TITLE: GLASS GOBLET. Software: Serif DrawPlus X8. Author: Sandra Jewry. Website: Draw Plus Tutorials by San. Skill Level: Beginner.
|
|
|
- Harvey White
- 5 years ago
- Views:
Transcription
1 TITLE: GLASS GOBLET Software: Serif DrawPlus X8 Author: Sandra Jewry Website: Draw Plus Tutorials by San Skill Level: Beginner Supplies: None Description: This is a very easy beginner tutorial that shows you how to create a realistic looking glass goblet and uses a nice variety of tools while doing so. LET S GET STARTED Open a new Drawing. Go to Page Setup on the Context Toolbar and change the Units to Pixels. Set the Width and Height both to 800 pixels. Choose a colour of your choice for the background. Some people like to work on dark colours while others like to work on a light colour. Since you are going to be using the Transparency tool it is good idea to work with something other than a white background. If you are not happy with the colour you have chosen you can change it any time it. It does not effect your drawing. THE GOBLET BOWL 1. Set your Line colour to None and the Fill to a dark colour of your choosing. This tutorial is using the blue from the Documents Palette under the Swatch tab. 2. Select the Quick badge from the QuickShapes on the Drawing Toolbar. 3. Draw out a Quick badge height about 230 and width about 260 pixels. 4. Right click and Convert to Curves. 5. On the Drawing Toolbar, select the Node tool. 6. Click on the bottom node. Refer image 1. Then on the Context Toolbar, click on Smart Corner. Drag the left handle out a fraction then do exactly the same to right handle so it looks similar to the image below. Refer image 2.
2 7. Click anywhere on the workspace to deselect. 8. Click on the ruler at the top and pull down a guide line to sit on top of your shape. 9. Select the Quick Ellipse from the Quick Shapes. Draw out an ellipse height about 100 and width about 255 pixels. 10. Using the Pointer tool, position your ellipse above the bowl as shown on the image on the right. Line the middle points up with the guide line and make sure the right side and the left line up with the top of the bowl. 11. Once you have the ellipse in place and it is still selected right click and Copy, right click and Paste. Move the top ellipse to the work space away from your image. Click on your work space to deselect the ellipse. 12. Select the Pointer tool and drag a box around both images (the bowl and the ellipse). On the Align tab, click the Subtract icon. This will remove the the ellipse leaving a cut-away on the bowl. Now we have the shape of the bowl of the glass goblet.
3 13. Drag your copied ellipse back to where you have just deleted the other one. Place it with the end nodes just under the guide line. This will now become the inside of the glass goblet bowl. 14. To adjust any gaps between the ellipse and the bowl shape, right click and select Convert to Curves. Using the Node tool, click on the left node then adjust with the handle. Refer image 1. Pull it down and to the left a bit so it sits on top of the bowl. Refer image To adjust the right node, do the same with the handle by pulling it out and to the right a bit. THE GOBLET STEM 1. Select the Quick Rectangle From the QuickShapes on the Drawing Toolbar. Below your bowl, draw a rectangle about 40 pixels wide and height 260 pixels. While it is still selected, right click and click on Convert to Curves. 2. Select the Node Tool. With the shape still selected, drag a box on the page around your rectangle to create a selection marquee which selects all the four nodes. 3. With the four nodes selected, on the Context Toolbar choose Sharp Corner. 4. Drag each handle in towards the centre so it curves in like the image. I have changed the colour on the stem so the nodes show up better. 5. Click on your work space to deselect the Node tool. 6. With the Pointer Tool select all your objects. Right click and select Align Objects and choose Horizontally Centre. Click OK.
4 7. Select your Node tool again click on the stem. Now with the upward arrow on your keyboard, move the stem upward so it just sits on the bottom of your bowl. 8. Next click the left node. Refer image 1. Then drag the left and right handles down a little bit so the stem sits on the base of the bowl. Refer image Click anywhere on the work space and deselect. THE GOBLET BASE 1. Now to make the base. Click the ellipse on the inside of the bowl. Right click Copy, right click, Paste. Using the Pointer tool, drag the copy of the ellipse down below the stem. 2. While the ellipse is still selected, click Send to Back on the Standard Toolbar. 3. With the Pointer tool, select all your objects. Right click and select Align Objects and choose Horizontally Centre. 4. Now would be a good time to save your glass objects to your gallery for future use. SETTING THE TRANSPARENCY 1. Select the inside of the bowl with the Pointer Tool. 2. Click the Transparency tool on the Drawing Toolbar. 3. Click on the workspace and drag across the inside of the bowl. As you can see it takes a simple linear grading from 0% opaque to a 100% opaque in the direction you drag. 4. You can adjust the path of the transparency by adding an extra handle along the path as shown in the image. To Add another handle on the transparency path, click when you see the Fill Pot. 5. Drag the new handle up towards the top of the inside of the cup to give it a bit more complex transparency. Note: To delete a handle added on the transparency path, click the handle, then press delete on your keyboard.
5 6. Click anywhere on your workspace to deselect. 7. With the Pointer tool select the bowl. Next click on the Transparency tool. Click on the workspace drag across the bowl. 8. Click anywhere on your workspace to deselect. 9. Now we will merge the base and the stem in to one shape. 10. On the Drawing toolbar, click on the Shape Builder tool. Click on your base and drag upwards over part of the stem until the base and stem are the same color Next click on the Pointer tool and select the stem and base. 12. To add transparency to the stem, click the Transparency tool, then click on the work space and drag across the stem. 13. Click anywhere on your workspace to deselect. THE FINISHING TOUCHES 1. Select the bowl with your Pointer Tool. 2. On the right side of your work space find the Styles Tab. Click the Down arrow and from the drop-down list select Bevels. Scroll down until you find 3D. Click on Large Bottom Right to apply the 3D effect. 3. On the Drawing toolbar, select Effects tool. The dialog Box will open. Change the 3D Effects Blur to 30 and click OK. 4. While you still have your bowl selected, click on the Format Painter on the Standard toolbar, then click anywhere on the stem. The effects from the bowl are now transferred to the stem and the base. 5. Click anywhere in the workspace to deselect. 6. Now that you ve completed your glass goblet, all that s left to do is save it! With the Pointer tool select your objects and export as a PNG. Hope you enjoyed this tutorial and you have lots of pleasure making different goblets with this tutorial.
6 Samples of the same goblet using different effects. Using Metallic effects By San Filled Goblet By Teejay Using Bitmap Patterns By MaryLou You're invited to join the PIRCForum. This is an active forum for PaintShopPro and DrawPlus users. You'll find a wonderful group of warm, friendly, talented, and knowledgeable people who are ready and willing to share their expertise with you. There are creative activities for all skill levels. This forum is "family friendly", 100% free, and everyone is welcome. Copyright San. This document may not be translated, duplicated, redistributed or otherwise appropriated without permission.
Description: Learn how to create a beautiful pumpkin using Bitmaps for Textures and the Gradient Fill Editor to colour the shapes.
Title: PUMPKIN Software: Serif DrawPlus X8 Author: Teejay Joyce Website: Tutorials by Teejay Skill Level: Intermediate Supplies: None Description: Learn how to create a beautiful pumpkin using Bitmaps
Unit 21 - Creating a Navigation Bar in Macromedia Fireworks
Unit 21 - Creating a Navigation Bar in Macromedia Fireworks Items needed to complete the Navigation Bar: Unit 21 - House Style Unit 21 - Graphics Sketch Diagrams Document ------------------------------------------------------------------------------------------------
How to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
On the Web sun.com/aboutsun/comm_invest STAROFFICE 8 DRAW
STAROFFICE 8 DRAW Graphics They say a picture is worth a thousand words. Pictures are often used along with our words for good reason. They help communicate our thoughts. They give extra information that
Fig. A. Fig. B. Fig. 1. Fig. 2. Fig. 3 Fig. 4
Create A Spinning Logo Tutorial. Bob Taylor 2009 To do this you will need two programs from Xara: Xara Xtreme (or Xtreme Pro) and Xara 3D They are available from: http://www.xara.com. Xtreme is available
DrawPlus X8. Quick Start Guide. Simple steps for getting started with your drawing.
DrawPlus X8 Quick Start Guide Simple steps for getting started with your drawing. In this guide, we will refer to specific tools, toolbars and tabs. Use this visual reference to help locate them on the
Adding Objects Creating Shapes Adding. Text Printing and Exporting Getting Started Creating a. Creating Shapes Adding Text Printing and Exporting
Getting Started Creating a Workspace Pages, Masters and Guides Adding Objects Creating Shapes Adding Text Printing and Exporting Getting Started Creating a Workspace Pages, Masters and Guides Adding Objects
Using Blending Modes for Simple Color Correction
Using Blending Modes for Simple Color Correction In a previous lesson, you were introduced to blending modes using the Brush Tool. Blending modes are also a powerful feature of the Layers Panel and can
Introduction to Microsoft Word
Chapter Microsoft Word is a powerful word processing program that allows you to enter text, make changes to it, format it, record and print it. You can use it to produce professional business letters,
Create a Swirly Lollipop Using the Spiral Tool Philip Christie on Jun 13th 2012 with 12 Comments
Advertise Here Create a Swirly Lollipop Using the Spiral Tool Philip Christie on Jun 13th 2012 with 12 Comments Tutorial Details Program: Adobe Illustrator CS5 Difficulty: Beginner Es timated Completion
ITEC185. Introduction to Digital Media
ITEC185 Introduction to Digital Media ADOBE ILLUSTRATOR CC 2015 What is Adobe Illustrator? Adobe Illustrator is a program used by both artists and graphic designers to create vector images. These images
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons The Inkscape Program Inkscape is a free, but very powerful vector graphics program. Available for all computer formats
Artistic Text. Basics 1
Basics 1 In this tutorial, we ll show you how to: Work with artistic text. Create, edit, and format text. Apply shadows, reflections, and other text effects. Create shaped text (or text-on-a-path). 2 Basics
Microsoft Visio Working with Shapes
Working with Visio Shapes Shape is the general term for the objects you will find on a stencil and objects created using the drawing tools. These include geometric shapes such as rectangles, triangles
EDITING SHAPES. Lesson overview
3 CREATING AND EDITING SHAPES Lesson overview In this lesson, you ll learn how to do the following: Create a document with multiple artboards. Use tools and commands to create basic shapes. Work with drawing
A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)
A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.
Using Adobe Photoshop
Using Adobe Photoshop 2 In this section we ll look at some essential things you need to know in order to use Photoshop effectively. First of all, we ll take a look at customising Photoshop s settings and
SETTINGS AND WORKSPACE
ADOBE ILLUSTRATOR Adobe Illustrator is a program used to create vector illustrations / graphics (.ai/.eps/.svg). These graphics will then be used for logos, banners, infographics, flyers... in print and
creating files and saving for web
creating files and saving for web the template files assume a default image size of 300 x 300 pixels images intended for the web should be produced in rgb mode name your images in a logical format, so
Section 5. Pictures. By the end of this Section you should be able to:
Section 5 Pictures By the end of this Section you should be able to: Use the Clip Gallery Insert and Delete Pictures Import Pictures Move, Resize and Crop Pictures Add Borders and Colour Wrap Text around
Expression Design Lab Exercises
Expression Design Lab Exercises Creating Images with Expression Design 2 Beaches Around the World (Part 1: Beaches Around the World Series) Information in this document, including URL and other Internet
Making a Portrait From a Snapshot by Phil Russell
Making a Portrait From a Snapshot by Phil Russell Wouldn t it be nice if you had a great snapshot of a friend that you could turn it into a studio portrait? With Photoshop 6 and 7, it is fairly simple.
HO-1: INTRODUCTION TO FIREWORKS
HO-1: INTRODUCTION TO FIREWORKS The Fireworks Work Environment Adobe Fireworks CS4 is a hybrid vector and bitmap tool that provides an efficient design environment for rapidly prototyping websites and
MAKING A TRIPTYCH IN PHOTOSHOP CC
MAKING A TRIPTYCH IN PHOTOSHOP CC Open Photoshop CC and create a New Document Remember, the images shown here are 'screen grabs from my computer. I am using Photoshop CC. Therefore your screen may look
Lesson 8: Presentation Enhancements Microsoft PowerPoint 2016
Lesson 8: Presentation Enhancements Microsoft PowerPoint 2016 IN THIS CHAPTER, YOU WILL LEARN HOW TO Set up presentations for delivery. View and change slide masters. Add WordArt text. Create hyperlinks.
Transforming Selections In Photoshop
Transforming Selections In Photoshop Written by Steve Patterson. In previous tutorials, we learned how to draw simple shape-based selections with Photoshop s Rectangular and Elliptical Marquee Tools. Using
Inkscape tutorial: Donate button
Inkscape tutorial: Donate button By: Very Simple Designs (BDT466) Web Site: http://verysimpledesigns.com/vectors/inkscape-tutorial-donate-button.html This Inkscape beginner tutorial teaches the viewer
SNOWFLAKES PHOTO BORDER - PHOTOSHOP CS6 / CC
Photo Effects: Snowflakes Photo Border (Photoshop CS6 / CC) SNOWFLAKES PHOTO BORDER - PHOTOSHOP CS6 / CC In this Photoshop tutorial, we ll learn how to create a simple and fun snowflakes photo border,
Learning Microsoft Word By Greg Bowden. Chapter 10. Drawing Tools. Guided Computer Tutorials
Learning Microsoft Word 2007 By Greg Bowden Chapter 10 Drawing Tools Guided Computer Tutorials www.gct.com.au PUBLISHED BY GUIDED COMPUTER TUTORIALS PO Box 311 Belmont, Victoria, 3216, Australia www.gct.com.au
Overview of Adobe Fireworks
Adobe Fireworks Overview of Adobe Fireworks In this guide, you ll learn how to do the following: Work with the Adobe Fireworks workspace: tools, Document windows, menus, and panels. Customize the workspace.
01 - Basics - Toolbars, Options and Panels
InDesign Manual 01 - Basics - Toolbars, Options and Panels 2017 1st edition This InDesign Manual is one of an introductory series specially written for the Arts and Humanities Students at UEA by the Media
Drawing shapes and lines
Fine F Fi i Handmade H d d Ch Chocolates l Hours Mon Sat 10am 6pm In this demonstration of Adobe Illustrator CS6, you will be introduced to new and exciting application features, like gradients on a stroke
Using Adobe Photoshop
Using Adobe Photoshop 2 In this section we ll look at some essential things you need to know in order to use Photoshop effectively. First of all, we ll take a look at customising Photoshop s settings and
Note: Photoshop tutorial is spread over two pages. Click on 2 (top or bottom) to go to the second page.
Introduction During the course of this Photoshop tutorial we're going through 9 major steps to create a glass ball. The main goal of this tutorial is that you get an idea how to approach this. It's not
Unit 21 - Creating a Button in Macromedia Flash (simplified)
Unit 21 - Creating a Button in Macromedia Flash (simplified) Items needed to complete the Navigation Bar: Unit 21 - House Style Unit 21 - Graphics Sketch Diagrams Document ------------------------------------------------------------------------------------------------
Using Microsoft Excel
Using Microsoft Excel Formatting a spreadsheet means changing the way it looks to make it neater and more attractive. Formatting changes can include modifying number styles, text size and colours. Many
SketchUp Starting Up The first thing you must do is select a template.
SketchUp Starting Up The first thing you must do is select a template. While there are many different ones to choose from the only real difference in them is that some have a coloured floor and a horizon
Create and edit text. Create the title text First you ll create the title text for the car rental ad.
8 Choose the Pointer tool and click the mask thumbnail in the Layers panel. The Property inspector shows that the mask was applied using its grayscale appearance. The darker pixels in the mask knock out
Correcting Grammar as You Type
PROCEDURES LESSON 11: CHECKING SPELLING AND GRAMMAR Selecting Spelling and Grammar Options 2 Click Options 3 In the Word Options dialog box, click Proofing 4 Check options as necessary under the When correcting
Add Photo Mounts To A Photo With Photoshop Part 1
Add Photo Mounts To A Photo With Photoshop Part 1 Written by Steve Patterson. In this Photoshop Effects tutorial, we ll learn how to create and add simplephoto mounts to an image, a nice finishing touch
Bold, Italic and Underline formatting.
Using Microsoft Word Character Formatting You may be wondering why we have taken so long to move on to formatting a document (changing the way it looks). In part, it has been to emphasise the fact that
Work with RSS Feeds. Procedures. Add an RSS Text Object CHAPTER. Procedures, page 7-1
CHAPTER 7 Revised: November 15, 2011 s, page 7-1 s Add an RSS Text Object, page 7-1 Rename an RSS Text Object, page 7-2 Delete or Restore an RSS Text Object, page 7-4 Manipulate an RSS Text Object, page
Chapter 1. Getting to Know Illustrator
Chapter 1 Getting to Know Illustrator Exploring the Illustrator Workspace The arrangement of windows and panels that you see on your monitor is called the workspace. The Illustrator workspace features
An Animated Scene. Pick a color for the street. Then use the Paint can to fill the lower part of the page with grass.
An Animated Scene In this project, you create a simple animated scene with graphics, a bit of text, a simple animation and some music. Click on the Steps below and be creative! Remember: if you must leave
Master Pages. Basics 1
Basics 1 Some elements of your design will appear on every page of your publication. For a professional look, these elements should be placed consistently from page to page. By using master pages, you
Working with Tables in Microsoft Word
Working with Tables in Microsoft Word Microsoft Word offers a number of ways to make a table. The best way depends on how you like to work, and on how simple or complex the table needs to be. 1. Click
From the dock at the left, right, top, or bottom of your monitor screen, open the Finder.
GETTING STARTED Composition & Defamiliarization: Using Adobe Illustrator as a Tool Kristen Foster 2010 Drawing and Composition Module OTIS College of Art and Design Trash preferences + Open Illustrator
Using Microsoft Word. Tables
Using Microsoft Word are a useful way of arranging information on a page. In their simplest form, tables can be used to place information in lists. More complex tables can be used to arrange graphics on
Adobe Illustrator A Hot Air Balloon Sky Scene In this tutorial, we'll explain how to create a fun sky scene with hot air balloons.
Adobe Illustrator A Hot Air Balloon Sky Scene In this tutorial, we'll explain how to create a fun sky scene with hot air balloons. We will take advantage of the Blend Tool and the Symbol Sprayer Tool and
Education and Training CUFMEM14A. Exercise 2. Create, Manipulate and Incorporate 2D Graphics
Education and Training CUFMEM14A Exercise 2 Create, Manipulate and Incorporate 2D Graphics Menu Exercise 2 Exercise 2a: Scarecrow Exercise - Painting and Drawing Tools... 3 Exercise 2b: Scarecrow Exercise
WAIPA DISTRICT COUNCIL. Maps Online 9. Updated January This document contains an overview of IntraMaps/Maps Online version 9.
WAIPA DISTRICT COUNCIL Maps Online 9 Updated January 2018 This document contains an overview of IntraMaps/Maps Online version 9.0 Contents Starting Maps Online... 3 Menu Bar... 4 Tools... 5 View Tab...
The purpose of this tutorial is to introduce you to the Construct 2 program. First, you will be told where the software is located on the computer
Learning Targets: Students will be introduced to industry recognized game development software Students will learn how to navigate within the software Students will learn the basics on how to use Construct
HYPERSTUDIO TOOLS. THE GRAPHIC TOOL Use this tool to select graphics to edit. SPRAY PAINT CAN Scatter lots of tiny dots with this tool.
THE BROWSE TOOL Us it to go through the stack and click on buttons THE BUTTON TOOL Use this tool to select buttons to edit.. RECTANGLE TOOL This tool lets you capture a rectangular area to copy, cut, move,
Pen Tool, Fill Layers, Color Range, Levels Adjustments, Magic Wand tool, and shadowing techniques
Creating a superhero using the pen tool Topics covered: Pen Tool, Fill Layers, Color Range, Levels Adjustments, Magic Wand tool, and shadowing techniques Getting Started 1. Reset your work environment
ENGL 323: Writing for New Media Repurposing Content for the Web Part Two
ENGL 323: Writing for New Media Repurposing Content for the Web Part Two Dr. Michael Little michaellittle@kings.edu Hafey-Marian 418 x5917 Using Color to Establish Visual Hierarchies Color is useful in
Vectornator Pro. Manual Version 1.0.2, April 5th, A Linearity GmbH Production
Vectornator Pro Manual Version 1.0.2, April 5th, 2018 A Linearity GmbH Production Vectornator Pro The best and most advanced vector graphic design software for ios A Linearity GmbH Production What you
13 PREPARING FILES FOR THE WEB
13 PREPARING FILES FOR THE WEB Lesson overview In this lesson, you ll learn how to do the following: Create and stylize a button for a website. Use layer groups and artboards. Optimize design assets for
Photoshop / Editing paths
Photoshop / Editing paths Path segments, components, and points Select a path Adjust path segments Add or delete anchor points Convert between smooth points and corner points Adjust path components Path
SMART Meeting Pro 4.2 personal license USER S GUIDE
smarttech.com/docfeedback/170973 SMART Meeting Pro 4.2 personal license USER S GUIDE Product registration If you register your SMART product, we ll notify you of new features and software upgrades. Register
InDesign CC 2014 Intermediate Skills
InDesign CC 2014 Intermediate Skills Adobe InDesign Creative Cloud 2014 University Information Technology Services Training, Outreach, Learning Technologies & Video Production Copyright 2016 KSU Division
Inkscape Tutorial. v2.0. Simon Andrews.
Inkscape Tutorial v2.0 Simon Andrews simon.andrews@babraham.ac.uk What is Inkscape? Vector Graphics Editor Free Software Cross Platform Easy to use Good for: Compositing Drawing Not for: Bitmap editing
Unit 8. Lesson 8.1. Microsoft FrontPage. Introduction. Microsoft FrontPage-1. Microsoft FrontPage
Microsoft FrontPage Unit 8 Microsoft FrontPage Introduction Lesson 8.1 Microsoft FrontPage-1 A number of Software Packages are available in market for creating a website. Among popular software s are Dreamweaver,
Web-Friendly Sites. Planning & Design 1
Planning & Design 1 This tutorial presents useful tips and tricks to help you achieve a more Web-friendly design and make your sites more efficient. The following topics are discussed: How Z-order and
Luggage Tag. 1. Open Creative DRAWings. 2. Left click on on the new design menu.
Luggage Tag 1. Open Creative DRAWings. 2. Left click on on the new design menu. 3. Left click on and then in the circle next to New graphic. 4. For the hoop, select None. 5. Choose the desired fabric type
How to draw and create shapes
Adobe Flash Professional Guide How to draw and create shapes You can add artwork to your Adobe Flash Professional documents in two ways: You can import images or draw original artwork in Flash by using
Photoshop tutorial: Final Product in Photoshop:
Disclaimer: There are many, many ways to approach web design. This tutorial is neither the most cutting-edge nor most efficient. Instead, this tutorial is set-up to show you as many functions in Photoshop
Using SymPrint to Make Overlays, Templates & More...
Welcome to SymPrint SymPrint is an easy-to-use tool for creating communication overlays, worksheets, classroom activities and more using a modern toolbar and common-sense interface modeled after the programs
Correcting Grammar as You Type. 1. Right-click the text marked with the blue, wavy underline. 2. Click the desired option on the shortcut menu.
PROCEDURES LESSON 11: CHECKING SPELLING AND GRAMMAR Selecting Spelling and Grammar Options 2 Click Options 3 In the Word Options dialog box, click Proofing 4 Check options as necessary under the When correcting
Paint Tutorial (Project #14a)
Paint Tutorial (Project #14a) In order to learn all there is to know about this drawing program, go through the Microsoft Tutorial (below). (Do not save this to your folder.) Practice using the different
1. New document, set to 5in x 5in, no bleed. Color Mode should be default at CMYK. If it s not, changed that when the new document opens.
art 2413 typography fall 17 software review This exercise will reacquaint students with Adobe Illustrator, Photoshop, and InDesign. These are the three main design programs used by the industry. There
Making the Gradient. Create a Linear Gradient Swatch. Follow these instructions to complete the Making the Gradient assignment:
Making the Gradient Follow these instructions to complete the Making the Gradient assignment: Create a Linear Gradient Swatch 1) Save the Making the Gradient file (found on Mrs. Burnett s website) to your
WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL
WELCOME TO ALL-TECH SYSTEMS & CO INTRODUCTION TO MICROSOFT WORD TUTORIAL 1 Microsoft Office Word 2010 allows you to create and edit personal and business documents, such as letters, reports, invoices,
Let s Make a Front Panel using FrontCAD
Let s Make a Front Panel using FrontCAD By Jim Patchell FrontCad is meant to be a simple, easy to use CAD program for creating front panel designs and artwork. It is a free, open source program, with the
In this exercise you will be creating the graphics for the index page of a Website for children about reptiles.
LESSON 2: CREATING AND MANIPULATING IMAGES OBJECTIVES By the end of this lesson, you will be able to: create and import graphics use the text tool attach text to a path create shapes create curved and
Creating Multimedia SWF Products
Chapter InDesign can be used to create multimedia products that combine movie clips, sounds, images and animations into professional products that can be distributed on CD, DVD or as SWF files that can
Recipes4Success. Animate Plant Growth. Share 4 - Animation
Recipes4Success In this Recipe, you will create an animated science diagram of plant growth. You will learn how to add images, draw shapes, use the animation options, preview, and publish your project.
GIMP WEB 2.0 BUTTONS
GIMP WEB 2.0 BUTTONS Web 2.0 Navigation: Bar with Icons WEB 2.0 NAVIGATION: NAVIGATION BAR WITH ICONS This navigation bar will be designed with four clickable text links and icon links. In the Menus section,
Inkscape Tutorial: Floral Motif
Inkscape Tutorial: Floral Motif By: Very Simple Designs Web Site: http://verysimpledesigns.com/vectors/inkscape-tutorial-floral-motif.html I was working on the Paisley Motif tutorial and right at the last
Adobe Photoshop CS2 Reference Guide For Windows
This program is located: Adobe Photoshop CS2 Reference Guide For Windows Start > All Programs > Photo Editing and Scanning >Adobe Photoshop CS2 General Keyboarding Tips: TAB Show/Hide Toolbox and Palettes
ILLUSTRATOR TUTORIAL-1 workshop handout
Why is Illustrator a powerful tool? ILLUSTRATOR TUTORIAL-1 workshop handout Computer graphics fall into two main categories, bitmap graphics and vector graphics. Adobe Illustrator is a vector based software
2 Solutions Chapter 3. Chapter 3: Practice Example 1
1 Solutions This section includes the step by step solutions for the practice exercise for the following chapters and sections: Chapter 3 Chapter 4 Chapter 5 Chapter 11: Rainbow Springs sample test Final
Creating Vector Shapes Week 2 Assignment 1. Illustrator Defaults
Illustrator Defaults Before we begin, we are going to make sure that all of us are using the same settings within our application. For this class, we will always want to make sure that our application
Mi c r o s o f t Wo r d Qu i c k Re f e r e n c e Ca r d
Tech Talk # 5 Mi c r o s o f t Wo r d Qu i c k Re f e r e n c e Ca r d Introduction by Renae Schmidt Hello! Welcome to Tech Talk #5. This week we are sharing a Microsoft Word 2010 Quick Reference Card.
With the help of Adobe and a dash of creativity, we can create all kinds of fun things just using the shapes found in our tool box.
You Are the Bomb! digitalscrapper.com /blog/bomb/ You Are the Bomb! by Nannette Dalton With the help of Adobe and a dash of creativity, we can create all kinds of fun things just using the shapes found
Corel Draw 11. What is Vector Graphics?
Corel Draw 11 Corel Draw is a vector based drawing that program that makes it easy to create professional artwork from logos to intricate technical illustrations. Corel Draw 11's enhanced text handling
for ArcSketch Version 1.1 ArcSketch is a sample extension to ArcGIS. It works with ArcGIS 9.1
ArcSketch User Guide for ArcSketch Version 1.1 ArcSketch is a sample extension to ArcGIS. It works with ArcGIS 9.1 ArcSketch allows the user to quickly create, or sketch, features in ArcMap using easy-to-use
Paint/Draw Tools. Foreground color. Free-form select. Select. Eraser/Color Eraser. Fill Color. Color Picker. Magnify. Pencil. Brush.
Paint/Draw Tools There are two types of draw programs. Bitmap (Paint) Uses pixels mapped to a grid More suitable for photo-realistic images Not easily scalable loses sharpness if resized File sizes are
Creating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool
Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text
Introducing Gupta Report Builder
Business Reporting Chapter 1 Introducing Gupta Report Builder You can use Report Builder to design reports. This chapter describes: Our approach to building reports. Some of the reports you can build.
Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
Study Guide. PCIC 3 B2 GS3- Key Applications-Excel. Copyright 2010 Teknimedia Corporation
Study Guide PCIC 3 B2 GS3- Key Applications-Excel Copyright 2010 Teknimedia Corporation Teknimedia grants permission to any licensed owner of PCIC 3 B GS3 Key Applications-Excel to duplicate the contents
INKSCAPE BASICS. 125 S. Prospect Avenue, Elmhurst, IL (630) elmhurstpubliclibrary.org. Create, Make, and Build
INKSCAPE BASICS Inkscape is a free, open-source vector graphics editor. It can be used to create or edit vector graphics like illustrations, diagrams, line arts, charts, logos and more. Inkscape uses Scalable
Introducing Activstudio
Introducing Activstudio Version 3 COPYRIGHT INFORMATION Introducing Activstudio Version 3 Copyright 2007 Promethean Limited. All rights reserved. If this guide is distributed with Activstudio software,
Adobe InDesign CS6 Tutorial
Adobe InDesign CS6 Tutorial Adobe InDesign CS6 is a page-layout software that takes print publishing and page design beyond current boundaries. InDesign is a desktop publishing program that incorporates
DESIGNING A WEBSITE LAYOUT IN PHOTOSHOP CS4. Step 1
DESIGNING A WEBSITE LAYOUT IN PHOTOSHOP CS4 Step 1 We ll be using the 960s Grid System (download here) to keep everything aligned. Once you have it, open the included Photoshop document called: 960_grid_24_col.psd.
Tutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
XXXX BASIC SHAPES. Information. Sheet No. INTRODUCTION TO GRAPHICS
INTRODUCTION TO GRAPHICS BASIC SHAPES Information Sheet No. XXXX There are a few different methods through which you can make shapes. Create a new blank layer by clicking on the new layer icon as shown
Overview of Adobe Fireworks CS6
Overview of Adobe Fireworks CS6 Lesson topics: Work with the Adobe Fireworks CS6 workspace: tools, Document windows, menus, and panels. Customize the workspace. Change the magnification of a document.
The HOME Tab: Cut Copy Vertical Alignments
The HOME Tab: Cut Copy Vertical Alignments Text Direction Wrap Text Paste Format Painter Borders Cell Color Text Color Horizontal Alignments Merge and Center Highlighting a cell, a column, a row, or the
9 Tables Part I. Session 45: Creating Tables Session 46: Modifying the Layout of Tables Session 47: Formatting the Design of Tables. Unit.
Unit 9 Tables Part I Session 45: Creating Tables Session 46: Modifying the Layout of Tables Session 47: Formatting the Design of Tables 2 45 Creating Tables Session Objectives Create a table Enter data