Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8
|
|
- Julia Doyle
- 5 years ago
- Views:
Transcription
1 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 Part No: E August 2015
2 Copyright 2015, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable: U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle. Documentation Accessibility For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at Access to Oracle Support Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit or visit if you are hearing impaired. Copyright 2015, Oracle et/ou ses affiliés. Tous droits réservés. Ce logiciel et la documentation qui l'accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des restrictions d'utilisation et de divulgation. Sauf stipulation expresse de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire, diffuser, modifier, breveter, transmettre, distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à des fins d'interopérabilité avec des logiciels tiers ou tel que prescrit par la loi. Les informations fournies dans ce document sont susceptibles de modification sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu'elles soient exemptes d'erreurs et vous invite, le cas échéant, à lui en faire part par écrit. Si ce logiciel, ou la documentation qui l'accompagne, est concédé sous licence au Gouvernement des Etats-Unis, ou à toute entité qui délivre la licence de ce logiciel ou l'utilise pour le compte du Gouvernement des Etats-Unis, la notice suivante s'applique: U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government. Ce logiciel ou matériel a été développé pour un usage général dans le cadre d'applications de gestion des informations. Ce logiciel ou matériel n'est pas conçu ni n'est destiné à être utilisé dans des applications à risque, notamment dans des applications pouvant causer des dommages corporels. Si vous utilisez ce logiciel ou matériel dans le cadre d'applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans des conditions optimales de sécurité. Oracle Corporation et ses affiliés déclinent toute responsabilité quant aux dommages causés par l'utilisation de ce logiciel ou matériel pour ce type d'applications. Oracle et Java sont des marques déposées d'oracle Corporation et/ou de ses affiliés. Tout autre nom mentionné peut correspondre à des marques appartenant à d'autres propriétaires qu'oracle. Intel et Intel Xeon sont des marques ou des marques déposées d'intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des marques ou des marques déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques déposées d'advanced Micro Devices. UNIX est une marque déposée d'the Open Group. Ce logiciel ou matériel et la documentation qui l'accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et des services émanant de tiers. Oracle Corporation et ses affiliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou services émanant de tiers, sauf mention contraire stipulée dans un contrat entre vous et Oracle. En aucun cas, Oracle Corporation et ses affiliés ne sauraient être tenus pour responsables des pertes subies, des coûts occasionnés ou des dommages causés par l'accès à des contenus, produits ou services tiers, ou à leur utilisation, sauf mention contraire stipulée dans un contrat entre vous et Oracle. Accessibilité de la documentation Pour plus d'informations sur l'engagement d'oracle pour l'accessibilité à la documentation, visitez le site Web Oracle Accessibility Program, à l'adresse Accès au support électronique Les clients Oracle qui ont souscrit un contrat de support ont accès au support électronique via My Oracle Support. Pour plus d'informations, visitez le site ou le site si vous êtes malentendant..
3 Contents Using This Documentation ACL aclcmd ip access-list mac access-list extended ipv6 access-list extended permit deny permit- ip/ospf/pim/protocol type deny - ip/ospf/pim/protocol type permit tcp deny tcp permit udp deny udp permit icmp deny icmp ip access-group mac access-group ipv6 access-group permit - MAC deny - MAC show access-lists permit- ospf/pim/protocol type ipv deny- ospf/pim/protocol type ipv permit tcp ipv deny- tcp ipv permit udp ipv deny udp ipv permit icmp ipv deny icmp ipv aclmet ip access-list mac access-list extended permit - standard mode deny - standard mode
4 permit- ip/ospf/pim/protocol type deny - ip/ospf/pim/protocol type permit tcp deny tcp permit udp deny udp permit icmp deny icmp ip access-group mac access-group permit deny show access-lists QoSX shutdown qos qos priority-map class-map meter policy-map queue-type shape-template scheduler queue queue-map sched-hierarchy qos interface map match access-group set class meter-type set policy set meter set algo-type random-detect dp show qos global info show priority-map Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
5 48.24 show class-map show class-to-priority-map show meter show policy-map show queue-template show shape-template show scheduler show queue show queue-map show sched-hierarchy show qos pbit-preference-over-dscp show qos def-user-priority show qos meter-stats show qos queue-stats debug qos qos pbit-preference cpu rate limit queue show cpu rate limit mls qos mls qos aggregate-policer
6 Using This Documentation Overview Provides information on Oracle s SEFOS CLI commands Audience Users and system administrators who configure SEFOS through the CLI Required knowledge Basic knowledge of UNIX CLI command syntax Product Documentation Library Documentation and resources for this product and related products are available at Acronyms Refer to the Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 1 for acronyms and abbreviations. CLI Command Modes Refer to the Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 1 for CLI command modes. Feedback Provide feedback about this documentation at 6
7 7
8
9 CHAPTER 47 ACL ACLs on the system perform both access control and Layer 3 field classification. 9
10 47.1 aclcmd CLI commands in this Fulcrum sub-category are listed below: ip access-list mac access-list extended ipv6 access-list extended permit deny permit- ip/ospf/pim/protocol type deny - ip/ospf/pim/protocol type permit tcp deny tcp permit udp deny udp permit icmp deny icmp ip access-group mac access-group ipv6 access-group permit - MAC deny - MAC show access-lists permit- ospf/pim/protocol type ipv6 deny- ospf/pim/protocol type ipv6 permit tcp ipv6 deny- tcp ipv6 permit udp ipv6 deny udp ipv6 permit icmp ipv6 deny icmp ipv6 10 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
11 ip access-list Command Objective This command creates IP access-list and enters the IP access-list configuration mode. ACLs on the system perform both access control and Layer 3 field classification. To define Layer 3 fields access-lists the ip access-list command is used. The no form of the command deletes the IP access-list. Syntax ip access-list {standard <access-list-number (1-10)> extended <access-list-number ( )> } no ip access-list {standard <access-list-number (1-10> extended <access-list-number ( )> } Parameter Description standard <access-list-number (1-10)> - Configures the standard access-list number. Standard access-lists create filters based on IP address and network mask (L3 filters). This value ranges from 1 to 10. Mode Package extended <access-list-number ( )> - Configures the extended access-list number. Extended access-lists enable specification of filters based on the type of protocol, range of TCP or UDP ports, as well as the IP address and network mask (L4 filters). This value ranges between 11 and Global Configuration Mode Workgroup, Enterprise, Metro_E, and Metro Example SEFOS (config)# ip access-list standard 1 SEFOS (config-std-nacl)# Related Command(s) permit - Specifies the packets to be forwarded depending upon the associated parameters. deny - Denies traffic if the conditions defined in the deny statement are matched. Permit Permits the packets to be forwarded depending upon the associated parameters. Deny - Denies the packets to be forwarded depending upon the associated parameters. permit- ip/ospf/pim/protocol type - Allows traffic for a particular protocol packet if the conditions defined in the permit statement are matched. Chapter 47 ACL 11
12 permit ipv6 - Specifies IP packets to be forwarded based on protocol and associated parameters. deny - ip/ospf/pim/protocol type- Denies traffic for a particular protocol packet if the conditions defined in the deny statement are matched. deny ipv6 - Specifies IPv6 packets to be rejected based on protocol and associated parameters. permit tcp - Specifies the TCP packets to be forwarded based on the associated parameters. deny tcp - Specifies the TCP packets to be rejected based on the associated parameters. permit udp - Specifies the UDP packets to be forwarded based on the associated parameters. deny udp - Specifies the UDP packets to be rejected based on the associated parameters. permit icmp - Specifies the ICMP packets to be forwarded based on the IP address and the associated parameters deny icmp - Specifies the ICMP packets to be rejected based on the IP address and associated parameters. ip access-group - Enables access control for the packets on the interface. show access-lists - Displays the access-list configuration. 12 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
13 mac access-list extended Command Objective This command creates a MAC access-list and enters the MAC access-list configuration mode. This value ranges from 1 to The no form of the command deletes the MAC access-list. Syntax mac access-list extended <access-list-number (1-1024)> no mac access-list extended <short (1-1024)> Mode Package Global Configuration Mode Workgroup, Enterprise, Metro_E, and Metro Example SEFOS (config)# mac access-list extended 5 SEFOS (config-ext-macl) Related Command(s) mac access-group - Applies a MAC access control list (ACL) to a Layer 2 interface. permit - MAC - Specifies the packets to be forwarded based on the MAC address and the associated parameters. deny - MAC - Specifies the packets to be rejected based on the MAC address and the associated parameters. show access-lists - Displays the access lists configuration. Chapter 47 ACL 13
14 ipv6 access-list extended Command Objective This command creates IPv6 access-list and enters the IPv6 access-list configuration mode. This value ranges from 11 to 1024 The no form of the command deletes the IPv6 access-list. Syntax ipv6 access-list extended <access-list-number ( )> no ipv6 access-list extended <access-list-number ( )> Mode Package Global Configuration Mode Workgroup, Enterprise, Metro_E, and Metro Example SEFOS (config)# ipv6 access-list extended 15 SEFOS (config-ipv6-acl)# 14 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
15 permit Command Objective Syntax This command permits the packets to be forwarded depending upon the associated parameters. Standard IP access lists use source addresses for matching operations. permit { any host <src-ip-address> <src-ip-address> <mask> } { any host <dest-ip-address> <dest-ip-address> <mask> } Parameter Description any host <src-ip-address> < src-ip-address> <mask> - Permits traffic with the specified source address. The sources are: any - Permits packets from any source. host <src-ip-address> - Permits packets with the specified host source IPv4 address. < src-ip-address > <mask> - Permits packets with the specified source IP address and the network mask to be used with the source IP address. Mode Package Example Related Command(s) any host <dest-ip-address> < dest-ip-address > <mask> - Permits traffic with the specified destination address. The destination can be: any - Permits the packets with any destination. host <dest-ip-address> - Permits packets with the specified host destination IPv4 address. < dest-ip-address > <mask> - Permits packets with the specified destination IP address and the network mask for the given source IP address. IP ACL Configuration (standard) Workgroup, Enterprise, Metro_E, and Metro SEFOS(config-std-nacl)# permit host host ip access-list - Creates IP access list and enters the IP access list configuration mode. show access-lists - Displays the access list configuration. Chapter 47 ACL 15
16 deny Command Objective Syntax This command denies and discards packets depending upon the associated parameters. Standard IP access lists use source addresses for matching operations. deny{ any host <src-ip-address> <src-ip-address> <mask> } { any host <dest-ip-address> <dest-ip-address> <mask> } Parameter Description any host <src-ip-address> < src-ip-address ><mask> - Denies traffic with the specified source address. The sources are: any - Denies packets from any source. host <src-ip-address> - Denies packets with the specified host source IPv4 address. < src-ip-address> <mask> - Denies packets with the specified source IP addressand the network mask to be used with the source IP address. Mode Package Example Related Command(s) any host <dest-ip-address> < dest-ip-address > <mask> - Denies traffic with the specified destination address. The destination can be: any - Denies the packets with any destination. host <dest-ip-address> - Denies packets with the specified host destination IPv4 address. < dest-ip-address> <mask> - Denies packets with the specified destination IP address and the network mask for the given destination IP address. IP ACL Configuration (standard) Workgroup, Enterprise, Metro_E, and Metro SEFOS(config-std-nacl)# deny host any ip access-list - Creates IP access list and enters the IP access list configuration mode. show access-lists - Displays the access list configuration. 16 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
17 permit- ip/ospf/pim/protocol type Command Objective This command permits data packets for a particular protocol packet if the conditions defined in the permit statement are matched. Syntax permit { ip ospf pim <protocol-type (1-255)>}{ any host <src-ip-address> <src-ip-address> <mask> }{ any host <dest-ip-address> <dest-ip-address> <mask> }[ {tos{max-reliability max-throughput min-delay normal <value (0-7)>} dscp {<value (0-63)> af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 cs1 cs2 cs3 cs4 cs5 cs6 cs7 default ef}} ][priority <value (1-7)>] [{precedence (0-7)> fragments log log-input reflect <access list> time-range <value>}] Parameter Description ip - Allows IP protocol packets. ospf - Allows OSPF protocol packets. pim - Allows PIM protocol packets. <protocol-type (1-255)> - Configures the type of protocol to be checked against the packet. It can also be a protocol number. Note: Protocol type with the value 255 indicates that protocol can be anything and it will not be checked against the action to be performed. any host <src-ip-address> < src-ip-address> <mask> - Permits traffic with the specified source address. The sources are: any - Permits packets from any source. host <src-ip-address> - Permits packets with the specified host source IPv4 address. <src-ip-address> <mask> - Permits packets with the specified source IP address and the network mask to be used with the source IP address. any host <dest-ip-address> < dest-ip-address > <mask> - Permits traffic with the specified destination address. The destination can be: any - Permits the packets with any destination. host <dest-ip-address> - Permits packets with the specified host destination IPv4 address. <dest-ip-address> <mask> - Permits packets with the specified destination IP address and the network mask for the given destination IP address. Chapter 47 ACL 17
18 tos - Allows the protocol packets based on the following types of service configurations. The options are, max-reliability - Allows the protocol packets having TOS field set as high reliability. max-throughput - Allows the protocol packets having TOS field set as high throughput. min-delay - Allows the protocol packets having TOS field set as low delay. normal - Allows all protocol packets. Does not check for the TOS field in the packets. <value (0-7)> - Allows the protocol packets based on the TOS value set. This value ranges from 0 to 7. This value represents different combination of TOS. 0 - Allows all protocol packets. Does not check for the TOS field in the packets. 1 - Allows the protocol packets having TOS field set as high reliability. 2 - Allows the protocol packets having TOS field set as high throughput. 3 - Allows the protocol packets having TOS field set either as high reliability or high throughput. 4 - Allows the protocol packets having TOS field set as low delay. 5 - Allows the protocol packets having TOS field set either as low delay or high reliability. 6 - Allows the protocol packets having TOS field set either as low delay or high throughput. 7 - Allows the protocol packets having TOS field set either as low delay, high reliability, or high throughput. dscp Configures the Differentiated Services Code Point (DSCP) which provides the quality of service control. The various options available are: <value (0-63)> Configures the Differentiated Services Code Point value. This value ranges from 0 to 63. af11 - Matches packets with AF11 DSCP (001010). af12 - Matches packets with AF12 DSCP (001100). af13 - Matches packets with AF13 DSCP (001110). af21 - Matches packets with AF21 DSCP (010010). af22 - Matches packets with AF22 DSCP (010100). af23 - Matches packets with AF23 DSCP (010110). af31 - Matches packets with AF31 DSCP (011010). af32 - Matches packets with AF32 DSCP (011100). af33 - Matches packets with AF33 DSCP (011110). af41 - Matches packets with AF41 DSCP (100010). af42 - Matches packets with AF42 DSCP (100100). 18 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
19 af43 - Matches packets with AF43 DSCP (100110). cs1 - Matches packets with CS1 (precedence 1) DSCP (001000). cs2 - Matches packets with CS2 (precedence 2) DSCP (010000). cs3 - Matches packets with CS3 (precedence 3) DSCP (011000). cs4 - Matches packets with CS4 (precedence 4) DSCP (100000). cs5 - Matches packets with CS5 (precedence 5) DSCP (101000). cs6 - Matches packets with CS6 (precedence 6) DSCP (110000). cs7 - Matches packets with CS7 (precedence 7) DSCP (111000). default - Default DSCP (000000). ef - Matches packets with EF DSCP (101110). priority <(1-7)> Configures the priority value of the L3 filter to be used when the packet matches more than one filter rule. Higher value of filter priority implies a higher priority. This value ranges from 1 to 7. <precedence (0-7)> - Precedence level to be used for filtering packets. This parameter is newly added in the existing command for industry standard CLI. The values are: 0 - Matches packets with routine precedence. 1 - Matches packets with priority precedence. 2 - Matches packets with immediate precedence. 3 - Matches packets with flash precedence. 4 - Matches packets with flash override precedence. 5 - Matches packets with critical precedence. 6 - Matches packets with internetwork control precedence. 7 - Matches packets with network control precedence. fragments - Considers fragments in the access list entry and examines non-initial fragments of IPv4 packets, when applying the access list entry. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. log - Creates informational logging message about the packets that match the entry to be sent to the console. This message includes the access list number, whether the packet is permitted or denied, the protocol, whether the protocol is TCP (Transport Control Protocol), UDP (User Datagram Protocol), ICMP (Internet Control Message Protocol) or a number, and, if appropriate, the source and destination addresses and source and destination port numbers. This message is generated for the first packet that matches a flow. This message is then generated at five minute intervals with the number of packets permitted or denied in the prior five minute interval. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. Chapter 47 ACL 19
20 log-input - Creates information logging message along with the information about the input interface. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. reflect <access-list> Reflects the name of the reflexive access list. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. time-range <value> - Applies the time range. Time range defines the time when the permit or deny statements of the access control list are in effect. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. Mode Package Defaults ACL Extended Access List Configuration Mode Workgroup, Enterprise, Metro_E, and Metro protocol-type priority - 1 Note: dscp - -1 Protocol type with the value 255 indicates that protocol can be anything and it will not be checked against the action to be performed. Example Related Command(s) SEFOS (config-ext-nacl)# permit any dscp af11 ip access-list - Creates IP ACLs and enters the IP access list configuration mode. deny - ip/ospf/pim/protocol type - Denies traffic for a particular protocol packet if the conditions defined in the deny statement are matched. show access-lists - Displays the access list configuration. 20 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
21 deny - ip/ospf/pim/protocol type Command Objective This command denies traffic for a particular protocol packet if the conditions defined in the deny statement are matched. Syntax deny { ip ospf pim <protocol-type (1-255)>}{ any host <src-ip-address> <src-ip-address> <mask> }{ any host <dest-ip-address> <dest-ip-address> <mask> }[ {tos{max-reliability max-throughput min-delay normal <value (0-7)>} dscp {<value (0-63)> af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 cs1 cs2 cs3 cs4 cs5 cs6 cs7 default ef}} ][priority <value (1-7)>] [{precedence (0-7)> fragments log log-input reflect <access list> time-range <value>}] Parameter Description ip - Denies P protocol packets. ospf - Denies OSPF protocol packets. pim - Denies PIM protocol packets. <protocol-type (1-255)> - Denies the packets for the specified protocol number. This value ranges from 1 to 255. Note: Protocol type with the value 255 indicates that protocol can be anything and it will not be checked against the action to be performed. any host <src-ip-address> < src-ip-address> <mask> - Denies traffic with the specified source address. The sources are: any - Denies packets from any source. host <src-ip-address> - Denies packets with the specified host source IPv4 address. <src-ip-address> <mask> - Denies packets with the specified source IP address and the network mask to be used with the source IP address. any host <dest-ip-address> < dest-ip-address > <mask> - Denies traffic with the specified destination address. The destination can be: any - Denies the packets with any destination. host <dest-ip-address> - Denies packets with the specified host destination IPv4 address. <dest-ip-address> <mask> - Denies packets with the specified destination IP address and the network mask for the given destination IP address. Chapter 47 ACL 21
22 tos - Denies the protocol packets based on the following type of service configuration. The options are, max-reliability - Denies the protocol packets having TOS field set as high reliability. max-throughput - Denies the protocol packets having TOS field set as high throughput. min-delay - Denies the protocol packets having TOS field set as low delay. normal - Denies all protocol packets. Does not check for the TOS field in the packets. <value (0-7)> - Denies the protocol packets based on the TOS value set. This value ranges from 0 to 7. This value represents different combination of TOS. 0 - Denies all protocol packets. Does not check for the TOS field in the packets. 1 - Denies the protocol packets having TOS field set as high reliability. 2 - Denies the protocol packets having TOS field set as high throughput. 3 - Denies the protocol packets having TOS field set either as high reliability or high throughput. 4 - Denies the protocol packets having TOS field set as low delay. 5 - Denies the protocol packets having TOS field set either as low delay or high reliability. 6 - Denies the protocol packets having TOS field set either as low delay or high throughput. 7 - Denies the protocol packets having TOS field set either as low delay, high reliability, or high throughput. dscp Configures the Differentiated Services Code Point (DSCP) which provides the quality of service control. The various options available are: <value (0-63)> Configures the Differentiated Services Code Point value. This value ranges from 0 to 63. af11 - Matches packets with AF11 DSCP (001010). af12 - Matches packets with AF12 DSCP (001100). af13 - Matches packets with AF13 DSCP (001110). af21 - Matches packets with AF21 DSCP (010010). af22 - Matches packets with AF22 DSCP (010100). af23 - Matches packets with AF23 DSCP (010110). af31 - Matches packets with AF31 DSCP (011010). af32 - Matches packets with AF32 DSCP (011100). af33 - Matches packets with AF33 DSCP (011110). af41 - Matches packets with AF41 DSCP (100010). af42 - Matches packets with AF42 DSCP (100100). 22 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
23 af43 - Matches packets with AF43 DSCP (100110). cs1 - Matches packets with CS1 (precedence 1) DSCP (001000). cs2 - Matches packets with CS2 (precedence 2) DSCP (010000). cs3 - Matches packets with CS3 (precedence 3) DSCP (011000). cs4 - Matches packets with CS4 (precedence 4) DSCP (100000). cs5 - Matches packets with CS5 (precedence 5) DSCP (101000). cs6 - Matches packets with CS6 (precedence 6) DSCP (110000). cs7 - Matches packets with CS7 (precedence 7) DSCP (111000). default - Default DSCP (000000). ef - Matches packets with EF DSCP (101110). priority <(1-7)> Configures the priority value of the L3 filter to be used when the packet matches more than one filter rule. Higher value of filter priority implies a higher priority. This value ranges from 1 to 7. <precedence (0-7)> - Precedence level to be used for filtering packets. This parameter is newly added in the existing command for industry standard CLI. The values are: 0 - Matches packets with routine precedence. 1 - Matches packets with priority precedence. 2 - Matches packets with immediate precedence. 3 - Matches packets with flash precedence. 4 - Matches packets with flash override precedence. 5 - Matches packets with critical precedence. 6 - Matches packets with internetwork control precedence. 7 - Matches packets with network control precedence. fragments - Considers fragments in the access list entry and examines non-initial fragments of IPv4 packets, when applying the access list entry. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. log - Creates informational logging message about the packets that match the entry to be sent to the console. This message includes the access list number, whether the packet is permitted or denied, the protocol, whether the protocol is TCP, UDP, ICMP, or a number, and, if appropriate, the source and destination addresses and source and destination port numbers. This message is generated for the first packet that matches a flow. This message is then generated at five minute intervals with the number of packets permitted or denied in the prior five minute interval. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. log-input - Creates information logging message along with the Chapter 47 ACL 23
24 information about the input interface. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. reflect <access-list> Reflects the name of the reflexive access list. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. time-range <value> - Applies the time range. Time range defines the time when the permit or deny statements of the access control list are in effect. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. Mode Package Defaults MAC Access List Configuration Mode Workgroup, Enterprise, Metro_E, and Metro protocol type priority - 1 Note: dscp - -1 Protocol type with the value 255 indicates that protocol can be anything and it will not be checked against the action to be performed. Example Related Command(s) Service VLAN, Service VLAN Priority, Customer VLAN and Customer VLAN Priority options are applicable only for Metro Solution, when the bridge mode is Provider Bridge. SEFOS (config-ext-nacl)# deny ospf any host tos max-throughput ip access-list - Creates IP ACLs and enters the IP access list configuration mode. permit- ip/ospf/pim/protocol type - Allows traffic for a particular protocol packet if the conditions defined in the permit statement are matched. show access-lists - Displays the access list configuration. 24 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
25 permit tcp Command Objective Syntax This command specifies the TCP packets to be forwarded based on the associated parameters. permit tcp {any host <src-ip-address> <src-ip-address> <src-mask> }[{gt <port-number ( )> lt <port-number ( )> eq <port-number ( )> range <port-number ( )> <port-number ( )>}]{ any host <dest-ipaddress> <dest-ip-address> <dest-mask> }[{gt <port-number ( )> lt <port-number ( )> eq <port-number ( )> range <port-number ( )> <port-number ( )>}][{ ack rst }][{tos{max-reliability maxthroughput min-delay normal <tos-value(0-7)>} dscp {<value (0-63)> af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 cs1 cs2 cs3 cs4 cs5 cs6 cs7 default ef}}][ priority <value(1-7)>] [{precedence <short(0-7)> fragments log log-input reflect <access-list> time-range <value>}] Parameter Description any host <src-ip-address> < src-ip-address> < src-mask> - Permits traffic with the specified source address. The sources are: any - Permits TCP packets from any source. host <src-ip-address> - Permits TCP packets from the specified host source IPv4 address. <src-ip-address> <src-mask> - Permits TCP packets from the specified source IP address and the network mask to be used with the source IP address. gt <port-number ( )> - Allows only the TCP control packets having the TCP source port numbers greater than the specified port number. This value ranges from 1 to lt <port-number ( )> - Allows only the TCP control packets having the TCP source port numbers lesser than the specified port number. This value ranges from 1 to eq <port-number ( )> - Allows only the TCP control packets having the specified TCP source port numbers. This value ranges from 1 to range <port-number ( )> <port-number ( )>- Allows only the TCP control packets having the TCP source port numbers within the specified range. This value ranges from 1 to This value specifies the minimum port number and the maximum port number values. any host <dest-ip-address> < dest-ip-address > < destmask> - Permits the TCP packets with the specified destination address. Chapter 47 ACL 25
26 The destination can be: any - Permits TCP packets with any destination. host <dest-ip-address> - Permits TCP packets with specified host destination IPv4 address. <dest-ip-address> < dest-mask> - Permits TCP packets with the specified destination IP address and the network mask for the given destination IP address. gt <port-number ( )> - Allows only the TCP control packets having the TCP destination port numbers greater than the specified port number. This value ranges from 1 to lt <port-number ( )> - Allows only the TCP control packets having the TCP destination port numbers lesser than the specified port number. This value ranges from 1 to eq <port-number ( )> - Allows only the TCP control packets having the specified TCP destination port numbers. This value ranges from 1 to range <port-number ( )> <port-number ( )> - Allows only the TCP control packets having the TCP destination port numbers within the specified range. This value ranges from 1 to This value specifies the minimum port number and the maximum port number values. ack - Configures the TCP ACK bit to be checked against the packet. rst - Configures the TCP RST bit to be checked against the packet. tos - Allows the protocol packets based on the following types of service configuration: max-reliability - Allows the protocol packets having TOS field set as high reliability. max-throughput - Allows the protocol packets having TOS field set as high throughput. min-delay - Allows the protocol packets having TOS field set as low delay. normal - Allows all protocol packets. Does not check for the TOS field in the packets. <value (0-7)> - Allows the protocol packets based on the TOS value set. This value ranges from 0 to 7. This value represents different combination of TOS. 0 - Allows all protocol packets. Does not check for the TOS field in the packets. 1 - Allows the protocol packets having TOS field set as high reliability. 2 - Allows the protocol packets having TOS field set as high throughput. 26 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
27 3 - Allows the protocol packets having TOS field set either as high reliability or high throughput. 4 - Allows the protocol packets having TOS field set as low delay. 5 - Allows the protocol packets having TOS field set either as low delay or high reliability. 6 - Allows the protocol packets having TOS field set either as low delay or high throughput. 7 - Allows the protocol packets having TOS field set either as low delay, high reliability, or high throughput. dscp Configures the Differentiated Services Code Point (DSCP) which provides the quality of service control. The various options available are: <value (0-63)> Configures the Differentiated Services Code Point value. This value ranges from 0 to 63. af11 - Matches packets with AF11 DSCP (001010). af12 - Matches packets with AF12 DSCP (001100). af13 - Matches packets with AF13 DSCP (001110). af21 - Matches packets with AF21 DSCP (010010). af22 - Matches packets with AF22 DSCP (010100). af23 - Matches packets with AF23 DSCP (010110). af31 - Matches packets with AF31 DSCP (011010). af32 - Matches packets with AF32 DSCP (011100). af33 - Matches packets with AF33 DSCP (011110). af41 - Matches packets with AF41 DSCP (100010). af42 - Matches packets with AF42 DSCP (100100). af43 - Matches packets with AF43 DSCP (100110). cs1 - Matches packets with CS1 (precedence 1) DSCP (001000). cs2 - Matches packets with CS2 (precedence 2) DSCP (010000). cs3 - Matches packets with CS3 (precedence 3) DSCP (011000). cs4 - Matches packets with CS4 (precedence 4) DSCP (100000). cs5 - Matches packets with CS5 (precedence 5) DSCP (101000). cs6 - Matches packets with CS6 (precedence 6) DSCP (110000). cs7 - Matches packets with CS7 (precedence 7) DSCP (111000). default - Default DSCP (000000). ef - Matches packets with EF DSCP (101110). priority <(1-7)> Configures the priority value of the L3 filter to be used when the packet matches more than one filter rule. Higher value of filter priority implies a higher priority. This value ranges from 1 to 7. <precedence (0-7)> - Precedence level to be used for filtering packets. This parameter is newly added in the existing command for industry standard CLI. The values are: Chapter 47 ACL 27
28 0 - Matches packets with routine precedence. 1 - Matches packets with priority precedence. 2 - Matches packets with immediate precedence. 3 - Matches packets with flash precedence. 4 - Matches packets with flash override precedence. 5 - Matches packets with critical precedence. 6 - Matches packets with internetwork control precedence. 7 - Matches packets with network control precedence. fragments - Considers fragments in the access list entry and examines non-initial fragments of IPv4 packets, when applying the access list entry. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. log - Creates informational logging message about the packets that match the entry to be sent to the console. This message includes the access list number, whether the packet is permitted or denied, the protocol, whether the protocol is TCP (Transport Control Protocol), UDP (User Datagram Protocol), ICMP (Internet Control Message Protocol) or a number, and, if appropriate, the source and destination addresses and source and destination port numbers. This message is generated for the first packet that matches a flow. This message is then generated at five minute intervals with the number of packets permitted or denied in the prior five minute interval. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. log-input - Creates information logging message along with the information about the input interface. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. reflect <access-list> Reflects the name of the reflexive access list. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. time-range <value> - Applies the time range. Time range defines the time when the permit or deny statements of the access control list are in effect. Note: This feature has been included to adhere to the Industry Standard CLI syntax. This feature is currently not supported. 28 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
29 Mode Package Defaults ACL Extended Access List Configuration Mode Workgroup, Enterprise, Metro_E, and Metro tos-value - 0 dscp - 1 priority - 1 Example SEFOS (config-ext-nacl)# permit tcp any range gt 1 Related Command(s) ip access-list - Creates IP access lists and enters the IP access list configuration mode. deny tcp - Specifies the TCP packets to be rejected based on the associated parameters. show access-lists - Displays the access list configuration. Chapter 47 ACL 29
30 deny tcp Command Objective Syntax This command specifies the TCP packets to be rejected based on the associated parameters. deny tcp {any host <src-ip-address> <src-ip-address> <src-mask> }[{gt <port-number ( )> lt <port-number ( )> eq <port-number ( )> range <port-number ( )> <port-number ( )>}]{ any host <dest-ipaddress> <dest-ip-address> <dest-mask> }[{gt <portnumber ( )> lt <port-number ( )> eq <portnumber ( )> range <port-number ( )> <portnumber ( )>}][{ ack rst }][{tos{max- reliability max-throughput min-delay normal <tos-value(0-7)>} dscp {<value (0-63)> af11 af12 af13 af21 af22 af23 af31 af32 af33 af41 af42 af43 cs1 cs2 cs3 cs4 cs5 cs6 cs7 default ef}}][ priority <value(1-7)>] [{precedence <short(0-7)> fragments log log-input reflect <access-list> time-range <value>}] Parameter Description any host <src-ip-address> < src-ip-address> < srcmask> - Denies traffic with the specified source address. The sources are: any - Denies TCP packets from any source. host <src-ip-address> - Denies TCP packets with the specified host source IPv4 address. <src-ip-address> < src-mask> - Denies TCP packets with the specified source IP address and the network mask to be used with the source IP address. gt <port-number ( )> - Denies only the TCP control packets having the TCP source port numbers greater than the specified port number. This value ranges from 1 to lt <port-number ( )> - Denies only the TCP control packets having the TCP source port numbers lesser than the specified port number. This value ranges from 1 to eq <port-number ( )> - Denies only the TCP control packets having the specified TCP source port numbers. This value ranges from 1 to range <port-number ( )> <port-number ( )> - Denies only the TCP control packets having the TCP source port numbers within the specified range. This value ranges from 1 to This value specifies the minimum port number and the maximum port number values. any host <dest-ip-address> < dest-ip-address > < dest- 30 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
31 mask> - Denies the TCP packets with the specified destination address. The destination can be: any - Denies TCP packets with any destination. host <dest-ip-address> - Denies TCP packets with specified host destination IPv4 address. <dest-ip-address> <dest-mask> - Denies TCP packets with the specified destination IP address and the network mask for the given destination IP address. gt <port-number ( )> - Denies only the TCP control packets having the TCP destination port numbers greater than the specified port number. This value ranges from 1 to lt <port-number ( )> - Denies only the TCP control packets having the TCP destination port numbers lesser than the specified port number. This value ranges from 1 to eq <port-number ( )> - Denies only the TCP control packets having the specified TCP destination port numbers. This value ranges from 1 to range <port-number ( )> <port-number ( )> - Denies only the TCP control packets having the TCP destination port numbers within the specified range. This value ranges from 1 to This value specifies the minimum port number and the maximum port number values. ack - Configures the TCP ACK bit to be checked against the packet. rst - Configures the TCP RST bit to be checked against the packet. tos - Denies the protocol packets based on the following type of service configuration. The options are, max-reliability - Denies the protocol packets having TOS field set as high reliability. max-throughput - Denies the protocol packets having TOS field set as high throughput. min-delay - Denies the protocol packets having TOS field set as low delay. normal - Denies all protocol packets. Does not check for the TOS field in the packets. <value (0-7)> - Denies the TCP packets based on the TOS value set. This value ranges from 0 to 7. This value represents different combination of TOS. 0 - Denies all packets. Does not check for the TOS field in the packets. 1 - Denies the packets having TOS field set as high reliability. 2 - Denies the packets having TOS field set as high throughput. 3 - Denies the packets having TOS field set either as high reliability Chapter 47 ACL 31
32 or high throughput. 4 - Denies the packets having TOS field set as low delay. 5 - Denies the packets having TOS field set either as low delay or high reliability. 6 - Denies the packets having TOS field set either as low delay or high throughput. 7 - Denies the packets having TOS field set either as low delay, high reliability, or high throughput. dscp Configures the Differentiated Services Code Point (DSCP) which provides the quality of service control. The various options available are: <value (0-63)> Configures the Differentiated Services Code Point value. This value ranges from 0 to 63. af11 - Matches packets with AF11 DSCP (001010). af12 - Matches packets with AF12 DSCP (001100). af13 - Matches packets with AF13 DSCP (001110). af21 - Matches packets with AF21 DSCP (010010). af22 - Matches packets with AF22 DSCP (010100). af23 - Matches packets with AF23 DSCP (010110). af31 - Matches packets with AF31 DSCP (011010). af32 - Matches packets with AF32 DSCP (011100). af33 - Matches packets with AF33 DSCP (011110). af41 - Matches packets with AF41 DSCP (100010). af42 - Matches packets with AF42 DSCP (100100). af43 - Matches packets with AF43 DSCP (100110). cs1 - Matches packets with CS1 (precedence 1) DSCP (001000). cs2 - Matches packets with CS2 (precedence 2) DSCP (010000). cs3 - Matches packets with CS3 (precedence 3) DSCP (011000). cs4 - Matches packets with CS4 (precedence 4) DSCP (100000). cs5 - Matches packets with CS5 (precedence 5) DSCP (101000). cs6 - Matches packets with CS6 (precedence 6) DSCP (110000). cs7 - Matches packets with CS7 (precedence 7) DSCP (111000). default - Default DSCP (000000). ef - Matches packets with EF DSCP (101110). priority <(1-7)> Configures the priority value of the L3 filter to be used when the packet matches more than one filter rule. Higher value of filter priority implies a higher priority. This value ranges from 1 to 7. <precedence (0-7)> - Precedence level to be used for filtering packets. This parameter is newly added in the existing command for industry standard CLI. The values are: 0 - Matches packets with routine precedence. 32 Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 8 August 2015
Oracle ZFS Storage Appliance Cabling Guide. For ZS3-x, 7x20 Controllers, and DE2-24, Sun Disk Shelves
Oracle ZFS Storage Appliance Cabling Guide For ZS3-x, 7x20 Controllers, and DE2-24, Sun Disk Shelves Part No: E53670-01 June 2014 Copyright 2009, 2014, Oracle and/or its affiliates. All rights reserved.
More informationSun Ethernet Fabric Operating System. LLA Administration Guide
Sun Ethernet Fabric Operating System LLA Administration Guide Part No.: E41876-01 July 2013 Copyright 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation are
More informationSun Ethernet Fabric Operating System RMON Administration Guide
Sun Ethernet Fabric Operating System RMON Administration Guide Part No: E24665-03 July 2015 Part No: E24665-03 Copyright 2010, 2015, Oracle and/or its affiliates. All rights reserved. This software and
More informationOracle Dual Port QDR InfiniBand Adapter M3. Product Notes
Oracle Dual Port QDR InfiniBand Adapter M3 Product Notes Part No.: E40986-01 September 2013 Copyright 2013 Oracle and/or its affiliates. All rights reserved. This software and related documentation are
More informationSun Ethernet Fabric Operating System. IGMP Administration Guide
Sun Ethernet Fabric Operating System IGMP Administration Guide Part No.: E21712-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. MLDS Administration Guide
Sun Ethernet Fabric Operating System MLDS Administration Guide Part No.: E25211-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle ZFS Storage Appliance Simulator Quick Start Guide
Oracle ZFS Storage Appliance Simulator Quick Start Guide March 2015 Part No: E39468-05 This document is a guide to Oracle ZFS Storage Appliance Simulator setup and initial configuration. The Simulator
More informationSun Ethernet Fabric Operating System. RIP Administration Guide
Sun Ethernet Fabric Operating System RIP Administration Guide Part No.: E21705-03 July 2013 Copyright 2010, 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. ONET Administration Guide
Sun Ethernet Fabric Operating System ONET Administration Guide Part No.: E26379-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System IGS Administration Guide
Sun Ethernet Fabric Operating System IGS Administration Guide Part No: E21708-03 July 2015 Part No: E21708-03 Copyright 2010, 2015, Oracle and/or its affiliates. All rights reserved. This software and
More informationSun Ethernet Fabric Operating System. RIP Administration Guide
Sun Ethernet Fabric Operating System RIP Administration Guide Part No: E21705-04 July 2015 Part No: E21705-04 Copyright 2010, 2015, Oracle and/or its affiliates. All rights reserved. This software and
More informationNetra Blade X3-2B (formerly Sun Netra X6270 M3 Blade) for VMware ESXi. Installation Guide
Netra Blade X3-2B (formerly Sun Netra X6270 M3 Blade) for VMware ESXi Installation Guide Part No.: E28262-04 November 2012 Copyright 2012, Oracle and/or its affiliates. All rights reserved. This software
More informationOptimizing the Oracle Solaris Desktop for a Multi-User Environment
Optimizing the Oracle Solaris Desktop for a Multi-User Environment October 2017 Part No: E54805 This article helps Oracle Solaris 11 system administrators to understand how to optimize the Oracle Solaris
More informationSun Ethernet Fabric Operating System. DHCP Administration Guide
Sun Ethernet Fabric Operating System DHCP Administration Guide Part No.: E21716-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. QoS Administration Guide
Sun Ethernet Fabric Operating System QoS Administration Guide Part No. E20748-02 October 2011 Copyright 2010, 2011, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. QoS Administration Guide
Sun Ethernet Fabric Operating System QoS Administration Guide Part No: E20748-03 July 2015 Part No: E20748-03 Copyright 2010, 2015, Oracle and/or its affiliates. All rights reserved. This software and
More informationOracle Solaris Cluster Data Service for DHCP Guide
Oracle Solaris Cluster Data Service for DHCP Guide Part No: E63543 September 2015 Oracle Solaris Cluster Data Service for DHCP Guide Part No: E63543 Copyright 2010, 2015, Oracle and/or its affiliates.
More informationOracle Flash Storage System and Oracle MaxRep for SAN Security Guide
Oracle Flash Storage System and Oracle MaxRep for SAN Security Guide Part Number E56029-01 Oracle Flash Storage System, release 6.1 Oracle MaxRep for SAN, release 3.0 2014 October Oracle Flash Storage
More informationOracle Hardware Management Pack 2.4 Installation Guide
Oracle Hardware Management Pack 2.4 Installation Guide Part No: E72070-03 September 2017 Oracle Hardware Management Pack 2.4 Installation Guide Part No: E72070-03 Copyright 2017, Oracle and/or its affiliates.
More informationOracle ZFS Storage Appliance Cabling Guide. For ZS5-x, ZS4-4, ZS3-x, 7x20 Controllers, and DEx-24, Sun Disk Shelves, Release OS8.6.
Oracle ZFS Storage Appliance Cabling Guide For ZS5-x, ZS4-4, ZS3-x, 7x20 Controllers, and DEx-24, Sun Disk Shelves, Release OS8.6.x Part No: E76482-02 December 2016 Oracle ZFS Storage Appliance Cabling
More informationOracle Advanced Support Gateway Security Guide
Oracle Advanced Support Security Guide Part No: E40643-19 October 2017 Security Guide Part No: E40643-19 Copyright 2017, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. OSPF Administration Guide
Sun Ethernet Fabric Operating System OSPF Administration Guide Part No: E21707-03 July 2015 Part No: E21707-03 Copyright 2010, 2015, Oracle and/or its affiliates. All rights reserved. This software and
More informationSun Server X4-2. Installation Guide for Oracle Solaris Operating System
Sun Server X4-2 Installation Guide for Oracle Solaris Operating System Part No.: E38020-03 November 2013 Copyright 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. OSPF Administration Guide
Sun Ethernet Fabric Operating System OSPF Administration Guide Part No.: E21707-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle SuperCluster M8 and SuperCluster M7 Overview Guide
Oracle SuperCluster M8 and SuperCluster M7 Overview Guide Part No: E58633-10 March 2018 Oracle SuperCluster M8 and SuperCluster M7 Overview Guide Part No: E58633-10 Copyright 2015, 2018, Oracle and/or
More informationSun Ethernet Fabric Operating System. IEEE DCBX Administration Guide
Sun Ethernet Fabric Operating System IEEE DCBX Administration Guide Part No.: E41875-02 August 2013 Copyright 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSPARC T7-1 Server Installation Guide
SPARC T7-1 Server Installation Guide Part No: E54979-02 July 2017 SPARC T7-1 Server Installation Guide Part No: E54979-02 Copyright 2015, 2017, Oracle and/or its affiliates. All rights reserved. This
More informationOracle MaxMan. User s Guide. Part Number E Oracle MaxMan release October
Oracle MaxMan User s Guide Part Number E54894-01 Oracle MaxMan release 6.1 2014 October Copyright 2005, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Server X4-2. Security Guide
Sun Server X4-2 Security Guide Part No.: E38042-03 May 2014 Copyright 2013, 2014 Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license
More informationSun Ethernet Fabric Operating System CLI Reference Manual, Vol. 6
Sun Ethernet Fabric Operating System CLI Reference Manual, Vol. 6 Part No: E60930-02 August 2015 Copyright 2015, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationNetra Blade X3-2B (formerly Sun Netra X6270 M3 Blade) for Windows Operating System. Installation Guide
Netra Blade X3-2B (formerly Sun Netra X6270 M3 Blade) for Windows Operating System Installation Guide Part No.: E26412-04 November 2012 Copyright 2012, Oracle and/or its affiliates. All rights reserved.
More informationOracle Server X6-2 Security Guide
Oracle Server X6-2 Security Guide Part No: E62163-01 April 2016 Oracle Server X6-2 Security Guide Part No: E62163-01 Copyright 2016, Oracle and/or its affiliates. All rights reserved. This software and
More informationOracle Solaris Cluster 4 Compatibility Guide
Oracle Solaris Cluster 4 Compatibility Guide Part No: E87540 September 2018 Oracle Solaris Cluster 4 Compatibility Guide Part No: E87540 Copyright 2018, Oracle and/or its affiliates. All rights reserved.
More informationInstalling Oracle Solaris 11.3 Systems
Installing Oracle Solaris 11.3 Systems Part No: E54756 September 2018 Installing Oracle Solaris 11.3 Systems Part No: E54756 Copyright 2011, 2018, Oracle and/or its affiliates. All rights reserved. This
More informationOracle Server X5-4 Installation Guide for Windows Operating Systems
Oracle Server X5-4 Installation Guide for Windows Operating Systems Part No: E56394-03 December 2015 Oracle Server X5-4 Installation Guide for Windows Operating Systems Part No: E56394-03 Copyright 2015,
More informationSPARC M8 and SPARC M7 Servers Product Notes
SPARC M8 and SPARC M7 Servers Product Notes Part No: E55216-13 October 2017 SPARC M8 and SPARC M7 Servers Product Notes Part No: E55216-13 Copyright 2015, 2017, Oracle and/or its affiliates. All rights
More informationSun StorageTek 2500 Series Array Firmware Upgrade Guide
Sun StorageTek 2500 Series Array Firmware Upgrade Guide for controller firmware version 7.35 Part No. 820-6362-13 August 2010, Revision D Copyright 2010, Oracle and/or its affiliates. All rights reserved.
More informationManaging Network Datalinks in Oracle Solaris 11.4
Managing Network Datalinks in Oracle Solaris 11.4 Part No: E60990 August 2018 Managing Network Datalinks in Oracle Solaris 11.4 Part No: E60990 Copyright 2011, 2018, Oracle and/or its affiliates. All
More informationSun Ethernet Fabric Operating System. SLB Administration Guide
Sun Ethernet Fabric Operating System SLB Administration Guide Part No.: E26351-03 July 2013 Copyright 2010, 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle X4 Series Servers Administration Guide
Oracle X4 Series Servers Administration Guide Part No: E37044-10 April 2016 Oracle X4 Series Servers Administration Guide Part No: E37044-10 Copyright 2014, 2016, Oracle and/or its affiliates. All rights
More informationManaging Boot EnvironmentsWith Oracle Solaris 11 Express
Managing Boot EnvironmentsWith Oracle Solaris 11 Express Part No: 820 6565 12 November 2010 Copyright 2010, Oracle and/or its affiliates. All rights reserved. This software and related documentation are
More informationOracle Server X5-8 Installation Guide for Linux Operating Systems
Oracle Server X5-8 Installation Guide for Linux Operating Systems Part No: E56308-03 December 2015 Oracle Server X5-8 Installation Guide for Linux Operating Systems Part No: E56308-03 Copyright 2015,
More informationOracle Solaris 11.3 Desktop User's Guide
Oracle Solaris 11.3 Desktop User's Guide Part No: E54809 October 2017 Oracle Solaris 11.3 Desktop User's Guide Part No: E54809 Copyright 2011, 2017, Oracle and/or its affiliates. All rights reserved.
More informationSun Server X2-4 (formerly Sun Fire X4470 M2) Installation Guide for Oracle Solaris Operating System
Sun Server X2-4 (formerly Sun Fire X4470 M2) Installation Guide for Oracle Solaris Operating System Part No.: E20787-03 September 2012 Copyright 2011, 2012, Oracle and/or its affiliates. All rights reserved.
More informationSun Server X4-4 Installation Guide for Oracle Solaris Operating System
Sun Server X4-4 Installation Guide for Oracle Solaris Operating System Part No: E38216-03 October 2015 Sun Server X4-4 Installation Guide for Oracle Solaris Operating System Part No: E38216-03 Copyright
More informationSun Server X4-2L. Installation Guide for Windows Server Operating Systems
Sun Server X4-2L Installation Guide for Windows Server Operating Systems Part No.: E38155-03 February 2014 Copyright 2013, 2014, Oracle and/or its affiliates. All rights reserved. This software and related
More informationOracle Server Management Agent for Oracle Solaris 11.3 User's Guide
Oracle Server Management Agent for Oracle Solaris 11.3 User's Guide Part No: E64581-03 October 2017 Oracle Server Management Agent for Oracle Solaris 11.3 User's Guide Part No: E64581-03 Copyright 2014,
More informationTrusted Extensions User's Guide
Trusted Extensions User's Guide Part No: E54844 October 2017 Trusted Extensions User's Guide Part No: E54844 Copyright 1997, 2017, Oracle and/or its affiliates. All rights reserved. This software and
More informationOracle Developer Studio 12.5: Installation Guide
Oracle Developer Studio 12.5: Installation Guide Part No: E60743 July 2016 Oracle Developer Studio 12.5: Installation Guide Part No: E60743 Copyright 2014, 2016, Oracle and/or its affiliates. All rights
More informationOracle ILOM Security Guide For Firmware Releases 3.x and 4.x
Oracle ILOM Security Guide For Firmware Releases 3.x and 4.x Part No: E37451-17 December 2017 Oracle ILOM Security Guide For Firmware Releases 3.x and 4.x Part No: E37451-17 Copyright 2012, 2017, Oracle
More informationSun Server X3-2L (formerly Sun Fire X4270 M3) Administration Guide
Sun Server X3-2L (formerly Sun Fire X4270 M3) Administration Guide Part No.: E23402-10 April 2014 Copyright 2012, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Ethernet Fabric Operating System. IPv6 Administration Guide
Sun Ethernet Fabric Operating System IPv6 Administration Guide Part No.: E24662-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationAdding Custom Data to Oracle Solaris 11.4 Analytics
Adding Custom Data to Oracle Solaris 11.4 Analytics Part No: E61819 Draft 2018-01-30-16:53:42-08:00 Draft 2018-01-30-16:53:42-08:00 Adding Custom Data to Oracle Solaris 11.4 Analytics Part No: E61819 Copyright
More informationSun Flash Accelerator F40 PCIe Card. Security Guide
Sun Flash Accelerator F40 PCIe Card Security Guide Part No.: E29743-02 October 2013 Copyright 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided
More informationOracle Fabric Interconnect F2-12 and Oracle F2 I/O Modules Product Notes
Oracle Fabric Interconnect F2-12 and Oracle F2 I/O Modules Product Notes Part No: E74399-02 December 2016 Oracle Fabric Interconnect F2-12 and Oracle F2 I/O Modules Product Notes Part No: E74399-02 Copyright
More informationSun Network QDR InfiniBand Gateway Switch
Sun Network QDR InfiniBand Gateway Switch Service Manual for Firmware Version 2.0 Part No.: E26710-01 November 2011, Revision A Copyright 2011, Oracle and/or its affiliates. All rights reserved. This software
More informationCompartmented Mode Workstation Labeling: Encodings Format
Compartmented Mode Workstation Labeling: Encodings Format Part No: E54743 October 2017 Compartmented Mode Workstation Labeling: Encodings Format Part No: E54743 Copyright 1992, 2017, Oracle and/or its
More informationOracle Solaris 11.2 Desktop User's Guide
Oracle Solaris 11.2 Desktop User's Guide Part No: E36851 July 2014 Copyright 2011, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a
More informationConfiguring and Managing Printing in Oracle Solaris 11.4
Configuring and Managing Printing in Oracle Solaris 11.4 Part No: E60999 August 2018 Configuring and Managing Printing in Oracle Solaris 11.4 Part No: E60999 Copyright 2009, 2018, Oracle and/or its affiliates.
More informationSun Server X4-2. Installation Guide for VMware ESXi
Sun Server X4-2 Installation Guide for VMware ESXi Part No.: E38024-03 February 2014 Copyright 2013, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation are
More informationManaging Network Virtualization and Network Resources in Oracle Solaris 11.3
Managing Network Virtualization and Network Resources in Oracle Solaris 11.3 Part No: E5479 December 217 Managing Network Virtualization and Network Resources in Oracle Solaris 11.3 Part No: E5479 Copyright
More informationNetra Server X5-2 Operating System Installation Guide
Netra Server X5-2 Operating System Installation Guide Part No: E53599-03 October 2016 Netra Server X5-2 Operating System Installation Guide Part No: E53599-03 Copyright 2015, 2016, Oracle and/or its affiliates.
More informationOracle ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x
Oracle ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x Part No: E37446-21 January 2017 Oracle ILOM Administrator's Guide for Configuration and Maintenance Firmware
More informationOracle InfiniBand Switch IS2-46 Product Notes
Oracle InfiniBand Switch IS2-46 Product Notes Part No: E65870-01 September 2016 Oracle InfiniBand Switch IS2-46 Product Notes Part No: E65870-01 Copyright 2016, Oracle and/or its affiliates. All rights
More informationJavaTest Harness 4.4. JavaTest Agent User s Guide
JavaTest Harness 4.4 JavaTest Agent User s Guide May 2011 Copyright 2005, 2011, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement
More informationAdding and Updating Software in Oracle Solaris 11.3
Adding and Updating Software in Oracle Solaris 11.3 Part No: E54739 March 2018 Adding and Updating Software in Oracle Solaris 11.3 Part No: E54739 Copyright 2007, 2018, Oracle and/or its affiliates. All
More informationTrusted Extensions User's Guide
Trusted Extensions User's Guide Part No: E36841 July 2014 Copyright 1997, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement
More informationOracle Solaris Studio 12.4: Performance Analyzer Tutorials
Oracle Solaris Studio 12.4: Performance Analyzer Tutorials Part No: E37087 December 2014 Copyright 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided
More informationUsing Oracle Compute Cloud Service Dedicated Compute Capacity - SPARC. Model 300
Using Oracle Compute Cloud Service Dedicated Compute Capacity - SPARC Model 300 Part No: E74671-08 April 2018 Using Oracle Compute Cloud Service - Dedicated Compute Capacity - SPARC Model 300 Part No:
More informationSun Network QDR InfiniBand Gateway Switch
Sun Network QDR InfiniBand Gateway Switch Service Manual Part No. 821-1188-11 June 2011, Revision A Copyright 2011, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle Solaris Cluster Data Service for Apache Tomcat Guide
Oracle Solaris Cluster Data Service for Apache Tomcat Guide Part No: E63542 June 2017 Oracle Solaris Cluster Data Service for Apache Tomcat Guide Part No: E63542 Copyright 2010, 2017, Oracle and/or its
More informationOracle Solaris Cluster Data Services Planning and Administration Guide
Oracle Solaris Cluster Data Services Planning and Administration Guide Part No: E39648 September 2014, E39648 02 Copyright 2000, 2014, Oracle and/or its affiliates. All rights reserved. This software
More informationOracle Solaris Cluster With Network- Attached Storage Device Manual
Oracle Solaris Cluster With Network- Attached Storage Device Manual Part No: E39824 July 2014, E39824-01 Copyright 2000, 2014, Oracle and/or its affiliates. All rights reserved. This software and related
More informationOracle Server Management Agent for Oracle Solaris 11.2 User's Guide
Oracle Server Management Agent for Oracle Solaris 11.2 User's Guide Part No: E51811-05 June 2015 Part No: E51811-05 Copyright 2014, 2015, Oracle and/or its affiliates. All rights reserved. This software
More informationPart No September 2010, Revision A. Sun Blade6000 Virtualized Multi- Fabric 10GbE Network Express Module Product Notes
Part No. 820-6584-17 September 2010, Revision A Sun Blade6000 Virtualized Multi- Fabric 10GbE Network Express Module Product Notes Copyright 2009, 2010, Oracle and/or its affiliates. All rights reserved.
More informationManaging Remote Systems in Oracle Solaris 11.3
Managing Remote Systems in Oracle Solaris 11.3 Part No: E54791 October 2017 Managing Remote Systems in Oracle Solaris 11.3 Part No: E54791 Copyright 2002, 2017, Oracle and/or its affiliates. All rights
More informationOracle Developer Studio 12.6: IDE Quick Start Tutorial
Oracle Developer Studio 12.6: IDE Quick Start Tutorial Part No: E77787 June 2017 Oracle Developer Studio 12.6: IDE Quick Start Tutorial Part No: E77787 Copyright 2013, 2017, Oracle and/or its affiliates.
More informationSun Server X4-8 Installation Guide for Windows Operating System
Sun Server X4-8 Installation Guide for Windows Operating System Part No: E40308-03 December 2015 Sun Server X4-8 Installation Guide for Windows Operating System Part No: E40308-03 Copyright 2014, 2015,
More informationStorageTek 4 Gb FC Dual Port ExpressModule HBA From Emulex. Installation Guide For HBA Models SG-XPCIE2FC- EB4-Z and SG-PCIE2FC-EB4-Z
StorageTek 4 Gb FC Dual Port ExpressModule HBA From Emulex Installation Guide For HBA Models SG-XPCIE2FC- EB4-Z and SG-PCIE2FC-EB4-Z Part No.: E41889-01 July 2013 Copyright 2007, 2013, Oracle and/or its
More informationSun Storage Common Array Manager. Array Administration Guide, Version 6.9.0
Sun Storage Common Array Manager Array Administration Guide, Version 6.9.0 Part No.: E24011-01 December 2011 Copyright 2007, 2011, Oracle and/or its affiliates. All rights reserved. This software and related
More informationOracle Solaris Cluster Data Service for SAP NetWeaver Guide
Oracle Solaris Cluster Data Service for SAP NetWeaver Guide Part No: E56866 February 2017 Oracle Solaris Cluster Data Service for SAP NetWeaver Guide Part No: E56866 Copyright 2012, 2017, Oracle and/or
More informationOracle Secure Global Desktop
Oracle Secure Global Desktop Installation Guide for Version 4.6 Part No. 821-1927-10 August 2010, Revision 01 Copyright 2010, Oracle and/or its affiliates. All rights reserved. This software and related
More informationUsing Oracle Solaris 11.4 StatsStore and System Web Interface
Using Oracle Solaris 11.4 StatsStore and System Web Interface Part No: E56520 August 2018 Using Oracle Solaris 11.4 StatsStore and System Web Interface Part No: E56520 Copyright 2018, Oracle and/or its
More informationSun Storage 2500-M2 Arrays. Hardware Installation Guide
Sun Storage 2500-M2 Arrays Hardware Installation Guide Part No.: E20740-01 June 2011 Copyright 2011, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided
More informationUpdating Systems and Adding Software in Oracle Solaris 11.4
Updating Systems and Adding Software in Oracle Solaris 11.4 Part No: E60979 August 2018 Updating Systems and Adding Software in Oracle Solaris 11.4 Part No: E60979 Copyright 2007, 2018, Oracle and/or
More informationSun Ethernet Fabric Operating System. OSPFv3 Administration Guide
Sun Ethernet Fabric Operating System OSPFv3 Administration Guide Part No.: E25212-02 July 2012 Copyright 2010, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSPARC and Netra SPARC T5 Series Servers Administration Guide
SPARC and Netra SPARC T5 Series Servers Administration Guide Part No: E29502-10 August 2016 SPARC and Netra SPARC T5 Series Servers Administration Guide Part No: E29502-10 Copyright 2013, 2016, Oracle
More informationOracle Flash Accelerator F640 PCIe Card and Oracle 6.4 TB NVMe SSD Product Notes Release 1.0
Oracle Flash Accelerator F640 PCIe Card and Oracle 6.4 TB NVMe SSD Product Notes Release 1.0 Part No: E87232-03 February 2018 Oracle Flash Accelerator F640 PCIe Card and Oracle 6.4 TB NVMe SSD Product
More informationCreating and Administering Oracle Solaris 11.2 Boot Environments
Creating and Administering Oracle Solaris 11.2 Boot Environments Part No: E36803 July 2014 Copyright 2008, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationSun Storage F5100 Flash Array
Sun Storage F5100 Flash Array Product Notes Part No.: E21408-04 February 2012, Revision A Copyright 2009, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle Solaris Studio 12.4: IDE Quick Start Tutorial
Oracle Solaris Studio 12.4: IDE Quick Start Tutorial Part No: E37083 October 2014 Copyright 2013, 2014, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided
More informationOracle Integrated Lights Out Manager (ILOM) 3.1. Security Guide
Oracle Integrated Lights Out Manager (ILOM) 3.1 Security Guide Part No.: E24526-03 August 2013 Copyright 2012, 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation
More informationOracle Dual Port QDR InfiniBand Adapter M3. User s Guide
Oracle Dual Port QDR InfiniBand Adapter M3 User s Guide Part No.: E40987-01 September 2013 Copyright 2013, Oracle and/or its affiliates. All rights reserved. This software and related documentation are
More informationOracle X6 Series Servers Administration Guide
Oracle X6 Series Servers Administration Guide Part No: E65762-02 September 2017 Oracle X6 Series Servers Administration Guide Part No: E65762-02 Copyright 2016, 2017, Oracle and/or its affiliates. All
More informationIntroduction to Oracle Solaris 11 Networking
Introduction to Oracle Solaris 11 Networking Part No: E28986 01 October 2012 Copyright 2011, 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided
More informationNetra SPARC T4-2 Server. Product Notes
Netra SPARC T4-2 Server Product Notes Part No.: E21899-04 December 2012 Copyright 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license
More informationOracle Server Management Agents User's Guide
Oracle Server Management Agents User's Guide Part No: E52098-08 January 2017 Oracle Server Management Agents User's Guide Part No: E52098-08 Copyright 2014, 2017, Oracle and/or its affiliates. All rights
More informationOracle Integrated Lights Out Manager (ILOM) 3.1. Configuration and Maintenance Guide
Oracle Integrated Lights Out Manager (ILOM) 3.1 Configuration and Maintenance Guide Part No.: E24522-09 February 2014 Copyright 2012, 2014, Oracle and/or its affiliates. All rights reserved. This software
More informationOracle ILOM Protocol Management Reference SNMP and IPMI Firmware Release 4.0.x
Oracle ILOM Protocol Management Reference SNMP and IPMI Firmware Release 4.0.x Part No: E86151-01 August 2017 Oracle ILOM Protocol Management Reference SNMP and IPMI Firmware Release 4.0.x Part No: E86151-01
More informationSun Datacenter InfiniBand Switch 36 Product Notes for Firmware Version 2.2
Sun Datacenter InfiniBand Switch 36 Product Notes for Firmware Version 2.2 Part No: E76431-04 April 2017 Sun Datacenter InfiniBand Switch 36 Product Notes for Firmware Version 2.2 Part No: E76431-04 Copyright
More information