Protection components

Transcription

1 << Back Selection guide Fuse protection Applications Protection of control circuits or transformers Breaking under load Fuse type (emergency stop) NF C or DIN Cartridge fuses A Device type Fuse carriers Device type reference DF, GK-C, D, E, F Pages 0/ 00Q_Ver.0-EN.fm/

2 Motor protection Protection of motors or variable speed drives Yes, only if combined with a contactor. Yes NF C, DIN, BS or UL 0 A Switch-disconnector-fuses LS, GK-E, GK-F (without fuses) GS 07/ 0Q/ and 0Q/ 00Q_Ver.0-EN.fm/

3 Characteristics Fuse carriers for the protection of control circuits or transformers Type DF-AB08 GK-C DF-AB0 GK-D GK-E GK-F Environment Conforming to standards NF C -0 NF C -0 IEC 97- IEC 97- IEC 97- IEC 97- IEC 97- IEC 97- Protective treatment TC TC TC TC TC TC Ambient air temperature C for operation with links without derating Operating position ± ± ± ± ± ± in relation to normal vertical mounting position Pole characteristics Fuse size 8. x. 8. x. 0 x 8 0 x 8 x x 8 Rated operational voltage V with links, a.c. operation Maximum continuous current (for ambient temperature 0 C) () With links A With am cartridge A fuses With gg cartridge A fuses Permissible short-circuit currents (with links) Maximum ka peak value (dynamic stress) Short-time ka rating (rms value cos ϕ =0.) Duration ms Cabling Maximum c.s.a. (without cable end) Number of conductors Flexible cable mm Solid cable mm Tightening torque N.m.... References : page 0/ () For use at ambient temperature > 0 C, apply a derating coefficient equivalent to 0 - ambient temperature 80 Dimensions : pages 0/ and 0/ Schemes : page 0/ 0_Ver.0-EN.fm/

4 References Fuse carriers for the protection of control circuits or transformers DF-N0 DF-AB0 GK-EN GK-CF GK-DF GK-EF Fuse carriers () Rated Size of Composition Sold Unit Weight thermal cartridge fuse in reference current or link lots of kg 0 A 8. x. P DF-AB N DF-N P + N () GK-CC 0. P GK-CD 0. P GK-CF 0. P + N () GK-CH 0.9 A 0 x 8 P DF-AB N DF-N P + N () GK-DC 0. P GK-DD 0. P GK-DF 0. P + N () GK-DH A x P GK-EB 0.0 N GK-EN 0.0 P + N () GK-EC 0.7 P GK-ED 0. P GK-EF 0.9 P + N () GK-EH 0. A x 8 P GK-FB 0.0 N GK-FN 0.0 P + N () GK-FC 0.80 P GK-FD 0.0 P GK-FF 0.90 P + N () GK-FH 0.90 Blown fuse indicators (neon) For use on Operational Sold Unit Weight fuse carriers voltage in reference lots of kg DF, GK-C, D and E V 0 GK-AS 0.00 GK-AS GK-AP/ Fuse carrier assembly strips () Fuse carriers to be assembled Sold Unit Weight Type Number in reference lots of kg DF 0 GK-AP GK-AP GK-AP 0.00 GK-E 0 GK-AP GK-AP GK-AP 0.00 GK-F 0 GK-AP GK-AP 0.00 Detail of assembly clip mounting 0 GK-AP () Each pole can be marked. A groove is provided on the control lever for this purpose. Marking by means of AR-M/0 markers using positioning tool AT-PA. () N: neutral pole fitted with a locked link as standard. () Strips are supplied with all the clips needed for assembling the fuse carriers together. Characteristics : page 0/ Dimensions : pages 0/ and 0/ Schemes : page 0/ 0_Ver.0-EN.fm/

5 Dimensions, mounting Fuse carriers for the protection of control circuits or transformers Modular fuse carriers 0 A and A Mounting on rail AM-DP00 DF-AB GK-/C GK-/F GK-/H DF-N0 GK-/D 8, 8 a 7, 7, x7, x7, x7, a pole 0.,, poles Modular fuse carriers 0 A Mounting on rail AM-DP00 GK-EB GK-EC GK-EF GK-EH GK-EN GK-ED 9 0, a 7,,x7, x7,,x7, x7, a pole 78.,, poles 8 Modular fuse carriers A Mounting on rail AM-ED GK-FB GK-FC GK-FF GK-FH GK-FN GK-FD 0 7 a x7, x7, x7, 8x7, a GK-FB, FN 78. GK-FC, FD, FF, FH 8 Characteristics : page 0/ References : page 0/ Schemes : page 0/ 0_Ver.0-EN.fm/

6 Mounting, schemes Fuse carriers for the protection of control circuits or transformers Modular fuse carriers A Mounting on pre-slotted mounting plate AM-PA GK-FB, FN GK-FC, FD, FF, FH AF-EA a AF-EA 00/0 00/ a a GK- FC FD FF FH a 70 0 a 9 Schemes Modular fuse carriers DF-AB/ DF-N GK-/C GK-/D N N GK-/F GK-/H GK-/B GK-/N Characteristics : page 0/ References page 0/ Dimensions : page 0/ 0_Ver.0-EN.fm/

7 Selection Fuse carriers for motor protection Operation: Safety The fuse carrier performs two basic functions: / It isolates the downstream circuit by means of a visible break and wide opening contacts. / It holds the cartridge fuses designed to protect the installation against short-circuits. The type of cartridge fuse needed to protect the circuit must be determined before selecting the fuse carrier. Cartridge fuse selection (type, rating, size) Type Application / Motor protection. / Transformer protection. Solution / am type fuses. These fuses are designed to withstand high current peaks of a very short duration. They must be combined with a thermal overload relay coupled with a contactor. Application / Lighting circuit protection. / Supply line protection. / Furnace protection. Solution / gg type fuses, which are more widely used but whose limiting capacity is weaker than that of am type fuses. Rating gg fuses See standard NF C -00. am fuses Table A paragraph -- and table C paragraph -. Motors Motors Cartridge fuses Fuse carrier x 0 V x 00 V type am P In P In Size Rating Size Fuse carrier selection 9 kw A kw 8. A 0 x 8 A LS-D kw 9 A kw A x 0 A GK-EK kw 7 A 7 kw 7 A x 8 80 A GK-FK 0 kw 0 A kw 0 A x 8 A GK-FK Use the fuse characteristics table opposite to select the correct fuse size according to: / the nominal current of the circuit to be protected, / the operational voltage. Application Solution Application Isolation of a circuit for safety reasons only. The fuse carrier may be fitted with links. The maximum permissible current is indicated in the pole characteristics table opposite. Isolation of a circuit and its protection against short-circuits. Solution Recommendations for use Select a fuse carrier according to: / the type of cartridge fuse required, / the maximum permissible current in the fuse carrier poles (see pole characteristics table opposite). If the operational current is greater then the maximum permissible current in the poles of the fuse carrier corresponding to the cartridge fuse size selected, select the fuse carrier the next size up. The safety provided by using a fuse carrier can be increased by adding a padlocking device with up to three padlocks. The fuse carrier conforms to utilisation category AC-A/A of the standard IEC 97-. It is therefore recommended that the fuse carrier early break auxiliary contacts be inserted in the coil circuit of the contactor with which it is in series. If the fuse carrier is not associated with a contactor, it is essential to ensure that it will be operated off-load. Characteristics: page 0/ References: pages 07/ and 07/ Dimensions: page 08/ Schemes: page 08/ 0_Ver.0-EN.fm/

8 Characteristics Fuse carriers for motor protection Fuse carrier type LS-D LS-D GK-E/ GK-F/ Environment Conforming to NF EN 097- / / / standards IEC 97- / / / Product certifications BV, UR Protective treatment TH TC TC Ambient air temperature C for operation with links without derating Maximum tilt ± ± ± in relation to normal vertical mounting position Pole characteristics Fuse size 0 x 8 0 x 8 x x 8 Rated operational voltage V with links, a.c. supply Maximum continuous current Min. Ø at ambient temperature 0 C () cable/ie - with tubular links mm /A / or / or./ - with am fuses mm /A / or / or./0 - with gg fuses mm /A / or./0 or./ Early break contact characteristics / or./ 0/0 or /0 / or /00 / or./0 0/0 or / / or /00./0 or./ 0/0 or / /00 or /80 Rated operational voltage V "Ã00, $Ã0 "Ã0, $Ã0 "Ã00, $Ã0 "Ã00, $Ã0 Conventional thermal current A.. Cartridge fuse characteristics Fuse size 0 x 8 x x 8 Type am " 00 V A 0 " 00 V A 0 80 " 0 V A 0 Type gg " 00 V A 0 00 " 00 V A " 0 V A 0 Maximum power dissipated W by fuse Cabling Connection by screw clamp terminals or connectors Number and c.s.a. of conductors Min. Max. Min. Max. Min. Max. Min. Max. Solid mm x x x. x x x 70 Flexible without cable end mm x. x x. x x x 0 Flexible with cable end mm x x x. x x x Connection Screw clamp Connector Connector Tightening torque N.m.7 Connection by spring terminals Number and c.s.a. of conductors Min. Max. Min. Max. Min. Max. Min. Max. Solid mm x () x Flexible without cable end mm x. () x () For use in an installation with ambient temperature > C, apply a derating 0 - t ambient coefficient = to 80 () For cross-sections to. mm, the use of an LA9-D99 cable end reducer is recommended. Selection: page 0/ References: page 07/ and 07/ Dimensions: page 08/ Schemes: page 08/ 0_Ver.0-EN.fm/

9 References Fuse carriers -pole basic blocks 000_ Rating Cartridge Number of Single-phase Reference Weight fuse early break protection () size contacts () device () kg Connection by spring terminals A 0 x 8 () Without LS-D 0.70 Connection by screw clamp terminals or connectors A 0 x 8 () Without LS-D 0.00 LS-D 0 A x Without GK-EK 0.0 With GK-EV _ Without GK-ES 0.70 With GK-EW 0.0 A x 8 Without GK-FK 0.80 With GK-FV Without GK-FS LS-D -pole basic blocks With GK-FW Connection by screw clamp terminals or connectors A 0 x 8 () Without LS-D LA8-D () 0 A x Without GK-EM 0.70 With GK-EY 0.00 Without GK-ET 0.0 GK-FK With GK-EX _ 000_ A x 8 Without GK-FM.090 With GK-FY.0 Without GK-FT.0 With GK-FX.0 Fuse carriers for North American market and 0 A basic blocks: please consult your Regional Sales Office. LS-D + LA8-D () With or early break contacts to be inserted in the contactor control circuit. () Fuse carriers with single-phase protection device must be fitted with striker fuses. () LS-D: clips directly onto a mm È rail or screw fixing. GK: clips directly onto a mm È rail or Telequick mounting plate. () Addition of add-on contact block, see page 07/. () Can be mounted on left-hand or right-hand side of the basic block. Selection: page 0/ Characteristics: page 0/ Dimensions: page 08/ Schemes: page 08/ 07_Ver.-EN.fm/

10 References Fuse carriers Operators and accessories Add-on contact blocks 8088 Description For use Mounting Maximum Type of Sold in Unit Weight on number contacts lots of reference kg Instantaneous LS-D Front N/O + N/C 0 GV-AE 0.00 auxiliary contacts N/O + N/O 0 GV-AE LS-D Front N/O + N/C 0 GV-AE 0.00 GK-FK + GK-AP07 Operators N/O + N/O 0 GV-AE Side handles For fuse carrier For Reference Weight Rating Number mounting of poles on kg A or Right-hand side GK-AP Front handles () Left-hand side GK-AP A Fitted as standard External handles A or Right or left-hand side DK-FB A or Right-hand side GK-AP Left-hand side GK-AP A or Right-hand side GK-AP Padlocking devices () Left-hand side GK-AP For fuse carrier Reference Weight Rating Number Single-phase of poles protection device kg A or Without integral 0 A Without GK-AV Links With GK-AV Without GK-AV With GK-AV For fuse carrier Sold Unit Weight Rating Number in reference of poles lots of kg Tubular links A or 0 DK-CB9 () A or 0 DK-EB9 () 0.0 A or 0 DK-FA9 () 0.00 () Fitted as standard on, 0 and A fuse carriers. () For the A rating, use side handles GK-AP07 or GK-AP08. () For use on a neutral circuit, the tubular link can be interlocked with special device LA8-D90 (sold in lots of 0). () Fuse carriers GK 0 and A are fitted with an interlocked neutral tubular link as standard. Selection: page 0/ Characteristics: page 0/ Dimensions: page 08/ Schemes: page 08/ 07_Ver.-EN.fm/

11 07_Ver.-EN.fm/

12 References (continued) Accessories Accessories for LS-D (screw clamp terminals) Description Application Sold in Unit Weight lots of reference kg Mounting plate LS-D and contactor LC-D09 to D8 with front faces aligned LAD Combination blocks Between LS-D and contactor 0 GV-AF LC-K or LP-K Between LS-D and contactor 0 GV-AF 0.0 LC-D09...D8 Between LS-D mounted on LAD- 0 GV-AF 0.0 and contactor LC-D09...D8 Description Application Pitch Reference Weight mm kg Sets of -pole tap-offs GV-G 0.0 A busbars GV-G GV-G7 0.0 tap-offs GV-G 0.08 GV-G 0.00 tap-offs GV-G GV-G GV-G tap-offs GV-G 0.00 Description Application Sold in Unit Weight lots of reference kg Protective end cover For unused busbar outlets GV-G Terminal blocks Connection from top For supply to one or more GV-G busbar sets GV-G Cover for terminal block For mounting in modular panels 0 LA9-E Padlocking device For use with up to padlocks GV-V0 0.0 (not supplied), Ø mm shank max. Accessories for LS-D (spring terminals) Description Application Sold in Reference Weight lots of kg Mounting plate LS-D and contactor LC-D09 to LAD D8 with front faces aligned Description Extension Number Reference Weight by of starters kg Power splitter box LAD-/ LAD- 0.0 A LAD LAD- 0.0 Description Composition of kit Reference Weight kg Assembly and power connection kit for LS-D and LC-D09...D LAD- plate for mounting LS-D LAD- power connection modules - between LS-D and power splitter box - between LS-D and contactor LAD Description Maximum capacity Application Sold in Reference Weight lots of kg Upstream mm Power supply of or power splitter terminal block boxes LAD-B 0. Downstream mm Connection of motor cables LAD terminal block Cable end reducer - For connection of conductors from to. mm 0 LAD-99 07_Ver.-EN.fm/

13 Dimensions, mounting Fuse carriers LS-D LS-D + LA8-D Mounting on rail AM-DP00 Mounting on panel Mounting on rail AM-DP00 Mounting of th pole On left-hand side On right-hand side ,, 8, 0,8,, x Ø 0 7 7, 7, GK-EK, EM, ES, ET, EV, EW, EX, EY Mounting on rail AM-DP00 Mounting on pre-slotted plate AM-P GK-E + GK-AV (padlocking device) 8 9, 9 0, 0, 8 a 7, 7, a 7, 8,, 98 a : with single-phase protection device. a : without single-phase protection device. External operator GK-AP0 right-hand, GK-AP0 left-hand Panel cut-out 70 GK- a a P P P P EK 88 EM ES 97 ET EV 0 EW External operator, right-hand or left-hand side f EX GK-EK, EM, ES, ET 9 EY GK-EV, EW, EX, EY 9 GK-Fp + GK-AP07 (internal right-hand control) Mounting on rail AM-DE or ED 70 0 Mounting on pre-slotted plate AM-PA a AF-EA f /0 a a GK-Fp P P P P a a 8 7, a () 8 a Internal or external control GK-AP07 right-hand, GK-AP08 left-hand () Padlocking device (up to padlocks) Panel cut-out (for external control) GK- a a P P P P FK FM FS FT 7 FV FW External operator, right-hand or left-hand side f FX 8 GK-FK, FM, FS, FT FY 7 GK-FV, FW, FX, FY = = = = 8, = =, 0 f 8 0 Selection: page 0/ Characteristics: page 0/ References: pages 07/ and 07/ Schemes: page 08/ 08-EN_Ver.0.fm/

14 Schemes Fuse carriers Fuse carriers without single-phase protection device -pole LS-D, D LS-D, D + GV-AEp LS-D, D + GV-AE0p GK-EK -pole GK-ES GK-FK GK-FS LS-D + LA8-D -pole + Neutral GK-EM GK-ET GK-FM GK-FT Fuse carriers with single-phase protection device -pole GK-EV GK-EW GK-FV GK-FW -pole + Neutral GK-EY GK-EX GK-FY GK-FX N N N N N N N N 8 7 Selection: page 0/ Characteristics: page 0/ References: pages 07/ and 07/ Dimensions: page 08/ 08-EN_Ver.0.fm/

15 Selection guide Switch-disconnector-fuses, to 0 A Applications GS switch-disconnector fuses provide on-load breaking and making, safe isolation and overcurrent They are used, in particular, on the incoming supply for control panels, for protecting and switching off main They provide simultaneous disconnection, together with all the other associated functions such as padlocking Their compact design means that they can also be fitted in small automation system equipment to provide Fuse type NF C or DIN Rated thermal current (Ith)) A 0 A A 00 A A 0 A 0 A 00 A 0 A 0 A Number of poles or + Nc Fuse size 0 x 8 x T000 x 8 x 8 T0 T T T T T00 T00 Internal operator, Front Side Side or front packlockable External operator, Side or front Side or front padlockable and lockable Rated operational voltage (Ue) 90 V Rated operational current (Ie) A 0 A A 00 A A 0 A 0 A 00 A 0 A 0 A at 00 V, AC-A Rated breaking capacity A 00 A 00 A 800 A 000 A 80 A 000 A 00 A 00 A at 00 V, AC-B Rated making capacity 0 A 00 A 0 A 000 A 0 A 00 A 00 A 000 A 00 A 00 at 00 V, AC-B Rated rms conditional short circuit current 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka 00 ka at 00 V, with gg (gl) fuses Switch-disconnector-fuse type references GS- DD GS- GS- GS- GS- GS- GS- GS- GS- or KK or LL QQ GS- Pages 0/ and 0/ 0Q_Ver.0-EN.fm/

16 protection. circuits (including emergency stop). and interlocking.. disconnect and protection functions on the incoming supply of equipment, generators, starters or motors BS A A 00 A 0 A 00 A 0 A A 00 A 0 A 800 A 0 A A A-A A Ø mm A-B-B B-B B...B B...B B...B C-C C...C D Front Side Side or front Side or front Side or front A A 00 A 0 A 00 A 0 A A 00 A 0 A 800 A 000 A A 00 A 800 A 80 A 00 A 000 A 0 A 00 A 00 A 00 A A 0 A 0 A 000 A 00 A 000 A 00 A 0 A 000 A 00 A 8000 A 8000 A 00 ka 00 ka 00 ka 80 ka 00 ka 80 ka 80 ka 80 ka 00 ka 00 ka 00 ka GS- GS-GB GS-JB GS-LB GS- GS-NB GS- GS-QQB GS-SB GS-TB GS-VB or LLB 0/ 0Q_Ver.0-EN.fm/

17 General Switch-disconnector-fuses, to 0 A Functions Breaking p Quick break and quick tripping mechanism. p Breaking mechanism independent of fuses. p Utilisation categories AC-/90 V and DC-/00 V. Isolation p Upstream and downstream breaking of fuses. up to 0 A : NFC/DIN, up to 800 A : BS upstream breaking of fuses for 0 A. p GS-AN auxiliary contacts. p Contacts forced open in the event of welding. p Visible isolation distance between the open contacts. Protection p Addition of gg (gl) fuses. p Addition of am fuses (associated with thermal overload relays). p Addition of quick-blow fuses. p Blown fuse detection device. p Conditional short-circuit withstand voltage of 00 ka for all ratings. p Handles with padlocking facility. p Interlocking of handles by means of lock. p Door interlock in I position. p Fuse covers fitted as standard on all ratings. p IPXXB terminal blocks fitted as standard up to A, available as an option on other ratings. Information and testing p Up to 0 auxiliary contacts. p Test facility with auxiliary contacts GS-ANT and handles GS-AHT. Product overview NF C and DIN fuses BS fuses Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Dimensions : pages 0/ to 0/ Schemes : page 0/ 0-EN_Ver..fm/

18 - Opening and closing independent of operator speed. - Quality and durability of mechanical and electrical lives. - On-load making and breaking of resistive, inductive or mixed resistive and inductive circuits. - Durable performance in severe duty applications. - Direct switching of motors. - Double break isolation of the power circuit and safe replacement of fuses. - Total isolation of power and control circuits to ensure safety of persons and equipment. - Control circuit isolation. - Fully apparent break (up to A rating). Open position cannot be indicated unless all contacts are actually open. - Visible break (00 to 0 A ratings). - Safe opening and clear indication of Open state of switch-disconnector - Type coordination (Iq > 0 ka) for motor starters consisting of fuses, contactor, relay. - Protection of distribution circuits and power switching circuits without significant current peak. - Protection of motors. - Protection of electronic variable speed controllers and soft starters. - Protection against single-phasing. - Equivalence between the breaking capacity of the fuses and the ability of the switch-disconnector-fuse to withstand this maximum capacity. - Use in installations where very high short-circuit currents can develop. - Protection against accidental contact. - Protection of persons. - Early break, Open and Closed position signalling, and blown fuse signalling - Use in automation systems. Accessories Handles - Internal or external. - Mounted on right-hand side. - Mounted on left-hand side. - Mounted on front with door interlock. - Padlockable with up to padlocks. - Lockable. - Black / Black or Yellow / Red. Contacts - Addition of up to 8 auxiliary contacts GS-AN suitable for isolation. Reversibility of these contacts to convert an N/C contact into an N/O contact and vice versa. - Control circuit test facility with auxiliary contacts GS-ANT used in conjunction with handles GS-AHT. - Two auxiliary early break and O and I position signalling contacts. - Auxiliary blown fuse signalling contacts.. 0-EN_Ver..fm/

19 Characteristics Switch-disconnector-fuses, to 0 A for use with NF C and DIN fuses Type GS-DD GS-F GS-G GS-J Environment Conforming to standards Switch-disconnector-fuses IEC 097- and, NF C -0, VDE 00, NBN 08 Circuit breakers IEC 9- and, NFC -0 and -, VDE 0-, DIN 0 Product certifications Protective treatment ASEFA/LOVAG, KEMA, pending: LROS, CEBEC TH Fire resistance Body C conforming to IEC 9-- Fuse cover C 80 Pole characteristics Rated thermal current at 0 C (Ith) A 0 00 Fuse size 0 x 8 x T000 x 8 Rated insulation voltage (Ui) V Rated impulse withstand kv voltage (Uimp) Rated operational power Cat. AC-A/B () " 00 V kw 00 V kw 8, () 7 90 V kw () 90 Rated operational current (Ie) Cat. AC-A/B () " 00 V A V A () V A () 0 00 Cat. DC-A/B () $ 00 V () A Short-circuit withstand I rms with protection by gg (gl) fuses ka Short-circuit making capacity I rms with protection by gg (gl) fuses ka Fuse ratings A 0 00 Rated breaking capacity I rms at 00 V Cat. AC-B A making capacity A Mechanical durability Number of operating cycles Electrical durability Number of op. cycles Cat. AC/DC-A/B () 00/ Cabling Cable c.s.a. min/max mm./ / 0/ /9 Bars min c.s.a. / max width mm Tightening torque N.m.. GS-AMS/ and GS-AM to AM early break and signalling contact characteristics Rated thermal current at 0 C (Ith) A Rated operational current (Ie) Cat. AC- A 7 V : ; 0 V : ; 00 / V : ; 0 V : Cat. DC- A V : ; 8 V : ; 0 V : 0.; 0 V : 0. Durability Number of operating cycles Mechanical : ; electrical Cat. AC- : Fuse protection gg A A max Cabling mm Faston connector : x. or x.8 GS-AN and GS-ANT signalling contact characteristics () Rated thermal current at 0 C (Ith) A 0 Rated operational voltage (Ie) Cat. AC- A 0 V : 0; 00/ V : 8; 0 V : Cat. DC- A 8 V : ; 0 V :.; 0 V : Durability Number of operating cycles Mechanical : 0 000; electrical Cat. AC- : Fuse protection gg A max Cabling Cable c.s.a. min/max mm Min :.; max : () Category A frequent operating cycles, category B infrequent operating cycles. () With tubular links () poles in series per phase. () Non utilisables sur GS-DD. General : page 0/ References : pages 0/ to 0/ Dimensions : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

20 GS-K GS-KK GS-L GS-LL GS-N GS-QQ GS-S GS-V IEC 97- and, NF C -0, VDE 00, NBN 08 IEC 9- and, NFC -0 and -, VDE 0-, DIN 0 ASEFA/LOVAG, KEMA, pending: LROS, CEBEC TH x 8 T00 T0 T00 T T T T / /9 9/00 00/ / / / /00 0/ /80 / / 00/0 800/ / / / /00 000/00 000/00 000/00 000/00 00/00 /9 /9 0/9 0/9 9/0 8/0 x 0 / x 00 / x 8 / x 0 x / x 0 x / 00 7 V : ; 0 V : ; 00 / V : ; 0 V : V : ; 8 V : ; 0 V : 0.; 0 V : 0. Mechanical : ; electrical Cat. AC- : A max Faston connectors : x. or x V : 0; 00 / V : 8; 0 V : 8 V : ; 0 V :.; 0 V : Mechanical : 0 000; electrical Cat. AC- : A max Min :.; max : 0_Ver.-EN.fm/

21 Characteristics Switch-disconnector-fuses, to 0 A for use with BS fuses Type GS-DDB GS-GB GS-JB Environment Conforming to standards Switch-disconnector-fuses IEC 97- and, NF C -0, VDE 00, NBN 08 Circuit breakers IEC 9- and, NFC -0 and -, VDE 0-, DIN 0 Product certifications Protective treatment ASEFA/LOVAG, KEMA, pending: LROS TH Fire resistance Body C 90 conforming to IEC 9-- Fuse cover C 80 Pole characteristics Rated thermal current at 0 C (Ith) A 00 Fuse size A A-A A Ø mm Rated insulation voltage (Ui) V Rated impulse withstand kv voltage (Uimp) Rated operational power Cat. AC-A/B () " 00 V kw 0 00 V kw V kw 90 Rated operational current (Ie) Cat. AC-A/B () " 00 V A V A V A 00 Cat. DC-A/B () $ 00 V () A Short-circuit withstand I rms with protection by gg (gl) fuses BS ka Short-circuit making capacity I rms with protection by gg (gl) fuses BS ka Fuse ratings A 00 Rated breaking capacity I rms at 00 V Cat. AC-B A making capacity A Mechanical durability Number of operating cycles Electrical durability Number of op. cycles Cat. AC/DC-A/B () 00/00 00/00 00/00 Cabling Cable c.s.a. min/max mm./ 0/ /9 Bars min c.s.a. / max width mm Tightening torque N.m. GS-AM/ and GS-AM to AM early break and signalling contact characteristics Rated thermal current at 0 C (Ith) A Rated operational current (Ie) Cat. AC- A 7 V : ; 0 V : ; 00 / V : ; 0 V : Cat. DC- A V : ; 8 V : ; 0 V : 0.; 0 V : 0. Durability Number of operating cycles Mechanical : ; electrical Cat. AC- : Fuse protection gg A max Cabling mm Faston connectors : x. or x.8 GS-AN and GS-ANT signalling contact characteristics Rated thermal current at 0 C (Ith) A 0 Rated operational current (Ie) Cat. AC- A 0 V : 0; 00/ V : 8; 0 V : Cat. DC- A 8 V : ; 0 V :.; 0 V : Durability Number of operating cycles Mechanical : 0 000; electrical Cat. AC- : Fuse protection gg A max Cabling Cable c.s.a. min / max mm Min :.; max : () Category A frequent operating cycles, category B infrequent operating cycles. () poles in series per phase. General : page 0/ References : pages 0/ to 0/ Dimensions : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

22 GS-LB/LLB () GS-MMB GS-NB GS-PB GS-QQB GS-SB GS-TB GS-VB IEC 97- and, NF C -0, VDE 00, NBN 08 IEC 9- and, NFC -0 and -, VDE 0-, DIN 0 ASEFA/LOVAG, KEMA, pending: LROS TH A, B-B () B-B B...B B...B B...B C-C C...C D /9 9/00 00/ / /00 0/ / 00/ / / /00 000/00 000/00 000/00 000/00 000/00 00/00 00/00 0/9 0/9 9/0 9/0 8/0 x 0 / x 00 / x 8 / 0 x 0 x / x 0 x / x 0 x / 00 7 V : ; 0 V : ; 00 / V : ; 0 V : V : ; 8 V : ; 0 V : 0.; 0 V : 0. Mechanical : ; electrical Cat. AC- : A max Faston connectors : x. or x V : 0; 00 / V : 8; 0 V : 8 V : ; 0 V :.; 0 V : Mechanical : 0 000; electrical Cat. AC- : A max Min :.; max : () Fit switch-disconnector-fuses with B or B type fuses for GS-LB and A type fuses for GS-LLB. 0_Ver.-EN.fm/

23 References Switch-disconnector-fuses, to 0 A for use with NF C or DIN fuses Switch-disconnector-fuse switch bodies for use with NF C or DIN fuses 09_ Switch Fuse Number of Reference Weight rating size poles A kg For external operators mounted on RH or LH side, and internal or external front-mounted operators 0 x 8 GS-DD 0.0 GS-DD + N () GS-DD 0.0 For internal or external operators mounted on right-hand side 0 x GS-FD GS-FD Size 000 () GS-GD.00 GS-GD x 8 GS-JD.700 GS-JD.00 GS-FD x 8 GS-KD.700 GS-KD.00 Size 00 GS-KKD.700 GS-KKD.00 0 Size 0 GS-LD.00 GS-LD Size 00 GS-LLD.700 GS-LLD.00 0 Size GS-ND.00 GS-ND Size GS-QQD.700 GS-QQD.00 GS-ND 0 Size GS-SD.00 GS-SD Size GS-VD 7.00 GS-VD.00 For external operators mounted on left-hand side 0 x GS-FG GS-FG.00 Size 000 () GS-GG.00 GS-GG x 8 GS-JG.700 GS-JG.00 x 8 GS-KG.700 GS-KG Size 00 GS-KKG.700 GS-KKG.00 0 Size 0 GS-LG.00 GS-LG.800 Size 00 GS-LLG.700 GS-LLG.00 GS-KKG 0 Size GS-NG.00 GS-NG Size GS-QQG.700 GS-QQG.00 () N = Switched neutral. () Compact fuses for German market. General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/

24 References Switch-disconnector-fuses, 0 to 0 A for use with NF C or DIN fuses Switch-disconnector-fuse switch bodies for use with NF C or DIN fuses Switch Fuse Number of Reference Weight rating size poles A kg 88 For external operators mounted on front 0 x GS-F.00 GS-F.00 Size 000 () GS-G.00 GS-K GS-G x 8 GS-J.000 GS-J.00 x 8 GS-K.000 GS-K.00 Size 00 GS-KK.000 GS-KK.00 0 Size 0 GS-L.00 GS-L.00 Size 00 GS-LL.000 GS-LL.00 0 Size GS-N.800 GS-N Size GS-QQ.00 GS-QQ.800 For internal and external operators mounted on front 0 Size GS-S.00 GS-S Size GS-V 7.00 () Compact fuses for German market. GS-V.00 General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/

25 References (continued) n Switch-disconnector-fuses, to 0 A for use with BS fuses Switch-disconnector-fuse switch bodies for use with BS fuses 087 Switch Fuse Number of Reference Weight rating size poles A kg For external operators mounted on RH or LH side, and internal or external front-mounted operators A GS-DDB N () GS-DDB 0.0 For internal or external operators mounted on right-hand side A-A GS-GBR.00 GS-GBR.00 GS-DDB 00 A Ø mm GS-JBR.700 GS-JBR.00 0 A GS-LLBR.00 GS-LLBR.900 B-B GS-LBR.00 GS-LBR B-B GS-MMBR.00 GS-MMBR B...B GS-NBR.00 GS-NBR.00 B...B GS-PPBR.00 GS-PPBR B...B GS-QQBR.700 GS-QQBR.00 GS-NBR 0 C-C GS-SBR 7.00 GS-SBR C...C GS-TBR N GS-TBR.00 0 D GS-VBR 7.00 GS-VBR.00 For external operators mounted on front A GS-DB.00 GS-DB A-A GS-GB.00 GS-GB A Ø mm GS-JB.000 GS-JB.00 GS-GB 0 A GS-LLB.00 GS-LLB.900 B-B GS-LB.00 GS-LB B-B GS-MMB.00 GS-MMB.00 0 B...B GS-NB.800 GS-NB.800 B...B GS-PPB.800 GS-PPB B...B GS-QQB.00 GS-QQB.800 For internal or external operators mounted on front 0 C-C GS-SB 7.00 GS-SB C...C GS-TB N GS-TB.00 General: page 0/ 0_Ver.0-EN.fm/ 0 D GS-VB 7.00 GS-VB.00 () N = Switched neutral. Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7

26 References Switch-disconnector-fuses, to 0 A Auxiliary and signalling contacts Auxiliary early break and/or O and I position signalling contacts 00_ Switch Type of Mounting Reference Weight rating contact A kg N/O Front () GS-AM0 0.0 N/C Front () GS-AM0 0.0 C/O Side () GS-AM 0.00 GS-AM// C/O Side () GS-AM Auxiliary early break and O and I position signalling contacts Switch Type of Reference Weight rating contact A kg C/O GS-AM _ C/O GS-AM C/O GS-AM C/O GS-AM 0.00 Auxiliary O and I position signalling contacts () Standard contacts 88 GS-AM/ N/C + N/O GS-AN () 0.00 N/C + N/O GS-AN () 0.00 Contacts with test facility () N/C + N/O GS-ANT 0.00 N/C + N/O GS-ANT 0.00 Auxiliary blown fuse signalling contacts for use with NF C and DIN fuses () Type of Switch Fuse Number of Reference Weight contact rating size poles A kg st C/O 0 x GS-AF 0.00 GS-AF and x 8 GS-AF 0.00 GS-AF GS-AM 0 T0 GS-AF 0.00 GS-AF and 00 T and T GS-AF 0.00 GS-AF T GS-AF GS-AF T GS-AF GS-AF nd C/O GS-AF 0.00 GS-AF 0.00 GS-AN/ GS-AFF 0.00 GS-AFF 0.00 () For use with external operator, front or side-mounted. () For use only with internal, front-mounted operator. () Reversible add-on attachments for converting an N/C contact to an N/O contact and vice versa. () For switch-disconnector-fuses with external operator mounted on left-hand side, add suffix G to the reference. Example : GS-ANG. () Provides Test function only with handles GS-AHT///. () BS fuses are not available with striker. General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/

27 00_ () See page 0/0 0_Ver.0-EN.fm/

28 References Switch-disconnector-fuses, to 0 A Side-mounted operators Side-mounted operators Switch Type of Colour Reference Weight rating operator handle/front plate A kg Handles for internal operators mounted on right-hand side, padlockable 0 and Black/ GS-AH Black/ GS-AH Lockable() Black/ GS-AH in position O Handles for external operators mounted on right-hand side, padlockable, IP Black/Black GS-AH0 0.0 Red/Yellow GS-AH and Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH Lockable Black/Black GS-AH () or () in position O Red/Yellow GS-AH Handles for external operators mounted on left-hand side, padlockable, IP () Black/Black GS-AH 0.0 Red/Yellow GS-AH and Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH0 0.0 General: page 0/ () Lockable with device GS-AX to be ordered separately. () Lockable with device GS-AX to be ordered separately. () Lockable with device GS-AX to be ordered separately. () For switch-disconnector-fuses with NF C and DIN fuses. Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/7

29 00_ () See page 0/0 0_Ver.0-EN.fm/8

30 References Switch-disconnector-fuses, to 0 A Front-mounted operators Front-mounted operators Switch Type of Colour Reference Weight rating operator handle/front plate A kg Handles for internal operators, mounted on front, padlockable Black/ GS-AH Lockable Black/ GS-AH () or () in position O Handles for external operators, mounted on front, padlockable, IP. Door interlock in I position () Black/Black GS-AH0 0.0 Red/Yellow GS-AH and Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH Lockable () Black/Black GS-AH0 0.0 in position O Red/Yellow GS-AH Lockable () Black/Black GS-AH in position O Red/Yellow GS-AH Handles for external operators, mounted on front, padlockable, with test facility IP. Door interlock in I position () 0 and Lockable () Black/Black GS-AHT0 0.0 in position O Red/Yellow GS-AHT Lockable () Black/Black GS-AHT0 0.0 in position O black Red/Yellow GS-AHT0 0.0 () Lockable with device GS-AX to be ordered separately. () Lockable with device GS-AX to be ordered separately. () Lockable with device GS-AX to be ordered separately. () Door interlock can be overridden with a tool on ratings up to 00 A. General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/9

31 References Switch-disconnector-fuses, to 0 A Accessories Shaft extensions for external operators Switch Operator Cross Reference Weight rating Type Length section A mm mm kg Front 00 x GS-AE9 0.0 or sidemounted 0 00 Side x 0 GS-AE 0.00 mounted Front- 0 0 x 0 GS-AE 0.00 mounted Side- 00 x GS-AE 0.00 mounted Front- 00 x GS-AE 0.0 mounted Kits for handle locking devices 0000_ Switch Type of Key Reference Weight rating operator description A kg External Ronis ELAP GS-AX 0.00 Side or front-mounted Internal Ronis 0 GS-AX 0.00 or external Side or front-mounted GS-AX// Internal Ronis ELAP GS-AX 0.00 Front-mounted Cage terminals for connection of bare cables (without lug) Switch Number of Reference Weight rating poles A kg GS-AW GS-AW GS-AW 0.0 GS-AW 0.07 General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/0

32 References Switch-disconnector-fuses, to 0 A Accessories Terminal protection shrouds for upstream or downstream connector plates Switch Number of Reference Weight rating poles A kg 0 and or () GS-AP 0.00 GS-AP GS-AP 0.0 GS-AP GS-AP 0.00 GS-AP 0.00 Terminal protection shrouds for upstream connector plates 800 GS-AP GS-AP GS-AP Fuse cover locking devices () GS-AP Switch Fuse Number of Reference Weight rating size poles A kg 0 x and A or () T00C and A-A or GS-AV x 8, T00 and A or GS-AV T0 GS-AV 0.00 GS-AV 0.00 B-B GS-AV 0.0 GS-AV T GS-AV 0.00 GS-AV 0.00 B...B GS-AV 0.80 GS-AV T and B...B GS-AV GS-AV7 0.0 () Fitted as standard on these switch-disconnector-fuses. () For switch-disconnector-fuses fitted with internal or external operators mounted on right-hand side. General: page 0/ Characteristics: pages 0/ to 0/ Dimensions: pages 0/ to 0/ Schemes: page 0/7 0_Ver.0-EN.fm/

33 Dimensions Switch-disconnector-fuses, to 0 A Switch-disconnector-fuses GS-DD ( A) Frontal internal control , 98 fix. 79, 9 8,,, 7 Switch-disconnector-fuses GS-DD ( A) Frontal external control Accessories GS-AM/, 0 mini 0 () () 7, Ø 8 O 90 () With or GS-AM// () With or GS-AM// External RH side-mounted operator I I GS-AM// mini, 9 90 Ø = = O Door cut-out For external front-mounted and LH side-mounted operator 9 For external RH side-mounted operator I Ø, Ø Ø, 90 Ø, Ø Ø, 0 O O,7 0,7 90 I Fixing by Ø mm screws Fixing by M nut Fixing by Ø mm screws Fixing by M nut General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

34 Dimensions Switch-disconnector-fuses, to 0 A Switch-disconnector-fuses GS-F (0 A), G and GB ( A) Switch-disconnector-fuses GS-J or JB (00 A), K ( A) Lateral internal control Lateral internal control = c 0 0, P P Fixing = 0, 7 () 8 8 Fixing 0 0 = J G a J , 70 () (), 70, 0 = 8 a c G J J P GS-F P () P GS-G P 9, P, GS-GB P 9 9, () Terminal cover P 9, () P : 8, P : 8 Switch-disconnector-fuses GS-F (0 A), G and GB ( A) Switch-disconnector-fuses GS-J or JB (00 A), K ( A) Lateral external control Lateral external control Fixing Fixing () 70 7, () 70 () GS-F : min 0, max 8. GS-G and GB : min, max 7. Without axis extension.. () Min 9, max 77, without axis extension. Switch-disconnector-fuses GS-F (0 A), G and GB ( A) Switch-disconnector-fuses GS-J or JB (00 A), K ( A) Frontal external control Frontal external control Fixing 70 (),, Fixing, 7 () GS-F : min 9, max ; GS-G : min, max GS-GB : min 00, max.() GS-F : 7, ; GS-G and GB :, () Min, max Switch-disconnector-fuses GS Lateral and frontal external control Drill holes on the door General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

35 Dimensions Switch-disconnector-fuses, to 0 A GS-KK ( A), L, LL, LB and LLB (0 A) Lateral internal control GS-MMB (00 A), N or NB (0 A), PPB ( A) and QQ (00 A) Lateral internal control 7 c () P P Fixing c () P P Fixing H 9, J G a J GS-L = 7 GS-KK/LL = 70, GS-KK/LL = 89 GS-L = 9 () () 70 (),, GS-N = GS-QQ = 0 () 70 () Min, max. Without axis extension. GS-MMB (00 A), N or NB (0 A), PPB ( A) and QQ (00 A) Frontal external control Fixing 70 () (),,, H b 7 b 9, 7 7 J G a J a c G H J J P GS-L P 90, P 0, a b b c G H J J P GS-KK, LL P 8, GS-MMB, N, NBP P 8, P GS-LB, LLB P GS-QQ, PPB P P P () Terminal cover () Terminal cover GS-KK ( A), L, LL, LB and LLB (0 A) GS-MMB (00 A), N or NB (0 A), PPB ( A) and QQ (00 A) Lateral external control Lateral external control Fixing Fixing () GS-KK or LL : min 9, max 77. GS-L, LB, LLB, MB : min 8, max 9. Without axis extension. GS-KK ( A), L, LL, LB and LLB (0 A) Frontal external control Fixing GS-N =8 GS-QQ = 00 () GS-KK, LL : min, max. GS-L : min, max GS-LB, LLB : min 0, max () GS-MMB, N (P) : 90, GS-MMB, N (P) :, GS-PPB, QQ : () GS-KK, L and LL :,. GS-LB, LLB : 80, () Min, max General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

36 Dimensions (continued) Switch-disconnector-fuses, to 0 A Switch-disconnector-fuses GS-S (0 A) and GS-TB (800 A) Lateral internal control Lateral external control 90 79, 0 a J 0 7 () () b M 0 b 8 0 M 0 R, a a a b b J M R GS-S P,, , 0, P 0,, , 0, GS-TB P,, 0 9, 0, P 0,, 0 99, 0, () Terminal cover () Without axis extension. Minimum length with axis extension f + 7 Switch-disconnector-fuses GS-V (0 A) Lateral internal control Lateral external control 90 89, 7 0 a G 7 0 () a () 9 a a G GS-V P 7 P 7 () Screen for protecting the plates () Without axis extension. Minimum length with axis extension : f + 7 Switch-disconnector-fuses GS-S (0 A), and GS-V (0 A) Switch-disconnector-fuses GS-V (0 A) Lateral internal control Connector plate Drill holes on the door = = () () upstream plate : 80, downstream plate : General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

37 Dimensions Switch-disconnector-fuses, to 0 A Switch-disconnector-fuses GS-S (0 A) and GS-TB (800 A) Frontal internal control Frontal external control 8 () 0 a J 0 7 8, b M 0 b 8 M M () 7 () R a R a a b b J M M R R GS-S P 70, , 0 0,, P 0, , 0 0,, GS-TB P 70, 0 9, 7, P 0, 0 99, 7, () Terminal cover () Without axis extension. Minimum length with axis extension : f + 7. () f min : shortened axis. Switch-disconnector-fuses GS-V (0 A) Frontal internal control Frontal external control a G 7 0 8, () () a 8, a a G () Protective front screen (original) GS-V P 7 () Without axis extension. Minimum length with axis extension : f + 7 P 8 7 Note : For external control, Switch-disconnector-fuses GS-S (0 A) and GS-V (0 A), see page 0/ for the drill holes on the door and the connector plate. General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Schemes : page 0/7 0_Ver.-EN.fm/

38 Schemes Switch-disconnector-fuses, to 0 A -pole GS A 0 to 0 A -pole GS A 0 to 0 A Auxiliary signalling contacts GS-AM0 GS-AM0 GS-AM GS-AM GS-AF C/O N/C + N/O /T /T /T 8/T /T /T /T 8/T /L /L /L 7/L /L /L /L 7/L /T /T /T /T /T /T /L /L /L /L /L /L General : page 0/ Characteristics : pages 0/ to 0/ References : pages 0/ to 0/ Dimensions : pages 0/ to 0/ 0_Ver.-EN.fm/7

39 References Cartridge fuses type am For protection of equipment with current peaks Fuse Maximum Rating Sold Fuses without striker Fuses with striker type rated in Unit Weight Unit Weight voltage lots of reference reference V A kg kg DF-CA/// DF-EA/// DF-EA// DF-FA// Cylindrical " 00 0 DF-BA x. 0 DF-BA DF-BA DF-BA DF-BA DF-BA Cylindrical " DF-CA x DF-CA DF-CA DF-CA DF-CA DF-CA DF-CA DF-CA DF-CA DF-CA DF-CA 0.00 " DF-CA DF-CA DF-CA 0.00 Cylindrical " DF-EA x DF-EA " 00 0 DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA DF-EA 0.00 DF-EA DF-EA 0.00 DF-EA DF-EA DF-EA DF-EA 0.00 DF-EA DF-EA 0.00 DF-EA DF-EA DF-EA " DF-EA DF-EA DF-FA// Cylindrical " 90 0 DF-FA0 0.0 DF-FA0 0.0 x 8 0 DF-FA0 0.0 DF-FA DF-FA DF-FA DF-FA0 0.0 DF-FA DF-FA 0.0 DF-FA DF-FA0 0.0 DF-FA DF-FA 0.0 DF-FA DF-FA 0.0 DF-FA DF-FA0 0.0 DF-FA DF-FA0 0.0 DF-FA0 0.0 " 00 0 DF-FA 0.0 DF-FA DF-FA DF-FA DF-FA DF-FA " 00 0 DF-FA 0.0 DF-FA 0.0 0_Ver.0-EN.fm/

40 References Cartridge fuses type am For protection of equipment with current peaks Fuse Maximum Rating Sold Fuses without striker Fuses with striker type rated in Unit Weight Unit Weight voltage lots of reference reference V A kg kg DF-GA//// Blade " 00 DF-FGA 0.0 size 00 0 DF-FGA0 0.0 DF-FGA 0.0 DF-FGA DF-FGA DF-FGA0 0.0 DF-FGA DF-FGA DF-FGA " 00 DF-FGA 0.0 DF-GA//// Blade " 00 0 DF-GA0 0.0 size 0 DF-GA DF-GA DF-GA0 0.0 DF-GA 0.0 DF-GA DF-GA 0.0 DF-GA DF-GA0 0.0 DF-GA0 0.0 Blade " 00 0 DF-HA 0.00 size 00 DF-HA DF-HA DF-HA 0.00 DF-HA 0.00 DF-HA 0.00 DF-HA 0.00 Blade " 00 0 DF-JA 0.0 size DF-JA 0.0 DF-JA DF-JA0 0.0 DF-JA DF-JA0 0.0 DF-JA0 0.0 DF-JA//// Blade " DF-KA size 00 DF-KA DF-KA DF-KA 0.80 DF-KA 0.80 Blade " 00 0 DF-LA.900 DF-LA.900 size 800 DF-LA DF-LA DF-LA0.900 DF-LA0.900 " 00 0 DF-LA.900 DF-LA.900 0_Ver.0-EN.fm/

41 References Cartridge fuses type gg For protection of equipment with current peaks Fuse Maximum Rating Sold Fuses without striker Fuses with striker type rated in Unit Weight Unit Weight voltage lots of reference reference V A kg kg DF-CN// DF-EN// DF-EN// DF-FN// DF-FN// Cylindrical " 00 0 DF-BN x. 0 DF-BN DF-BN DF-BN DF-BN DF-BN DF-BN DF-BN DF-BN Cylindrical " 00 0 DF-CN x 8 0 DF-CN DF-CN DF-CN DF-CN DF-CN DF-CN DF-CN " 00 0 DF-CN DF-CN 0.00 Cylindrical " 00 0 DF-EN DF-EN x 0 DF-EN DF-EN DF-EN DF-EN DF-EN 0.00 DF-EN DF-EN DF-EN DF-EN 0.00 DF-EN DF-EN 0.00 DF-EN DF-EN DF-EN DF-EN0 0,00 Cylindrical " DF-FN0 0.0 DF-FN0 0.0 x DF-FN0 0.0 DF-FN DF-FN 0.0 DF-FN DF-FN 0.0 DF-FN DF-FN0 0.0 DF-FN DF-FN0 0.0 DF-FN0 0.0 " 00 0 DF-FN 0.0 DF-FN DF-FN DF-FN DF-FN DF-FN _Ver.0-EN.fm/

42 References Cartridge fuses type gg For protection of equipment with current peaks Fuse Maximum Rating Sold Fuses without striker Fuses with striker type rated in Unit Weight Unit Weight voltage lots of reference reference V A kg kg DF-GN//// DF-GN//// Blade " DF-FGN0 0,0 size 00 0 DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN DF-FGN0 0.0 Blade " 00 0 DF-GN0 0.0 size 0 DF-GN DF-GN DF-GN0 0.0 DF-GN 0.0 DF-GN DF-GN 0.0 DF-GN 0.0 Blade " 00 0 DF-HN 0.00 size 00 DF-HN DF-HN DF-HN 0.00 DF-HN 0.00 Blade " 00 0 DF-JN 0.0 size DF-JN 0.0 DF-JN DF-JN0 0.0 DF-JN0 0.0 Blade " DF-KN DF-KN size 0 DF-KN 0.80 DF-KN 0.80 DF-JN//// Blade " DF-LN DF-LN size 000 DF-LN0.900 DF-LN DF-LN.900 DF-LN.900 0_Ver.0-EN.fm/