Vendor: Cisco. Exam Code: Exam Name: CCIE Routing and Switching Written v5.0. Version: Demo

Size: px

Start display at page:

Download "Vendor: Cisco. Exam Code: Exam Name: CCIE Routing and Switching Written v5.0. Version: Demo"

Marshall McCarthy
5 years ago
Views:

1 Vendor: Cisco Exam Code: Exam Name: CCIE Routing and Switching Written v5.0 Version: Demo

It enables NetFlow switching on interface FastEthernet0/0 D.

2 DEMO QUESTION 1 Which two options are effects of the given configuration? (Choose two) A. It enables Cisco Express Forwarding on interlace FastEthernet0/0 B. It sets the data export destination to on UDP port C. It enables NetFlow switching on interface FastEthernet0/0 D. It configures the export process to include the BGP peer AS of the router gathering the data E. It sets the data export destination to on TCP port Correct Answer: BC QUESTION 2 Drag and drop the OTV component on the left to the function it performs on the right. Select and Place: Correct Answer:

QUESTION 3 Which two statements about the BGP community attribute are true? (Choose two.) A. Routers send the community attribute to all BGP neighbors automatically. B. A router can change a received community attribute before advertising it to peers.

3 QUESTION 3 Which two statements about the BGP community attribute are true? (Choose two.) A. Routers send the community attribute to all BGP neighbors automatically. B. A router can change a received community attribute before advertising it to peers. C. It is a well-known, discretionary BGP attribute. D. It is an optional transitive BGP attribute. E. A prefix can support only one community attribute. Correct Answer: BD QUESTION 4 In which type of EIGRP configuration is EIGRP IPv6 VRF-Lite available? A. stub B. named mode C. classic mode D. passive Correct Answer: B QUESTION 5 Which option describes a limitation of Embedded Packet Capture? A. It can capture data only on physical interfaces and subinterfaces. B. It can store only packet data. C. It can capture multicast packets only on ingress. D. It can capture multicast packets only on egress. Correct Answer: C QUESTION 6 Which three capabilities are provided by MLD snooping? (Choose three.) A. dynamic port learning

4 B. IPv6 multicast router discovery C. user-configured ports age out automatically D. a 5-minute aging timer E. flooding control packets to the egress VLAN F. a 60-second aging timer Correct Answer: ABD QUESTION 7 Which two statements about OSPF route filtering are true? (Choose two) A. It can be based on the source router ID. B. It can be based on the external route tag. C. It affects LSA flooding. D. It can be based on the as-path. E. It can be based on distance. Correct Answer: AB QUESTION 8 Which two statements about the max-age time in IS-IS are true? (Choose two.) A. The IS-IS max-age time is 20 minutes by default. B. The IS-IS max-age time is 60 minutes by default. C. The IS-IS max-age time increments from zero to max-age. D. The IS-IS max-age time decrements from max-age to zero. Correct Answer: AD QUESTION 9 Which BGP feature allows R1 to instruct R2 which prefixes it is allowed to advertise to R1? A. route refresh B. Prefix-Based Outbound Route Filtering C. distribute lists D. prefix lists Correct Answer: B QUESTION 10 Which two statements about IGPs are true? (Choose Two) A. RIPv2 and IS-IS calculate the metric of a link based on the bandwidth of a link. B. OSPF and IS-IS are classless protocols. C. OSPF and EIGRP have high resource usage.

5 D. RiPv2 and EIGRP support VLSM. E. RIPv2 and OSPF are distance vector protocols. F. IS-IS and EIGRP are link-state protocols. Correct Answer: BD QUESTION 11 Which two statements about PIM-DM are true? (Choose two.) A. It forwards multicast packets on a source tree. B. It requires an RP. C. It forwards multicast packets on a shared distribution tree. D. It floods multicast packets to neighbors that have requested the data. E. It floods multicast packets throughout the network. F. It forwards multicast packets to neighbors that have requested the data. Correct Answer: AE QUESTION 12 External EIGRP route exchange on routers R1 and R2 was failing because the routers had duplicate router IDs. You changed the eigrp router-id command on R1, but the problem persists. Which additional action must you take to enable the routers to exchange routes? A. Change the corresponding loopback address. B. Change the router ID on R2. C. Reset the EIGRP neighbor relationship. D. Clear the EIGRP process. Correct Answer: D QUESTION 13 Which statement about NAT64 is true? A. NAT64 provides address family translation and translates IPv4 to IPv6 and IPv6 to IPv4. B. NAT64 provides address family translation and can translate only IPv6 to IPv4. C. NAT64 should be considered as a permanent solution. D. NAT64 requires the use of DNS64. Correct Answer: A QUESTION 14

Which two actions can you take to enable CE-1 at site A to access the Internet? (Choose two.) A. Create a default route for site A on PE-1 with the next hop set to the PE-2 interface to the Internet.

6 Which two actions can you take to enable CE-1 at site A to access the Internet? (Choose two.) A. Create a default route for site A on PE-1 with the next hop set to the PE-2 interface to the Internet. B. Originate a default route in site B with the next hop set to the PE-2 Internet interface, and import the default route into site A. C. Create a default route on CE-1 with the next hop set to the PE-1 upstream interface. D. Originate a default route in site A with the next hop set to the PE-2 interface to CE-1. E. Create a static default route on CE-1 with the next hop set to the PE-2 interface to the Internet. Correct Answer: AB QUESTION 15

Which statement is true? A. The output shows an IPv6 multicast address with link-local scope. B. The output shows an IPv6 multicast address that is used for unique local sources only. C.

7 Which statement is true? A. The output shows an IPv6 multicast address with link-local scope. B. The output shows an IPv6 multicast address that is used for unique local sources only. C. The output shows an IPv6 multicast address that can be used for BIDIR-PIM only. D. The output shows an IPv6 multicast address with embedded RP. Correct Answer: D QUESTION 16 Refer to the Exhibit. If R1 uses EIGRP to learn route /24 from R2. Which interface on R1 uses split horizon for route /24? A. F a0/1 B. F a0/0 C. Se0/0 D. Se1/0 Correct Answer: B QUESTION 17 Which two Cisco IOS AAA features are available with the local database? (Choose two.) A. command authorization B. network access authorization C. network accounting D. network access authentication Correct Answer: AD QUESTION 18 Which two options are two characteristics of the HSRPv6 protocol? (Choose two.) A. It uses virtual MAC addresses a through a0.0fff. B. It uses UDP port number C. It uses virtual MAC addresses a through a0.ffff. D. It uses UDP port number E. If a link local IPv6 address is used, it must have a prefix. Correct Answer: AB

8 QUESTION 19 According to RFC 4577, OSPF for BGP/MPLS IP VPNs, when must the down bit be set? A. when an OSPF route is distributed from the PE to the CE, for Type 3 LSAs B. when an OSPF route is distributed from the PE to the CE, for Type 5 LSAs C. when an OSPF route is distributed from the PE to the CE, for Type 3 and Type 5 LSAs D. when an OSPF route is distributed from the PE to the CE, for all types of LSAs Correct Answer: C QUESTION 20 Which two statements are true about unicast RPF? (Choose two.) A. Unicast RPF requires CEF to be enabled. B. Unicast RPF strict mode works better with multihomed networks. C. Unicast RPF strict mode supports symmetric paths. D. Unicast RPF strict mode supports asymmetric paths. E. CEF is optional with Unicast RPF, but when CEF is enabled it provides better performance. Correct Answer: AC QUESTION 21 Which two statements are true about IS-IS? (Choose two.) A. IS-IS DIS election is nondeterministic. B. IS-IS SPF calculation is performed in three phases. C. IS-IS works over the data link layer, which does not provide for fragmentation and reassembly. D. IS-IS can never be routed beyond the immediate next hop. Correct Answer: CD QUESTION 22 Which statement about the RPF interface in a BIDIR-PIM network is true? A. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the PIM rendezvous point. B. In a BIDIR-PIM network, the RPF interface can be the interface that is used to reach the PIM rendezvous point or the interface that is used to reach the source. C. In a BIDIR-PIM network, the RPF interface is always the interface that is used to reach the source. D. There is no RPF interface concept in BIDIR-PIM networks. Correct Answer: A QUESTION 23 Which statement about the device routing table is true?

9 A. Only networks /24 and smaller from host are in the routing table. B. Only networks /24 and larger from host are in the routing table. C. Only network /24 from host is in the routing table. D. Networks /24 and smaller from any host are in the routing table. Correct Answer: A QUESTION 24 Which is the way to enable the control word in an L2 VPN dynamic pseudowire connection on router R1? A. R1(config)# pseudowire-class cw-enable R1(config-pw-class)# encapsulation mpls R1(config-pw-class)# set control-word B. R1(config)# pseudowire-class cw-enable R1(config-pw-class)# encapsulation mpls R1(config-pw-class)# enable control-word C. R1(config)# pseudowire-class cw-enable R1(config-pw-class)# encapsulation mpls R1(config-pw-class)# default control-word D. R1(config)# pseudowire-class cw-enable R1(config-pw-class)# encapsulation mpls R1(config-pw-class)# control-word Correct Answer: D QUESTION 25 What will be the extended community value of this route? A. RT:200:3000 RT:200:9999 B. RT:200:9999 RT:200:3000 C. RT:200:3000 D. RT:200:9999 Correct Answer: D QUESTION 26 DRAG DROP Drag and drop the BGP attribute on the left to the correct category on the right. Select and Place:

10 Select and Place: Correct Answer:

11 QUESTION 27 DRAG DROP Drag and drop each MLPPP command on the left to the function it performs on the right. Select and Place: Select and Place:

12 Correct Answer: QUESTION 28

Which two statements about the 192.168.23.0/24 prefix are true? (Choose two.) A. Router 192.168.45.4 cannot act as a feasible successor. B. Router 192.168.35.

F. Only router 192.168.35.3 is a feasible successor.

13 Which two statements about the /24 prefix are true? (Choose two.) A. Router cannot act as a feasible successor. B. Router is the only successor. C. Only router is a feasible successor. D. Routers and are successors. E. Routers and are feasible successors. F. Only router is a feasible successor. Correct Answer: AB QUESTION 29 If this network is in the process of being migrated from EIGRP to OSPF, and all routers are now running both protocols which action must you perform to complete the migration? A. Change the EIGRP administrative distance to 95

14 B. Change the OSPF administrativedistance to 95 C. Change the OSPF administrativedistanceto 115 D. Change the EIGRP administrative distance to 115 Correct Answer: D QUESTION 30 Which two pieces of information in this Wireshark capture indicate that you are viewing EIGRP traffic? (Choose two.) A. the header length B. the protocol number C. the destination address D. the Class Selector E. the source address F. the header checksum Correct Answer: BC

9% Success Rate More than 69,000 Satisfied Customers Worldwide Multi-Platform capabilities - Windows, Mac, Android, iphone, ipod, ipad, Kindle Need Help Please provide as much detail

15 To Read the Whole Q&As, please purchase the Complete Version from Our website. Trying our product! 100% Guaranteed Success 100% Money Back Guarantee 365 Days Free Update Instant Download After Purchase 24x7 Customer Support Average 99.9% Success Rate More than 69,000 Satisfied Customers Worldwide Multi-Platform capabilities - Windows, Mac, Android, iphone, ipod, ipad, Kindle Need Help Please provide as much detail as possible so we can best assist you. To update a previously submitted ticket: Guarantee & Policy Privacy & Policy Terms & Conditions Any charges made through this site will appear as Global Simulators Limited. All trademarks are the property of their respective owners. Copyright , All Rights Reserved.

Vendor: Cisco. Exam Code: Exam Name: Implementing Cisco IP Routing (ROUTE v2.0) Version: Demo

Vendor: Cisco. Exam Code: Exam Name: Implementing Cisco IP Routing (ROUTE v2.0) Version: Demo Vendor: Cisco Exam Code: 300-101 Exam Name: Implementing Cisco IP Routing (ROUTE v2.0) Version: Demo DEMO QUESTION 1 Refer to the exhibit. The DHCP client is unable to receive a DHCP address from the DHCP