For ClassPad 300. ClassPad Manager. (ProgramLink) Limited Version. User s Guide. RJA
|
|
|
- Brice Cooper
- 6 years ago
- Views:
Transcription
1 For ClassPad 300 E ClassPad Manager (ProgramLink) Limited Version User s Guide RJA
2 Note Display examples shown in this User s Guide are intended for illustrative purposes only. The actual text and values that appear on display may differ from the examples shown in this User s Guide. END-USER LICENSE AGREEMENT The copyright to this software is owned by CASIO COMPUTER CO., LTD. Copying of this software and its documentation, either in part or its entirety, is forbidden. You are allowed to install and use this software on one computer. Permission to use this software and user documentation is granted under the terms and conditions of this license agreement. CASIO COMPUTER CO., LTD. shall not be held liable to you or any third party for any loss suffered due to the use of this software or documentation. The specifications and documentation of this software are subject to change without notice.
3 Getting Started You can use ClassPad Manager to develop programs and eactivities using the same commands as those available on the ClassPad. You can store your programs and eactivities on your computer, and use the ClassPad Manager s data communication functions to transfer them to your ClassPad when you need them. Once you establish a link with your computer over the USB cable that comes bundled with the ClassPad, you can use easy-to-understand Microsoft Explorer-like operations to transfer data (programs, variable data, and eactivities) between them. You can transfer data by putting the ClassPad into its communication standby state and then performing all operations on your connected computer. ClassPad Manager provides the following capabilities. ClassPad emulation, which lets you perform ClassPad operations on your computer Transfer of data between your ClassPad and computer ClassPad data storage 180 days after the first time you start up the ClassPad Manager for ClassPad 300 (Limited Version), you will lose ClassPad emulation capabilities. However, you will still be able to transfer data between your ClassPad and computer, and store ClassPad data. These functions have no time limit. Important! Be sure to install the ClassPad Manager before you connect the ClassPad to your computer. Connecting before you install the ClassPad Manager can result in improper operation. Note Use only the USB cable that comes with ClassPad whenever connecting your ClassPad to a computer to exchange data between them. Data exchange with ClassPad Manager will not be possible if you use a commercially available serial cable. See your ClassPad User s Guide and Quick Start Guide for details about operating the on-screen virtual ClassPad unit. Note that you cannot send data to or receive data from the virtual ClassPad unit. Calculation results produced by ClassPad Manager may be different from those produced by the ClassPad. This is due to the way that computers perform floating-point calculations. Also, ClassPad Manager cannot handle values that exceed ±1E+300. User Registration Before using your ClassPad 300 or RM-ClassPad, be sure to read the contents of the file named Readme.html, which is on the bundled CD-ROM. There you will find the URL for a Website where you can register as an official user E-1
4 System Requirements Computer: Minimum required Intel Pentium II 200 with USB Recommended Intel Pentium II 300 with USB CPU: Minimum required Intel Pentium II or AMD Duron TM Operating Systems: Windows 98SE/Me or Windows 2000/XP Disk Space: 10 MB available for installation Memory: Recommended 32 MB (Minimum 16 MB) Does not include memory required for Operating System. Video Display: Video adaptor and monitor must support resolution of or higher. Other Required Application: Microsoft Internet Explorer 4.01 or later Note Company and product names used herein are trademarks of their respective owners. E
5 Contents 1. Installing the Software... E-4 Installing... E-4 Uninstalling... E-7 Connecting your ClassPad to a computer... E-8 Starting Up and Quitting ClassPad Manager... E ClassPad Manager Menu and Functions... E-13 ClassPad Manager Menu... E-13 LCD Window Menu... E Exchange Window Toolbar Buttons and Icons... E Exchange Window Menu Commands and Icons... E Transferring Files from the ClassPad to Your PC... E-22 ClassPad Operation... E-22 Using ClassPad Manager... E Adding a Flash Image or Memory Image... E-36 From the ClassPad Manager Screen... E-36 From the Exchange Window... E E-3
6 1. Installing the Software Installing Use the procedures in this section to install the ClassPad Manager. It is strongly recommended that you exit all Windows Programs before running the Install Wizard. k To install ClassPad Manager (ProgramLink) 1. Open the [ClassPad Manager] folder. 2. Double-click setup or setup.exe. Follow the instructions that appear on your computer screen. E
![1. Installing the Software 3. Click the [Next] button to advance to the next screen. 4.](/docs-images/74/70342758/images/7-0.jpg "Carefully read the terms and conditions of the license agreement. 5.")
7 1. Installing the Software 3. Click the [Next] button to advance to the next screen. 4. Carefully read the terms and conditions of the license agreement. 5. If you agree to the terms and conditions of the license agreement, click I accept the terms, and then click the [Next] button. If you do not agree to the terms and conditions of the license agreement, click I do not accept the terms and then click the [Cancel] button to exit the install procedure E-5
8 1. Installing the Software 6. Perform either of the following two operations to specify the drive and folder where you want to install ClassPad Manager. 6-a To use the default settings, simply click the [Next] button. 6-b To specify a different folder, click the Change button. Specify the folder you want, and then click the [Next] button. 7. Click the [Install] button to start installation. E
9 1. Installing the Software 8. On the screen that appears after installation is complete, click the [Finish] button. This finalizes installation of the software on your computer. Uninstalling Perform the following steps if you ever need to remove ClassPad Manager (ProgramLink) from your computer. k To uninstall 1. Display the Windows Control Panel. 2. Click [Add/Remove Programs]. 3. In the list of applications on the dialog box that appears, select Casio ClassPad Manager. 4. Click the [Add/Remove] button to start a program maintenance wizard. 5. Click the [Yes] button. This completes the uninstall procedure E-7
10 1. Installing the Software Connecting your ClassPad to a computer k To connect your ClassPad to a computer Important! Be sure to install the ClassPad Manager before you connect the ClassPad to your computer. Connecting before you install the ClassPad Manager can result in improper operation. 1. Turn off your ClassPad. 2. Use the USB cable that comes with your ClassPad to connect to the computer. 3. Connect the USB cable to your ClassPad. This will automatically cause your ClassPad to turn on and enter data communication standby. If your ClassPad does not enter communication standby at this time, perform the steps under step 3 on page E-24. Attention Windows XP Users See page E-9 after performing the above three steps. E
11 1. Installing the Software u Windows XP Users 1. Connecting ClassPad to a computer running Windows XP causes the screen shown below to appear on your computer display. 2. Select Install the software automatically (Recommended) and then click [Next] E-9
12 1. Installing the Software 3. Though a message appears to let you know that the software has not passed the Windows Logo Test, there is no need for concern. Simply click [Continue Anyway] and proceed with installation. 4. Click [Finish]. k To disconnect your ClassPad from a computer 1. Disconnect the USB cable from your ClassPad. E
13 1. Installing the Software Starting Up and Quitting ClassPad Manager The procedure you should use to start up and quit ClassPad Manager depends on whether or not you are within the 180-day trial period. k To star t up and quit ClassPad Manager during the 180-day trial period 1. On your computer s desktop, double-click ClassPad Manager. This starts up ClassPad Manager. 2. On ClassPad Manager, perform the data exchange and management tasks you want. 3. To quit ClassPad Manager, move the cursor to the ClassPad Manager window, right-click your mouse, and then select [Exit] on the shortcut menu that appears. You can also click o to quit ClassPad Manager. This quits ClassPad Manager E-11
14 1. Installing the Software k To start up and quit ClassPad Manager after the 180-day trial period has expired 1. On your computer s desktop, double-click ClassPad Manager. This starts up ClassPad Manager and causes the message Limited version expired to appear. 2. After reading the contents of the message box, click [OK]. 3. On the Exchange window, perform the data exchange and management tasks you want. 4. To quit ClassPad Manager, click [Close] on the [Files] menu, or click the close button in the upper right corner of the Exchange window. This quits ClassPad Manager. E
15 2. ClassPad Manager Menu and Functions ClassPad Manager Menu LCD Window Exchange Window Memory Image Flash Image (eactivity data) Paste Windows Text Capture Screen Displays a separate LCD Window. Displays the Exchange window. Displays a submenu that contains the following Memory Image commands: New, Open, Save, Save As, and Reset. Displays a submenu that contains the following Flash Image commands: New, Open, Save, and Save As. Pastes the text currently on the Windows clipboard. Captures a screenshot of the LCD and stores it on the Windows clipboard. Always on top Keeps the ClassPad Manager window and all of its sub-windows on top of all other windows. Minimize Minimizes the ClassPad Manager window. Zoom Zooms the ClassPad Manager image 1X or 2X. About ClassPad Manager Displays a dialog box that shows version and copyright information. Exit Exits ClassPad Manager E-13
16 2. ClassPad Manager Menu and Functions LCD Window Menu k LCD Window Shortcut Menu Right-clicking the LCD displays a shortcut menu that contains the same commands as the ClassPad Manager Menu, except for the [LCD Window] command. E
17 3. Exchange Window Toolbar Buttons and Icons The following describes the toolbar buttons and icons that appear on the Exchange window. Establishes a connection between your ClassPad and ClassPad Manager. Disconnects your ClassPad from the ClassPad Manager. Copies the currently selected file(s). Pastes copied file(s). Deletes the currently selected folder(s) or file(s). Creates a new folder. Displays variables and folders stored in memory. Displays eactivity folders and files. Transfers all ClassPad folders and files to the computer. Transfers all computer folders and files to the ClassPad. Icon for folders and files in the flash image (eactivity data). Icon for folders and files in the memory image. Icon for a folder. Icon for files or variables E-15
18 4. Exchange Window Menu Commands and Icons The following describes the commands of the shortcut menus that appear when you right-click on the Exchange window. k Right-clicking ClassPad Collapse/Expand Collapses/Expands the folder tree. Create New Folder Creates a new folder. k Right-clicking (ClassPad) Copy Copies the currently selected folder. Paste Pastes copied file. E
19 4. Exchange Window Menu Commands and Icons k Right-clicking (Computer) Copy Copies the currently selected folder. Paste Pastes copied file. Delete Deletes the currently selected folder. k Right-clicking (ClassPad) Copy Copies the currently selected file E-17
20 4. Exchange Window Menu Commands and Icons k Right-clicking (Computer) Copy Copies the currently selected file. Delete Deletes the currently selected file. k Right-clicking Computer Expand/Collapse Expands/Collapses the currently selected flash or memory image. Add New Image Adds a new image. Insert Existing Image Inserts an existing image. E
21 4. Exchange Window Menu Commands and Icons k Right-clicking or Expand/Collapse Expands/Collapses the folder tree. Remove Image Removes the currently selected image. Create New Folder Creates a new folder. Copy Copies the currently selected flash or memory image. Paste Pastes copied folder. Delete Deletes the currently selected flash or memory image. k Right-clicking the Space in Column Four, while Computer is Selected in Column Three Add New Image Adds a new image. Insert Existing Image Inserts an existing image E-19
22 4. Exchange Window Menu Commands and Icons k Right-clicking Blank Space Paste Pastes copied file. E
23 4. Exchange Window Menu Commands and Icons Create New Folder Creates a new folder. Paste Pastes copied folder E-21
24 5. Transferring Files from the ClassPad to Your PC First set up your ClassPad for data communication, and then perform the transfer operation on your computer using ClassPad Manager. ClassPad Operation Use the following procedure to put your ClassPad into a standby state for data communication. Note If your ClassPad is set up properly with USB chosen, it will automatically go into a standby state when you plug the USB cable into your ClassPad (if the USB cable is first connected to the PC). k To set up your ClassPad for data communication 1. Tap m to display the application menu. E
25 5. Transferring Files from the ClassPad to Your PC 2. Scroll down the Menu and tap B E-23
26 5. Transferring Files from the ClassPad to Your PC 3. If your screen looks different from the one shown on page E-23, perform steps 3-a through 3-d below. 3-a. Tap [Setup] and then choose [Open Setup Menu] from the pull-down menu. 3-b. Tap the Cable Type down arrow and choose [USB cable] from the pull-down menu. 3-c. Tap the Wakeup Enable down arrow and choose [On] from the pull-down menu. 3-d. Tap [Set] when you are finished. E
27 5. Transferring Files from the ClassPad to Your PC 4. Tap [Link] and then choose [Transmit] from the pull-down menu. Or you can tap the (Transmit) icon. 5. ClassPad is now ready to send eactivities to your PC E-25
28 5. Transferring Files from the ClassPad to Your PC If the message shown to the right appears, check your cable to make sure it is plugged in securely. Next, repeat steps 1 through 5 above. If the message shown to the right appears, too much time passed without any data communication after the ClassPad entered the standby state. Tap [Retry] to go back on standby and send eactivities to your PC. E
29 5. Transferring Files from the ClassPad to Your PC Using ClassPad Manager The following procedures explain how to perform various data transfer and other operations using ClassPad Manager. k To establish a connection between your ClassPad and ClassPad Manager 1. After setting up your ClassPad for data communication (page E-22), start up the ClassPad Manager. If the 180-day trial period has expired, skip from step 1 to step Move the cursor to the ClassPad Manager window and right-click your mouse. 3. Click [Exchange Window]. The Exchange window that appears has four columns. The two on the left (column one and column two) show information about your ClassPad, while the two on the right (column three and column four) show information about your computer E-27
30 5. Transferring Files from the ClassPad to Your PC 4. Click the (Connect) button on the [ClassPad] toolbar. (PC) At this time, your ClassPad screen will show this. 5. After the connection is established, your computer screen will show ClassPad folders in columns one and two, and flash or memory images will appear in columns three and four. E
31 5. Transferring Files from the ClassPad to Your PC Clicking a folder in column one displays the files contained in the folder in column two. To see the files in any folder, click the folder name in column one. Clicking a flash or memory image in column three displays the folders of the image in column four. To see the folders in any flash or memory image, click the image name or icon in column three. See the following for information about the various data transfer operations you can perform after establishing a connection E-29
32 5. Transferring Files from the ClassPad to Your PC k To transfer a single folder 1. Start up ClassPad Manager and establish a connection with your ClassPad. 2. In column one of the ClassPad Manager Exchange window, select the folder you want to transfer. To transfer the test folder (and its contents), click test. This will list its files in column two. You can also choose to create a new image. 3. Use your mouse to drag the selected folder to a flash or memory image in column three. When you release the mouse button, the copied folder will appear in column three. Clicking the folder displays its files in column four. 4. Repeat steps 2 and 3 to transfer more folders, if you want. 5. After you are finished, terminate the connection between your ClassPad and computer. E
33 5. Transferring Files from the ClassPad to Your PC k To transfer multiple folders 1. Start up ClassPad Manager and establish a connection with your ClassPad. 2. In column one of the ClassPad Manager Exchange window, click ClassPad. This displays the folders in column Select all of the folders you want to transfer. 4. Use your mouse to drag the selected folders to a flash or memory image in column three. When you release the mouse button, the copied folders will appear in column three. Clicking a folder displays its files in column four. Instead of transferring images to an existing image, you could also add a new image (page E-36) and transfer the images there. 5. Repeat steps 3 and 4 to transfer more folders, if you want. 6. After you are finished, terminate the connection between your ClassPad and computer E-31
34 5. Transferring Files from the ClassPad to Your PC k To transfer selected files to a folder 1. Start up ClassPad Manager and establish a connection with your ClassPad. 2. In column 2, select the file(s) you want to transfer. 3. In column 3, click the folder to which you want to transfer the file(s). Here you could create a new folder and transfer the file(s) to it, if you want. See To create a new folder on page E-33 for more information. E
35 5. Transferring Files from the ClassPad to Your PC 4. Drag the selected files in column 2 to the folder in column 3 or to the list of files in column 4. When you release the mouse button, the transferred files will appear in column four. 5. Repeat steps 2 through 4 to transfer more files, if you want. 6. After you are finished, terminate the connection between your ClassPad and computer. k To create a new folder 1. In column 3 of the Exchange window, click the flash or memory image where you want to create a new folder. 2. Click the (New Folder) button on the [Computer] toolbar E-33
36 5. Transferring Files from the ClassPad to Your PC 3. On the dialog box that appears, type in the name you want to assign to the new folder ([test] for this example) and then click [OK]. k To delete a flash or memory image, folder, or file 1. On the Exchange window, select the flash or memory image (column three), folder (column three or column four), or file (column four) you want to delete. 2. Click the (Delete) button on the [Computer] toolbar, or right-click and then select [Delete] on the shortcut menu that appears. 3. On the confirmation dialog box that appears, click [Yes] to delete or [No] to cancel. E
37 5. Transferring Files from the ClassPad to Your PC k To terminate the connection between your ClassPad and ClassPad Manager 1. After you are finished using ClassPad Manager, click the (Disconnect) button on the [ClassPad] toolbar. This will cause your ClassPad display to show this. Your computer screen will show this E-35
38 6. Adding a Flash Image or Memory Image You can add a flash image or memory image starting either from the ClassPad Manager screen, or from the Exchange window. Important! You will not be able to use the ClassPad Manager screen if the 180-day trial period is expired. In this case, you will only be able to use the Exchange window. See From the Exchange Window on page E-40. From the ClassPad Manager Screen Use the following procedures to add a flash image or a memory image from the ClassPad Manager screen. k To add a flash image from the ClassPad Manager screen 1. Right-click the ClassPad Manager and then select [Flash Image] / [New] on the shortcut menu that appears. E
39 6. Adding a Flash Image or Memory Image 2. Type in the name you want to assign to the image, and then click [Save] E-37
40 6. Adding a Flash Image or Memory Image k To add a memory image from the ClassPad Manager screen 1. Right-click ClassPad Manager, and then select [Memory Image] / [New] on the shortcut menu that appears. E
41 6. Adding a Flash Image or Memory Image 2. Type in the name you want to assign to the image, and then click [Save] E-39
42 6. Adding a Flash Image or Memory Image From the Exchange Window You can also add a flash image or memory image from the Exchange window. The following procedure shows how to add a flash image. The procedure for adding a memory image is virtually identical. k To add a flash image from the Exchange window 1. Right-click [Computer], and then select [Add New Image] from the shortcut menu that appears. Alternatively, you could right-click in column 4. E
43 6. Adding a Flash Image or Memory Image 2. Type in the name you want to assign to the image, and then click [Save] E-41
44 CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo , Japan SA0304-B
For ClassPad 300 PLUS. ClassPad Manager. Version 2.2 (PROGRAM-LINK TM ) User s Guide.
For ClassPad 300 PLUS E ClassPad Manager Version 2.2 (PROGRAM-LINK TM ) User s Guide RJA510188-4 http://world.casio.com/edu/ http://classpad.net/ Note Display examples shown in this User s Guide are intended
OS Update. Application. User s Guide. (ClassPad OS Version 3.04)
For ClassPad 330 E OS Update (ClassPad OS Version 3.04) Application User s Guide CASIO Education website URL http://edu.casio.com ClassPad website URL http://edu.casio.com/products/classpad/ ClassPad register
ClassPad Manager Subscription
For ClassPad II Series E ClassPad Manager Subscription (for Windows ) User s Guide CASIO Education website URL http://edu.casio.com Access the URL below and register as a user. http://edu.casio.com/dl/
User s Guide. Controller. Be sure to keep all user documentation handy for future reference.
E User s Guide Controller Be sure to keep all user documentation handy for future reference. Read this first! The contents of this User s Guide are subject to change without notice. Copying of this manual,
Multifunctional Presentation Kit YP-100
Multifunctional Presentation Kit YP-00 E User s Guide Be sure to read the precautions in the separate Getting Started Guide. The Getting Started Guide also includes information about connecting the YP-00
Installation Manual. Table of Contents. System Requirements. PC Phone Software. Model no. KX-TDA0350
PC Phone Software Installation Manual Model no. KX-TDA0350 Thank you for purchasing the Panasonic PC Phone Software, KX-TDA0350. Please read this manual before using this product and save for future use.
INSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
User s Manual. Touch Panel Driver. Important
User s Manual Touch Panel Driver Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document is
DISC TITLE PRINTER. Application Version User s Guide. For Windows
DISC TITLE PRINTER E Application Version 3.01 For Windows User s Guide We recommend that you print on a disc* before you record anything on it. Printing on a disc that already has data recorded on it can
Spectrometer Visible Light Spectrometer V4.4
Visible Light Spectrometer V4.4 Table of Contents Package Contents...3 Trademarks...4 Manual Driver and Application installation...5 Manual Application Installation...6 First Start of the Application...8
User s Manual. Touch Panel Setting Tool. Important
User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document
Printer Driver CASIO KL16H_EN
Printer Driver CASIO KL16H_EN EN For Windows User s Guide Configuring Advanced Printer Driver Settings Deleting or Renaming a Printer A printer driver is printer control software that makes it possible
BLUETOOTH 2.0 MINI USB ADAPTER. Quick Start Guide TABEL OF CONTENTS
BLUETOOTH 2.0 MINI USB ADAPTER Quick Start Guide All rights reserved. All trade names are registered trademarks of respective manufacturers listed. The Bluetooth name and the Bluetooth trademarks are owned
DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE
DRAWings 8 and Wings modular 8 Embroidery Software INSTALLATION GUIDE We thank you for purchasing DRAWings 6 and Wings modular 5 software. We are committed to providing you with the most innovative technology.
DATA PROJECTOR XJ-H1650/XJ-H1750 XJ-ST145/XJ-ST155
DATA PROJECTOR XJ-H1650/XJ-H1750 XJ-ST145/XJ-ST155 E Data Projector USB Function Guide Be sure to read the precautions in the separate Setup Guide. Be sure to keep all user documentation handy for future
Network Connection Guide
EN MA1703-A Network Connection Guide Be sure to keep all user documentation handy for future reference. To obtain the latest version of this manual visit the website at the URL below. http://world.casio.com/manual/projector/
DriveWizard Plus Instruction Manual
DriveWizard Plus Instruction Manual To properly use the product, read this manual thoroughly. MANUAL NO. TOEP C730600 20C Table of Contents Safety Symbols and Markings...4 Manual Overview...5 Related Manuals...5
FA-B30 Version 1.0 Basic Label Printing Software
FA-B30 Version 1.0 Basic Label Printing Software For Windows User s Guide This Label Printing Software can be used with a number of different Basic Label Printer models. See page 11 of this manual for
USB driver and Software Installation. UPS Monitoring and Management Software
USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver
User s Manual. Touch Panel Setting Tool. Important
User s Manual Touch Panel Setting Tool Important Please read the Precautions and this User s Manual carefully to familiarize yourself with safe and effective usage. The software described in this document
Panaboard Overlayer User's Guide. Image Capture Software for Electronic Whiteboard (Panaboard)
Panaboard Overlayer User's Guide Image Capture Software for Electronic Whiteboard (Panaboard) Contents Introduction... 3 Functional Overview... 3 Operation Flow... 3 Abbreviations... 4 Trademarks... 4
Utility Software Data Connection For 62S Instruction Manual
(E-Rev1) Utility Software Data Connection For 62S Instruction Manual Please read this instruction manual carefully before installation. LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura
Installing AppleWorks 6 FOR WINDOWS
apple Installing AppleWorks 6 FOR WINDOWS 1 Installing AppleWorks 6 This booklet provides instructions for m installing and uninstalling AppleWorks m setting up an AppleWorks Installer on a server, so
GP-N100 Utility Software Manual
System Requirements En Thank you for your purchase of a GP-N100. This manual describes how to use the GP-N100 Utility to download the latest assisted GPS data from Nikon servers to your GP-N100. To ensure
App for a Smartphone or Tablet Terminal EXILIM Connect 2.0
App for a Smartphone or Tablet Terminal EXILIM Connect 2.0 User s Guide EN This manual uses a typical CASIO camera and smartphone for explanations. Certain details (display contents, etc.) may differ on
Utility Software Data Connection For 22S Instruction Manual
(E-Rev1) Utility Software Data Connection For 22S Instruction Manual Please read this instruction manual carefully before installation. LICENSE AGREEMENT READ THE TERMS OF THIS AGREEMENT CAREFULLY. Fujikura
eturboware 4.x For Windows 2000/XP User s Guide Part No: M , Ver:1.0
eturboware 4.x For Windows 2000/XP User s Guide Part No: M3-000016, Ver:1.0 The information in this document is subject to change without notice. No part of this document may be reproduced or transmitted
3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System. Version 4.4 Software Installation Guide (Full) 1 P age
3M Occupational Health and Environmental Safety 3M E-A-Rfit Validation System Version 4.4 Software Installation Guide (Full) 1 P age Contents Important Information Read First... 3 Software Installation
Xacti Software CD 1.3 For Dual Camera INSTRUCTION MANUAL
Xacti Software CD 1.3 For Dual Camera INSTRUCTION MANUAL Please read these instructions carefully before using. Be sure to keep this manual for later reference. ATTENTION Regarding permission to use the
AFP Digital
Installation Guide AFP Digital Installation Guide Page 2 Contents Overview...... 3 System Requirements... 5 Installing the EVA Hardware Driver... 6 AFP Digital Installation... 14 Installing AFP Digital
ZwCAD Licensing Guide. Contents
Contents Stand-alone license...2 Overview...2 Step 1 - Install ZwCAD 2006...2 Step 2 - Install ZwCAD Dongle...2 Step 3 - Register ZwCAD 2006...3 Updated from ZwCAD 2005...4 Network license...6 Overview:...6
INTRODUCTION...1. Under Windows 98SE... 2 Under Windows ME... 6 Under Windows Under Windows XP...10
CONTENTS INTRODUCTION...1 I. Install the USB-IrDA Adaptor driver... 2 Under Windows 98SE... 2 Under Windows ME... 6 Under Windows 2000... 9 Under Windows XP...10 II. Make sure the USB-IrDA Adaptor installed
Product Warranty Stipulation The warranty on this product is limited to usage in your state.
Introduction Welcome to Hitachi Software StarBoard Software 6.1. StarBoard is a large-screen monitor for PCs and visual equipment, that also serves as an interactive whiteboard which can be written on
Programming Manual KX-TVA50 KX-TVA200. Voice Processing System. Model No.
Programming Manual Voice Processing System KX-TVA50 KX-TVA200 Model No. Thank you for purchasing a Panasonic Voice Processing System. Please read this manual carefully before using this product and save
(1) DirectCD. Software Operating Instructions MVC-CD200/CD Sony Corporation
3-067-952-12(1) DirectCD Software Operating Instructions MVC-CD200/CD300 2001 Sony Corporation Notice for users Program Copyright 1999 Adaptec, Inc. All rights reserved./ Documentation 2001 Sony Corporation
Engineering Tool for PC SDWP001 Operating Manual
Inverter HF-520/HF-X20 Series SF-520 Series Engineering Tool for PC SDWP001 Operating Manual 1 Manual No. DM2308E-1 Table of Contents Safety Symbols and Markings...4 Safety Notes and Instructions...4 Manual
USER MANUAL for USB2.0 to Data Link. USB2.0 Data Link Cable
Introduction USER MANUAL for USB2.0 to Data Link USB2.0 Data Link Cable Congratulations on your purchase of PCLinq2 Hi-Speed USB Bridge Cable! PCLinq2 is your Hi-Speed USB 2.0 solution to peer-to-peer
GraffixPro Studio Getting Started Guide
GraffixPro Studio Getting Started Guide The GraffixPro Studio Software is comprised of a set of linked applications: the Administrator, the Library, and the design software. This guide outlines the procedures
MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide
MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written
Windows Vista / Windows 7 Installation Guide
Laser Printer Series Windows Vista / 7 Installation Guide Before you can use the printer, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista /
Quick Start Guide for the GSP30B Scale SLP-V Lite Scale and PC Label Cataloging & Printing Program Serial #: This software program will work for Globe GSP30B Scales with serial number 100128507 and above.
GuitarPort 2.5 Users You do NOT have to uninstall GuitarPort 2.5 before installing GearBox.
GEARBOX 3 INSTALLATION GUIDE Welcome to the GearBox installation assistance document. This installation process will install the GearBox software, and optionally, device drivers for Line 6 hardware and
XDCAM Browser. Installation Guide Before operating the unit, please read this manual thoroughly and retain it for future reference.
4-261-700-16 (1) XDCAM Browser Installation Guide Before operating the unit, please read this manual thoroughly and retain it for future reference. 2010 Sony Corporation NOTICE TO USERS Documentation 2010,
VCOM. User Manual. User Manual for VCOM Serial Device Driver. (November 2007)
VCOM User Manual User Manual for VCOM Serial Device Driver (November 2007) Table of Contents 1) INTRODUCTION... 3 1.1) System Requirements... 3 1.2) Software Installation... 3 1.3) System Startup... 5
Contents. Notice. System Requirements. User Notice. Copyright. Software installation. FAT32 Format Utility. One Button File Backup.
Contents Notice System Requirements User Notice Copyright Software installation FAT32 Format Utility One Button File Backup Quick Launch Quick File Backup File Backup File Backup File Restore Erase File
DISC TITLE PRINTER for CW-100 Ver.4.10
DISC TITLE PRINTER for CW-100 Ver.4.10 E For Windows User s Guide We recommend that you print on a disc* before you record anything on it. Printing on a disc that already has data recorded on it can cause
Install Manual. P2 Software ENGLISH M0509AT5091 -FJ VQT2G26-4
Install Manual P2 Software M0509AT5091 -FJ ENGLISH VQT2G26-4 Contents Operating Precautions When Using Windows 1. Before Installing................................................... 3 2. Precautions in
User's Manual (detailed) Network Guide
Projector CP-A220N/CP-A300N User's Manual (detailed) Network Guide (Type nos. CP-A220N, CP-A220NM, CP-A300N, CP-A300NM) Thank you for purchasing this product. This manual is intended to explain only the
App for a Smartphone or Tablet Terminal EXILIM Remote 3.0
App for a Smartphone or Tablet Terminal EXILIM Remote 3.0 User s Guide EN This manual uses a typical CASIO camera and smartphone for explanations. Certain details (display contents, etc.) may differ on
PCLinq2 (PL-2501) Hi-Speed USB Bridge Cable End-User s Manual Guide
Introduction For Windows 98/ME/2000/XP PCLinq_PL2501_Manual_v02 Version 0.2 Congratulations on your purchase of PCLinq2 Hi-Speed USB Bridge Cable! PCLnq2 is your Hi-Speed USB 2.0 solution to peer-to-peer
Operating Instructions
Operating Instructions Before Using This Machine How to Use Converting into the Image Data Printer Driver Troubleshooting Read this manual carefully before you use this product and keep it handy for future
Free. User Guide. Free. Laplink Software, Inc. User Guide MN-PCMFREE-EN-08 (REV. 2/2013)
1 Free Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com Laplink Software, Inc. 600 108th Ave. NE, Suite 610 Bellevue, WA
SANYO Software Pack 9.1 For Digital Movie Camera INSTRUCTION MANUAL
SANYO Software Pack 9.1 For Digital Movie Camera INSTRUCTION MANUAL Please read these instructions carefully before using. Be sure to keep this manual for later reference. ATTENTION Regarding permission
Table of Contents.
Table of Contents 1. Items Included with the BioAxxis ThumbLock Audit Trail Software: 2 2. IMPORTANT NOTE:... 2 3. Supported Operating Systems:... 3 Section 1 Installing the BioAxxis ThumbLock AT Software...
User Guide. PCmover Professional for Windows XP. Laplink Software, Inc. User Guide MN-PCMPRO-XP-EN-08 (REV. 2014/07/08)
1 PCmover Professional The Only Software that Moves Programs, Files, and Settings to a New PC! Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com
Professional. User Guide. Professional. Laplink Software, Inc. User Guide MN-PCMPRO-EN-08 (REV. 2014/04/10)
1 The Only Software that Moves Programs, Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com Laplink Software, Inc. 600 108th
To complete this activity, you will need the following files:
CHAPTER 1 Windows XP More Skills 12 Move Data Between Windows You can open several application windows at the same time; they do not need to be files created by the same program. Having more than one window
DS800 Development Suite Quick Start Guide for the FloBoss 107
Form A6267 Part Number D301597X012 January 2009 DS800 Development Suite Quick Start Guide for the FloBoss 107 Version 1.0 Remote Automation Solutions Revision Tracking Sheet January 2009 This manual may
Copyright Autodesk, Inc.
Customer and Administration Building, Ditzingen, Germany - Design by Barkow Leibinger Architects Copyright 2003-2008 Autodesk, Inc. Table of Contents 1 Introduction... 3 What is Facility Manager?... 3
Home. User Guide. Home. Laplink Software, Inc. User Guide MN-PCMHOME-EN-08 (REV. 1/15/2014)
1 Home Laplink Software, Inc. Customer Service/Technical Support: Web: http://www.laplink.com/contact E-mail: CustomerService@laplink.com Laplink Software, Inc. 600 108th Ave. NE, Suite 610 Bellevue, WA
Operating Instructions
Operating Instructions (For User Setup) Digital Colour Imaging Systems Model No. DP-C406 / C306 / C266 Table of Contents Installation Overview General Installation Overview...2 Installation Installing
Windows Vista /Windows 7 Installation Guide
Windows Vista / 7 Installation Guide Before you can use the machine, you must set up the hardware and install the driver. Please read the Quick Setup Guide and this Windows Vista / 7 Installation Guide
Informatic, Smart Link. Version 3.x POCKET CONTEXT PRO. Multilingual Dictionary for Pocket PC and Pocket PC User's Guide
Informatic, Smart Link Version 3.x POCKET CONTEXT PRO Multilingual Dictionary for Pocket PC and Pocket PC 2002 2002 User's Guide Copyright Notice Copyright 1997-2002 Informatic, Russia and Smart Link Corp.
P3PC ENZ0. Troubleshooting. (installation)
P3PC-3702-01ENZ0 Troubleshooting (installation) Introduction Thank you for purchasing the color image scanner ScanSnap S1500/S1500M/S1300i/S1300/ S1100 (hereinafter referred to as "the ScanSnap"). This
Welcome In this chapter
1 Welcome In this chapter Welcome to ProWORX NxT 2.10 2 Installing ProWORX NxT 3 Starting ProWORX NxT 5 Authorizing ProWORX NxT 8 Customer support 11 ProWORX NxT User s Guide Welcome to ProWORX NxT 2.10
PlexService 2.5 Installation Guide
PlexService 2.5 Installation Guide Copyright 2000-2003 K-Plex Inc. All rights reserved Page 1 Table of Contents 1 Introduction... 3 2 System Requirements... 4 2.1 Hardware... 4 2.2 Software... 4 3 Installation...
Quick Install Guide. Wireless-G Network PCI Adapter. WLP54G 3a
Quick Install Guide Wireless-G Network PCI Adapter WLP54G 3a TABLE OF CONTENTS 1: INTRODUCTION...1 PACKAGING CONTENT...1 2: DRIVERS & UTILITY INSTALLATION...2 3: UNPLUG PCI ADAPTER FROM THE SYSTEM...11
Projector Wired LAN. Version Keep this manual in a safe place future reference.
Projector Wired LAN Version 1.04 Keep this manual in a safe place future reference. PJLink trademark and logo are trademarks applied for registration or are already registered in Japan, the United States
Operating Instructions
Operating Instructions Software (Network Configuration and ) For Digital Imaging Systems Opening Configuration/ System Requirements General Description Before using this software, please carefully read
Programming Manual KX-TVA50 KX-TVA200. Voice Processing System. Model
Voice Processing System Programming Manual Model KX-TVA50 KX-TVA200 Thank you for purchasing a Panasonic Voice Processing System. Please read this manual carefully before using this product and save this
DATA PROJECTOR XJ-H1650/XJ-H1750 XJ-ST145/XJ-ST155
DATA PROJECTOR XJ-H1650/XJ-H1750 XJ-ST145/XJ-ST155 E Data Projector Wireless Function Guide Be sure to read the precautions in the Setup Guide that comes with the Data Projector. Be sure to keep all user
Magnetek Material Handling IMPULSE LINK 4.1 Basic Instruction Manual
Magnetek Material Handling IMPULSE LINK 4.1 Basic Instruction Manual March 2013 Part Number: 140-10350 R6 Copyright 2013 Magnetek Material Handling 2013 MAGNETEK MATERIAL HANDLING All rights reserved.
DATA PROJECTOR XJ-H1650/XJ-H1750/XJ-H2650 XJ-ST145/XJ-ST155
DATA PROJECTOR XJ-H1650/XJ-H1750/XJ-H2650 XJ-ST145/XJ-ST155 E Data Projector Wireless Function Guide Be sure to read the precautions in the Quick Start Guide that comes with the Data Projector. Be sure
Goodwill Accounting 6
Goodwill Accounting 6 (Freeware) INDEX 1. Introduction 2. Product Information 3. Installation i. Contents ii. iii. Requirements Installation 4. Installation Guide i. Using Goodwill ii. iii. iv. Creating
Cover. MATWorX Installation Guide NWA ISSUE 2.1
Cover MATWorX Installation Guide NWA-008862-001 ISSUE 2.1 LIABILITY DISCLAIMER NEC Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC
Install Manual. P2 Software ENGLISH
Install Manual P2 Software M0509KT7033 -PS ENGLISH VQT2G25-6 (E) Contents Operating Precautions............................................ 2 When Using Windows............................................
EXPRESS. Users Guide. Version 3.5
EXPRESS Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information... 7
Physical Activity Analysis Software PAAS Personal Operation Manual Suzuken Company Limited JAPAN
Physical Activity Analysis Software PAAS Personal Operation Manual Suzuken Company Limited JAPAN 1 Index Request to the Users 1 System Requirement 1 Install The Software 2 Uninstall The Software 7 Quick
To complete this project, you will need the following folder:
= CHAPTER 1 Windows 7 More Skills 12 Use Libraries to Organize Files A library is a collection of files and folders stored in different locations on your computer that can be viewed as a single folder.
REVISIONS * The manual number is given on the bottom left of the back cover.
REVISIONS * The manual number is given on the bottom left of the back cover. Print Date * Manual Number Revision Apr., 2002 SH (NA) -080270-A First edition Jun., 2002 SH (NA) -080270-B Correction Section
Quick Reference Guide Model No. KX-NCS8100
IP Softphone Software Quick Reference Guide Model No. KX-NCS8100 Thank you for purchasing the Panasonic IP Softphone Software, KX-NCS8100. Please read this manual before using this product and save for
Data setting software MEXE02
HM-40143 Data setting software MEXE02 OPERATING MANUAL Before Use Thank you for purchasing an Oriental Motor product. This operating manual describes product handling procedures and safety precautions.
PageScope Box Operator Ver. 3.2 User s Guide
PageScope Box Operator Ver. 3.2 User s Guide Box Operator Contents 1 Introduction 1.1 System requirements...1-1 1.2 Restrictions...1-1 2 Installing Box Operator 2.1 Installation procedure...2-1 To install
DS800 Development Suite Quick Start Guide for the ROC800-Series
Form A6274 Part Number D301598X012 March 2009 DS800 Development Suite Quick Start Guide for the ROC800-Series Remote Automation Solutions Revision Tracking Sheet March 2009 This manual may be revised periodically
Roland Software Package (RSP-009) SOFTWARE GUIDE
Roland Software Package (RSP-009) SOFTWARE GUIDE Thank you very much for purchasing this product. To ensure correct and safe usage with a full understanding of this product's performance, please be sure
TOSHIBA Label Printer. BCP Setting Tool Operation Manual
TOSHIBA Label Printer BCP Setting Tool Operation Manual 3rdEdition: February 23, 2017 TABLE OF CONTENTS 1. INTRODUCTION 3 SUPPORTED PRINTERS... 3 SOFTWARE LICENSE AGREEMENT... 3 FEATURES... 4 OUTLINE OF
MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide
MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written
A Guide to Installing OLI Software
A Guide to Installing OLI Software OLI Systems delivers a comprehensive suite of tools designed to help you analyze complex aqueous and multi-solvent electrolyte solution chemistry, thermo-physical properties,
Operating Instructions
Operating Instructions For Digital Camera PC Connection QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license. Connection with the PC Offers
User Guide 701P Wide Format Solution Wide Format Scan Service
User Guide 701P44865 6204 Wide Format Solution Wide Format Scan Service Xerox Corporation Global Knowledge & Language Services 800 Phillips Road Bldg. 845-17S Webster, NY 14580 Copyright 2006 Xerox Corporation.
Digital Storage Oscilloscope Communication&Control Software User Manual and Installation Instructions
Document No. SYSC-0-100108 January 2010 Digital Storage Oscilloscope Communication&Control Software User Manual and Installation Instructions Page 1 of 24 Copyright Information 1. Uni-Trend Technology
Splicer Data Explorer. User manual. Please read entire manual prior to usage.
Splicer Data Explorer User manual Please read entire manual prior to usage. Issue 3 June 2013 Contents 1. Introduction...- 1-1.1. The fusion splicer Requirements...- 1-1.2. PC Requirements...- 2-2. Setting
KV-SS090. Operating Instructions. Instant Scanning Software. Model No.
Operating Instructions Instant Scanning Software Model No. KV-SS090 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for
U-20 Data Collection Software (U-20 for Win-XP/E) Operation Manual
July, 2006 U-20 Data Collection Software (U-20 for Win-XP/E) Operation Manual CODE:GZ9100230793B 2000 2006 HORIBA, Ltd. As this software is only made for sample, all problems regarding this software is
User s Guide. Creative Desktop Wireless 9000 Pro
User s Guide Creative Desktop Wireless 9000 Pro Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this
HP Travel Phone User s Guide
HP Travel Phone User s Guide Version 1.0 Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products
CellSync Manager. User Manual F8V7D006-SS F8V7D008-SS. Get online and synchronize anywhere. Web Access. Phone Book Manager
CellSync Manager Get online and synchronize anywhere Web Access Phone Book Manager User Manual F8V7D006-SS F8V7D008-SS TABLE OF CONTENTS Introduction...2 Interactive Phone Menu...3 LG 5350 CellSync Software
M-crew for HAR-D1000
4-237-495-11(2) M-crew for HAR-D1000 Operating Instructions 2001 Sony Corporation Duplication of any or all of the contents of this software and instruction manual or lending of this software to third
1. 1. Executing the Integrated Simulation (Starting up up the CX-Programmer) Saving a location and restarting it it on on the CX-Programmer
Cat.No. V408-E1-02 Contents 1. 1. Executing (Starting up up the CX-Programmer) 2. 2. Opening a Project and Starting up up 3. 3. Operation Check 4. 4. Resizing/ Top/ a Location Resizing a Screen Top a location
Software Package Installation Instructions
Introduction Novar provides an automatic installation package that involves reading simple, easy-to-follow instructions on each screen and clicking on the appropriate options. This document provides detailed