4: Yamaha Page 4.1 Quarter Screen

Size: px
Start display at page:

Download "4: Yamaha Page 4.1 Quarter Screen"

Transcription

1 New Software v6.21 Including compatibility with BBWX4 SiriusXM Weather Receiver, FLIR Model M132/232 Cameras, FAR2xx7, FAR15x3 and FAR15x8 Radars, and Fusion Audio Models 755 and Apollo 1: Key Brand New Features 1.1 Sailing with NavNet TZtouch2 1.2 FAR Series Radar with NavNet TZtouch2 1.3 SAR Operation and Intercept with NavNet TZtouch2 1.4 Enhanced Cloud Features with NavNet TZtouch2 1.5 New Full Keyboard with NavNet TZtouch2 1.6 Refined NAVpilot Window 2: Plotter 2.1 Live Trail with 10 Hz Position Update 2.2 Track Recording by Distance 2.3 Continue Navigation with Autopilot 2.4 Route Information Bar Changed 2.5 Icon to Download Unlock Code 3: Fish Finder 3.1 Post Processing Gain 3.2 White Edge 3.3 Gain Control Box in Data Box for Fish Finder and DFF-3D 3.4 Automatic Shift with DFF-3D 4: Yamaha Page 4.1 Quarter Screen 5: VHF 5.1 DSC Call through FM : Instrument Page and Data Box 6.1 Graph Indication on Instrument page and Data Box Axis Speed Indication with SC-33 and SC-70/130 7: Autopilot 7.1 Refined NAVpilot Control Window 7.2 New Autopilot Window for NAVpilot-300 8: Sensor Setup Page 9: Updated eguide 10: Others

2 1. Key Brand New Features 1.1. Sailing with NavNet TZtouch2 A layline can be indicated on the Plotter screen and navigation data box. The layline indication is useful for navigating with a sailboat in order to locate the most appropriate and effective course towards the upwind. See Layline document for more details. Navigation Data Box (Left) and Plotter (Right) 1.2. FAR Series Radar with NavNet TZtouch2 The FAR-2xx7, FAR-15x8, and FAR-15x3 series Radar are selectable as a Radar source through the Ethernet network. Echoes coming from the FAR-2xx7/15x8/15x3 can be displayed on the TZTL12F/15F screen. Available functions and limitations are same as the NavNet 3D and NavNet TZtouch implementations with FAR-2xx7. Notes: (1) Networking NavNet MFDs with the FAR-2xx7 or FAR-15x8 as above is NOT an IMO-approved configuration. (2) Make sure that the software versions and modes are as follows. FAR-15x8 and FAR-15x3 FAR-2xx7 : and later, non-imo mode (FAR-15x8) : and later, non-imo mode (3) The FAR-3000 series is NOT compatible with the NavNet TZtouch2 network. (4) Network with the FAR-2xx8 series is planned in future software updates SAR Operation and Intercept with NavNet TZtouch2 Three (3) types of SAR (Search and Rescue) patterns are available: Parallel/Creeping Line, Expanding Square, and Sector Search. These SAR patterns can be utilized for search and rescue activities by coast guards and patrol boats. 1

3 Parallel/Creaping Line Sector Search Expanding Square In addtion, the Intercept function that been utilized in TZT9/14/BB since v4.01 is also available on the TZTL12F/15F to create a quick active route to a selected AIS or ARPA target. Note: The SAR and Intercept functions are activated in the Service menu. In the Service Menu ([Settings] [Initial Setup] [Serviceman] with password), access the [Utility] tab, turn on [Intercept Mode]. See more details on SAR pattern and Intercept features in Sar and Intercept document Enhanced Cloud Features with NavNet TZtouch2 The database of points and routes can be saved to the Cloud, in addition to save settings implemented in v3.01 in See details on all cloud features in New Cloud Solutions by My TimeZero. 2

4 1.5. New Full Keyboard with NavNet TZtouch2 The new full keyboard unit MCU-005 can control the TZTL12F/15F v Refined NAVpilot Window The NAVpilot control window in the navigation data box and Instrument page is refined with larger icons and numbers. The autopilot window for NAVpilot-300 is enhanced with the Turn/Setting icon to set the navigation mode such as SABIKI and 90 turn, as well as accessing the installation menu setting page. See Section 7 and NavNet TZtouch2_v6.01 new NAVpilot Window for details. Left NAVpilot-300 Window in Navigation Data Box Right NAVpilot-300 Window in Instrument Page 2. Plotter 2.1. Live Trail with 10 Hz Position Update TZTL12F/15F v6.01 draws a seamless track line with 10 Hz position update from a GPS source. The TZTL12F/15F will plot the updated position every 0.1 seconds (10 Hz) to draw a smooth track line for the last five (5) minutes, called Live Trail. This feature can be utilized in speed boats such as sport fishing, coast guard, and partrol boats that run and turn fast. When you need to stay in one position for fishing, drifting motion by current or wind can be monitored in realtime with Live Trail on the TZTL12F/15F. Live Trail in 10 Hz E.g. Track every 30 seconds The trackline is smoothly drawn even when the boat turns. The track line is sometimes blocky when the boat turns. 3

5 The following illustrations show how the Live Trail by 10 Hz position update works. In this example, the boat runs for 7 minutes as shown in the illustration at left. The track is set to draw every 1 minute. [Settings] [Ship & Track]: [Track Interval] [Time] [Time Interval] [1 00s] (= 1 minute) With conventional track, a straight track line is drawn every 1 minute. After navigation, you will see a whole track line consistiing of 7 straight legs. With a 10 Hz position update source connected, a smooth track line is drawn for the latest 5 minutes. As an example, the boat draws the track smoothly for 5 minutes as shown at left. In 6 minutes, the past track line wil be shown as set in the preset track interval. You can see that the past track is drawn in a straight leg, while the track for the latest 5 minutes are drawn smoothly. Here is another example where more past tracks are shown in straight legs while drawing a smooth track for the latest 5 minutes. After the track recording is turned OFF, the whole track line will be shown as set in the preset track interval. 4

6 10 Hz Position Update Sources 10 Hz position update sources. The built-in GPS of TZTL12F/15F v6.01 or later, GP-330B S/N: and later, and SC-33 from FURUNO, as well as others compatible with 10 Hz position update, can be used. TZTL12F/15F v6.01: The process of built-in GPS is improved to update the position at 10 Hz. GP-330B: With the GP-330B S/N: and later networked with the TZTL12F/15F v6.01, the GP-330B can output the position at 10 Hz. Once the GP-330B S/N: and later is activated to update the position at 10 Hz, the GP-330B will keep the update rate even out of the NavNet TZtouch2 network. SC-33: The new SATELLITE COMPASS SC-33 is also compatible with position update at 10 Hz Track Recording by Distance In addition to track recording by a preset time period, recording by distance is added. When a boat stays at a specific position and no track recording is necessary, this setting option can be used. A track will be drawn only when the boat runs over the preset distance, so that the capacity of track points can be saved Continue Navigation with Autopilot When an autopilot is used to steer the boat a new setting option of [Continue Navigation] is available: Access [Settings] [Route] [End Of Route Operation] and select [Stop Navigation] or [Continue Navigation]. 5

7 Continue Navigation (NEW) The active route will NOT be deactivated. XTE and other indications related to the active route will still remain unless an autopilot is set to the STBY (standby) mode. Regardless of connected autopilot models, the boat will keep steering to the final waypoint after passing the final waypoint. There are some cases where this setting can be utilized in combination with an autopilot as shown in the following two (2) cases. Stop Navigation After an arrival message appears, the active route will be deactivated. XTE and other indications related to the active route will disappear. With the NAVpilot-300 and NAVpilot-700 connected, the boat will steer in the preset mode, e.g. straight, turn, figure-8. With an autopilot from other brands, the boat will go straight or shift to the preset steering mode depending on autopilot models. The TZTL12F/15F v5.03 or earlier behave in this way. Case 1 Case 2 A point such as the location above a fish reef is set to the final destination. While you fish around the location, the boat will keep steering to the point. With the BTW (Bearing to Waypoint) and DTW (Distance to Waypoint)shown on the navigation data box, you can refer to the bearing and distance to the destination to monitor the boat movement. With an autopilot from other manufacturers, the boat may stay around the final waypoint because the boat keeps steering to the destination Route Information Bar Changed The color of characters on the route information bar at the top of the Plotter screen is changed from orange to white. V6.01 or later V5.03 or earlier 2.5. Icon to Download Unlock Code With the TZTL12F/15F connected to the Internet, chart unlock codes will automatically be downloaded. The new version has an icon to manually download unlock codes via the Internet in the Catalog page. 6

8 3. Fish Finder Software version 6.01 offers enhanced Fish Finder operation Post Processing Gain The new version 6.01 is compatible with post processing gain with the built-in Fish Finder, DFF1, BBDS1, DFF3, and DFF1UHD. Adjusted gain values will apply to past echoes, which helps identify the best gain setting at the current location. Note: Make sure that the DFF-series Fish Finder sensors have the following versions to have the post processing gain on the TZTL12F/15F screen. Model Version DFF BBDS DFF DFF1UHD White Edge The White Edge function is available with the built-in Fish Finder, DFF1, BBDS1, DFF3, and DFF1UHD. The edge of bottom echo is highlighted in white, which clearly separates bottom targes from the seabed, so that bottom fish can easily be identified. When multiple fish are densely located right above the seabed, echoes from the fish and seabed may look merged on the screen without the white edge. On the other hand, coloring the edge of seabed in white helps to identify the bottom fish. In the following example, the difference between the fish targets and seabed is easily indentified thanks to the white edge. White Edge ON White Edge OFF 7

9 3.3. Gain Control Box in Data Box for Fish Finder and DFF3D The Gain Control Box is available in the navigation data box for built-in Fish Finder, DFF1, BBDS1, DFF3, DFF1UHD, and DFF3D Multi Beam Sonar. The controlled Fish Finder model is displayed in the Gain Control Box Automatic Shift with DFF3D The transmission line on the DFF3D Triple Beam and Side Scan screens can be hidden by automatically shifting the screen in order to make the screen look clean. V6.01: The screen is automatically shifted to hide the transmission line. V5.01/5.02/5.03: The transmission line is present. 8

10 4. Yamaha Page 4.1. Quarter Screen The TZTL12F/15F v5.01 launched the Yamaha engine display in a full screen mode. The new version offers the yamaha page in a quarter (1/4-sized) screen mode. 5. VHF 5.1. DSC Call through FM4800 When the FM4800 is networked with the TZTL12F/15F v6.01 via NMEA2000, a DSC call can be initiated from the TZTL12F/15F. Network via NMEA2000 Operation is quite easy: Just tap an AIS/DSC target and select [DSC Call] from the contextual menu on the TZTL12F/15F. The FM4800 will initiate an individual DSC call to the selected target. In addition, when an MOB is activated on the TZTL12F/15F the FM4800 goes into a special mode, where you just need to push the rotary knob on the FM4800 to initiate the distress call. It eliminates your effort to uncover, press, and hold the distress button, as well as allowing you to focus more on the rescue operation. 9

11 6. Instrument Page and Data Box 6.1. Graph Indication on Instrument page and Data Box The Instrument page and navigation data box have been flexibly customized to show data in digital and graphical indications. The new version adds more flexibility to show the data in graph. The screen at right shows an example of True Wind Angle and Depth data in graph and digital (numeric) indications in different sizes. The following screens are from navigation data boxes. Left: New historical graph indication Middle: Conventional graphic indication Right: Conventional numeric indication Graph details such as plot period and scale can be set in the Instrument page and navigation data box setting page. Instrument Page Data Box Tapped to show setting page 10

12 Axis Speed Indication with SC33 and SC-70/130 A vessel has three (3) types of speed: forward-aft, transverse (port-starboard) at bow, and transverse (port-starboard) at stern. These speed components are called 3-axis speed. With the NMEA2000 PGN: (Vessel Speed Components) input to the TZTL12F/15F v6.01, the 3-axis speed can be shown on the Instrument page or Data Box in graphical and digital indications. Digital values are shown in 2 digits after the decimal point. This precise indication will help monitor the detailed motion of the boat, berth at a harbor, and see how the boat is drifted or sailed. In the graphical indication, wind direction and current/drift direction are also shown. The following illustration shows the 3-axis indications with some descriptions. Example of 3-Axis Indication in Navigation Data Box (1) Top : Transverse (port-starboard) at bow (2) Middle : Forward-aft speed (3) Bottom : Transverse (port-starboard) at stern (4) Purple arrow : Wind direction (5) Orange arrow : Current/drift direction (Without STW input, this arrow will show COG) 3-Aixs Speed Sources The following SATELLITE COMPASS products can output the PGN: (Vessel Speed Components) for 3-aixs speed. SC33 SC70 SC130 11

13 7. Autopilot 7.1. Refined NAVpilot Control Window The NAVpilot control window in the navigation data box and Instrument page is refined with larger icons and numbers. V6.01 with NAVpilot-700/711C AUTO Mode V5.01 with NAVpilot-700/711C AUTO Mode Available autopilot operation on the TZTL12F/15F screen is different between the NAVpilot-300 and NAVpilot-700/711C. Items NAVpilot-300 NAVpilot-700/711C Navigation mode selection AUTO, NAV, and other modes (See Section 7.2) AUTO and NAV only Course adjustment in AUTO mode Available Available Installation menu settings Available (See Section 7.2) N/A 7.2. New Autopilot Window for NAVpilot-300 The autopilot window for the NAVpilot-300 is slightly different from the VAVpilot-700/711C. The Turn/setting Icon is available at the bottom of the window. This icon enables the user to set the steering mode such as SABIKI or a 90 turn, etc., as well as the ability to access the installation menu. NAVpilot-300 alarms can also be displayed on the TZTL12F/15F screens. Left -Data Box / Right- Instrument page Note: (1) Dodge and Wind modes are not supported. (2) NAVpilot-300 alarms CANNOT be acknowledged on the TZTL12F/15F screen. Make sure to install the NAVpilot-300 control unit FAP

14 8. Sensor Setup Page A network sensor setup page for NMEA2000 devices is available in the Initial Setup menu. As of this release, the autopilot NAVpilot-300 (processor unit) and SATELLITE COMPASS SC33 can be set up on the TZTL12F/15F screen. In the [Settings] [Initial Setup] [NETWORK SENSOR SETUP], available devices are listed up. Select one of them to open the setup window for further setups. 9. Updated ActiveCaptain Database and eguide The basic ActiveCaptain POI database and eguide (built-in operator manual) are updated. The update packages will be provided with v6.01 software package. Basic ActiveCaptain Database Date shown after update: [Settings] [ActiveCaptain] [Last update] IMPORTANT NOTICE: Update via the Internet will no longer be available from May 23, 2018 due to changes in ActiveCaptain format. The database as of May 22, 2018 (US) is the latest content available with the TZTL12F/15F. eguide Pub. No. E E eguide is updated to have the functions to change font size and search by keyword, as well as adding descriptions on new features implemented since v3.01 such as DRS4D-NXT Target Analyzer, Bird Mode, Echo Trail, etc. 13

15 10. Others (1) Engine alarms will be indicated on the message bar at the top of the screen. With v5.01/5.02/5.03, only the engine alarms from Yamaha engines were indicated. The new software will show engine alarms of other engines on the message bar at the top of the screen. (2) Time difference setting in the step of 30 minutes is added. (3) AIS Message indication ON/OFF setting is added. [Settings] [Targets] [AIS Message Notification] [ON]/[OFF] (4) Brilliance synchronization between CZone and TZTL/12F/15F is added. (5) A message will be shown when the Chart Master is turned off: [Charts have to be unlocked again if you change the Chart Master device. Are you sure you want to proceed?] (6) SiriusXM (North America only): Marine zone display speed is improved. (7) SiriusXM (North America only): Compatibility with Canadian Marine Zone is added. (8) When a connected FLIR camera tracks a specific target, the tracking status can be deactivated by tapping on the FOV (field of view) symbol. (9) AXIS video servers can be selected as a video source for FLIR camera. (10) AIS symbols close to own ship are properly shown in realtime. (11) AIS-SART name indication is corrected. (12) Chart detection failure is corrected. (13) XTE value output is corrected. (14) Correct Yamaha alarm indications are shown. - SATELLITE COMPASS is trademarks of FURUNO. --- END All brand and product names are registered trademarks, trademarks or service marks of their respective holders. 14

Software version 6.01 New NAVpilot Window

Software version 6.01 New NAVpilot Window Software version 6.01 New NAVpilot Window 1. NAVpilot Integration with NavNet TZtouch2 TZTL12F/15F v6.01 refines the NAVpilot Control Window in the Navigation data box and Instrument page with larger icons

More information

Sales Bulletin TZTL12F/15F. New Software v4.01. Model: Attention: All Furuno Distributors/Subsidiaries. SB No: FSB Number of Pages: 10

Sales Bulletin TZTL12F/15F. New Software v4.01. Model: Attention: All Furuno Distributors/Subsidiaries. SB No: FSB Number of Pages: 10 9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan www.furuno.co.jp Sales Bulletin Attention: All Furuno Distributors/Subsidiaries SB No: FSB16-0023 Number of Pages: 10 Date: November 10, 2016 Model: TZTL12F/15F

More information

Zeus 2 QuickStart Guide

Zeus 2 QuickStart Guide Zeus QuickStart Guide Font panel 7 units 9 & units 5 6 4 9 7 4 MARK 5 6 7 7 MARK 8 No. Description Touch screen Rotary knob. Rotate to scroll through menu items, then press to confirm a selection. Rotate

More information

TZTL12F/TZTL15F/TZT2BB Operator s Guide

TZTL12F/TZTL15F/TZT2BB Operator s Guide Operational Overview Home icon, power switch operations TZTL12F/TZTL15F Model MULTI FUNCTI DISPLAY TZTL12F/TZTL15F/TZT2BB Operator s Guide This guide provides the basic operating procedures for this equipment.

More information

New Remote Control Unit

New Remote Control Unit Model: MCU004 New Remote Control Unit 1. Specifications 1-1 Standard Comprising 1-2 Technical Specifications 2. Operation User Interface 2-1 Getting Started NavNet TZtouch/2 2-2 Keys and Functions Basic

More information

Vulcan. Getting Started ENGLISH. bandg.com

Vulcan. Getting Started ENGLISH. bandg.com Vulcan Getting Started ENGLISH bandg.com Vulcan Getting Started 3 4 Vulcan Getting Started Contents 9 Introduction 9 The Home page 10 Application pages 11 Integration of 3 rd party devices 12 GoFree wireless

More information

CZone Monitoring & Control

CZone Monitoring & Control CZone Monitoring & Control 1. Introduction 1-1 What is CZone? 1-2 System Overview 2. Setting Up CZone System 2-1 CZone System Confi guration 2-2 NavNet TZtouch2 Confi guration 3. Monitoring and Controlling

More information

Model: TZTL9/14/BB. Model: TZTL12F/15F TZT2BB. FUSION-Link Setup and Operation. (Edition 2)

Model: TZTL9/14/BB. Model: TZTL12F/15F TZT2BB. FUSION-Link Setup and Operation. (Edition 2) Model: TZTL9/14/BB Model: TZTL12F/15F TZT2BB FUSION-Link Setup and Operation (Edition 2) 1 Furuno NavNet TZtouch/2 and Fusion Stereos via FUSION-Link The MS700/750/755 series and the latest APOLLO series

More information

TimeZero Navigator 3.2

TimeZero Navigator 3.2 TimeZero Navigator 3.2 Table of Contents Welcome... 1 Getting Started... 2 Registering TimeZero... 2 Register using the My TIMEZERO Website... 2 Register directly from the Software... 3 Home Planning

More information

Nobeltec TimeZeroTrident v2.1.0

Nobeltec TimeZeroTrident v2.1.0 Nobeltec TimeZeroTrident v2.1.0 Table of Contents Welcome... 1 Getting Started... 2 Home Planning Vs Navigation... 2 Home Planning... 2 Navigation... 2 Chart Compatibility... 2 Installing Charts... 3 Chart

More information

GO XSE. Getting Started. ENGLISH

GO XSE. Getting Started.   ENGLISH GO XSE Getting Started ENGLISH www.simrad-yachting.com Contents 6 Introduction 6 The Home page 7 Application pages 9 Basic operation 9 System Controls dialog 9 Turning the system on and off 10 Selecting

More information

Pinch-To-Zoom. Multi Touch Control Wireless TimeZero Digital Revolution

Pinch-To-Zoom. Multi Touch Control Wireless TimeZero Digital Revolution Multi Touch Control Wireless TimeZero Digital Revolution Pinch-To-Zoom NavNet TZtouch brings you pinch-to-zoom capability, as well as other multi touch gestures for the most intuitive navigation experience.

More information

Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300

Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300 Electronic Chart Display and Information System (ECDIS) English Model Operator's Guide FMD-3200/FMD-3200-BB/FMD-3300 The purpose of this guide is to provide the basic operation for this equipment. For

More information

GO XSE Quick Guide. Front panel. The System controls dialog. No. Key Function

GO XSE Quick Guide. Front panel. The System controls dialog. No. Key Function GO XSE Quick Guide EN Front panel 1 No. Key Function 1 Power Press and hold to turn the unit ON/OFF. Press once to display the System control dialog. The System controls dialog Used for quick access to

More information

MULTI FUNCTION DISPLAY MFD8/MFD12

MULTI FUNCTION DISPLAY MFD8/MFD12 MULTI FUNCTION DISPLAY MFD8/MFD12 User's Handbook The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's manual. All brand and

More information

TimeZero Professional v3.2

TimeZero Professional v3.2 TimeZero Professional v3.2 Table of Contents Welcome... 1 Getting Started... 2 Registering TimeZero... 2 Register using the My TIMEZERO Website... 2 Register directly from the Software... 3 Home Planning

More information

GO XSE Quick Start Guide

GO XSE Quick Start Guide GO XSE Quick Start Guide EN Front panel 1 No. Key Function 1 Power Press once to display the System control dialog. Press and hold to turn the unit ON/OFF. The System controls dialog Used for quick access

More information

Zeus 2 Glass Helm QuickStart Guide

Zeus 2 Glass Helm QuickStart Guide Zeus 2 Glass Helm QuickStart Guide EN Turning on/off the Zeus 2 Glass Helm system Press the Power key/button: - on the front of the Zeus 2 processor - on the front of the monitor (depending on type of

More information

New Software v2.01 INDEX. Model: GP-1670/1670F. Model: GP-1870/1870F. 1. Wireless Solution (Model: GP-1870/F only)

New Software v2.01 INDEX. Model: GP-1670/1670F. Model: GP-1870/1870F. 1. Wireless Solution (Model: GP-1870/F only) Model: GP-1670/1670F Model: GP-1870/1870F New Software v2.01 1. Wireless Solution (Model: GP-1870/F only) 1-1 Weather Information by C-Weather 1-2 Chart Plotter Link by Plan2Nav App 1-3 Important Notice

More information

*Fixed: Requires a heading input to display AIS targets on a radar only display

*Fixed: Requires a heading input to display AIS targets on a radar only display NN3D V2.13 Software 1/2015 *Fixed: Requires a heading input to display AIS targets on a radar only display NN3D V2.12 Software 1/2015 *New: BBWX3 compatibility *New: Blue Force Tracking (BFT) compatibility

More information

Total Control, Simply Refined...

Total Control, Simply Refined... 9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan Phone: +81 (0)798 63-1071 / Fax: +81 (0)798 65-4200, 66-4622 www.furuno.co.jp Sales Bulletin Attention: All Furuno Distributors/Subsidiaries SB No: FSB15-0002

More information

Boating Tip #45: Chartplotters

Boating Tip #45: Chartplotters Boating Tip #45: Chartplotters As navigation technology has advanced, hand held GPS receivers have further evolved into chartplotters. Chartplotters graphically display a vessel s position, heading and

More information

NSS evo3 Quick Start Guide

NSS evo3 Quick Start Guide NSS evo3 Quick Start Guide EN Front panel 2 3 4 5 6 7 8 9 10 11 12 12 1 No. Description 1 Touch screen. Pages/Home key - press to open the Home page for page selection and setup 2 options. WheelKey - user

More information

GO XSE. Getting Started. simrad-yachting.com ENGLISH

GO XSE. Getting Started. simrad-yachting.com ENGLISH GO XSE Getting Started ENGLISH simrad-yachting.com Contents 7 Introduction 7 The Home page 8 Application pages 10 Basic operation 10 System Controls dialog 10 Turning the system on and off 11 Selecting

More information

TimeZero Professional v3.0

TimeZero Professional v3.0 TimeZero Professional v3.0 Table of Contents Welcome... 1 Getting Started... 2 Home Planning Vs. Navigation... 2 Home Planning... 2 Navigation... 2 Chart Compatibility... 2 Mapmedia.mm3d charts... 2 S57

More information

TRADEMARK REGISTERED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1201XSK Printed in Japan Catalogue No. R-201

TRADEMARK REGISTERED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1201XSK Printed in Japan Catalogue No. R-201 www.furuno.com All brand and product names are registered trademarks, trademarks or service marks of their respective holders. Alpha blending technology is used for transparency effects. TRADEMARK REGISTERED

More information

TZ Professional v3. The biggest TIMEZERO release ever!

TZ Professional v3. The biggest TIMEZERO release ever! TZ Professional v3 The biggest TIMEZERO release ever! New PBG Module New PBG Module Resolution has been doubled (now 1.5m x 1.5m) Automatic and real time extrapolation (no delay when customizing brush

More information

FLIR Camera Setup Procedures

FLIR Camera Setup Procedures Number of Pages: 18 Date: July 15, 2015 Model: TZTL9/14/BB Model: TZTL12F/15F FLIR Camera Setup Procedures 1 INDEX 1. Integration with FLIR M-Series 2. Network Overview 3. Setting up FLIR M-Series 3-1

More information

Zeus 2. Operator Manual ENGLISH. bandg.com

Zeus 2. Operator Manual ENGLISH. bandg.com Zeus 2 Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected

More information

Zeus 2. Operator Manual ENGLISH. bandg.com

Zeus 2. Operator Manual ENGLISH. bandg.com Zeus 2 Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected

More information

FMD-3200/FMD-3200-BB/FMD-3300

FMD-3200/FMD-3200-BB/FMD-3300 Operator's Guide The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's Manual. FMD-3200/FMD-3200-BB/FMD-3300 All brand and product

More information

SD, SDHC Logos are trademarks of SD-3C, LLC. RotoKey is a registered trademark or trademark of FURUNO Electric Co., Ltd.

SD, SDHC Logos are trademarks of SD-3C, LLC. RotoKey is a registered trademark or trademark of FURUNO Electric Co., Ltd. IMPORTANT NOTICES General This manual has been authored with simplified grammar, to meet the needs of international users. The operator of this equipment must read and follow the descriptions in this manual.

More information

CL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0

CL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0 CL7 DISPLAY QUICK START MANUAL 6YD-2819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview

More information

ADDENDUM GO XSE sw release 3.0

ADDENDUM GO XSE sw release 3.0 ADDENDUM GO XSE sw release 3.0 This addendum documents new features that are included in GO XSE software release 3.0 and that are not described in the GO XSE Operator manual or other documentation. Feature

More information

Total Control, Simply Refined

Total Control, Simply Refined Total Control, Simply Refined www.furuno.com Beware of similar products Apple, Apple logo, are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple

More information

NSS evo2. Operator Manual ENGLISH

NSS evo2. Operator Manual ENGLISH NSS evo2 Operator Manual ENGLISH Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version

More information

GN70/MX610/MX612 QuickStart Guide

GN70/MX610/MX612 QuickStart Guide GN70/MX610/MX612 QuickStart Guide EN The front panel 1 2 3 PAGE MENU 8 10 POS NAV 9 HDG AIS 11 4 5 6 ESC MOB 7 ENT USB 12 13 USB No. Description 1 PAGE key: Brings up different screen page every time this

More information

NSO evo2 QuickStart Guide

NSO evo2 QuickStart Guide NSO evo2 QuickStart Guide EN Turning the NSO evo2 system on and off Press the Power key/button: - on the front of the NSO evo2 Processor - on the front of the monitor (depending on type of monitor and

More information

Operation Manual. Simrad NSE8 and NSE12 Multi-function Displays. English. A brand by Navico - Leader in Marine Electronics.

Operation Manual. Simrad NSE8 and NSE12 Multi-function Displays. English. A brand by Navico - Leader in Marine Electronics. Operation Manual Simrad NSE8 and NSE12 Multi-function Displays English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Preface Disclaimer As Navico is continuously improving this

More information

MFDBB Multi Function Display

MFDBB Multi Function Display MFDBB Multi Function Display www.furuno.co.jp Important Notices The descriptions in this manual are intended for readers with a solid knowledge of English. No part of this manual may be copied or reproduced

More information

CL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0

CL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0 CL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview

More information

NSS evo3 Quick Start Guide

NSS evo3 Quick Start Guide NSS evo3 Quick Start Guide EN Front panel 2 3 4 5 6 7 8 9 10 11 12 12 1 No. Description 1 Touch screen. Pages/Home key - press to open the Home page for page selection and setup 2 options. WheelKey - user

More information

HDS Gen2 Touch Chartplotter Operator manual

HDS Gen2 Touch Chartplotter Operator manual HDS Gen2 Touch Chartplotter Operator manual ENGLISH lowrance.com Copyright 2013 Navico All Rights Reserved Lowrance and Navico are registered trademarks of Navico. Fishing Hot Spots is a registered trademark

More information

Explorer 3 w/o GPS antenna Multifunction chartplotter

Explorer 3 w/o GPS antenna Multifunction chartplotter Explorer 3 w/o GPS antenna Multifunction chartplotter Multifunction chartplotter. The Explorer 3 is yet another improvement of the most reliable and affordable controller in the world. Product Description

More information

MEDALLION INSTRUMENTATION SYSTEMS VIPER CHART PLOTTING OPERATORS MANUAL

MEDALLION INSTRUMENTATION SYSTEMS VIPER CHART PLOTTING OPERATORS MANUAL MEDALLION INSTRUMENTATION SYSTEMS VIPER CHART PLOTTING OPERATORS MANUAL TABLE OF CONTENTS Map Screen... 3 Squash Pad... 4 Navigation Menu Map View... 5 Orient View... 6 Select Course... 7 Creating a New

More information

Quick Reference Guide

Quick Reference Guide Quick Reference Guide Zeus MFDs 2 4 6 5 7 8 10 1 11 CHART RADAR ECHO NAV INFO EN IN OUT 1MOB 2 ABC 4 GHI DEF 5 JKL 6 MNO 7 PQRS 8 TUV 9WXYZ STBY AUTO 0 9 12 1 PAGES 1 Direct Access Keys (DAK). Provide

More information

NavNet TZtouch brings you pinch-to-zoom capability, as well as other multi touch gestures for the most intuitive navigation experience.

NavNet TZtouch brings you pinch-to-zoom capability, as well as other multi touch gestures for the most intuitive navigation experience. Multi Touch Control Wireless TimeZero Digital Revolution Pinch-To-Zoom NavNet TZtouch brings you pinch-to-zoom capability, as well as other multi touch gestures for the most intuitive navigation experience.

More information

GETTING STARTED. Link Controller. Remote

GETTING STARTED. Link Controller. Remote GETTING STARTED i-pilot Link Controller Software Updates Link Controller 1. Loading the software file onto the SD card. Note that no other software loads (FF or remote) can be on the card. 2. Prep the

More information

Vulcan. Operator Manual ENGLISH. bandg.com

Vulcan. Operator Manual ENGLISH. bandg.com Vulcan Operator Manual ENGLISH bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected

More information

Manual. Simrad AP26 and AP27 Autopilots for Volvo Penta IPS system

Manual. Simrad AP26 and AP27 Autopilots for Volvo Penta IPS system Manual Simrad AP26 and AP27 Autopilots for Volvo Penta IPS system English Sw.1.2 www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics Instruction manual Instruction Manual This manual

More information

NAVpilot-700/711/711C. Yamaha Helm Master Interface

NAVpilot-700/711/711C. Yamaha Helm Master Interface Model: NAVpilot-700/711/711C Yamaha Helm Master Interface INDEX 1. Yamaha Helm Master 1-1 What is Yamaha Helm Master? 1-2 Helm Master Network via Helm Master IF Kit Model FAP-6310 2. Yamaha Helm Master

More information

NSO evo2. Operator Manual ENGLISH.

NSO evo2. Operator Manual ENGLISH. NSO evo2 Operator Manual ENGLISH www.simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not

More information

HDS Gen2 RTM 3.5 software update

HDS Gen2 RTM 3.5 software update HDS Gen2 RTM 3.5 software update The HDS RTM 3.5 software update enables autopilot control of the MotorGuide Xi5 trolling motor via the Lowrance SmartSteer interface. MotorGuide Xi5 trolling motor To use

More information

HELIX SERIES. Operations Summary Guide

HELIX SERIES. Operations Summary Guide HELIX_Operations_Summary_Guide_532403-3EN_C.qxp_Layout 1 8/30/18 10:01 AM Page A HELIX SERIES Operations Summary Guide SAFETY INFORMATION! You must read the Important Information about your Humminbird

More information

ADDENDUM GO7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5

ADDENDUM GO7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 *988-11573-001* ADDENDUM GO7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 This addendum documents new features that are included in GO7 software releases 1.1, 2.0, 2.5, 3.0 and 3.5, and that are not described

More information

AP70/AP80 Operator Manual

AP70/AP80 Operator Manual AP70/AP80 Operator Manual ENGLISH navico.com/commercial Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not

More information

Handling Mapmedia Charts

Handling Mapmedia Charts Handling Mapmedia Charts 1. Overview 1-1 Reading Charts 1-2 System ID and Chart Master Setting 1-3 Catalog Page 1-5 Arranging Unlock Codes 1-6 Unlocking Charts 2. Chart Ordering and Unlocking Flow 1. Overview

More information

HDS Carbon Operator Manual

HDS Carbon Operator Manual HDS Carbon Operator Manual ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be

More information

B. HDS-5m & HDS-7m. GPS Mapping Receiver. Operations Guide

B. HDS-5m & HDS-7m. GPS Mapping Receiver. Operations Guide 988-0176-02B HDS-5m & HDS-7m GPS Mapping Receiver Operations Guide Software updates for your unit. Occassionally check the Lowrance website for free software upgrades for your unit. Go to www.lowrance.com

More information

STRIKER PLUS 4/5/7/9. Owner s Manual

STRIKER PLUS 4/5/7/9. Owner s Manual STRIKER PLUS 4/5/7/9 Owner s Manual 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of

More information

HDS Gen2 Touch. Operator manual. lowrance.com ENGLISH

HDS Gen2 Touch. Operator manual. lowrance.com ENGLISH HDS Gen2 Touch Operator manual ENGLISH lowrance.com Copyright 2012 Navico All Rights Reserved Lowrance and Navico are registered trademarks of Navico. Fishing Hot Spots is a registered trademark of Fishing

More information

OCEAN 7T. Technical presentation (ENGLISH) FURUNO ELECTRIC CO., LTD. All Rights Reserved.

OCEAN 7T. Technical presentation (ENGLISH) FURUNO ELECTRIC CO., LTD. All Rights Reserved. OCEAN 7T Technical presentation (ENGLISH) Software technology Navigation software has been designed to make the most of Radio Ocean marine plotters. Works in Multi-Touch Screen Jeppesen charting technology

More information

R5 SUPREME SW Release notes

R5 SUPREME SW Release notes Table of contents 1 R5 SUPREME CDU SW release history... 4 1.1 SW 1.2.6 (2018-05-04)... 4 1.1.1 Compatibility... 4 1.1.2 List of changes... 4 1.2 SW 1.2.5 (2017-03-12)... 4 1.2.1 Compatibility... 4 1.2.2

More information

Chapter 2: Installation. ST80 Multiview. Operation & Setup

Chapter 2: Installation. ST80 Multiview. Operation & Setup Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. Chapter 2: Installation 1 ST80 Multiview

More information

HDS Gen2 RTM 2.0, 2.5 & 3.0 addendum

HDS Gen2 RTM 2.0, 2.5 & 3.0 addendum HDS Gen2 RTM 2.0, 2.5 & 3.0 addendum This addendum documents new features included in the HDS Gen2 2.0, 2.5 and 3.0 software updates. These features are not described in the HDS Gen2 Operation manual.

More information

AP70 MK2 Operator Manual

AP70 MK2 Operator Manual AP70 MK2 Operator Manual ENGLISH navico-commercial.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not

More information

MEDALLION INSTRUMENTATION SYSTEMS MasterCraft Viper system

MEDALLION INSTRUMENTATION SYSTEMS MasterCraft Viper system MEDALLION INSTRUMENTATION SYSTEMS 2010 MasterCraft Viper system MEDALLION INSTRUMENTATION SYSTEMS VIPER CHART PLOTTING OPERATORS MANUAL MAP SCREEN This manual will attempt to familiarize the

More information

HOOK2 Quick Guide. 5 HDI, 5 TS, 7x GPS TS, 7 HDI, 7 TS, 9 HDI, 9 TS and 12 TS models. Front controls

HOOK2 Quick Guide. 5 HDI, 5 TS, 7x GPS TS, 7 HDI, 7 TS, 9 HDI, 9 TS and 12 TS models. Front controls HOOK Quick Guide 5 HDI, 5 TS, 7x GPS TS, 7 HDI, 7 TS, 9 HDI, 9 TS and 1 TS models Front controls EN 1 3 4 5 6 7 1 Pages Press to activate the Home page. Press to zoom the image. Zoom in/ Press both keys

More information

GO7. Operator Manual ENGLISH. simrad-yachting.com

GO7. Operator Manual ENGLISH. simrad-yachting.com GO7 Operator Manual ENGLISH simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected

More information

GO XSE. Operator Manual. ENGLISH

GO XSE. Operator Manual.   ENGLISH GO XSE Operator Manual ENGLISH www.simrad-yachting.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not

More information

Hook2 X Series. Operator Manual. 4x GPS, 4x Sonar, 5x GPS HDI, 7x GPS HDI ENGLISH

Hook2 X Series. Operator Manual.  4x GPS, 4x Sonar, 5x GPS HDI, 7x GPS HDI ENGLISH Hook2 X Series Operator Manual 4x GPS, 4x Sonar, 5x GPS HDI, 7x GPS HDI ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes

More information

Chart Plotter USER MANUAL

Chart Plotter USER MANUAL Chart Plotter USER MANUAL 1. Disclaimer and warnings 5 2. Introduction 6 2.1 Keyboard 6 2.2 Connections scheme 7 3. Getting started 10 3.1 Switching ON 10 3.2 Switching OFF 10 3.3 First Setup page 10

More information

CS68 ECDIS Operator Manual ENGLISH

CS68 ECDIS Operator Manual ENGLISH CS68 ECDIS Operator Manual ENGLISH OPERATOR MANUAL SIMRAD CS68 ECDIS Chart System 988-10707-001 English About this document Copyright 2014 Navico Holding AS. All rights reserved. No part of this work covered

More information

ADDENDUM Vulcan sw releases 1.1, 2.0, 2.5 and 3.0

ADDENDUM Vulcan sw releases 1.1, 2.0, 2.5 and 3.0 *988-11186-001* ADDENDUM Vulcan sw releases 1.1, 2.0, 2.5 and 3.0 www.bandg.com This addendum documents new features that are included in Vulcan software releases 1.1, 2.0, 2.5 and 3.0, and that are not

More information

OPERATOR MANUAL. SIMRAD CS68 ECDIS Chart System

OPERATOR MANUAL. SIMRAD CS68 ECDIS Chart System OPERATOR MANUAL SIMRAD CS68 ECDIS Chart System 20221925E English About this document Rev Date Written by Checked by Approved by A B C D E 070205 First issue. Applies to software version 1.1.xx. 301105

More information

Simrad Marine Electronics. Setup and Commissioning Instructions for Boatbuilders and Dealers

Simrad Marine Electronics. Setup and Commissioning Instructions for Boatbuilders and Dealers Simrad Marine Electronics Setup and Commissioning Instructions for Boatbuilders 18_8_2010 1. Introduction and Contents The purpose of this document is to set out, in clear and simple instructions, the

More information

VIDEO PLOTTER RP-250

VIDEO PLOTTER RP-250 VIDEO PLOTTER RP-250 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 fax : 0798-65-4200 ( DAMI All rights reserved. PUB.No. OME-30470 ) RP-250 Printed in Japan FIRST

More information

Feature Guide: TECDIS 4.7.x.30

Feature Guide: TECDIS 4.7.x.30 Feature Guide: TECDIS 4.7.x.30 With the release of TECDIS 4.7.x.30 we are providing you with over 40 new features and bug fixes. The most noticeable changes in this release are the design changes to make

More information

VIDEO PLOTTER RP-250

VIDEO PLOTTER RP-250 VIDEO PLOTTER RP-250 Back Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2 fax 0798-65-4200 : All rights reserved. Printed in Japan FIRST EDITION : AUG. 2002 G PUB.No.

More information

COLOR GPS/PLOTTER GP-3500

COLOR GPS/PLOTTER GP-3500 COLOR GPS/PLOTTER GP-3500 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 fax : 0798-65-4200 ( HIMA All rights reserved. PUB.No. OME-44210 ) GP-3500 Printed in Japan

More information

Wireless Solution by v2.01

Wireless Solution by v2.01 9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan Phone: +81 (0)798 63-1071 / Fax: +81 (0)798 65-4200, 66-4622 www.furuno.co.jp Sales Bulletin Attention : All Furuno Distributors/Subsidiaries Date : July

More information

Maris ECDIS900 System. Operator Manual ENGLISH.

Maris ECDIS900 System. Operator Manual ENGLISH. Maris ECDIS900 System Operator Manual ENGLISH http://www.navico-commercial.com/ Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product

More information

Hook2 Series. Operator Manual. 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH

Hook2 Series. Operator Manual.   5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH Hook2 Series Operator Manual 5 HDI, 5 TS, 7X GPS TS, 7 HDI, 7 TS, 9 TS, 9 HDI, and 12 TS ENGLISH www.lowrance.com Preface Disclaimer As Navico is continuously improving this product, we retain the right

More information

Handheld GPS Connection Kit _A

Handheld GPS Connection Kit _A Handheld GPS Connection Kit 531324-2_A Thank You! Thank you for choosing Humminbird, the #1 name in marine electronics. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly

More information

The software and release notes can be downloaded from US/Support/Downloads/.

The software and release notes can be downloaded from   US/Support/Downloads/. TB-97891 / October 4, 2017 NSS evo3 2.0 Software Update Product: NSS evo3 Multifunction displays Product Description: All NSS evo3 sizes Software Version: NSS_evo3-2.0-57.2.69-Standard-1.upd Effective

More information

Feature Guide: TECDIS 4.7.x.31

Feature Guide: TECDIS 4.7.x.31 Feature Guide: TECDIS 4.7.x.31 Creators of TECDIS With the release of TECDIS 4.7.x.31 we are providing you with a few bug fixes and stability improvements. For a complete list of changes, see the release

More information

Table of Contents pg " Display pg Cruise Mode pg Map Screen pg Stereo Screen pg Depth Screen pg.

Table of Contents pg  Display pg Cruise Mode pg Map Screen pg Stereo Screen pg Depth Screen pg. USER GUIDE TABLE OF CONTENTS Table of Contents pg. 2 12.3" Display pg. 3-4 Cruise Mode pg. 5-6 Map Screen pg. 6-13 Stereo Screen pg. 14-17 Depth Screen pg. 17 Settings Screen pg. 18-24 Media Screen pg.

More information

Handheld GPS Connection Kit _D

Handheld GPS Connection Kit _D Handheld GPS Connection Kit 531324-1_D Thank You! Thank you for choosing Humminbird, America s #1 name in fishfinders. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly

More information

2. Enhancement: Plotter Mode "NO DETAILS AVAILABLE" window dwell time has been reduced from five to three seconds.

2. Enhancement: Plotter Mode NO DETAILS AVAILABLE window dwell time has been reduced from five to three seconds. ******CDUpdate Navionics/C-MapNT****** Navionics V25 CMap V21 BB v1.09: Date: 4/4/2007 For use with new Ocher colored 8MB ROM cards *** See FQ4-2007-003 for complete information Navionics V24 CMap V20:

More information

OPERATOR'S MANUAL REMOTE DISPLAY RD-33. True.

OPERATOR'S MANUAL REMOTE DISPLAY RD-33. True. REMOTE DISPLAY RD-33 OPERATOR'S MANUAL True www.furuno.com The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN

More information

Pinch-To-Zoom. Multi Touch Control Wireless TimeZero Digital Revolution

Pinch-To-Zoom. Multi Touch Control Wireless TimeZero Digital Revolution Multi Touch Control Wireless TimeZero Digital Revolution Pinch-To-Zoom TZtouch brings you pinch-to-zoom capability, as well as other multi touch gestures for the most intuitive navigation experience. See

More information

Quick Start: GeoDAS-LT with Single Beam Echo Sounder

Quick Start: GeoDAS-LT with Single Beam Echo Sounder Quick Start: GeoDAS-LT with Single Beam Echo Sounder I. Setting up GeoDAS-LT for Single Beam Echo Sounder Survey 1. Connect your single beam echo sounder, GPS receiver and other sensors (e.g. gyro and

More information

ADDENDUM Vulcan7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5

ADDENDUM Vulcan7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 *988-11562-001* ADDENDUM Vulcan7 sw releases 1.1, 2.0, 2.5, 3.0 and 3.5 This addendum documents new features that are included in Vulcan7 software releases 1.1, 2.0, 2.5, 3.0 and 3.5, and that are not

More information

INSTRUCTION MANUAL SETTING AND ADJUSTMENTS FCR-2119-BB/2129-BB/2139S-BB/ 2819/2829/2839S/2829W/2839SW

INSTRUCTION MANUAL SETTING AND ADJUSTMENTS FCR-2119-BB/2129-BB/2139S-BB/ 2819/2829/2839S/2829W/2839SW INSTRUCTION MANUAL SETTING AND ADJUSTMENTS Model FMD-3200/3200-BB/3300 FCR-2119-BB/2129-BB/2139S-BB/ 2819/2829/2839S/2829W/2839SW This manual is solely for use by the installer. Under no circumstances

More information

General Guide. Welcome to Buster Q! Overview. Quick Start. Available Applications. Technology. Application icons:

General Guide. Welcome to Buster Q! Overview. Quick Start. Available Applications. Technology. Application icons: General Guide en Welcome to Buster Q! To facilitate a new way of boating, Buster Boats has completely rethought the way you interact with the boat. Inspired by the automotive and smartdevice industries,

More information

PacTracs 2.0 Quick Start Guide

PacTracs 2.0 Quick Start Guide PacTracs 2.0 Quick Start Guide If this Quick Start Guide or the Help menu does not provide the information needed, call the Marine Exchange s 24 hour Operations Center and our watchstander will provide

More information

2019/01/13 20:06 1/14 Create Route

2019/01/13 20:06 1/14 Create Route 2019/01/13 20:06 1/14 Create Route Create Route Route Concepts Create A Route Modify a Route Multiple Routes Exporting and Importing Routes and Marks Activate Route & Active Route Console Active Route

More information

FICE-100 Ice Radar FOIL-200 Oil Radar

FICE-100 Ice Radar FOIL-200 Oil Radar FICE-100 Ice Radar FOIL-200 Oil Radar OPERATORS MANUAL Furuno Finland Oy www.furuno.fi TABLE OF CONTENTS FOREWORD 4 FICE-100 5 SYSTEM CONFIGURATION 6 1. GRAPHICAL USER INTERFACE (GUI) 7 1.1 Operating mode

More information

SmartController. User guide. English Date: Document number: EN 2006 Raymarine UK Limited

SmartController. User guide. English Date: Document number: EN 2006 Raymarine UK Limited SmartController User guide English Date: 06-2006 Document number: 81243-4-EN 2006 Raymarine UK Limited Getting Started How do I power the unit on/off?... 7 Keylock... 7 Using your SmartController How

More information

M A N U A L Simrad CE33 ChartSounder

M A N U A L Simrad CE33 ChartSounder M A N U A L Simrad CE33 ChartSounder 183-2100-702 02181.11 Note! Insert or remove C-MAP cartridges ONLY through CHART menu or when unit is off. All electronic navigation equipment is subject to external

More information