Cisco CVP VoiceXML 3.0. Element Specifications

Size: px
Start display at page:

Download "Cisco CVP VoiceXML 3.0. Element Specifications"

Transcription

1 Cisco CVP VoiceXML 3.0

2 CISCO CVP VOICEXML 3.0 Publication date: 14 January 2005 Copyright (C) Audium Corporation. All rights reserved. Distributed by Cisco Systems, Inc. under license from Audium Corporation. Customer Voice Portal is a trademark of Cisco Systems, Inc. Contact Information For more information, contact Cisco Systems, Inc. at the following location: Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA Tel: NETS (6387) Fax: General product information, visit Support inquiries, visit Customer forum, visit Copyright Audium Corporation. All Rights Reserved. 1/14/05 2

3 TABLE OF CONTENTS CISCO CVP VOICEXML 3.0 ABOUT THIS DOCUMENT... 8 AUDIENCE... 8 RELATED DOCUMENTATION... 8 OBTAINING TECHNICAL ASSISTANCE... 9 CISCO.COM... 9 NETWORK PROFESSIONAL CONNECTION... 9 TECHNICAL ASSISTANCE CENTER Cisco TAC Website Cisco TAC Escalation Center OBTAINING ADDITIONAL PUBLICATIONS AND INFORMATION INTRODUCTION AUDIO AUDIO GROUPS Audio Playback COUNTER SETTINGS ELEMENT DATA EXIT STATES CURRENCY SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Currency Capture End CURRENCY_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Currency Capture Currency Confirm End DATABASE SETTINGS Copyright Audium Corporation. All Rights Reserved. 1/14/05 3

4 TABLE OF CONTENTS CISCO CVP VOICEXML 3.0 ELEMENT DATA SESSION DATA EXIT STATES DATE SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Date Capture End DATE_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Date Capture Date Confirm End DIGITS SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Digits Capture End DIGITS_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Digits Capture Digits Confirm End SETTINGS EXIT STATES FORM SETTINGS Copyright Audium Corporation. All Rights Reserved. 1/14/05 4

5 TABLE OF CONTENTS CISCO CVP VOICEXML 3.0 ELEMENT DATA EXIT STATES AUDIO GROUPS Form Data Capture End FORM_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Form Data Capture Form Data Confirm End _OPTION_MENU, 3_OPTION_MENU,..., 10_OPTION_MENU SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Menu Option Capture End NUMBER SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Number Capture End NUMBER_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Number Capture Number Confirm End PHONE SETTINGS ELEMENT DATA Copyright Audium Corporation. All Rights Reserved. 1/14/05 5

6 TABLE OF CONTENTS CISCO CVP VOICEXML 3.0 EXIT STATES AUDIO GROUPS Phone Capture End PHONE_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Phone Capture Phone Confirm End RECORD SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Record Capture RECORD_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Record Capture Record Confirm SUBDIALOG_RETURN SETTINGS EXIT STATES SUBDIALOG_START SETTINGS EXIT STATES TIME SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Time Capture End Copyright Audium Corporation. All Rights Reserved. 1/14/05 6

7 TABLE OF CONTENTS CISCO CVP VOICEXML 3.0 TIME_WITH_CONFIRM SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Time Capture Time Confirm End TRANSFER SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Transfer Audio End YES_NO_MENU SETTINGS ELEMENT DATA EXIT STATES AUDIO GROUPS Yes / No Capture End Copyright Audium Corporation. All Rights Reserved. 1/14/05 7

8 ABOUT THIS DOCUMENT CISCO CVP VOICEXML 3.0 About This Document Thank you for choosing Cisco CVP VoiceXML 3.0. This document describes how use and configure CVP VoiceXML elements in your voice application. Audience This document is intended for voice application and component developers using Cisco CVP VoiceXML. Related Documentation Cisco CVP VoiceXML Studio. The Cisco CVP VoiceXML Studio documentation describes the functionality of Studio including creating projects, using the Studio environment and deploying applications to CVP VoiceXML Server. This documentation is available through CVP VoiceXML Studio only. Installation Guide. This document provides instructions on installing Cisco CVP VoiceXML and its components. User Guide. This document provides an introduction to Cisco CVP VoiceXML software though it focuses on describing all aspects of CVP VoiceXML Server. Programmer Guide. This document provides information on how to build components that run on Cisco CVP VoiceXML. Say It Smart Specifications. This document describes in detail the functionality and configuration options for all CVP VoiceXML Say It Smart plugins included with the software. Javadocs. Javadocs are a group of HTML pages fully describing the entire Java application programming interfaces (APIs) to Cisco CVP VoiceXML. Developers use Javadocs in conjunction with the Programmer Guide to understand how to build custom components that run on Cisco CVP VoiceXML. Copyright Audium Corporation. All Rights Reserved. 1/14/05 8

9 OBTAINING TECHNICAL ASSISTANCE CISCO CVP VOICEXML 3.0 Obtaining Technical Assistance Cisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) Website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities. Cisco.com Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world. Cisco.com provides a broad range of features and services to help you with these tasks: Streamline business processes and improve productivity Resolve technical issues with online support Download and test software packages Order Cisco learning materials and merchandise Register for online skill assessment, training, and certification programs To obtain customized information and service, you can self-register on Cisco.com at this URL: Network Professional Connection Cisco provides a forum where you can discuss and exchange information regarding call center issues. To access the the forum, go to the following Web site: Copyright Audium Corporation. All Rights Reserved. 1/14/05 9

10 OBTAINING TECHNICAL ASSISTANCE CISCO CVP VOICEXML 3.0 Technical Assistance Center The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two levels of support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The avenue of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable. We categorize Cisco TAC inquiries according to urgency: Priority level 4 (P4) You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration. Priority level 3 (P3) Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue. Priority level 2 (P2) Your production network is severely degraded, affecting significant aspects of business operations. No workaround is available. Priority level 1 (P1) Your production network is down, and a critical impact to business operations will occur if service is not restored quickly. No workaround is available. Cisco TAC Website You can use the Cisco TAC website to resolve P3 and P4 issues yourself, saving both cost and time. The site provides aroundthe-clock access to online tools, knowledge bases, and software. To access the Cisco TAC website, go to this URL: All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register: If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC website, you can open a case online at this URL: Copyright Audium Corporation. All Rights Reserved. 1/14/05 10

11 OBTAINING TECHNICAL ASSISTANCE CISCO CVP VOICEXML If you have Internet access, we recommend that you open P3 and P4 cases through the Cisco TAC website so that you can describe the situation in your own words and attach any necessary files. Cisco TAC Escalation Center The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case. To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL: Before calling, please check with your network operations center to determine the level of Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number. Copyright Audium Corporation. All Rights Reserved. 1/14/05 11

12 OBTAINING ADDITIONAL PUBLICATIONS AND INFORMATION CISCO CVP VOICEXML 3.0 Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. The Cisco Product Catalog describes the networking products offered by Cisco Systems as well as ordering and customer support services. Access the Cisco Product Catalog at this URL: Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL: Packet magazine is the Cisco monthly periodical that provides industry professionals with the latest information about the field of networking. You can access Packet magazine at this URL: iq Magazine is the Cisco monthly periodical that provides business leaders and decision makers with the latest information about the networking industry. You can access iq Magazine at this URL: Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in the design, development, and operation of public and private internets and intranets. You can access the Internet Protocol Journal at this URL: Training Cisco offers world-class networking training, with current offerings in network training listed at this URL: Copyright Audium Corporation. All Rights Reserved. 1/14/05 12

13 INTRODUCTION CISCO CVP VOICEXML 3.0 Introduction Every element included with CVP VoiceXML Studio and Server must be configured before it can be used. This reference file contains a detailed specification for each of the CVP VoiceXML elements, listing all the options available in the configuration. The specifications must be followed, or the element may complain with an error message or behave erratically. Each element specification in this reference file presents information on some or all of the following five topics: Overview. Each specification starts with a brief description of the element s behavior including what it does, how it reacts to various settings and audio groups, and other miscellaneous behavior. The information should help the developer decide whether to use these elements in an application or to rely on custom elements. Settings. Settings contain information that affects how the element behaves. Each setting is described in this document using the following attributes: o Type: The type of data accepted such as a boolean, integer, or enumeration. o Required: This defines whether the setting is required to have a value if the setting is active (available to be configured in CVP VoiceXML Studio). The definition of required in this case is that the setting must have an appropriate value for CVP VoiceXML Studio to validate the voice element configuration. In CVP VoiceXML Studio, all required settings are denoted by a red asterisk in front of the setting names. o Single setting value: This defines whether the setting can have multiple values. If set to true, then the setting may have only a single configuration value. Multiple value settings are created in CVP VoiceXML Studio by right clicking on the setting and choosing the add setting name option. o Substitution allowed: This setting attribute determines if the setting value can include substitution for dynamic configuration. In CVP VoiceXML Studio, any setting that allows substitution values will activate the substitution button located at the top right of the settings pane. o Default: The initial value of an element setting when a new element is dragged to the workspace. Element Data. Some elements capture data, and yield information that may be useful to other elements or for logging purposes. The variables created by each element are listed here. Exit States. Each element may have one or more exit states that indicate the dialog status when the element execution has completed. Exit states do not appear in an element configuration and cannot be changed. Copyright Audium Corporation. All Rights Reserved. 1/14/05 13

14 INTRODUCTION CISCO CVP VOICEXML 3.0 Audio Groups. Audio groups define the different places within an element where audio can be played. Each audio group may contain one or more audio items that can be played one after another. Bargein is specified on the audio group level, and therefore all audio items within the same audio group will share the same barge in value. Audio items may be pre-recorded audio files, textto-speech (TTS) phrases, and Say It Smart types (playback of formatted data such as dates, currency amounts, etc). Each audio group is described using the following attributes: o Required: This defines whether the audio group is required to have a configuration value, in order for CVP VoiceXML Studio to validate the voice element configuration. In CVP VoiceXML Studio, all required audio groups will show up in the Audio pane when a new element is dragged to the workspace, and they are not removable. Audio groups that are optional will be included in the Add Audio Groups list and can be configured after they are added to the Audio pane. o Max 1: This defines whether multiple audio groups can be configured. If set to Yes, the element may only have one such audio group configured, though the audio group may still contain more than one audio items. If set to No, multiple audio groups can be configured in CVP VoiceXML Studio by right clicking on Audio Groups (at top of the pane) and choosing the add audio group name option. In CVP VoiceXML Studio, any audio group that is limited to one configuration per element will not display a count in its name, and the Count drop-down box will be greyed out. Audio groups with multiple counts are used to define different audios to play each time a certain VoiceXML event occurs (often known as tapered prompts). Copyright Audium Corporation. All Rights Reserved. 1/14/05 14

15 VOICE ELEMENT: AUDIO CISCO CVP VOICEXML 3.0 Audio The Audio voice element simply outputs a VoiceXML page with the contents of a single audio group. The Audio element is used for greetings, error messages and any other time audio is to be played in a situation not associated with an input state. Audio Groups Audio Playback Name (Label) Max 1 Req d initial_audio_group (Initial) Yes Yes The audio group containing the audio to play. Studio Element Folder: Top Level Class Name: com.audium.server.voiceelement.audio.maudio Copyright Audium Corporation. All Rights Reserved. 1/14/05 15

16 ACTION ELEMENT: COUNTER CISCO CVP VOICEXML 3.0 Counter The Counter action element is used to keep track of a count stored as element data. The initial value of the count is defined as a configuration setting. In addition, the element may be configured to increment or decrement with a user defined step size. A typical use for the Counter element would be in a loop in the call flow that increments the count until a decision element decides that the loop must end. Revisiting a Counter element instance will automatically update the count. Settings initial (Initial Count) type (Type) step (Step Size) Element Data Name (Label) Type Req d Single setting value Substitution allowed Default int Yes true true 0 This setting specifies at which integer value this counter should start. string Yes true true increm This setting specifies whether the counter should enum ent be incremented or decremented. Possible values are: decrement increment. int Yes true true 1 This setting specifies by how much this counter should be incremented or decremented. Name Type count String The current count. Exit States done Name The counter was updated. Studio Element Folder: Calculation Class Name: com.audium.server.action.counter.counteraction Copyright Audium Corporation. All Rights Reserved. 1/14/05 16

17 VOICE ELEMENT: CURRENCY CISCO CVP VOICEXML 3.0 Currency The Currency voice element captures from the caller a currency amount in dollars and cents. The currency amount can be entered using the keypad or speech input. The captured value will be stored in element data as a decimal value (without the $ character). There are several different formats for speaking a currency amount or entering it through the keypad. Voice browsers may use different grammars and therefore accept different utterances. However, the spoken formats listed below should result in the same behavior for all supported browsers. The tables below list each input and the value that is stored in the element variable as a result. If some data is left out, the system assumes a default value for the missing information. Utterance Stored Value Example Description [dollar] "dollar(s)" ("and") [cent] "cent(s)" D.CC "thirteen dollars and fifty cents " = Dollars are whole numbers >= 0. Cents are from 00 to 99. The word "and" is optional. [dollar] "dollar(s) "[cent] D.CC "thirteen dollars five" = Dollars are whole numbers >= 0. Cents are from 00 to 99. [dollar] "dollar(s)" D.00 three hundred fifty = A plain whole number is interpreted as dollars with no cents. [cent] "cent(s)" 0.CC "three cents" = 0.03 To specify cents only, the word "cents" but be uttered. Cents are from 00 to 99. DTMF Entry Stored Value Example Description [D]*[CC] D.CC 3*99 = 3.99 The decimal is represented by the * button. There are other formats that are possible, particularly when entering via DTMF and inputting incomplete amounts. These inputs may yield differing results on various voice browsers. The returned variable will always be a decimal value with the appropriate number of padded zeros if applicable. Copyright Audium Corporation. All Rights Reserved. 1/14/05 17

18 VOICE ELEMENT: CURRENCY CISCO CVP VOICEXML 3.0 Settings Name (Label) Type Req d Single Substitution Default setting value allowed inputmode (Input Mode) string enum Yes true false both The type of entry allowed for input. Possible values are: voice dtmf both. noinput_timeout (Noinput Timeout) string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a currency_max_noinput_count (Currency Max NoInput Count) currency_max_nomatch_count (Currency Max NoMatch Count) currency_confidence_level (Currency Confidence Level) noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events allowed during currency input capture. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during currency input capture. 0 = infinite nomatches allowed. decimal (0.0 to 1.0) Yes true true 0.40 The confidence level threshold to use during currency capture. Element Data Name Type value string The currency amount captured. This will always be a decimal number with the appropriate number of padded zeros (up to 2). value_confidence float This is the confidence value of the captured utterance. Exit States Name max_nomatch max_noinput done The maximum number of nomatch events has occurred. If the nomatch max count is 0, this exit state will never occur. The maximum number of noinput events has occurred. If the noinput max count is 0, this exit state will never occur. The currency capture was completed. Copyright Audium Corporation. All Rights Reserved. 1/14/05 18

19 VOICE ELEMENT: CURRENCY CISCO CVP VOICEXML 3.0 Audio Groups Currency Capture Name (Label) Req d Max 1 currency_initial_audio_group Yes Yes Played when the voice element first begins. (Currency Initial) currency_nomatch_audio_group (Currency NoMatch) No No Played when a nomatch event occurs. The nomatch event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event currency_noinput_audio_group (Currency NoInput) currency_help_audio_group (Currency Help) End of a nomatch. No No Played when a noinput event occurs. The noinput event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a noinput. No No Played when a help event is triggered. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the nomatch audio group to play (or the initial audio group if nomatch audio group is not specified). Name (Label) Req d Max 1 done_audio_group (Done) No Yes Played when the currency capture is completed and the voice element exits with the done exit state. Studio Element Folder: Commerce Class Name: com.audium.server.voiceelement.currency.mbasiccurrency Copyright Audium Corporation. All Rights Reserved. 1/14/05 19

20 VOICE ELEMENT: CURRENCY_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Currency_With_Confirm The Currency_With_Confirm voice element captures from the caller a currency amount in dollars and cents, and presents a confirmation menu allowing the caller to either accept their entry or re-enter the currency value. The currency amount can be entered using the keypad or speech input. The captured value will be stored in element data as a decimal value (without the $ character). There are several different formats for speaking a currency amount or entering it through the keypad. Voice browsers may use different grammars and therefore accept different utterances. However, the spoken formats listed below should result in the same behavior for all supported browsers. The tables below list each input and the value that is stored in element data as a result. If some data is left out, the system assumes a default value for the missing information. Utterance Stored Value Example Description [dollar] "dollar(s)" ("and") [cent] "cent(s)" D.CC "thirteen dollars and fifty cents " = Dollars are whole numbers >= 0. Cents are from 00 to 99. The word "and" is optional. [dollar] "dollar(s) "[cent] D.CC "thirteen dollars five" = Dollars are whole numbers >= 0. Cents are from 00 to 99. [dollar] "dollar(s)" D.00 three hundred fifty = A plain whole number is interpreted as dollars with no cents. [cent] "cent(s)" 0.CC "three cents" = 0.03 To specify cents only, the word "cents" but be uttered. Cents are from 00 to 99. DTMF Entry Stored Value Example Description [D]*[CC] D.CC 3*99 = 3.99 The decimal is represented by the * button. There are other formats that are possible, particularly when entering via DTMF and inputting incomplete amounts. These inputs may yield inconsistent results on various voice browsers. The returned variable will always be a decimal value with the appropriate number of padded zeros if applicable. Copyright Audium Corporation. All Rights Reserved. 1/14/05 20

21 VOICE ELEMENT: CURRENCY_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Settings Single Name (Label) Type Req d setting value Substitution allowed Default inputmode (Input Mode) string enum Yes true false both The type of entry allowed for input. Possible values are: voice dtmf both. noinput_timeout (Noinput Timeout) string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a currency_max_noinput_count (Currency Max NoInput Count) currency_max_nomatch_count (Currency Max NoMatch Count) confirm_max_noinput_count (Confirm Max NoInput Count) confirm_max_nomatch_count (Confirm Max NoMatch Count) max_disconfirmed_count (Max Disconfirmed Count) currency_confidence_level (Currency Confidence Level) confirm_confidence_level (Confirm Confidence Level) noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events allowed during currency input capture. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during currency input capture. 0 = infinite nomatches allowed. int 0 Yes true true 3 The maximum number of noinput events allowed during currency input confirmation. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during currency input confirmation. 0 = infinite nomatches allowed. int 0 Yes true true 3 The maximum number of times a caller is allowed to disconfirm a captured input. 0 = infinite disconfirmations allowed. decimal (0.0 to 1.0) Decimal (0.0 to 1.0) Yes true true 0.40 The confidence level threshold to use during currency capture. Yes true true 0.50 The confidence level threshold to use during confirmation. Element Data Name Type value string The currency amount captured. This will always be a decimal number with the appropriate number of padded zeros (up to 2). value_confidence float This is the confidence value of the captured currency utterance. confirm_confidence float This is the confidence value of the captured confirm utterance. Copyright Audium Corporation. All Rights Reserved. 1/14/05 21

22 VOICE ELEMENT: CURRENCY_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Exit States Name max_nomatch The maximum number of nomatch events has occurred. If the nomatch max count is 0, this exit state will never occur. max_noinput The maximum number of noinput events has occurred. If the noinput max count is 0, this exit state will never occur. max_disconfirmed The maximum number of disconfirmation has occurred. If the max disconfirmed count is set to 0, this exit state will never occur. done The currency captured was confirmed. Audio Groups Currency Capture Name (Label) Req d Max 1 currency_initial_audio_group Yes Yes Played when the voice element first begins. (Currency Initial) currency_nomatch_audio_group (Currency NoMatch) No No Played when a nomatch event occurs during currency input capture. The nomatch event count corresponds to the audio group count. If not specified, the initial audio group will currency_noinput_audio_group (Currency NoInput) currency_help_audio_group (Currency Help) Currency Confirm be played in the event of a nomatch. No No Played when a noinput event occurs during currency input capture. The noinput event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a noinput. No No Played when a help event is triggered during currency input capture. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the nomatch audio group to play (or the initial audio group if nomatch audio group is not specified). Name (Label) Req d Max 1 confirm_initial_audio_group Yes Yes Played when confirmation first begins. (Confirm Initial) confirm_nomatch_audio_group (Confirm NoMatch) No No Played when a nomatch event occurs during confirmation. The nomatch event count corresponds to the audio group count. If not specified, the confirm initial audio group confirm_noinput_audio_group (Confirm NoInput) will be played in the event of a nomatch. No No Played when a noinput event occurs during confirmation. The noinput event count corresponds to the audio group count. If not specified, the confirm initial audio group will be played in the event of a noinput. Copyright Audium Corporation. All Rights Reserved. 1/14/05 22

23 VOICE ELEMENT: CURRENCY_WITH_CONFIRM CISCO CVP VOICEXML 3.0 confirm_help_audio_group (Confirm Help) disconfirmed_audio_group (Disconfirmed) No No Played when a help event is triggered during confirmation. The help event count corresponds to the audio group count. If not specified, a help event will trigger the confirm nomatch audio group to play (or the confirm initial audio group if confirm nomatch audio group is not specified). No No Played after the caller disconfirms a captured currency entry. Upon reaching the max_disconfirmed_count, the prompt should be about exiting with the max_disconfirmed exit state. End yes_audio_group (Yes) Name (Label) Req d Max 1 No Yes Played after the caller chooses the "yes" option. If not specified, no audio will be played when this option is chosen. Studio Element Folder: Commerce Class Name: com.audium.server.voiceelement.currency.mbasiccurrencywithconfirm Copyright Audium Corporation. All Rights Reserved. 1/14/05 23

24 ACTION ELEMENT: DATABASE CISCO CVP VOICEXML 3.0 Database The database element provides the ability to execute an SQL command on external databases within a voice application call flow. The element requires JNDI to be configured in the Java application server to handle database connections. Only a single SQL statement can be executed per element. There are four types of commands that can be made: Single. This is used to run a SQL query that returns only a single row. Element data will be created with the variable names being the names of the columns returned and the value of that column as the element data value (as a string). If no row is returned, no element data will be set. Multiple. This is used to run a SQL query that returns multiple rows. A CVP-defined Java data structure, the Java class ResultSetList, stores the full result and is placed in session data. If no rows are returned, the ResultSetList object in session data will be empty. For detail about the ResultSetList data structure, refer to the Javadocs for this class. Inserts. This is used to run a SQL INSERT command that inserts information into the database. Updates. This is used to run a SQL UPDATE command that updates information in the database. The developer can utilize substitution to create dynamic queries. The Database element is ideal for performing simple queries and updates. It may not be sufficient for performing complex database interactions such as multiple dependent queries or stored procedure calls. One would use a custom configurable or generic action element for these tasks. Also note that in order to avoid performance issues creating database connections, implementing database pooling on the application server is highly recommended. Settings Single Name (Label) Type Req d setting value Substitution allowed Default type string Yes true true single The type of query: single, multiple, insert or (Type) enum update. jndiname string Yes true true None This JNDI name for the SQL datasource of the database. (JNDI Name) key (Session Data Key) string Yes true true None For queries of type multiple, the name of the session variable which the results of the query will be stored. query (SQL Query) string Yes true true None The SQL query to be executed. Copyright Audium Corporation. All Rights Reserved. 1/14/05 24

25 ACTION ELEMENT: DATABASE CISCO CVP VOICEXML 3.0 Element Data Element data is created only when the type setting is set to single. Element data given the names of the return columns are created containing the respective return values. For example, if a query returned the following information: foo bar The following element data will be created: foo with the value 123 and bar with the value 456. Session Data Session data is created only when the type setting is set to multiple. In all other cases, no session data is created. Name Type [value of setting key ] ResultSetList The Java data structure that stores the returned values from a multiple type query. The name of the session data variable is specified by the developer in the key setting. Exit States done Name The database query successfully completed. Studio Element Folder: Integration Class Name: com.audium.server.action.database.databaseaction Copyright Audium Corporation. All Rights Reserved. 1/14/05 25

26 VOICE ELEMENT: DATE CISCO CVP VOICEXML 3.0 Date The Date voice element captures a date input from the caller. The date can be entered using DTMF input (in the YYYYMMDD format). It can also be spoken in natural language including a month, day and year. The captured value will be stored in element data as a fixed-length date string in the YYYYMMDD format. If the year is not specified in the input, YYYY is stored as????. And if the month or the day is not specified, MM and DD will be stored as??. Settings Name (Label) Type Req d Single setting value inputmode string (Input Mode) enum Noinput_timeout (Noinput Timeout) collect_max_noinput_count (Date Max NoInput Count) Substitution allowed Default Yes true false both The type of entry allowed for input. Possible values are: voice dtmf both. string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events. 0 = infinite noinputs allowed. collect_max_nomatch_count (Date Max NoMatch Count) collect_confidence_level (Date Confidence Level) int 0 Yes true false 3 The maximum number of nomatch events allowed. 0 = infinite nomatches allowed. decimal Yes true true 0.40 The confidence level threshold to use during date ( ) capture. Element Data Name Type value string The date stored in the YYYYMMDD format. value_confidence float This is the confidence value of the captured date utterance. Copyright Audium Corporation. All Rights Reserved. 1/14/05 26

27 VOICE ELEMENT: DATE CISCO CVP VOICEXML 3.0 Exit States Name max_nomatch max_noinput done The maximum number of nomatch events has occurred. If the max nomatch count is 0, this exit state will never occur. The maximum number of noinput events has occurred. If the max noinput count is 0, this exit state will never occur. The date capture was completed. Audio Groups Date Capture Name (Label) Req d Max 1 collect_initial_audio_group Yes Yes Played when the voice element first begins. (Date Initial) collect_nomatch_audio_group (Date NoMatch) No No Played when a nomatch event occurs. The nomatch event count corresponds to the audio group count. If not specified, the initial audio collect_noinput_audio_group (Date NoInput) collect_help_audio_group (Date Help) End group will be played in the event of a nomatch. No No Played when a noinput event occurs. The noinput event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a noinput. No No Played when a help event is triggered. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the nomatch audio group to play (or the initial audio group if nomatch audio group is not specified). done_audio_group (Done) Name (Label) Req d Max 1 No Yes Played after the date capture is completed. If not specified, no audio will be played. Studio Element Folder: Date & Time Class Name: com.audium.server.voiceelement.date.mbasicdate Copyright Audium Corporation. All Rights Reserved. 1/14/05 27

28 VOICE ELEMENT: DATE_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Date_With_Confirm The Date_With_Confirm voice element captures a date input from the caller, and presents a confirmation menu allowing the caller to either accept their entry or re-enter the date. The date can be entered using DTMF input (in the YYYYMMDD format). It can also be spoken in natural language including a month, day and year. The captured value will be stored in element data as a fixed-length date string in the YYYYMMDD format. If the year is not specified in the input, YYYY is stored as????. If the month or the day is not specified, MM and DD will be stored as??. Settings Name (Label) Type Req d Single setting value inputmode string (Input Mode) enum noinput_timeout (Noinput Timeout) collect_max_noinput_count (Date Max NoInput Count) collect_max_nomatch_count (Date Max NoMatch Count) confirm_max_noinput_count (Confirm Max NoInput Count) confirm_max_nomatch_count (Confirm Max NoMatch Count) max_disconfirmed_count (Max Disconfirmed Count) collect_confidence_level (Date Confidence Level) confirm_confidence_level (Confirm Confidence Level) Substitution allowed Default Yes true false both The type of entry allowed for input. Possible values are: voice dtmf both. string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events allowed during date input capture. 0 = infinite noinputs allowed. int 0 Yes true false 3 The maximum number of nomatch events allowed during date input capture. 0 = infinite nomatches allowed. int 0 Yes true true 3 The maximum number of noinput events allowed during date input confirmation. 0 = infinite noinputs allowed. int 0 Yes true false 3 The maximum number of nomatch events allowed during date input confirmation. 0 = infinite nomatches allowed. int 0 Yes true false 3 The maximum number of times a caller is allowed to disconfirm a captured input. 0 = infinite disconfirmations allowed. decimal ( ) decimal ( ) Yes true true 0.40 The confidence level threshold to use during date capture. Yes true true 0.50 The confidence level threshold to use during confirmation. Copyright Audium Corporation. All Rights Reserved. 1/14/05 28

29 VOICE ELEMENT: DATE_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Element Data Name Type value string The date stored in the YYYYMMDD format. value_confidence float This is the confidence value of the captured date utterance. confirm_confidence float This is the confidence value of the captured confirm utterance. Exit States Name max_nomatch The maximum number of nomatch events has occurred. If the max nomatch count is 0, this exit state will never occur. max_noinput The maximum number of noinput events has occurred. If the max noinput count is 0, this exit state will never occur. max_disconfirmed The maximum number of disconfirmation occurred. If the max_disconfirmed_count is set to 0, this exit state will never occur. done The date captured was confirmed. Audio Groups Date Capture Name (Label) Req d Max 1 collect_initial_audio_group Yes Yes Played when the voice element first begins. (Date Initial) collect_nomatch_audio_group (Date NoMatch) No No Played when a nomatch event occurs during date input capture. The nomatch event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a collect_noinput_audio_group (Date NoInput) collect_help_audio_group (Date Help) nomatch. No No Played when a noinput event occurs during date input capture. The noinput event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a noinput. No No Played when a help event is triggered during date input capture. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the nomatch audio group to play (or the initial audio group if nomatch audio group is not specified). Copyright Audium Corporation. All Rights Reserved. 1/14/05 29

30 VOICE ELEMENT: DATE_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Date Confirm Name (Label) Req d Max 1 confirm_initial_audio_group Yes Yes Played when the captured date is confirmed. (Confirm Initial) confirm_nomatch_audio_group (Confirm NoMatch) No No Played when a nomatch event occurs during confirmation. The nomatch event count corresponds to the audio group count. If not specified, the confirm initial audio confirm_noinput_audio_group (Confirm NoInput) confirm_help_audio_group (Confirm Help) disconfirmed_audio_group (Disconfirmed) End yes_audio_group (Yes) group will be played in the event of a nomatch. No No Played when a noinput event occurs during confirmation. The noinput event count corresponds to the audio group count. If not specified, the confirm initial audio group will be played in the event of a noinput. No No Played when a help event is triggered during confirmation. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the confirm nomatch audio group to play (or the confirm initial audio group if confirm nomatch audio group is not specified). No No Played after the caller disconfirms a date entry. Name (Label) Req d Max 1 Studio Element Folder: Date & Time Class Name: com.audium.server.voiceelement.date.mbasicdatewithconfirm No Yes Played after the caller chooses the "yes" option. If not specified, no audio will be played when this option is chosen. Copyright Audium Corporation. All Rights Reserved. 1/14/05 30

31 VOICE ELEMENT: DIGITS CISCO CVP VOICEXML 3.0 Digits The Digits voice element captures a string of numerical digits. It may be used to collect small or large strings of digits. The digit string can be entered using the keypad or speech input. The captured value will be stored in element data as a string. The string cannot contain any non-numerical characters. Using speech input, the number is spoken one digit at a time (i.e is spoken "four nine six seven eight"). DTMF input can be terminated by a # keypress if desired (if not used, the entry is considered terminated when the input timeout has been reached). With the Digits voice element, the application designer has the ability to set length restrictions on the digit string. A minimum and maximum length can be given to narrow the criteria. If a string of a specific length is required, the minimum and maximum lengths should be set to the same value. If fewer digits are entered, a nomatch event will be thrown. A string of digits with length greater than the maximum length cannot be entered. Settings Single Name (Label) Type Req d setting value Substitution allowed Default inputmode (Input Mode) string enum Yes true false both The type of entry allowed for input. Possible values are: voice dtmf both. noinput_timeout (Noinput Timeout) max_noinput_count (Digits Max NoInput Count) max_nomatch_count (Digits Max NoMatch Count) digits_confidence_level (Digits Confidence Level) min_digit (Min Digit) max_digit (Max Digit) string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events allowed during digits input capture. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during digits input capture. 0 = infinite nomatches allowed. decimal Yes true true 0.40 The confidence level threshold to use during (0.0 to 1.0) digits capture. int > 0 Yes true true None Minimum number of digits allowed. int > 0 Yes true true None Maximum number of digits allowed. Copyright Audium Corporation. All Rights Reserved. 1/14/05 31

32 VOICE ELEMENT: DIGITS CISCO CVP VOICEXML 3.0 Element Data Name Type value string The digit string value captured. value_confidence float This is the confidence value of the captured utterance. Exit States Name max_nomatch max_noinput done The maximum number of nomatch events has occurred. If the nomatch max count is 0, this exit state will never occur. The maximum number of noinput events has occurred. If the noinput max count is 0, this exit state will never occur. The digit string capture was completed. Audio Groups Digits Capture Name (Label) Req d Max 1 digits_initial_audio_group Yes Yes Played when the voice element first begins. (Digits Initial) digits_nomatch_audio_group (Digits NoMatch) No No Played when a nomatch event occurs. The nomatch event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of digits_noinput_audio_group (Digits NoInput) digits_help_audio_group (Digits Help) End done_audio_group (Done) a nomatch. No No Played when a noinput event occurs. The noinput event count corresponds to the audio group count. If not specified, the initial audio group will be played in the event of a noinput. No No Played when a help event is triggered. The help event count corresponds to the audio group count. By default, the help event can be triggered by the voice input help. Additionally, other voice and DTMF inputs can be used to trigger the help event by configuring a hotlink to throw a help event. If the audio group is not specified, a help event will trigger the nomatch audio group to play (or the initial audio group if nomatch audio group is not specified). Name (Label) Req d Max 1 No Yes Played when the digits capture is completed and the voice element exits with the done exit state. Copyright Audium Corporation. All Rights Reserved. 1/14/05 32

33 VOICE ELEMENT: DIGITS CISCO CVP VOICEXML 3.0 Studio Element Folder: Number Capture Class Name: com.audium.server.voiceelement.digit.mbasicdigit Copyright Audium Corporation. All Rights Reserved. 1/14/05 33

34 VOICE ELEMENT: DIGITS_WITH_CONFIRM CISCO CVP VOICEXML 3.0 Digits_With_Confirm The Digits_With_Confirm voice element captures a string of numerical digits, and presents a confirmation menu allowing the caller to either accept their entry or re-enter the digits. It may be used to collect small or large strings of digits. The digit string can be entered using the keypad or speech input. The captured value will be stored in element data as a string. The string cannot contain nonnumerical characters. Using speech input, the number is spoken one digit at a time (i.e is spoken "four nine six seven eight"). DTMF input can be terminated by a # keypress if desired (otherwise, the entry is considered terminated when the input timeout is reached). With the Digits_With_Configm voice element, the application designer has the ability to set length restrictions on the digit string. A minimum and maximum length can be given to narrow the criteria. If a string of a specific length is required, the minimum and maximum lengths should be set to the same value. If fewer digits are entered, a nomatch event will be thrown. A string of digits with length greater than the maximum length cannot be entered. Settings inputmode (Input Mode) noinput_timeout (Noinput Timeout) Name (Label) Type Req d string enum digits_max_noinput_count (Digits Max NoInput Count) digits_max_nomatch_count (Digits Max NoMatch Count) confirm_max_noinput_count (Confirm Max NoIput Count) confirm_max_nomatch_count (Confirm Max NoMatch Count) Single setting value Substitution allowed Default Yes true false both The type of entry allowed for input (during digits capture and confirmation). Possible values are: voice dtmf both. string Yes true true 5s The maximum time length allowed (in seconds) for silence or no keypress before a noinput event is thrown. int 0 Yes true true 3 The maximum number of noinput events allowed during digits input capture. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during digits input capture. 0 = infinite nomatches allowed. int 0 Yes true true 3 The maximum number of noinput events allowed during digits input confirmation. 0 = infinite noinputs allowed. int 0 Yes true true 3 The maximum number of nomatch events allowed during digits input confirmation. 0 = infinite Copyright Audium Corporation. All Rights Reserved. 1/14/05 34

Cisco CVP VoiceXML 3.1. Installation Guide

Cisco CVP VoiceXML 3.1. Installation Guide Cisco CVP VoiceXML 3.1 CISCO CVP VOICEXML 3.1 Publication date: October 2005 Copyright (C) 2001-2005 Audium Corporation. All rights reserved. Distributed by Cisco Systems, Inc. under license from Audium

More information

Menu Support for 2_Option_Menu Through 10_Option_Menu

Menu Support for 2_Option_Menu Through 10_Option_Menu Menu Support for 2_Option_Menu Through 10_Option_Menu These voice elements define menus that support from 2 to 10 options. The Menu voice elements are similar to the Form voice element, however the number

More information

Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 11.6(1)

Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 11.6(1) Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 11.6(1) First Published: 2017-08-24 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose,

More information

Cisco CVP VoiceXML 3.0. Programmer Guide

Cisco CVP VoiceXML 3.0. Programmer Guide Cisco CVP VoiceXML 3.0 CISCO CVP VOICEXML 3.0 Publication date: 14 January 2005 Copyright (C) 2000-2005 Audium Corporation. All rights reserved. Distributed by Cisco Systems, Inc. under license from Audium

More information

Form. Settings, page 2 Element Data, page 7 Exit States, page 8 Audio Groups, page 9 Folder and Class Information, page 9 Events, page 10

Form. Settings, page 2 Element Data, page 7 Exit States, page 8 Audio Groups, page 9 Folder and Class Information, page 9 Events, page 10 The voice element is used to capture any input from the caller, based on application designer-specified grammars. The valid caller inputs can be specified either directly in the voice element settings

More information

Cisco CVP VoiceXML 3.0. Say It Smart Specifications

Cisco CVP VoiceXML 3.0. Say It Smart Specifications Cisco CVP VoiceXML 3.0 Say It Smart Specifications CISCO CVP VOICEXML 3.0 Say It Smart Specifications Publication date: 14 January 2005 Copyright (C) 2000-2005 Audium Corporation. All rights reserved.

More information

Cisco CVP VoiceXML 3.0. User Guide

Cisco CVP VoiceXML 3.0. User Guide Cisco CVP VoiceXML 3.0 Publication date: 14 January 2005 Copyright (C) 2000-2005 Audium Corporation. All rights reserved. Distributed by Cisco Systems, Inc. under license from Audium Corporation. Customer

More information

Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 9.0(1)

Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 9.0(1) Element Specifications for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 9.0(1) First Published: July 06, 2012 Last Modified: vember 27, 2014 Americas Headquarters Cisco Systems,

More information

Release Notes for the Catalyst 3750, 3550, 2970, 2955, 2950, and 2950 LRE Switches, Cisco IOS Release 12.1(14)EA1a

Release Notes for the Catalyst 3750, 3550, 2970, 2955, 2950, and 2950 LRE Switches, Cisco IOS Release 12.1(14)EA1a Release Notes for the Catalyst 3750, 3550, 2970, 2955, 2950, and 2950 LRE Switches, Cisco IOS Release 12.1(14)EA1a September 8, 2002 Cisco IOS Release 12.1(14)EA1a runs on these switches: Catalyst 3750

More information

Record_With_Confirm. Settings

Record_With_Confirm. Settings The voice element combines the functionality of the Record voice element with that of the Menu voice element. The voice element records the caller s voice, then prompts the caller to confirm that the recording

More information

Release Notes for Cisco Aironet Client Utility and Driver, Version 3.0 for Mac OS

Release Notes for Cisco Aironet Client Utility and Driver, Version 3.0 for Mac OS Release s for Cisco Aironet Client Utility and Driver, Version 3.0 for Mac OS Contents This document contains the following sections: Introduction, page 2 System Requirements, page 2 New Software Features

More information

Preface. Purpose. Audience

Preface. Purpose. Audience This preface describes the purpose, audience, organization, and conventions of this guide, and provides information on how to obtain related documentation. The preface covers these topics: Purpose, page

More information

Cisco IP Phone 7960, 7940, and 7910 Series Release Notes for Firmware Release 5.0(1a) for Cisco CallManager Versions 3.1, 3.2, and 3.

Cisco IP Phone 7960, 7940, and 7910 Series Release Notes for Firmware Release 5.0(1a) for Cisco CallManager Versions 3.1, 3.2, and 3. Cisco IP Phone 7960, 7940, and 7910 Series Release Notes for Firmware Release 5.0(1a) for Cisco CallManager Versions 3.1, 3.2, and 3.3 Use these release notes with the P00305000101 and P00405000101 firmware

More information

Release Notes for Cisco Secure User Registration Tool Release 2.0.7

Release Notes for Cisco Secure User Registration Tool Release 2.0.7 Release Notes for Cisco Secure User Registration Tool Release 2.0.7 These release notes are for use with User Registration Tool (URT) release 2.0.7. These release notes provide the following information:

More information

Release Notes for Cisco Aironet Configuration Administration Tool (ACAT) 1.4

Release Notes for Cisco Aironet Configuration Administration Tool (ACAT) 1.4 Release s for Cisco Aironet Configuration Administration Tool (ACAT) 1.4 May 2004 These release notes describe the caveats in this software maintenance release for the Cisco Aironet Configuration Administration

More information

CIC Availability Measurement CDB

CIC Availability Measurement CDB CIC Availability Measurement CDB Document Release History Publication Date May 9, 2008 Comments Initial version of the document. Feature History Release Modification 9.4(1) This feature was introduced

More information

Catalyst 2955 Switch DIN Rail Clip Installation Notes

Catalyst 2955 Switch DIN Rail Clip Installation Notes Catalyst 955 Switch DIN Rail Clip Installation Notes These installation notes provide updated installation and removal instructions for the DIN rail clip on the Catalyst 955 switch. Note For installation,

More information

Release Notes for Cisco Aironet Client Utility and Driver, Version for Mac OS

Release Notes for Cisco Aironet Client Utility and Driver, Version for Mac OS Release s for Cisco Aironet Client Utility and Driver, Version 3.0.1 for Mac OS Contents This document contains the following sections: Introduction, page 2 System Requirements, page 2 Upgrading to a New

More information

Record. Settings. Settings, page 1 Element Data, page 5 Exit States, page 5 Audio Groups, page 6 Folder and Class Information, page 6 Events, page 6

Record. Settings. Settings, page 1 Element Data, page 5 Exit States, page 5 Audio Groups, page 6 Folder and Class Information, page 6 Events, page 6 The voice element makes a recording of the caller's voice. A prompt is played to the caller then the voice element records the caller s voice until a termination key is inputted, the recording time limit

More information

Release Notes for Cisco Wireless Manager, Release 1.0 and Cisco Broadband Troubleshooter

Release Notes for Cisco Wireless Manager, Release 1.0 and Cisco Broadband Troubleshooter Release Notes for Cisco Wireless Manager, Release 1.0 and Cisco Broadband Troubleshooter Contents Caveats for the Cisco Wireless Manager, Release 1.0, page 1 Caveat for the Cisco Broadband Troubleshooter,

More information

Voice Foundation Classes

Voice Foundation Classes The Unified CVP are a Java API for generating VoiceXML. Any custom component wishing to produce VoiceXML must use the VFCs because their main purpose is to act as an abstraction layer between VoiceXML

More information

Release Notes for Cisco SIP and MGCP IP Phone 7940/7960 Release 3.1

Release Notes for Cisco SIP and MGCP IP Phone 7940/7960 Release 3.1 Release Notes for Cisco SIP and MGCP IP Phone 7940/7960 Release 3.1 March 15, 2002 Contents This document lists the known problems in the Cisco Session Initiation Protocol (SIP) and Media Gateway Control

More information

Preface. Purpose. Audience

Preface. Purpose. Audience This preface describes the purpose, audience, organization, and conventions of this guide, and provides information on how to obtain related documentation. The preface covers these topics: Purpose, page

More information

Release Notes for Cisco Aironet Client Utilities, Version 2.0.x for Linux

Release Notes for Cisco Aironet Client Utilities, Version 2.0.x for Linux Release s for Cisco Aironet Client Utilities, Version 2.0.x for Linux Contents This document contains the following sections: System Requirements, page 2 New and Changed Information, page 2 Installing

More information

Release Notes for Cisco CallManager Extended Services 2.2

Release Notes for Cisco CallManager Extended Services 2.2 Release Notes for Cisco CallManager Extended Services 2.2 Cisco CallManager Extended Services 2.2 was introduced with Cisco CallManager 3.1 and runs on Cisco Customer Response Applications (CRA) 2.2. Cisco

More information

Release Notes for Cisco Aironet Client Utilities, Version for Macintosh

Release Notes for Cisco Aironet Client Utilities, Version for Macintosh Release Notes for Cisco Aironet Client Utilities, Version 1.0.2 for Macintosh Contents This document contains the following sections: Introduction, page 1 System Requirements, page 1 Upgrading to a New

More information

Cisco VG248 Analog Phone Gateway Version 1.0(1) Release Notes

Cisco VG248 Analog Phone Gateway Version 1.0(1) Release Notes Cisco VG248 Analog Phone Gateway Version 1.0(1) Release Notes October 4, 2001 These release notes are for use with the Cisco VG248 Analog Phone Gateway with software version 1.0(1). The VG248 enables you

More information

Configuring Cisco IOS IP SLAs DNS Operations

Configuring Cisco IOS IP SLAs DNS Operations Configuring Cisco IOS IP SLAs DNS Operations First Published: August 14, 2006 Last Updated: January 6, 2011 This module describes how to configure the Cisco IOS IP Service Level Agreements (SLAs) Domain

More information

Release Notes for Cisco Aironet Client Adapter Drivers, Version for Macintosh

Release Notes for Cisco Aironet Client Adapter Drivers, Version for Macintosh Release Notes for Cisco Aironet Client Adapter Drivers, Version 1.0.2 for Macintosh Contents This document contains the following sections: Introduction, page 1 System Requirements, page 2 Upgrading to

More information

Cisco IP Manager Assistant User Guide

Cisco IP Manager Assistant User Guide Cisco IP Manager Assistant User Guide Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100

More information

Cisco WebAttendant User Guide

Cisco WebAttendant User Guide Cisco CallManager Release 3.2 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer

More information

Preface. Purpose. For more information on the topics that are provided in this guide, see the Organization section on page ii. Tip

Preface. Purpose. For more information on the topics that are provided in this guide, see the Organization section on page ii. Tip Preface This preface describes the purpose, audience, organization, and conventions for this guide and provides information on how to obtain related documentation: Purpose, page i Audience, page ii Organization,

More information

Release Notes for Cisco Aironet Client Utilities, Version for Windows

Release Notes for Cisco Aironet Client Utilities, Version for Windows Release s for Cisco Aironet Client Utilities, Version 5.02.005 for Windows Contents This document contains the following sections: Introduction, page 1 System Requirements, page 2 Installing or Upgrading

More information

Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware

Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware Release s for Cisco Aironet 350 and CB20A Client Adapter Firmware 5.41.00 Contents This document contains the following sections: Introduction, page 2 System Requirements, page 2 Important s, page 2 Upgrading

More information

Release Notes for the Cisco 575 LRE CPE

Release Notes for the Cisco 575 LRE CPE July 00 This document provides corrections to the Cisco 7 LRE CPE Hardware Installation Guide and includes new information about connecting a telephone to the CPE. Use this document with the Cisco 7 LRE

More information

Release Notes for Cisco Aironet Client Adapter Firmware

Release Notes for Cisco Aironet Client Adapter Firmware Release Notes for Cisco Aironet Client Adapter Firmware Contents This document contains the following sections: Introduction, page 1 System Requirements, page 2 Upgrading to a New Firmware Release, page

More information

Release Notes for the Cisco VPN Client Version for Linux, Solaris, and Mac OS X

Release Notes for the Cisco VPN Client Version for Linux, Solaris, and Mac OS X Release Notes for the Cisco VPN Client Version 3.5.1 for Linux, Solaris, and Mac OS X February 4, 2002 These release notes provide information about the Cisco VPN Client Version 3.5.1 for Linux, Solaris,

More information

Speaker Verification in BeVocal VoiceXML

Speaker Verification in BeVocal VoiceXML Speaker Verification in BeVocal VoiceXML Version 1.5 May 2001 BeVocal, Inc. 1380 Bordeaux Drive Sunnyvale, CA 94089 2001. BeVocal, Inc. All rights reserved. 2 SPEAKER VERIFICATION IN BEVOCAL VOICEXML Table

More information

barge In option 127 bigdecimal variables 16 biginteger variables 16 boolean variables 15 business hours step 100

barge In option 127 bigdecimal variables 16 biginteger variables 16 boolean variables 15 business hours step 100 A aa_sample1.aef file 25 aa script 1 acceptable digits, specifying 137 accept step 67 annotate step 99 attach to fax step 95 auto attendant sample script 1 B barge In option 127 bigdecimal variables 16

More information

Cisco IP/VC 3544 Chassis Replacement Power Supply Unit Release Note

Cisco IP/VC 3544 Chassis Replacement Power Supply Unit Release Note Cisco IP/VC 3544 Chassis Replacement Power Supply Unit Release Note March, 2001 This document describes how to install a replacement power supply unit (see Figure 1) in the IP/VC 3544 chassis. Figure 1

More information

Cisco Compact EGC GaN Segmentable Node A90201 System Release Release Note

Cisco Compact EGC GaN Segmentable Node A90201 System Release Release Note Cisco Compact EGC GaN Segmentable Node A90201 System Release 1.01.05 Release Note Overview This system release supports the Compact EGC GaN Segmentable Node A90201. It incorporates the fixes for the node.

More information

Release Notes for Cisco Unified Call Services, Universal Edition 6.0(1) and Unified Call Studio 6.0(1)

Release Notes for Cisco Unified Call Services, Universal Edition 6.0(1) and Unified Call Studio 6.0(1) Release Notes for Cisco Unified Call Services, Universal Edition 6.0(1) and Unified Call Studio 6.0(1) November 2007 Content Introduction, page 1 System Requirements, page 2 Related Documentation, page

More information

SurVo. Stepping Through the Basics. Version 2.0

SurVo. Stepping Through the Basics. Version 2.0 Stepping Through the Basics Version 2.0 Contents What is a SurVo?... 3 SurVo: Voice Survey Form... 3 About the Documentation... 3 Ifbyphone on the Web... 3 Setting up a SurVo... 4 Speech/Recording Options...

More information

Introduction. VoiceXML overview. Traditional IVR technologies limitations

Introduction. VoiceXML overview. Traditional IVR technologies limitations Introduction Welcome to Cisco Unified Customer Voice Portal (Unified CVP), the most robust platform for building exciting, dynamic VoiceXML-based voice applications. Unified CVP: Allows users to build

More information

Authors Martin Eckert Ingmar Kliche Deutsche Telekom Laboratories.

Authors Martin Eckert Ingmar Kliche Deutsche Telekom Laboratories. Workshop on speaker biometrics and VoiceXML 3.0 March 5-6, 2009, Menlo Park, CA, US Proposal of an SIV architecture and requirements Authors Martin Eckert (martin.eckert@telekom.de), Ingmar Kliche (ingmar.kliche@telekom.de),

More information

Installing High-Speed Serial Interface (HSSI) Cables

Installing High-Speed Serial Interface (HSSI) Cables Text Part Number: Document Part Number: 78-4260-05 DOC-784260= Installing High-Speed Serial Interface (HSSI) Cables Product Numbers: CAB-HSI1=, CAB-HNUL= Customer Order Number: DOC-784260= This document

More information

ALI Formatting Tool User Guide for SBC Southwestern Bell Copyright 2003, Cisco Systems, Inc. All rights reserved.

ALI Formatting Tool User Guide for SBC Southwestern Bell Copyright 2003, Cisco Systems, Inc. All rights reserved. ALI Formatting Tool User Guide for SBC Southwestern Bell Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS

More information

Cisco Voice Provisioning Tool User and Phone Management Guide

Cisco Voice Provisioning Tool User and Phone Management Guide Cisco Voice Provisioning Tool User and Phone Management Guide Release 1.0 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000

More information

Catalyst 6500 Series Switch SSL Services Module Installation and Verification Note

Catalyst 6500 Series Switch SSL Services Module Installation and Verification Note Catalyst 00 Series Switch SSL Services Module Installation and Verification Note Product number: WS-SVC-SSL- This document provides installation procedures for the Catalyst 00 series SSL Services Module

More information

Application Notes for Deploying a VoiceXML Application Using Avaya Interactive Response and Audium Studio - Issue 1.0

Application Notes for Deploying a VoiceXML Application Using Avaya Interactive Response and Audium Studio - Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Deploying a VoiceXML Application Using Avaya Interactive Response and Audium Studio - Issue 1.0 Abstract These Application Notes provide

More information

Cisco Compact EGC GaN Segmentable Node A90201 System Release Release Note

Cisco Compact EGC GaN Segmentable Node A90201 System Release Release Note Cisco Compact EGC GaN Segmentable Node A90201 System Release 1.00.06 Release Note Overview This system release supports the Compact EGC GaN Segmentable Node A90201. It incorporates the fixes for the node.

More information

Release Notes for Cisco SIP IP Phone 7940/7960 Release 6.0

Release Notes for Cisco SIP IP Phone 7940/7960 Release 6.0 Release Notes for Cisco SIP IP Phone 7940/7960 Release 6.0 June 22, 2004 Contents This document lists the known problems in Cisco Session Initiation Protocol (SIP) IP Phone 7940/7960 Release 6.0 and contains

More information

Release Notes for Cisco Aironet 340 Series Base Stations with Firmware Release 8.51

Release Notes for Cisco Aironet 340 Series Base Stations with Firmware Release 8.51 Release Notes for Cisco Aironet 340 Series Base Stations with Firmware Release 8.51 January 15, 2001 Contents Introduction, page 1 System Requirements, page 2 Important Notes, page 2 Caveats, page 4 Obtaining

More information

Customer Access. Partner Initiated PICA - The Cisco PICA User Guide

Customer Access. Partner Initiated PICA - The Cisco PICA User Guide PICA - Partner Initiated Customer Access The Cisco PICA User Guide Table of Contents PICA User Guide TABLE OF CONTENTS...2 ABOUT THIS GUIDE...4 BENEFITS OF USING THE PICA TOOL...4 USING THE PICA TOOL...4

More information

Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware

Release Notes for Cisco Aironet 350 and CB20A Client Adapter Firmware Release s for Cisco Aironet 350 and CB20A Client Adapter Firmware 5.60.08 Contents This document contains the following sections: Introduction, page 1 System Requirements, page 2 Important s, page 2 New

More information

Readme for Dial-Only Dial Feature Card

Readme for Dial-Only Dial Feature Card This document describes the dial-only dial feature card (DFC) on the Cisco AS5350XM and Cisco AS5400XM universal gateways and contains the following sections: Overview, page 1 Viewing Dial-Only DFC Status

More information

User Guide for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 10.5(1)

User Guide for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 10.5(1) User Guide for Cisco Unified CVP VXML Server and Cisco Unified Call Studio Release 10.5(1) First Published: 2014-06-18 Last Modified: 2015-09-01 Americas Headquarters Cisco Systems, Inc. 170 West Tasman

More information

MRCP. Google SR Plugin. Usage Guide. Powered by Universal Speech Solutions LLC

MRCP. Google SR Plugin. Usage Guide. Powered by Universal Speech Solutions LLC Powered by Universal Speech Solutions LLC MRCP Google SR Plugin Usage Guide Revision: 6 Created: May 17, 2017 Last updated: January 22, 2018 Author: Arsen Chaloyan Universal Speech Solutions LLC Overview

More information

Version 2.6. SurVo Advanced User s Guide

Version 2.6. SurVo Advanced User s Guide Version 2.6 SurVo Advanced User s Guide Contents What is a SurVo?...3 SurVo: Voice Survey Form...3 About the Documentation...3 Ifbyphone on the Web...3 Setting up a SurVo...4 Speech/Recording Options...4

More information

CVP 40 EVAL, CVP 40 DISTI, CVP 40 DART, CVP 41 EVAL,CVP 41 DIST NFR, CVP 41 DART NFR, CVP 70 EVAL, CVP 70 DIST NFR

CVP 40 EVAL, CVP 40 DISTI, CVP 40 DART, CVP 41 EVAL,CVP 41 DIST NFR, CVP 41 DART NFR, CVP 70 EVAL, CVP 70 DIST NFR Troubleshooting CVP 40 EVAL, CVP 40 DISTI, CVP 40 DART, CVP 41 EVAL,CVP 41 DIST NFR, CVP 41 DART NFR, CVP 70 EVAL, CVP 70 DIST NFR and CVP 70 DART NFR Licensing Issue Document ID: 99709 Contents Introduction

More information

Speech Applications. How do they work?

Speech Applications. How do they work? Speech Applications How do they work? What is a VUI? What the user interacts with when using a speech application VUI Elements Prompts or System Messages Prerecorded or Synthesized Grammars Define the

More information

Release Notes for Cisco MGCP IP Phone 7960G/ 7940G Release 7.6

Release Notes for Cisco MGCP IP Phone 7960G/ 7940G Release 7.6 Release Notes for Cisco MGCP IP Phone 7960G/ 7940G Release 7.6 April 4, 2006 Contents This document lists known problems resolved in Release 7.6 for the Cisco Media Gateway Control Protocol (MGCP) IP Phone

More information

MRCP. Kaldi SR Plugin. Usage Guide. Powered by Universal Speech Solutions LLC

MRCP. Kaldi SR Plugin. Usage Guide. Powered by Universal Speech Solutions LLC Powered by Universal Speech Solutions LLC MRCP Kaldi SR Plugin Usage Guide Revision: 1 Created: February 6, 2018 Last updated: February 6, 2018 Author: Arsen Chaloyan Universal Speech Solutions LLC Overview

More information

White Paper: Using Microsoft Windows Server 2003 with Cisco Unity 4.0(4)

White Paper: Using Microsoft Windows Server 2003 with Cisco Unity 4.0(4) White Paper: Using Microsoft Windows Server 2003 with Cisco Unity 4.0(4) Revised July 30, 2004 This white paper explains the differences between installing Cisco Unity version 4.0(4) on a server running

More information

Cisco Unity Express 8.0 Voic System User s Guide for Advanced Features

Cisco Unity Express 8.0 Voic System User s Guide for Advanced Features Cisco Unity Express 8.0 Voice-Mail System User s Guide for Advanced Features First Published: October 26, 2010 This guide provides information about using some of the advanced voice-mail features of your

More information

Cisco Unity Express Voic System User s Guide

Cisco Unity Express Voic System User s Guide Cisco Unity Express Voice-Mail System User s Guide Release 2.1 This guide provides information about some advanced voice-mail features of your Cisco Unity Express voice-mail system. Use this guide together

More information

Cisco Customer Response Solutions Historical Reports User Guide

Cisco Customer Response Solutions Historical Reports User Guide Cisco Customer Response Solutions Historical Reports User Guide Cisco IPCC Express, Cisco IP IVR, and Cisco IP QM, Release 4.0(1) January, 2005 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman

More information

Cisco Unified CallConnector Mobility Service Technical Overview

Cisco Unified CallConnector Mobility Service Technical Overview Cisco Unified CallConnector Mobility Service This document provides detailed information on the features, operation, configuration and troubleshooting for the Cisco Unified CallConnector Mobility Service

More information

Advanced Scripting Techniques

Advanced Scripting Techniques Advanced Scripting Techniques This chapter describes advanced variables and techniques you can use when designing custom scripts in the Cisco Unity Express Script Editor. This chapter contains the following

More information

Release Notes for Cisco Aironet Client Utilities 2.22 and Driver 2.30 for Windows CE 2.11

Release Notes for Cisco Aironet Client Utilities 2.22 and Driver 2.30 for Windows CE 2.11 Release s for Cisco Aironet Client Utilities 2.22 and Driver 2.30 for Windows CE 2.11 Contents This document contains the following sections: Introduction, page 1 System Requirements, page 2 Upgrading

More information

Cisco TEO Adapter Guide for Microsoft System Center Operations Manager 2007

Cisco TEO Adapter Guide for Microsoft System Center Operations Manager 2007 Cisco TEO Adapter Guide for Microsoft System Center Operations Manager 2007 Release 2.3 April 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com

More information

VClarity Voice Platform

VClarity Voice Platform VClarity Voice Platform VClarity L.L.C. Voice Platform Snap-in Functional Overview White Paper Technical Pre-release Version 2.0 for VClarity Voice Platform Updated February 12, 2007 Table of Contents

More information

Designing an Auto Attendant Script

Designing an Auto Attendant Script Designing an Auto Attendant Script This chapter describes the design of an Auto Attendant (AA) script, aa_sample1.aef, which is included with the Cisco Unity Express Script Editor, and contains the following

More information

Cisco TEO Adapter Guide for Microsoft Windows

Cisco TEO Adapter Guide for Microsoft Windows Cisco TEO Adapter Guide for Microsoft Windows Release 2.3 April 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800

More information

Script Step Reference Information

Script Step Reference Information Script Step Reference Information This chapter lists all the steps available for use in creating scripts. These steps are accessed using the palette pane (see Using the Palette Pane, page 8). This chapter

More information

MRCP. PocketSphinx Plugin. Usage Guide. Powered by Universal Speech Solutions LLC

MRCP. PocketSphinx Plugin. Usage Guide. Powered by Universal Speech Solutions LLC Powered by Universal Speech Solutions LLC MRCP PocketSphinx Plugin Usage Guide Revision: 3 Created: February 16, 2017 Last updated: May 20, 2017 Author: Arsen Chaloyan Universal Speech Solutions LLC Overview

More information

Version 2.7. Audio File Maintenance Advanced User s Guide

Version 2.7. Audio File Maintenance Advanced User s Guide Version 2.7 Audio File Maintenance Advanced User s Guide Contents Introduction to the Documentation...3 About the Documentation...3 Ifbyphone on the Web...3 Logging in to your Ifbyphone Account...3 Maintaining

More information

Cisco Network-Based IPSec VPN Solution Release 1.5 Solution Operations, Maintenance, and Troubleshooting Guide

Cisco Network-Based IPSec VPN Solution Release 1.5 Solution Operations, Maintenance, and Troubleshooting Guide Cisco Network-Based IPSec VPN Solution Release 1.5 Solution Operations, Maintenance, and Troubleshooting Guide May, 2003 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706

More information

Cisco Internet Router Cable Management Bracket Replacement Instructions

Cisco Internet Router Cable Management Bracket Replacement Instructions Cisco 1244 Internet Router Cable Management Bracket Replacement Instructions Product Number: ACS-GSR4-CCBLM= Document Order Number: DOC-7813622= This document gives you instructions for removing and replacing

More information

LABORATORY 117. Intorduction to VoiceXML (3)

LABORATORY 117. Intorduction to VoiceXML (3) LABORATORY 117 Intorduction to VoiceXML (3) 1 TAC2000/2000 Delivering Content Collecting User Input Main Topics 2 TAC2000/2000 %$ %$!! 802.16 IP Telephone Lab #" " The element has several attributes bargein

More information

User Guide for Cisco Device Assignment Tool

User Guide for Cisco Device Assignment Tool First Published: March 19, 2015 Last Modified: July 16, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS

More information

Cisco Partner Support Service (PSS) User Guide - User Registration. April 07,

Cisco Partner Support Service (PSS) User Guide - User Registration. April 07, Cisco Partner Support Service (PSS) User Guide - User Registration April 07, 2017 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com 1-1 Table

More information

RSVP Support for RTP Header Compression, Phase 1

RSVP Support for RTP Header Compression, Phase 1 RSVP Support for RTP Header Compression, Phase 1 The Resource Reservation Protocol (RSVP) Support for Real-Time Transport Protocol (RTP) Header Compression, Phase 1 feature provides a method for decreasing

More information

About This Manual. Objectives. Audience

About This Manual. Objectives. Audience About This Manual Welcome to the command line interface (CLI) reference for the Cisco MGX 8950 and MGX 8850 wide area routing switches, Release 2.1. This chapter discusses: Objectives Audience Organization

More information

Cisco Instant Connect MIDlet Reference Guide

Cisco Instant Connect MIDlet Reference Guide Cisco Instant Connect MIDlet Reference Guide Cisco IPICS 4.7 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS

More information

PPPoE Session Recovery After Reload

PPPoE Session Recovery After Reload If the PPP keepalive mechanism is disabled on a customer premises equipment (CPE) device, a PPP over Ethernet (PPPoE) session will hang indefinitely after an aggregation device reload. The PPPoE Session

More information

Enterprise Chat and Supervisor s Guide, Release 11.5(1)

Enterprise Chat and  Supervisor s Guide, Release 11.5(1) Enterprise Chat and Email Supervisor s Guide, Release 11.5(1) For Unified Contact Center Enterprise August 2016 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA

More information

OSPF Incremental SPF

OSPF Incremental SPF OSPF Incremental SPF The Open Shortest Path First (OSPF) protocol can be configured to use an incremental SPF algorithm for calculating the shortest path first routes. Incremental SPF is more efficient

More information

Dialed Number Analyzer for Cisco Unified Communications Manager, Release 11.0(1)

Dialed Number Analyzer for Cisco Unified Communications Manager, Release 11.0(1) Dialed Number Analyzer for Cisco Unified Communications Manager, Release 11.0(1) First Published: June 08, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA

More information

ATTENDANT USER GUIDE

ATTENDANT USER GUIDE ATTENDANT USER GUIDE NOTICE THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information contained in this document is believed by Mitel Networks to be accurate as of the date of its

More information

VoiceXML Studio User Guide for Cisco Unified Customer Voice Portal

VoiceXML Studio User Guide for Cisco Unified Customer Voice Portal VoiceXML Studio User Guide for Cisco Unified Customer Voice Portal Release 4.0(1) February, 2007 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman D rive San Jose, CA 95134-1706 USA http://www.cisco.com

More information

Cisco CRM Communications Connector for Cisco CallManager Express

Cisco CRM Communications Connector for Cisco CallManager Express Cisco CRM Communications Connector for Cisco CallManager Express Cisco CRM Communications Connector (Cisco CCC) integrates Microsoft Customer Relationship Management (CRM) with Cisco CallManager Express

More information

IP SLAs Random Scheduler

IP SLAs Random Scheduler First Published: February 27, 2007 Last Updated: February 27, 2007 The feature is an enhancement to the existing IP SLAs Multiple Operation Scheduling feature. The IP SLAs Multiple Operation Scheduling

More information

Application Firewall Instant Message Traffic Enforcement

Application Firewall Instant Message Traffic Enforcement Application Firewall Instant Message Traffic Enforcement The Application Firewall Instant Message Traffic Enforcement feature enables users to define and enforce a policy that specifies which instant messenger

More information

Release Notes for the Cisco EnergyWise Orchestrator, EnergyWise Phase 2

Release Notes for the Cisco EnergyWise Orchestrator, EnergyWise Phase 2 Release Notes for the Cisco EnergyWise Orchestrator, EnergyWise Phase 2 Revised November 22, 2010 Unless otherwise noted, the term network device refers to Cisco switches, routers, access points and other

More information

PPP/MLP MRRU Negotiation Configuration

PPP/MLP MRRU Negotiation Configuration PPP/MLP MRRU Negotiation Configuration The PPP/MLP MRRU Negotiation Configuration feature allows a router to send and receive frames over Multilink PPP (MLP) bundles that are larger than the default Maximum

More information

Dialog Designer Call Flow Elements

Dialog Designer Call Flow Elements Dialog Designer Call Flow Elements A DevConnect Tutorial Table of Contents Section 1: Dialog Designer Call Flow Elements Section 1: Dialog Designer Call Flow Elements... 1 1.1 About this Tutorial When

More information

Cisco Internet Service Node (ISN) Configuration and Administration Guide

Cisco Internet Service Node (ISN) Configuration and Administration Guide Cisco Internet Service Node (ISN) Configuration and Administration Guide Internet Service Node (ISN) Release 2.0 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706

More information

RADIUS NAS-IP-Address Attribute Configurability

RADIUS NAS-IP-Address Attribute Configurability RADIUS NAS-IP-Address Attribute The RADIUS NAS-IP-Address Attribute feature allows you to configure an arbitrary IP address to be used as RADIUS attribute 4, NAS-IP-Address, without changing the source

More information

Application Notes for Nuance OpenSpeech Attendant with Avaya Voice Portal Issue 1.0

Application Notes for Nuance OpenSpeech Attendant with Avaya Voice Portal Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Nuance OpenSpeech Attendant with Avaya Voice Portal Issue 1.0 Abstract These Application Notes describe the configuration steps required

More information