Fujitsu LifeBook C Series

Transcription

1 Fujitsu LifeBook C Series BIOS Guide LifeBook C Series Model: C-6611 C-6631 C-7631 Documet Date: 10/29/01 Documet Part Number: FPC FUJITSU PC CORPORATION

2 LifeBook C Series BIOS C Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operatig eviromet for your otebook. Your BIOS is set at the factory for ormal operatig coditios, therefore there is o eed to set or chage the BIOS eviromet to operate your otebook. The BIOS Setup Utility cofigures: Device cotrol feature parameters, such as chagig I/O addresses ad boot devices. System Data Security feature parameters, such as passwords. Eterig the BIOS Setup Utility To eter the BIOS Setup Utility do the followig: 1. Tur o or restart your otebook. 2. Press the [F2] key oce the Fujitsu logo appears o the scree. This will ope the mai meu of the BIOS Setup Utility with the curret settigs displayed. 3. Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup meus to review or alter the curret settigs. Navigatig Through The Setup Utility The BIOS setup utility cosists of seve meus: Mai, Advaced, Security, Power, Boot, Ifo, ad Exit. This documet explais each meu i tur, icludig all submeus ad setup items. The followig procedures allow you to avigate the setup utility meus: 1. To select a meu, use the cursor keys: 2. To select a field withi a meu or a submeu, use the cursor keys: 3. To select the differet values for each field, press the [Spacebar] or [+] to chage to the ext higher selectio ad [F5] or [-] to go to the ext lower selectio. 4. To activate a submeu press the [Eter] key. 5. To retur to a meu from a submeu, press the [Esc] key. 6. To go to the Exit meu from ay other meu, press the [Esc] key. POINTS Selectig a field causes a help message about that field to be displayed o the right-had side of the scree. Pressig the Eter key with the highlight o a selectio that is ot a submeu or auto selectio will cause a list of all optios for that item to be displayed. Pressig the Eter key agai will select the highlighted choice. 7. Pressig the [F9] key resets all items i the BIOS to the default values. 8. Pressig the [F10] key saves the curret cofiguratio ad exits the BIOS Setup Utility. You will be asked to verify this selectio before it is executed. 9. Pressig the [F1] key gives you a geeral help scree. Eterig the Setup Utility After a Cofiguratio Chage or System Failure If there has bee a chage i the system cofiguratio that does ot match the parameter settigs stored i your BIOS memory, or there is a failure i the system, the system beeps ad/or displays a error message after the Power O Self Test (POST). If the failure is ot too severe, it will give you the opportuity to modify the settigs of the setup utility, as described i the followig steps: 1. Whe you tur o or restart the computer there is a beep ad/or the followig message appears o the scree: Error message - please ru SETUP program Press <F1> key to cotiue, <F2> to ru SETUP 2. If a error message is displayed o the scree, ad you wat to cotiue with the boot process ad start the operatig system ayway, press the [F1] key. POINTS If your otebook emits a series of beeps that souds like a code ad the display is blak, please refer to the Troubleshootig Sectio. The Troubleshootig Sectio icludes a list of error messages ad their meaigs. If your data security settigs require it, you may be asked for a password before the operatig system will be loaded. 2

3 C Series BIOS 3. If a error message is displayed o the scree, ad you wat to eter the setup utility, press the [F2] key. 4. Whe the setup utility starts with a fault preset, the system displays the followig message: Warig! Error message [Cotiue] 5. Press ay key to eter the setup utility. The system will the display the Mai Meu with curret parameters values. 3

4 LifeBook C Series BIOS MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Mai Meu allows you to set or view the curret system parameters. Follow the istructios for Navigatig Through The Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig tables show the ames of the meu fields for the Mai meu ad its submeus, all of the optios for each field, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. POINT System Time ad System Date ca also be set from your operatig system without usig the setup utility. Use the caledar ad time ico o your Widows Cotrol pael or type time or date from the MS-DOS prompt. PhoeixBIOS Setup Utility Mai Advaced Security Power Boot Ifo Exit System Time: [02:34:56] System Date: [10/16/2001] Floppy Disk A: [1.44/1.2 MB, 3.5"] Primary Master Primary Slave [TOSHIBA MK2018GAP-(PM)] [HL-DT-ST CD-RW/DVD DRIVE-(PS)] Adjust caledar clock. <Tab>, <Shift-Tab>, or <Eter> selects field. Laguage: [Eglish (US)] Select Meu Chage Values Eter Select Sub-Meu F9 F10 Setup Defaults Save ad Exit Figure 1. Mai Meu Table 1: Fields, Optios ad Defaults for the Mai Meu Note that the parameters listed below may differ, as determied by your system cofiguratio. Meu Field Optios Default Descriptio System Time: Sets ad displays the curret time. Time is i a 24 hour format of hours:miutes:secods with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You may chage each segmet of the time separately. Move betwee the segmets with the [Tab] key ad/or [Shift] + [Tab] keys. System Date: Sets ad displays the curret date. Date is i a moth/day/year umeric format with 2 digits each for moth ad day ad 4 digits for year. (MM/DD/YYYY) for example: 10/16/2001. You may chage each segmet of the date separately. Move betwee the segmets with the [Tab] key ad/or [Shift] + [Tab] keys. 4

5 Mai Meu Table 1: Fields, Optios ad Defaults for the Mai Meu Note that the parameters listed below may differ, as determied by your system cofiguratio. Meu Field Optios Default Descriptio Floppy Disk A: [1.44/1.2 MB 3.5"] [1.44/1.2 MB 3.5"] Eables or disables a floppy disk drive. Primary Master: Selects Primary Master submeu The product # of the Hard Drive Display the type of device o this ATA/ATAPI iterface, if there is oe. Pressig the Eter key selects the Primary Master submeu allowig additioal device cofiguratio optios for this iterface. Primary Slave: Selects Secodary Master submeu The product umber of the CD-ROM Display the type of device o this ATA/ATAPI iterface, if there is oe. Pressig the Eter key selects the Secodary Master submeu allowig additioal device cofiguratio optios for this iterface Laguage: Eglish (US) Japaese (JP) [Eglish (US)] The default settig differs betwee the US/Europea ad the Japaese model. Selects the display laguage for the BIOS. 5

6 LifeBook C Series BIOS Primary Master Submeu of the Mai Meu The Primary Master submeu idetifies what ATA devices are istalled. *Note that actual hard drive label show may vary. Depedig o the drive type, iformatio such as cyliders, heads ad sectors may also be displayed. Mai PhoeixBIOS Setup Utility Primary Master [TOSHIBA MK2018GAP -(PM)] Type: Maximum Capacity: [Auto] 20004MB Select ATA/ATAPI drive istalled here. Multi-Sector Trasfers: [16 Sectors] LBA Mode Cotrol: [Eabled] PIO Trasfer Mode: [Fast PIO 4] DMA Trasfer Mode: [Ultra DMA 2] [Auto] The BIOS auto-types the drive o boot time. Except [Auto] You eter parameters of the drive. [Noe] The drive is disabled. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 2. Primary Master Submeu Table 2: Fields, Optios ad Defaults for the Primary Master Submeu of the Mai Meu Meu Field Optios Default Descriptio Type: Auto Noe CD-ROM Hard Disk [Auto] Selects the ATA/ATAPI device type. Select Auto to have the type automatically idetified by the BIOS at POST. If Noe is selected, all of the followig Set-up items do ot appear. Select CD-ROM if a CD-ROM drive is istalled at this coectio. If Hard Disk is selected, you must specify the umber of Cyliders, Heads, ad Sectors for the drive. Cyliders: A umber betwee 0 ad 65,535 Heads: A umber betwee 1 ad 16 Sectors: A umber betwee 0 ad 63 This item appears oly whe Hard Disk is selected. Whe Hard Disk is selected, you ca chage the value. This field is chaged by icremetig (pressig the [Spacebar]) or by typig i the umber. This item appears oly whe Hard Disk is selected. Whe Hard Disk is selected, you ca chage the value. This field is chaged by icremetig (pressig the [Spacebar]) or by typig i the umber. This item appears oly whe Hard Disk is selected. Whe Hard Disk is selected, you ca chage the value. This field is chaged by icremetig (pressig the [Spacebar]) or by typig i the umber. 6

7 Mai Meu Table 2: Fields, Optios ad Defaults for the Primary Master Submeu of the Mai Meu Meu Field Optios Default Descriptio Maximum Capacity: Display oly Displays the maximum capacity of the drive calculated from the parameters of the hard disk whe Hard Disk is selected. Multi-Sector Trasfers: 2 Sectors 4 Sectors 8 Sectors 16 Sectors 32 Sectors 64 Sectors 128 Sectors [16 Sectors] This optio caot be chaged whe Auto is selected. Specify the umber of sectors per block for multiple sector trasfer. MAX refers to the size the disk returs whe required. LBA Mode Cotrol: Eabled [Eabled] Eables or disables logical Block Addressig i place of Cylider, Head, Sector addressig. This optio caot be chaged whe Auto is selected. PIO Trasfer Mode: Stadard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 [Fast PI0 4] Selects the method for movig data to/from the drive. Autotype the drive to select the optimum trasfer mode. This optio caot be chaged whe Auto is selected. Multi-word DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, ad set to mode 2 for Fast PIO 4 / DMA. DMA Trasfer Mode: Multiword DMA 1 Multiword DMA 2 Ultra DMA 0 Ultra DMA 1 [Ultra DMA 2] Selects the method for movig data to/from the drive. Autotype the drive to select the optimum trasfer mode. This optio caot be chaged whe Auto is selected. Ultra DMA 2 CAUTION A bootable CD-ROM may have either a floppy disk format or a hard drive format. Whe the bootable CD- ROM is used, the drive allocatios chage automatically without chagig the BIOS setup. If a floppy disk format CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will oly take Drive C: (hard drive format) if the iteral hard drive is ot preset or is disabled. The bootable CD-ROM ca ever use a C: desigatio if a formatted iteral hard drive is preset, sice the C: desigator is always reserved for the iteral hard drive.the boot sequece igores the ew drive desigatios; however, your applicatio software will use the ew desigatios. CAUTION Be careful of the operatig eviromet whe bootig from a CD-ROM or you may overwrite files by mistake. 7

8 LifeBook C Series BIOS Primary Slave Submeu of the Mai Meu The Primary Slave submeu is for the iteral CD-ROM drive. The drive type is displayed o this meu as well as the Mai meu. Your otebook auto-seses the characteristics of the iteral CD-ROM Drive istalled. You will ot eed to modify these settigs, they are displayed for your referece. Note that actual drive labels show may vary. Mai PhoeixBIOS Setup Utility Primary Slave [HL-DT-ST CD-RW/DVD DRIVE -(PS)] Type: Multi-Sector Trasfers: LBA Mode Cotrol: PIO Trasfer Mode: DMA Trasfer Mode: [Auto] [Stadard] Select ATA/ATAPI drive istalled here. [Auto] The BIOS auto-types the drive o boot time. Except [Auto] You eter parameters of the drive. [Noe] The drive is disabled. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 3. Primary Slave Submeu Table 3: Fields, Optios ad Defaults for the Primary Slave Submeu of the Mai Meu Meu Field Optios Default Descriptio Type: Auto Noe CD-ROM Hard Disk [Auto] Selects the ATA/ATAPI device type. Select Auto to have the type automatically idetified by the BIOS at POST. If Noe is selected, all of the followig Set-up items do ot appear. Select CD-ROM or Hard Disk for appropriate drive type istalled at this coectio. Multi-Sector Trasfers: 2 Sectors 4 Sectors 8 Sectors 16 Sectors 32 Sectors 64 Sectors 128 Sectors This optio caot be chaged whe Auto is selected. Specify the umber of sectors per block for multiple sector trasfer. LBA Mode Cotrol: Eabled Eables or disables Logical Block Addressig i place of Cylider, Head, Sector addressig. This optio caot be chaged whe Auto is selected. 8

9 Mai Meu Table 3: Fields, Optios ad Defaults for the Primary Slave Submeu of the Mai Meu Meu Field Optios Default Descriptio PIO Trasfer Mode: Stadard Fast PIO 1 Fast PIO 2 Fast PIO 3 Fast PIO 4 [Stadard] Selects the method for movig data to/from the drive. Autotype the drive to select the optimum trasfer mode. This optio caot be chaged whe Auto is selected. Multi-word DMA is automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, ad set to mode 2 for Fast PIO 4/DMA. DMA Trasfer Mode: Multiword DMA 1 Multiword DMA 2 Ultra DMA 0 Ultra DMA 1 Selects the method for movig data to/from the drive. Autotype the drive to select the optimum trasfer mode. This optio caot be chaged whe Auto is selected. Ultra DMA 2 Exitig from Mai Meu Whe you have fiished settig the parameters o this meu, you ca either exit from the setup utility, or move to aother meu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit meu. If you wish to move to aother meu, use the cursor keys. 9

10 LifeBook C Series BIOS ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advaced Meu allows you to: Eable or disable support for Plug & Play operatig systems. Set the I/O addresses for the serial ad parallel ports. Set the commuicatio mode for the parallel ad ifrared ports. Set the features of the keyboard/mouse. Select betwee the display pael ad a exteral CRT display. Eable or disable compesatio for your display. Cofigure PCI devices i your system. Cofigure CPU features. Cofigure USB features. Cofigure DMI Evet Loggig. Follow the istructios for Navigatig Through the Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig tables show the ames of the meu fields for the Advaced Meu ad its submeus, all of the optios for each field, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. Note that ot all fields appear i all cofiguratios; the fields that appear are depedet upo the system CPU. PhoeixBIOS Setup Utility Mai Advaced Security Power Boot Ifo Exit Plug & Play O/S: [No] Protected Device Cofiguratios: [No] Serial/Parallel Port Cofiguratios Keyboard/Mouse Features Video Features Iteral Device Cofiguratios PCI Cofiguratio CPU Features USB Features [No] The BIOS cofigures also o-boot devices. Select if you are usig a o-plug & Play OS or a o-acpi OS. [Yes] The BIOS cofigures oly boot devices. Evet Loggig Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 4. Advaced Meu 10

11 Advaced Meu Table 4: Fields, Optios ad Defaults for the Advaced Meu Meu Field Optios Default Descriptio Plug & Play O/S: No Yes [No] Select Yes if you are usig a Plug & Play capable operatig system. Select No if you eed the BIOS to cofigure o-boot devices. Protected Device Cofiguratios: No Yes [No] No: allows Plug & Play operatig system to chage device system settigs. Yes: prevets a Plug & Play operatig system from chagig system settigs. Serial/Parallel Port Cofiguratios Keyboard/Mouse Features Whe selected, opes the Serial/Parallel Port Cofiguratios submeu which allows the user to modify settigs for serial, ifrared ad parallel ports. Whe selected, opes the Keyboard/Mouse Features submeu, which allows settig exteral ad iteral keyboard ad mouse parameters. Video Features Whe selected, opes the Video Features submeu, which allows settig of the display parameters, icludig routig of video sigals to differet displays. Iteral Device Cofiguratios Whe selected, opes the Iteral Device Cofiguratio submeu, which allows eablig or disablig the Floppy Disk ad IDE Cotrollers. PCI Cofiguratios Whe selected, opes additioal meus to cofigure PCI devices. CPU Features Whe selected, opes the CPU Features submeu, which allows eablig or disablig of the processor serial umber feature. USB Features Whe selected, opes the USB Features submeu, which allows eablig or disablig of Legacy Floppy Emulatio. Evet Loggig Whe selected, opes the evet loggig submeu. 11

12 LifeBook C Series BIOS Serial/Parallel Port Cofiguratio Submeu of the Advaced Meu The Serial/Parallel Port Cofiguratio submeu provides the ability to set the I/O addresses ad iterrupt levels for the serial, ifrared, ad parallel ports of your otebook. CAUTION I/O addresses, DMA chaels, ad Iterrupt levels ca be etered i various ways, icludig via the BIOS setup utility, the cotrol software for the I/O device, or the hardware. If ay two ports or devices, serial or parallel, have the same I/O address assiged, your otebook will ot fuctio ormally. Please keep a record of origial settigs before makig ay chages i the evet that a restoratio is required. See your hardware ad software documetatio as well as the setup utility to determie settigs, limitatios, etc. POINTS To prevet IRQ ad address coflicts, avoid chagig the default settigs. If you must chage the settigs, you ca call FUJITSU for techical assistace. The BIOS will war you of a resource coflict by placig a yellow asterisk ext to each device that is i coflict. All I/O addresses i Table 5 are i hexadecimal. Advaced PhoeixBIOS Setup Utility Serial/Parallel Port Cofiguratios Ifrared Port: [Eabled] Mode: [FIR] I/O Address: [2E8-2EF] Iterrupt: [IRQ 3] I/O Address: [118-11F] DMA Chael: [DMA 3] Parallel Port: [Eabled] Mode: [Bi-directioal] I/O Address: [378-37F] Iterrupt: [IRQ 7] The port is disabled. [Eabled] The port is eabled with user cofiguratio. [Auto] The port is cofigured depedig o 'Plug & Play OS' settig. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 5. Serial/Parallel Port Cofiguratio Submeu 12

13 Advaced Meu Table 5: Fields, Optios ad Defaults for the Port Cofiguratio Submeu of the Advaced Meu Meu Field Optios Default Descriptio Ifrared Port: Eabled Auto Mode: IrDA FIR [Eabled] [FIR] Cofigures the ifrared port usig either o cofiguratio (), a user defied cofiguratio (Eabled), or by allowig the BIOS or OS to choose the cofiguratio (Auto). Whe the ifrared port is eabled this optio is available allowig the user to set the mode for the ifrared port. I/O Address: 3F8-3FF 2F8-2FF 3E8-3EF 2E8-2EF [2E8-2EF] Allows user to set the ifrared port I/O address whe the ifrared port is Eabled. Iterrupt: IRQ 3 IRQ 4 IRQ 5 [IRQ 3] Allows user to set the ifrared port iterrupt whe the ifrared port is Eabled. I/O address: F F [118-11F] Allows user to set the ifrared port I/O address whe the ifrared port is Eabled. DMA Chael: DMA 1 DMA 3 [DMA 3] Allows user to set the ifrared port DMA Chael whe the ifrared port is Eabled. Parallel Port: Eabled Auto Mode: Output Oly Bi-directioal ECP [Eabled] [Bi-directioal] Cofigures the parallel port usig either o cofiguratio (), a user defied cofiguratio (Eabled), or by allowig the BIOS or OS to choose the cofiguratio (Auto). Whe the parallel port is eabled this optio is available allowig the user to set the mode for the parallel port. Bi-directioal allows two-way trasfer of iformatio betwee your otebook ad a coected parallel device. Output Oly (Half Duplex) allows iformatio to be trasferred i oly oe directio, from your otebook to the priter or similar device. ECP Mode allows commuicatio with the ECP class of parallel I/O devices. I/O address: F F 3BC - 3BF [378-37F] Allows user to set the parallel port base I/O address whe the parallel port is Eabled. Iterrupt: IRQ 5 IRQ 7 [IRQ 7] Allows user to set the parallel port iterrupt whe the parallel port is Eabled. 13

14 LifeBook C Series BIOS Keyboard/Mouse Features Submeu of the Advaced Meu The Keyboard/Mouse Features submeu is for settig the parameters of the itegrated ad exteral mouse ad keyboard. PhoeixBIOS Setup Utility Advaced Security Power Savigs Exit Keyboard/Mouse Features Numlock: Iteral Poitig Device: [Off] [Maual Settig] Select power-o state for Numlock. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 6. Keyboard/Mouse Features Submeu Table 6: Fields, Optios ad Defaults for the Keyboard/Mouse Submeu of the Advaced Meu Meu Field Optios Default Descriptio Numlock: O Off [Off] Sets the NumLock fuctio state whe the computer completes bootig. Iteral Poitig Device: Maual Settig Always Eabled Always [Maual Settig] Sets the device cotrollig the mouse cursor o the scree. Auto disables the iteral poitig device whe a exteral poitig device is coected to the PS/2 port. Maual Settig allows the device to be eabled or disabled by a Hot Key. Always Eabled makes the poitig device always eabled whether there is a exteral mouse or ot. Always makes the poitig device always disabled whether there is a exteral mouse or ot. 14

15 Advaced Meu Video Features Submeu of the Advaced Meu The Video Features Submeu is for settig the display parameters. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit Video Features Display: Compesatio: TV Output: TV Stadard: [Iteral Flat Pael] [NTSC] Select display termial. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 7. Video Features Submeu Table 7: Fields, Optios ad Defaults for the Video Features Submeu of the Advaced Meu Meu Field Optios Default Descriptio Display: Iteral Flat Pael Exteral Simultaeous Compesatio: Eabled TV Output: Eabled TV Stadard: NTSC PAL [Iteral Flat Pael] [NTSC] Selects where the video sigal will be routed. Eables or disables compesatio which cotrols spacig o the display. Whe eabled, displays with less tha pixel resolutio 1024 x 768 will still cover the etire scree. Allows you to eable or disable TV output. Allows you to select a TV stadard. 15

16 LifeBook C Series BIOS Iteral Device Cofiguratio Submeu of the Advaced Meu The Iteral Device Cofiguratio submeu allows the user to cofigure other iteral devices. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit Iteral Device Cofiguratios Floppy Disk Cotroller: [Eabled] IDE Cotroller: [Eabled] Floppy disk drive is disabled. [Eabled] Floppy disk drive is eabled. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 8. Iteral Device Cofiguratio Submeu Table 8: Fields, Optios ad Defaults for the Iteral Device Cofiguratio Submeu of the Advaced Meu Meu Field Optios Default Descriptio Floppy Disk Cotroller: Eabled [Eabled] Eables or disables the Floppy Disk Drive. IDE Cotroller: Eabled [Eabled] Eables or disables IDE cotroller. 16

17 Advaced Meu PCI Cofiguratio Submeu of the Advaced Meu The PCI Cofiguratio submeu allows the user to reserve specific iterrupts (IRQs) for legacy ISA devices, ad to eable or disable built i PCI device modules. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit IRQ Reservatio PCI Cofiguratio Reserve specific IRQs for use by legacy ISA devices. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 9. PCI Cofiguratio Submeu Table 9: Fields, Optios ad Defaults for the PCI Cofiguratio Submeu of the Advaced Meu Meu Field Optios Default Descriptio IRQ Reservatio Reserve specific IRQs for use by legacy ISA devices. 17

18 LifeBook C Series BIOS IRQ Reservatio Submeu of the PCI Cofiguratio Submeu The IRQ Reservatio submeu allows the user to mark various IRQs as reserved for use by legacy ISA devices. Whe a IRQ is reserved, the BIOS does ot use it for embedded PCI or ISA devices. CAUTION Oly IRQ s 9, 10, & 11 ca be reserved without coflict. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit IRQ Reservatio IRQ 3: IRQ 4: IRQ 5: IRQ 7: IRQ 9: IRQ 10: IRQ 11: IRQ 15: [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] Reserve the specified IRQ for use by legacy ISA devices. F1 Help Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 10. IRQ Reservatio Submeu Table 10: Fields, Optios ad Defaults for the IRQ Reservatio Submeu of the PCI Cofiguratio Submeu of the Advaced Meu Meu Field Optios Default Descriptio IRQ 3: Available Reserved [Available] Reserves IRQ 3. If Reserved is selected, the BIOS reserves IRQ 3 for use by legacy ISA devices ad does ot use it for embedded PCI or ISA devices. IRQ 3 is removed from the IRQ bitmap i the PCI IRQ routig table. IRQ 4: Available Reserved IRQ 5: Available Reserved IRQ 7: Available Reserved [Available] Reserves IRQ 4. [Available] Reserves IRQ 5. [Available] Reserves IRQ 7. 18

19 Advaced Meu Table 10: Fields, Optios ad Defaults for the IRQ Reservatio Submeu of the PCI Cofiguratio Submeu of the Advaced Meu Meu Field Optios Default Descriptio IRQ 9: Available Reserved IRQ 10: Available Reserved IRQ 11: Available Reserved IRQ 15: Available Reserved [Available] Reserves IRQ 9. [Available] Reserves IRQ 10. [Available] Reserves IRQ 11. [Available] Reserves IRQ

20 LifeBook C Series BIOS CPU Features Submeu of the Advaced Meu The CPU Features Submeu cofigures the system processor. Note that this submeu oly appears i certai cofiguratios, based upo the system CPU. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit CPU Features Processor Serial Number: Itel(R) SpeedStep(TM) Techology: [Auto] Cofigures Processor Serial Number feature of Petium(R) III processor. Processor Serial Number feature is disabled. [Eabled] Processor Serial Number feature is eabled. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 11. CPU Features Submeu Meu Field Optios Default Descriptio Processor Serial Number Eabled Cofigures Processor Serial Number feature of Petium (R) III processor. Itel(R) SpeedStep(TM) Techology: Auto Max. Perf. Batt. Opt. [Auto] Whe Auto is selected, the CPU speed is determied by the power source used. Whe Max. Perf. is selected, CPU speed is maximized. Whe Batt. Opt. is selected, CPU speed is optimized for battery operatio. Whe is selected, CPU speed is fixed to battery optimized speed. 20

21 Advaced Meu USB Features Submeu of the Advaced Meu The USB Features Submeu cofigures the system for use with a USB floppy drive. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit USB Features USB Floppy Disk: Legacy Floppy Emulatio is disabled. [Eabled] Legacy Floppy Emulatio is eabled, ad USB floppy is available without a USB-aware OS. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 12. USB Features Submeu Table 12: Fields, Optios ad Defaults for the USB Features Submeu of the Advaced Meu Meu Field Optios Default Descriptio USB Floppy Disk: Eabled Whe Eabled is selected, Legacy Floppy Emulatio is eabled ad the USB floppy drive ad bootable support are available without a USB-aware OS. Whe is selected, Legacy Floppy Emulatio is disabled. 21

22 LifeBook C Series BIOS Evet Loggig Submeu of the Advaced Meu The Evet Loggig Submeu cofigures evet loggig features for DMI evets. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit Evet Loggig Evet Log Capacity: Space Available Evet Log Validity: Valid View Evet Log: [Eter] Press <Eter> key to view the cotets of the evet log. Evet Loggig: [Eabled] System Boot Evet: Clear All Evet Logs: [No] Mark Evets as Read: [Eter] Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 13. Evet Loggig Submeu Table 13: Fields, Optios ad Defaults for the Evet Loggig Submeu of the Advaced Meu Meu Field Optios Default Descriptio Evet Log Capacity: Space Available Display oly Evet Log Validity: Valid Display oly View Evet Log: Eter [Eter] Allows you to view cotet of evet log Evet Loggig: Eabled [Eabled] Turs evet loggig o ad off for all DMI evets. System Boot Evet: Eabled Turs evet loggig o ad off for DMI system boot evets. Clear All Evet Logs: No Yes [No] Whe set to [Yes] all evet logs will be cleared at ext boot. Mark Evets as Read: Eter [Eter] Allows you to make all evets curretly i the evet log as havig bee read. 22

23 Advaced Meu SECURITY MENU SETTING THE SECURITY FEATURES The Security meu allows you to set up the data security features of your otebook to fit your operatig eeds ad to view the curret data security cofiguratio. Follow the istructios for Navigatig Through the Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig tables show the ames of the meu fields for the Security meu ad its submeus, all of the optios for each field, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. The default coditio is o passwords required ad o write protectio. POINTS If you make a error whe re-eterig the password a [Warig] will be displayed o the scree. To try agai press the Eter key ad the retype the password. Press the Esc key to abort the password settig process. If Password O Resume is Eabled ad Password O Boot is you will ot have to type your password upo resumig the system from the Susped or Save-to-Disk modes. Password O Resume will work oly if Password O Boot is eabled. Boot sector protectio must be set to [Normal] to istall or upgrade a operatig system. POINT If you set a password, write it dow ad keep it i a safe place. If you forget the password, you will have to cotact your support represetative to regai access to your secured fuctios ad data. Eterig a password icorrectly 3 times i a row will cause the keyboard ad mouse to be locked out ad the warig [System ] to be displayed. If this happes restart the computer by turig the power off ad o with the power switch ad use the correct password o reboot. 23

24 LifeBook C Series BIOS PhoeixBIOS Setup Utility Mai Advaced Security Power Boot Ifo Exit Supervisor Password Is: Clear User Password Is: Clear Set Supervisor Password [Eter] Set User Password [Eter] Miimum User Password Legth: [0] Press [Eter] key to set Supervisor Password to eable ay password features. Password o Boot: Password o Resume: Boot from Removable Media: Floppy Disk Access: Hard Disk Security Ower Iformatio Hard Disk Boot Sector: [All] [All] [Normal] The password etry is required to eter BIOS Setup. F1 ESC Help Exit Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 14. Security Meu Table 14: Fields, Optios ad Defaults for the Security Meu Meu Field Optios Default Descriptio Supervisor Password is: Clear A display-oly field. Set is displayed whe the system supervisor password is set ad Clear whe it is ot. User Password is: Clear A display-oly field. Set is displayed whe the geeral user password is set, ad Clear whe it is ot. Set Supervisor Password [Eter] Sets, chages or cacels the Supervisor Password. The Supervisor Password may be up to seve characters log ad must iclude oly letters or umbers (o symbols). Passwords are NOT casesesitive. To cacel a password press the Eter key istead of eterig characters i the Eter New Password field ad i the Re-eter New Password field. Whe a Supervisor Password is set it must be used to access the BIOS setup utility. Set User Password [Eter] This field ca oly be accessed if the Supervisor Password is set. This field sets, chages or cacels the User Password. The User Password may be up to seve characters log ad must iclude oly letters or umbers (o symbols). Passwords are NOT casesesitive. To cacel a password press the Eter key istead of eterig characters i the Eter New Password field ad i the Reeter New Password field. Whe a User Password is set it must be used to access the BIOS setup utility. Miimum User Password Legth: [0] 24

25 Security Meu Table 14: Fields, Optios ad Defaults for the Security Meu Meu Field Optios Default Descriptio Password o Boot: First Boot Every Boot Whe set to DIsabled, o password is required. Whe set to First Boot, a password (User or Supervisor) is required after the Power O Self Test (POST) before the operatig system will be read from a disk. If Every Boot is set, a password (User or Supervisor) is required after the Power O Self Test (POST) every time the system is booted (before the operatig system is read from the disk). Password o Resume: Eabled Whe set to Eabled, a password (User or Supervisor) is required before the operatig system will resume. Whe set to o password is required. If o Supervisor Password is set this feature is ot available ad o password is required. Boot from Removable Media: All Supervisor oly [All] Eable password allows supervisor access oly. Floppy Disk Access: All Supervisor oly [All] Eable password allows supervisor access oly. Hard Disk Security: Cofigures hard disk security features Ower Iformatio: Sets Ower iformatio. Hard Disk Boot Sector: Normal Write Protected [Normal] Sets protectio mode for hard disk drive. 25

26 LifeBook C Series BIOS Hard Disk Security Submeu of the Security Meu The Hard Disk Security Submeu is for cofigurig hard disk security features. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit Hard Disk Security Primary Master: Primary Slave: The feature is disabled. [Eabled] The hard disk is locked with the password. Data i the locked disk caot be read o ay systems other tha the origial system o which it is locked or systems that have the idetical password settig. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 15. Hard Disk Security Submeu Table 15: Fields, Optios ad Defaults for the Hard Disk Security Submeu of the Security Meu Meu Field Optios Default Descriptio Primary Master: Eabled Primary Slave: Eabled : No password protectio. Eabled: The hard disk is locked with the password. Data i the locked disk caot be read o ay systems other tha the origial system o which it is locked or systems that have the idetical password settig. 26

27 Security Meu Ower Iformatio Submeu of the Security Meu The Ower Iformatio Submeu is for settig ower iformatio. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Exit Ower Iformatio Ower Iformatio Is: Set Ower Iformatio Foregroud Color: Backgroud Color: Clear [Eter] [Gray] [Black] Press [Eter] key to set ower iformatio. Up to 80 characters ca be set. Available characters are ASCII codes from 32 through 126. The ower iformatio is always displayed at the bottom lie of the scree durig POST. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 16. Ower Iformatio Submeu Table 16: Fields, Optios ad Defaults for the Ower Iformatio Submeu of the Security Meu Meu Field Optios Default Descriptio Ower Iformatio Is: Clear Display oly. Set Ower Iformatio: [Eter] Field to write ower iformatio (i.e., ame). Foregroud Color: Black Blue Gree Cya Red Mageta Brow White Gray Light Blue Light Gree Light Cya Light Red Light Mageta Yellow Bright White [Gray] Select a color for the foregroud. Backgroud Color: Black Blue Gree Cya Red Mageta Brow White Gray Light Blue Light Gree Light Cya Light Red Light Mageta Yellow Bright White [Black] Select a color for the backgroud. Exitig from the Security Meu Whe you have fiished settig the parameters o the Security Meu, you ca either exit from setup utility or move to aother meu. If you wish to exit from setup utility, press the Esc key to go to the Exit Meu. If you wish to move to aother meu, use the cursor keys. 27

28 LifeBook C Series BIOS POWER MENU SETTING POWER MANAGEMENT FEATURES The Power meu allows you to set ad chage the power maagemet parameters. Follow the istructios for Navigatig Through the Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig tables show the ames of the meu fields for the Power meu ad its submeus, all of the optios for each field, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. POINTS I ACPI operatig systems Auto-susped Timeout, Hard Disk Timeout, ad Video Timeout features are available exclusively through the operatig system. Whe resumig from a Save-to-Disk suspesio there will be a delay while the cotets of system memory ad operatig parameters are loaded from the hard drive. CAUTIONS I Save-to-Disk mode there is o idicatio o the Status Idicator to let you kow you are suspeded rather tha shut off from the power switch. You may wat to make a habit of always tryig the Susped/ Resume butto before usig the power switch. Resume o Modem rig whe eabled will draw power from the bridge battery aloe whe your system is ruig off battery power. This may potetially drai your bridge battery. Disablig Resume o Modem rig will prevet this from happeig. 28

29 Security Meu PhoeixBIOS Setup Utility Mai Advaced Security Power Boot Ifo Exit Power Savigs: [Customized] Hard Disk Timeout: [Off] Display Timeout: [Off] Stadby Timeout: [4 Miutes] Auto Susped Timeout: [15 Miutes] Susped Mode: [Susped] Auto Save To Disk: [Off] Resume O Modem Rig: [Off] Resume O Time: [Off] Resume Time: [00:00:00] Advaced Features Select Power Maagemet Mode. Choosig modes chages system power maagemet settigs. Maximum Power Savigs coserves the greatest amout of system power while Maximum Performace coserves power but allows greatest system performace. To alter these settig, choose Customize. To tur off power maagemet, choose. F1 ESC Help Exit Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 17. Power Meu Table 17: Fields, Optios ad Defaults for the Power Meu Meu field Optios Default Descriptio Power Savigs: Customized Maximum Power Savigs Maximum Performace Hard Disk Timeout: Off 30 secods to 20 Miutes Display Timeout: Off 2 to 20 Miutes [Customized] [Off] [Off] Sets the power savigs parameters to a factory istalled combiatio of parameters, a custom set of parameters set by you or o power savig features. Sets the legth of time that the hard drive ca be iactive before your otebook automatically turs off the power to the hard drive cotroller ad drive motor. If you choose a factory istalled combiatio of parameters, this field will display the settig. If you choose to customize the parameters you will be able to set this yourself. The optios available vary from Off, which has o iactivity shutoff, to 20 miutes. Sets the legth of time without ay user iput device activity before the display is tured off. If you choose a factory combiatio of parameters, this field will display the settig. If you choose to customize the parameters, you will be able to set this yourself. Off has o iactivity shutoff. Stadby Timeout: Off 1 to 16 Miutes [4 Miutes] Sets the legth of time without ay user iput device activity before the CPU is set to half speed ad the display ad the hard drive are tured off. If you choose a factory combiatio of parameters, this field will display the settig. If you choose to customize the parameters you will be able to set this yourself. 29

30 LifeBook C Series BIOS Table 17: Fields, Optios ad Defaults for the Power Meu Meu field Optios Default Descriptio Auto Susped Timeout: Off 5 to 60 miutes [15 Miutes] Sets the legth of time without ay I/O activity before your otebook goes ito Susped mode. If you choose a factory combiatio of parameters this field will display that settig. If you choose to customize the parameters you will be able to set this yourself. Off has o iactivity suspesio. Susped Mode: Susped Save to Disk* *Note that Save to Disk is applicable to Widows 98 operatig system oly) [Susped] Sets the state of suspesio used. If you choose Susped, operatio will be suspeded. Power will still be supplied to system memory, but everythig else will be powered dow or will eter a very low power state. If you choose Save-to-Disk, your otebook will save all of system memory ad operatig parameters to the hard drive before turig your otebook to the pseudo-off coditio. Auto Save to Disk: Off After 1 Hour [Off] Whe set to After 1 Hour, your otebook will automatically save all of system memory ad the operatig parameters to the hard drive, ad go to the pseudo-off if you leave your otebook i Susped mode for a hour. Resume O Modem Rig: Off O [Off] Sets whether or ot to Resume from a suspesio state whe a message is received by telephoe lie. This feature will ot operate if the Save-to-Disk mode is eabled. This feature applies to iteral ad exteral modems. Resume O Time: Off O [Off] Sets whether or ot to resume from a suspesio state at a desigated time. This feature is available from either the Susped mode or the Save-to-Disk mode. Resume Time: 00:00:00 to 23:59:59 [00:00:00] Sets the desigated time, o a 24-hour clock, whe the otebook is to automatically resume operatio from the Susped state. The format of the clock settig is hours:miutes:secods. Each segmet of the time is set separately, either by icremetig or by typig i the umbers. You move betwee the segmets with the [Tab] key or the [Shift]+[Tab] keys. This oly applies whe Resume o Time is set to O. Advaced Features: Whe selected, opes the Advaced Features submeu which allows settig additioal power savig parameters. Factory Istalled Values for Power Savig Profiles Hard Disk Timeout Video Timeout Stadby Timeout Auto Susped Timeout Customized: Off Off 4 Miutes 15 Miutes Maximum Power Savigs: 30 Secods 2 Miutes 1 Miute 5 Miutes Maximum Performace: Off Off Off 15 Miutes : Off Off Off Off Sample Customized Profile: (To get eve better battery life keep the display ad volume settigs as low as possible ad use the sample customized profile.) 2 Miutes 1 Miute 1 Miute 5 Miutes 30

31 Power Meu Advaced Features Submeu of the Power Meu The Advaced Features submeu is for settig some o-time related power savig parameters. PhoeixBIOS Setup Utility Power Advaced Features Susped/Resume Switch: Lid Closure Susped: Lid Ope Resume: Performace cotrol: [Eabled] [O] [O] [Fixed] Cofigures the Susped/Resume switch. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 18. Advace Features Submeu Table 18: Fields, Optios ad Defaults for the Advaced Features Submeu of the Power Meu Meu Field Optios Default Descriptio Susped/Resume Switch: Eabled [Eabled] Sets the fuctio of the Susped/Resume butto whe your otebook is i a active state. The resume fuctio caot be disabled as it works regardless of ay other settigs. Lid Closure Susped: Off O [O] Eables ad disables your system from beig put i Susped mode wheever the cover is closed. Lid Ope Resume: Off O [O] Eables ad disables havig opeig the Display pael act as a automatic resume. Performace cotrol: Auto Fixed [Fixed] Cofigures the ACPI Performace Cotrol. Whe Auto is selected, power use is regulated by SpeedStep software. Whe FIxed is selected, the power use is ot automatically regulated. Exitig from Power Meu Whe you have fiished settig the boot parameters with the Power meu, you ca either exit from the setup utility or move to aother meu. If you wish to exit from the setup utility press the Esc key to go to the Exit meu. If you wish to move to aother meu, use the cursor keys. 31

32 LifeBook C Series BIOS BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Meu is used to select the order i which the BIOS searches sources for the operatig system. Follow the istructios for Navigatig Through the Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig tables show the ames of the meu fields for the Boot meu ad its submeu, all of the optios for each field, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Boot Ifo Exit Quick Boot: [Eabled] Boot Time Diagostic Scree: Preboot Executio Eviromet Boot Device Priority All diagostic tests will be doe. [Eabled] Some diagostic tests may be skipped while bootig to speed up. [Auto] Diagostic tests will be automatically skipped or doe accordig to the order of the ACPI OS. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 19. Boot Meu Table 19: Fields, Optios ad Defaults for the Boot Meu Meu Field Optios Default Descriptio QuickBoot Mode: Eabled Auto [Eabled] Turs o ad off bootig with a trucated set of Power O Self Test. (Fewer tests mea faster tur o.) Boot-time Diagostic Scree: Eabled Turs o ad off display of test results istead of Fujitsu logo scree durig Power O Self Test. Preboot Executio Eviromet Eabled Turs o ad off boot from etwork server optios. Boot Device Priority Selects the Boot Device Priority submeu This meu allows settig up the source for the operatig system. 32

33 Boot Meu The Boot Device Priority Submeu of the Boot Meu The Boot Device Priority Submeu is for settig the order of checkig of sources for the operatig system. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Boot Boot Device Priority +Floppy Disk Drive +Hard Disk Drive ATAPI CD-ROM Drive The top device has the highest priority. <Eter> expads or collapses devices with a + or -. <Ctrl+Eter> expads all. < > or < > selects a device. <+>/<Space> or <-> moves the device up or dow. <Shift+1> eables or disables a device. Select Meu Eter Chage Values Select Sub-Meu F9 Setup Defaults F10 Save ad Exit Figure 20. Boot Device Priority Submeu Table 20: Fields, Optios ad Defaults for the Boot Device Priority Submeu of the Boot Meu Meu Field Optios Default Descriptio +Floppy Disk Drive The boot selectios determie the order i which the BIOS searches for the operatig system durig a startup sequece. To chage the order highlight oe source by usig the [up] or [dow] cursor keys ad the press the [+] or [-] key to chage the order umber for that source. Be sure to save your chaged order whe you exit the BIOS setup utility. +Hard Disk Drive NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certai files may be overwritte, depedig upo your operatig eviromet. ATAPI CD-ROM Drive Exitig from Boot Meu Whe you have fiished settig the boot parameters with the Boot meu, you ca either exit from the setup utility or move to aother meu. If you wish to exit from the setup utility press the Esc key to go to the Exit meu. If you wish to move to aother meu, use the cursor keys. 33

34 LifeBook C Series BIOS INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION The Ifo meu is a display oly scree that provides the cofiguratio iformatio for your otebook. The followig table shows the ames of the meu fields for the Ifo meu ad the iformatio displayed i those fields. These fields are for iformatio purposes oly, ad caot be modified by the user. POINT The iformatio, icludig CPU type ad speed, ad total memory, displayed o this scree varies accordig to the uit you purchased. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Boot Ifo Exit BIOS Versio: 1.02 BIOS Date: 09/03/2001 BIOS Area: E400h - FFFFh CPU Type: Petium(R) III processor CPU Speed: 1.00 GHz L1 Cache: 32 KB L2 Cache: 256 KB Total Memory: 128 MB Oboard Memory: 128 MB SDRAM Memory Slot: Noe Select Meu Chage Values Eter Select Sub-Meu F9 F10 Setup Defaults Save ad Exit Figure 21. Ifo Meu Table 21: Fields, Optios ad Defaults for the Ifo Meu Note that some of the parameters reflected below may be differet from those o your scree, depedig upo system cofiguratio. Meu Field Default Meu Field Default BIOS Versio: 1.02 L1 Cache: 32 KB BIOS Date: 09/03/2001 L2 Cache: 256 KB BIOS Area: E400h FFFFh Total Memory: 128 MB CPU Type: Petium(R) III processor Oboard Memory 128 MB SDRAM CPU Speed: 1.00 GHz Memory Slot Noe 34

35 Ifo Meu EXIT MENU LEAVING THE SETUP UTILITY The Exit Meu is used to leave the setup utility. Follow the istructios for Navigatig Through the Setup Utility to make ay chages. (See Navigatig Through The Setup Utility o page 2 for more iformatio.) The followig table shows the ames of the meu fields for the Exit meu, the default settigs ad a descriptio of the field s fuctio ad ay special iformatio eeded to help uderstad the field s use. PhoeixBIOS Setup Utility Mai Advaced Security Power Savigs Boot Exit Exit Savig Chages Exit Discardig Chages Load Setup Defaults Discard Chages Save Chages Exit System Setup ad save your chages to CMOS. Select Meu Chage Values Eter Select Sub-Meu F9 F10 Setup Defaults Save ad Exit Figure 22. Exit Meu Table 22: Fields, Optios ad Defaults for the Exit Meu Meu Field Optioal Keyboard Shortcut Default Descriptio Exit Savig Chages Exit Discardig Chages Press F10 key Exit Savig Chages ad Exit will store all the etries o every meu of the setup utility to the BIOS memory ad the exit the setup utility. A cofirmatio message Save Cofiguratio chages ad exit ow? [Yes] [No] will be displayed. Selectig Exit Discardig Chages ad Exit will exit the setup utility with out writig to the BIOS memory. A setup warig message Cofiguratio has ot bee saved! Save before exitig? [Yes] [No] will be displayed whe your settigs have chaged. Whe the BIOS recogizes the Exit Discardig Chages selectio it will load the operatig system ad begi operatio. 35

36 LifeBook C Series BIOS Table 22: Fields, Optios ad Defaults for the Exit Meu Meu Field Optioal Keyboard Shortcut Default Descriptio Load Setup Defaults Press F9 key Selectig Load Setup Defaults will load the factory preset default values for all meu fields, the display the message Load default cofiguratio ow? [Yes] [No]. Whe cofirmed the setup utility will retur to the Exit Meu. To retur to aother meu follow the directios i the Navigatig Through the Setup Utility Sectio. Discard Chages Selectig Discard Chages will load the previous values i BIOS memory for all meu fields. The message Load previous cofiguratio ow? [Yes] [No] will be displayed. Whe cofirmed the setup utility will retur to the Exit meu. To retur to aother meu, follow the directios i the Navigatig Through the Setup Utility Sectio. Save Chages Selectig Save Chages will cause the ew settigs i all meus to be writte to the BIOS memory. The message Save cofiguratio chages ow? [Yes] [No] will be displayed. Whe cofirmed, the setup utility will retur to the Exit meu. To retur to aother meu, follow the directios i the Navigatig Through the Setup Utility sectio. 36