CA Disk Backup and Restore CA RS 1609 Service List

Transcription

1 CA Disk Backup and Restore CA RS 1609 Service List Release Service Description Type 12.5 RO90201 ARCHIVE U0100 ABEND DUE TO INCORRECT RCF KEYS PTF RO90374 DINXUFEX EXIT DOES NOT WORK WITH BACKUPCC PTF RO91146 ADD THREE NEW JCL MEMBERS FOR HSM CONVERSION TO CA DISK PTF The CA RS 1609 service count for this release is 3

2 CA Disk Backup and Restore 2 CA RS 1609 Service List for CCUWC50 FMID Service Description Type CCUWC50 RO90201 ARCHIVE U0100 ABEND DUE TO INCORRECT RCF KEYS PTF RO90374 DINXUFEX EXIT DOES NOT WORK WITH BACKUPCC PTF RO91146 ADD THREE NEW JCL MEMBERS FOR HSM CONVERSION TO CA DISK PTF The CA RS 1609 service count for this FMID is 3

3 CA Disk Backup and Restore CA RS PTF RO90201 Release Service 12.5 RO90201 RO90201 M.C.S. ENTRIES = ++PTF (RO90201) ARCHIVE U0100 ABEND DUE TO INCORRECT RCF KEYS PROBLEM DESCRIPTION: 1. During an Archive run ADSDM061 generates message 9999 followed by a U0100 ABEND. 2. Changed Datacom DSOP from 1 to 4 as recommended by Datacom support. Option 1 is outdated and should be replaced by 4. SYMPTOMS: 1. U0100 abend and the following messages are issued: PET202I USER ABEND(U0100) AT PSW(078D A7D54). PET206I ABEND OCCURRED AT PGM(ADSDM061.ADSDM CC) EPI(01/15/10 CCU ADSDC ORIGINATING FROM ADSDS077 ACCESSING TABLE RACFENCD USING SI ADSDM LOOP GENERATING RACFENCD RECORD ADSDM061 CONTACT CA DISK TECHNICAL SUPPORT 2. Longer run time for Online Reorg IMPACT: 1. The job abends and archive/backup cannot continue. 2. Longer run time for Online Reorg CIRCUMVENTION: PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release 12.5 Related Problem: DISKOS Copyright (C) 2016 CA. All rights reserved. R00207-CUW125-SP2 DESC(ARCHIVE U0100 ABEND DUE TO INCORRECT RCF KEYS). ++VER (Z038) FMID (CCUWC50) SUP ( TR90201 ) ++HOLD (RO90201) SYSTEM FMID(CCUWC50) REASON (ACTION ) DATE (16208) COMMENT ( CA Disk Backup and Restore Release 12.5 SEQUENCE Before Restart PURPOSE Reformat RCF key USERS Users using CA Disk Datacom FDB AFFECTED KNOWLEDGE CA Disk administration REQUIRED ACCESS CA Disk libraries REQUIRED CA Datacom AD libraries CA Disk FDB ************************** * STEPS TO PERFORM * ************************** 1. You will need to perform an update on the RCF key in the CXX entry of each CA Disk Datacom FDB that you use. 2. New CCUWPROC member DBCBUPDT has been added by this PTF. If you execute from a PROCLIB other than your CA Disk Target CCUWPROC, then the new DBCBUPDT PROC needs to be to copied to your production CA Disk PROCLIB. 3. To perform the FDB update, run the DBCBUPDT JCL which was added to the CCUWJCL library by this change. 4. You will have to run it for each CA Disk FILES DBID you use. 5. To verify the RCF key change you can run the following JCL:

4 Release Service CA Disk Backup and Restore CA RS PTF RO90201 //J09DBCXX JOB (1),'CA DISK',CLASS=A,MSGCLASS=X,NOTIFY=&SYSUID //****************************************************************** //* * //* THIS JOB CAN BE USED TO PRINT THE CXX INFORMATION * //* * //* GENERALLY THIS WILL BE USED AT SUPPORT'S REQUEST. * //* * //****************************************************************** //PRINT EXEC PGM=DBUTLTY,REGION=2M //STEPLIB DD DISP=SHR,DSN=cai.adrr.CUSLIB // DD DISP=SHR,DSN=cai.adrr.CAAXLOAD //SYSPRINT DD SYSOUT=* //SNAPER DD SYSOUT=* //SYSIN DD * REPORT AREA=CXX,DBID=xxx <= CA Disk FILES DBID number // 6. To locate the change, do a FIND of "RACFENCD" and then look for "RCFK1" and check the LENGTH column where the value should be 49. If still 47 the change has not been done. Please redo the procedure. Here is the extract of the report. TABLE SQLNAME - RACFENCD_xxx... KEY - NAME ID LENGTH MASTER NATIVE UNIQUE DIRECT KEY INC RCFK YES YES NO NO YES 7. Note that any new FDB will be correctly allocated and will not require this update process. It is a one time process only. ).

5 CA Disk Backup and Restore CA RS PTF RO90374 Release Service 12.5 RO90374 RO90374 M.C.S. ENTRIES = ++PTF (RO90374) DINXUFEX EXIT DOES NOT WORK WITH BACKUPCC PROBLEM DESCRIPTION: DINXUFEX exit is used to update the DSNINDEX user field but it does not work for BACKUPCC. SYMPTOMS: IMPACT: BACKUPCC does not invoke DINXUFEX user exit CIRCUMVENTION: PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release 12.5 Related Problem: DISKOS Copyright (C) 2016 CA. All rights reserved. R00209-CUW125-SP2 DESC(DINXUFEX EXIT DOES NOT WORK WITH BACKUPCC). ++VER (Z038) FMID (CCUWC50) SUP ( RO20246 RO48086 TR90374 )

6 CA Disk Backup and Restore CA RS PTF RO91146 Release Service 12.5 RO91146 RO91146 M.C.S. ENTRIES = ++PTF (RO91146) ADD THREE NEW JCL MEMBERS FOR HSM CONVERSION TO CA DISK PROBLEM DESCRIPTION: Elapsed processing time may be very high during conversion of DFSMShsm to CA Disk. The new CCUWJCL library members CNVTMIGn can reduce the conversion time by splitting the MCDS records into separate data sets and running multiple HSMGEN1 jobs concurrently. SYMPTOMS: Long running conversion jobs. IMPACT: Lengthy conversion period. CIRCUMVENTION: PRODUCT(S) AFFECTED: CA Disk Backup and Restore Release 12.5 Related Problem: DISKOS Copyright (C) 2016 CA. All rights reserved. R00212-CUW125-SP2 DESC(ADD THREE NEW JCL MEMBERS FOR HSM CONVERSION TO CA DISK). ++VER (Z038) FMID (CCUWC50) SUP ( TR91146 ) ++HOLD (RO91146) SYSTEM FMID(CCUWC50) REASON (DOC ) DATE (16235) COMMENT ( CA Disk Backup and Restore Release *************************** * PUBLICATION * *************************** CA Disk Installation Guide - Configuring Your Product Replace the following section 9. Review the HSMGEN1 member. This job sorts the MCDS records, created in Step 3, into VOLSER and file sequence number. This job creates the DFSMShsm and CA Disk commands in VOLSER sequence. Messages are printed indicating the DFSMShsm VOLSER and the space to recover the data sets on the volume. The DD statement JCL4ML1 points to the model JCL used for data sets stored on ML1 and JCL4ML2 to the model for ML2. Update these models to suit the requirements of your installation (members HSMCONM1 and HSMCONM2 of the INSTALL library). A SYSIN command controls the number of DFSMShsm volumes that are selected for processing. Decrease processing time by splitting the MCDS records into separate data sets and running multiple HSMGEN1 jobs concurrently. Multiple jobs mean more space that is used and more ML1 and ML2 units that are used during processing. Two methods exist to run multiple jobs: a. Create separate jobs that are based on the full VOLSER list and then cut it into pieces. We executed two jobs in parallel. Each job creates a number of records (15000 in the sample) that are treated and submitted with the next job. The samples are named HSMMIGnn. You can find them in our CCUWJCL library. Create parallel JCLs which manage the VOLSER one by one. Each new submit removes the first VOLSER on the list. Each JCL submitted once automatically starts the other. Only HSMCOV01 creates the complete VOLSER list. Then a loop starts with HSMCOV02 and HSMCOV03. The loop continues until there are no more tapes to convert. To 9. Review the HSMGEN1 member. This job sorts the MCDS records, created in Step 3, into VOLSER and file sequence number. Then it creates the DFSMShsm and CA Disk commands in

7 Release Service CA Disk Backup and Restore CA RS PTF RO91146 VOLSER sequence. Messages are printed indicating the DFSMShsm VOLSER and the space required to recover the data sets on the volume. The DD statement JCL4ML1 points to the model JCL used for data sets stored on ML1 and JCL4ML2 to the model for ML2. Update these models (members HSMCONM1 and HSMCONM2 of the CCUWJCL library) to suit the requirements of your installation. A SYSIN command controls the number of DFSMShsm volumes that are selected for processing. To achieve a faster conversion, you can decrease processing time by splitting the MCDS records into separate data sets and running multiple HSMGEN1 jobs concurrently. Multiple jobs mean more space that is used and more ML1 and ML2 units that are used during processing. The process creates separate jobs that split the full VOLSER list among multiple jobs that can run concurrently. Job CNVTMIG1 creates sorted output (Hlq.OUTPUT.SORTM) from the DFSMShsm MCDS which will be used as input for the next jobs CNVTMIG2 and CNVTMIG3, which will run in parallel. The CNVTMIG2 job will only select the first records and leave the remainder in the sorted output file (Hlq.OUTPUT.SORTM). The last step of CNVTMIG2 automatically submits the CNVTMIG3 job to continue selecting the next records of this data set. Each selection reduces the number of records in Hlq.OUTPUT.SORTM. CNVTMIG3 processes the next DFSMShsm MCDS records and leaves the rest in the sorted output file (Hlq.OUTPUT.SORTM). The last step of CNVTMIG3 automatically submits the CNVTMIG3 job to continue converting the next records of this data set. The samples are in the members named CNVTMIGn in the CCUWJCL library. ).