CSW-HD44014K Pro AV/IT 4K 4x4 HDMI Matrix, 18Gbps (YUV:444), HDCP 2.2 Operation Manual

Transcription

1 CSW-HD44014K Pro AV/IT 4K 4x4 HDMI Matrix, 18Gbps (YUV:444), HDCP 2.2 Operation Manual Page 1 of 19

2 Thank you for purchasing this product. For optimum performance and safety, please read the instruction carefully before connecting, operating or adjusting this product. Please keep the manual for future reference. 1. Introduction The HDMI 4x4 matrix switcher features four HDMI inputs and four HDMI outputs. It provides true matrix routing for HDMI signals. It supports the transmission of video (resolutions up to Ultra HD 4:4:4) and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. It works with Blue-Ray players, Set-Top boxes, Home Theater PCs, and game consoles. Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP or the selection buttons on the front panel. This device also supports all HDMI 3D formats. 2. Features HDMI2.0, HDCP2.2/HDCP1.4 compliant Supports video format up to with 24bit RGB/YCbCr 4:4:4/YCbCr 4:2:2, and up to with 12bit YCBCR 4:2:0 Supports color space conversions among RGB, YCbCr4:4:4, YCbCr4:2:2 and xvycc video formats Supports all HDMI 3D formats up to Supports high resolution VESA mode video format up to Supports reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS and HBR Supports simultaneous HDMI Coax and L/R audio outputs Supports smart EDID management Supports RS-232, remote control, on-panel control and TCP/IP Control Page 2 of 19

3 3. Package Contents 1 x HDMI 4x4 Matrix Switcher 1 x 12V/2.5A Power Adapter 1 x Operation Manual 1 x Wideband IR Rx cable 1 x HDMI Matrix IR Remote 2 x Mounting ears(matrix) 1 x RS-232 cable 4. Specifications Video Bandwidth 594MHz [18Gbps] Support Video Resolution 480i, 576i, 480p, 576p, 720p, 1080i, 1080p24/30/50/60, 2160p24/25/30/50/60; Input Ports 4 HDMI, 1 IR Receiver, 1 RS-232, 1xRJ-45(Control) Output Ports 4 HDMI, 4 Toslink, 4 L/R HDMI connector Type A 19 pin female RJ-45 connector WE/SS 8P8C 3.5mm connector IR Receiver ESD Protection Human-body Model: ± 8kV (Air-gap discharge) ± 4kV (Contact discharge) Power Supply 12V/2.5A DC (US/EU standards, CE/FCC/UL certified) Dimensions 440 mm (W) 200 mm (D) 45 mm (H) Weight 1820 g Chassis Material Metal Silkscreen Color Black Page 3 of 19

4 Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF Storage Temperature 20 ºC~60 ºC/ 4 ºF~140 ºF Relative Humidity 20~90 % RH (non-condensing) Power Consumption 30 W(max)/0.5w(Standby) 5. PANEL FUNCTIONS 5.1 Front Panel 1. LCM: Displays information of each input and output setting and EDID management. 2. IR: IR Receiver window (accepts the remote-control signal of this device only). POWER: Press this button to power the device on/off. The LED will illuminate green when the power is on, red when in 'Standby' mode. LOCK: Press this button to lock all the buttons on the panel. Press again to unlock. 3. OUTPUT/INPUT: Press the OUTPUT and INPUT button to select the output corresponding input. For example: Press OUPUT ALL > INPUT 1, The OUTPUT A, B, C, D will be set to INPUT 1. Page 4 of 19

5 Press PTP button, The OUTPUT A, B, C, D will be corresponding INPUT 1, 2, 3, EDID: Smart EDID management, the LCM will display the EDID operation. Press the MENU button to enter the EDID management window. Press UP/DOWN button to select the needed EDID setting. Press ENTER to download EDID into input source. Easily download any EDID setting to any input port. Note: The EDID mode table as below EDID Mode EDID Description p, 2CH AUDIO p, DOLBY/DTS p, HD AUDIO i, 2CH AUDIO i, DOLBY/DTS i, HD AUDIO 7 3D,1080p, 2CH AUDIO 8 3D, 1080p, DOLBY/DTS D,1080p, HD AUDIO 10 4K30_444, 2CH AUDIO 11 4K30_444, DOLBY/DTS K30_444, HD AUDIO 13 4K60_420, 2CH AUDIO 14 4K60_420, DOLBY/DTS K60_420, HD AUDIO 16 4K60_444, 2CH AUDIO 17 4K60_444, DOLBY/DTS K60_444, HD AUDIO 19 Copy from HDMI OUTPUT A 20 Copy from HDMI OUTPUT B 21 Copy from HDMI OUTPUT C 22 Copy from HDMI OUTPUT D Page 5 of 19

6 EDID. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information from a connected device/display to know what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible with the attached device/display. This information is called EDID (Extended Display Information Data) and a source device can only accept and read one EDID from a connected device/display. Likewise, the source can only output one resolution to a connected device/display. Why is EDID so important with the HDMI Matrix? The Matrix is a complex piece of technology that replicates and switches between multiple inputs and outputs. Each connected source device will require one EDID to read. EDID management is carefully handled by the HDMI Matrix to provide a single EDID for each source to read. What options do I have to manage the EDID in the HDMI Matrix? First, it is important to note that each source device can only output one video/audio signal type. This includes resolutions and timings. When multiple devices/displays are used, such as with the HDMI Matrix, it is important to use devices/displays that have similar or compatible resolutions/features. This will ensure that the single video/audio signal produced by the source device is accepted by all of the connected output devices/displays. The user has the option, through the EDID management window, to choose how the unit will manage the EDID from multiple HDMI devices/displays. Therefore, the user has some control over the resolutions/features that the source devices will output. The HDMI Matrix has multiple EDID management modes that will control how the EDID information from multiple devices/displays are combined, ignored, and routed. Page 6 of 19

7 5.2 Rear Panel 1. PC CONTROL TCP/IP: This port is the link for TCP/IP control and connects to an active Ethernet link by an RJ-45 cable. RS232: Connect to a PC or control system by D-Sub 9-pin cable for the transmission of RS-232 commands. 2. HDMI INPUT: Connect to an HDMI source device 3. AUDIO OUPUT: The coaxial and L/R audio output to audio amplifiers or speakers. 4. HDMI OUTPUT: Connect to HDMI equipped TVs or monitors. 5. IR EXT: If the front IR sensor of unit is obstructed or the unit is installed in a closed area out of infrared line of sight, the IR RX receiver included can be inserted into the IR EXT port at the rear to extend the IR sensor range and enable local control of the matrix. 6. DC POWER INPUT: Connect to 12V/2.5A DC power adapter. Page 7 of 19

8 6. Remote Control 1. Press this button to power on the matrix or set to standby mode. 2. Press these buttons to select output A, B, C, D for input 1, 2, 3, 4 ports. Page 8 of 19

9 7. PC Controller user guide Installation Matrix controller is green software. Just copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP to complete installation. Preparation Connect PC and Matrix by RS232 cable (headers of both sides of cable should be FEMALE) or TCP/IP (local area network) Power-up the Matrix Double click MatirxController.exe icon to run the application How to control Matrix General page Page 9 of 19

10 1. Select RS232 COM or TCP mode 2. Select RS232 COM port 3. Click to connect or disconnect PC with Matrix 4. Select Matrix IP 5. Connect to Matrix IP 6. Search Matrix IP 7. Configure Matrix IP and MAC 8. Click to reset to the factory settings 9. Reboot Matrix system 10. Device information display area 11. Click to refresh device status: include device information displayed in 10 areas and Input/output settings on Matrix page 12. Click to clear device information 13. Enable or disable Beep 14. Power on/off Matrix system Configure TCP After action of 7, edit form will pop-up as below: 1. Select auto or static IP 2. Set the Matrix IP 3. Set the Matrix MAC Page 10 of 19

11 EDID control page The controller has 3 methods to set the EDID mode. Manual mode, Copy mode and open EDID file mode. 1. Select the needed EDID to input port and click set button to download EDID to the selected HDMI input port. 2. Copy the selected HDMI output EDID and click set button to download EDID to the selected HDMI input port. 3. Open the user define EDID file and click set button to download EDID to the selected HDMI input port. 4. Click the status button to refresh input EDID status. Page 11 of 19

12 Matrix page 1. LED which display Input number for respective Output 2. Click to select Input port for respective Output port 3. Click to select previous or next Input port for respective Output port 4. Select ON/OFF to enable/disable ARC function Page 12 of 19

13 FW upgrade page 1. Click to open FW file (file extension is.fw ) 2. Display the FW file path 3. Display the progress of the software upgrade 4. Click to upgrade the Matrix software 5. Display the message of the software upgrade Page 13 of 19

14 8. Basic Installation Diagram 1. Connect up to 4 sources such as a Blue-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to each HDMI input port on the unit. Do not hot plug! Insert and unplug cables carefully with the power switch off. Connecting and disconnecting cables while the unit is powered can result in damage to the circuitry. 2. Connect each HDMI output to high-definition displays such as a HDTV or HD projector that has HDMI input. Note: High-speed HDMI cables are recommended for the distances required for each connection. 3. Plug in IR receiver to the port of the IR EXT on rear unit if needed. 4. Plug in DC power adapter first, followed by each display device and source device. Page 14 of 19

15 CSW-HD44014K RS232 Commands Baudrate: Data Width: 8 bit Parity: None Stop: 1 bit DHCP: Enabled (default) IP Port: 23 Genreral: Factory Reset Reboot Status A5 5B 08 0A EE A5 5B 08 0D EB A5 5B FA A5 5B F9 A5 5B F9 A5 5B F8 A5 5B F8 A5 5B F7 A5 5B F7 A5 5B F6 //INPUT1 5V Status //OUTPUTA HPD Status //INPUT2 5V Status // OUTPUTB HPD Status //INPUT3 5V Status //OUTPUTC HPD Status //INPUT4 5V Status // OUTPUTD HPD Status Enable Beep Disable A5 5B F Enable A5 5B F 00 DD D Power On/Off Off On A5 5B 08 0B F0 00 F D A5 5B 08 0B 0F 00 0F CF EDID: Set EDID XXX Mode to IN1 1080P,Stereo Audio 2.0 A5 5B F P,Dobly/DTS 5.1 A5 5B F i,HD Audio 7.1 A5 5B F i,Stereo Audio 2.0 A5 5B F i,Dobly/DTS 5.1 A5 5B F i,HD Audio 7.1 A5 5B F D,Stereo Audio 2.0 A5 5B F D,Dobly/DTS 5.1 A5 5B F D,HD Audio 7.1 A5 5B F K2K30,444,Stereo Audio 2.0 A5 5B A F K2K30, 444, Dobly/DTS 5.1 A5 5B B F FF 4K2K30, 444, HD Audio 7.1 A5 5B C F FE Page 15 of 19

16 4K2K60,420,Stereo Audio 2.0 4K2K60, 420,Dobly/DTS 5.1 4K2K60, 420,HD Audio 7.1 4K2K60, 444, Stereo Audio 2.0 4K2K60, 444, Dobly/DTS 5.1 4K2K60, 444, HD Audio 7.1 A5 5B D F FD A5 5B E F FC A5 5B F F FB A5 5B F FA A5 5B F F9 A5 5B F F8 Set EDID XXX Mode to IN2 1080P,Stereo Audio 2.0 A5 5B F P,Dobly/DTS 5.1 A5 5B F i,HD Audio 7.1 A5 5B F i,Stereo Audio 2.0 A5 5B F i,Dobly/DTS 5.1 A5 5B F i,HD Audio 7.1 A5 5B F D,Stereo Audio 2.0 A5 5B F D,Dobly/DTS 5.1 A5 5B F D,HD Audio 7.1 A5 5B F K2K30,444,Stereo Audio 2.0 A5 5B A F FF 4K2K30, 444, Dobly/DTS 5.1 A5 5B B F FE 4K2K30, 444, HD Audio 7.1 A5 5B C F FD 4K2K60,420,Stereo Audio 2.0 A5 5B D F FC 4K2K60, 420,Dobly/DTS 5.1 A5 5B E F FB 4K2K60, 420,HD Audio 7.1 A5 5B F F FA 4K2K60, 444, Stereo Audio 2.0 A5 5B F F9 4K2K60, 444, Dobly/DTS 5.1 A5 5B F F8 4K2K60, 444, HD Audio 7.1 A5 5B F F7 Set EDID XXX Mode to IN2 Set EDID XXX Mode to IN3 Set EDID XXX Mode to ALL 1080P,Stereo Audio 2.0 A5 5B F B 1080P,Dobly/DTS 5.1 A5 5B F A 1080i,HD Audio 7.1 A5 5B F i,Stereo Audio 2.0 A5 5B F i,Dobly/DTS 5.1 A5 5B F i,HD Audio 7.1 A5 5B F D,Stereo Audio 2.0 A5 5B F D,Dobly/DTS 5.1 A5 5B F D,HD Audio 7.1 A5 5B F K2K30,444,Stereo Audio 2.0 A5 5B A F K2K30, 444, Dobly/DTS 5.1 A5 5B B F K2K30, 444, HD Audio 7.1 A5 5B C F K2K60,420,Stereo Audio 2.0 A5 5B D F FF 4K2K60, 420,Dobly/DTS 5.1 A5 5B E F FE 4K2K60, 420,HD Audio 7.1 A5 5B F F FD 4K2K60, 444, Stereo Audio 2.0 A5 5B F FC Page 16 of 19

17 4K2K60, 444, Dobly/DTS 5.1 4K2K60, 444, HD Audio 7.1 A5 5B F FB A5 5B F FA Copy EDID From xxx to IN1 HDMI OUT A HDMI OUT B HDMI OUT C HDMI OUT D Copy EDID From xxx to IN2 HDMI OUT A HDMI OUT B HDMI OUT C HDMI OUT D Copy EDID From xxx to IN3 HDMI OUT A HDMI OUT B HDMI OUT C HDMI OUT D Copy EDID From xxx to IN4 HDMI OUT A HDMI OUT B HDMI OUT C HDMI OUT D Copy EDID From xxx to ALL HDMI OUT A HDMI OUT B HDMI OUT C HDMI OUT D Input EDID List IN1 IN2 IN3 IN4 A5 5B F7 A5 5B F6 A5 5B F5 A5 5B F5 A5 5B F6 A5 5B F5 A5 5B F4 A5 5B F3 A5 5B F5 A5 5B F4 A5 5B F3 A5 5B F2 A5 5B F4 A5 5B F3 A5 5B F2 A5 5B F1 A5 5B F9 A5 5B F8 A5 5B F7 A5 5B F6 A5 5B 01 0C F2 A5 5B 01 0C F1 A5 5B 01 0C F0 A5 5B 01 0C EF Matrix: OUTPUT A IN1 IN2 IN3 IN4 A5 5B F9 A5 5B F8 A5 5B F7 A5 5B F6 OUTPUT B Page 17 of 19

18 IN1 IN2 IN3 IN4 OUTPUT C IN1 IN2 IN3 IN4 OUTPUT D IN1 IN2 IN3 IN4 A5 5B F8 A5 5B F7 A5 5B F6 A5 5B F5 A5 5B F7 A5 5B F6 A5 5B F5 A5 5B F4 A5 5B F6 A5 5B F5 A5 5B F4 A5 5B F3 Upgrade: Device Type: A5 5B CC Output Count: A5 5B CC SW Version: A5 5B CC Upgrade: A5 5B F1 A5 5B F0 Page 18 of 19

19 80 Little Falls Road, Fairfield, NJ Phone: l Fax: Page 19 of 19