CSCD 433/533 Advanced Networks Fall Lecture 14 RTSP and Transport Protocols/ RTP

Transcription

1 CSCD 433/533 Advanced Networks Fall 2012 Lecture 14 RTSP and Transport Protocols/ RTP 1

2 Topics Multimedia Player RTSP Review RTP Real Time Protocol Requirements for RTP RTP Details Applications that use RTP 2

3 Multimedia Player Four things 1.Manage User Interface 2.Handle Transmission 3.Decompress Content 4.Eliminate Jitter

4 Multimedia Player 1. Manage User Interface Provide buttons for Interaction Uses Protocol with built-in support for users Look and feel of remote control Allows users to interact with media Makes it look attractive, cute, cool

5 Multimedia Player 2. Handle Transmission If using TCP, no lost packets But likely will add jitter Retransmit packets not always appropriate If using UDP, lost packets Lost in small bursts Must plan for this in advance Will depend on type of application, stored vs. live

6 Multimedia Player 2. Handle Transmission How does the live or streaming application handle missing packets? Depends on Streaming vs. Live Streaming (stored) Delay start time even more Use a larger buffer Streaming - Player, might pause Player might pause - annoying to users! Live Packet will be skipped Sounds and video can often mask missing packets How do they do it?

7 Multimedia Player 2. Missed Packets Two Strategies 1. Forward Error Correction Send extra data, parity packet Group of 5 packets, 1 is parity Lost one, then XOR of other 4 to get 5 th packet Disadvantage, must send extra packet no matter what 2. Interleaving Mix up packets before sending Unmix packets at receiver Spreads out loss over time Won't notice it as much... few lost packets intermixed vs. one missing burst of packets

8 Recovering from packet loss Interleaving Divide 20 msec of audio data into smaller units of 5 msec each and interleave Upon loss, have a set of partially filled chunks

9 Multimedia Player 3. Decompress Stream Must account for many compression schemes MPEG, H.261, MP3, G.729 etc. Underlying protocols help by supporting multiple formats RTP, Being flexible 4. Eliminate Jitter How do players handle that?

10 Handling Jitter Packets created at a steady rate Due to network delays packets arrive at variable times Delay playback and buffer packets before playback Smoothing the output stream by buffering packets

11 Protocols for Multimedia Supporting Multimedia requires many protocols Multiple protocols... not just one! Multiple network layers contribute to multimedia functioning over the Internet

12 Interaction of Multimedia Protocols Network layer protocols Provide basic network service support such as addressing IP, network protocol Transport protocols, Provide end-to-end transport functions for streaming applications Includes UDP, TCP, RTP, RTCP Session-control protocols, Application layer Define messages to control delivery of multimedia data during an established session Examples are RTSP and Session Initiation Protocol(SIP)

13 Protocol stack for multimedia services RTSP RTP RTCP TCP (till now)

14 Real Time Streaming Protocol

15 Review of RTSP Recall... RTSP Establishes and controls Either one or several time-synchronized streams of media such as audio and video RTSP Acts as a "network remote control" for multimedia servers Provides a framework to enable controlled, on-demand delivery of real-time data

16 RTSP Session Default port 554 RTSP server get UDP port data source media server RTSP SETUP RTSP OK RTSP PLAY RTSP OK RTSP TEARDOWN RTSP OK RTP VIDEO RTP AUDIO RTCP TCP UDP RTSP client choose UDP port AV subsystem media player

17 RTSP Operation 1. Sends a control request Client constructs the request Method, request URL, and protocol version number Client includes a general header, a request header, and possibly an entity header (like HTTP protocol) 2. Server executes request if possible 3. Server returns a response containing a status-line and general response and entity headers Status-line: Protocol version, numeric status code, textual description 17

18 RTSP Operation (cont.) Media streams are left unspecified Could be RTP streams or any other form of media transmission RTSP only specifies control Client and server software must maintain mapping between control channel and media streams Control request and responses may be sent via TCP or UDP Are sequenced UDP requires construction of retransmission mechanisms Mostly uses TCP 18

19 RTSP Methods Major methods SETUP: Server allocates resources for a stream and starts an RTSP session PLAY: Starts data tx on a stream PAUSE: Temporarily halts a stream TEARDOWN: Free resources of the stream Additional methods OPTIONS: Get available methods ANNOUNCE: Change description of media object DESCRIBE: Get low level descr. of media object RECORD: Server starts recording a stream REDIRECT: Redirect client to new server SET_PARAMETER: Device or encoding control

20 Example:Media on demand (Unicast) Media server A audio.example.com Media server V video.example.com Client C Web server W Holds the media descriptors

21 RTSP Message sequence C -> W : GET/Twister.sdp HTTP/1.1 Host: Accept: application/sdp W-> C : HTTP/ OK Content-Type: application/sdp C-> A : SETUP rtsp://audio.example.com/twister/audio.en RTSP/1.0 Cseq:1 Transport : RTP/AVP/UDP;unicast;client_port= A-> C : RTSP/ OK Cseq:1 Session: Transport : RTP/AVP/UDP;unicast;client_port= server_port= C Web Server W V A Media Servers C->V : SETUP rtsp://video.example.com/twister/video.en RTSP/1.0 Cseq:1 Transport : RTP/AVP/UDP;unicast;client_port= A-> C : RTSP/ OK Cseq:1 Session: Transport : RTP/AVP/UDP;unicast;client_port= server_port=

22 RTSP Message sequence (contd.) C->V: PLAY rtsp://video.example.com/twister/video RTSP/1.0 Cseq: 2 Session: W V->C: RTSP/ OK Cseq: 2 Session: RTP-Info: url=rtsp://video.example.com/twister/video; seq= ; C->A: PLAY rtsp://audio.example.com/twister/audio.en RTSP/1.0 Cseq: 2 Session: C A V A->C: RTSP/ OK Cseq: 2 Session: RTP-Info: url=rtsp://audio.example.com/twister/audio.en; seq=876655;

23 RTSP Message sequence (contd.) C->A: TEARDOWN rtsp://audio.example.com/twister/audio.en RTSP/1.0 Cseq: 3 Session: A->C: RTSP/ OK Cseq: 3 W V C->V: TEARDOWN rtsp://video.example.com/twister/video RTSP/1.0 Cseq: 3 Session: C A V->C: RTSP/ OK Cseq: 3

24 Real-time Protocol (RTP)

25 RTP Overview One of those confusing protocols Application protocol but performs transport functions Design Goal Support a range of multimedia formats Examples: H.264, MPEG-4, MJPEG, MPEG, etc Allow new formats to be added without revising RTP standard Main purpose Multiplex several multimedia streams onto single stream of UDP packets

26 RTP Overview What does it do? Provides end-to-end delivery service for real-time data, in unicast and multicast sessions Offers synchronization services Timestamping Packet identification and loss detection, sequence numbering and Delivery monitoring/feedback (through RTCP)

27 RTP Overview What doesn't it do? Does not provide in-order and reliable delivery of packets Does not provide timely delivery of packets Does not ensure QoS guarantees Independent of the transport protocol TCP, UDP RTP/RTCP are usually implemented within applications

28 RTP Overview Contains information so receivers can work with multimedia information 1. Packets are numbered 1,2,3,4,... Why do you need that? If packets are missing, application deals with it Video - just skip that frame Audio - Maybe interpolate the values Can't retransmit - would arrive too late RTP - has no ACK's and no mechanism to request retransmission

29 RTP Overview Contains information so receivers can work with multimedia information 2. Packets are time-stamped 12:34:65 Why do you need that? Used to enable receiver to play back received samples at appropriate intervals When several media streams are present, timestamps are independent in each stream Could be used to synchronize streams Timestamps in RTP packets tied to video and audio sampling clocks Not tied to the wall-clock time!

30 RTP Overview Contains information so receivers can work with multimedia information 3. Packets have a payload type identifier Why do you need that? Indicates format of payload and determines its interpretation by application Since RTP supports multiple formats for video and audio, Must tell recipient expected format

31 RTP and RTCP Actually, two proposed protocols RTP and RTCP Used together Real Time Protocol and Real Time Control Protocol Pair of protocols developed by IETF 1990's RTP Deals with sending data RTCP Used to send control information associated with a given data flow More about RTCP later... 31

32 RTP runs on top of UDP RTP usually implemented as part of the application, libraries or direct support RTP libraries provide a transport-layer interface that extends UDP Adds Payload type identification Packet sequence numbering Time-stamping

33 RTP Example Sending 64 kbps PCM-encoded voice over RTP PCM = Pulse Code Modulation 1. Application collects encoded data in chunks, e.g., every 20 msec = 160 bytes in a chunk 2. Audio chunk along with RTP header forms RTP packet 3. Which is then encapsulated into a UDP segment

34 IP Header UDP Header RTP Header RTP Video Payload IP Header UDP Header RTP Header RTP Audio Payload Video and audio payloads are sent separately Uses sequence number to synchronize audio and video once received

35 Application Level Framing (ALF) Two Key Ideas used in RTP Paper by Clark and Tennenhouse, MIT, 1990 Application Level Framing (ALF) Integrated Layer Processing

36 Application Level Framing Idea is Application should break data into aggregates that are meaningful to the application Called Application Data Units (ADU's) Frame boundaries are then preserved by lower level protocols And then send along enough information for reconstruction at the receiver end Timestamps and numbering will allow receiver to put back together a meaningful packet stream

37 Integrated Layer Processing Data processing is not separated into strict network layers All processing of one complete ADU can be done in one integrated processing step Within the application!!!! Use libraries to implement protocol within application Engineering principle is called Integrated Layer Processing

38 RTP Packets Formats 38

39 RTP Header V, P, X, CC, M V - version, currently = 2 P - padding, 1-bit, If set, packet has one or more padding bytes. Last byte in payload is count of padding bytes X - extension header, 1-bit, If set, a single header extension follows fixed header. Designed for experimental additions to RTP. 39

40 RTP Header 32bits V, P, X, CC, M Payload Type (7 bits): Indicates type of encoding Sender can change encoding in middle of conference, and sender informs receiver through this payload type field Payload type 0: PCM mu-law, 64 kbps Payload type 3, GSM, 13 kbps Payload type 7, LPC, 2.4 kbps Payload type 26, Motion JPEG Payload type 31. H.261 Payload type 33, MPEG2 video Packet Sequence Number (16 bits): Increments by one for each RTP packet sent, and may be used to detect packet loss and to restore packet sequence

41 RTP Header Continued Timestamp field - Reflects the sampling instant of the first byte in the RTP data packet Used to remove jitter introduced by the network SSRC field - Identifies the source of the RTP stream An id for the source of a stream. Used to multiplex several streams onto single UDP stream

42 RTP Basics of Data Transmission RTP PDUs

43 Real-Time Control Protocol (RTCP) Works in conjunction with RTP Each RTP session participant periodically transmits RTCP control packets to all other participants Each RTCP packet contains sender and/or receiver reports Report statistics useful to running application Statistics include number of packets sent, number of packets lost, interarrival jitter, etc. Feedback can be used to control performance Important point is Sender may modify its transmissions based on feedback!!

44 RTP Control Protocol (RTCP) RTCP specifies report packets exchanged between sources and destinations of multimedia information Receiver reception report Sender report Source description report Reports contain statistics such as the number of RTP-packets sent, number of RTP-packets lost, inter-arrival jitter Used by application to modify sender transmission rates and for diagnostics purposes

45 RTCP Example Receiver Reports contain this information

46 References Clark and Tennehouse ALF Article Architectural Considerations for a New Generation of Protocols'' in Proceedings of the SIGCOMM '90 Symposium on Communications Architectures, September 1990, Computer Communications Review doi= &rep=rep1&type=pdf FAQ on RTP RTP Overview - Nice RTSP Overview - Good Summary

47 Summary TCP/UDP good for regular applications with no timing requirements However, one size doesn t always fit all RTP and real-time protocols good for multimedia applications that need Timely delivery of data Allows for data coding in different ways Allows the applications to decide on packet coding to optimize it s packet delivery Other protocols have developed RTMP and others

48 New Assignment Streaming Media Player Read: RTP in Chapter 6 48