Port Usage Information for the IM and Presence Service
|
|
- Erica Webster
- 5 years ago
- Views:
Transcription
1 Port Usage Information for the Service Port usage overview, page 1 Information collated in table, page 1 service port list, page 2 Port usage overview This document provides a list of the and ports that the Service uses for intracluster connections and for communications with external applications or devices. It provides important information for the configuration of firewalls, Access Control Lists (ACLs), and quality of service (QoS) on a network when an IP Communications solution is implemented. Note Cisco has not verified all possible configuration scenarios for these ports. If you are having configuration problems using this list, contact Cisco technical support for assistance. While virtually all protocols are bidirectional, this document gives directionality from the session originator perspective. In some cases, the administrator can manually change the default port numbers, though Cisco does not recommend this as a best practice. Be aware that the Service opens several ports strictly for internal use. Ports in this document apply specifically to the Service. Some ports change from one release to another, and future releases may introduce new ports. Therefore, make sure that you are using the correct version of this document for the version of Service that is installed. Configuration of firewalls, ACLs, or QoS will vary depending on topology, placement of devices and services relative to the placement of network security devices, and which applications and telephony extensions are in use. Also, bear in mind that ACLs vary in format with different devices and versions. Information collated in table Table 1 defines the information collated in each of the tables in this document. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
2 service port list Port Usage Information for the Service Table 1: Definition of Table Information Table Heading To Role Description The client sending requests to this port The client receiving requests on this port A client or server application or process Either a Session-layer protocol used for establishing and ending communications, or an Application-layer protocol used for request and response transactions A -layer protocol that is connection-oriented () or connectionless () The port used for receiving requests The port used for sending requests service port list The following tables show the ports that the Service uses for intracluster and intercluster traffic. Table 2: Service Release 9.x Ports - SIP Proxy Requests () SIP Gateway SIP Gateway SIP / 5060 Default SIP Proxy and Listener SIP Gateway SIP TLS 5061 TLS Server Authentication listener port SIP TLS 5062 TLS Mutual Authentication listener port SIP / 5049 Internal port. Localhost traffic only. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 2 OL
3 Port Usage Information for the Service service port list () HTTP 8081 Used for HTTP requests from the Config Agent to indicate a change in configuration. Third-party Client HTTP 8082 Default HTTP Listener. Used for Third-Party Clients to connect Third-party Client HTTPS TLS / 8083 Default HTTPS Listener. Used for Third-Party Clients to connect Table 3: Service Release 9.x Ports - Engine Requests () ( Engine) SIP / 5070 Default SIP / Listener port ( Engine) ( Engine) Livebus Internal port. Localhost traffic only. LiveBus messaging port. The IM and Service uses this port for cluster communication. Table 4: Service Release 9.x Ports - Cisco Tomcat WebRequests () Browser HTTPS 8080 Used for web access Browser AXL / HTTPS TLS / 8443 Provides database and serviceability access via SOAP and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
4 service port list Port Usage Information for the Service () Browser HTTPS TLS / 8443 Provides access to Web administration Browser HTTPS TLS / 8443 Provides access to User option pages Browser SOAP TLS / 8443 Provides access to Cisco Unified Personal Communicator, Cisco Unified Mobility Advantage, and third-party API clients via SOAP Table 5: Service Release 9.x Ports - External Corporate Directory Requests () External Corporate Directory External Corporate Directory LDAP 389 Allows the Directory protocol to integrate with the external Corporate Directory. The LDAP port depends on the Corporate Directory (389 is the default). In case of Netscape Directory, customer can configure different port to accept LDAP traffic. External Corporate Directory LDAPS 636 Allows the Directory protocol to integrate with the external Corporate Directory. LDAP port depends on the Corporate Directory (636 is the default). and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 4 OL
5 Port Usage Information for the Service service port list Table 6: Service Release 9.x Ports - Configuration Requests () (Config Agent) (Config Agent) 8600 Config Agent heartbeat port Table 7: Service Release 9.x Ports - Certificate Manager Requests () Certificate Manager 7070 Internal port - Localhost traffic only Table 8: Service Release 9.x Ports - IDS Database Requests () (Database) (Database) 1500 Internal IDS port for Database clients. Localhost traffic only. (Database) (Database) 1501 Internal port - this is an alternate port to bring up a second instance of IDS during upgrade. Localhost traffic only. (Database) (Database) XML 1515 Internal port. Localhost traffic only. DB replication port and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
6 service port list Port Usage Information for the Service Table 9: Service Release 9.x Ports - IPSec Manager Requests () (IPSec) (IPSec) / Internal port - cluster manager port used by the ipsec_mgr daemon for cluster replication of platform data (hosts) certs Table 10: Service Release 9.x Ports - DRF Master Agent Server Requests () (DRF) (DRF) 4040 DRF Master Agent server port, which accepts connections from Local Agent, GUI, and CLI Table 11: Service Release 9.x Ports - RISDC Requests () (RIS) (RIS) 2555 Real-time Information Services (RIS) database server. Connects to other RISDC services in the cluster to provide clusterwide real-time information (RTMT/AMC/ SOAP) (RIS) 2556 Real-time Information Services (RIS) database client for Cisco RIS. Allows RIS client connection to retrieve real-time information and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 6 OL
7 Port Usage Information for the Service service port list () (RIS) (RIS) Internal port. Localhost traffic only. Used by RISDC (System Access) to link to servm via for service status request and reply Table 12: Service Release 9.x Ports - SNMP Requests () SNMP Server SNMP 161, 8161 Provides services for SNMP-based management applications SNMP 6162 Native SNMP agent that listens for requests forwarded by SNMP master agents SNMP 6161 SNMP Master agent that listens for traps from the native SNMP agent, and forwards to management applications SNMP Server 7999 Used as a socket for the cdp agent to communicate with the cdp binary 7161 Used for communication between the SNMP master agent and subagents SNMP Trap Monitor SNMP 162 Sends SNMP traps to management applications SNMP Configurable Internal SNMP trap receiver and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
8 service port list Port Usage Information for the Service Table 13: Service Release 9.x Ports - Racoon Server Requests () Gateway Gateway Ipsec 500 Enables Internet Security Association and the Key Management Table 14: Service Release 9.x Ports - System Service Requests () (RIS) (RIS) XML 8888 and 8889 Internal port. Localhost traffic only. Used to listen to clients communicating with the RIS Service Manager (servm). Table 15: Service Release 9.x Ports - DNS Requests () DNS Server DNS 53 The port that DNS server listen on for DNS queries. To: DNS Server : Table 16: Service Release 9.x Ports - SSH/SFTP Requests () Endpoint SSH / SFTP 22 Used by many applications to get command line access to the server. Also used between nodes for certificate and other file exchanges (sftp) and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 8 OL
9 Port Usage Information for the Service service port list Table 17: Service Release 9.x Ports - ICMP Requests () Cisco Unified Communications Manager Cisco Unified Communications Manager ICMP IP Not Applicable Internet Control Message (ICMP). Used to communicate with the Cisco Unified Communications Manager server Table 18: Service Release 9.x Ports - NTP Requests () NTP Server NTP 123 Cisco Unified Communications Manager is the acting NTP server. Used by subscriber nodes to synchronize time with the publisher node. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
10 service port list Port Usage Information for the Service Table 19: Service Release 9.x Ports - Microsoft Exchange Notify Requests () Microsoft Exchange HTTP (HTTPu) ) WebDAV - HTTP //IP notifications 2) EWS - HTTP/ /IP SOAP notifications server port (default 50020) Microsoft Exchange uses this port to send notifications (using NOTIFY message) to indicate a change to a particular subscription identifier for calendar events. Used to integrate with any Exchange server in the network configuration. Both ports are created. The kind of messages that are sent depend on the type of Calendar Backend gateway(s) that are configured. Table 20: Service Release 9.x Ports - SOAP Services Requests () (Tomcat) (SOAP) 5007 SOAP monitor port Table 21: Service Release 9.x Ports - AMC RMI Requests () RTMT 1090 AMC RMI Object port. Cisco AMC Service for RTMT performance monitors, data collection, logging, and alerting. RTMT 1099 AMC RMI Registry port. Cisco AMC Service for RTMT performance monitors, data collection, logging, and alerting. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 10 OL
11 Port Usage Information for the Service service port list Table 22: Service Release 9.x Ports - XCP Requests () XMPP Client 5222 Client access port 5269 Server to Server connection (S2S) port Third-party BOSH client 7335 HTTP listening port used by the XCP Web Connection Manager for BOSH third-party API connections (XCP Services) (XCP Router 7400 XCP Router Master Accept Port. XCP services that connect to the router from an Open Port Configuration (for example XCP Authentication Component Service) typically connect on this port. (XCP Router (XCP Router 5353 MDNS port. XCP routers in a cluster use this port to discover each other. Table 23: Service Release 9.x Ports - External Database (PostgreSQL) Requests () PostgreSQL database PostgreSQL database listening port 1 This is the default port, however you can configure the PostgreSQL database to listen on any port. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
12 service port list Port Usage Information for the Service Table 24: Service Release 9.x Ports - High Availability Requests () (Server Recovery Manager) (Server Recovery Manager) The port that Cisco Server Recovery Manager uses to provide admin rpc requests. (Server Recovery Manager) (Server Recovery Manager) The port that Cisco Server Recovery Manager uses to communicate with its peer. Table 25: Service Release 9.x Ports - In Memory Database Replication Messages () 9003 Cisco Datastore dual node subcluster replication Cisco Login Datastore dual node subcluster replication Cisco SIP Registration Datastore dual node subcluster replication. Table 26: Service Release 9.x Ports - In Memory Database SQL Messages () 6603 Cisco Datastore SQL Queries Cisco Login Datastore SQL Queries Cisco SIP Registration Datastore SQL Queries. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 12 OL
13 Port Usage Information for the Service service port list () 6606 Cisco Route Datastore SQL Queries. Table 27: Service Release 9.x Ports - In Memory Database Notification Messages () 6607 Cisco Datastore XML-based change notification Cisco Login Datastore XML-based change notification Cisco SIP Registration Datastore XML-based change notification Cisco Route Datastore XML-based change notification. See the Cisco Unified Serviceability Administration Guide for information about SNMP. and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) OL
14 service port list Port Usage Information for the Service and Port Usage Guide for Cisco Unified Communications Manager, Release 9.1(1) 14 OL
Port Usage Information for the IM and Presence Service
Port Usage Information for the Service Service Port Usage Overview, on page 1 Information Collated in Table, on page 1 Service Port List, on page 2 Service Port Usage Overview This document provides a
More informationTCP and UDP Port Usage Guide for Cisco Unified Communications Manager, Release 10.0(1)
and UDP Port Usage Guide for Cisco, Release 10.0(1) First Published: December 03, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel:
More informationCisco Unified Communications Manager TCP and UDP Port
Cisco TCP and UDP Port Usage This chapter provides a list of the TCP and UDP ports that Cisco uses for intracluster connections and for communication with external applications or devices. You will also
More informationCisco Unified Communications Manager TCP and UDP Port
Cisco TCP and UDP Port Usage This chapter provides a list of the TCP and UDP ports that Cisco uses for intracluster connections and for communication with external applications or devices. You will also
More informationPort Utilization in Finesse
Utilization in Finesse Utilization Table Columns, page 1 Finesse Utilization, page 2 Utilization Table Columns The columns in the port utilization tables in this document describe the following: A value
More informationUnderstanding Feature and Network Services in Cisco Unified Serviceability
CHAPTER 10 Understanding Feature and Network Services in Cisco Unified Serviceability May 19, 2009 Cisco Unified Serviceability service management includes working with feature and network services and
More informationIP Communications Required by Cisco Unity Connection
IP Communications Required by Cisco Unity IP Communications Required by Cisco Unity, page 1 IP Communications Required by Cisco Unity Ports Table 1: TCP and UDP Ports Used for Inbound s to Cisco Unity
More informationPost-Change Task List
CHAPTER 5 November 20, 2013 Complete this procedure after you finish changing the IP address or hostname of your cluster. Procedure Step 1 Step 2 Ensure that all servers in the cluster are running and
More informationMultinode Scalability and WAN Deployments
Multinode Scalability Feature, page 1 Cluster-Wide DNS SRV, page 3 Local Failover, page 3 Subcluster Failure Detection, page 3 Method Event Routing, page 4 External Database Recommendations, page 4 Clustering
More informationPort Utilization Guide for Cisco Unified Contact Center Express Solutions, Release 11.5(1)
Utilization Guide for Cisco Unified Contact Center Express Solutions, Release 11.5(1) First Published: 2016-08-10 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706
More informationIntercluster Peer Configuration
Prerequisites for Intercluster Deployment, page 1, page 2 Prerequisites for Intercluster Deployment You configure an intercluster peer between the IM and Presence database publisher nodes in standalone
More informationCisco Prime Collaboration Deployment Configuration and Administration
Cisco Prime Collaboration Deployment Configuration and Administration Services, page 1 Limitations and Restrictions, page 5 Services After the installation of the Cisco Prime Collaboration Deployment platform,
More informationPre-Change Tasks and System Health Checks
Pre-Change Task List for Cisco Unified Communications Manager Nodes, page 1 Pre-Change Task List for IM and Presence Service Nodes, page 2 System Health Checks, page 4 Pre-Change Setup, page 6 Pre-Change
More informationPost-Change Tasks and Verification
Post-Change Task List for Cisco Unified Communications Manager Nodes, page 1 Post-Change Task List for IM and Presence Service Nodes, page 3 Perform Post-Change Tasks for Cisco Unified Communications Manager
More informationHigh CPU and virtual memory issues
Monitor high CPU and virtual memory issues using Unified Operations Manager, page 1 Monitor high CPU and virtual memory issues using Unified RTMT, page 1 High CPU issues, page 2 High virtual memory issues,
More informationConfigure Centralized Deployment
Centralized Deployment Overview, on page 1 Centralized Deployment Prerequisites, on page 4 Centralized Deployment Configuration Task Flow, on page 6 Centralized Deployment Field Descriptions, on page 16
More informationIM and Presence Service Network Setup
Configuration changes and service restart notifications, page 1 DNS Domain Configuration, page 2 IM and Presence Service Default Domain Configuration, page 6 IM Address Configuration, page 7 Domain Management
More informationConfiguration and Administration of IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1)
Configuration and Administration of IM and Presence Service on Cisco Unified Communications Manager, Release 9.1(1) First Published: April 09, 2014 Last Modified: August 22, 2014 Americas Headquarters
More informationTrace. Trace. Trace, page 1 Configure trace, page 4
, page 1 Configure trace, page 4 Cisco Unified Serviceability provides trace tools to assist you in troubleshooting issues with your voice application. Cisco Unified Serviceability supports SDI (System
More informationConfiguration and Administration of IM and Presence Service on Cisco Unified Communications Manager, Release 11.5(1)
Configuration and Administration of IM and Presence Service on Cisco Unified Communications Manager, Release 11.5(1) First Published: 2016-06-08 Last Modified: 2018-02-21 Americas Headquarters Cisco Systems,
More informationIP Communications Required by the Cisco TelePresence Exchange System
APPENDIXF IP Communications Required by the Cisco TelePresence Exchange System Added July 19, 2012 This appendix contains the following sections: Firewall and Access List Considerations, page F-1 Ports
More informationIM and Presence Service Configuration for SIP Federation
IM and Presence Service Configuration for SIP Federation IM and Presence Service Release 9.0 or later supports interdomain federation with Microsoft Lync. For IM and Presence Service Release 9.0 or later,
More informationCisco ISE Ports Reference
Cisco ISE Infrastructure, page 1 Cisco ISE Administration Node Ports, page 2 Cisco ISE Monitoring Node Ports, page 3 Cisco ISE Policy Service Node Ports, page 4 Cisco ISE pxgrid Service Ports, page 8 OCSP
More informationServices. Service descriptions. Cisco HCS services
Service descriptions, page 1 Infrastructure Platform Automation Description, page 5 Infrastructure Manager Sync Introduction, page 5 Service descriptions After the installation of the Cisco HCM-F platform,
More informationCisco ISE Ports Reference
Cisco ISE Infrastructure, page 1 Cisco ISE Administration Node Ports, page 2 Cisco ISE Monitoring Node Ports, page 4 Cisco ISE Policy Service Node Ports, page 5 Cisco ISE pxgrid Service Ports, page 10
More informationChange Server Domain
CHAPTER 6 Procedure Overview, page 6-1 Procedure Workflow, page 6-2 Update DNS Records, page 6-3 Update Cisco Unified Presence Node Name, page 6-5 Update DNS Domain, page 6-6 Reboot all Servers in Cluster
More informationCisco ISE Ports Reference
Cisco ISE Infrastructure Cisco ISE Infrastructure, on page 1 Cisco ISE Administration Node Ports, on page 2 Cisco ISE Monitoring Node Ports, on page 4 Cisco ISE Policy Service Node Ports, on page 5 Inline
More informationCisco ISE Ports Reference
Cisco ISE Infrastructure Cisco ISE Infrastructure, on page 1 Cisco ISE Administration Node Ports, on page 2 Cisco ISE Monitoring Node Ports, on page 4 Cisco ISE Policy Service Node Ports, on page 6 Cisco
More informationTECHNICAL WHITE PAPER. Avaya SIP Enablement Services (SIP) 3.0 / Ports and Protocols
TECHNICAL WHITE PAPER Services (SIP) 3.0 / Version: 0.6 Date: Aug. 12, 2005 Author: Avaya GCS Abstract: This technical white paper covers the network ports and protocols used by the Avaya Converged Communications
More informationConfiguring Trace. Configuring Trace Parameters CHAPTER
CHAPTER 7 Note Enabling trace decreases system performance; therefore, enable trace only for troubleshooting purposes. For assistance in using trace, contact your technical support team. This chapter contains
More informationInstallation. Installation Overview. Installation and Configuration Taskflows CHAPTER
CHAPTER 4 Overview, page 4-1 Navigate the Wizard, page 4-7 Install and Configure Cisco Unified Presence, page 4-7 Perform a Fresh Multi-Node, page 4-15 Overview Cisco Unified Presence supports the following
More informationRead the following information carefully, before you begin an upgrade.
Read the following information carefully, before you begin an upgrade. Review Supported Upgrade Paths, page 1 Review Time Taken for Upgrade, page 1 Review Available Cisco APIC-EM Ports, page 2 Securing
More informationPort Utilization in Unified CVP
Utilization in Unified CVP Utilization Table Columns, page 1 Unified CVP Utilization, page 2 Utilization Table Columns The columns in the port utilization tables in this document describe the following:
More informationInterdomain Federation Guide for IM and Presence Service on Cisco Unified Communications Manager, Release 11.5(1)SU2
Interdomain Federation Guide for IM and Presence Service on Cisco Unified Communications Manager, Release 11.5(1)SU2 First Published: 2017-11-29 Last Modified: 2017-12-01 Americas Headquarters Cisco Systems,
More informationHigh Availability Deployment Configuration
High Availability Deployments, page 1 Turn On or Off High Availability for Subcluster, page 5 Configure Advanced Service Parameters for Server Recovery Manager, page 7 Perform Manual Failover to Backup
More informationConfiguration and Administration for the IM and Presence Service, Release 11.5(1)SU5
Configuration and Administration for the IM and Presence Service, Release 11.5(1)SU5 First Published: 2018-06-29 Last Modified: 2018-09-24 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive
More informationTVOICE: Troubleshooting Cisco Unified Communications v8
Course Objectives Describe a systematic methodology to troubleshoot Cisco Unified Communications solutions Isolate and troubleshoot reported issues that relate to Cisco Unified Communications Manager.
More informationCisco Unified CM Trace
Cisco Unified CM Trace Trace, page 1 Configure trace, page 4 Set up troubleshooting trace settings, page 20 Trace Cisco Unified Serviceability provides trace tools to assist you in troubleshooting issues
More informationConfigure the IM and Presence Service
IM and Presence Calendar Integration Task Flow, page 1 IM and Presence Calendar Integration Task Flow Complete these tasks on the IM and Presence Service to set up calendar integration with Microsoft Outlook
More informationTrace Field Descriptions
APPENDIXC Trace Field s May 19, 2009 For some services, you can activate trace for specific components, instead of enabling all trace for the service. The following list includes the services for which
More informationUnified Communications Manager FAQ
Unified Communications Manager FAQ Document ID: 111900 Contents Introduction Is it possible to control the quota for outside calls with Cisco Unified Communications Manager? How many calls can be handled
More informationGeneral performance monitoring for IM and Presence service
General performance monitoring for IM and Presence service This appendix provides information on some of the more important counters that you can monitor for IM and Presence service. These counters provide
More informationCisco Unified Communications Manager configuration for integration with IM and Presence Service
Cisco Unified Communications Manager configuration for integration with IM and Presence Service User and Device Configuration on Cisco Unified Communications Manager before Integration Task List, page
More informationCAPPS: Implementing Cisco Collaboration Applications v1
Course Objectives Implement Cisco Unity Connection in a Cisco Unified Communications Manager deployment Describe how to implement Cisco Unity Express in a Cisco Unified Communications Manager Express deployment
More informationCISCO EXAM QUESTIONS & ANSWERS
CISCO 642-263 EXAM QUESTIONS & ANSWERS Number: 642-263 Passing Score: 800 Time Limit: 120 min File Version: 46.6 http://www.gratisexam.com/ CISCO 642-263 EXAM QUESTIONS & ANSWERS Exam Name: Implementing
More informationCCNA Voice. Unified Communications Overview.
CCNA Voice Unified Communications Overview www.ine.com Cisco UC Components Unified Call Control Cisco Unified Communications Manager Cisco Unified Communications Manager Express Unified Messaging Cisco
More informationMobile and Remote Access Through Cisco Expressway
Mobile and Remote Access Through Cisco Expressway Deployment Guide First Published: April 2014 Last Updated: April 2016 Cisco Expressway X8.7 Cisco Unified CM 9.1(2)SU1 or later Cisco Systems, Inc. www.cisco.com
More informationInterdomain Federation for the IM and Presence Service, Release 10.x
First Published: 2014-01-29 Last Modified: 2018-11-05 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387)
More informationCisco Unified Communications XMPP Federation
Cisco Unified Communications XMPP Federation Deployment Guide First Published: December 2014 Last Updated: March 2018 Cisco Expressway X8.10 IM and Presence Service 9.1.1 or later Cisco Systems, Inc. www.cisco.com
More informationCISCO UNIFIED COMMUNICATIONS MANAGER 7.0 TCP AND UDP PORT USAGE
WHITE PAPER REV1.0 CISCO UNIFIED COMMUNICATIONS MANAGER 7.0 AND PORT USAGE This document provides a list of the and ports that Cisco Communications Manager (formerly Cisco CallManager) 7.0 uses for intracluster
More informationManage Certificates. Certificates Overview
Certificates Overview, page 1 Show Certificates, page 3 Download Certificates, page 4 Install Intermediate Certificates, page 4 Delete a Trust Certificate, page 5 Regenerate a Certificate, page 6 Upload
More informationINDEX. call forwarding
INDEX A access control general concepts 1-17 GUI configuration 2-4 manual configuration B-19 access control lists (ACLs) 1-16 access log 1-11, 1-12 accounting services basic concepts 1-11, 1-12 GUI configuration
More informationConfiguring Cisco Unified Presence for Integration with Microsoft Exchange Server
CHAPTER 4 Configuring Cisco Unified Presence for Integration with Microsoft Exchange Server Revised: November 30, 2012 Configuring the Presence Gateway on Cisco Unified Presence for Microsoft Exchange
More informationRequired Ports for Cisco Prime Collaboration
The following tables lists the required ports for the Cisco Prime Collaboration Assurance and Cisco Prime Collaboration Provisioning servers to communicate with the devices. Ports Used by Prime Collaboration
More informationCisco Exam. Volume: 223 Questions. Question No: 1 Which three commands can be used to harden a switch? (Choose three.)
Volume: 223 Questions Question No: 1 Which three commands can be used to harden a switch? (Choose three.) A. switch(config-if)# spanning-tree bpdufilter enable B. switch(config)# ip dhcp snooping C. switch(config)#
More informationOverview of this Integration
CHAPTER 1 June 18, 2013 Basic Federated Network, page 1-1 About SIP Federation with AOL, page 1-4 About Intercluster and Multi-node Deployments, page 1-5 High Availability for SIP Federation, page 1-7
More informationLDAP Directory Integration
LDAP Server Name, Address, and Profile Configuration, on page 1 with Cisco Unified Communications Manager Task List, on page 1 for Contact Searches on XMPP Clients, on page 6 LDAP Server Name, Address,
More informationDisaster Recovery System Overview
Disaster Recovery System, page 1 Supported Features and Components, page 2 System Requirements, page 2 Master Agent, page 4 Local Agents, page 4 Log In to Disaster Recovery System, page 5 Disaster Recovery
More informationLDAP Directory Integration
LDAP Server Name, Address, and Profile Configuration, page 1 with Cisco Unified Communications Manager Task List, page 1 for Contact Searches on XMPP Clients, page 6 LDAP Server Name, Address, and Profile
More informationConfigure Service Parameters
Service Parameters Overview, page 1 Service Parameters Configuration Task Flow, page 1 Service Parameters Overview Each Cisco Unified Communications Manager node has a list of services that are available
More informationCisco TelePresence Video Communication Server
Cisco TelePresence Video Communication Server Administrator Guide D14049.09 December 2010 Software version: X6 Contents Contents Contents 2 About the Cisco TelePresence Video Communication Server (Cisco
More informationSIMPLE (SIP for Instant Messaging and Presence Leveraging Extensions Used by CM-IMP. XMPP (extensible Messaging and Presence Protocol) Used by CM-IMP
Rev. 20170312.203116 14. IM and Presence c cnac o okbook.com C M - I M P CM-IMP (cisco Communications Manager IM and Presence server) Tightly integrated with CUCM. Extends the presence capabilities native
More informationCustomer Network to Cisco WebEx Cloud IP Ranges for Firewall Settings
Cisco_Unified_MeetingPlace,_Release_7.1 Network_Requirements Main page: Cisco Unified MeetingPlace, Release 7.1 Previous page: System Requirements Contents 1 Customer Network to Cisco WebEx Cloud IP Ranges
More informationQ&As. Implementing Cisco Collaboration Devices v1.0. Pass Cisco Exam with 100% Guarantee
210-060 Q&As Implementing Cisco Collaboration Devices v1.0 Pass Cisco 210-060 Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: 100% Passing Guarantee 100% Money Back
More informationUnified Communications Mobile and Remote Access via Cisco VCS
Unified Communications Mobile and Remote Access via Cisco VCS Deployment Guide Cisco VCS X8.5.2 Cisco Unified CM 9.1(2)SU1 or later April 2015 Contents Mobile and remote access overview 5 Jabber client
More informationUnified Communications Mobile and Remote Access via Cisco Expressway
Unified Communications Mobile and Remote Access via Cisco Expressway Deployment Guide Cisco Expressway X8.5.3 Cisco Unified CM 9.1(2)SU1 or later June 2015 Contents Mobile and remote access overview 5
More informationPort Utilization Guide for Cisco Unified Contact Center Solutions, Release 11.0(1)
Utilization Guide for Cisco Unified Contact Center Solutions, Release 11.0(1) First Published: 2015-08-26 Last Modified: 2016-01-25 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose,
More informationInterdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 10.5(1)
Interdomain Federation for IM and Presence Service on Cisco Unified Communications Manager, Release 10.5(1) First Published: 2014-01-29 Last Modified: 2017-12-01 Americas Headquarters Cisco Systems, Inc.
More informationSecure External Phone Services Configuration Example
Secure External Phone Services Configuration Example Contents Introduction Prerequisites Requirements Components Used Configuration Steps Frequent Ask Questions (FAQ) Troubleshooting Introduction This
More informationUnified Communications Mobile and Remote Access via Cisco Expressway
Unified Communications Mobile and Remote Access via Cisco Expressway Deployment Guide Cisco Expressway X8.1.1 or later Cisco Unified CM 9.1(2)SU1 or later D15068.01 April 2014 Contents Mobile and remote
More informationManaging Cisco Unity Connection Services
Cisco Unity Connection s, on page 1 Managing s in Control Center, on page 4 Cisco Unity Connection s Cisco Unity Connection has the services described in Table 1: Unity Connection s. Table 1: Unity Connection
More informationCisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Cisco 300-075 Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) https://killexams.com/pass4sure/exam-detail/300-075 QUESTION: 90 An engineer is configuring a new DX-80 in Cisco Unified Communications
More informationcisco. Number: Passing Score: 800 Time Limit: 120 min.
500-006 cisco Number: 500-006 Passing Score: 800 Time Limit: 120 min Question Set 1 QUESTION 1 How many conferencing bridges can a single full-capacity Cisco TelePresence Conductor support? A. 1 B. 10
More informationSimple Network Management Protocol
This chapter gives an overview of (SNMP). Overview, page 1 SNMP Versioning, page 2 SNMP and Cisco Unified CM Basics, page 3 SNMP Limits, page 4 SNMP Basic Commands, page 4 SNMP Community Strings and Users,
More informationVendor: Cisco. Exam Code: Exam Name: Integrating Cisco Unified Communications Applications v8.0 (CAPPS v8.
Vendor: Cisco Exam Code: 642-467 Exam Name: Integrating Cisco Unified Communications Applications v8.0 (CAPPS v8.0) Version: Demo QUESTION 1 When users try to access the voice-mail system, they hear a
More informationSAML-Based SSO Solution
About SAML SSO Solution, page 1 Single Sign on Single Service Provider Agreement, page 2 SAML-Based SSO Features, page 2 Basic Elements of a SAML SSO Solution, page 3 Cisco Unified Communications Applications
More informationPush Notifications (On-Premises Deployments)
Push Notifications Overview, page 1 Push Notifications Prerequisites, page 5 Push Notifications Configuration Task Flow, page 6 Push Notifications Troubleshooting, page 15 Push Notifications Interactions
More informationCisco Unified CM Disaster Recovery System
Cisco Unified CM Disaster Recovery System Disaster Recovery System, page 1 Quick-reference tables for backup and restore procedures, page 3 Supported features and components, page 5 System requirements,
More informationInternet Protocol Version 6 (IPv6)
This chapter provides information about Internet Protocol version 6 (IPv6), which is the latest version of the Internet Protocol (IP). Packets are used to exchange data, voice, and video traffic over dual-stack
More informationMONitoring Agents using a Large Integrated Services Architecture. Iosif Legrand California Institute of Technology
MONitoring Agents using a Large Integrated s Architecture California Institute of Technology Distributed Dynamic s Architecture Hierarchical structure of loosely coupled services which are independent
More informationTLS Setup. TLS Overview. TLS Prerequisites
Setup Overview, page 1 Prerequisites, page 1 Configuration Task Flow, page 2 Interactions and Restrictions, page 8 Overview Transport Layer Security () provides secure and reliable signaling and data transfer
More informationCISCO UNIFIED CALLMANAGER 5.0 TCP AND UDP PORT USAGE
WHITE PAPER REV2.0 CISCO UNIFIED CALLMANAGER 5.0 AND PORT USAGE This document provides a list of the and ports that Cisco CallManager 5.0 uses for intracluster connections and for communications with external
More informationMicrosoft Architecting Microsoft Azure Solutions.
Microsoft 70-535 Architecting Microsoft Azure Solutions https://killexams.com/pass4sure/exam-detail/70-535 QUESTION: 106 Your organization has developed and deployed several Azure App Service Web and API
More informationIT Exam Training online / Bootcamp
DumpCollection IT Exam Training online / Bootcamp http://www.dumpcollection.com PDF and Testing Engine, study and practice Exam : 642-445 Title : Cisco IP Telephony for Release 5.x Vendors : Cisco Version
More informationPort Utilization in Contact Center Enterprise
Utilization Table Columns, page 1, page 2 Unified CCMP Utilization, page 15 Unified CRM Connectors Utilization, page 18 (CAD) Utilization, page 19 Cisco Voice Integration to Genesys Call Center, page 23
More informationIntegration Troubleshooting
IM and Presence Service Tracing, page 1 Microsoft Server SIP Tracing, page 4 Common Integration Problems, page 5 User Migration Troubleshooting, page 12 IM and Presence Service Tracing On the IM and Presence
More informationWith standard audit logging, configuration changes to the system get logged in separate log files for auditing.
, on page 1 With audit logging, configuration changes to the system get logged in separate log files for auditing. Audit Logging (Standard) When audit logging is enabled, but the detailed audit logging
More informationAvaya Port Matrix: Avaya Aura Performance Center 7.1
Avaya Port Matrix: Avaya Aura Performance Center 7.1 Issue 1.0 November 2014 1 ALL INFORMATION IS BELIEVED TO BE CORRECT AT THE TIME OF PUBLICATION AND IS PROVIDED "AS IS". AVAYA INC. DISCLAIMS ALL WARRANTIES,
More informationConfiguring MWTM to Run with Various Networking Options
APPENDIXH Configuring MWTM to Run with Various Networking Options In addition to running on standard IP-connected networks, the Cisco Mobile Wireless Transport Manager (MWTM) has the flexibility to adapt
More informationPreinstallation Requirements Guide
Preinstallation Requirements Guide Synergy Manage v4.12 September 2018 Synergy SKY 2018 TOC 1: Introduction 3 Synergy Manage install procedure - your responsibilities 3 Further information about Synergy
More informationNETCONF Protocol. Restrictions for the NETCONF Protocol. Information About the NETCONF Protocol
Restrictions for the, on page 1 Information About the, on page 1 How to Configure the, on page 4 Verifying the Configuration, on page 7 Additional References for, on page 9 Feature Information for, on
More informationPort Utilization in SocialMiner
Utilization in Utilization Table Columns, page 1 Utilization, page 2 Utilization Table Columns The columns in the port utilization tables in this document describe the following: A value representing the
More informationHP0-Y13. ProCurve Network Management. Download Full Version :
HP HP0-Y13 ProCurve Network Management Download Full Version : https://killexams.com/pass4sure/exam-detail/hp0-y13 Answer: B, D QUESTION: 115 Which protocol does the Ping Sweep phase of PCM discovery use
More informationManaging CPS vdra Cluster
Accessing CPS vdra Management CLI, page 1 Starting CPS vdra Cluster, page 3 Stopping Application Services In CPS vdra Cluster, page 4 Starting Services In CPS vdra Cluster, page 4 Stopping External Services
More informationCisco Unified Presence 8.0
Cisco Unified Presence 8.0 Cisco Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks, enabling easy collaboration every time from any workspace.
More informationNetApp Element Plug-in for vcenter Server User Guide
NetApp Element Plug-in for vcenter Server User Guide Version 4.2 November 2018 215-13259_A0 doccomments@netapp.com Table of Contents 3 Contents About this guide... 8 vcenter Plug-in overview... 9 Network
More informationDisaster Recovery System Administration Guide for Cisco Unified Communications Manager Release 8.0(2)
Disaster Recovery System Administration Guide for Cisco Unified Communications Manager Release 8.0(2) Published: April 2, 2010 This guide provides an overview of the Disaster Recovery System, describes
More informationReal-Time Monitoring. Installation and Configuration
The Cisco Unified Tool (RTMT), which runs as a client-side application, uses HTTPS and TCP to monitor system performance. Unified RTMT can connect directly to devices through HTTPS to troubleshoot system
More informationConfiguring Cisco TelePresence Manager
CHAPTER 3 Revised: February 25, 2009, First Published: November 27, 2006 Contents Introduction, page 3-3 Security Settings, page 3-3 Generating Security Certificate Reports, page 3-4 Viewing Security Certificates,
More informationBackup and Restore. Cisco Unified Contact Center Express Operations Guide, Release 10.0(1) 1
Cisco Disaster Recovery System (Cisco DRS), which you can access from Cisco Unified Contact Center Express Administration, provides complete data backup-and-restore capabilities for all servers in a Cisco
More information