Madhya Pradesh Bhoj (Open) University, Bhopal DIPLOMA IN COMPUTER APPLICATION (DCA)
|
|
|
- Esmond Dawson
- 5 years ago
- Views:
Transcription
1 Subject: Fundamentals of computers and information technology Maximum Marks: 30 1.What is computer? Write the different types of compute according to size and working process. What is history of computer? Write the 1st, 2nd and 3rd generation of computers. 2. What is input device of computer? Explain MICR, trackball, Scanner and joystick. What is output device of computer? Explain printer, plotter, monitor and loud speaker. 3. What is computer memory? Describe RAM and ROM. What is difference between primary and secondary memory 4. What is operating system? Write the difference between single user and multiuser operating system. What is software? Write short note on system software, application software and firmware 5. What is disk operating system (DOS) explain any three internal commands of DOS. Write short note on DIR, CLS, MD and DATE command of DOS. 6. Explain leased line and broadband connection. What is topology? Describe BUS, STAR, MESH, TREE (any two)
2 Subject: PC Packages (Windows XP, Word, Excel, Power Point ) Maximum Marks: 30 What is window? Describe control panel, my computer, pop-up menu and recycle bin. Write down the features of Window XP. 2. How to create document in MS- Word? Explain menu bar of MS- Word. What is mail merge? How to create list in mail merge MS- Word document. 3. How to set font size, language, line alignment trough menu bar MS- Word document. How to insert table and chart in MS- Word document? 4. What is MS-Excel Sheet? How to create worksheet in MS- Excel How to create mark sheet in MS- Excel? 5. Write short note on formulas of MS- Excel. (a) SUM, (b) AVRAGE, (c) MAXIMUM, (d) MINIMUM Describe the followings (any three) (1) Header and footer (2) Border & color (3) Toolbar (4) Printing Worksheet 6. Write down the features of power point presentation and explain slide design of it. Explain the follows. (1) Slide show (2) Clip Arts (3) Animation on slide (4) Text formatting of slide
3 Subject: MS-Access Maximum Marks: 30 Explain Data, Database and DBSM with example. Write the difference between manual and computerized database system. 2. How to create database in MS-Access? Write steps of creating blank database. What are features of MS-Access? Write short note on it. 3. What is relationship in database? Write various type of relationship in database. Explain the followings (1) Inserting the field in table (2) Rename a field in table (3) delete the field in table 4. What is the query in MS-Access? Explain the use of query. Write the steps of creating query in MS-Access 5. Write short note on. (b) Columnar forms, (b) Tabular forms (c) Main/Sub forms (d) Way of creating forms How to create Forms in MS-Access? Write the steps of creating form. 6. Explain the reports? How to create reports. Explain the Macro? How to create macros in MS-Access
4 Subject: Internet and web page designing Maximum Marks: 30 What is the internet? Write the difference between internet and intranet. What is the ? Classified the protocols of What is protocol? Write short note on FTP and TCP/IP Protocol. What is internet chatting? Explain concepts of remote logging. 3. What is word wide web (WWW)? Describe different web browser. Explain the followings (2) HTTP (2) URLs (3) Search engines 4. What is HTML? Write various tags of HTML. How to register a domain? Explain the domain naming system (DNS). 5. Explain the following in brief. (c) Head & Body section (b) Hyperlinks (c) Inserting Image (d) Use of font size and attributes. Write the issues on website creation and maintenance. 6. What are the HTML design tools? Explain it. Write the short note on text chatting, video chatting and voice chatting with example.
5 Subject: C-Programming Language Maximum Marks: 30 What is the programming language? Explain the high level, middle level and low level programming languages. What is the translator? Write short note on compiler, interpreter and assembler. 2. Explain the operators of C- programming language in brief. Write short note on: (1) Constant, (2)Variable (3)Key word 3. What is the use of conditional statement? Write the program for if-else statement. What is loop in C- programming? Write the difference between while and do-while loop with example. 4. Write the functionality of switch case statement with help of suitable example. What is array? Explain one dimensional (1D) and two dimensional (2D) arrays with example. 5. What are functions in C- programming language explain in brief. Write down the difference between call by value and call by reference. 6. How to declare the pointer variable? Write program for it. What is structure; create the structure for student record in C-programming language? 7. What is the header file in C-programming language? Write any three functions of consol header file of C-programming language.
6 Subject: Visual Basic Maximum Marks: What is the IDE (integrated development environment) in visual basic? Explain in brief. Write the different options of menu bar in visual basic. 2. What are form window, properties window and toolbar in visual basic? Write short note on: (2) Constants, (2)Variable (3)data types 3. What is array in visual basic? Explain different types of it. What is if-else statement in visual basic? Write the suitable program for if-else statement. 4. Write the functionality of switch case statement. Describe it with help of example. Write the syntax of for loop, while loop and do-while loop in visual basic 5. How to show entry control and exit control looping statements in visual basic? Write difference between option box and check box in visual basic 6. Describe the properties of list box, combo box and command batons. How to handle image in graphic control in visual basic? 7. Write the steps for connecting with data base in visual basic. Write short note on: (1) Pull-down menu (2) pop-up menu (3)error handling method and function
Madhya Pradesh Bhoj (Open) University, Bhopal Diploma in Computer Application (DCA) Assignment Question Paper I
Subject : - Fundamental of Computer and IT Maximum Marks : 30 1. Explain various characteristics of computer & various uses of it. 2. What is the software? Discuss the characteristics of user-friendly
Table of Contents. Preface... iii COMPUTER BASICS WINDOWS XP
Table of Contents Preface... iii COMPUTER BASICS Fundamentals of Computer 1 Various Types of Computers 2 Personal Computer 2 Personal Digital Assistant 3 Laptop Computer 3 Tablet PC 3 Main Frame Computer
KENDRIYA VIDYALAYA CHENANI (J & K)
KENDRIYA VIDYALAYA CHENANI (J K) SESSION: 2017-18 SPLIT-UP OF COMPUTER EDUCATION Class : III INTRODUCTION ABOUT COMPUTERS What is Computer? April Introduction about main parts of computer 1. Advantages
SUBJECT COMPUTER APPLICATION PAGE 1
BACHELOR OF ARTS (B.A.) (THREE YEAR DEGREE COURSE) SUBJECT COMPUTER APPLICATION PAGE 1 B.A.(COMPUTER APPLICATION) COURSE STRUCTURE FIRST YEAR PAPER 101: Computer Fundamentals PAPER 102: Operating System
DCA101 PC HARDWARE AND OPERATING SYSTEMS
DCA101 PC HARDWARE AND OPERATING SYSTEMS (Answer all questions. Each question carries 1 mark) Choose the most correct answer from the given alternatives 1. Which of the following is a volatile memory?
DIPLOMA IN COMPUTER APPLICATION. SEMISTER-1 Sl. No Subject Theory Practical Credits Weeks 1 Computer Fundamentals MS Office
DIPLOMA IN COMPUTER APPLICATION SEMISTER-1 Sl. No Subject Theory Practical Credits Weeks 1 Computer Fundamentals 50 50 2 3 2 MS Office 50 50 4 5 (Word,Excel,Powerpoint,MsVisio 3 HTML, CSS, JavaScript 50
ST. MARY S COLLEGE FORM 4
Term 1 Week 1 Week 2 FUNDAMENTALS OF HARDWARE AND SOFTWARE 1. The generalpurpose computer system 2. Functions of the major hardware components of a computer system 3. Functions and uses of primary storage
Syllabus. S.N. Course Name Code Duration Course Fee
Syllabus S.N. Course Name Code Duration Course Fee 01 Certificate in Financial 3 CFA Accounting (CFA) Concept of Financial Accounting Introduction to Tally... Company Creation Accounting and Inventory
CONTENTS. Chapter 1 Introduction and Evolution of Computer
CONTENTS Chapter 1 Introduction and Evolution of Computer 1.1 Concept and Characteristics of Computer... 2 1.2 Application of Computers... 6 1.3 History of Computer... 8 Mechanical Calculating Era... 8
DIPLOMA IN BUSINESS PROCESS OUTSOURCING FINANCE & ACCOUNTING
No. of Printed Pages : 8 I I DIPLOMA IN BUSINESS PROCESS OUTSOURCING FINANCE & ACCOUNTING O Term-End Examination June, 2010 O : IT SKILLS Time : 3 hours Maximum Marks : 100 Note : (i) Please answer all
Identifying the main document for form letters Inserting an existing document into an open document
Department: Business Unit 1, September Word - Creating a Document with a Table, Chart & Unit 2, October Word - Generating Form letters, mailing labels, Watermark What are the intermediate features of Microsoft
Contents. Project One. Introduction to Microsoft Windows XP and Office Creating and Editing a Word Document. Microsoft Word 2003
FM TBBBB 39909 10/27/06 4:06 PM Page iii Contents FMTOC TBBBB 39909 Page iii 10/20/06 MD Preface To the Student Introduction to Microsoft Windows XP and Office 2003 ix xiv Objectives WIN 4 Introduction
Information Technology (IT) Paper-I Theory 40 Practical - 60
29 Information Technology (IT) Paper-I Theory 40 Practical - 60 Unit.I Digital Literacy: Understand the fundamentals of computing Identify the components of a computer Identify the steps for starting &
Vocabulary Platform Computing\ First grade Theoretical number of hours=30 Practical number of hours =60
Vocabulary Platform Computing\ First grade Theoretical number of hours=30 Practical number of hours =60 Sequence Subject Theoretical number of hours Introduction (Introduction to Computers, the concepts
Learning Microsoft Office 2010 NASTA Edition, 2011
A Correlation of Learning Microsoft Office 2010 To the Arkansas Curriculum Framework for Computerized Business s Computerized Business s Table of Contents Unit 1: Hardware and Software Hours: 3... 3 Unit
Mathematics. Computer Applications. New Jersey Quality Single Accountability Continuum (NJQSAC) Department: Course Title.
Textbook(s): Date: Content Unit 1 MS PowerPoint September 1-11 Name the parts of the PowerPoint Window. How do you use a Design Template? What types of toolbars are there in PowerPoint? How do you insert
HIGER SECONDARY FIRST YEAR COMPUTER SCIENCE
HIGER SECONDARY FIRST YEAR COMPUTER SCIENCE VOLUME I Chapter 1 : Introduction to computers and Number Systems 1.1 Introduction to Computers 1.1.1 History of Computers 1.1.2 Data, Information and program
COMPUTER CONCEPTS. Windows
COMPUTER CONCEPTS Day Chapter Fundamentals Of Computer Classification Of Computer Cpu & Block Diagram Software & Hardware Networking Concepts Topics Of Course Fundamentals (What Is Computer & Abbreviations,
DETAILED SYLLABUS 1. INTRODUCTION TO COMPUTER
DETAILED SYLLABUS 1. INTRODUCTION TO COMPUTER 1.0 Introduction 1.1 Objectives 1.2 What is Computer? 1.2.1 History of Computers 1.2.2 Characteristics Of Computer System 1.2.3 Basic Applications of Computer
Course Title: PC Packages Credit Units: 02 Course Level: UG Course Code: CSIT115. Course Objectives: Pre-requisites: NIL. Course Contents/Syllabus:
Course Title: PC Packages Credit Units: 02 Course Level: UG Course Code: CSIT115 L T P/S SW/FW TOTAL CREDIT 1-2 - 02 Course Objectives: The aim of this course is : To Operate on various applications such
Basic Computer Course
Basic Computer Course KNOWING COMPUTER: - 3. What is Computer? Basic Applications of Computer 4. Components of Computer System Central Processing Unit Keyboard, mouse and VDU Other Input devices Other
MOUNTAIN VIEW SCHOOL DISTRICT
MOUNTAIN VIEW SCHOOL DISTRICT COMPUTERIZED BUSINESS APPLICATIONS Curriculum Content Frameworks 00 Curriculum Content Frameworks COMPUTERIZED BUSINESS APPLICATIONS Grade Levels: 9- Course Code: 90 Prerequisite:
A1-R3: IT TOOLS & APPLICATIONS
A1-R3: IT TOOLS & APPLICATIONS NOTE: 1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions. 2. PART ONE is to be answered in the TEAR-OFF ANSWER
BIM II IC3 & MOS Certification Pacing Guide
BIM II IC3 & MOS Certification Pacing Guide 1st 9 Weeks IC3 Certification Computer Fundamentals Mobile Devices Using cell phones, voicemail, SMS, notifications Hardware Device types, storage, networking,
Name of the Assistant/ Associate Professor:Annu Saini Class and Section:BCA 1 st sem Subject:Computer and Programming Fundamentals July 2018
Class and Section:BCA 1 st sem Subject:Computer and Programming Fundamentals July 2018 Ist week Day 1 IInd week Day 1 3rd week Day 1 Introduction to computers Definition and characteristics of computer
Glossary Unit 1: Hardware and Software
Glossary Unit 1: Hardware and Software 1. 2. Application software computer software created to allow the user to perform specific a job or task Examples: Word processing, Spreadsheets, Database, and Graphics
Microsoft Excel 2010 Level 1
Microsoft Excel 2010 Level 1 One Day Course Course Description You have basic computer skills such as using a mouse, navigating through windows, and surfing the Internet. You have also used paper-based
Contents. Introduction to Computer. Computer System
Contents Chapter 1 Introduction to Computer Introduction... 1 What is Computer?... 2 Characteristics of Computer... 2 Limitations of Computer... 4 Use of Computer (Application Fields of Computer)... 5
Many persons can work at a time on Super Computer. The first generation computer was developed in 1975.
(I) State True or False- Class X BASIC COMPUTER SUBJECT CODE 221 Objective Type Questions 1. The technology of Artificial Intelligence was used in second generation computer. Many persons can work at a
BHARATHIAR UNIVERSEITY, COIMBATORE. DIPLOMA IN OFFICE AUTOMATION. (for Community College)
Page 1 of 7 SCAA Dt. 23.03.2011 BHARATHIAR UNIVERSEITY, COIMBATORE. DIPLOMA IN OFFICE AUTOMATION (for Community College) (for the candidates admitted form the academic year 2010-11 onwards) SCHEME OF EXAMINATIONS
COMPUTER SCIENCE (ELECTIVE) Paper-A (100 Marks) Section-I: INTRODUCTION TO INFORMATION TECHNOLOGY Computer and its characteristics, Computer Organization & operation, Components of Computer, Input/Output
Microsoft PowerPoint level 1 course content (1-day)
http://www.multimediacentre.co.za Cape Town: 021 790 3684 Johannesburg: 011 083 8384 Microsoft PowerPoint level 1 course content (1-day) Course Description Microsoft Office PowerPoint Beginners course
ATOMIC ENERGY CENTRAL SCHOOLS MONTH WISE BREAKUP OF SYLLABUS ( ) SUBJECT: COMPUTER SCIENCE. Name of the lesson &Topics
CLASS: IV (21 ) (16 ) (6 ) Lesson 1: Computer Fundamentals Introduction,generation of computer & computer memory Lesson 1: Computer Fundamentals Bit and Byte, Microprocessor, Motherboard Lesson 2: Editing
Computer Application Practical
Computer Application Practical Periods / week-04 Total Mark :50 Total periods-60 Sessional : 25, Exam:25 Sl. No. Topic No. of periods 1 Basic Computer Operation 15 2 Word Processing 08 3 SPREADSHEET AND
Word Overview Page 3 Tables Page 5 Labels Page 9 Mail Merge Page 12. Excel Overview Page 19 Charts Page 22
Overview Page 3 Tables Page 5 Labels Page 9 Mail Merge Page 12 Excel Overview Page 19 Charts Page 22 PowerPoint Overview Page 26 Inserting Pictures and Sounds Page 30 Animation and Transitions Page 32
Learning Map Excel 2007
Learning Map Excel 2007 Our comprehensive online Excel tutorials are organized in such a way that it makes it easy to obtain guidance on specific Excel features while you are working in Excel. This structure
Creating a Web Presentation
LESSON 9 Creating a Web Presentation 9.1 After completing this lesson, you will be able to: Create an agenda slide or home page. Create a hyperlink to a slide. Create a Web presentation with the AutoContent
A Comprehensive Guide. IC3 - Module 1: Computing Fundamentals
Appendix A A Comprehensive Guide to IC 3 IC3 - Module 1: Computing Fundamentals Standardized Coding Number Objective 1.1 Objectives & Abbreviated Skill Sets Page Identify types of computers, how they process
Microsoft Excel Chapter 1. Creating a Worksheet and a Chart
Microsoft Excel 2013 Chapter 1 Creating a Worksheet and a Chart Objectives Describe the Excel worksheet Enter text and numbers Use the Sum button to sum a range of cells Enter a simple function Copy the
Dawood Public School Computer Studies Course Outline for Class VI. Course book- Right Byte 1 Fourth edition (Oxford University Press)
Dawood Public School Computer Studies Course Outline for 2017-2018 Class VI Course book- Right Byte 1 Fourth edition (Oxford University Press) Month wise Distribution of Course Work August The Evolution
Downloaded From :
04-012-2011 Test V Computer Knowledge 201. The operation of combining two cells into a single cell in Excel is referred to as (1) Join Cells (2) Merge Cells (3) Merge Table (4) Join Table 202. Which of
TABLE Semester I COMPUTER SCIENCE Semester II COMPUTER SCIENCE Semester III COMPUTER SCIENCE
TALE Semester I Semester II Semester III Semester IV Semester I Computer Fundamentals and Office Automation Unit 1 : Fundamentals of Computers: Computer definition Types of Computer Logical Organization
Basic Computer Training Course
Basic Computer Training Course Laherrère A. Perrodon Ivanhoe Masters (Designed for the school teachers of BCICT Programme implemented Schools) This book covers the following courses: Introduction to computer
Section A. 1. is the alignment where the text is aligned from the left edge and ragged from the right edge.
ICT GRAND WORKSHEET- CLASS-5 2 nd Term - 2014-15 Chapters 5, 6, 7, 8 and 9. Fill in the blanks with the correct answers. Section A 1. is the alignment where the text is aligned from the left edge and ragged
Microsoft Excel Chapter 1. Creating a Worksheet and an Embedded Chart
Microsoft Excel 2010 Chapter 1 Creating a Worksheet and an Embedded Chart Objectives Describe the Excel worksheet Enter text and numbers Use the Sum button to sum a range of cells Copy the contents of
Curriculum Guidebook: Technology Grades PreK
Basic Computer Concepts 001 Use and understand basic computer term "login" (or "log-in") X X X X 002 Use and understand basic computer term "cursor" X X X X 003 Use and understand basic computer term "Internet"
Computer Applications in Business /2019
Computer Applications in Business 1 2018/2019 Florida 8200520-2018/2019 This document provides the correlation between interactive e-learning curriculum, and the Computer Applications in Business 1 2018/2019
Study Guide. PCIC 3 B2 GS3- Key Applications-Excel. Copyright 2010 Teknimedia Corporation
Study Guide PCIC 3 B2 GS3- Key Applications-Excel Copyright 2010 Teknimedia Corporation Teknimedia grants permission to any licensed owner of PCIC 3 B GS3 Key Applications-Excel to duplicate the contents
3. Demonstrate knowledge of an emergency plan. SE/TE: 25-29, 31-35, 115, , , , 274; Related content found on ,
Course Standards for A. SAFETY The student will be able to: 1. Identify good work attitudes that affect safety on the job. SE/TE: 205-207, 223, 261-265 TE: CD Lesson 11: Teacher s Manual p. 3, Test 11A
Ministry of National Policies and Economic Affairs National Youth Corps. Curriculum of the Information Technology
Ministry of National Policies and Economic Affairs National Youth Corps Curriculum of the Information Technology Content 1 Introduction to computer 2 2 Number systems 3 3 Operating Systems 6 4 Word Processing
Computer Technology Study Guide for Final Exam
Name Computer Technology Study Guide for Final Exam Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Which of the following is NOT shown in the figure above?
Getting Started with. Office 2008
Getting Started with Office 2008 Copyright 2010 - Information Technology Services Kennesaw State University This document may be downloaded, printed, or copied, for educational use, without further permission
Q1. Describe the characteristic features of input and output devices of a computer system. [10]
![Q1. Describe the characteristic features of input and output devices of a computer system. [10]](/thumbs/93/112117841.jpg "Q1. Describe the characteristic features of input and output devices of a computer system. [10]")
Course: 1 st Sem. Of 3-year B.Sc. in H&HA Academic Year: 2017-2018 Q1. Describe the characteristic features of input and output devices of a computer system. [10] What is Topology? Discuss the various
Excel 2003 Tutorials - Video File Attributes
Using Excel Files 18.00 2.73 The Excel Environment 3.20 0.14 Opening Microsoft Excel 2.00 0.12 Opening a new workbook 1.40 0.26 Opening an existing workbook 1.50 0.37 Save a workbook 1.40 0.28 Copy a workbook
Microsoft Excel 2016 Level 1
Microsoft Excel 2016 Level 1 One Day Course Course Description You have basic computer skills such as using a mouse, navigating through windows, and surfing the Internet. You have also used paper-based
B.V. Patel Institute of Business Management, Computer & Information Technology, Uka Tarsadia University : Advanced Applications of MS-Office
Unit-1 MS-WORD Answer the following. (1 mark) 1. Which submenu contains the watermark option? 2. Which is used for the Cell merge in the table? 3. Which option creates a large capital letter at the beginning
ECDL Full Course Content
ECDL Full Course Content Module 1 1. Getting Started 1.1. Computer Terms 1.2. Computer Hardware 1.3. Computer Accessories 1.4. Memory and Storage 1.5. Computer Software 2. Using Information Technology
Govt. Polytechnic Education Society, Lisana (Rewari) LESSON PLANS 1 ST SEM. COMPUTER ENGINEERING
Govt. Polytechnic Education Society, Lisana (Rewari) LESSON PLANS 1 ST SEM. COMPUTER ENGINEERING 1.6 COMPUTER FUNDAMENTALS & INFORMATION TECNOLOGY Name of Faculty: Sh.Kuldeep Singh Discipline: computer
Computer Applications SLC 1) A computer can be defined as a set of tools that helps you perform information-processing tasks.
Computer Applications - 2006 SLC 1) A computer can be defined as a set of tools that helps you perform information-processing tasks. 2) Internal memory (RAM) holds software instructions and information
DEPARTMENT OF INFORMATION TECHNOLOGY KUMAUN UNIVERSITY, NAINITAL SEMESTER-I ( ) Scheme and syllabus for B.A./B. Sc. (Information Technology)
DEPARTMENT OF INFORMATION TECHNOLOGY KUMAUN UNIVERSITY, NAINITAL SEMESTER-I (2016-17) Scheme and syllabus for B.A./B. Sc. (Information Technology) Semester system course structure: 1. The course work shall
B.E. Publishing Correlations to The Office Specialist.com, 2E to Microsoft Office Specialist Word 2016 Core (77-725)
Correlations to The Office Specialist.com, 2E to Microsoft Office Specialist Word 2016 Core (77-725) B.E. Publishing Correlations to The Office Specialist.com, 2E to Microsoft Office Specialist Word 2016
Computer Applications Final Review COMPUTER BASICS REVIEW
Computer Applications Final Review COMPUTER BASICS REVIEW Look at the following picture and complete each statement below: 1. Label a above is referring to the: A. mouse B. Case C. CPU D. RAM 2. Label
Microsoft Excel 2013 Table of content
Microsoft Excel 2013 Table of content Chapter 1. New features in Excel 2013 New Excel Templates New Flash Fill New Pivot Table, Timeline, Slicer and etc New Quick Analysis Chapter 2. Start Working with
DEPARTMENT OF INFORMATION TECHNOLOGY KUMAUN UNIVERSITY, NAINITAL SEMESTER-I ( )
DEPARTMENT OF INFORMATION TECHNOLOGY KUMAUN UNIVERSITY, NAINITAL SEMESTER-I (2016-17) Scheme and syllabus for B. Com. (Information Technology) Note: - For B. Com., there will be one paper of 100 marks.
Excel 2007 Tutorials - Video File Attributes
Get Familiar with Excel 2007 42.40 3.02 The Excel 2007 Environment 4.10 0.19 Office Button 3.10 0.31 Quick Access Toolbar 3.10 0.33 Excel 2007 Ribbon 3.10 0.26 Home Tab 5.10 0.19 Insert Tab 3.10 0.19 Page
ALLAMA IQBAL OPEN UNIVERSITY ISLAMABAD (Department of Business Administration) COMPUTER APPLICATIONS FOR BUSINESS (184) CHECK LIST
Final on 13-3-2014 ALLAMA IQBAL OPEN UNIVERSITY ISLAMABAD (Department of Business Administration) COMPUTER APPLICATIONS FOR BUSINESS (184) CHECK LIST SEMESTER: SPRING 2014 This packet comprises following
M1-R4: IT TOOLS AND BUSINESS SYSTEMS
M1-R4: IT TOOLS AND BUSINESS SYSTEMS NOTE: 1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions. 2. PART ONE is to be answered in the TEAR-OFF
Year 8 Computing Science End of Term 3 Revision Guide
Year 8 Computing Science End of Term 3 Revision Guide Student Name: 1 Hardware: any physical component of a computer system. Input Device: a device to send instructions to be processed by the computer
OUTLINE OF THE AREAS COVERED IN THE UCTIT EXAM
OUTLINE OF THE AREAS COVERED IN THE UCTIT EXAM INTRODUCTION This ICT Certification test is aimed at assessing whether a person has the basic Information and Communication Technology (ICT) knowledge and
Base Module - Computer Essentials
Base Module - Computer Essentials This module sets out essential concepts and skills relating to the use of devices, file creation and management, networks, and data security. Understand key concepts relating
Microsoft Office. Microsoft Office
is an office suite of interrelated desktop applications, servers and services for the Microsoft Windows. It is a horizontal market software that is used in a wide range of industries. was introduced by
M1-R4: IT TOOLS AND BUSINESS SYSTEMS
M1-R4: IT TOOLS AND BUSINESS SYSTEMS NOTE: 1. There are TWO PARTS in this Module/Paper. PART ONE contains FOUR questions and PART TWO contains FIVE questions. 2. PART ONE is to be answered in the TEAR-OFF
SLO to ILO Alignment Reports
SLO to ILO Alignment Reports CAN - 00 - Institutional Learning Outcomes (ILOs) CAN ILO #1 - Critical Thinking - Select, evaluate, and use information to investigate a point of view, support a conclusion,
Syllabus KCXXXXXX: Excel Level I, Version 2010
Syllabus KCXXXXXX: Excel Level I, Version 2010 ITSW 1022 Introduction to Electronic Spreadsheets 8 classroom hours Course Description: This course is designed to introduce the student to basic spreadsheet
MICROSOFT EXCEL BIS 202. Lesson 1. Prepared By: Amna Alshurooqi Hajar Alshurooqi
MICROSOFT EXCEL Prepared By: Amna Alshurooqi Hajar Alshurooqi Lesson 1 BIS 202 1. INTRODUCTION Microsoft Excel is a spreadsheet application used to perform financial calculations, statistical analysis,
Microsoft Office Excel 2013 Courses 24 Hours
Microsoft Office Excel 2013 Courses 24 Hours COURSE OUTLINES FOUNDATION LEVEL COURSE OUTLINE Getting Started With Excel 2013 Starting Excel 2013 Selecting the Blank Worksheet Template The Excel 2013 Cell
Computer Training That Makes The Difference
Computer Training That Makes The Difference MICROSOFT EXCEL INTRODUCTION (LEVEL 1) A one-day course to introduce you to Excel and show you the basic functions of the program. Prerequisite Introduction
GOVERNMENT TECHNICAL EXAMINATIONS
GOVERNMENT OF TAMIL NADU DIRECTORATE OF TECHNICAL EDUCATION GOVERNMENT TECHNICAL EXAMINATIONS CERTIFICATE COURSE IN COMPUTER ON OFFICE AUTOMATION SYLLABUS CERTIFICATE COURSE IN COMPUTER ON OFFICE AUTOMATION
Master Degree Program Biomedical Engineering
Georgian Technical University Master Degree Program Biomedical Engineering Quiz- Basic Knowledge Test IT 1.MS OFFICE Is Application Software [A] True [B] False 2. Thesaurus tool in MS Word is used for...
Microsoft Office Excel 2007: Basic. Course Overview. Course Length: 1 Day. Course Overview
Microsoft Office Excel 2007: Basic Course Length: 1 Day Course Overview This course teaches the basic functions and features of Excel 2007. After an introduction to spreadsheet terminology and Excel's
EDHD Assessment of Technology Competencies EDTL minute Timed Assessment
EDHD assessment of Technology Competencies 1 EDHD Assessment of Technology Competencies EDTL 2300 50-minute Timed Assessment This assessment is performance-based in that you will use technology to create
Course Title: Microsoft Office ( 2016)
Course Title: Microsoft Office ( 2016) Duration : 2 days This program is designed for executives who are already have knowledge of Microsoft Office, and who would like to work with more very advanced features
MOVING AND COPYING DATA...
Overview NOTES... 2 OVERVIEW... 3 VIEW THE PROJECT... 5 USING FORMULAS... 6 BASIC EXCEL REVIEW... 6 ENTERING FORMULAS... 7 Typing formulas... 7 Clicking to insert cell references... 7 Using a simple cell
Base Module - Computer Essentials
Base Module - Computer Essentials This module sets out essential concepts and skills relating to the use of devices, file creation and management, networks, and data security. Understand key concepts relating
Office Administrator
DURATION: 40 hours Office Administrator COURSE FEES: 3300 (Inclusive All) OBJECTIVE: To give knowledge of basic computer operations. CONTENTS: The course covers the introduction to the evolution of computers,
Table of Contents Getting Started with Excel Creating a Workbook
Finney Learning Systems i Table of Contents Welcome........................... vii Copying the Student Files................ viii Setting up Excel to Work with This Course...... viii Lesson 1 Getting Started
('cre Learning that works for Utah STRANDS AND STANDARDS WEB DEVELOPMENT 1
STRANDS AND STANDARDS Course Description Web Development is a course designed to guide students in a project-based environment, in the development of up-to-date concepts and skills that are used in the
b. Enter the data in the following table. Begin to enter data in cell A1 and leave row 3 blank. The Total row label should appear in cell A10.
Apply Your Knowledge Complete the following exercises in order, as directed by your teacher. As you work through these projects, you will create four quarterly worksheets, a summary worksheet for annual
B. A. Semester I [Computer] Core Elective
![B. A. Semester I [Computer] Core Elective](/thumbs/95/125576082.jpg "B. A. Semester I [Computer] Core Elective")
Sub. Code Paper-I Paper-II Subject Name Computer Basics & IT Tools Practical Based On Computer Basics & IT Tools HEMCHANDRACHARYA NORTH GUJARAT UNIVERSITY, PATAN Faculty of Arts B. A. Semester I [Computer]
Business Computer Applications (BCIS 1305) Online. Credit: 3 semester credit hours (3 hours lecture)
1 Business Computer Applications (BCIS 1305) Online Credit: 3 semester credit hours (3 hours lecture) Prerequisite/Co-requisite: Complete the Online Orientation and answer yes to 7+ questions on the Online
Excel 2010 Tutorials - Video File Attributes
Get Familiar with Excel 2010 42.30 2.70 The Excel 2010 Environment 4.10 0.18 Quick Access Toolbar 3.10 0.27 Excel 2010 Ribbon 3.10 0.26 File Tab 3.10 0.28 Home Tab 5.10 0.17 Insert Tab 3.10 0.18 Page Layout
Angel International School - Manipay 2 nd Term Examination March, 2018 Ict
c Grade 10 Angel International School - Manipay 2 nd Term Examination March, 2018 Ict Duration: 03:00 Hours Index No:- Part I 1) A computer that is optimized to provide services to other computers over
Reference Services Division Presents. Excel Introductory Course
Reference Services Division Presents Excel 2007 Introductory Course OBJECTIVES: Navigate Comfortably in the Excel Environment Create a basic spreadsheet Learn how to format the cells and text Apply a simple
For more tips on using this workbook, press F1 and click More information about this template.
Excel: Menu to ribbon reference To view Office 2003 menu and toolbar commands and their Office 2010 equivalents, click a worksheet tab at the bottom of the window. If you don't see the tab you want, right-click
Data Should Not be a Four Letter Word Microsoft Excel QUICK TOUR
Toolbar Tour AutoSum + more functions Chart Wizard Currency, Percent, Comma Style Increase-Decrease Decimal Name Box Chart Wizard QUICK TOUR Name Box AutoSum Numeric Style Chart Wizard Formula Bar Active
Computer Business Office Technology SLO to PLO Alignment(No Results)_February 2017
Computer Business Office Technology SLO to PLO Alignment(No Results)_February 2017 CAN Program - Computer Business Office Technology Develop the computer skills and confidence to obtain employment. CAN
The City School PAF Chapter Comprehensive Worksheet December 2015 ICTech Class 7 Candidate Name: Index Number: Section: Branch/Campus: Date:
The City School PAF Chapter Comprehensive Worksheet December 2015 ICTech Class 7 Candidate Name: Index Number: Section: Branch/Campus: Date: Maximum Marks: 50 Time Allowed: 2 hours INSTRUCTIONS: Write
SAS (Statistical Analysis Software/System)
SAS (Statistical Analysis Software/System) SAS Analytics:- Class Room: Training Fee & Duration : 23K & 3 Months Online: Training Fee & Duration : 25K & 3 Months Learning SAS: Getting Started with SAS Basic
ICT GRAND WORKSHEET- CLASS-5. Section A. 2 nd Term Chapters 5, 6, 7, 8 and 9. Fill in the blanks with the correct answers.
ICT GRAND WORKSHEET- CLASS-5 2 nd Term - 2014-15 Chapters 5, 6, 7, 8 and 9. Section A Fill in the blanks with the correct answers. 1. Left is the alignment where the text is aligned from the left edge
SAS (Statistical Analysis Software/System)
SAS (Statistical Analysis Software/System) Clinical SAS:- Class Room: Training Fee & Duration : 23K & 3 Months Online: Training Fee & Duration : 25K & 3 Months Learning SAS: Getting Started with SAS Basic