and PCs. Each PC connect to the LTE public network via one APN One APN can be allocation for the module and the module can be managed via TR069 such remote update version PC get the public IP dynamic from the DHCP server in the CPE. The IP is public CPE get from LTE network. Up to 4 APNs support, and can set the static router for each APN 2.4 Router Mode Item LAN WAN Router protocol DNS Multiple APN Description Can be set 2 IP addresses on the LAN and for 2 different Network. WAN IP can be set dynamic or static. Not support current Can be set Up to 4 APNs support, and can set the static router for each APN 2.5 NAT Mode Item NAT Firewall Multiple APN DMZ DHCP server DNS Description Support NAT function Can enable or disable the firewall Up to 4 APNs support, and can set the static router for each APN The DMZ can be set. Support the DHCP server Support the auto DNS or manual DNS configuration

11 2.6WiFi Features WiFi Features Users can switch WLAN function through two ways, one is touch the WLAN button, the second is Web UI. Support configuration WLAN functions through Web UI, include: SSID, SSID broadcasting turn on/off, AP Isolate function, Channel, rate and mode Support encryption: Un-encrypted, WEP-OPEN, WEP-SHARED, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES) Support WPS: Support PBC mode WiFi protocol support: IEEE b/g/n ( GHz) WiFi support max. users: 32 Support SSID broadcasting Support WiFi channel self-adapt and select Support WDS 2.7 Firewall Firewall Configuration IP Filter MAC Filter URL Filter UPnP Port forwarding Access Restriction Enable Firewall Allow Ping from WAN Allow HTTPs login from WAN HTTPs Login Port from WAN DMZ IP Address Redirect ICMP to the Host Support the IP filter Support the MAC Filter Support the URL Filter Support UPnP Support the Port forwarding Name Enable Blocked Day / Blocked Time Blocked Device Blocked Reason

12 3Appendix-Delivers Article Number Content Comments - 1*Assembled product Detail Delivers need to be - 1*Ethernet cable, 1M defined by customer - 1*12V/1A or 1A AC agreement adapter (Wall Mount) - 1*Manual