MultiPort Ball Valves

Transcription

1 Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort Ball Valves Bray High Performance Company

2 MultiPort Ball Valves Ball Valves & ccessories Flow-Tek s fully integrated line of multiport ball valves the Multiport Series offers -way and -way flow control. The Multiport Series valves are available in two different body styles, a compact standard port and a block style full port. Standard port valves are available with NPT Threaded and Quick Clamp end connections. Full port valves are available with NPT Threaded, Quick Clamp, Socket or Butt Weld, and Flanged end connections. End connections can be mixed on a single valve. Many parts are fully interchangeable between models. Cost effective Multiport Series ball valves feature multidirectional control combined with shutoff capacity in one valve. Valve duplication and the need for an extra shutoff valve are eliminated. ll Multiport Series Valves: Tested in accordance with SME B. Vacuum Service to 9 Hg Valve stems are blow-out proof for maximum safety and meet SME B. specifications Valves conform to CE requirements PRESSURE RTINGS MPT0/MPC0 / - / : 000 psi WOG / - : 00 psi WOG MPT0/MPC0/MPS0/MPB0 MPT0/MPC0/MPS0/MPB0 / - : 000 psi WOG / - : 00 psi WOG MPF0 / - : SME Class 0 MPF00 / - : SME Class 00 Body Materials: Stainless Steel and Carbon Steel (Standard) lloy Materials Optional Features & Benefits Stem Seals Multiport Series / valves all feature a live-loaded stem packing assembly for positive stem sealing. Utilizing belleville washers, the stem seal automatically adjusts to compensate for changes in temperature and normal wear. The valves utilize an independent packing gland which can be easily adjusted while the valve is still in service. The / valves also offer primary and secondary stem sealing. The primary seal is a thrust washer and O-ring assembly. The adjustable stem packing creates a secondary seal between the stem and body in the upper stem journal area. Four Seat Design s standard, Multiport Series valves are supplied with an additional fourth seat. This seat acts as a self-contained seal to prevent leakage in the cavity area and mainta proper alignment of the ball. The added seat delivers bidirectional control and shutoff combined in one valve with an OFF position in both T and L port balls. Flow- Tek s seat design ensures bi-directional, bubble-tight sealing with low operating torque. Seat Selection wide range of seat materials are available to meet most applications. The standard seat is TFM. Options include RPTFE, PTFE, UHMWPE and Tek-Fil (carbon/graphite filled TFM). Tek-Fil seats offer reduced torque in high temperature, high cycle, and steam service applications. Interchangeability Many parts including balls, stems, seats, and stem and body seals are interchangeable between different models of the same size valve.

3 Cavity Fillers Optional cavity fillers are available for Multiport models 0/0 and 0/00 valves. Cavity fillers reduce the possibility of media contamination due to line media fluids becoming entrapped in the void between the ball and the valve body wall. Secure Mount The integral cast top flange ensures positive actuator mounting. ctuation equipment can be easily and safely removed while the valve is under full line pressure. The mounting flange is designed to ISO standards with direct flush-mount capabilities. By repositioning the travel stop pin bolt on the mounting flange, all flow patterns are available from the standard valve. Ball/Stem The ball and stem T Port connection is designed L Port to ensure a positive connection. / valve stems are pinned, / stems and balls are one-piece with trunnion mounting. ll stems offer blow-out proof protection. Balls are precision machined and mirror finished for bubble-tight shutoff with less operating torque. Flow-Tek balls have machined edges to reduce seat wear providing a high life cycle. Standard pplications Mixing or blending of line medias Diversion of flow to different locations Bypass of flow around strainers, meters, heat exchangers, etc. Direct flow out of or into storage tanks Shutoff flow from different directions t-port D e F t-port D e F ll T Port Flow Patterns are available from one standard ball and can be rearranged in the field. 0 will require new stop plate. ll T Port Flow Patterns are available from one standard ball and can be rearranged in the field. ll T Port Flow Patterns are available from one standard ball and can be rearranged in the field. H i J G G K l-port a 90 l-port a 90 0 B Off Position Off Position -WY LL-Port: 90 -WY LL-Port: 90 -WY: 90 -WY M N -WY -WY L-Port: 0 M N Optional patterns are Optional patterns are available using T, available L & standard using available T, L & using T, L & standard ball. Please consult factory. ball. Please consult factory. -WY L-Port: 0 Optional patterns are standard ball. Please consult factory. o -WY: 70 P

4 SPECIFICTIONS Model MPT0 Threaded End Connections 7 Valve Models: MPT0/MPC0 Range: / Model MPC0 Quick Clamp Body Material: Stainless Steel Pressure Ratings: / -/ : 000 psi WOG -/ : 00 psi WOG / : 0 psi WSP End Connections: MPT0: Threaded NPT Ends (meet SME B.0. NPT) MPC0: Quick Clamp Ends 7 0 Ports Standard - Way with L and T Ports Testing: ll valve stems and seats are tested to 00 psi gas closure test for bubble tight integrity before shipping. Pressure / Temperature MPT0/MPC0 Series Valves /" /" Valves PTFE RPTFE /" " Valves -0 temperature ( F) Tek-Fil TFM 00 UHMWPE temperature ( F) Components & Materials Models MPT0/MPC0 Item Name Stainless Steel Qty. End Cap STM Gr. CFM Gasket TFM - 00 Body STM Gr. CFM Ball* STM 7 Type Seat* TFM - 00 Stem* SS 7 Thrust Washer* RPTFE O-ring* Viton 9 Stem Packing* PTFE 0 Gland 0 SS Belleville Washer 0 SS Stem Nut 0 SS Lock Saddle 0 SS Space Washer 0 SS Stop Plate 0 SS Handle Nut 0 SS 7 Handle 0 SS Handle Sleeve Vinyl 9 Stop Pin Bolt 0 SS 0 Stop Pin Nut 0 SS Pin Insert 0 SS * These parts are interchangeable with other Multiport models.

5 SPECIFICTIONS Valve Models: Range: / 0 Models - Way 0 Models - Way Model MPT0 Threaded End Connections / shown Quick Clamp 7 Body Material: Stainless Steel, Carbon Steel Pressure Ratings: / : 000 psi WOG -/ : 00 psi WOG / : 0 psi WSP End Connections: MPT0/0: Threaded NPT Ends (meet SME B.0. NPT) MPC0/0: Quick Clamp Ends MPS0/0: Socket Weld Ends MPB0/0: Butt Weld Ends 7 0 Ports Testing: Full -Way & -Way with L, T and LL Ports ll valve stems and seats are tested to 00 psi gas closure test for bubble tight integrity before shipping. Socket Weld Butt Weld Pressure / Temperature MPT0/MPC0/MPS0/MPB0 MPT0/MPC0/MPS0/MPB /" " Valves -0 PTFE RPTFE /" " Valves temperature ( F) Tek-Fil TFM 00 UHMWPE temperature ( F) Components & Materials Item Name Stainless Steel Carbon Steel Qty. End Cap STM Gr. CFM STM Gr. WCB Gasket** TFM - 00 TFM - 00 Body STM Gr. CFM STM Gr. WCB Ball* STM Gr. CFM STM Gr. CFM Seat* TFM - 00 TFM - 00 Stem* SS SS 7 Thrust Washer* RPTFE RPTFE O-ring* Viton Viton 9 Stem Packing* PTFE PTFE 0 Gland 0 SS 0 SS Belleville Washer 0 SS 0 SS Stem Nut 0 SS 0 SS Lock Saddle 0 SS 0 SS Space Washer 0 SS 0 SS Stop Plate 0 SS 0 SS Handle Nut 0 SS 0 SS 7 Handle 0 SS 0 SS Handle Sleeve Vinyl Vinyl 9 Stop Pin Bolt 0 SS 0 SS 0 Stop Pin Nut 0 SS 0 SS Pin Insert 0 SS 0 SS Bolt (* - ) STM 9 Gr. B STM 9 Gr. B Threaded Stud + STM 9 Gr. B STM 9 Gr. B7 Hex Nut + STM 9 Gr. B STM 9 Gr. H *These parts are interchangeable with other Multiport models. **These parts are interchangable with MPF0/00 models. + ( / and up)

6 Model MPF0 SME Class 0 Model MPF00 SME Class 00 SPECIFICTIONS Valve Models: MPF0/MPF00 Model MPF0 Flanged End Connections / shown a Range: Body Material: MPF0: / MPF00: / Stainless Steel, Carbon Steel Pressure Ratings: SME 0: SS 7 / WCB psi SME 00: SS 70/WCB 70 psi End Connections: Flanged Ends per SME B Ports Full -Way & -Way with L, T & LL Ports Testing: ll valve stems and seats are tested to 00 psi gas closure test for bubble tight integrity before shipping Pressure / Temperature MPF0/MPF00 Series Valves Class 0 Valves PTFE RPTFE Class 00 Valves -0 temperature ( F) Tek-Fil TFM 00 UHMWPE Components & Materials Item Name Stainless Steel Carbon Steel Qty. End Cap STM Gr. CFM STM Gr. WCB Body STM Gr. CFM STM Gr. WCB Ball & Stem** STM Gr. CFM STM Gr. CFM Stem Bushing** 0% PTFE/0% SS 0% PTFE/0% SS Seat* TFM - 00 TFM - 00 Gasket** TFM - 00 TFM O-ring* Viton Viton Stem Packing* TFM - 00 TFM Gland 0 SS 0 SS 0 Belleville Washer 0 SS 0 SS Packing Nut 0 SS 0 SS Handle T-Bar STM Gr. CFM STM Gr. CFM Stop Pin Bolt 0 SS 0 SS a Stop Pin Nut 0 SS 0 SS Handle Bolt 0 SS 0 SS Handle Carbon Steel Carbon Steel Blank Cover STM Gr. CFM STM Gr. WCB 7 Bolt (½ - ) STM 9 Gr. B STM 9 Gr. B / Threaded Stud + STM 9 Gr. B STM 9 Gr. B7 / Bonnet STM Gr. CFM STM Gr. WCB 9 Hex Nut + STM 9 Gr STM 9 Gr. H / 0 Bonnet Gasket PTFE PTFE *These parts are interchangeable with other Multiport models. **These parts are interchangeable with / MPT0/0 models. + ( / and up)

7 SPECIFICTIONS 7 Valve Models: MPF0 Range: 0 - MPF0 Flanged End Connections 0 shown Body Material: Pressure Ratings: Stainless Steel, Carbon Steel SME 0: SS 7 / WCB psi (STD. PORT) End Connections: Flanged Ends per SME B. Ports Testing: Standard - Way with L and T Ports ll valve stems and seats are tested to 00 psi gas closure test for bubble tight integrity before shipping Pressure / Temperature MPF Class 0 Valves PTFE RPTFE Class 00 Valves temperature ( F) Tek-Fil TFM 00 UHMWPE Components & Materials Item Name Stainless Steel Carbon Steel Qty. Body STM Gr. CFM STM Gr. WCB End Cap STM Gr. CFM STM Gr. WCB Trunion Ball SS SS Bushing TFM 00 TFM 00 Top Cap Stud & Nut 9 Gr. B 9 Gr. 9 Gr. B7 9 Gr. H * + Handle T-Bar STM -- STM -- 7 Lever Carbon Steel Carbon Steel Seat TFM 00 TFM 00 9 Gland STM Gr. CF STM Gr. WCB 0 Stem Packing TFM 00 TFM 00 Top Cap Gasket TFM 00 TFM 00 Joint Gasket TFM 00 TFM 00 O-Ring Viton Viton Stopper 0 SS 0 SS Lock Saddle 0 SS 0 SS Gland Bolt STM 9 Gr. B STM 9 Gr. B7 7 Blank End Cap STM Gr. CFM STM Gr. WCB End Cap Stud & Nut 9 Gr. B 9 Gr. B7 + 9 Gr. 9 Gr. H 0 9 Top End Cap STM Gr. CFM STM Gr. WCB * Valve s - + Valve s - - Valve s - 0-7

8 DIMENSIONS - Models MPT0/MPC0 () 0 00 øb C C D E F G H H H H øi øj K L M Torque lbs-in / / / / / / Torque at maximum rated pressure, clean water, TFM seating material. Nm Cv Model MPT0 / 0 / / 0 ½ Weight Models MPF0 (-Way, T Port) / 0 / / 0 ½ 0 0 lbs Kg Cv Model MPC0 / 0 / / 0 ½ Weight Models MPF00 (-Way, T Port) / 0 / / 0 ½ 0 0 lbs Kg MPT0 L I MPC0 C J M C K D G E F øb H H H H

9 Dimensions DIMENSIONS - Models MPT/MPC/MPS/MPB - Classes 0/0 () * 0 00 øb C* C D E F G H H H H øi øj K L M Torque lbs-in / /T /C /T /C /T / / / Torque at maximum rated pressure, clean water, TFM seating material. Nm Cv Models MPT/MPS/MPB 0 & 0 / 0 / / 0 ½ 0 0 ½ Cv Models MPC 0 & 0 / 0 / / 0 ½ 0 0 ½ Weight Models MPT/MPS/MPB 0 (L Port) / 0 / / 0 ½ 0 0 ½ 0 00 lbs Kg Weight Model MPC0 (L Port) / 0 / / 0 ½ 0 0 ½ 0 00 lbs Kg MPC0 / shown MPT/MPS/MPB 0* / shown K L I C C J M D G E H H H H For detailed drawing information on other valve sizes not shown, consult the factory for Multiport IOM manual. F øb 9

10 DIMENSIONS - MODEL MPF - Classes 0/00 () 0 00 øb D E F G øh øl* J K L* MPF0 Flange Dimensions MPF00 Flange Dimensions M N S T M N S T / / / / / M M *Outer mounting bolt circle (I) and hole diameter (L) for / valves not shown in drawing. Torque Models MPF0/MPF00 ½ ¾ 0 ½ 0 0 ½ Lbs-In Nm J MPF0/MPF00 -/ shown K H Torque at maximum rated pressure, clean water, TFM seating material. Cv Models MPF0/MPF00 ½ ¾ 0 ½ 0 0 ½ / Weight Models MPF0 (-Way, T Port) D ½ ¾ 0 ½ 0 0 ½ lbs Kg G E Weight Models MPF00 (-Way, T Port) F ½ ¾ 0 ½ 0 0 ½ øb S M lbs Kg N øt 0

11 DIMENSIONS - MODEL MPF - Class 0 () ød ød ød ød øc øf B B E H øs M N S T M M Torque MODEL MPF - Class Lbs-In 9 9 Nm 0 0 Weight MODEL MPF - Class lbs Kg 7 Torque at maximum rated pressure, clean water, TFM seating material. Cv MODEL MPF - Class MPF0 0 shown E S øc B B H ø ød ød ød ød ød L/ (STD. PORT) øf ømxn T. E L

12 FLOW-TEK - US - Office & Manufacturing Global manufacturing, service around the corner To serve you locally, each region mainta a factory certified sales and service network for all Bray International products. WORLD HEDQURTERS - Bray International, INC. - US ll statements, technical information, and recoendations in this bulletin are for general use only. Consult Flow-Tek representatives or factory for the specific requirements and material selection for your intended application. The right to change or modify product design or product without prior notice is reserved. Flow-Tek is a registered trademark of Flow-Tek, Inc. 0 Flow-Tek, Inc. ll rights reserved. F-00_EN_MPV_0-0 Subsidiary of BRY INTERNTIONL, Inc. N. Eldridge Pkwy #00 Houston, Texas Fax:.9.0