KEYCREATOR 3D Direct Modeling Software
|
|
- Noreen Charles
- 6 years ago
- Views:
Transcription
1 KeyCreator Lesson KC9203 BOM Creation with Part References In this exercise, we ll create a Bill of Material (BOM) and balloons for the simple assembly illustrated to the right. This is an assembly using Part References. We ll start with a new file in View 1. (The Top View.) STEP ONE: If you have never used the BOM function before on a particular computer, you will have to create a system variable (KCBOM10) to act as a guide to find the files on your system. Highlight the MY COMPUTER Icon on your computer and Right Mouse Click on it. Then, click on the PROPERTIES Option in the menu that appears. A Dialog Box appears. Click on the ADVANCED Tab. A new Dialog appears. Click on the NEW Button. Enter KCBOM10 for the Variable Name. For the value, enter the full path name to your CKD/BOM directory. Click on OK s working outward until you return to your main screen. KUBOTEK Freedom and Precision 1
2 STEP TWO: Creating the Assembly Let s quickly create an assembly using some standard parts. (The parts we ll use are described in lesson KC9201. If you haven t done that lesson yet, now is a good time to do that.) Click on the CREATE REFERENCE Icon. A Dialog Box appears. Select the 0Base File and then click on the OPEN Button. The 0Base part will be our ground part, so you should have no checks on the three Associative Options at the top of the Dialog Box. Check the Use Current Cplane Option, Animate Placement Option, and the Key In Rotation Option. The Rotation Angle should be 0. Hit the ENTER Key. Click on the KeyIn Option and hit the ENTER Key three times to position the reference at the origin. Then, switch to the Isometric View. (View 7.) KUBOTEK Freedom and Precision 2
3 Click on the CREATE REFERENCE Icon again. This time, select the 0Bracket file and click on the OPEN Button. This time, place checks on the Associative Insertion Plane and Associative Position Options. Then, hit the ENTER Key. Click on the EndEnt Option on the Conversation Bar. As you move the cursor over the screen, notice that the Bracket is oriented flat to the screen. Click on the CONSTRUCTION PLAN Icon and select the top face of the base part. Notice that the bracket reorients properly. Click on the top, left, front corner of the base part. Your screen should now look like this: Take a moment to save it as 0BracketAssy1. Continue populating the assembly, adding two 0Screw references, one 0Shaft reference, and one 0Wheel reference. When you are done you should have an assembly like this: KUBOTEK Freedom and Precision 3
4 STEP THREE: Now, let s populate the BOM. Click on the TOOLS Pulldown Menu, then on BOM and TABLE, and finally on CREATE A BOM. A large Dialog Box appears. Click on the ADD Button at the bottom, left corner of the box. Then, click on the ellipsis to the right of the Template field. Navigate to the BOM Folder that is located within your CKD Folder in KeyCreator. Then, select the BOM Template Sample NA Filename Option and click on the OPEN Button. Then, click on the OK Button. KUBOTEK Freedom and Precision 4
5 Click on the + sign in front of the BOM Entry in the Dialog Box. Then, click on the Data Entry. Click on the Add/Remove Entity Button. You are returned to the viewport. Click on the ALL DSP Option an then the ALL Option. Hit the ENTER Key. You are returned to the Dialog Box. Notice that the BOM Fields are now populated with all of the part references. STEP FOUR: Let s configure our Balloon Notes. Click on the Balloon Configuration Option on the left side of the Dialog Box. They say variety is the spice of life! so let s select a hexagonal style balloon! KUBOTEK Freedom and Precision 5
6 STEP FIVE: To Place Balloons, click on the Data Entry on the left side of the Dialog Box. Then, highlight all of the rows in the BOM Field. Click on the Add Balloon Button. You are returned to the Viewport. Notice that Wheel is highlighted. Click on the wheel to set the arrow tip location then move the cursor out and click to set the balloon. Your first balloon is placed. Now click on the SKIP Button on the Conversation Bar. Notice that the Shaft Highlights. Place a balloon on the shaft and click on the SKIP Button. The two screws highlight next. Place a balloon on each screw and THEN click on the SKIP Button. KUBOTEK Freedom and Precision 6
7 Next, place a balloon on the bracket, click on the SKIP Button, and place a balloon on the block. Then, click on the ACCEPT Button. Your screen should look like this: STEP SIX: Placing the table. Click on the OUTPUT Option on the left side of the Dialog Box. Then, click on the POSITION TABLE Button. You are returned to the Viewport. Move the cursor and a ghost table follows. Click to place the BOM Table. Your screen should look like this: (Note, we placed the table and balloons in model space. We could just as easily have placed these details in an associated layout.) Don t forget to save your file. KUBOTEK Freedom and Precision 7
KEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC5107 Graft The Graft Function is a powerful partner to the Prune Function that we used earlier. You will typically use the Graft Function immediately after performing a pruning operation
More informationKEYCREATOR 3D Direct Modeling Software
KeyCreator Lesson KC8192 Engraving Text on a Cylindrical Surface In this exercise we ll create a tool path to engrave text on a cylindrical surface. Start with a new file in view 2. (The Front View.) Click
More informationBenefits. Interoperability. Control
1 Benefits KeyCreator 2012 V11.5 is a minor release providing interoperability updates, a half-dozen new functions, a dozen enhancements, and correction of over 90 issues since the 11.3.1 service pack.
More informationBenefits. Control. KeyCreator V11.3 features
1 Benefits KeyCreator 2012 V11.3 is an important update addressing performance issues with drawing view creation. The release also provides interoperability updates, a dozen small enhancements in KeyCreator
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
More informationTables in Microsoft Word
Tables in Microsoft Word In this lesson we re going to create and work with Tables in Microsoft Word. Tables are used to improve the organisation and presentation of data in your documents. If you haven
More informationDoctor Walt s Tips and Tricks # 37 Creating an Elbow Configurator Using Dynamic Face
1 Doctor Walt s Tips and Tricks # 37 Creating an Elbow Configurator Using Dynamic Face Feature-Based Solid Modelers harp on the fact that they can be used to create fancy part configurators to make families
More informationChanges from SolidWorks 2003 to SolidWorks 2004
Changes from SolidWorks 2003 to SolidWorks 2004 The changes from SolidWorks 2003 to SolidWorks 2004 are primarily cosmetic. Consequently, it is quite easy to use the current edition of Learning SolidWorks
More informationChapter 4 Feature Design Tree
4-1 Chapter 4 Feature Design Tree Understand Feature Interactions Use the FeatureManager Design Tree Modify and Update Feature Dimensions Perform History-Based Part Modifications Change the Names of Created
More informationIntegrated Architecture Builder, PLC-to-ControlLogix Migration Hands-On Lab
Integrated Architecture Builder, PLC-to-ControlLogix Migration Hands-On Lab For support or to comment, send e-mail to iab_support@ra.rockwell.com Integrated Architecture Builder, PLC-to-ControlLogix Migration
More informationMicrosoft Word - Templates
Microsoft Word - Templates Templates & Styles. Microsoft Word come will a large amount of predefined templates designed for you to use, it is also possible to download additional templates from web sites
More informationWeek 5 Creating a Calendar. About Tables. Making a Calendar From a Table Template. Week 5 Word 2010
Week 5 Creating a Calendar About Tables Tables are a good way to organize information. They can consist of only a few cells, or many cells that cover several pages. You can arrange boxes or cells vertically
More informationMicrosoft PowerPoint 2002
Microsoft PowerPoint 2002 Creating a New Presentation Upon opening, PowerPoint 2002 will display a blank title slide for a new presentation. You can begin creating a PowerPoint presentation by typing the
More informationIntroduction. Inserting and Modifying Tables. Word 2010 Working with Tables. To Insert a Blank Table: Page 1
Word 2010 Working with Tables Introduction Page 1 A table is a grid of cells arranged in rows and columns. Tables can be customized and are useful for various tasks such as presenting text information
More informationPowerPoint Tips and Tricks
PowerPoint Tips and Tricks Viewing Your Presentation PowerPoint provides multiple ways to view your slide show presentation. You can access these options either through a toolbar on your screen or by pulling
More informationWILDFIRE 3.0. Sheetmetal Assembly of a Bucket. Yves Gagnon, M.A.Sc. SDC
INTRODUCTION TO PRO/SHEETMETAL WILDFIRE 3.0 Sheetmetal Assembly of a Bucket Yves Gagnon, M.A.Sc. SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Estimated time:
More informationWILDFIRE 4.0. Sheetmetal Assembly of a Bucket. Yves Gagnon, M.A.Sc. SDC
INTRODUCTION TO PRO/SHEETMETAL WILDFIRE 4.0 Sheetmetal Assembly of a Bucket Yves Gagnon, M.A.Sc. SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Estimated time:
More informationWorking with the Dope Sheet Editor to speed up animation and reverse time.
Bouncing a Ball Page 1 of 2 Tutorial Bouncing a Ball A bouncing ball is a common first project for new animators. This classic example is an excellent tool for explaining basic animation processes in 3ds
More informationGrade: 7 Lesson name: Creating a School News Letter Microsoft Word 2007
Grade: 7 Lesson name: Creating a School News Letter Microsoft Word 2007 1. Open Microsoft Word 2007. Word will start up as a blank document. 2. Change the margins by clicking the Page Layout tab and clicking
More informationUsing Dreamweaver. 4 Creating a Template. Logo. Page Heading. Home About Us Gallery Ordering Contact Us Links. Page content in this area
4 Creating a Template Now that the main page of our website is complete, we need to create the rest of the pages. Each of them will have a layout that follows the plan that is shown below. Logo Page Heading
More informationAutodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationWorking with Plan Production ObjectsChapter1:
Chapter 1 Working with Plan Production ObjectsChapter1: The lessons in this chapter guide you through the processes of creating and working with plan production objects. Plan production objects include
More informationFig. 2 Mastercam 2020 Spinning Top SW 19 to MCam20 TOOLPATHS Page 13-1
Mastercam 2020 Chapter 13 Spinning Top SOLIDWORKS 19 to Mastercam 2020 A. Open File in Mastercam 2020. Step 1. If necessary, save your Handle and Flywheel parts file in SOLIDWORKS. Step 2. In Mastercam
More informationSince you can designate as many symbols as needed as baseline symbols it s possible to show multiple baselines with unique symbology.
In this lesson you will learn how to: Tutorials Lesson 17 - Work with a Baseline Set up the symbols and bars used to display a baseline using the Baseline Setup Wizard. Insert a baseline. Highlight, lock
More informationParametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationSection 1-3A: Creating a hierarchically numbered list style
Section 1-3A: Creating a hierarchically numbered list style The key to making automatically numbered headings is to create a numbered list style and then link it to the relevant Heading styles. Here we
More informationChapter 20 Assembly Model with VEX Robot Kit - Autodesk Inventor
Tools for Design Using AutoCAD and Autodesk Inventor 20-1 Chapter 20 Assembly Model with VEX Robot Kit - Autodesk Inventor Creating an Assembly Using Parts from the VEX Robot Kit Understand and Perform
More informationSpring Assembly. in the Begin Assembly Property. on the Standard toolbar and click Add-Ins.
Chapter 2 Spring Assembly A. Create New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Cancel Manager. in the Begin Assembly Property B. Enable Toolbox Browser. Step 1. If
More informationCompare and Merge Track Changes
Compare and Merge Track Changes Course Description The document you have been working on for a couple of weeks is finally finished. Before sending the document to its final destination to be published,
More informationThe Basics of PowerPoint
MaryBeth Rajczewski The Basics of PowerPoint Microsoft PowerPoint is the premiere presentation software. It enables you to create professional presentations in a short amount of time. Presentations using
More informationSOLIDWORKS: Lesson 1 - Basics and Modeling. Introduction to Robotics
SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals Introduction to Robotics SolidWorks SolidWorks is a 3D solid modeling package which allows users to develop full solid models in a simulated environment
More informationGetting Started with ShowcaseChapter1:
Chapter 1 Getting Started with ShowcaseChapter1: In this chapter, you learn the purpose of Autodesk Showcase, about its interface, and how to import geometry and adjust imported geometry. Objectives After
More informationTips & Tricks #66 Working with Online Calculator Variables
Tips & Tricks #66 Working with Online Calculator Variables In the course of training legions of CADKEY and KeyCreator users over the years, I ve discovered that many of you miss out on some of the neat
More informationBlocks reduce drawing size since multiple instances of a block are stored in one definition.
AGENDA: 1. Blocks and Controlling Block Properties 2. Creating and Inserting Blocks 3. Editing Blocks after Insertion 4. Storing Blocks Blocks A block is a collection of entities, grouped together and
More informationMastercam X6 for SolidWorks Toolpaths
Chapter 14 Spinning Top Mastercam X6 for SolidWorks Toolpaths A. Insert Handle in New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Browse in the Property Manager, Fig.
More informationDrawing Tips ME170. Instructor: Mike Philpott (
Drawing Tips Instructor: Mike Philpott (email: mphilpot@illinois.edu) Configuration of Creo Prepare Creo for drawing creation. - Open Creo Parametric 3.0 from the Start Menu. - Set your working directory.
More informationMicrosoft Word. An alternative to following these steps are to double click on the Microsoft Word Icon on the desktop.
Microsoft Word To access this Lesson Plan on-line, open up the library website www.bellevillelibrary.com and go to the tab that reads Adults. Scroll down and click on FREE Computer Lessons. On this page
More informationSOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationTRAINING GUIDE WCS-PART-1
TRAINING GUIDE WCS-PART-1 Mastercam Training Guide Objectives The learner will create the geometry for WCS-Part-1. This Lesson will cover the following topics: Create a 3-dimensional drawing by: Creating
More informationCreating a Mail Merge Document
Creating a Mail Merge Document 1. Set up your Data in an Excel spreadsheet Each column should represent a particular category of information to be included in the Mail Merge. In this example the First
More informationFOCUS ON REAL DESIGN AUTOMATE THE REST CUSTOMTOOLS EXCEL REPORTING
FOCUS ON REAL DESIGN AUTOMATE THE REST CUSTOMTOOLS EXCEL REPORTING Table of Contents EXCEL REPORTING... 3 Introduction... 3 What does it do?... 3 How does it work?... 3 How can you use it?... 3 Adding
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More informationSolid Modeling SolidWorks Layout. ENGR 1182 SolidWorks 01
Solid Modeling SolidWorks Layout ENGR 1182 SolidWorks 01 Solid Modeling In The Real World Mechanical and Aerospace engineers need solid models of jet engine components and assemblies to do analysis on
More informationAutodesk Inventor 2018
Parametric Modeling with Autodesk Inventor 2018 NEW Contains a new chapter on 3D printing Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationBoat. Battery Holder AA
Chapter 9 Boat Battery Holder AA A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch context toolbar, Fig. 1. Step 3. Click
More informationMicrosoft Office 2016 Mail Merge
Microsoft Office 2016 Mail Merge Mail Merge Components In order to understand how mail merge works you need to examine the elements involved in the process. In any mail merge, you'll deal with three different
More informationAccess Review. 4. Save the table by clicking the Save icon in the Quick Access Toolbar or by pulling
Access Review Relational Databases Different tables can have the same field in common. This feature is used to explicitly specify a relationship between two tables. Values appearing in field A in one table
More informationTUTORIAL 2. OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs.
TUTORIAL 2 OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs. GETTING STARTED: 1. Open the SolidWorks program. 2. Open a new part file.
More informationParametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationIn this lesson you will learn how to:
LESSON 5: CREATING BUTTON STATES OBJECTIVES In this lesson you will learn how to: use FreeHand layers to create navigation buttons export layers from FreeHand to Flash create and edit symbols and instances
More informationChapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor
Tools for Design Using AutoCAD and Autodesk Inventor 19-1 Chapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor Create and Use Subassemblies in Assemblies Creating an
More informationIM10025 Inventor Flexible Tube and Pipe: How to be a Hoser
IM10025 Inventor Flexible Tube and Pipe: How to be a Hoser Blair Alan Stunder Arctic Manufacturing Ltd. Learning Objectives Tube and Pipe Template Management System and BOM Settings Particular to T & P
More informationAutodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
More informationBottle Rocket. Drawing. on the Com- on the View Layout
Chapter 6 Bottle Rocket Drawing A. Insert Views. Step 1. Click File Menu > New, click Drawing Metric and OK. on the Com- Step 2. Click View Layout mand Manager toolbar. Step 3. Click Model View toolbar.
More informationIU Kokomo Career and Accessibility Center
Creating an Accessible Syllabus in Microsoft Word Incorporating the use of headings and a table of contents (if needed) in your syllabus will make the document increasingly accessible to all students.
More informationTRAINING GUIDE WCS - VIEW MANAGER - PART-2
TRAINING GUIDE WCS - VIEW MANAGER - PART-2 Mastercam Training Guide Objectives The learner will create the geometry and toolpaths for WCS-Part-2. This Lesson will cover the following topics: Create a 3-dimensional
More informationBeginner s Training Manual
Table of Contents Designing an App... 2 Modify Existing App... 12 Adding a Database... 13 Adding Controls to an Activity... 17 Activity Controls: Logic and Setup... 21 System Settings... 27 Designing the
More informationPage Numbering for a Thesis or Dissertation with NO Copyright Page
Page Numbering for a Thesis or Dissertation with NO Copyright Page Tip: Add Page Numbering to your document after you are finished making all edits. After the page numbering has been added, then add the
More informationLab Assignment #1: Introduction to Creo ME 170
Lab Assignment #1: Introduction to Creo ME 170 Instructor: Mike Philpott (email: mphilpot@illinois.edu) Date Due: One week from Start Day of Lab (turn in deadline 11pm night before next lab) Make sure
More informationShopping Cart: Queries, Personalizations, Filters, and Settings
Shopping Cart: Queries, Personalizations, Filters, and Settings on the Shopping Cart Home Page Use this Job Aid to: Learn how to organize the Shopping Cart home page so that it is easier to use. BEFORE
More informationUsing Styles In Microsoft Word 2002
INFORMATION SYSTEMS SERVICES Using Styles In Microsoft Word 2002 This document contains a series of exercises in the use of styles in the Microsoft Word 2002 word processing software. AUTHOR: Information
More informationMicrosoft Excel 2010 Basic
Microsoft Excel 2010 Basic Introduction to MS Excel 2010 Microsoft Excel 2010 is a spreadsheet software in the new Microsoft 2010 Office Suite. Excel allows you to store, manipulate and analyze data in
More informationDeveloping Interactive Lectures with PowerPoint 2007
Intermediate PowerPoint Developing Interactive Lectures with PowerPoint 2007 [Type the document subtitle] 2 P age Table of Contents Customize Slide Theme and Background... 2 Apply Animated Effects... 3
More informationExercise 1. Section 2. Working in Capture
Exercise 1 Section 1. Introduction In this exercise, a simple circuit will be drawn in OrCAD Capture and a netlist file will be generated. Then the netlist file will be read into OrCAD Layout. In Layout,
More informationPenny Hockey SOLIDWORKS 17 to Mastercam 2017 A. Open File in Mastercam Step 1. If necessary, save your BASE file in SOLIDWORKS.
Mastercam 2017 Chapter 22 Chapter 7 Penny Hockey SOLIDWORKS 17 to Mastercam 2017 A. Open File in Mastercam 2017. Step 1. If necessary, save your BASE file in SOLIDWORKS. Step 2. In Mastercam 2017, click
More informationGetting Started with. PowerPoint 2010
Getting Started with 13 PowerPoint 2010 You can use PowerPoint to create presentations for almost any occasion, such as a business meeting, government forum, school project or lecture, church function,
More informationFinite Element Model of a 3-D Clevis
LESSON 4 Finite Element Model of a 3-D Clevis Objectives: Apply a nonuniform mesh seed near a critical location of the model. Apply a global mesh to the seeded model. PATRAN 303 Exercise Workbook - Release
More informationScene Assembly CHAPTER 4
CHAPTER 4 Scene Assembly Scene assembly in the 3ds Max production pipeline is the process of tracking and assembling your scene assets for the complete presentation. A typical production workflow usually
More informationAnimations in Creo 3.0
Animations in Creo 3.0 ME170 Part I. Introduction & Outline Animations provide useful demonstrations and analyses of a mechanism's motion. This document will present two ways to create a motion animation
More informationUse signatures in Outlook 2010
Use e-mail signatures in Outlook 2010 Quick Reference Card Download and use a signature template Note This procedure will take you away from this page. If necessary, print this page before you follow these
More informationOur Goals Teaching with Power Point
Our Goals Teaching with Power Point October 14, 2003 Create a new presentation. Add text, graphics,charts, and tables. Apply transitions. Insert hyperlinks such as: http://www.hamline.edu Goals Continued
More informationIntermediate Microsoft Office 2016: Word
Intermediate Microsoft Office 2016: Word Updated January 2017 Price: $1.20 Lesson 1: Setting Margins A margin is the distance from the text to the paper s edge. The default setting is 1 all around the
More informationIRONCAD SUPPLEMENTAL DRAWING & DRAFT 101
Supplementary to IRONCAD Getting Started Guide on creating drawing or drafting sheets from part/s from a working scene, title blocks and adding BOM column feature. What will be shown are step by step screen
More informationLinking a Table to Excel Data
AutoCAD and Its Applications BASICS Supplemental Material Chapter 21 Linking a Table to Excel Data You can use existing data entered in a Microsoft Excel spreadsheet or a CSV (comma-separated) file to
More informationm ac romed ia D r e a mw e av e r Curriculum Guide
m ac romed ia D r e a mw e av e r Curriculum Guide 1997 1998 Macromedia, Inc. All rights reserved. Macromedia, the Macromedia logo, Dreamweaver, Director, Fireworks, Flash, Fontographer, FreeHand, and
More informationLesson 5: Board Design Files
5 Lesson 5: Board Design Files Learning Objectives In this lesson you will: Use the Mechanical Symbol Editor to create a mechanical board symbol Use the PCB Design Editor to create a master board design
More informationLesson 12 Bottom-Up Assembly Modeling
Lesson 12 Bottom-Up Assembly Modeling Upon successful completion of this lesson, you will be able to: Create a new assembly. Insert components into an assembly using all available techniques. Add mating
More informationCO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
More informationHow to do a "Mail Merge" from a Calc spreadsheet.
How to do a "Mail Merge" from a Calc spreadsheet. provided by the OpenOffice.org Documentation Project OpenOffice.org Documentation Project How-To Table of Contents 1. Creation of the Database Source...3
More informationEXERCISE 2: MODELING MINOAN COLUMNS
Minoan Column at the Palace of Minos, Crete CARLI Digital Collections EXERCISE 2: MODELING MINOAN COLUMNS ASSIGNMENT: In this exercise you will create an architectural element, a Minoan shaped column,
More informationAutodesk Inventor 2016 Learn by doing. Tutorial Books
Autodesk Inventor 2016 Learn by doing Tutorial Books Copyright 2015 Kishore This book may not be duplicated in any way without the express written consent of the publisher, except in the form of brief
More informationExercise 2a: Load, Animate and Review a Model
Exercise 2a: Load, Animate and Review a Model This exercise uses the file bumper_deck.key and the corresponding d3plot. Step 1: Load the solver input and result files, bumper_deck.key and d3plot. 1. From
More informationPowerPoint X. 1. The Project Gallery window with the PowerPoint presentation icon already selected. 2. Click on OK.
PowerPoint X Launching PowerPointX 1. Start PowerPointX by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft PowerPoint. PowerPoint
More informationColumn - solid section
1 Column - solid section This example demonstrates how how to design a column with an arbitrary cross-section defined by the user. The model is a simple one member column, loaded with an axial load and
More informationParametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationIntroduction. Getting Started. Selecting a Template. 1 of 1
1 of 1 Introduction Visual materials are one of the most effective means of communicating a message. They can give a presentation a professional quality. Visuals help a speaker to be well prepared, organized,
More informationSetup Mount the //geobase/geo4315 server and add a new Lab2 folder in your user folder.
L AB 2 L AB M2 ICROSOFT E XCEL O FFICE W ORD, E XCEL & POWERP OINT XCEL & P For this lab, you will practice importing datasets into an Excel worksheet using different types of formatting. First, you will
More informationTerminal. Chapter 16. E-Car. A. Component from Design Library. SOLIDWORKS 17 Terminal E-CAR Page 16-1
Chapter 16 E-Car Terminal A. Component from Design Library. Step 1. Click the Design Library tab in the Task Pane (right side of graphics area), Fig. 1. Step 2. Expand routing and click electrical folder
More information2. This will bring you to a new window asking what type of policy you are inserting. Personal Policies. Commercial Policies. All Other Policies
How to Insert a New Client File To insert a new client file you can do this one of two ways. The first way is to manually insert the client file through Hawksoft. You would use this method if you are writing
More informationKubotek KeyCreator V8.5 What s New Page 1 of 12. Kubotek KeyCreator V8.5 What s New
Page 1 of 12 Kubotek KeyCreator V8.5 What s New Page 2 of 12 Table of Contents File Management 3 General Interface 4 Detailing/Drawing 5 Modeling 10 Display and Graphics 12 Page 3 of 12 File Management
More informationLearning. Modeling, Assembly and Analysis SOLIDWORKS Randy H. Shih SDC. Better Textbooks. Lower Prices.
Learning SOLIDWORKS 2016 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationQuick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3
Quick Start Guide - Contents Opening Word... 1 Locating Big Lottery Fund Templates... 2 The Word 2013 Screen... 3 Things You Might Be Looking For... 4 What s New On The Ribbon... 5 The Quick Access Toolbar...
More informationPLAY VIDEO. 2. Select Cell Library File menu > New item to display the Create Cell Library dialog.
Chapter 12 Cells PLAY VIDEO INTRODUCTION A cell is a group of elements combined into one complex element and stored in a cell library or in your design file as a shared cell. Any cell can be easily recalled
More informationREMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB!
CS 1033 Multimedia and Communications Lab 8: Animation with Video Timeline REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! LAB #8 - Exercise 1 Objectives: Upon completion of Exercise 1 you should be
More informationSpur Gears Static Stress Analysis with Linear Material Models
Exercise A Spur Gears Static Stress Analysis with Linear Material Models Beam and Brick Elements Objective: Geometry: Determine the stress distribution in the spur gears when a moment of 93.75 in-lb is
More informationIntroduction to Microsoft FrontPage
Platform Windows PC Ref no: ins069 Date: 2006 Version: 1 Authors: S. Coates Introduction to Microsoft FrontPage What is Microsoft FrontPage? Microsoft FrontPage is an web authoring tool that can be used
More informationAdvanced PowerPoint. Course Description. Objectives: Using Master Slides. Using a Notes Master and a Handout Master. Add a Picture to a master
Course Description Advanced PowerPoint In the PowerPoint Introduction course, you learned how to create a new presentation, work with text objects, insert objects to enhance the presentation, add a background
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationLesson 21 Getting Started with PowerPoint Essentials
Getting Started with PowerPoint Essentials Computer Literacy BASICS: A Comprehensive Guide to IC 3, 4 th Edition 1 Objectives Identify the parts of the PowerPoint screen and navigate through a presentation.
More information