Position switches FD series

Transcription

1 Position switches FD series Selection diagram Ø 8 mm Ø 1, mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere adjustable lever safety adjustable lever bistable bistable ACTUATORS CONTACT BLOCKS slow action slow action slow action snap action snap action snap action slow action slow action and slow action NO+ +1NC x() slow action slow action slow action slow action slow action snap action independent closer slow action electronic CONDUIT ENTRY Threaded conduit entry PG 1,5 (standard) M Mx1,5 With assembled cable gland for Ø 6 to Ø 1 mm K1 cables range for Ø to Ø mm K5 cables range With M1 metal connector assembled and wired K 8 poles from bottom K 5 poles from bottom page / General Catalog 0-08

2 Position switches FD series stainless steel roller lever external rubber gasket stainless steel roller lever stainless steel round rod square rod glass fibre rod porcelain roller 6 58 rope switches for signalling without actuator without actuator LOOSE ACTUATORS See page /11 Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. Housing FD metal housing, one conduit entry 5, snap action 6, slow action, slow action article options FD -1GMK Preinstalled cable gland or connectors no cable gland or connector (standard) K1 with assembled cable gland suitable for Ø 6 to Ø 1 mm cables range K with M1 metal connector assembled and wired, 8 poles (only for contact blocks,, 1, ) For the complete list of all combinations, please contact our technical office. Actuators 01 short plunger 0 roller lever 05 offset roller lever Suffix no suffix (standard) 1 4 with Ø mm stainless steel roller for actuators 0, 05,, 5, 51, 5, 56, 5, 41, 4 with Ø 5 mm polymer roller (see special loose actuators on page /1) with Ø mm rubber roller (see special loose actuators on page /1) with Ø mm overhanging rubber roller (see special loose actuators on page /1) Threaded conduit entry PG 1,5 (standard) M Mx1,5 Contacts type silver contacts (standard) G silver contacts gold plated 1 µm (contact block excluded) General Catalog 0-08 page /4

3 Position switches FD series Technical data Housing Metal housing, coated with baked epoxy powder One threaded conduit entry Protection degree: IP6 General data Ambient temperature: from -5 C to +80 C Version for operation in ambient temperature from - C to +80 C on request Max operating frequency: 0 operations cycles 1 /hour Mechanical endurance: million operations cycles 1 Assembling position: any (1) One operation cycle means two movements, one to close and one to open contacts, as foreseen by IEC standard. Main data Metal housing, one conduit entry Protection degree IP6 1 contact blocks available 8 actuators available M1 assembled connector versions Silver contacts gold plated versions Cross section of the conductors (flexible copper wire), 1,,, 4: min. 1 x 0,4 mm (1 x AWG ) max. x 1,5 mm ( x AWG ) 5, 6,, 9,, 11, 1, 1, 14,,, 18: min. 1 x 0,5 mm (1 x AWG ) max. x,5 mm ( x AWG 14) Contact block : min. 1 x 0,5 mm (1 x AWG ) max. x 1,5 mm ( x AWG ) In conformity with standards: IEC , EN , EN 041, IEC 4-1, EN 4-1, EN 88, EN ISO 10-1, EN ISO 10-, IEC 59, EN 59, NFC 6-1, VDE 06-0, VDE 011, CENELEC EN 01. Approvals: IEC , UL 8, GB Markings and quality marks: Approval IMQ: EG5 Approval UL: 8 Approval CCC: 000 Approval EZU: 1 In conformity with requirements requested by: Low Voltage Directive 06/95/EC, Machinery Directive 06/4/EC and Electromagnetic Compatibility 04/8/EC. Positive contact opening in conformity with standards: IEC , EN , VDE Installation for safety applications: Use only switches marked with the symbol. The safety circuit must always be connected with the NC contacts (normally closed contacts: 11-1, 1- or -) as stated in the standard EN , encl. K, par.. The switch must be actuated with at least up to the positive opening travel shown in the travels diagrams on page 6/4. The switch must be actuated at least with the positive opening force, shown in brackets, underneath each article, near the value of the min. force. If not expressly indicated in this chapter, for the right installation and the correct utilization of all articles see requirements indicated from page 6/1 to page 6/8. Electrical data Utilization categories without connector Thermal current (Ith): A Rated insulation voltage (Ui): 0 VAC 0 VDC 0 VAC for contact blocks, 1,,, 4 Protection against short circuits: fuse A 0 V type am Pollution degree: Alternate current: AC (... Hz) Ue (V) 0 0 Ie (A) Direct current: DC1 Ue (V) 4 15 Ie (A) 6 1,1 0,4 with 5 poles M1 connector Thermal current (Ith): 4 A Rated insulation voltage (Ui): VAC 0 VDC Protection against short circuits: fuse 4 A 0 V type gg Pollution degree: Alternate current: AC (... Hz) Ue (V) 4 1 Ie (A) Direct current: DC1 Ue (V) 4 15 Ie (A) 4 1,1 0,4 with 8 poles M1 connector Thermal current (Ith): A Rated insulation voltage (Ui): VAC 6 VDC Protection against short circuits: fuse A 0 V type gg Pollution degree: Alternate current: AC (... Hz) Ue (V) 4 Ie (A) Direct current: DC1 Ue (V) 4 Ie (A) page /5 General Catalog 0-08

4 Position switches FD series Data type approved by IMQ, CCC and EZU Rated insulation voltage (Ui): 0 VAC 0 VAC for contact blocks, 1,,, 4 Thermal current (Ith): A Protection against short circuits: fuse A 0 V type am Protection degree: IP6 MV terminals (screw clamps) Pollution degree Utilization category: AC Operation voltage (Ue): 0 VAC ( Hz) Operation current (Ie): A Forms of the contact element: Za, Zb, Za+Za, Y+Y, X+X, Y+Y+X, Y+Y+Y, Y+X+X Positive opening of contacts on contact block 5, 6,, 9, 11, 1, 1, 14,, 18,, 1,,, 4 In conformity with standards: EN94-1, EN and subsequent modifications and completions, fundamental requirements of the Low Voltage Directive / EEC and subsequent modifications and completions. Data type approved by UL Utilization categories Q0 (69 VA, 15- VDC) A0 ( VA, 1-0 VAC) Data of the housing type 1, 4X (indoor use only), 1, 1 In conformity with standard: UL 8 For all contact blocks except and use or 5 C copper (Cu) conductor and wire size No AWG. Terminal tightening torque of,1 Lb-In. For contact blocks and use or 5 C copper (Cu) conductor and wire size No. 14 AWG. Terminal tightening torque of 1 Lb-In. Please contact our technical service for the list of type approved products. Please contact our technical service for the list of type approved products. Adjustable levers In switches with revolving lever it is possible to adjust the lever with steps for the whole range. The positive movement transmission is always guaranteed thanks to the particular geometrical coupling between the lever and the revolving shaft as prescribed for safety applications by the German standard BG-GS- ET-. Overturning levers It s possible to fasten the lever on switches on straight or reverse side, maintaining the positive coupling. In this way it is possible to obtain two different work plans of the lever. Rotating heads In all switches, it is possible to rotate the head in 90 steps. Working operation of contact block with independent contacts The contact block has two NC contacts, both with positive opening activated independently according to the lever turning direction. Lever turned to left Lever not turned Lever turned to right Contacts diagram Contacts diagram Contacts diagram Unidirectional heads In the switches with revolving lever, it is possible to select the directional operation by removing the four screws of the head and revolving the internal piston (contact block excluded). General Catalog 0-08 page /6

5 Position switches FD series With stainless steel roller on request With stainless steel roller on request Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L LS L L FD 1 FD 1 FD 01 FD 901 FD 01 FD 11 FD 11 FD 11 FD 11 FD 11 FD 1801 FD 01 FD 1 FD 1 FD 1 FD Ø 1NO+ +1NC x() page 6/ - type 4 8 N (5 N ) FD FD FD 0 FD 90 FD 0 FD 1 FD 1 FD 1 FD 1 FD 1 FD 180 FD 0 FD FD FD FD E 6 1NO+ +1NC x() page 6/ - type 6 N (5 N ) page 6/4 - group 18 max. FD 4 FD 4 FD 04 FD 904 FD 04 FD 14 FD 14 FD 14 FD 14 FD 14 FD 1804 FD 04 FD 4 FD 4 FD 4 FD E4 Ø 6x0 1NO NC x() 1 0,5 m/s 0,1 Nm FD 5 FD 5 FD 05 FD 905 FD 05 FD FD FD FD FD FD 1805 FD 05 FD 5 FD 5 FD 5 FD E5 1NO+ +1NC x() page 6/ - type 6 N (5 N ) page 6/4 - group With external rubber gasket With external rubber gasket Ø.5 Ø.5 Ø 11 LO L LS L L FD 8 FD 8 FD 08 FD 908 FD 08 FD 18 FD 18 FD 18 FD 18 FD 18 FD 1808 FD 08 FD 8 FD 8 FD 8 FD E8 1NO+ +1NC x() page 6/ - type 4 8 N (5 N ) FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD 1 FD 14 FD FD 18 FD FD 1 FD FD FD 1NO+ +1NC x() page 6/ - type 4 11 N (5 N ) FD 511 FD 611 FD 11 FD 911 FD 11 FD 1111 FD 111 FD 11 FD 1411 FD 11 FD 1811 FD 11 FD 111 FD 11 FD 11 FD 11 Contact blocks 1NO+ +1NC x() page 6/ - type 4 8 N (5 N ) FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD FD 14 FD FD 18 FD FD 1 FD FD FD 1NO+ +1NC x() page 6/ - type 11 N (5 N ) Accessories See page 5/1 All measures in the drawings are in mm page / Items with code on the green background are available in stock General Catalog 0-08

6 Position switches FD series Ø 8 mm stainless steel sphere Ø 1, mm stainless steel sphere Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L LS L L 11 FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD FD 14 FD FD 18 FD FD 1 FD FD FD 1 1NO+ +1NC x() page 6/ - type 8 N (5 N ) FD 518 FD 618 FD 18 FD 918 FD 18 FD 1118 FD 118 FD 18 FD 1418 FD 18 FD 1818 FD 18 FD 118 FD 18 FD 18 FD 18 1NO+ +1NC x() page 6/ - type 4 8 N (5 N ) FD 519 FD 619 FD 19 FD 919 FD 19 FD 1119 FD 119 FD 19 FD 1419 FD 19 FD 1819 FD 19 FD 119 FD 19 FD 19 FD 19 1NO+ +1NC x() page 6/ - type 4 8 N (5 N ) FD 5 FD FD 1 FD 18 FD FD 1 FD FD FD 1NO+ +1NC x() 1 m/s 0,09 Nm page 6/4 - group Ø 1. Other rollers available. See page /1 Ø mm stainless steel round rod 8 Ø.5 5 Øx LO L LS LI L L FD 51 FD 1 FD 11 FD 181 FD 1 FD 11 FD 1 FD 1 FD 1 1NO+ +1NC x() 1 m/s 0,08 Nm page 6/4 - group FD 55 FD 5 FD FD 185 FD 5 FD 15 FD 5 FD 5 FD 5 1NO+ +1NC x() 1 m/s 0,14 Nm page 6/4 - group FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD 1 FD 14 FD FD FD 18 FD 1NO+ FD 1 FD +1NC FD x() FD 0,1 Nm (0,5 Nm ) FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD 1 FD 14 FD FD FD 18 FD FD 1 FD FD FD 1NO+ +1NC x() 1,5 m/s 0,1 Nm Accessories See page 5/1 Items with code on the green background are available in stock General Catalog 0-08 page /8

7 Position switches FD series x mm square rod Other rollers available. See page /1 Glass fibre rod Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L LS LI L L FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD 1 FD 14 FD FD FD 18 FD FD 1 FD FD FD xx15 1NO+ +1NC 4.5 x() 1,5 m/s 0,1 Nm FD 54 FD 64 FD 4 FD 94 FD 4 FD 114 FD 14 FD 14 FD 144 FD 4 FD 4 FD 184 FD 4 FD 14 FD 4 FD 4 FD 4 Ø. 1NO+ +1NC 54 x() 1 m/s 0,1 Nm FD 55 (1) FD 65 (1) FD 5 (1) FD 95 (1) FD 5 FD 115 (1) FD 15 FD 15 (1) FD 145 (1) FD 5 FD 5 (1) FD 185 (1) FD 5 (1) 1NO+ FD 15 (1) FD 5 (1) +1NC FD 5 x() FD 5 0,1 Nm (0,5 Nm ) Ø6x0 FD 56 FD 66 FD 6 FD 96 FD 6 FD 116 FD 16 FD 16 FD 146 FD 6 FD 6 FD 186 FD 6 1NO+ FD 16 FD 6 +1NC FD 6 x() FD 6 1,5 m/s 0,1 Nm 49 LO L LS LI L L 18.5 Other rollers available. See page /1 Other rollers available. See page /1 Porcelain roller Other rollers available. See page /1 6 FD 551 FD 651 FD 51 FD 951 FD 51 FD 11 FD 151 FD 151 FD 1451 FD 51 FD 1851 FD 51 FD 1 FD 51 FD 51 FD 1 1NO+ +1NC 55.5 x() 0,06 Nm (0,5 Nm ) FD 55 FD 65 FD 5 FD 95 FD 5 FD 1 FD 15 FD 15 FD 145 FD 5 FD 185 FD 5 1NO+ FD FD 5 +1NC FD 5 x() FD E 0,06 Nm (0,5 Nm ) 8.5 Ø 9 5 FD 55-1V9 FD 65-1V9 FD 5-1V9 FD 95-1V9 FD 5-1V9 FD 15-1V9 FD 15-1V9 FD 145-1V9 FD 5-1V9 FD 185-1V9 FD 5-1V9 FD -1V9 FD 5-1V9 FD 5-1 FD E-1V NO+ +1NC x() 0,5 m/s 0,0 Nm (0,5 Nm ) page 6/4 - group FD 556 FD 656 FD 56 FD 956 FD 56 FD 16 FD 156 FD 156 FD 1456 FD 56 FD 56 FD 1856 FD 56 FD 6 FD 56 FD 56 FD E NO+ +1NC x() 0,1 Nm (0,5 Nm ) Accessories See page 5/1 (1) Positive opening only with lever adjusted on the max. See page /11 page /9 Items with code on the green background are available in stock General Catalog 0-08

8 Position switches FD series Other rollers available. See page /1 With stainless steel rollers on request With stainless steel rollers on request Rope switches for signalling Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L LS LI L L FD 55 FD 65 FD 5 FD 95 FD 5 FD 1 FD 15 FD 15 FD 145 FD 5 FD 5 FD 185 FD 5 1NO+ FD FD 5 +1NC FD 5 x() FD E 0,1 Nm (0,5 Nm ) FD 541 Bistable switch with single track lyra lever S S = mechanical snap point positive opening with 1- contact only 0,5 m/s with cam 0,1 Nm FD 54 Bistable switch with double tracks lyra lever S S = mechanical snap point positive opening with 1- contact only 0,5 m/s with cam 0,1 Nm FD 56 FD 66 FD 6 FD 96 FD 6 FD 1 FD 16 FD 16 FD 146 FD 6 FD 186 FD 6 +1NC FD NO FD 6 1NO+ FD 6 x() 0,5 m/s initial N - final N page 6/4 - group 6 LO L LS LI L L Accessories See page 5/1 Items with code on the green background are available in stock General Catalog 0-08 page /

9 Position switches FD series Position switches with revolving lever without actuator Contacts type: R = snap action L = slow action LO = slow action LS = slow action LV = slow action and LI = slow action independent LA = slow action closer = electronic LO L LS LI L L Regular head FD 5 FD 6 FD FD 9 FD FD 11 FD 1 FD 1 FD 14 FD FD FD 18 FD 1NO+ FD 1 FD +1NC FD x() FD 0,1 Nm (0,5 Nm ) Compact head FD 558 FD 658 FD 58 FD 958 FD 58 FD 18 FD 158 FD 158 FD 1458 FD FD 1858 FD 58 1NO+ FD 8 FD 58 +1NC FD 58 x() FD E8 0,06 Nm (0,5 Nm ) 8 FD 5 Bistable switch S S = mechanical snap point positive opening with 1- contact only 0,5 m/s with cam 0,1 Nm IMPORTANT For safety applications: join only switches and actuators marked with symbol. For more information about safety applications see page 6/1. Loose actuators IMPORTANT: These loose actuators can be used with items of series FD, FP, FL, FC only pcs pack Polymer roller Ø mm Adjustable round rod Ø x15 mm Adjustable square rod xx15 mm Flexible rod actuator Adjustable actuator with polymer roller Adjustable glass fibre rod Ø x xx Ø Ø6x VF L VF L VF L VF L4 VF L5 (1) VF L6 Polymer roller Ø mm Polymer roller Ø mm Porcelain roller Adjustable safety actuator with polymer roller Polymer roller Ø mm VF L51 VF L5 VF L5 () VF L56 VF L5 - Only orders for multiple quantities of the packs are accepted. - (1) Actuator VF L5 suits to safety applications only if adjusted to its max length, as you can see in figure beside. If you need an adjustable lever for safety applications, use the adjustable safety lever VF L56. - () The position switch obtained by assembling the switch FD 58 (e.g. FD 558, FD 658) with the actuator VF L5 will not present the same travel diagrams and actuating forces as the position switch FD 5-1V9 (e.g. FD 55-1V9, FD 65-1V9...). - If it is installed with switch FD 58 (e.g. FD 558, FD 658..), the actuator can mechanically interfere with the housing of the switch. The interference could happen or not according to the actuator and the head fixing position. - The actuator cannot be oriented to inside direction because it will mechanically interfere with the switch head. 9 Accessories See page 5/1 Items with code on the green background are available in stock page /11 General Catalog 0-08

10 Position switches FD series Special loose actuators IMPORTANT: These loose actuators can be used with items of series FD, FP, FL, FC only Ø mm stainless steel rollers pcs pack VF L-1 VF L5-1 (1) VF L51-1 VF L5-1 VF L56-1 VF L5-1 Ø 5 mm polymer rollers M VF L- VF L5- (1) VF L51- VF L5- VF L56- VF L5- Ø mm rubber rollers VF L-R5 VF L5-R5 (1) VF L51-R5 VF L5-R5 VF L56-R5 VF L5-R5 Ø mm rubber rollers VF L- VF L5- (1) VF L51- VF L5- VF L56- VF L5- Ø mm overhanging rubber rollers VF L5-4 (1) VF L56-4 General Catalog 0-08 page /1