supernode Electronic controller for humidification Technical Leaflet Integrated Control Solutions & Energy Savings

Size: px
Start display at page:

Download "supernode Electronic controller for humidification Technical Leaflet Integrated Control Solutions & Energy Savings"

Transcription

1 supernode Electronic controller for humidification Technical Leaflet Integrated Control Solutions & Energy Savings

2 Symbol: Warning: The symbol in the plastic cover of the control means to refer to this technical leaflet during the electrical installation.

3 1. INTRODUCTION The gateway can connect up to a maximum of 20 devices (humisteam X-plus, heatersteam, gasteam), allowing up to 150 variables (50 analogue, 50 integer, 50 digital) for each connected device to be managed by the external supervisor. Seven pre-set templates allow the variables exchanged between the humidifier and the gateway to be addressed automatically, depending on the device selected during programming: simply specify the type of device and the number of devices connected. The built-in pgd on the Supernode or an external pgd1 terminal can be used for programming. Supernode or Kit* part number: Description Supernode for humidification + FLSTDmUGWS (controller only) Kit Supernode HUM BACNET MSTP SNS0000EM0 +SNSCON00M0 +PCO10B0BA0 +CVSTDUMOR0 +FLSTDMUGWS Kit Supernode HUM BACNET ETHERNET WEB SNS0000EM0 +SNSCON00M0 +PCO10B0WB0 +FLSTDMUGWS Kit Supernode HUM MODBUS SNS0000EM0 +SNSCON00M0 +PCOS FLSTDMUGWS CAREL Code SNU0000EM0 A-KSNU0CLBA11 A-KSNU0CLWB11 A-KSNU0CL4811 * Note: The Supernode Communication kits contain the controller, the connectors, and the appropriate communications card. The kit also contains a USB-Flash drive with the product manuals, technical leaflets, device guides, and the Supernode variable to unit address mapping list. On the external supervisor side, the protocol can be selected by choosing the corresponding optional serial card. The possible options are: Item P/N Description 1 Modbus /CAREL RS485 PCOS Opto-isolated RS485 serial 3 BACnet Ethernet PCO10B0WB0 Ethernet 8 MB serial 4 BACnet RS485 PCO10B0BA0 BACnet MS/TP 485 serial tab. 1a The module is DIN rail mounted, with 24 Vac power supply (+10%, -15%). Supernode for humidification allows the possibility to select UR, UEX, and UG humidifiers, including a combination of different models. For the address settings of the variables on the supervisor side, refer to the dynamic table (included on the USB drive) the FLSTDmUGWS_Supervisory_List_dinamic_table_supernode_for_ humidification Excel file. The application on Supernode also features the following options: Edit the humidifier model, if necessary add/re-address the pre-set variables. Manage a generic device using the Universal model, which can be freely edited according to customer requirements U Supernode for humidification

4 2. INSTALLATION Install and mount the controller in a location that is appropriate for an industrial PLC. Mechanical fastening The Supernode is installed on a DIN rail. To fasten the unit to the DIN rail, press it lightly against the rail. The rear tabs will click into place, locking the unit to the rail. Removing the unit is just as simple, using a screwdriver through the release slot to lever and lift the tabs. The tabs are kept in the locked position by springs. Below is a description of the connectors used for connection and installation of Supernode: 2.1 Connectors 3 4 Tx/Rx J5 J6 TLAN J7 Tx/Rx GNX J8 ISOLATED Y1 Y2 PWM 0/10V J9 NO2 C2 J10 J4 serial card 2 C622P028/R2 input voltage: max. power: 24 V (+10/-15%); 50/60 Hz 8 VA / 6 W 48 V (36Vmin 72 Vmax) serial card 1 G J1 G0 SYNC B1 B2 B3 B4 J2 B5 B6 +5Vref +VDC ID1 C1 J3 NC1 NO Key 1 power connector (G+,G0) 24 Vac or 36 V min...72 V max 2 SPDT relay digital output 3 plan network connector 4 optically-isolated Field-Bus serial connector 5 connector for BMS serial cards +08U Supernode for humidification

5 2.2 Connection diagram Note: See each specific product/component technical leaflet for specific wiring connections. + - RS485 CAREL master RS485 CAREL slave serial card device device 2 serial card device n (n<=20) G G0 status BACnet MS/TP RS485 P1 P2 P3 GNX + RS485 PCOS RS485 serial card PCO1000BA0 BACnet MSTP RS485 interface PCO1000WB0 -Ethernet /BACnet interface card 5 +08U Supernode for humidification

6 3. PROGRAMMING AND CONFIGURING THE DEVICES Navigation of the Display Masks Use the Alarm, Program, Esc, Down/Up, and Enter keys. Note: depending on the model of Supernode, the buttons may differ as indicated here below. In typcial control mode, the button icons are displayed on the masks in the controller software. PRG ESC clear Alarm Program Escape Down Up Enter 3.1 Programming the Supernode Use Password: 1234 for entering the Service or Manufacturer menu. 1. Set the number of devices connected to the gateway: Values available: from 1 to 20 devices. Menu path: Service Service Settings Device settings 2. Set the address and type of device : Models available: heatersteam, humisteam X-plus, gasteam, generic device Menu path: Service Service Settings Device settings The address setting and type of model must be selected for each device connected to the gateway. +08U Supernode for humidification

7 3. Set the BMS1 and BMS2 serial port for reading by external supervisor: Address, protocol and baud rate setting. Menu path: Service BMS Config. 4. Set the Carel master protocol for communication between Supernode and devices: Supernode communication protocol setting with devices: baud rate (Retry n. and ORT can be left as default) Note: the baud rate to be set always corresponds to the slowest device connected (for heatersteam the baud rate is 9600). Menu path: Manufacturer Factory Settings 5. Edit the model: The selected model can be edited Menu path: Manufacturer Devices config Alarm settings: Enable alarms in the event of supervisor offline Menu path: Manufacturer Factory Settings 7 +08U Supernode for humidification

8 3.2 Configuring the Communications Card Each type of protocol card has different tools and procedures needed to setup the card. In general, the pconet and pcoweb cards need; device instance (BACnet ID), Baud Rate, The MS/TP station address (MAC Address), and Max Master and Max frames. These settings can be configured in 2 ways; Using BACset, or by directly in the Supernode controller screens/masks; Using BACset on a computer and USB/485 Converter (see guides on using MS-TP startup and pconet/web cards). Using the pgd display on the Supernode controller (see guide on BACnet BIOS menu). On the PGD; hold alarm & enter: other information PCOWEB/NET CONFIG PCONET DHCP:--- IP ADDRESS: Configuring the humidifier unit Please reference each specific humidifier product manual for supervisory control setup. For reading of the humidifier, most units will not need any settings changed. For both reading/writing (control the humidifier by BMS), each unit will need some settings changed. In general, each humidifier will have a setting for the control type and supervisory system: Type of control; on/off, slave-proportional, stand-alone %RH control, etc. Enable the humidifier to be controlled by supervisory system (on/off enable, and control regulation by BMS). +08U Supernode for humidification

9 4. COMMUNICATING TO THE HUMIDIFIER(S) The Supernode for humidification allows the possibility to select UR, UEX, and UG humidifiers, including a combination of different models. For the address settings of the variables on the supervisor side, refer to the dynamic table (included in the USB Drive) FLSTDmUGWS_Supervisory_List_dinamic_table_supernode_for_humidification Excel file. The table includes the variable list table for heatersteam, humisteamx-plug, gasteam, and a generic device on separate tabs. Note: When more than (1) device is in the system, use the appropriate device tab, and device number at the top to generate the correct variable addresses. This table can be used also for generating the variable for more than 1 device (device 2-20) U Supernode for humidification

10 Note: +08U Supernode for humidification

11 Note: U Supernode for humidification

12 CAREL INDUSTRIES HQs Via dell Industria, Brugine - Padova (Italy) Tel. (+39) Fax (+39) carel@carel.com - CAREL USA 385 South Oak Street Manheim, PA Tel. (717) Fax (717) carel_usa@carel.com - Agenzia / Agency: +08U Supernode for humidification

EC-FAN GATEWAY (ECGK-CT0) Operating Manual

EC-FAN GATEWAY (ECGK-CT0) Operating Manual EC-FAN GATEWAY (ECGK-CT0) Operating Manual The engineer s choice TABLE OF CONTENT 1. INTRODUCTION 1.1 Installation 1.2 Power Supply 1.3 Installation warnings 2. TECHNICAL SPECIFICATIONS 2.1 Scope of delivery

More information

TECHNICAL SPECIFICATIONS...

TECHNICAL SPECIFICATIONS... 1 Contents 2 INTRODUCTION... 2 2.1 Installation... 2 2.2 Power Supply... 2 2.3 Installation warnings... 2 3 TECHNICAL SPECIFICATIONS... 3 3.1 Scope of delivery... 3 3.2 Mechanical specifictions... 3 3.3

More information

Protocollo Modbus sui controlli pco Modbus protocol for pco controllers

Protocollo Modbus sui controlli pco Modbus protocol for pco controllers Protocollo Modbus sui controlli pco Modbus protocol for pco controllers Manuale d uso User manual I n t e g r a t e d C o n t r o l S o l u t i o n s & E n e r g y S a v i n g s 1 INTRODUCTION The Modbus

More information

pco5 Overview February 2010 Air Conditioning Business Unit pco5 Overview slide n. 1

pco5 Overview February 2010 Air Conditioning Business Unit pco5 Overview slide n. 1 pco5 Overview February 010 Air Conditioning Business Unit pco5 Overview slide n. 1 pco5 pco5 Overview The most advanced CAREL programmable controller. Designed for multiple applications in the fields of

More information

programmable controllers pco Sistema: pco pco 5 + Programmable controller for HVAC/R applications carel.com

programmable controllers pco Sistema: pco pco 5 + Programmable controller for HVAC/R applications carel.com programmable controllers pco Sistema: pco pco 5 + Programmable controller for HVAC/R applications carel.com The 5 pluses of the pco5+ pco5+: one response to the multiple current and future demands of the

More information

pco sistema programmable controllers Technology & Evolution

pco sistema programmable controllers Technology & Evolution pco sistema programmable controllers Technology & Evolution pco sistema programmable controllers The pco Sistema is the result of Carel s years of experience in the design and manufacture of programmable

More information

TECHNICAL REFERENCE MANUAL FOR CAREL CONTROLLERS

TECHNICAL REFERENCE MANUAL FOR CAREL CONTROLLERS TECHNICAL REFERENCE MANUAL FOR CONTROLLERS IOM-02 April 2017 Contents Page FUNCTIONAL LAYOUT... 1 pco5+ DESIGN... 2 SERIAL PORTS... 3 MOUNTING, DIMENSIONS & INSTALLATION... 4 Installation... 5 Environmental

More information

Solutions for showcases and cold rooms

Solutions for showcases and cold rooms Solutions for showcases and cold rooms T e c h n o l o g y & E v o l u t i o n Solutions for showcases and cold rooms Refrigeration utilities are a fundamental part of the refrigeration system, and as

More information

Product data sheet accessories control and regulation Accessories AIRWIN

Product data sheet accessories control and regulation Accessories AIRWIN Product data sheet accessories control and regulation BO-CT1 Continuous controller Item no. 6100101 Control of humidification performance BO-CT1 Option board 2 binary inputs Item no. 002212 Setpoint switching,

More information

boss The complete range for mobile-ready local supervision

boss The complete range for mobile-ready local supervision boss The complete range for mobile-ready local supervision Supervisors for medium and large sites with built-in Wi-Fi, accessible from all mobile devices range Completely browsable from mobile devices,

More information

Efficient. Innovative. Sustainable.

Efficient. Innovative. Sustainable. Efficient. Innovative. Sustainable. Controlesta RCO System Description On-line, at each time, at each place 1 CONTROLESTA RCO System Description 1. System architecture 2.1 Master Controller 2.2 Network

More information

BACnet MS/TP Interface User s Guide

BACnet MS/TP Interface User s Guide PoolPak MPK with CommandPak Control System CPCS BACnet MS/TP Interface User s Guide DOCUMENT #: SVW07-BACNET-MSTP-20171020 UPDATED: OCTOBER 2017 INTRODUCTION PoolPak dehumidifiers equipped with an CommandPak

More information

MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE

MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 05/2009 MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION! FOLLOW NATIONAL, STATE AND LOCAL CODES.

More information

Products no longer available

Products no longer available Technical data sheet BKS24-.. MONICO-Controller BKS24-.. Forms an efficient fire protection system together with the motorisation sets BF(G)24MP Controller with application software for control and monitoring

More information

Monitoring and Telemaintenance Web-Based System

Monitoring and Telemaintenance Web-Based System Monitoring and Telemaintenance Web-Based System Technology & Evolution PlantVisor is the Carel web-server based monitoring and telemaintenance system server that features flexibility of use and easy access

More information

INSTALLATION MANUAL. Gateway EKBMSMBA EKBMSBNA

INSTALLATION MANUAL. Gateway EKBMSMBA EKBMSBNA INSTALLATION MANUAL EKBMSMBA EKBMSBNA Serial module BMS print out line alarm alarm 2 rx tx reset µchiller compact EKBMSMBA EKBMSBNA Installation manual READ THIS MANUAL ATTENTIVELY BEFORE STARTING UP THE

More information

256 MB RAM. 256 MB 32 bits RISC Cortex-A8 600MHz SD Card Slot. N/A USB Host. N/A USB Client

256 MB RAM. 256 MB 32 bits RISC Cortex-A8 600MHz SD Card Slot. N/A USB Host. N/A USB Client User Manual V1.0.0 Table of Contents Overview... 1 1.1. Specification... 1 1.2. Dimensions... 2 1.3. Connector pinouts... 3 1.4. Restoring factory default... 3 1.5. LED indicator... 3 1.6. CR1225 battery...

More information

IntesisBox Modbus Server - Honeywell XLS 80

IntesisBox Modbus Server - Honeywell XLS 80 IntesisBox Server - Honeywell XLS 80 Gateway for integration of Honeywell XLS 80 fire panels into (RTU and TCP) enabled control systems. Integrate your Honeywell fire panels into your master device or

More information

Controllers for static or ventilated refrigeration units up to 2HP. Innovative Solutions for Cold Rooms. Technology & Evolution

Controllers for static or ventilated refrigeration units up to 2HP. Innovative Solutions for Cold Rooms. Technology & Evolution Controllers for static or ventilated refrigeration units up to 2HP Innovative Solutions for Cold Rooms Technology & Evolution MasterCella is the new series of controllers for cold rooms that joins the

More information

gridcomm GC1310 Master Light Controller Hardware Installation Guide

gridcomm GC1310 Master Light Controller Hardware Installation Guide gridcomm GC1310 Master Light Controller Hardware Installation Guide GC1310 GC1318 Non LoRA option LoRA option GridComm Pte. Ltd. Page 1 of 16 GC-Net and the gridcomm logo are trademarks of gridcomm Pte

More information

BAS Router BACnet Multi-Network Router

BAS Router BACnet Multi-Network Router BAS Router BACnet Multi-Network Router The BAS Router provides stand-alone routing between BACnet networks such as BACnet/IP, BACnet Ethernet, and BACnet MS/TP thereby allowing the system integrator to

More information

pco sistema... communication Technology & Evolution

pco sistema... communication Technology & Evolution pco sistema... communication Technology & Evolution pco sistema... communication pco sistema is the result of CAREL s years of experience in the design and manufacture of controllers for HVAC/R units.

More information

3.1 Updating Web Package Updating OS... 16

3.1 Updating Web Package Updating OS... 16 User Manual V1.0.0 Table of Contents Chapter1. Overview... 1 1.1. Specification... 1 1.2. Dimensions... 2 1.3. Connector pin designations... 4 1.4. Restoring factory default... 4 1.5. LED indicator...

More information

PoolPak MPK with CommandPak Control System CPCS BACnet /IP User s Guide DOCUMENT #: SVW07-MPKBACNIP

PoolPak MPK with CommandPak Control System CPCS BACnet /IP User s Guide DOCUMENT #: SVW07-MPKBACNIP PoolPak MPK with CommandPak Control System CPCS BACnet /IP User s Guide DOCUMENT #: SVW07-MPKBACNIP-20171020 UPDATED: OCTOBER 2017 INTRODUCTION PoolPak dehumidifiers equipped with an CommandPak Control

More information

NIEx9. Metasys. BAS network automation Supervisory controllers. Network Integration Engine

NIEx9. Metasys. BAS network automation Supervisory controllers. Network Integration Engine Virtual Branch ecatalogue click here Metasys Network Integration Engine Network Integration Engines (s) for 3 rd party integrations enable Internet Protocol (IP) connectivity and Web-based access to Metasys

More information

Gateway BACnet IP/MS-TP slave KNX TP Code: EK-BJ1-TP-IP / EK-BJ1-TP-MSTP

Gateway BACnet IP/MS-TP slave KNX TP Code: EK-BJ1-TP-IP / EK-BJ1-TP-MSTP writing single and multiple -bit registers (Coil and Status) as well as 6-bit registers (Holding and Input). It is also possible to read and write multiple registers containing -bit floating point values

More information

µc sistema the range T e c h n o l o g y & E v o l u t i o n

µc sistema the range T e c h n o l o g y & E v o l u t i o n µc sistema the range T e c h n o l o g y & E v o l u t i o n Multifunction digital controllers for air/water units State of the Art technology for powerful, flexible and reliable controllers µc sistema

More information

IntesisBox Modbus Server - BACnet/IP Client

IntesisBox Modbus Server - BACnet/IP Client IntesisBox Modbus Server - BACnet/IP Client Gateway for integration of devices into Modbus (RTU and TCP) systems. Integrate Daikin VRV Air Conditioners into your Modbus system (SCADA, BMS, PLC ). For this,

More information

Multitouch/BACnet Functional description UMG 604 / UMG 605 / UMG 508 / UMG 511

Multitouch/BACnet Functional description UMG 604 / UMG 605 / UMG 508 / UMG 511 Functional description Multitouch/BACnet UMG 604 / UMG 605 / UMG 508 / UMG 511 Doc no. 2.033.107.0 www.janitza.com BACnet activation UMG 604, Article no.: 52.16.081 BACnet activation UMG 605, Article no.:

More information

Industrial Serial Device Server

Industrial Serial Device Server 1. Quick Start Guide This quick start guide describes how to install and use the Industrial Serial Device Server. Capable of operating at temperature extremes of -10 C to +60 C, this is the Serial Device

More information

Modbus Server SIEMENS Algorex (printer port)

Modbus Server SIEMENS Algorex (printer port) IntesisBox Server SIEMENS (printer port) Gateway for the integration of Siemens fire detection panels into enabled control systems. Monitor your fire panels remoy from your Control Center using any commercial

More information

FCU-4 FAN COIL CONTROLLER

FCU-4 FAN COIL CONTROLLER FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced

More information

IQ4/.../XNC/... Interface

IQ4/.../XNC/... Interface Data Sheet Interface Description The IQ 4 s XNC functionality provides a way of interfacing the Trend system with 3rd party systems. It utilises standard IQ strategy modules, and the Trend Custom Language

More information

CCM-204 MULTI-PURPOSE TEMPERATURE CONTROLLER

CCM-204 MULTI-PURPOSE TEMPERATURE CONTROLLER CCM-204 MULTI-PURPOSE TEMPERATURE CONTROLLER BACnet Enabled C-037 08/12 DESCRIPTION The BACnet enabled CCM-204 Multi-Purpose temperature controller is designed to offer complete control flexibility for

More information

Modbus Server - M-Bus (EN ) Gateway for the integration of M-BUS meters with Modbus RTU and TCP based control systems.

Modbus Server - M-Bus (EN ) Gateway for the integration of M-BUS meters with Modbus RTU and TCP based control systems. IntesisBox Server - M-Bus (EN 13757-3) Gateway for the integration of M-BUS meters with and based control systems. Integrate M-Bus meters into your master device or system (BMS, SCADA, PLC, HMI, TouchPanels

More information

Motortronics VirtualSCADA VS2-MT Communication Gateway VS2-MT User Manual Revision

Motortronics VirtualSCADA VS2-MT Communication Gateway VS2-MT User Manual Revision Motortronics VirtualSCADA VS2-MT Communication Gateway VS2-MT User Manual Revision 1.03.00 Motortronics / Phasetronics 1600 Sunshine Drive Clearwater, Florida 33765 Tel: 727-573-1819 Fax: 727-573-1803

More information

D7000 SERIES MODBUS TCP/IP ETHERNET INTERFACE MODULES

D7000 SERIES MODBUS TCP/IP ETHERNET INTERFACE MODULES 11/17 D7000 SERIES MODBUS TCP/IP ETHERNET INTERFACE MODULES D7000 FEATURES Complete data acquisition systems. Analog and Digital I/O models available. RJ-45 Ethernet 10/100MB interface. Modbus TCP/IP Ethernet

More information

S SENECA. Installation Manual Z-TWS4. Z-PC Line. Web Multifunction Controller Straton / Linux

S SENECA. Installation Manual Z-TWS4. Z-PC Line. Web Multifunction Controller Straton / Linux S SENECA Z-PC Line EN Installation Manual Contents: - General specifications - Technical features - Modbus and CANopen connections - Installation rules - Electrical connections - LEDs signallings - Default

More information

User Manual. cmt-svr Startup Guide

User Manual. cmt-svr Startup Guide User Manual cmt-svr Startup Guide Table of Contents Chapter 1 Overview... 1 1.1 Specification... 1 1.2 Dimensions... 2 1.3 Connector pin designations... 3 1.4 USB host port and SD card slot... 3 1.5 Ethernet

More information

FCU-4 FAN COIL CONTROLLER

FCU-4 FAN COIL CONTROLLER FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced

More information

PEAK TM. PEAK TM controllers. Mid-Market BAS Smart equipment controllers. HVAC/R controllers

PEAK TM. PEAK TM controllers. Mid-Market BAS Smart equipment controllers. HVAC/R controllers Virtual Branch ecatalogue click here controllers HVAC/R controllers The PEAK 18 and PEAK 32 Controllers are configurable controllers that can be switched between MS/TP, Modbus RTU, and N2 Communication

More information

BMS-Ethernet-Gateway COM460IP

BMS-Ethernet-Gateway COM460IP BMS-Ethernet-Gateway TDB501015en / 11.2012 BMS-Ethernet-Gateway BMS-Ethernet-Gateway Device features Modular, expandable gateway between BMS bus and TCP/IP Gateway between BMS bus and Ethernet Range of

More information

WM20. Power analyzer for three-phase systems. Benefits. Description

WM20. Power analyzer for three-phase systems. Benefits. Description WM20 Power analyzer for three-phase systems Description WM20 is a modular power analyzer for single-, two- and three-phase systems. It is made up of a maximum of three components: the main unit that displays

More information

COMTRAXX COM460IP. BMS-Ethernet-Gateway

COMTRAXX COM460IP. BMS-Ethernet-Gateway COMTRAXX COM460IP BMS-Ethernet-Gateway COM460IP_D00023_03_D_XXEN/11.2015 COMTRAXX COM460IP BMS-Ethernet-Gateway COM460IP Device features Modular, expandable gateway between BMS bus and TCP/IP Gateway between

More information

Programmable Set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Programmable Set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2 Type designation Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100

More information

DKG-210 UNIVERSAL INTERNET GATEWAY UNIT

DKG-210 UNIVERSAL INTERNET GATEWAY UNIT DKG-210 UNIVERSAL INTERNET GATEWAY UNIT AC & DC SUPPLY VERSIONS DESCRIPTION The DKG-210 is designed for internet monitoring and control of industrial devices using different protocols through the RAINBOW

More information

COMTRAXX COM465DP. Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks

COMTRAXX COM465DP. Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks COM465DP_D00216_00_D_XXDE/10.2015 Condition Monitor with integrated gateway for

More information

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks COM465IP_D00217_00_D_XXDE/10.2015 Condition Monitor with integrated gateway for the connection

More information

BACnet MS/TP Gateways for Mega Controls Modbus RTU Networking Devices

BACnet MS/TP Gateways for Mega Controls Modbus RTU Networking Devices BMG Series Issue Date March 1, 2018 BACnet MS/TP Gateways for Mega Controls Modbus RTU Networking Devices General The BMG Series is a BACnet network gateway which routes communication traffic between BACnet

More information

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks COM465IP_D00217_04_D_XXEN/11.2018 Condition Monitor with integrated gateway for the connection

More information

IQ4NC Controllers. Data Sheet. Features. Description. Physical

IQ4NC Controllers. Data Sheet. Features. Description. Physical Controllers Controllers Description The enables Trend networks on different media (either, Trend current loop, or ) to be joined together in various configurations. It provides 4 virtual CNCs which allow

More information

INSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3

INSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3 INSTALLATION MANUAL LC 200 Electronic Overload Guard Software versione PW0501 R 0.3 CONTENTS MAIN FEATURES LC 200 TECHNICAL FEATURES Page 2 SYMBOLS Page 3 WARNINGS Page 3 IDENTIFICATION DATA PLATE Page

More information

PlantVisorPRO. Plant supervision. Quick guide. Integrated Control Solutions & Energy Savings

PlantVisorPRO. Plant supervision. Quick guide. Integrated Control Solutions & Energy Savings PlantVisorPRO Plant supervision Quick guide Integrated Control Solutions & Energy Savings +040000081 ver. 2.0 14/09/2010 2 Contents 1. Introduction 5 Purpose of this guide... 5 Notes... 5 2. Key 6 3. Completing

More information

Hotel Room Controller

Hotel Room Controller Full Service & Luxury Guest Room Management Solutions Delivering exceptional guest satisfaction while optimizing energy and operational efficiency Product at a Glance The (HRC) is at the heart of our Full

More information

pco 5 programmable controller User Manual NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT!

pco 5 programmable controller User Manual NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT! pco 5 programmable controller User Manual NO POWER & SINAL CABLES TOETHER READ CAREFULLY IN THE TEXT! I n t e g r a t e d C o n t r o l S o l u t i o n s & E n e r g y S a v i n g s EN WARNINS DISPOSAL

More information

Installation Manual rev

Installation Manual rev Installation Manual rev. 20110418 This document contains installation instructions for the switches of the following versions: 200M-2.0.4.ECA 2G-2.0.4.ECA 200M-2.0.4.ECB 2G-2.0.4.ECB 200M-2.0.4.H-ECA 2G-2.0.4.H-ECA

More information

MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide

MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide Third Edition, July 2006 MOXA Networking Co., Ltd. Tel: +886-2-2910-1230 Fax: +886-2-2910-1231 www.moxa.com support@moxanet.com (Worldwide)

More information

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications

More information

Supervisory Systems pcoweb card installation

Supervisory Systems pcoweb card installation Supervisory Systems pcoweb card installation SNMP Modbus over IP BACnet over IP Unit side Serial settings configuration (pcoweb up to rel. 1.4.X) (CRAC units equipped with UG40 terminal) Press PRG button,

More information

enod4 Weighing controller for automated systems

enod4 Weighing controller for automated systems Titre enod4 Weighing controller for automated systems 1 Presentation What is enod4? enod4 is a weighing module especially designed for integration into an automated system It transforms any strain gauge

More information

MAKING MODERN LIVING POSSIBLE AK-255 CO 2. Controller On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS

MAKING MODERN LIVING POSSIBLE AK-255 CO 2. Controller On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS MAKING MODERN LIVING POSSIBLE Controller On-Site Installation Guide DANFOSS ELECTRONIC CONTROLS & SENSORS How to Use This Guide Read this Guide completely as you install and start up your new Controller.

More information

User Guide. For controller on CXAO / RTXB heat pumps CGCM / CXCM 2 circuit units. CNT-SVU005C-GB Original instructions

User Guide. For controller on CXAO / RTXB heat pumps CGCM / CXCM 2 circuit units. CNT-SVU005C-GB Original instructions User Guide For controller on CXAO / RTXB heat pumps CGCM / CXCM 2 circuit units CNT-SVU005C-GB Original instructions Table of contents Advanced electronics... 3 Technical Specifications... 4 Display description...

More information

XT-9100 Technical Bulletin

XT-9100 Technical Bulletin System 9100 Technical Manual 636.4 Technical Bulletins Section Technical Bulletin Issue Date 0896 XT-9100 Technical Bulletin XT-9100 Extension Module/XP-910x Expansion Modules Page 3 Introduction 3 SX

More information

Product startup: G-30 + DIGIWARE C31 - U30-3xI35

Product startup: G-30 + DIGIWARE C31 - U30-3xI35 Product startup: G-30 + DIGIWARE C31 - U30-3xI35 Date: 26/09/2014 From: ADY Verified by: To: All Copy to : The purpose of this document is to explain the setup steps in "point to point" mode or via a Diris

More information

User Guide. Multipipe Units CMAA / RTMA CNT-SVU004B-GB

User Guide. Multipipe Units CMAA / RTMA CNT-SVU004B-GB User Guide Multipipe Units CMAA / RTMA CNT-SVU004B-GB USER GUIDE WARNING Supply the unit at least 24 hours before the initial startup to heat the compressor oil. In conditions of low water temperature,

More information

JNIOR Series 3 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 3.3 NOTE: JNIOR OS 3.4 or greater required

JNIOR Series 3 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 3.3 NOTE: JNIOR OS 3.4 or greater required JNIOR Series 3 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 3.3 NOTE: JNIOR OS 3.4 or greater required INTEG Process Group, Inc. 2919 East Hardies Rd, First Floor Gibsonia,

More information

USER MANUAL Z-KEY MODBUS ETHERNET SERIAL GATEWAY AND SERIAL DEVICE SERVER. Via Austria, PADOVA ITALY

USER MANUAL Z-KEY MODBUS ETHERNET SERIAL GATEWAY AND SERIAL DEVICE SERVER. Via Austria, PADOVA ITALY USER MANUAL Z-KEY MODBUS ETHERNET SERIAL GATEWAY AND SERIAL DEVICE SERVER SENECA s.r.l. Via Austria, 26 35127 PADOVA ITALY Tel. +39.049.8705355 8705359 Fax. +39.049.8706287 Web site: www.seneca.it Technical

More information

Meter Centraliser Alarm Centraliser Unit LM50-TCP (Code M31521) INSTRUCTION MANUAL (M A)

Meter Centraliser Alarm Centraliser Unit LM50-TCP (Code M31521) INSTRUCTION MANUAL (M A) Meter Centraliser Alarm Centraliser Unit LM50-TCP (Code M31521) INSTRUCTION MANUAL (M9813380120-A) 1.- BASIC INSTRUCTIONS 1.1.- Checks on receipt. This manual assists in the installation and handling of

More information

Programmable Set for Ethenet/IP in IP67 TI-BL67-PG-EIP-2

Programmable Set for Ethenet/IP in IP67 TI-BL67-PG-EIP-2 Type designation Ident no. 1545069 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100

More information

EC-BOS-8 Multi-protocol Web Building Controller

EC-BOS-8 Multi-protocol Web Building Controller Datasheet Multi-protocol Web Building Controller Overview Features & Benefits The is a compact, embedded controller and server platform for connecting multiple and diverse devices and sub-systems. With

More information

SATEL I-LINK 100 MB I/O-converter User Guide, Version 1.1

SATEL I-LINK 100 MB I/O-converter User Guide, Version 1.1 TABLE OF CONTENTS TABLE OF CONTENTS... 1 IMPORTANT NOTICE... 2 PRODUCT CONFORMITY... 3 WARRANTY AND SAFETY INSTRUCTIONS... 4 1 GENERAL... 5 1.1 SATEL I-LINK 100 MODBUS I/O- CONVERTER... 5 2 SPECIFICATIONS...

More information

IntesisBox Modbus Server KNX

IntesisBox Modbus Server KNX IntesisBox Modbus Server KNX User Manual r1.0 eng Issue date: 09/2017 Intesis Software S.L.U. 2017 All Rights Reserved. Information in this document is subject to change without notice. The software described

More information

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications

More information

BUILDING MANAGEMENT. OpenBAS-HV-NX10 SERIES CATALOG NUMBER. Description. Features

BUILDING MANAGEMENT. OpenBAS-HV-NX10 SERIES CATALOG NUMBER. Description. Features BUILDING MANAGEMENT OpenBAS-HV-NX10 SERIES Description Mircom s OpenBAS-HV-NX10 series of Building Automation Controllers are aimed to provide various HVAC, energy management, and lighting control solutions

More information

RGX COMMUNICATIONS GATEWAY

RGX COMMUNICATIONS GATEWAY RGX COMMUNICATIONS GATEWAY BTU Ventilation Corporation 47418 US Highway 10 Perham, Mn 56573 USA Phone (218) 346-7482 Fax (218) 346-7485 http:/// Manual ver 2.1 Copyright BTU Ventilation Corp 2008 RGX Communications

More information

PlantWatchPRO. supervisor for small-medium installations. User manual. High Efficiency Solutions

PlantWatchPRO. supervisor for small-medium installations. User manual. High Efficiency Solutions PlantWatchPRO supervisor for small-medium installations User manual High Efficiency Solutions HACCP CAUTION: The Food Safety programs based on HACCP procedures and on certain national standards, require

More information

Remote Terminal Unit ER1000 APPLICATION FEATURES

Remote Terminal Unit ER1000 APPLICATION FEATURES Remote Terminal Unit ER1000 ERL with more than three decades of expertise in Power System Protection have developed state of the art Automation Solutions. The whole family of ERL s Remote Terminal Unit

More information

Technical data sheet. PowerLogic power-monitoring units EM3500 series DIN Rail meter

Technical data sheet. PowerLogic power-monitoring units EM3500 series DIN Rail meter Technical data sheet PowerLogic power-monitoring units series DIN Rail meter The Series DIN Rail Meter combines exceptional performance and easy installation to deliver a cost-effective solution for power

More information

EC-BOS-8 Multi-protocol Web Building Controller

EC-BOS-8 Multi-protocol Web Building Controller Datasheet EC-BOS-8 Multi-protocol Web Building Controller Overview Features & Benefits The EC-BOS-8 is a compact, embedded controller and server platform for connecting multiple and diverse devices and

More information

High Voltage DC Meter

High Voltage DC Meter High Voltage DC Meter Javelin D PD644 0-300 VDC input NEMA 4X, IP65 front Scale in engineering units Sunlight readable LED display 4-20 ma analog output Two form C 3 A relays option RS-485 serial communications

More information

ISOMETER isoev425 with coupling device AGH420

ISOMETER isoev425 with coupling device AGH420 with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles Preliminary datasheet isoev425_d00126_02_d_xxde/09.2015 with coupling device

More information

---- IntesisBox KNX Modbus RTU Master and Modbus TCP Client

---- IntesisBox KNX Modbus RTU Master and Modbus TCP Client ---- IntesisBox KNX Modbus RTU Master and Modbus TCP Client User Manual r1.1 eng Issue date: 05/2018 Intesis Software S.L.U. 2018 All Rights Reserved. Information in this document is subject to change

More information

pco sistema General manual User manual LEGGI E CONSERVA QUESTE ISTRUZIONI READ AND SAVE THESE INSTRUCTIONS

pco sistema General manual User manual LEGGI E CONSERVA QUESTE ISTRUZIONI READ AND SAVE THESE INSTRUCTIONS pco sistema General manual User manual LEGGI E CONSERVA QUESTE ISTRUZIONI READ AND SAVE THESE INSTRUCTIONS We wish to save you time and money! We can assure you that the thorough reading of this manual

More information

Intech Micro 2300-RO4 analogue input station MODBUS RTU slave application supplementary manual.

Intech Micro 2300-RO4 analogue input station MODBUS RTU slave application supplementary manual. Intech Micro 2300-RO4 analogue input station MODBUS RTU slave application supplementary manual. MODBUS supplementary manual to the 2300-RO4 Installation Guide. The 2300 series stations are designed to

More information

User Manual. cmt-svr Startup Guide

User Manual. cmt-svr Startup Guide User Manual cmt-svr Startup Guide Table of Contents Chapter 1 Overview... 1 1.1 Specification... 1 1.2 Dimensions... 2 1.3 Connector pin designations... 3 1.4 USB host port and SD card slot... 3 1.5 Ethernet

More information

DEEP SEA ELECTRONICS PLC

DEEP SEA ELECTRONICS PLC DEEP SEA ELECTRONICS PLC DSE857 Configuration Suite PC Software and Operator Manual Document Number: 057-219 Author: Tony Manton DSE857 Configuration Suite PC Software and Operator Manual ISSUE 1 DSE857

More information

PT2060 Monitor. PT2060/91 SIM System Interface Module. Specifications. Electrical. Messtechnik

PT2060 Monitor. PT2060/91 SIM System Interface Module. Specifications. Electrical. Messtechnik PT2060/ System Interface Module ProvibTech s PT2060/ module is a communication and system interface module. This module is used to: module. The two phase reference channels can be used to provide phase

More information

IntesisBox BACnet IP Server - M-Bus

IntesisBox BACnet IP Server - M-Bus IntesisBox Server - M-Bus Gateway for integration of M-Bus meters into BACnet/IP based control systems Integrate M-Bus meters into your BACnet/IP control system BACnet/IP Ethernet RS232 RS232 / RS485 to

More information

Ethernet HMi RAC and Gateway Setup Instructions Rev. 09

Ethernet HMi RAC and Gateway Setup Instructions Rev. 09 Ethernet HMi RAC and Gateway Setup Instructions Rev. 09 Table of Contents Preparing a PXG-900 Gateway...2 Preparing an ELC-CAENET Module... 7 Configuring the HMi RAC... 10 Preparing the ATC-300+... 13

More information

1. Supplied Items. 2. Connecting the DTS SKT. Input side. Input Side

1. Supplied Items. 2. Connecting the DTS SKT. Input side. Input Side This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-SKT and DTS-STKD power meter through RS-485 communication. These instructions are given using

More information

JNIOR Series 4 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 2.0 NOTE: JANOS OS 1.1 or greater required

JNIOR Series 4 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 2.0 NOTE: JANOS OS 1.1 or greater required JNIOR Series 4 A Network I/O Resource Utilizing the JAVA Platform Getting Started Manual Release 2.0 NOTE: JANOS OS 1.1 or greater required INTEG Process Group, Inc. 2919 East Hardies Rd, First Floor Gibsonia,

More information

Converter Box Data Sheet

Converter Box Data Sheet Page 1 from 6 Functions of the converter box The converter box is used to adapt physically two interfaces and to separate them galvanicly. It is configured as follows: Two interface slots can be used to

More information

VersaMax* IC200BEM003. PROFIBUS Master Module. Ordering Information. Specifications. GFK-2739 April of their respective owners.

VersaMax* IC200BEM003. PROFIBUS Master Module. Ordering Information. Specifications. GFK-2739 April of their respective owners. April 2012 The VersaMax * IC200BEM003 PROFIBUS Master Module allows a VersaMax CPU005, CPUE05 or PROFINET Scanner (PNS) to send and receive data on a PROFIBUS-DP V1 network. The PROFIBUS Master module

More information

Installation and Operation Manual. INTEGRA BTU Meter System

Installation and Operation Manual. INTEGRA BTU Meter System INTEGRA BTU Meter System Meter 1/4 Supply Temp. [F] 79.71 Return Temp. [F] 79.47 Flow [gal/min] 20.00 Energy Rate [kbtu/h] 2.84 Energy Total [kbtu] 646147 ß á à Overview Meter 1 Total [kbtu] 646147 Meter

More information

PRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router

PRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router sales@jumo.co.uk info@jumo.us Data sheet 705060 Page 1/12 JUMO mtron T Measuring, Control, and Automation System Multifunction panel 840 Brief description The multifunction panel 840 has a touchscreen

More information

CLICK PLC Product Overview

CLICK PLC Product Overview CLICK PLC Product Overview The Almost Free PLC that s so simple to use, we named it CLICK. What you can expect: Four Basic CPU modules with discrete I/O Three Analog CPU modules with discrete and analog

More information

MicroTrans EQ Signal Processor. Operation & Maintenance Manual

MicroTrans EQ Signal Processor. Operation & Maintenance Manual MicroTrans EQ Signal Processor Operation & Maintenance Manual Engineered for accuracy, applicability, durability and simplicity in HVAC air systems and industrial process control loops TABLE OF CONTENTS

More information

Gas Controller System DGC-06

Gas Controller System DGC-06 Page 1 May 2016 Measuring, warning and controlling device series for toxic, combustible and refrigerant gases and vapours. The gas controller series DGC-06 is designed in accordance with the standard EN

More information

EtherSeries. EtherSeries CR-2. CR-2-Opto. User s Guide. Revised October 7, 2013 Firmware Version 1.X

EtherSeries. EtherSeries CR-2. CR-2-Opto. User s Guide. Revised October 7, 2013 Firmware Version 1.X EtherSeries EtherSeries CR-2 & CR-2-Opto User s Guide Revised October 7, 2013 Firmware Version 1.X TABLE OF CONTENTS SECTION 1 - DESCRIPTION... 2 SECTION 2 - SPECIFICATIONS... 4 SECTION 3 - INSTALLATION...

More information

quick start guide Carel EVD Evolution MODBUS Device E2 Setup for

quick start guide Carel EVD Evolution MODBUS Device E2 Setup for Carel EVD Evolution MODBUS Device E2 Setup for 527-0355 This document will guide you through setting up and commissioning the Carel EVD Evolution MODBUS device in the E2 controller. Note that Open MODBUS

More information