Set Up Your Print. Overview. The main interface has five components: 1. 3D Viewer

Size: px
Start display at page:

Download "Set Up Your Print. Overview. The main interface has five components: 1. 3D Viewer"

Transcription

1 Set Up Your Print Overview Open Uniz Desktop and click Control Bu on to show the 3D model viewer. The main interface has five components: 1. 3D Viewer 1/23

2 2. Main Tools Load 3D Model Move Selected Model Rotate Selected Model Scale Selected Model Generate Supports Slice Upload slice 3. Additional Tools New Scence Save Scence Save Scence as Advanced Se ng Undo Opera on 2/23

3 Redo Opera on 4. Printer Control The Printer Control icon will not be present un l your printer is connected to your computer. Once connected, click on the Printer Control Bu on to control the printer. When mul ple printers are connected, mul ple icons will show up to control the corresponding printers. 5. Status bar The status bar appears along the lower edge of the window and shows so ware progress, such as the loading, genera ng support, and slicing progresses. How to start prin ng Once the printer hardware is set up, make sure the power is plugged in and printer is turned on, and connected to your computer via USB. Load 3D Model To load one or more 3D models, you may either drag-and-drop into the 3D viewer, click Load File Bu on from the Main Tools, or double click on the file directly (if Uniz Desktop is set as default so ware to open such file format).file format supported: Uniz: STL, OBJ and UNIZ. Uniz+: STL, OBJ, AMF, 3MF and UNIZ. Select Object(s) Clicking le mouse bu on on an object to ac vate it for further opera ons. Drag the pointer across objects to select mul ple objects. The ac vated objects will turn blue once selected. 3/23

4 Change View Viewing your model from preferred angle will benefit model posi oning. To rotate the view, right click and drag around the ac vated object. To pan, hold the shi key and click-drag with right mouse or holding scroll wheel and move mouse around. To zoom in or out, use the scroll wheel. Change Position Pressing the Move Bu on will open following sub menu. Once the Posi on tab is open, hold the le mouse bu on on the object and move the mouse to move the object freely in the X-Y plane. If the Shi key is held down, the object will be moved up and down along the Z-axis instead. The ac vated object can also be moved by inpu Enter to apply changes. ng X/Y/Z values in the field, press Bring ac ve part in contact with pla orm. Center ac ve part on pla orm. Duplicate ac ve part. 4/23

5 TIP Make sure the models are distributed evenly on build pla orm. Un-balanced forces on the build pla orm may result in inferior precision or cracking. Change Orientation Press the Rotate Bu on on the main tools will open following sub menu. 5/23

6 Once the Rota on tab is open, hold the le mouse bu on on the object and move the mouse to freely rotate the object. Rotate any model more precisely in one of the three main axes by dragging one of the circular rings on the manipulator. The ac vated object can also be rotated by inpu ng X/Y/Z values in the field. Press Enter to apply changes. Uniz's orienta on tools are rela ve, not absolute,so the X, Y, and Z rota on angles reset to 0 degrees a er applying a rota on. Press "To Align Bo om Plane " bu on to align the selected plane to the bo om of build pla orm. Click the Reset Bu on to restore the ac vated object to the original status. 6/23

7 TIP Large Flat surfaces or Long Straight line with supports may be printed at oblique angle of at least 10º to the build pla orm for higher success rate. The forces during peeling may distort the extremely thin layer of a flat surface or a line mounted on the support structures if printed horizontally. If a planar surface or thin line is oriented at an oblique angle, there is only li le overhang for each new layer. Furthermore, thin-walled parts occupy significant less area in a slice when printed at an oblique angle. Change Size Press the Size Bu on on the main tools will open following sub menu. Once the Size tab is open, the ac vated object can be scaled freely by holding the le mouse bu on on the object and moving the mouse. The ac vated object can also be scaled by inpu ng X/Y/Z values in the field. Press Enter to apply changes. The object will scale uniform in Uniform Scaling 7/23

8 mode. And in Non-uniform Scaling mode it will scale for each axis without affec ng the other axes. If you prefer to scale to a fixed ra o put value in the Scale. Click the Reset Bu on to restore the ac vated object to the original size. TIP Change object s size will break generated supports. Note that Change size by modify scale value do not support mul -select. Generate Supports Most models need addi onal support structures to print successfully, especially those with overhangs. Press the Supports Bu on on the main tools to open the Supports sub menu. Once the Supports tab is open, supports can be added to the ac ve object by pressing the Generate bu on. Support parameters can be adjusted using spacing, Support Diameter, Head Length, and Point Size sliders. 8/23

9 Spacing defines the closest distance between two adjacent supports. Support Diameter defines the diameter of the support pillar. Head Length defines the length between the straight support pillar and angled pillar to the object (point). Point Size defines the diameter of the touching point on the object. Internal Supports, checking this box will generate supports inside the model to shore up overhangs. Without internal supports, the overhangs may fail during print. 9/23

10 10/23

11 Li, li s the ac vated object form the build pla orm up 5mm. Down, pushes the ac vated object down to the build pla orm. Generate, generates the support structure using the current se ngs for all selected models. Edit, allow manually add, modify, or delete support structures. Entry/Exit Manual Edit Press the Edit Bu on, the system entry manual edit support mode. Whether the model is selected or not, you can edit supports manually. Click the Edit Bu on again, the system will return to automa c support mode. Add Support Trace mouse cursor over the model, when your cursor appears as a green line, clicking on the surface of the model to add a support. If the cursor appears as a red line, it means there is no need to add a support. Modify Support Click on the surface of the support, it will be highlighted to indicate that it is being selected. Once selected, you can drag and drop it to target loca on. If the support turn red while moving, the current loca on is not recommended. You can also change the Support Diameter, Header Length, or Point Size sliders to modify support proper es. Delete Support Once a support is selected, press "DELETE " key to remove it. 11/23

12 TIP The Li, Down, Generate bu ons are only enable when a model is being selected and ac vated. Slice Press the Slice Bu on on the main tools will open two sub menus, the le menu is to start Slice and Show Slices, and the right drag bar and menu is for customiza on of slice profile. Slice Parameters This is customize the slice parameters of each segment of a model. Resin Type provides different default values for different resin type. Thickness is the layer thickness, which is related to Z resolu on. 12/23

13 Exposure Time is the exposure me of a layer in this segment, it may vary due to different layer thickness se ng or different resin types. Cool Down Time is the me to cool down the exposed layer to protect the polymer film from overhea ng. For sustained low peel force and prolonged film life, it is recommended to keep the film temperature below 50deg C. Overhea ng will cause the film to warp, delaminate, or even break. Tip: Avoid exposing the same spot or area over and over, try to orient the model s walls or pillars in oblique angle so the exposure area changes every next layer. Pressing the "Advanced" Bu on will open following sub menu 13/23

14 Motor Speed defines the speed of electric motor that controls the peel mo on of the pla orm. Rise Height defines the travel height of the peel mo on. Hollowing hollows segment of the object. The Wall Thickness can be changed at Wall Thickness of Hollowing in Advanced Se ng. This works only with simple slice geometries, and the object must be thicker than twice the Wall Thickness. 14/23

15 Pause sets a pre-set pause at the layer of choice during prin ng, the pause can be resumed a er pressing the Resume Bu on in the prin ng control tab. Customize Your Own Z Resolution Dividing the model into mul ple segments and define different slice parameters, Z resolu on customiza on can be used to balance print speed and surface quality. Click the block on the slider bar to start customizing print parameters. The white line shows the division layer of the two adjacent segments. The upper menu sets the segment above the division, and the lower menu sets the segment below. You may drag the slider block to change the division loca on or double click on blank space on the slider bar to add another division layer. Press Delete key when dragging the slider block to erase the division layer. The last division layer cannot be deleted. Slice Tools 15/23

16 Click Slice Bu on to slice all models on the build pla orm with the defined parameters. The es mated print informa on will show in the status bar. Click Show Slices Bu on to check slice of any sliced layer. If Print When Finished is checked, the sliced data will be sent to the selected printer in the right bar automa cally, you s ll need to touch the front bu on on the printer to confirm the print job to start prin ng. TIP "Print When Finished" will only be enabled when a printer is connected, the corresponding Printer Control Panel is open, and the printer is in ready status. 16/23

17 Print Once a printer is connected to your computer, a circle bu on will show up on the right toolbar. Print Tools Press the printer icon to open the Printer Control Panel. The Printer Control Panel is used to control the printer for prin ng and regular maintenance. Popup the printer icon to close the Panel. Fill Resin Redraw Resin Full Screen Clean Show Logo Reset Z-Axis Zero Posi on Z-axis Compensa on Calibra on of Resin Level Sensor Auto Pump Start Bu on Cancel Job Bu on 17/23

18 Start Job Click Start Bu on prin ng., the system will send the current slice data to printer and start Pause Job Click Pause to suspend a prin ng job. Resume Job Click Resume to resume a paused prin ng job. Cancel Job Click Cancel Job to cancel the current prin ng job. Renaming a Printer Double clicking the printer name or s/n to input a new alias and press enter to finish renaming. Remote Monitoring Status of Remote Monitoring (ON or OFF) is shown beside the Remote Monitoring Label. When Status is OFF, double click OFF label to start func on. If printer is not registered, a registra on dialog will open, func on will turn ON a er registra on is finished. If printer is registered, Remote Monitoring will turn ON. When Status is ON, double clicking "ON" to turn off remote monitoring func on. Fill Resin Click Fill to start pumping resin from the bo le into the tank. Click again to stop. Redraw Resin Click Redraw to start redrawing resin from the tank back into the bo le. Click again to stop. 18/23

19 Full Screen Clean Click Clean to expose the en re screen in order to fully cure and clean the resin at the bo om of the tank. Debris from previous jobs may damage the LCD screen in the next job. The Clean func on will form an en re resin film entrapping the debris from previous jobs. Once the resin film is removed, the resin tank is clean and ready for the next print job. TIP It is recommended to check the bo om of resin tank before every print job. When there are debris either floa ng in the resin or s cking on the bo om of vat, they may damage the LCD. DO NOT remove the resin tank during cleaning exposure. A er exposure, however, you may li the resin tank to remove the cured resin film. Show Logo Show Logo is used to verify if the LCD screen is func onal. Before using this func on, please remove the build pla orm and resin tank, then click Show Logo Bu on to show UNIZ logo on the LCD screen to test communica on and LCD screen. Reset Z-Axis Zero Posi on Reset Z-axis Zero Posi on is used to reset the zero of Z axis. Please remove the resin tank and wipe clean the build pla orm before using this func on. On the popup box, click Yes Bu on, then push the build pla orm down manually to touch the LCD screen, then click Yes Bu on again, the pla orm will rise back to the upper posi on and finishes the process. Z-axis Compensa on Click "Z-axis Compensa on" bu on, open dialog, input a value and submit to finish the compensa on func on. Z-axis Compensa on can only subtract (shorten) Z-axis height from the mechanical calibrated value. 19/23

20 Calibra on of Resin Level Sensor Click "Calibra on of Resin Level Sensor" bu on, open Calibra on dialog Resin Tank Level Cal 1. Install an empty resin tank, a ach resin sensor to the tank; 2. Calibrate Tank Empty Level: Clicking "Read" and "Cal" bu on un l "Tank Reading" is within ± Calibrate Tank Low Threshold: Replace the empty Tank with a Tank filled with 2-3mm resin (or fill the empty Tank with 2-3mm resin), click "Read " bu on; 4. Calibrate Tank High Threshold: Replace the Tank with a Tank filled with 7-8mm resin (or fill the Tank with 7-8mm resin), click "Read " bu on, finish the Tank Level Calibra on by clicking "Cal " bu on; Calibra on of Bo le Resin Level 1. Install an Empty Resin Bo le, install Resin Level Sensor to the Resin Tank 2. Calibrate Bo le Empty Level: Clicking "Read" and "Cal" bu on un l "Bo le Reading" is within ± High/Low threshold is not available in this version. Auto Pump Click Auto Pump Bu on to turn on / off automa c pumping. If resin level is too low in the tank and Auto Pump is on, the printer will pump resin from the bo le into the tank automa cally. 20/23

21 Print Process 1. Send to Printer Click Start Bu on to send current slice to this printer. 2. Complete the File Transfer Once you click Start, Uniz Desktop's progress bar and the printer's front LED circle bu on will indicate the file transfer progress. 3. Confirm Print Job Make sure that your printer is ready to print and then touch the printer's front LED circle bu on to confirm print job. WARNING Before final confirma on, please make sure the build pla orm, resin tank, and resin bo le are installed. Make sure the build pla orm and resin tank are clear of debris. Make sure the resin level sensor is properly installed. A er confirma on, you may disconnect your computer from the printer. 21/23

22 Upload Slice(Optional) If you want to share your print in Uniz Cloud, press the Upload Bu on on the main tools to open following sub menu. Images must contain photos of your print. A er your upload completed we will look through your request, if pass audits we will mail you and your slice will be upload to Uniz cloud. Additional Tools New Slice The so ware will clear everything you made. Save Scene The so ware save everything you made to uniz file that contains model data, support structures and transforma on data (transla on, orienta on, scaling) and you will be able to load your model including all modifica on later. Save Scene as The so ware save current scene to another.uniz file. Undo Operation 22/23

23 Repeal one previous opera on. Redo Operation Remake one previous opera on repealed by "Undo". Advanced Setting Exposure Time of First Layers sets exposure me of first 3 layers, which is usually longer than other layers to ensure strong adhesion between the pla orm and the print.15 is suggested. Power sets the power to the UV LEDS and will have an impact on curing of the resin Power of LED module is suggested. Wall thickness of Hollowing sets the shell thickness of parts hollowed with the advanced se ngs in the slice menu. 23/23

EXERCISE 2: GETTING STARTED WITH FUSION

EXERCISE 2: GETTING STARTED WITH FUSION Exercise Objec ves In this exercise, you ll be using the fully prepared example data to explore the basics of FUSION. Prerequisites Successful comple on of Exercise 1 (Download and Install FUSION and the

More information

EDTracker Pro Wired. User Guide

EDTracker Pro Wired. User Guide EDTracker Pro Wired User Guide ENG Document Issue 1.0 Introduction Thank you for purchasing your EDTracker Pro Wired head tracker. We hope that it becomes an invaluable addi on to your gaming experience

More information

Dremel Digilab 3D Slicer Software

Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer prepares your model for 3D printing. For novices, it makes it easy to get great results. For experts, there are over 200 settings to adjust to

More information

Printed Circuit Board Assembly Analysis / 1

Printed Circuit Board Assembly Analysis / 1 Printed Circuit Board Assembly Analysis Introduction DFM Concurrent Costing The first step in the manufacture of the printed circuit board assembly is the fabrica on of the bare circuit board, o en called

More information

DP200/DP201/DP102 Series. Slicer Program Manual

DP200/DP201/DP102 Series. Slicer Program Manual DP200/DP201/DP102 Series Slicer Program Manual Read the User Manual before operating the product, and keep the manual at a convenient place near the product. Contents 1. Slicer Program Manual-----------------------------------------------------------------------------------------------------3

More information

Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide

Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to

More information

Q. How do I start using Mānoa Guardian? A. Go to the App Store or Google Play on your mobile device and download the app. Search for Rave Guardian.

Q. How do I start using Mānoa Guardian? A. Go to the App Store or Google Play on your mobile device and download the app. Search for Rave Guardian. How it Works Q: Why use? A. is designed to allow users quick and easy contact with UH Mānoa Department of Public Safety (DPS) officers, and has addi onal features for increasing safety on campus. Using,

More information

Cura (Documentation for version )

Cura (Documentation for version ) Cura (Documentation for version 15.04.06) Getting Started Installation To start the installation of Cura, download it first. After downloading, open the installer and run the installation wizard to complete

More information

SolidWorks Intro Part 1b

SolidWorks Intro Part 1b SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks

More information

ideamaker Manual

ideamaker Manual ideamaker Manual Using ideamaker... 2 Basic information... 2 What is ideamaker?... 2 Where to download ideamaker?... 2 Install ideamaker... 3 Let s Print!... 6 How to use ideamaker?... 23 Interface...

More information

PC PRIVACY SHIELD. User Manual. PC Privacy Shield

PC PRIVACY SHIELD. User Manual. PC Privacy Shield PC PRIVACY SHIELD User Manual Table of Contents Welcome...3 Compa bility...3 Installa on and First Scan...5 Registra on...7 Status Screen...8 Ac ve Cleaning...9 Features Bar...9 Scan and Clean...10 User

More information

DFM Concurrent Costing

DFM Concurrent Costing Die Casting Analysis Start a new analysis For the purposes of this tutorial we will es mate the cost per part of manufacturing 200,000 of the disk drive casings shown here: front The material is to be

More information

Getting Started KIDASA So ware, Inc. All Rights Reserved

Getting Started KIDASA So ware, Inc. All Rights Reserved Getting Started 1989 2012 KIDASA So ware, Inc. All Rights Reserved Getting Started: Exploring Your Workspace To learn more about the Milestones window choose: Help /Help Topics /Milestones Professional

More information

BFB Axon software manual

BFB Axon software manual Contents Install BFB Axon on your computer from the website for the latest version: www.bitsfrombytes.com > Downloads> Software. (Or from the SD card if supplied). If you are using Vista or windows 7,

More information

Working in Print Studio

Working in Print Studio Working in Print Studio Print Studio is Autodesk's print preparation software. Print Studio keeps your production moving by analyzing, fixing and preparing your 3D files in minutes. Rotate, size, and position

More information

NSR-N43. Navigation mirror. User manual

NSR-N43. Navigation mirror. User manual NSR-N43 Navigation mirror User manual Table of contents Chapter one: Product introduction....................... 1 Main feature........................................ 1 Specification........................................

More information

REGION: NORTH AMERICA

REGION: NORTH AMERICA R U M A REGION: NORTH AMERICA R U M A Chapter Issue Date 1 Introduc on 05/21/2012 2 Install and Upgrade Minimum Hardware Requirements Android Opera ng System and Wi Fi Se ngs Installing Revoquest the First

More information

ideamaker Manual

ideamaker Manual ideamaker Manual www.raise3d.com 1 Using ideamaker... 3 1.1 What is ideamaker?... 3 1.2 Where to download ideamaker?... 3 2 Install ideamaker... 4 3 Let s Print!... 9 3.1 Import.STL files... 9 3.2 Slice

More information

This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality.

This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality. This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality. If you need further assistance with questions, you can refer to the

More information

SolidWorks 2½D Parts

SolidWorks 2½D Parts SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select

More information

Car Video Recorder. RoadRunner 535W. User Manual

Car Video Recorder. RoadRunner 535W. User Manual Car Video Recorder About this user manual This user manual is specially designed to detail the device s func ons and features. - Please read this manual before using the device to ensure safe and proper

More information

USER MANUAL. for Windows & Mac

USER MANUAL. for Windows & Mac Stick Reader SDL 440S USER MANUAL for Windows & Mac Links to mobile apps, printers and weighers. Version 03.10.2016 1 Copyright 2016 Shearwell Data Ltd Table of Contents Ge ng started - Page 3 Ba ery informa

More information

Networking for Wide Format Printers

Networking for Wide Format Printers Networking for Wide Format Printers Table of Contents Configure PC before RIP Installa on... 1 Verifying Your Network Se ngs for Mac Communica on... 3 Changing Your Network Adapter for Mac Communica on...

More information

PASSWORD SHIELD. User Manual

PASSWORD SHIELD. User Manual PASSWORD SHIELD User Manual Table of Contents Welcome...3 Compa bility...3 Installa on Guide and Database Crea on...4 Registra on...7 Workspace...8 Control Bu ons...9 File...12 Edit...13 View...14 Tools...15

More information

SOLAR. User manual of high security level electronic lock. Gebaude Sicherheitstechnik Vertriebs GmbH, Kassel

SOLAR. User manual of high security level electronic lock. Gebaude Sicherheitstechnik Vertriebs GmbH, Kassel SOLAR User manual of high security level electronic lock Gebaude Sicherheitstechnik Vertriebs GmbH, 34123 Kassel Wer. 1.1 / 02-2013 Contents General informa on...3 Func ons overview and descrip on...4

More information

USER MANUAL. for Windows & Mac. Links to mobile apps, printers and weighers.

USER MANUAL. for Windows & Mac. Links to mobile apps, printers and weighers. Stick Reader SDL 400S USER MANUAL for Windows & Mac Links to mobile apps, printers and weighers. Version 09.10.2017 1Copyright 2017 Shearwell Data Ltd Table of Contents Ge ng started - Page 3 Ba ery informa

More information

WORKSWELL WIRIS PRO QUICK START GUIDE. FW Version: Release date: 22 nd March, Revision : 1.2 EN

WORKSWELL WIRIS PRO QUICK START GUIDE. FW Version: Release date: 22 nd March, Revision : 1.2 EN WORKSWELL WIRIS PRO QUICK START GUIDE FW Version: 1.0.0 Release date: 22 nd March, 2019 Revision : 1.2 EN Standard Package Content Confirm that the package contains the items listed below: WIRIS Pro camera

More information

Vividia HM-250 HDMI/LCD/USB/TV Portable. Digital Measurement Microscope

Vividia HM-250 HDMI/LCD/USB/TV Portable. Digital Measurement Microscope Vividia HM-250 HDMI/LCD/USB/TV Portable Digital Measurement Microscope Table of Contents 1. Precaution. 3 2. Preparation..5 Package Contents.. 6 Part Names & Functions..6 3. Specifications.... 7 4. Use

More information

DeeControl User Manual

DeeControl User Manual The setup, service, and functions of the DeeControl slicing software DeeControl User Manual Version 1.1 - 2 - Content 2. Introduction...- 4-3. Minimum requirements...- 4-4. Installation...- 4-5. Launching

More information

Dreamer Series User Manual

Dreamer Series User Manual Dreamer Series User Manual Welcome to the world of the Dreamer. To ensure that you have the best possible user experience, it s important that you follow this user manual. Let s get started! In Parts I

More information

Digital Proximity System Opera on and Maintenance Manual

Digital Proximity System Opera on and Maintenance Manual Digital Proximity System Opera on and Maintenance Manual The DPS (Digital Proximity System) family consists of two devices, the MX2033 and MX2034. The MX2033 is a conven onal 3-wire driver while the MX2034

More information

Kinetic Switch APP User Manual

Kinetic Switch APP User Manual Kinetic Switch APP User Manual General Safety Instruc ons Please read this manual thoroughly before first use and keep it in a safe place for future reference. The safety precau ons enclosed herein reduce

More information

1. 3DWOX add-in program user manual

1. 3DWOX add-in program user manual . 3DWOX add-in program user manual Install Guide When 3DWOX add-in installation is complete, 3DWOX add-in tab will appear. While SolidWorks model is open, click Print 3D on the 3DWOX tab. 2 Solidworks

More information

Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.

Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out. Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also

More information

ideamaker Manual

ideamaker Manual ideamaker Manual www.raise3d.com 1 Using ideamaker... 3 1.1 What is ideamaker?... 3 1.2 Where to download ideamaker?... 3 2 Install ideamaker... 4 3 Let s Print!... 9 3.1 Import.STL files... 9 3.2 Slice

More information

GETTING STARTED TABLE OF CONTENTS

GETTING STARTED TABLE OF CONTENTS Sketchup Tutorial GETTING STARTED Sketchup is a 3D modeling program that can be used to create 3D objects in a 2D environment. Whether you plan to model for 3D printing or for other purposes, Sketchup

More information

WiFi Security Camera User Manual

WiFi Security Camera User Manual WiFi Security Camera User Manual Prepara on Before Use 1. Smartphone/ Tablet PC Version request: ios 7.0 above / Android 3.0 above 2. OCam-M3 3. A Wi-Fi router that can be connected to the Internet. 4.

More information

Software Manual. Revision 1.3

Software Manual. Revision 1.3 Software Manual Revision 1.3 Copyright 2015 by Kudo3D. This material may be distributed only subject to the terms and conditions set forth in the Creative Commons Attribution-NonCommercial-NoDerivatives

More information

DO NOT LOSE THIS SHEET - YOUR FACTORY MASTER CODE IS UNIQUE TO YOUR KEYPAD

DO NOT LOSE THIS SHEET - YOUR FACTORY MASTER CODE IS UNIQUE TO YOUR KEYPAD Estate Swing 433 MHz Wireless 4 Channel Keypad Overview This keypad only works with the Estate Swing 433 MHz receiver: 433ESREC Standard range is 200 feet. Keypad has 4 access codes. Each access code sends

More information

USER MANUAL. for Windows & Mac

USER MANUAL. for Windows & Mac Stick Reader SDL 400S USER MANUAL for Windows & Mac Links to mobile apps, printers and weighers. Version 01.09.2015 1 Copyright 2015 Shearwell Data Ltd Table of Contents Ge ng started - Page 3 Ba ery informa

More information

2. Navigate to 3dsystems.com/shop/cubepro/downloads. Select Windows from the Software Download section at the bottom of the page.

2. Navigate to 3dsystems.com/shop/cubepro/downloads. Select Windows from the Software Download section at the bottom of the page. CubePro Software CubePro software is an easy-to-use tool that simplifies the printing process. The software is available by logging in to your http://3dsystems.com/shop account. Downloads are available

More information

Exercise Guide. Published: August MecSoft Corpotation

Exercise Guide. Published: August MecSoft Corpotation VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4

More information

Introduction Make a plan with tool Rectangle Measurements Toolbar Enter Return Measurements Toolbar Measure Protractor

Introduction Make a plan with tool Rectangle Measurements Toolbar Enter Return Measurements Toolbar Measure Protractor Introduction Open SketchUp, and an empty file appears. You are looking at the red-green plane, and the blue axis (vertical) is pointing toward you. By default, you are in the Line tool, as indicated by

More information

Guide: Slicer for Fusion

Guide: Slicer for Fusion Overview What is Slicer? Laser cutting is a very fast production and manufacturing method that is limited to only cutting flat surfaces. Slicer for Fusion 360 is an Autodesk software that allows you to

More information

1. Website/Pages/Stripes/Items/Elements

1. Website/Pages/Stripes/Items/Elements Contents 1. Website/Pages/Stripes/Items/Elements... 2 2. Click & Edit, Mix & Match... 3 3. Adding a Stripe... 4 4. Managing Stripes... 5 5. Adding a Page... 8 6. Managing Pages and Menus... 9 7. Adding

More information

How to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?

How to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements? BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software

More information

BW 2050 Manual. Weltech Interna onal Limited INTRODUCTION

BW 2050 Manual. Weltech Interna onal Limited INTRODUCTION INTRODUCTION Weltech Interna onal Limited The BW 2050 has been designed to give the operator complete flexibility for manual live bird weighing. The BW 2050 is ba ery operated and will weigh for up to

More information

General Information Project management Introduction... 4 Getting Started Input geometry... 7

General Information Project management Introduction... 4 Getting Started Input geometry... 7 Tutorial Shell Tutorial Shell All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval system or published,

More information

WEB TEACHER GUIDE. ebackpack provides a separate Student Guide through our support site at

WEB TEACHER GUIDE. ebackpack provides a separate Student Guide through our support site at ebackpack Web Teacher Guide Page 1 of 21 WEB TEACHER GUIDE This guide will cover basic usage of ebackpack for a teacher (assignments, storage, homework review, collaboration, and Act As support). If you

More information

Guide to WB Annotations

Guide to WB Annotations Guide to WB Annotations 04 May 2016 Annotations are a powerful new feature added to Workbench v1.2.0 (Released May 2016) for placing text and symbols within wb_view tabs and windows. They enable generation

More information

Piping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index

Piping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Piping Design Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Dassault Systèmes 1994-2001. All rights reserved. Site Map Piping Design member member

More information

SIRE Solution Suite. Better Outcomes. Active Review Administration and User Manual. A Publication Of

SIRE Solution Suite. Better Outcomes. Active Review Administration and User Manual. A Publication Of Active Review Administration and User Manual SIRE Solution Suite An Official Manual of SIRE Technologies Document and Legislative Management Software Version 6.3 A Publication Of Better Outcomes. 2 SIRE

More information

WAYLAND FREE PUBLIC LIBRARY 3D Design and Printing Tutorial: Create a Keychain

WAYLAND FREE PUBLIC LIBRARY 3D Design and Printing Tutorial: Create a Keychain WAYLAND FREE PUBLIC LIBRARY 3D Design and Printing Tutorial: Create a Keychain Welcome! In this tutorial we will be creating a 3D printed keychain. You will personalize this name tag with text to make

More information

Digital City: Introduction to 3D modeling

Digital City: Introduction to 3D modeling Digital City: Introduction to 3D modeling Weixuan Li, 2017 PART I: Install SketchUp and Introduction 1. Download SketchUp Download SketchUp from their official website: https://www.sketchup.com Go to the

More information

ezimagex2 User s Guide Version 1.0

ezimagex2 User s Guide Version 1.0 ezimagex2 User s Guide Version 1.0 Copyright and Trademark Information The products described in this document are copyrighted works of AVEN, Inc. 2015 AVEN, Inc. 4595 Platt Rd Ann Arbor, MI 48108 All

More information

Tutorial 1 Engraved Brass Plate R

Tutorial 1 Engraved Brass Plate R Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview

More information

EASY INTERACTIVE WHITEBOARD

EASY INTERACTIVE WHITEBOARD EASY INTERACTIVE WHITEBOARD CONNECT COMPUTER/TURN ON PROJECTOR LAPTOP For the projectors in the labs, a computer is connected. These instructions are for you to connect a laptop computer to the projector.

More information

Navigator Software User s Manual. User Manual. Navigator Software. Monarch Instrument Rev 0.98 May Page 1 of 17

Navigator Software User s Manual. User Manual. Navigator Software. Monarch Instrument Rev 0.98 May Page 1 of 17 User Manual Navigator Software Monarch Instrument Rev 0.98 May 2006 Page 1 of 17 Contents 1. NAVIGATOR SOFTWARE 2. INSTALLATION 3. USING NAVIGATOR SOFTWARE 3.1 STARTING THE PROGRAM 3.2 SYSTEM SET UP 3.3

More information

How to Measure Wedge. Purpose. Introduction. Tools Needed

How to Measure Wedge. Purpose. Introduction. Tools Needed Purpose Optical Wedge Application (OWA) is an add-on analysis tool for measurement of optical wedges in either transmission or reflection. OWA can measure a single part or many parts simultaneously (e.g.

More information

Introduction And Overview ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary

Introduction And Overview ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Introduction And Overview 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary The ANSYS Workbench represents more than a general purpose engineering tool. It provides a highly integrated engineering

More information

Remote Ticket Entry. System/User Requirements

Remote Ticket Entry. System/User Requirements North Carolina 811, Inc. 2300 West Meadowview Rd Suite 227 Greensboro, North Carolina 27407 336.855.5760 Remote Ticket Entry An internet based cket entry system, Remote Ticket Entry (RTE), allows excavators

More information

3D Engrave USER'S MANUAL

3D Engrave USER'S MANUAL 3D Engrave USER'S MANUAL This document is the operation manual for 3D Engrave for Windows, a program for making relief. Contents Contents Part 1 What's 3D Engrave? 1-1 System Requirements... 6 1-2 Overview

More information

Selective Space Structures Manual

Selective Space Structures Manual Selective Space Structures Manual February 2017 CONTENTS 1 Contents 1 Overview and Concept 4 1.1 General Concept........................... 4 1.2 Modules................................ 6 2 The 3S Generator

More information

A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)

A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.

More information

USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker

USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker 1 Duplicator 5S & 5S MINI Desktop 3D Printers USER MANUAL Resolution 0.02mm Speed 300mm/second Software: Wanhao Maker 2014/2015 Wanhao USA 3 Table of Contents Welcome 1 Printer Specifications 2 Unboxing

More information

SolidWorks Import Tutorial

SolidWorks Import Tutorial SolidWorks Import Tutorial Current Item: SolidWorks Import Tutorial Before You Begin This tutorial will step you through the process of exporting a file from SolidWorks and importing it into Bend-Tech.

More information

Licom Systems Ltd., Training Course Notes. 3D Surface Creation

Licom Systems Ltd., Training Course Notes. 3D Surface Creation , Training Course Notes Work Volume and Work Planes...........................1 Overview..........................................1 Work Volume....................................1 Work Plane......................................1

More information

Technical Support: CUBE USER MANUAL

Technical Support: CUBE USER MANUAL CUBE THE DESKTOP 3D PRINTER USER MANUAL 2012-12-05 1 Contents 1 Installing software...3 1.1 Installing Python... 3 1.2 Installing ReplicatorG... 5 2 Pre-print checks...9 2.1 Power up...9 2.2 Connect to

More information

EXERCISE 4: CALCULATE LIDAR METRICS

EXERCISE 4: CALCULATE LIDAR METRICS Exercise Objec ves There are three parts to this exercise. Part 1 describes the process to extract metrics from the fixed radius plot subsets created in the last exercise. Part 2 describes how to extract

More information

Software for Observation and Measurement SGMMS V2.6. Users Manual

Software for Observation and Measurement SGMMS V2.6. Users Manual AFM45-S03-12402 Software for Observation and Measurement SGMMS V2.6 Users Manual SIGMAKOKI Co., LTD. CONTENTS 1 OVERVIEW... - 3-2 BEFORE USE... - 3-2-1 OPERATIONAL ENVIRONMENT...- 3-2-2 INSTALLATION PREPARATION...-

More information

Lesson for levels K-5 Time to complete: min

Lesson for levels K-5 Time to complete: min Lesson Plan: Lesson for levels K-5 Time to complete: 45-90 min Lesson Plan: Level: Grades K-5 (ages 5-10) Time to complete: ~45-90 minutes Learn how to build basic geometry, apply materials, and import

More information

Panasonic VRF Software. New features of VRF software

Panasonic VRF Software. New features of VRF software Panasonic VRF Software New features of VRF software April 2013 1 Contents: Mounting scheme... 5 1. Import building scheme into software... 5 1.1. Export building scheme as DXF from AutoCAD... 5 1.2. Export

More information

DINB100-SA Standalone Biometric Reader

DINB100-SA Standalone Biometric Reader EN DINB100-SA Standalone Biometric Reader User Manual v.b2 Contents 1.0 INTRODUCTION... 3 2.0 MOUNTING AND DISMOUNTING... 3 3.0 SPECIFICATIONS... 3 4.0 APPLICATION DIAGRAM... 4 5.0 WIRING... 4 6.0 RECOMMENDED

More information

ENJOY Introduction. Software Installation* Hardware. Calibration Settings. Print test. Appendex. Install print S/W Driver Install

ENJOY Introduction. Software Installation* Hardware. Calibration Settings. Print test. Appendex. Install print S/W Driver Install Quick Start Manual 1 ENJOY Introduction C O N T E N T S 6 5 Appendex 4 Print test 3 2 Hardware Calibration Settings Software Installation* Install print S/W Driver Install Hardware Intro Cable installation

More information

Software Manual. Version: H BENCHTOP ROBOT SOFTWARE USER GUIDE Version H

Software Manual. Version: H BENCHTOP ROBOT SOFTWARE USER GUIDE Version H Software Manual Version: H6.1.1.292 BENCHTOP ROBOT SOFTWARE USER GUIDE Version H6.1.1.293 Software Manual Table of Contents SECTION 1: INTRODUCTION... 5 1.1 Introduction...6 1.2 Safety...6 1.3 New Features...6

More information

SOLIDWORKS 2019 Quick Start

SOLIDWORKS 2019 Quick Start SOLIDWORKS 2019 Quick Start David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE Powered by TCPDF

More information

Software User s Manual

Software User s Manual 1 About the manual 2 Navigating the manual 2 3 Opening the control panel 3 Control panel overview 4 Control panel settings 5 Calibrating the interactive pen display 6 Adjusting frequency and tracking (VGA

More information

Case Study 1: Piezoelectric Rectangular Plate

Case Study 1: Piezoelectric Rectangular Plate Case Study 1: Piezoelectric Rectangular Plate PROBLEM - 3D Rectangular Plate, k31 Mode, PZT4, 40mm x 6mm x 1mm GOAL Evaluate the operation of a piezoelectric rectangular plate having electrodes in the

More information

Central Management Software for NVR-915 / NVR-1615 CV5-M256

Central Management Software for NVR-915 / NVR-1615 CV5-M256 Central Management Software for NVR-915 / NVR-1615 Table of Contents Chapter 1. Main Console... 4 1.1 Tool Bar... 4 1.2 NVR List... 5 1.3 Division List... 7 1.4 Group List... 9 1.5 PTZ Panel...11 1.6 Operation

More information

Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE

Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE Getting Started with Abaqus: Interactive Edition Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE The following section is a basic tutorial for the experienced Abaqus user. It leads you

More information

BT SIP Trunk CRF User Guide - BT Sales / Originator + Specialist

BT SIP Trunk CRF User Guide - BT Sales / Originator + Specialist BT SIP Trunk CRF User Guide - BT Sales / Originator + Specialist The following informa on provides an overview of how to use and complete the SIP Trunk elements of the BT System CRF portal. 1. Introduc

More information

DINB100-SA-KIT Standalone Biometric Kit

DINB100-SA-KIT Standalone Biometric Kit DINB100-SA DINRTT DINB100-SA-KIT Standalone Biometric Kit User Manual v.b3 Contents 1.0 INTRODUCTION... 3 2.0 MOUNTING AND DISMOUNTING... 3 3.0 SPECIFICATIONS... 3 4.0 APPLICATION DIAGRAM... 4 5.0 WIRING...

More information

OPTIONAL EXERCISE 1: CREATING A FUSION PROJECT PART A

OPTIONAL EXERCISE 1: CREATING A FUSION PROJECT PART A Exercise Objec ves In the previous exercises, you were provided a full Fusion LIDAR dataset. In this exercise, you will begin with raw LIDAR data and create a new Fusion project one that will be as complete

More information

Table of Contents. Revu ipad. v3.6. Navigation. Document Manager. File Access. Markups. Signature Tool. Field Verification Measurements

Table of Contents. Revu ipad. v3.6. Navigation. Document Manager. File Access. Markups. Signature Tool. Field Verification Measurements Table of Contents Navigation Document Manager File Access Markups Signature Tool Field Verification Measurements Editing Properties Tool Sets & the Tool Chest Markups List Forms Studio Sessions Studio

More information

Handout Objectives: a. b. c. d. 3. a. b. c. d. e a. b. 6. a. b. c. d. Overview:

Handout Objectives: a. b. c. d. 3. a. b. c. d. e a. b. 6. a. b. c. d. Overview: Computer Basics I Handout Objectives: 1. Control program windows and menus. 2. Graphical user interface (GUI) a. Desktop b. Manage Windows c. Recycle Bin d. Creating a New Folder 3. Control Panel. a. Appearance

More information

PowerSpec Ultra 3D Printer Start-up Guide Table of Contents

PowerSpec Ultra 3D Printer Start-up Guide Table of Contents PowerSpec Ultra 3D Printer Start-up Guide Table of Contents 1 What's Included in the Box?...Page 3 2 Un-boxing.Page 4 3 Initial Hardware Installation Page 6 4 Software Instruction.Page 8 5 Filament Page

More information

Workbooks & Worksheets. Getting Started. Formatting. Formulas & Functions

Workbooks & Worksheets. Getting Started. Formatting. Formulas & Functions 1 Getting Started Cells Workbooks & Worksheets Formatting Formulas & Functions Chart Printing 2 Getting Started Start a spreadsheet program Recognize the spreadsheet screen layout Use the ribbon,quick

More information

Version 10 Addendum to the User s Manual

Version 10 Addendum to the User s Manual Version 10 Addendum to the User s Manual Introduction to Version 10 This latest release of the diagram program boasts improved productivity via the new user interface, real-time 3D, a new 3D rendering

More information

Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013

Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013 SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013

More information

Permits User s Guide. Submit Application. Upload Files & Pay Fees. Plan Review Process. Final PreScreen. Project Approval. Electronic Plan Review

Permits User s Guide. Submit Application. Upload Files & Pay Fees. Plan Review Process. Final PreScreen. Project Approval. Electronic Plan Review New Castle County Land Use Permits Sec on Electronic Plan Review Permits User s Guide Submit Application Upload Files & Pay Fees Plan Review Process Final PreScreen Project Approval Rev. 06/2018 2 l eplans

More information

1. Product descrip on copy

1. Product descrip on copy This document contains essen al marke ng copy for resellers, for use on product store, news announcements and technical documenta on. In this document: 1. Product descrip on copy 2. USP features (short)

More information

Steps to Print (without supports) This will take you from Meshmixer to the PSU PrintDepot

Steps to Print (without supports) This will take you from Meshmixer to the PSU PrintDepot Steps to Print (without supports) This will take you from Meshmixer to the PSU PrintDepot Read this first to understand some of the dilemmas a model can have and ways to avoid printing problems: http://www.3dshook.com/2016/05/how-to-optimize-a-3d-model-for-3dprinting/#normal

More information

Figure 1: Diagram of a 3D printer. You can find the most up-to-date version of this manual in electronic format on our website:

Figure 1: Diagram of a 3D printer. You can find the most up-to-date version of this manual in electronic format on our website: INTRODUCTION What is a 3D printer? A 3D printer (see Figure 1) is a device that is able to create solid three-dimensional objects using a design produced on a computer. Currently, there are various technologies

More information

FactoryLink 7. Version 7.0. Client Builder Reference Manual

FactoryLink 7. Version 7.0. Client Builder Reference Manual FactoryLink 7 Version 7.0 Client Builder Reference Manual Copyright 2000 United States Data Corporation. All rights reserved. NOTICE: The information contained in this document (and other media provided

More information

GETTING STARTED WITH SKETCHUP

GETTING STARTED WITH SKETCHUP MENUS TOOLBARS GETTING STARTED WITH SKETCHUP When opening a new document the image will likely look like this. Familiarize yourself with the options available in the program. Additional toolbars can be

More information

PATTERSON HALL 205 (Digital Smart Classroom)

PATTERSON HALL 205 (Digital Smart Classroom) PATTERSON HALL 0 (Digital Smart Classroom) GETTING STARTED 1 GETTING STARTED 1. Lower the projec on screen with the up/down switch underneath the lectern.. If the touch panel shows a black screen, touch

More information

BBR3. Bending Beam Rheometer 3

BBR3. Bending Beam Rheometer 3 BBR3 Bending Beam Rheometer 3 Touch-screen system with built-in computer for determining flexural creep s ffness for asphalt binder and other materials Applied Test Systems P: +1-724-283-1212 Email: Sales@atspa.com

More information

N2KExtractor. Maretron Data Extraction Software User s Manual

N2KExtractor. Maretron Data Extraction Software User s Manual N2KExtractor Maretron Data Extraction Software User s Manual Revision 3.1.6 Copyright 2017 Maretron, LLP All Rights Reserved Maretron, LLP 9014 N. 23rd Ave #10 Phoenix, AZ 85021-7850 http://www.maretron.com

More information

Design a Simple Fan in 123D Design

Design a Simple Fan in 123D Design Design a Simple Fan in 123D Design Learn to use 123D Design to make and print this simple fan. 123D Design is a free, powerful, yet simple 3D creation and editing tool. It allows you to design and build

More information

QUADRA-CHEK 2000 Demo User's Manual. Evaluation Unit

QUADRA-CHEK 2000 Demo User's Manual. Evaluation Unit QUADRA-CHEK 2000 Demo User's Manual Evaluation Unit English (en) 06/2018 Contents Contents 1 Fundamentals...7 2 Software Installation...11 3 Basic Operation... 17 4 Software Configuration...41 5 Quick

More information