Position switches FD series

Transcription

1 Position switches FD series Selection diagram Ø 8 mm Ø 1,7 mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere adjustable lever safety adjustable lever bistable bistable ACTUATORS CONTACT BLOCKS slow action slow action slow action snap action snap action snap action slow action slow action and slow action NO+ 3NC +1NC slow action slow action slow action slow action slow action snap action independent closer slow action electronic CONDUIT ENTRY Threaded conduit entry M product option accessory sold separately PG 13,5 (standard) M0x1,5 With assembled cable gland K1 for Ø 6 to Ø 1 mm cables range K5 for Ø 3 to Ø 7 mm cables range With M1 metal connector assembled and wired K40 K50 8 poles from bottom 5 poles from bottom page /3 General Catalog 18

2 Position switches FD series stainless steel roller lever external rubber gasket stainless steel roller lever stainless steel round rod square rod glass fibre rod porcelain roller rope switches for signalling without lever without lever LOOSE ACTUATORS See page /11 Code structure Housing FD metal housing, one conduit entry 5, snap action 6, slow action 7, slow action Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. FD 50-1GMK50 Preinstalled cable gland or connectors K1 K40 no cable gland or connector (standard) with assembled cable gland suitable for Ø 6 to Ø 1 mm cables range with M1 metal connector assembled and wired, 8 poles (only for contact blocks, 0, 1, ) For the complete list of all combinations, please contact our technical office. Actuators 01 short plunger 0 roller lever 05 offset roller lever Threaded conduit entry PG 13,5 (standard) M M0x1,5 Suffix no suffix (standard) with Ø 0 mm stainless steel roller for actuators 0, 05, 31, 35, 51, 5, 56, 57, 41, 4 with Ø 35 mm polymer roller (see special loose actuators on page /1) with Ø 50 mm rubber roller (see special loose actuators on page /1) with Ø 50 mm overhanging rubber roller (see special loose actuators on page /1) Contacts type G silver contacts (standard) silver contacts gold plated 1 µm (contact block excluded) General Catalog 18 page /4

3 Position switches FD series Technical data Housing Metal housing, coated with baked epoxy powder One threaded conduit entry Protection degree: IP67 General data Ambient temperature: Version for operation in ambient temperature from -40 C to +80 C on request from -5 C to +80 C Max operating frequency: 3600 operations cycles 1 /hour Mechanical endurance: 0 million operations cycles 1 Assembling position: any (1) One operation cycle means two movements, one to close and one to open contacts, as foreseen by IEC standard. Main data Metal housing, one conduit entry Protection degree IP67 17 contact blocks available 8 actuators available M1 assembled connector versions Silver contacts gold plated versions Markings and quality marks: Approval IMQ: EG605 Approval UL: Approval CSA: LA Approval EZU: Cross section of the conductors (flexible copper wire) 0, 1,, 33, 34: min. 1 x 0,34 mm (1 x AWG ) max. x 1,5 mm ( x AWG 16) 5, 6, 7, 9, 10, 11, 1, 13, 14, 15, 16, 18: min. 1 x 0,5 mm (1 x AWG 0) max. x,5 mm ( x AWG 14) Contact block : min. 1 x 0,5 mm (1 x AWG 0) max. x 1,5 mm ( x AWG 16) In conformity with standards: IEC , IEC 337-1, EN , CEI EN , CEI 17-45, EN 50041, CEI 17-31, IEC 04-1, EN , CEI 44-5, EN 1088, EN ISO , EN ISO 1100-, IEC 59, EN 6059, CEI 70-1, NFC , VDE , VDE 0113, CENELEC EN Approvals: IEC , UL 508, CSA C- nr.14. In conformity with requirements requested by: Low Voltage Directive 73/3/EEC and subsequent modifications and completions. Machinery Directive 98/37/EEC. Electromagnetic Compatibility 89/336/EEC and subsequent modifications and completions. Positive contact opening in conformity with standards: IEC , EN , CEI EN , VDE Installation for safety applications: Use only switches marked with the symbol. The safety circuit must always be connected with the NC contacts (normally closed contacts: 11-1, 1- or 31-3) as stated in the standard CEI EN , encl. K, par.. The switch must be actuated with at least up to the positive opening travel shown in the travels diagrams on page 6/14. The switch must be actuated at least with the positive opening force, shown in brackets, underneath each article, near the value of the min. force. For the correct installation of all articles, please see Utilization requirements chapter, from page 6/1 to page 6/4. Electrical data Utilization categories without connector Thermal current (Ith): 10 A Rated insulation voltage (Ui): 500 VAC 600 VDC 400 VAC for contact blocks 0, 1,, 33, 34 Protection against short circuits: fuse 10 A 500 V type am Pollution degree: 3 Alternate current: AC15 ( Hz) Ue (V) Ie (A) Direct current: DC13 Ue (V) Ie (A) 6 1,1 0,4 with 5 poles M1 connector with 8 poles M1 connector Thermal current (Ith): 4 A Rated insulation voltage (Ui): 50 VAC 300 VDC Protection against short circuits: fuse 4 A 500 V type gg Pollution degree: 3 Thermal current (Ith): A Rated insulation voltage (Ui): 30 VAC 36 VDC Protection against short circuits: fuse A 500 V type gg Pollution degree: 3 Alternate current: AC15 ( Hz) Ue (V) Ie (A) Direct current: DC13 Ue (V) Ie (A) 4 1,1 0,4 Alternate current: AC15 ( Hz) Ue (V) 4 Ie (A) Direct current: DC13 Ue (V) 4 Ie (A) page /5 General Catalog 18

4 Position switches FD series Data type approved by IMQ and EZU Rated insulation voltage (Ui): 500 VAC 400 VAC for contact blocks 0, 1,, 33, 34 Thermal current (Ith): 10 A Protection against short circuits: fuse 10 A 500 V type am Protection degree: IP67 MV terminals (screw clamps) Pollution degree 3 Utilization category: AC15 Operation voltage (Ue): 400 VAC (50 Hz) Operation current (Ie): 3 A Forms of the contact element: Za, Zb, Za+Za, Y+Y, X+X, Y+Y+X, Y+Y+Y, Y+X+X Positive opening of contacts on contact block 5, 6, 7, 9, 11, 1, 13, 14, 16, 18, 0, 1,, 33, 34 In conformity with standards: EN , EN and subsequent modifications and completions, fundamental requirements of the Low Voltage Directive 73/3 EEC and subsequent modifications and completions. Please contact our technical service for the list of type approved products. Data type approved by UL Utilization categories Q300 (69 VA, VDC) A600 (70 VA, VAC) Data of the housing type 1, 4X (indoor use only), 1, 13 In conformity with standard: UL 508 For all contact blocks except and 3 use 60 or 75 C copper (Cu) conductor and wire size No AWG. Terminal tightening torque of 7,1 Lb-In. For contact blocks and 3 use 60 or 75 C copper (Cu) conductor and wire size No. 14 AWG. Terminal tightening torque of 1 Lb-In. Please contact our technical service for the list of type approved products. Data type approved by CSA Utilization categories Q300 (69 VA, VDC) A600 (70 VA, VAC) Data of the housing type 1, 4X (indoor use only), 1, 13 In conformity with standard: CSA C- nr.14 Please contact our technical service for the list of type approved products. Adjustable levers In switches with revolving lever it is possible to adjust the lever with 10 steps for the whole 360 range. The positive movement transmission is always guaranteed thanks to the particular geometrical coupling between the lever and the revolving shaft as prescribed for safety applications by the German standard BG-GS-ET Overturning levers It s possible to fasten the lever on switches on straight or reverse side, maintaining the positive coupling. In this way it is possible to obtain two different work plans of the lever. Rotating heads In all switches, it is possible to rotate the head in 90 steps. Working operation of contact block 16 with independent contacts The contact block 16 has two NC contacts, both with positive opening activated independently according to the lever turning direction. Lever turned to left Lever not turned Lever turned to right Contacts diagram Contacts diagram Contacts diagram Unidirectional heads In the switches with revolving lever, it is possible to select the directional operation by removing the four screws of the head and revolving the internal piston (contact block 16 excluded). General Catalog 18 page /6

5 Position switches FD series Contacts type: With stainless steel roller on request With stainless steel roller on request R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic 1 FD 501 FD 601 FD 701 FD 901 FD 1001 FD 1101 FD 101 FD 1301 FD 1401 FD 1501 FD 1801 FD 001 1NO+ FD 101 3NC FD 01 +1NC FD 01 FD 01 FD 50 FD 60 FD 70 FD 90 FD 100 FD 110 FD 10 FD 130 FD 140 FD 150 FD 180 FD 00 1NO+ FD 10 3NC FD 0 +1NC FD 0 FD 0 page 6/ - type 3 6 N (5 N ) page 6/14 - group FD 504 FD 604 FD 704 FD 904 FD 1004 FD 1104 FD 104 FD 1304 FD 1404 FD 1504 FD 1804 FD 004 1NO+ FD 104 3NC FD 04 +1NC FD 04 FD 04 0,5 m/s 0,17 Nm FD 505 FD 605 FD 705 FD 905 FD 1005 FD 1105 FD 105 FD 1305 FD 1405 FD 1505 FD 1805 FD 005 1NO+ FD 105 3NC FD 05 +1NC FD 05 FD 05 page 6/ - type 3 6 N (5 N ) page 6/14 - group With external rubber gasket With external rubber gasket 1 page /7 FD 508 FD 608 FD 708 FD 908 FD 1008 FD 1108 FD 108 FD 1308 FD 1408 FD 1508 FD 1808 FD 008 1NO+ FD 108 3NC FD 08 +1NC FD 08 FD 08 All measures in the drawings are in mm Accessories See page 5/1 FD 510 FD 610 FD 710 FD 910 FD 1010 FD 1110 FD 110 FD 1310 FD 1410 FD 1510 FD 1810 FD 010 1NO+ FD 110 3NC FD 10 +1NC FD 10 FD N (5 N ) FD 511 FD 611 FD 711 FD 911 FD 1011 FD 1111 FD 111 FD 1311 FD 1411 FD 1511 FD 1811 FD 011 1NO+ FD 111 3NC FD 11 +1NC FD 11 FD 11 Items with code on the green background are available in stock FD 515 FD 615 FD 715 FD 915 FD 1015 FD 1115 FD 115 FD 1315 FD 1415 FD 1515 FD 1815 FD 015 1NO+ FD 115 3NC FD 15 +1NC FD 15 FD 15 page 6/ - type 11 N (5 N ) General Catalog 18

6 Position switches FD series Ø 8 mm stainless steel sphere Ø 1,7 mm stainless steel sphere Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic 1 FD 516 FD 616 FD 716 FD 916 FD 1016 FD 1116 FD 116 FD 1316 FD 1416 FD 1516 FD 1816 FD 016 1NO+ FD 116 3NC FD 16 +1NC FD 16 FD 16 page 6/ - type FD 518 FD 618 FD 718 FD 918 FD 1018 FD 1118 FD 118 FD 1318 FD 1418 FD 1518 FD 1818 FD 018 1NO+ FD 118 3NC FD 18 +1NC FD 18 FD 18 FD 519 FD 619 FD 719 FD 919 FD 1019 FD 1119 FD 119 FD 1319 FD 1419 FD 1519 FD 1819 FD 019 1NO+ FD 119 3NC FD 19 +1NC FD 19 FD 19 FD 50 FD 100 FD 10 FD 180 FD 00 1NO+ FD 10 3NC FD 0 +1NC FD 0 FD 0 1 m/s 0,09 Nm page 6/14 - group 3 Other rollers available. See page /1 Ø 3 mm stainless steel round rod 1 1I FD 51 FD 101 FD 11 FD 181 FD 01 FD 11 FD 1 FD 1 FD 1 1NO+ 3NC +1NC 1 m/s 0,08 Nm page 6/14 - group 3 FD 55 FD 105 FD 15 Accessories See page 5/1 FD 185 FD 05 1NO+ FD 15 3NC FD 5 +1NC FD 5 FD 5 1 m/s 0,14 Nm page 6/14 - group 3 FD 531 FD 631 FD 731 FD 931 FD 1031 FD 1131 FD 131 FD 1331 FD 1431 FD 1531 FD 1631 FD 1831 FD 031 1NO+ FD 131 3NC FD 31 +1NC FD 31 FD 31 page 6/ - type 1 0,15 Nm (0,5 Nm ) Items with code on the green background are available in stock FD 53 FD 63 FD 73 FD 93 FD 103 FD 113 FD 13 FD 133 FD 143 FD 153 FD 163 FD 183 FD 03 1NO+ FD 13 3NC FD 3 +1NC FD 3 FD 3 1,5 m/s 0,15 Nm General Catalog 18 page /8

7 Position switches FD series 3x3 mm square rod Other rollers available. See page /1 Glass fibre rod Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic 1 1I FD 533 FD 633 FD 733 FD 933 FD 1033 FD 1133 FD 133 FD 1333 FD 1433 FD 1533 FD 1633 FD 1833 FD 033 FD 133 FD 33 FD 33 FD 33 1NO+ 3NC +1NC 1,5 m/s 0,15 Nm FD 534 FD 634 FD 734 FD 934 FD 1034 FD 1134 FD 134 FD 1334 FD 1434 FD 1534 FD 1634 FD 1834 FD 034 FD 134 FD 34 FD 34 FD 34 1NO+ 3NC +1NC 1 m/s 0,15 Nm FD 535 (1) FD 635 (1) FD 735 (1) FD 935 (1) FD 1035 FD 1135 (1) FD 135 FD 1335 (1) FD 1435 (1) FD 1535 FD 1635 (1) FD 1835 (1) FD 035 (1) 1NO+ FD 135 (1) 3NC FD 35 (1) +1NC FD 35 FD 35 page 6/ - type 1 0,15 Nm (0,5 Nm ) FD 536 FD 636 FD 736 FD 936 FD 1036 FD 1136 FD 136 FD 1336 FD 1436 FD 1536 FD 1636 FD 1836 FD 036 1NO+ FD 136 3NC FD 36 +1NC FD 36 FD 36 1,5 m/s 0,15 Nm 1 1I Other rollers available. See page /1 Other rollers available. See page /1 Porcelain roller Other rollers available. See page /1 FD 551 FD 651 FD 751 FD 951 FD 1051 FD 1151 FD 151 FD 1351 FD 1451 FD 1551 FD 1851 FD 051 1NO+ FD 151 3NC FD 51 +1NC FD 51 FD 51 page 6/ - type 1 0,09 Nm (0,5 Nm ) Accessories See page 5/1 (1) Positive opening only with lever adjusted on the max. See page /11 FD 55 FD 65 FD 75 FD 95 FD 105 FD 115 FD 15 FD 135 FD 145 FD 155 FD 185 FD 05 1NO+ FD 15 3NC FD 5 +1NC FD 5 FD 5 page 6/ - type 1 0,09 Nm (0,5 Nm ) FD 553-1V9 FD 653-1V9 FD 753-1V9 FD 953-1V9 FD V9 FD 153-1V9 FD V9 FD V9 FD V9 FD V9 FD 053-1V9 1NO+ FD 153-1V9 3NC FD 53-1V9 +1NC FD 53-1 FD 53-1V9 0,5 m/s 0,06 Nm (0,5 Nm ) page 6/14 - group 5 FD 556 FD 656 FD 756 FD 956 FD 1056 FD 1156 FD 156 FD 1356 FD 1456 FD 1556 FD 1656 FD 1856 FD 056 FD 156 FD 56 FD 56 FD 56 Items with code on the green background are available in stock 1NO+ 3NC +1NC page 6/ - type 1 0,15 Nm (0,5 Nm ) page /9 General Catalog 18

8 Position switches FD series Other rollers available. See page /1 With stainless steel rollers on request With stainless steel rollers on request Rope switches for signalling Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic 1 1I FD 557 FD 657 FD 757 FD 957 FD 1057 FD 1157 FD 157 FD 1357 FD 1457 FD 1557 FD 1657 FD 1857 FD 057 FD 157 FD 57 FD 57 FD 57 1NO+ 3NC +1NC page 6/ - type 1 0,15 Nm (0,5 Nm ) FD 541 Bistable switch with single track lyra lever S = mechanical snap point 0,5 m/s with 30 cam 0,1 Nm FD 54 Bistable switch with double tracks lyra lever S = mechanical snap point 0,5 m/s with 30 cam 0,1 Nm FD 576 FD 676 FD 776 FD 976 FD 1076 FD 1176 FD 176 FD 1376 FD 1476 FD 1576 FD 1876 FD NC FD 176 3NO FD 76 1NO+ FD 76 0,5 m/s initial 0 N - final 40 N page 6/14 - group 6 1 1I Accessories See page 5/1 Items with code on the green background are available in stock General Catalog 18 page /10

9 Position switches FD series Position switches with revolving lever without actuator Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic 1 1I Regular head FD 538 FD 638 FD 738 FD 938 FD 1038 FD 1138 FD 138 FD 1338 FD 1438 FD 1538 FD 1638 FD 1838 FD 038 1NO+ FD 138 3NC FD 38 +1NC FD 38 FD 38 0,15 Nm (0,5 Nm ) Compact head FD 558 FD 658 FD 758 FD 958 FD 1058 FD 1158 FD 158 FD 1358 FD 1458 FD 1558 FD 1858 FD 058 1NO+ FD 158 3NC FD 58 +1NC FD 58 FD 58 0,09 Nm (0,5 Nm ) IMPORTANT For safety applications: join only switches and actuators marked with symbol. For more information about safety applications see page 6/1. Items with code on the green background are available in stock Accessories See page 5/1 Loose actuators IMPORTANT: These loose actuators can be used with items of series FD, FP, FL, FC only Polymer roller Ø 0 mm Adjustable round rod Ø 3x15 mm Adjustable square rod 3x3x15 mm Flexible rod actuator Adjustable actuator with polymer roller Adjustable glass fibre rod Polymer roller Ø 0 mm Polymer roller Ø 0 mm Porcelain roller Adjustable safety actuator with polymer roller Polymer roller Ø 0 mm Article VF L31 VF L3 VF L33 VF L34 VF L35 (1) VF L36 Article VF L51 VF L5 VF L53 () VF L56 VF L57 - Only orders for multiple quantities of the packs are accepted. - (1) Actuator VF L35 suits to safety applications only if adjusted to its max length, as you can see in figure beside. If you need an adjustable lever for safety applications, use the adjustable safety lever VF L56. - () The position switch obtained by assembling the switch FD 58 (e.g. FD 558, FD 658) with the actuator VF L53 will not present the same travel diagrams and actuating forces as the position switch FD 53-1V9 (e.g. FD 553-1V9, FD 653-1V9...). - If it is installed with switch FD 58 (e.g. FD 558, FD 658..), the actuator can mechanically interfere with the housing of the switch. The interference could happen or not according to the actuator and the head fixing position. - The actuator cannot be oriented to inside direction because it will mechanically interfere with the switch head. page /11 General Catalog 18

10 Position switches FD series Special loose actuators IMPORTANT: These loose actuators can be used with items of series FD, FP, FL, FC only Ø 0 mm stainless steel rollers Article VF L31-1 VF L35-1 (1) VF L51-1 VF L5-1 VF L56-1 VF L57-1 Ø 35 mm polymer rollers Article VF L31- VF L35- (1) VF L51- VF L5- VF L56- VF L57- Ø 40 mm rubber rollers Article VF L31-R5 VF L35-R5 (1) VF L51-R5 VF L5-R5 VF L56-R5 VF L57-R5 Ø 50 mm rubber rollers Article VF L31-3 VF L35-3 (1) VF L51-3 VF L5-3 VF L56-3 VF L57-3 Ø 50 mm overhanging rubber rollers Article VF L35-4 (1) VF L56-4 General Catalog 18 page /1