v SMS 12.3 Tutorial GIS P Prerequisites Time Requirements Objectives
|
|
|
- Josephine Lambert
- 5 years ago
- Views:
Transcription
1 v SMS 12.3 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct to import water related land use information acquired from Utah s Portal, found online. However, the concepts can be useful to work with any data in SMS. P Prerequisites Requirements Time None Module minutes Map Module
2 1 Getting Started Opening an Existing Data File and Viewing Attributes Mapping the Shape File to an Active Coverage Map Module Display Options Downloading Aerial Photo Conclusion Getting Started (Geographic Information System) data can be useful for building models with SMS. This is particularly true for land use or other data that would be time consuming to digitize by hand. data can also be made visible behind SMS data in the Main Graphics Window. SMS contains two implementations for working with data: Generic SMS implementation Can import Arc shapefiles as well as MapInfo MIF/MID formats. Includes tools for selecting, viewing table data, and converting data to coverages and scatter sets. Arc implementation (ArcObjects ) Uses ESRI code to import, manage, and display data. Use of ArcObjects requires a license of Arc on the computer being used. ArcObjects implementation has more options for displaying Arc data (it uses the same layer settings functionalities that exist in Arc ). Arc only works in the 32-bit version of SMS. This tutorial uses the default generic SMS implementation. The ArcObjects implementation has some differences which are not shown or discussed here. 2 Opening an Existing Data File and Viewing Attributes Start by opening the shapefile in the generic SMS implemented mode. Opening a shapefile with ArcObjects implementation requires a different procedure which is not covered in this tutorial. To open a shapefile in the generic SMS implemented mode: 1. Select File Open to bring up the Open dialog. 2. Browse to the data files\ folder for this tutorial. 3. Select SGID_U024_WaterRelatedLanduse.shp (make sure it is the one with.shp as the extension, not.shp.xml ). 4. Click Open to import the shapefile and exit the Open dialog. The project should appear similar to Figure 1. Page 2 of 7
3 Figure 1 Shapefile after importing 5. Switch to the module. 6. Click Get Attributes tool to bring up the Info dialog. 7. Move the Info dialog to the side and click inside the lake polygon located in the middle of the display. The Info dialog should now show the attributes for the lake. This includes a description of the land use and land cover designation, the year the data was acquired, the total polygonal area in acres, and its length in feet. 8. Close the Info dialog by clicking on another tool (such as the Pan tool). 9. Right-click on SGID_U024_WaterRelatedLanduse.shp and select Open Attribute Table to bring up the Attributes dialog. The Attributes dialog shows the same information as the Info dialog, but with information listed for all polygons in the domain of the shapefile. Note that the dialog lists the total number of records in the bottom left corner of the dialog. 10. Click OK to close the Attributes dialog. 3 Mapping the Shape File to an Active Coverage In order to incorporate data into models, the data needs to be converted into native SMS data. data is generally converted into map coverages, which are similar to layers. Data converted from layers into map coverages are put into the active coverage. Therefore, it is important to create the type of coverage wanted and make it active before the conversion process. To convert the landuse data into an area property coverage with designated materials, Page 3 of 7
4 do the following: 1. Right-click on Area Property and select Rename. 2. Enter Landuse and press Enter to set the new name. 3. Right-click on Landuse and select Type Generic Area Property. 4. Select Landuse to make it active. 5. Switch to the module. 6. Select Mapping Shapes Feature Objects to bring up the to Feature Objects Wizard dialog. 7. Click Next to bring up the Step 1 of 1 page of the to Feature Objects Wizard dialog. 8. In the Mapping Preview section, in the Description column, select Material from drop-down on the Mapping row. SMS will assign the polygon description to each polygon mapped to the active coverage. 9. Click Finish to close the to Feature Objects Wizard dialog. 10. Turn off Data in the Project Explorer. The project should appear similar to Figure 2. Figure 2 After mapping to feature objects 4 Map Module Display Options The landuse data has now been copied to an area property coverage in SMS. Area property coverages can be used to define materials for numeric models. Each polygon is assigned a material based upon the description column that was mapped early. Page 4 of 7
5 To see the landuse information in the SMS map module, it s necessary to change the visualization setting. To do this: 1. Select Display Display Options to bring up the Display Options dialog. 2. Select Map from the list on the left. 3. Turn off Node and Vertex. 4. Turn on Fill under Polygon and Legend under General. 5. Click OK to close the Display Options dialog. 6. Zoom into the city located north-east of the lake (see Figure 3). This area is farmland and residential as can be seen by observing the color of the polygon and matching it to the legend. Most fields are used for alfalfa according to the color associated with it. The project should appear similar to Figure 3. Figure 3 Display of the land use coverage 5 Downloading Aerial Photo Sometimes it is useful to download an aerial photo in order to supplement the display and for better observations. The Import from Web tutorial gives instructions for one method for finding image data online. SMS can also grab image data from Terraserver for a specific geographic area. To grab an image from Terraserver for this area: 1. Click Display Options to open the Display Options dialog. 2. Select Map from the list on the left. Page 5 of 7
6 3. Turn off Fill under Polygon. 4. Click OK to close the Display Options dialog. This makes the display easier to read once the aerial photo is imported. 5. Zoom in to the area shown in Figure Click Get Data Tool and drag a box to select a region within the city (see Figure 4) to bring up the Data Service Options dialog. 7. Select World Imagery and click OK to bring up the Save Web Services Data File(s) dialog. 8. Enter aerial as the File name and click Save to close the Save Web Services Data File(s) dialog and bring up the Image Pixel Size dialog. 9. When asked to confirm creating the file, click Yes. 10. Click OK to accept the default size and close the Image Pixel Size dialog. The photo will take a moment to update and display. The image should appear similar to Figure 4. Figure 4 Viewing the aerial photo Multiple aerial images can be added to the project using the Get Data Tool shown in Figure 5. If desired, turn off Arcs in the Display Options dialog., as Page 6 of 7
7 Figure 5 Multiple aerial images added to the project 6 Conclusion This concludes the tutorial. Feel free to continue to experiment with shapefiles in SMS by downloading other pertinent data from websites. The SMS wiki 1 has a page that includes some ideas for places to acquire useful and other spatial data. 1 See for more details. Page 7 of 7
v SMS 12.2 Tutorial GIS Requirements GIS Module Map Module ArcGis (Optional) Time minutes Prerequisites None Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This tutorial demonstrates how to read in data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will
v SMS 13.0 Tutorial GIS P Prerequisites Time Requirements Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct
v SMS 12.1 Tutorial GIS Requirements GIS Module Map Module ArcGis (Optional) Time minutes Prerequisites None Objectives
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial demonstrates how to read in data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will
v SMS 11.1 Tutorial GIS Requirements GIS Module Map Module ArcGis (Optional) Time minutes Prerequisites None Objectives
v. 11.1 SMS 11.1 Tutorial GIS Objectives This tutorial demonstrates how you can read in GIS data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. We will
v SMS 12.3 Tutorial Import From Web Requirements Internet connection Time minutes Prerequisites None Objectives
SMS 12.3 Tutorial Import from Web v. 12.3 Objectives This tutorial gives an overview of the Importing from Web option offered by SMS. This option connects SMS to a web based program that adds additional
v SMS 12.2 Tutorial Import from Web Requirements None Time minutes Prerequisites None Objectives
v. 12.2 SMS 12.2 Tutorial Import from Web Objectives This lesson is designed to give an overview of with the Importing from Web option offered by SMS. This option connects SMS to a web based program that
v SMS 12.2 Tutorial Online Data Dynamic Images Prerequisites None Requirements Internet Connection Time minutes
v. 12.2 SMS 12.2 Tutorial Dynamic Images Objectives This lesson is designed to help users become familiar with the Dynamic Image option offered by SMS. This option connects SMS to a web based program that
Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.
v. 10.0 GMS 10.0 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS
v Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
v Online Data Dynamic Images SMS Tutorials Prerequisites Requirements Time Objectives
v. 13.0 SMS 13.0 Tutorial Dynamic Images Objectives This tutorial instructs on the basic skills concerning how to use the dynamic image option offered by SMS. This option connects SMS through an internet
Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface. Prerequisites Overview Tutorial Requirements ADH Mesh Module Scatter
v SMS Tutorials Working with Rasters Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots, and interpolate
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.3 SMS 12.3 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v TUFLOW FV SMS 13.0 Tutorial Requirements Time Prerequisites Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates creating a simple model of a short section of river using the SMS TUFLOW FV interface. A mesh for an inbank area of a river will be built,
Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography in GMS.
v. 10.4 GMS 10.4 Tutorial Using free, dynamic, online map data in GMS Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography
Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography in GMS.
v. 10.3 GMS 10.3 Tutorial Using free, dynamic, online map data in GMS Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography
Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography in GMS.
v. 10.1 GMS 10.1 Tutorial Using free, dynamic, online map data in GMS Objectives Learn how free online map data can quickly and easily be used to dynamically update background maps and aerial photography
v TUFLOW FV SMS 12.2 Tutorial Time Requirements Prerequisites Objectives
SMS 12.2 Tutorial v. 12.2 Objectives is an engine for performing 2D and 3D hydrodynamic simulations. The model solves the Non-linear Shallow Water Equations (NLSWE) on a flexible mesh using a finite-volume
v Cartesian Grid Generation SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial gives a brief introduction to generating a Cartesian Grid in SMS. Prerequisites Overview Tutorial Map Module Tutorial Requirements Map Module Cartesian
v Water Distribution System Modeling Working with WMS Tutorials Building a Hydraulic Model Using Shapefiles Prerequisite Tutorials None
v. 10.1 WMS 10.1 Tutorial Water Distribution System Modeling Working with EPANET Building a Hydraulic Model Using Shapefiles Objectives Open shapefiles containing the geometry and attributes of EPANET
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.2 SMS 12.2 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v Working with Rasters SMS 12.1 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
Import, view, edit, convert, and digitize triangulated irregular networks
v. 10.1 WMS 10.1 Tutorial Import, view, edit, convert, and digitize triangulated irregular networks Objectives Import survey data in an XYZ format. Digitize elevation points using contour imagery. Edit
Watershed Modeling Orange County Hydrology Using GIS Data
v. 9.1 WMS 9.1 Tutorial Watershed Modeling Orange County Hydrology Using GIS Data Learn how to delineate sub-basins and compute soil losses for Orange County (California) hydrologic modeling Objectives
Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.2 GMS 10.2 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
Water Distribution System Modeling EPANET. Import an existing water distribution model and modify link and node parameters within WMS
v. 10.1 WMS 10.1 Tutorial Water Distribution System Modeling EPANET Hydraulic Model Import an existing water distribution model and modify link and node parameters within WMS Objectives View an existing
v TUFLOW-2D Hydrodynamics SMS Tutorials Time minutes Prerequisites Overview Tutorial
v. 12.2 SMS 12.2 Tutorial TUFLOW-2D Hydrodynamics Objectives This tutorial describes the generation of a TUFLOW project using the SMS interface. This project utilizes only the two dimensional flow calculation
Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Requirements
v. 13.0 SMS 13.0 Tutorial Objectives Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Prerequisites Overview Tutorial Requirements Map Module
4. If you are prompted to enable hardware acceleration to improve performance, click
Exercise 1a: Creating new points ArcGIS 10 Complexity: Beginner Data Requirement: ArcGIS Tutorial Data Setup About creating new points In this exercise, you will use an aerial photograph to create a new
v Introduction to WMS WMS 11.0 Tutorial Become familiar with the WMS interface Prerequisite Tutorials None Required Components Data Map
s v. 11.0 WMS 11.0 Tutorial Become familiar with the WMS interface Objectives Import files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
Objectives Learn how to work with projections in WMS, and how to combine data from different coordinate systems into the same WMS project.
s v. 11.0 Projections / Coordinate Systems WMS 11.0 Tutorial Projections / Coordinate Systems Working with map projections in WMS Objectives Learn how to work with projections in WMS, and how to combine
v STWAVE Analysis SMS 11.2 Tutorial Requirements Map Module STWAVE Cartesian Grid Module Scatter Module Prerequisites Time minutes
v. 11.2 SMS 11.2 Tutorial Objectives This workshop gives a brief introduction to the STWAVE modules. Data from the Shinnecock Inlet, Long Island, New York, have been set up as an example. This example
Objectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid independent conceptual models.
v. 9.0 GMS 9.0 Tutorial Use points, arcs and polygons to make grid independent conceptual models Objectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid
v CMS-Wave Analysis SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This workshop gives a brief introduction to the CMS-Wave interface and model. This model is similar to STWAVE and the tutorial for the models is similar. As with the
v Google Earth Files SMS 13.0 Tutorial Prerequisites None Requirements Mesh Module Google Earth Time minutes
v. 13.0 SMS 13.0 Tutorial Objectives Learn how to save SMS data to a KMZ file format. KMZ files are Google Earth files and will allow viewing SMS data in Google Earth. SMS can save any georeferenced data
WMS 10.1 Tutorial GSSHA Applications Analyzing the Effects of Land Use Change (Part - I) Model land use changes using GSSHA
v. 10.1 WMS 10.1 Tutorial GSSHA Applications Analyzing the Effects of Land Use Change (Part - I) Model land use changes using GSSHA Objectives This tutorial demonstrates how to model and compare the effects
v Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
SMS v SRH-2D Tutorials Obstructions. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorials Obstructions Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should
GSSHA WMS Basics Loading DEMs, Contour Options, Images, and Projection Systems
v. 10.0 WMS 10.0 Tutorial GSSHA WMS Basics Loading DEMs, Contour Options, Images, and Projection Systems Learn how to work with DEMs and images and to convert between projection systems in the WMS interface
v MODFLOW Transient Calibration Calibrating transient MODFLOW models GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file.
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file. Prerequisites None Requirements Scatter Module Map
v SMS 11.1 Tutorial SRH-2D Prerequisites None Time minutes Requirements Map Module Mesh Module Scatter Module Generic Model SRH-2D
v. 11.1 SMS 11.1 Tutorial SRH-2D Objectives This lesson will teach you how to prepare an unstructured mesh, run the SRH-2D numerical engine and view the results all within SMS. You will start by reading
Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.4 GMS 10.4 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v Getting Started An introduction to GMS GMS Tutorials Time minutes Prerequisite Tutorials None
v. 10.3 GMS 10.3 Tutorial An introduction to GMS Objectives This tutorial introduces GMS and covers the basic elements of the user interface. It is the first tutorial that new users should complete. Prerequisite
SMS v Obstructions. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should have been completed
WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 8.4 WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
v Observations SMS Tutorials Prerequisites Requirements Time Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with measured field
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS
v. 10.1 WMS 10.1 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS Objectives Learn how to build cross sections, stream centerlines, and
v Introduction to WMS Become familiar with the WMS interface WMS Tutorials Time minutes Prerequisite Tutorials None
s v. 10.0 WMS 10.0 Tutorial Become familiar with the WMS interface Objectives Read files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
SMS v Weir Flow. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.2 SRH-2D Tutorial Objectives This tutorial demonstrates the process of using a weir boundary condition (BC) within SRH-2D to model an overflow weir near a bridge structure. The Simulations tutorial
Exercise 1: An Overview of ArcMap and ArcCatalog
Exercise 1: An Overview of ArcMap and ArcCatalog Introduction: ArcGIS is an integrated collection of GIS software products for building a complete GIS. ArcGIS enables users to deploy GIS functionality
WMS 9.0 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS
v. 9.0 WMS 9.0 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS Objectives Learn how to build cross sections, stream centerlines, and bank
Map Direct Lite. Quick Start Guide: Map Layers 5/14/2018
Map Direct Lite Quick Start Guide: Map Layers 5/14/2018 Contents Quick Start Guide: Map Layers... 1 Map Layers in Map Direct Lite.... 3 What is a Basemap Layer?... 4 Change the Basemap Using the Basemap
Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation in GMS.
v. 9.1 GMS 9.1 Tutorial Using rasters for interpolation and visualization in GMS Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation
v SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
v Modeling Orange County Unit Hydrograph GIS Learn how to define a unit hydrograph model for Orange County (California) from GIS data
v. 10.1 WMS 10.1 Tutorial Modeling Orange County Unit Hydrograph GIS Learn how to define a unit hydrograph model for Orange County (California) from GIS data Objectives This tutorial shows how to define
Learn how to link a hydrologic model to the SWMM storm drain model
v. 10.1 WMS 10.1 Tutorial Learn how to link a hydrologic model to the SWMM storm drain model Objectives Build a rational method hydrologic model and compute sub-basin flows. Import storm drain network
Introduction to SAGA GIS
GIS Tutorial ID: IGET_RS_001 This tutorial has been developed by BVIEER as part of the IGET web portal intended to provide easy access to geospatial education. This tutorial is released under the Creative
v SMS 12.2 Tutorial Observation Prerequisites Requirements Time minutes
v. 12.2 SMS 12.2 Tutorial Observation Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with
Using rasters for interpolation and visualization in GMS
v. 10.3 GMS 10.3 Tutorial Using rasters for interpolation and visualization in GMS Objectives This tutorial teaches how GMS uses rasters to support all kinds of digital elevation models and how rasters
v. 8.4 Prerequisite Tutorials Watershed Modeling Advanced DEM Delineation Techniques Time minutes
v. 8.4 WMS 8.4 Tutorial Modeling Orange County Rational Method GIS Learn how to define a rational method hydrologic model for Orange County (California) from GIS data Objectives This tutorial shows you
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 10.1 WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
GMS Tutorials MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach
GMS Tutorials MODFLOW Conceptual Model Approach I GMS 10.4 Tutorial MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach v. 10.4 Objectives
MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 10.2 GMS 10.2 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
Name: Date: June 27th, 2011 GIS Boot Camps For Educators Lecture_3
Name: Date: June 27th, 2011 GIS Boot Camps For Educators Lecture_3 Practical: Creating and Editing Shapefiles Using Straight, AutoComplete and Cut Polygon Tools Use ArcCatalog to copy data files from:
MODFLOW Regional to Local Model Conversion,
v. 10.2 GMS 10.2 Tutorial MODFLOW Regional to Local Model Conversion, Steady State Create a local model from a regional model using convenient tools provided in GMS Objectives Use the convenient tools
Mosaic Tutorial: Advanced Workflow
Mosaic Tutorial: Advanced Workflow This tutorial demonstrates how to mosaic two scenes with different color variations. You will learn how to: Reorder the display of the input scenes Achieve a consistent
v Scatter Data TINs SMS 12.3 Tutorial Requirements Scatter Module Map Module Time minutes Prerequisites None Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial covers the basics of working with TINs (triangulated irregular networks) using the scatter module of SMS, including: importing TIN data, editing and filtering
SMS v D Summary Table. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorial Objectives Learn the process of making a summary table to compare the 2D hydraulic model results with 1D hydraulic model results. This tutorial introduces a method of presenting
v CMS-Flow SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This lesson demonstrates how to prepare a grid and run a solution using. Prerequisites SMS Overview Requirements Map Module Cartesian Grid Module Scatter Module Time
SMS v Culvert Structures with HY-8. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Culvert Structures with HY-8 Objectives This tutorial demonstrates the process of modeling culverts in SRH-2D coupled with the Federal Highway Administrations HY-8 culvert analysis
v Creating a Size Function SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Creating a Size Function Objectives This lesson will instruct how to create and apply a size function to a 2d mesh model. Size functions can be created using various data. This
v SMS 11.1 Tutorial Overview Time minutes
v. 11.1 SMS 11.1 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. It is suggested that this tutorial
Watershed Modeling Using Online Spatial Data to Create an HEC-HMS Model
v. 10.1 WMS 10.1 Tutorial Watershed Modeling Using Online Spatial Data to Create an HEC-HMS Model Learn how to setup an HEC-HMS model using WMS online spatial data Objectives This tutorial shows how to
GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation Objectives Learn how to constrain the areal extent of the solids created
v GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models
v. 10.0 GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
v Map Module Operations SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial describes the fundamental tools in the Map module of the SMS. This tutorial provides information that is useful when constructing any type of geometric
Storm Drain Modeling Defining HY-12 Storm Drain Networks with Shapefiles and LandXML files
WMS 10.1 Tutorial v. 10.1 Storm Drain Modeling Defining HY-12 Storm Drain Networks with Shapefiles and LandXML files Set up an HY-12 storm drain model in the WMS interface using common file types such
v Data Visualization SMS 12.3 Tutorial Prerequisites Requirements Time Objectives Learn how to import, manipulate, and view solution data.
v. 12.3 SMS 12.3 Tutorial Objectives Learn how to import, manipulate, and view solution data. Prerequisites None Requirements GIS Module Map Module Time 30 60 minutes Page 1 of 16 Aquaveo 2017 1 Introduction...
GIS OPERATION MANUAL
GIS OPERATION MANUAL 1. Computer System Description Hardware Make Compaq Presario 5004 CPU AMD Athlon 1.1 Ghz Main Memory 640MB CD-ROM 52 X CD-RW 8 X HD 57GB Monitor 19 inch Video Adapter 16 Mb Nvidia
v Mesh Generation SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Mesh Generation Objectives This tutorial demostrates the fundamental tools used to generate a mesh in the SMS. Prerequisites SMS Overview SMS Map Module Requirements Mesh Module
Objectives This tutorial shows how to use the Map Flood tool to quickly generate floodplain data.
v. 11.0 WMS 11.0 Tutorial Creating a Objectives This tutorial shows how to use the Map Flood tool to quickly generate floodplain data. Prerequisite Tutorials Introduction to WMS Required Components Scatter
Watershed Modeling Maricopa Predictive HEC-1 Model. Watershed Modeling Maricopa County: Master Plan Creating a Predictive HEC-1 Model
v. 10.1 WMS 10.1 Tutorial Watershed Modeling Maricopa County: Master Plan Creating a Predictive HEC-1 Model Build a watershed model to predict hydrologic reactions based on land use development in Maricopa
Spatial Hydrologic Modeling Using NEXRAD Rainfall Data in an HEC-HMS (MODClark) Model
v. 10.0 WMS 10.0 Tutorial Spatial Hydrologic Modeling Using NEXRAD Rainfall Data in an HEC-HMS (MODClark) Model Learn how to setup a MODClark model using distributed rainfall data Objectives Read an existing
City of La Crosse Online Mapping Website Help Document
City of La Crosse Online Mapping Website Help Document This document was created to assist in using the new City of La Crosse online mapping sites. When the website is first opened, a map showing the City
v mod-path3du A particle tracking program for MODFLOW-USG GMS Tutorials Time minutes Prerequisite Tutorials MODPATH
v. 10.4 GMS 10.4 Tutorial A particle tracking program for MODFLOW-USG Objectives Become familiar with GMS's interface for. Prerequisite Tutorials MODPATH Required Components MODFLOW-USG MP3DU Time 15 30
How to view details for your project and view the project map
Tutorial How to view details for your project and view the project map Objectives This tutorial shows how to access EPANET model details and visualize model results using the Map page. Prerequisites Login
WMS 10.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM
v. 10.1 WMS 10.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM Objectives Learn how to delineate a watershed
v MODPATH GMS 10.3 Tutorial The MODPATH Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.3 GMS 10.3 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, displaying pathlines in different
GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and. Use TINs with horizons to create 3D, finite element meshes
v. 10.4 GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and Meshes Use TINs with horizons to create 3D, finite element meshes Objectives Learn how to use TINs to assign horizon surfaces and how
Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional (SRH-2D) simulation.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation. Prerequisites SMS Overview tutorial Requirements Model Map Module
Activity: Exploring GeoPDFs
Activity: Exploring GeoPDFs A GeoPDF is a map stored in Adobe s Portable Document Format that is geographically referenced to a real world coordinate system. TerraGo Technologies, which is the company
Select the Parks within Forest Acres
Select the Parks within Forest Acres TASKS RESULT 1. Add the county boundary, municipalities and parks (pts.) layers to your map 2. Save your map (.mxd) to your desktop Your map should look something like
Stratigraphy Modeling Horizons with Rasters Create solids from rasters using the Horizons Solids tool.
v. 10.1 GMS 10.1 Tutorial Create solids from rasters using the Horizons Solids tool. Objectives Learn what a raster catalog is and how it can be used to create subsurface models. Prerequisite Tutorials
This tutorial introduces the HEC-RAS model and how it can be used to generate files for use with the HEC-RAS software.
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial introduces the model and how it can be used to generate files for use with the software. Prerequisites Overview Tutorial Requirements 5.0 Mesh Module
Stratigraphy Modeling Horizons with Rasters Create solids from rasters using the Horizons Solids tool.
v. 10.3 GMS 10.3 Tutorial Create solids from rasters using the Horizons Solids tool. Objectives Learn what a raster catalog is and how it can be used to create subsurface models. Prerequisite Tutorials
Coordinate Systems/Units
GIS and Mapping Procedures in fgis Beginning a fgis Project Adding Basemap Data Adding GPS Data Editing Layer Properties Checking Feature Attributes Adding Acres to Area Features Adding Acres Labels to
Use the MODFLOW Lake (LAK3) package to simulate mine dewatering
v. 10.3 GMS 10.3 Tutorial Use the MODFLOW Lake (LAK3) package to simulate mine dewatering Objectives Learn the steps involved in using the MODFLOW Lake (LAK3) package interface in GMS. This tutorial will
v. 9.0 GMS 9.0 Tutorial MODPATH The MODPATH Interface in GMS Prerequisite Tutorials None Time minutes
v. 9.0 GMS 9.0 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, different ways to display pathlines,
v SRH-2D Post-Processing SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial SRH-2D Post-Processing Objectives This tutorial illustrates some techniques for manipulating the solution generated by the Sedimentation and River Hydraulics Two-Dimensional (SRH-2D)