Passit4Sure.C _54,QA. Good explanation provided and the references added most of the questions.

Transcription

1 Passit4Sure.C _54,QA Number: C Passing Score: 800 Time Limit: 120 min File Version: Pass I T4Sure Good explanation provided and the references added most of the questions. Pretty much all the questions we study that may have multiple answers, no answer is in doubt, I got on the test. Any questions/info you can recall are on the VCEs. So the preparation of exam is very easy. This VCE covers all syllabus. After preparing it anyone pass the exam in high grades. Hope this helps. Best of luck for your exam and please post your exam experience for others. Thanks!

2 Exam A QUESTION 1 If a test fails because the tester has updated the test data, what should the tester do to prevent continued failures? A. re-record the test B. use the comparator and update the baseline data C. nothing, because the test is supposed to fail D. change the test data /Reference: QUESTION 2 Which three methods write to the RFT log? (Choose three.) A. logerror() B. logdefect() C. loginfo() D. logwarning() E. logsuccess() Correct Answer: ACD /Reference: QUESTION 3 Given the following: ProcessTestObject pid = startapp("classicsjavaa"); What are two valid methods one can call with a ProcessTestObject? (Choose two.) A. pid.duplicate() B. pid.kill() C. OK(pid).click() D. pid.find(atdescendant("value", "OK")) E. pid.getobjects(); Correct Answer: AD /Reference: QUESTION 4 Given the following code snippet: OK().waitForExistence(); Assuming that no changes have been made to the Functional Tester default playback settings, which two statements will cause Functional Tester to wait for 60 seconds for the OK button to appear? (Choose two.)

3 A. setoption(ioptionname.maximum_find_object_time, 60.0) B. setoption(ioptionname.maximum_wait_for_existence, 60.0) C. setoption(ioptionname.time_multiplier,.5) D. setoption(ioptionname.time_multiplier, 2.0) C /Reference: QUESTION 5 Given the following: A script named BuyCD has been created. A Helper Superclass named HelperSuper1 has been created. A Helper Superclass named HelperSuper2 has been created. Which of the following are valid Functional Tester script class inheritance hierarchies? (Choose two.) Note: inherits from is expressed by the symbol? A. BuyCD -> BuyCDHelper -> RationalTestScript B. BuyCD -> HelperSuper1 -> RationalTestScript C. Helper1 -> RationalTestScript -> BuyCD D. BuyCD -> HelperSuper1 -> HelperSuper2 -> RationalTestScript Correct Answer: AD /Reference: answer is valid. QUESTION 6 Given the following code snippet in which Customers() represents an HTML table from which data needs to be extracted: Customers().getTestData("contents"); What data type is returned by gettestdata("contents")? A. ITestDataTable B. String C. TableData D. TestData Correct Answer: A /Reference: QUESTION 7 Which statement is true about Functional Tester scripts and datapools?

4 A. All scripts are associated with either a private or shared datapool, and a script cannot existwithout a datapool B. There are three types of datapools: private, shared and global C. The datapool associated with a script cannot be changed once the association has beenmade D. A datapool can be created while in recording mode /Reference: QUESTION 8 Which Java method advances the datapool cursor to the next row in the datapool? A. dpmovenext() B. dpmovecursor() C. dpnext() D. dpnextrow() /Reference: QUESTION 9 Which three statements are true about HelperSuper classes? (Choose three.) A. Scripts can share Helper Superclasses. B. Scripts cannot share Helper Superclasses. C. Scripts can inherit from multiple Helper Superclasses. D. Scripts can inherit from a Helper Superclass that resides in a.jar file. Correct Answer: ACD /Reference: QUESTION 10 A script needs to perform an action on an object. One of the recognition properties of the object is the.url property. The URL is dynamic. At recording time, the URL was However, it can vary every time the script is played back. In particular, the portion of the.url property that is subject to change is the digits that appears after the dash. Which regular expression will match the value of the.url property regardless of the number of digits between the - and the.? Note: The regular expression should NOT match the.url property if no digits appear after the dash (as in ww-.ibm.com). A. www-*\.ibm\.com B. www-{num}?\.ibm\.com C. www-{num}+\.ibm\.com D. www-[0-9]*\.ibm\.com E. www-[0-9]\.ibm\.com

5 /Reference: QUESTION 11 What is the effect the Clear State on Close setting in the Object Map interface when you exit the object map? A. All new test objects will be accepted by removing the "New" designation from the test object. B. All new test objects will be accepted by changing the New designation to Accepted for the testobject. C. All unused test objects will be removed from the map. D. All test objects that have not been accepted will continue to have a designation of "New." Correct Answer: A /Reference: QUESTION 12 Exhibit # 1: Exhibit # 2:

6 A script needs to perform an action on an HTML List object. Figure 6.1 shows the recognition properties of the list object. Figure 6.2 shows the recognition properties of the HTML document. What will be the score of the found test object at runtime if the.text and id recognition properties in the list object are different and the.url property of the HTML Document object? A B C D /Reference: QUESTION 13 Given the following settings: Maximum acceptable recognition score10000 Last chance recognition score20000 Warn if accepted score is greater than10000 Maximum time to attempt to find Test Object20 How will RFT behave at runtime if the recognition score of a found object is 10000? A. It will accept the found object after waiting for 20 seconds for an object with better recognitionand write an Ambiguous Recognition Warning to the log. B. It will accept the found object after waiting for 20 seconds for an object with better recognitionand write nothing to the log. C. It will accept the found object immediately and write an Ambiguous Recognition Warning tothe log. D. It will accept the found object immediately and write nothing to the log. E. It will immediately throw an ObjectNotFoundException and write an Ambiguous RecognitionFailure to the log. F. It will throw an ObjectNotFoundException after waiting for 20 seconds for an object with betterrecognition and write an Ambiguous Recognition Failure to the log.

7 /Reference: answer is updated. QUESTION 14 Which feature is NOT offered by the Object Map interface? A. the ability to delete test objects that are not referenced by any scripts B. the ability to delete scripts that do not reference any test objects in the object map C. the ability to find all test objects not referenced by scripts D. the ability to merge two test objects /Reference: QUESTION 15 What is the minimum weight that can be assigned to a recognition property? A. no value (leave blank) B. 0 C. 1 D. 10 E. 100 /Reference: QUESTION 16 Which regular expression offers a successful way to ensure the order number is a 1 to 3-digit number in the following format? Your order number is 125. A. Your order number is [0-9]{3}. B. Your order number is [0-9]{3}\. C. Your order number is [0-9]{1,3). D. Your order number is [0-9]{1,3)\. /Reference: QUESTION 17 What are the default values for retry interval and maximum retry time? A. 2 second retry interval, 20 seconds maximum retry time B. 5 second retry interval, 30 seconds maximum retry time

8 C. 1 second retry interval, 5 seconds maximum retry time D. 3 second retry interval, 15 seconds maximum retry time Correct Answer: A /Reference: QUESTION 18 Which objects can be tested with a State verification point? A. A combo box and a list box B. A label and a text box C. A table and a tree view D. A checkbox and a toggle button /Reference: QUESTION 19 What is an appropriate use of the command Test Object > Highlight when working with verification points? A. It is used to highlight the test object at playback (to identify what is being tested). B. It is used to create a new verification point in the current script C. It is used to highlight the test object (to verify it is found in the application) D. It is used to identify all objects in an application which can be tested /Reference: QUESTION 20 Which statement is true about the "Time Delayed" method when you are creating verification points in your scripts? A. It introduces a fixed delay after a previous action before the verification point is tested B. It allows a verification point to keep trying until the time specified has elapsed C. It gives the tester time to reveal pop-up objects (such as menus) during the creation of averification point D. It gives the tester the opportunity to specify a delay after a verification point fails

9 /Reference: QUESTION 21 Given the following manual verification point vpmanual ("manual1", "The rain in Spain", "The Rain in Spain").performTest(); What are the results? A. The two strings are the same, and a pass would be generated in the log B. The two strings are different, and a fail would be generated in the log C. The syntax is incorrect, so this would not compile D. This will compile but the parameters are mixed up, and a fail would be recorded in the log.the correct syntax is: vpmanual ("The rain in Spain", "The Rain in Spain","manual1").performTest(); /Reference: QUESTION 22 Which branches under Preferences contain specific settings to enable the ClearCase integration? A. Workbench and Test B. Functional Test and Run/Debug C. Workbench and Team D. Plug-in Development and Functional Test /Reference: QUESTION 23 When you set break points, why does the script not stop at the break points and switch over to the debug perspective? A. This is a known eclipse bug in version 6.1 and has been corrected in the latest release or lastinterim fix B. The break point has already been recognized by the JVM and the break point needs to betoggled C. Either the icon or debug functional tester script was not invoked or the shift + F11 menuoption was not invoked D. The debug perspective is not listed as an available perspective when trying to debug a script /Reference: QUESTION 24 When you enable web browsers, what is the best way to select the Linux or UNIX web browser? A. You use the Search button, choose Search All, select the executable, and provide all theneeded parameters.

10 B. Modify the registry to enable Linux or Unix web browser support C. Modify the Internet Explorer settings to refer to a Linux or Unix web browser D. You use the Search button, choose Search In, browse to the executable, and provide all theneeded parameters /Reference: QUESTION 25 In which situation is it best to use the Browser Enablement Diagnostic tool? A. when the web browser does not launch when invoked through Functional Tester B. when testers are trying to determine it their web browsers are compatible with FunctionalTester C. when Functional Tester is in the recording process and no HTML objects are beingrecognized D. when Functional Tester is not able to launch the viewlet comparator on the HTML log /Reference: QUESTION 26 You cannot access help file from Rational Functional Tester. You receive an error or the page loads slowly. How can this be fixed? A. talk to the LAN Administrator to see if there is a problem with the corporate network or if theisp is having performance issues B. in Network properties, change the IP configuration to static IP and provide a valid IP address,which can be obtained from the LAN Administrator C. in the Network Advanced settings for proxies, remove " ; localhost" from theexceptions if these addresses are listed D. if your host was configured to use DHCP for IP assignment, make sure that the "Automaticallydetect settings" checkbox is cleared /Reference: QUESTION 27 Where do you set the option for switching to Test Debug perspective when debugging? A. Preferences > Functional Test > Workbench > Advanced B. Preferences > Java > Debug C. Preferences > Run/Debug > Console D. Preferences > Test Correct Answer: A /Reference:

11 answer is valid and updated. QUESTION 28 How do you add line numbers within the script editors view? A. use a third party plug-in because this option is not available within the tools interface B. download the latest version of the plug-in C. select the option under the main menu > Window > Preferences > Debug D. select the option under the main menu > Window > Preferences > Editor /Reference: QUESTION 29 How many default Java environments can you have within one configuration of Rational Functional Tester? A. one for each instance of the application under test B. as many default Java environments as are needed to do testing C. You can change the java environments dynamically when testing different applications. D. only one /Reference: QUESTION 30 What is the best practice when changing object maps that are already assigned to Functional Test projects? A. highlight the project in the Functional Test projects, right-click, select Properties > FunctionalTest project and browse to the new object map B. record a new script, select the new Functional Test project, click next and browse to the newtest object map C. modify the XML file, configurations.rftcfg, locate the object map section, enter the properobject and save the XML file D. right-click the test object map in the script explorer, choose the Open option and makenecessary changes Correct Answer: A /Reference: QUESTION 31 How do you start the application under test? A. use the Windows Start menu B. simply begin recording C. open a command line and start the application by typing its name D. click the Start Application button on the recording toolbar

12 /Reference: QUESTION 32 While recording a script, the recording monitor. A. appears at the conclusion of recording B. is only displayed on the toolbar C. does not appear D. displays a message for each action /Reference: QUESTION 33 What can be tested when recording a verification point? A. an objects data only B. an objects data or properties only C. whether or not the object is working D. an objects data, properties, or existence /Reference: QUESTION 34 What can you use to select an object as a verification point? A. the object finder, the object picker, or the object browser B. the main object browser, the test object browser, or the extra object browser C. the object finder, the test object browser, or the delay method D. the delay method1 the scripting method, or the pointer method /Reference:

13 QUESTION 35 A recording is started by: A. Entering script_record on the command line B. creating a script and then pressing the record button in the RFT application C. starting the application under test D. Starting RFT /Reference: QUESTION 36 How do you stop recording? A. click the Stop Recording button on the recording toolbar B. end the application under test C. close RFT D. close the recording monitor Correct Answer: A /Reference: QUESTION 37 Which three actions are possible with RFT? (Choose three.) A. use a wizard to substitute literals with datapool variables B. substitute literals in verification points with datapool variables C. create a datapool while recording a data-driven script D. create scripts in c# Correct Answer: ABC /Reference: QUESTION 38 You must a script with a datapool before substituting literal values in the script with references to datapool variables. A. share B. associate C. run D. disassociate

14 /Reference: QUESTION 39 When is the best time to use data-driven testing? A. when the test only needs to be run once B. when the test steps change based on the test input data C. when the test must be run multiple times with different data D. when the test requires a lot of manual data entry /Reference: QUESTION 40 Functional Tester allows you to import an external datapool from which of the following? (Choose three.) A. an external.csv file B. another Functional Tester datapool C. an existing TestManager datapool D. an access (.mdb) file Correct Answer: ABC /Reference: QUESTION 41 What will the following CallScript do? CallScript (myscript, null, DP_ALL) A. cause the script to run an infinite number of times B. cause the script to iterate through the entire datapool C. cause the script to run through 100 datapool values D. cause myscript to always pass /Reference: corrected and modified. QUESTION 42 What is one way to insert data-driven commands into the test script? A. use the Insert Data Driven Commands button while recording B. use the Insert Data Driven Commands button while executing C. the commands are generated automatically while importing the datapool D. use the super helper class after recording Correct Answer: A

15 /Reference: QUESTION 43 What must you do before editing the datapool using an external application? A. make it a public datapool B. make it a private datapool C. export it to a.csv file D. import it from a.csv file /Reference: QUESTION 44 Which statement is true about an RFT test datapool? A. It is exclusive for only one test script. B. It is a collection of related data records. C. It is automatically generated during script record. D. It is a collection of related test scripts. /Reference: QUESTION 45 What must you do to view a comparator of a failed verification point from an RFT text log? A. open a web browser and browse to open the file: \<project_path>\<log_name>\<log_vp_name>.rftvd for the verification point you want to view B. right-click on the test log and select Failed Verification Points from the right-click menu, thenselect the verification point you want to view C. open the test log, right-click on the verification point line you want to view and select ViewResults from the right-click menu D. log results in another format since you cannot open a comparator from a text log /Reference: QUESTION 46 Given an existing TestManager Rational Test project, what are the steps to log results to TestManager? A. from TestManager, create a new Test Script Type for RFT, then from RFT, select thefunctional Test logging preferences to TestManager B. from RFT, select the Functional Test logging preferences to TestManager, then select thetestmanager project when you run an RFT test C. from RFT, associate the Rational Test Project with the RFT project, then select the FunctionalTest

16 logging preferences to TestManager D. from the Rational Administrator, associate the RFT project to the Rational Test Project, thenfrom RFT, select the Functional Test logging preferences to TestManager /Reference: QUESTION 47 Out of the box, what are the different options for logging RFT tests? A. HTML, text, custom, TestManager, and none B. HTML, text, TPTP, TestManager, and none C. TestManager, CQTM, TPTP, HTML, and none D. HTML, PDF, text, TestManager, and none /Reference: QUESTION 48 Not including TestManager or custom logging, how can you organize RFT test results? A. define and follow a naming convention for all test logs B. define and follow a naming convention for all logs and log subfolders C. create as many folders in the *_logs project as needed and drag logs into the appropriatefolders D. create additional log projects which are associated with the primary RFT project, (for example,<project>_acceptance_logs) Correct Answer: A /Reference: QUESTION 49 How do you perform image verification in a test? A. select Perform Image Verification Point from the Verification Point and Action Wizard B. select the Perform Properties Verification Point from the Verification Point and Action Wizard,then select only the.src or other property for the image C. download and install the RFT Enhancement Pack plug-in from IBM Rational Support D. download and install the Image Comparator for Rational Functional Tester utility fromdeveloperworks /Reference: QUESTION 50

17 What should the tester open to view Test Objects, Main Data Area and Recognition Data? A. the test script B. the test comparator C. the object map D. the log viewer /Reference: QUESTION 51 What should the tester do to open the comparator in an HTML log after the test has been played back? A. select View > Failures from the menu B. click the View Results link in the test log C. nothing, because the comparator open automatically D. select Open > Comparator from the menu /Reference: QUESTION 52 What should the tester view to discover the current script action being executed? A. playback monitor B. the execution window C. the test script D. the application under test Correct Answer: A /Reference: QUESTION 53 The two phases of playing back a script are script development and. A. unit testing B. manual verification C. reviewing results D. regression testing /Reference:

18 QUESTION 54 The tester resets their test environment and sets the playback environment. What is the tester ready to do? A. record the test B. set recording options C. view and analyze the results D. play back the script /Reference: modified.