CHAPTER 3. Intro Page POLYPRO ULTRX QLINE D

Transcription

1 Polyester Intro Page CHAPTER POLYPRO ULTRX QLINE D POLYPRO polyester enclosures perform exceptionally well in applications where harsh chemicals, weather extremes and corrosive environments demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of ULTRX fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. QLINE D polycarbonate and ABS enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. Tough as well as stylish, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-ul rated alternative. 20 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

2 Chapter Contents Polyester POLYPRO, Type X POLYPRO Polyester Enclosures...22 POLYPRO WiFi, Type X...2 Adjustable Panel Block Kit...26 Polyester Mounting Bracket Kits...26 Aluminum Swing-Out Panels...26 Stainless Steel Latches (Padlockable)...27 Hinge Retainers...27 Fiberglass Continuous Hinge Continuous Hinge, Type X...28 Swing-Out Panel Kit...21 Quick-Release Latch Kit Hinge-Cover WiFi, Type X...22 Swing-Out Panel Kit...2 Threaded Panel Extenders...2 Quick-Release Latch Kit Panels for WiFi Cabinets and Small Wall-Mount Enclosures... Screw- or Hinge-Cover with Quick-Release Latch Screw- or Hinge-Cover with Quick-Release Latch, Type X...26 Fiberglass Mounting Bracket Kit...29 Overlapping Cover Raised Cover with Screws, Type X... Raised Cover with Latches, Type X...2 Flat Cover with Screws, Type X... Flat Cover with Latches, Type X...6 Flat Clear Cover with Latches, Type X...2 ULTRX ULTRX, Type X ULTRX WiFi, Type X Panel Bracket Kit...26 Swing-Out Panel...26 Grounding Device...26 Panels for Type R,, X, 12 and 1 Enclosures Rack Angles (Type RA) Door Stop Kit Keylock Kit and Padlock Kit Swing Frame ULTRX Key Insert ULTRX Mounting Bracket Kit Screw Insert Kit Self-Tapping Screws Hinge-Cover with -Point Latch or Quick-Release Latches Hinge-Cover with -Point Latch or Quick-Release Latches, Type X Wall-Mount Disconnect Fiberglass Disconnect, Type X...27 Disconnect Mounting Space Hazardous Location ZONEX Terminal Enclosure Free-Stand Free-Stand, Type X Accessory Selection for Free-Stand, Type X Rack Mounting Accessory Selection for Free-Stand, Type X...28 Two-Door Free-Stand Two-Door Free-Stand, Type X...28 Bottom Support Kits Polycarbonate and ABS QLINE D QLINE D Pushbutton, Type X QLINE D, Type X Hinge Kit Mounting Bracket Kit Hardware Kit Panels QLINE D, EMC, Type X...29 QLINE E QLINE E, Type X Brass Inserts...00 Hinge Kit...00 Mounting Bracket Kit...00 Hardware Kit...00 Panels...00 QLINE E, EMC, Type X...02 QLINE I QLINE I, Type X...0 Cover Screw Kit...10 Brass Insert Kit...10 Panel Depth Fitting...10 Swing Panel...10 Hinge Kit...11 Mounting Bracket Kit...11 Hardware Kit...11 Extension Rings...11 Panels...11 QLINE I, EMC, Type X...12 EQUIPMENT PROTECTION PH FAX pentairprotect.com 21

3 Polyester POLYPRO, Type X POLYPRO, Type X POLYPRO Polyester Enclosures INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 CSA File No. 2186; Type, X, 12, 1 (solid covers only) IEC 60529, IP66 APPLICATION POLYPRO polyester enclosures perform exceptionally well in applications where harsh chemicals, weather extremes and corrosive environments demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. SPECIFICATIONS non-glass-filled polyester material offers superior UV resistance; eliminates fiberbloom associated with fiberglass Provides excellent chemical resistance to a broad range of solvents, alkalis and acids resists cracking and provides excellent impact resistance Lighter-weight than fiberglass recyclable easy, dustless in-field modifications using standard tools overlapping tongue-and-groove raised cover and gasket provide a secure Type X seal removable snap-hinge cover allows for easy access to cover and body for modifications molded layout grid on inside of body and solid covers assists with component mounting molded-in embosses for rear panel mounting optional cover screws included with all models internal rail system and adjustable panel blocks allow for panel height adjustment and installation of multiple panels Scratch-resistant polycarbonate windows Standard models include body and cover, two mounting feet, two latch assemblies with optional cover screws and hardware (adjustable panel blocks and panels sold separately) FINISH Standard finish is RAL 705 light-gray textured inside and out ACCESSORIES See also Accessories. Adjustable Panel Block Kit Panels for Junction Boxes HOL-SEALERS Hole Seals Aluminum Swing-Out Panels Stainless Steel Latches (Padlockable) Hinge Retainers MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: PCR 22 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

4 Polyester POLYPRO, Type X Standard Product Catalog Number AxBxC Cover Type Steel Panel Aluminum Panel Panel Size D x E F G A6PHC 6.12 x.12 x.8 Solid A6P A6PAL.88 x x 105 x x A6PHCW 6.12 x.12 x.8 Window A6P A6PAL.88 x x 105 x x A66PHC 6.12 x 6.12 x.8 Solid A6P6 A6P6AL.88 x x 5 x x A66PHCW 6.12 x 6.12 x.8 Window A6P6 A6P6AL.88 x x 5 x x A86PHC 8.12 x 6.12 x.8 Solid A8P6 A8P6AL 6. x x 5 x x A86PHCW 8.12 x 6.12 x.8 Window A8P6 A8P6AL 6. x x 5 x x A88PHC 8.12 x 8.12 x.8 Solid A8P8 A8P8AL 6. x x 206 x x A88PHCW 8.12 x 8.12 x.8 Window A8P8 A8P8AL 6. x x 206 x x A108PHC 1 x 8.12 x.8 Solid A10P8 A10P8AL 8. x x 5 x x A108PHCW 1 x 8.12 x.8 Window A10P8 A10P8AL 8. x x 5 x x A10106PHC 10.0 x 10.0 x 6.8 Solid A10P10 A10P10AL 8. x x 5 x x A10106PHCW 10.0 x 10.0 x 6.8 Window A10P10 A10P10AL 8. x x 5 x x A16PHC x x 6.8 Solid A12P10 A12P10AL 10. x x 6 x x A16PHCW x x 6.8 Window A12P10 A12P10AL 10. x x 6 x x A1128PHC 1.02 x x 8.5 Solid A1P12 A1P12AL 12. x x 05 x x A1128PHCW 1.02 x x 8.5 Window A1P12 A1P12AL 12. x x 05 x x A1618PHC x 1.01 x 8.5 Solid A16P1 A16P1AL 1. x x 56 x 212 x 27 9 A1618PHCW x 1.01 x 8.5 Window A16P1 A16P1AL 1. x x 56 x 212 x 27 9 A181610PHC x.9 x 10.5 Solid A18P16 A18P16AL 16. x x 05 x 26 x A181610PHCW x.9 x 10.5 Window A18P16 A18P16AL 16. x x 05 x 26 x Purchase panels separately. Panels are available in aluminum, mild steel, stainless steel, conductive and composite materials. H J L M N W EQUIPMENT PROTECTION PH FAX pentairprotect.com 2

5 Polyester POLYPRO, Type X POLYPRO WiFi, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 CSA File No. 2186; Type, X, 12, 1 (solid covers only) IEC 60529, IP66 APPLICATION POLYPRO WiFi enclosures provide protection for wireless equipment in both indoor and outdoor locations. The polyester construction and wood panel allow WiFi and WLAN signals to pass through the enclosure unimpeded. They perform exceptionally well in applications where harsh chemicals, weather extremes, a corrosive environment or flames demand toughness from a lightweight enclosure. Providing excellent ultraviolet protection and a tight environmental seal, these versatile, feature-rich enclosures are also recyclable. FEATURES non-glass-filled polyester material offers superior UV resistance; eliminates fiberbloom associated with fiberglass Provides excellent chemical resistance to a broad range of solvents, alkalis and acids resists cracking and provides excellent impact resistance Lighter-weight than fiberglass recyclable easy, dustless in-field modifications using standard tools overlapping tongue-and-groove raised cover and gasket provide secure Type X seal removable snap-hinge cover allows for easy access to cover and body for modifications molded layout grid on inside of body and solid covers assists with component mounting molded-in embosses for rear panel mounting internal rail system and adjustable panel blocks allow for panel height adjustment and installation of multiple panels SPECIFICATIONS Scratch-resistant polycarbonate windows Standard models include body and cover, two mounting feet, two latch assemblies with optional cover screws and hardware, and /-in. plywood panel FINISH Polyester material is RAL 705 light-gray textured finish inside and out Bulletin: DWS12 2 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

6 Polyester POLYPRO, Type X Standard Product Catalog Number AxBxC Door Type Panel Size D x E D66WF 6.12 x 6.12 x.8 Solid.88 x.88 5 x 5 x x 12 D66WFW 6.12 x 6.12 x.8 Window.88 x.88 5 x 5 x x 12 D1618WF x 1.01 x 8.5 Solid 1. x x 56 x 212 x 27 D1618WFW x 1.01 x 8.5 Window 1. x x 56 x 212 x 27 F G H J L M N W EQUIPMENT PROTECTION PH FAX pentairprotect.com

7 Polyester POLYPRO, Type X Adjustable Panel Block Kit Panel blocks slide inside POLYPRO internal rail system for panel height adjustment within top 5 in. of enclosure. Allows for installation of multiple panels. Bulletin: PCRY Catalog Number Qty. APNLBLK Includes Allen wrench Polyester Mounting Bracket Kits Replacement POLYPRO mounting brackets are sold in sets of two and include hardware for mounting to enclosure. Included with standard POLYPRO models. Bulletin: PCRY Catalog Number Description (in.) Qty. APOLYFT.00 2 APOLYFT APOLYFT APOLYFT APOLYFT APOLYFT APOLYFT Aluminum Swing-Out Panels Includes four POLYPRO Adjustable Panel Blocks. No enclosure modification is required for installation. Bulletin: PCRY Catalog Number D x E (in.) D x E (mm) A6PSWPNL 5.00 x x 92 A66PSWPNL 5.00 x x 1 A86PSWPNL 7.00 x x 1 A88PSWPNL 7.00 x x 19 A108PSWPNL 9.00 x x 19 A1010PSWPNL 9.00 x x 2 A1PSWPNL x x 2 A112PSWPNL 1.00 x x 295 A161PSWPNL.00 x x 6 A1816PSWPNL x.62 2 x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

8 Polyester POLYPRO, Type X Stainless Steel Latches (Padlockable) Stainless Steel Latches can be retrofitted on all POLYPRO models with no modification or drilling required. Hinge/latch constructed of corrosion-resistant polyester with a Type 16L stainless steel bail. Included with standard POLYPRO models. Bulletin: PCRY Catalog Number Qty. AQRLSS6 2 Hinge Retainers Hinge Retainers can be field-installed without modification to POLYPRO hinges for applications where easy cover removal is not desired. Two retainers per enclosure is recommended. Kit includes ten hinge retainers. Bulletin: PCRY Catalog Number Description Pkg. Qty. AHGCLP POLYPRO Hinge Retainers 10 EQUIPMENT PROTECTION PH FAX pentairprotect.com 27

9 Fiberglass Continuous Hinge Fiberglass Continuous Hinge Continuous Hinge, Type X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 CSA File No. 2186: Type, X, 12, 1 IEC 60529, IP66 APPLICATION The efficient design and simple construction of these enclosures make them durable in corrosive environments, yet aesthetically pleasing. Corner latches provide unobstructed access. The continuous hinge provides a secure seal, and double latching creates added security. SPECIFICATIONS compression-molded fiberglass has outstanding chemicaland temperature-resistance qualities and exhibits excellent weatherability and physical properties Fiberglass is easily punched, drilled, filed or sawed Gasket assures water-tight and dust-tight seal Polyester mounting brackets and stainless steel attachment screws are provided with each enclosure Scratch-resistant polycarbonate windows are permanently bonded in place molded-in-place threaded brass inserts and plated steel screws are provided for mounting optional panels and terminal block kits removable hinged cover attached to body with Type 16 stainless steel hinge pin Screw-cover enclosures are secured with two captivated Type 16 stainless steel slotted cover screws enclosures with quick-release latches have corrosion-resistant polyester latches located in corners that provide unobstructed access to enclosure Hinge pin and bail are corrosion-resistant Type 16 stainless steel Padlock provisions included in each latch material is halogen free FINISH Standard fiberglass material finish is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Threaded Panel Extenders Quick-Release Latch Kit Swing-Out Panel Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A8 28 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

10 Fiberglass Continuous Hinge Standard Product Solid Cover Catalog Number AxBxC Type Steel Panel Alum. Panel Panel Size D x E Mounting G x H Overall L x W F A66CHSCFG 6.00 x 6.00 x.00 Screw A6P6 A6P6AL.88 x x x x 2 x 102 Cover 12 x x x A66CHQRFG 6.00 x 6.00 x.00 Quick A6P6 A6P6AL.88 x x x x 2 x 102 Release 12 x x x A86CHSCFG 8.00 x 6.00 x.00 Screw A8P6 A8P6AL 6. x x x x 2 x 102 Cover 171 x x x A86CHQRFG 8.00 x 6.00 x.00 Quick A8P6 A8P6AL 6. x x x x 2 x 102 Release 171 x x x A1086CHSCFG x 8.00 x 6.00 Screw A10P8 A10P8AL 8. x x x x 20 x 2 Cover 222 x x x A1086CHQRFG x 8.00 x 6.00 Quick A10P8 A10P8AL 8. x x x x 20 x 2 Release 222 x x x A16CHSCFG x x 6.00 Screw A12P10 A12P10AL 10. x x x x x 2 Cover 27 x x x A16CHQRFG x x 6.00 Quick A12P10 A12P10AL 10. x x x x x 2 Release 27 x x x A1128CHSCFG 1.00 x x 8.00 Screw A1P12 A1P12AL 12. x x x x 05 x 20 Cover 2 x x 70 x A1128CHQRFG 1.00 x x 8.00 Quick A1P12 A1P12AL 12. x x x x 05 x 20 Release 2 x x 70 x A1618CHSCFG x 1.00 x 8.00 Screw A16P1 A16P1AL 1. x x x x 56 x 20 Cover x 27 0 x x A1618CHQRFG x 1.00 x 8.00 Quick A16P1 A16P1AL 1. x x x x 56 x 20 Release x 27 0 x x A181610CHSCFG x x Screw A18P16 A18P16AL 16. x x x x 06 x Cover x x x A181610CHQRFG x x Quick A18P16 A18P16AL 16. x x x x 06 x Release x x x Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes. Standard Product Window Cover Catalog Number AxBxC Type Steel Panel Alum. Panel Panel Size D x E A66CHSCFGW 6.00 x 6.00 x.00 Screw A6P6 A6P6AL.88 x.88 2 x 2 x 102 Cover 12 x 12 A66CHQRFGW 6.00 x 6.00 x.00 Quick A6P6 A6P6AL.88 x.88 2 x 2 x 102 Release 12 x 12 A86CHSCFGW 8.00 x 6.00 x.00 Screw A8P6 A8P6AL 6. x x 2 x 102 Cover 171 x 12 A86CHQRFGW 8.00 x 6.00 x.00 Quick A8P6 A8P6AL 6. x x 2 x 102 Release 171 x 12 A1086CHSCFGW x 8.00 x 6.00 Screw A10P8 A10P8AL 8. x 6.88 x 20 x 2 Cover 222 x 1 A1086CHQRFGW x 8.00 x 6.00 Quick A10P8 A10P8AL 8. x 6.88 x 20 x 2 Release 222 x 1 A16CHSCFGW x x 6.00 Screw A12P10 A12P10AL 10. x x x 2 Cover 27 x 226 A16CHQRFGW x x 6.00 Quick A12P10 A12P10AL 10. x x x 2 Release 27 x 226 A1128CHSCFGW 1.00 x x 8.00 Screw A1P12 A1P12AL 12. x x 05 x 20 Cover 2 x 276 A1128CHQRFGW 1.00 x x 8.00 Quick A1P12 A1P12AL 12. x x 05 x 20 Release 2 x 276 A1618CHSCFGW x 1.00 x 8.00 Screw A16P1 A16P1AL 1. x x 56 x 20 Cover x 27 A1618CHQRFGW x 1.00 x 8.00 Quick A16P1 A16P1AL 1. x x 56 x 20 Release x 27 A181610CHSCFGW x x Screw A18P16 A18P16AL 16. x x 06 x Cover x 78 A181610CHQRFGW x x x 06 x Quick Release A18P16 A18P16AL 16. x 1.88 x 78 Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes. J K O P Q T U Mounting G x H Overall L x W F J K M N O P Q T U 6.9 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 70 x x x x 70 x x x x x x x x x x x x x x x x x EQUIPMENT PROTECTION PH FAX pentairprotect.com 29

11 Fiberglass Continuous Hinge #1/-10 X-X X X #1/ SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

12 Fiberglass Continuous Hinge Quick-Release Latch Kit Two fiberglass-reinforced gray polyester latches with 16L stainless steel bail and screw-hole plugs are included in each package. Supplied with Continuous Hinge, Type X enclosures and available for Fiberglass Hinged Cover WiFi Cabinet, Type X. Kit converts screw-cover enclosures to quick-release without modification. No tools needed to install. Padlocking provision is included. Bulletin: A8Y Catalog Number Description Kit Qty. AL8 Quick-Release Latch Kit 2 Swing-Out Panel Kit The Swing-Out Panel Kit provides an attractive, cost-effective solution for installing front-mounted panels in Continuous Hinge, Type X, and Overlapping Cover, Type X enclosures. No drilling required. Bulletin: A8Y Catalog Number Fits Enclosure A x B (in.) Fits Enclosure A x B (mm) A6SPK6C 6.00 x x 2 A8SPK6C 8.00 x x 2 A10SPK8C x 8.00 x 20 A12SPK10C x x A16SPK1C x x 56 A18SPK16C x x 06 A1SPK12C 1.00 x x 05 EQUIPMENT PROTECTION PH FAX pentairprotect.com 21

13 Fiberglass Continuous Hinge Hinge-Cover WiFi, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability rating per UL 508 NEMA/EEMAC Type, X, 12, and 1 Window flammability rating per UL 508 CSA File No. LR2186:Type, X, 12, and 1 IEC 60529, IP66 Cabinets with solid doors are plenum rated. APPLICATION The fiberglass WiFi Cabinet is a secure, hinged enclosure that does not impede WiFi or WLAN signals. It is ideal for housing wireless equipment in locations such as tunnels, floor vaults, marinas, outside walls or rooftops. FEATURES Fiberglass is easily punched, drilled, filed or sawed Gasket assures watertight and dusttight seal molded-in-place threaded brass inserts and plated steel screws are provided for mounting optional panels and terminal block kits removable hinged cover attached to body with Type 16 stainless steel hinge pin Screw cover enclosures are secured with two captivated Type 16 stainless steel slotted cross-point cover screws Available quick-release latches are corrosion-resistant polyester located in corners to provide unobstructed access to enclosure Knockout padlock provisions included in each latch material is halogen free SPECIFICATIONS enclosure and door made of molded fiberglass polyester that resists chemicals and temperature change Scratch-resistant GE Lexan Margard windows are permanently bonded in place Polyester mounting brackets and stainless steel attachment screws are provided with each enclosure Hinge pin and bail are corrosion-resistant Type 16 stainless steel includes a /-in. plywood panel for mounting equipment Margard is a trademark of General Electric FINISH Fiberglass material is light gray inside and out. Bulletin: DWS12 Standard Product Solid Door Catalog Number AxBxC Panel Panel D X E D66CHSCFGP 6.00 x 6.00 x.00 A6P6WD.88 x.88 2 x 2 x x 12 D1618CHSCFGP x 1.00 x 8.00 A16P1WD 1. x x 56 x 20 x 27 D181610CHSCFGP x x A18P16WD 16. x x 06 x x 78 Wood panels included with enclosure. Optional steel panels must be ordered separately. Mounting G x H 6.9 x x x x x x 56 Overall Size L x W 6.50 x x x x x x 21 J K O P Q R T U Standard Product Window Door Catalog Number AxBxC Panel Panel D X E D66CHSCFGWP 6.00 x 6.00 x.00 A6P6WD.88 x.88 2 x 2 x x 12 D1618CHSCFGWP x 1.00 x 8.00 A16P1WD 1. x x 56 x 20 x 27 D181610CHSCFGWP x x A18P16WD 16. x x 06 x x 78 Mounting G x H 6.9 x x x x x x 56 Overall Size L x W 6.50 x x x x x x 21 J K O P Q R T U SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

14 Fiberglass Continuous Hinge X #1/-10 X #1/-10 X-X EQUIPMENT PROTECTION PH FAX pentairprotect.com 2

15 Fiberglass Continuous Hinge Quick-Release Latch Kit Two fiberglass-reinforced gray polyester latches with 16L stainless steel bail and screw-hole plugs are included in each package. Supplied with Continuous Hinge, Type X enclosures and available for Fiberglass Hinged Cover WiFi Cabinet, Type X. Kit converts screw-cover enclosures to quick-release without modification. No tools needed to install. Padlocking provision is included. Bulletin: A8Y Catalog Number Description Kit Qty. AL8 Quick-Release Latch Kit 2 Swing-Out Panel Kit The Swing-Out Panel Kit provides an attractive, cost-effective solution for installing front-mounted panels in Continuous Hinge, Type X, and Overlapping Cover, Type X enclosures. No drilling required. Bulletin: A8Y Catalog Number Fits Enclosure A x B (in.) Fits Enclosure A x B (mm) A6SPK6C 6.00 x x 2 A8SPK6C 8.00 x x 2 A10SPK8C x 8.00 x 20 A12SPK10C x x A16SPK1C x x 56 A18SPK16C x x 06 A1SPK12C 1.00 x x 05 Threaded Panel Extenders Threaded Panel Extenders are made of plated steel and designed to raise the panel mounting surface. Extenders attach to threaded internal pads. Male and female thread size is Each kit contains extenders. Bulletin: A80 Catalog Number Length (in.) Length (mm) APE APE SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

16 Fiberglass Continuous Hinge Panels for WiFi Cabinets and Small Wall- Mount Enclosures Panels are available in both steel and wood. Steel panels are 1 gauge steel with a white polyester powder paint finish. Wood panels are /-in. plywood and are unfinished. Wood panels are supplied with Fiberglass Hinged-Cover and POLYPRO Type X WiFi Cabinets. Bulletin: DWS12, PNLJ, PNLWM Catalog Number Material Panel Size D x E (in.) Panel Size D x E (mm) V (in.) V (mm) A6P6 Steel.88 x x A6P6WD Wood.88 x x A16P1 Steel 1. x x A16P1WD Wood 1. x x A18P16 Steel 16. x 1.88 x A18P16WD Wood 16. x 1.88 x EQUIPMENT PROTECTION PH FAX pentairprotect.com

17 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch Screw- or Hinge-Cover with Quick-Release Latch Screw- or Hinge-Cover with Quick-Release Latch, Type X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type, R,, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No. 2186: Type R,, X, 12 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Able to withstand harsh environments, these small enclosures feature a simple, traditional non-metallic design that is suitable for a broad range of applications. SPECIFICATIONS compression-molded fiberglass material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties Fiberglass material is easily punched, drilled, filed or sawed Seamless foam-in-place gasket assures water-tight and dusttight seal threaded internal bosses provided for mounting optional panels and terminal block kits Polycarbonate windows are permanently bonded in place Screw-cover enclosures have easily removable covers attached to body with internal plated steel hinges. Cover securely fastens to the body with four captivated Type 16 stainless steel cover screws. enclosures with quick-release latches have corrosion-resistant polyester hinges and polyester latches with a Type 16L stainless steel bail. Attached with Type 16 stainless steel screws. A Type 16L stainless steel padlock hasp is furnished with each enclosure. Sealing washers are furnished with enclosure material is halogen free FINISH Standard fiberglass material finish is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A50 26 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

18 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch Standard Product Solid Cover with Screws Catalog Number AxBxC Inside Dimensions A x B x C Steel Panel Aluminum Panel Panel Size D x E Mounting G x H A65JFGR 6.00 x.00 x x.00 x.9 No Panel No Panel No Panel. x x 102 x 127 x 102 x 1 No Panel 121 x 51 A85JFGR 8.00 x.00 x x.00 x.9 A6P A6PAL.88 x x x 102 x x 102 x 1 12 x x 51 A865JFGR 8.00 x 6.00 x x 6.00 x 5.19 A6P6 A6P6AL.88 x x x 2 x x 2 x x x 102 A1066JFGR x 6.00 x x 6.00 x 5.69 A8P6 A8P6AL 6. x x.00 x 2 x 2 21 x 2 x 171 x x 102 A1287JFGR x 8.00 x x 8.00 x 6.69 A10P8 A10P8AL 8. x x x 20 x x 20 x x 1 27 x 2 A1107JFGR 1.00 x x x x 7.19 A12P10 A12P10AL 10. x x x x 178 x x x x 20 A16128JFGR x x x x 8.19 A1P12 A1P12AL 12. x x x 05 x 20 9 x 05 x x 276 x A1819JFGR x 1.00 x x 1.00 x 8.69 A16P1 A16P1AL 1. x x x 56 x x 56 x 221 x 27 x 05 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. Standard Product Solid Cover with Quick-Release Latches Catalog Number AxBxC Inside Dimensions A x B x C Steel Panel Aluminum Panel Panel Size D x E Mounting G x H A65JFGQRR 6.00 x.00 x x.00 x 5.02 No Panel No Panel No Panel. x x 102 x 127 x 102 x 128 No Panel 121 x 51 A85JFGQRR 8.00 x.00 x x.00 x 5.02 A6P A6PAL.88 x x x 102 x x 102 x x x 51 A865JFGQRR 8.00 x 6.00 x x 6.00 x 5.28 A6P6 A6P6AL.88 x x x 2 x x 2 x 1 12 x x 102 A1066JFGQRR x 6.00 x x 6.00 x 5.78 A8P6 A8P6AL 6. x x.00 x 2 x 2 21 x 2 x x x 102 A1287JFGQRR x 8.00 x x 8.00 x 6.78 A10P8 A10P8AL 8. x x x 20 x x 20 x x 1 27 x 2 A1107JFGQRR 1.00 x x x x 7.28 A12P10 A12P10AL 10. x x x x 178 x x x x 20 A16128JFGQRR x x x x 8.28 A1P12 A1P12AL 12. x x x 05 x 20 9 x 05 x 2 x 276 x A1819JFGQRR x 1.00 x x 1.00 x 8.78 A16P1 A16P1AL 1. x x x 56 x x 56 x 22 x 27 x 05 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. Standard Product Window Cover with Quick-Release Latches Catalog Number AxBxC Inside Dimensions A x B x C Steel Panel Aluminum Panel Panel Size D x E Mounting G x H A865JFGQRPWR 8.00 x 6.00 x x 6.00 x 5.0 A6P6 A6P6AL.88 x x x 2 x x 2 x x x 102 A1066JFGQRPWR x 6.00 x x 6.00 x 5.5 A8P6 A8P6AL 6. x x.00 x 2 x 2 21 x 2 x 171 x x 102 A1287JFGQRPWR x 8.00 x x 8.00 x 6.5 A10P8 A10P8AL 8. x x x 20 x x 20 x x 1 27 x 2 A1107JFGQRPWR 1.00 x x x x 7.0 A12P10 A12P10AL 10. x x x x 178 x x x x 20 A16128JFGQRPWR x x x x 8.0 A1P12 A1P12AL 12. x x x 05 x 20 9 x 05 x 20 2 x 276 x A1819JFGQRPWR x 1.00 x x 1.00 x 8.5 A16P1 A16P1AL 1. x x x 56 x x 56 x 217 x 27 x 05 Purchase panels separately. Optional stainless steel, aluminum and composite material panels available for most sizes. Overall L x W Overall L x W 6.00 x.50 2 x x x x x x 6.50 x x x x x x x x x 68 F J K V X Y F J K V X Y Number of Latches 6.00 x x x x x x x x x x x x x x x x Overall L x W 8.00 x x x 7.9 x x x x 11.9 x x x x.9 57 x 91 Window Size M x N.55 x x x x x 5.8 x x x x x x x 281 F J K V Number of Latches EQUIPMENT PROTECTION PH FAX pentairprotect.com 27

19 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch 28 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

20 Fiberglass Screw- or Hinge-Cover with Quick-Release Latch Fiberglass Mounting Bracket Kit Bracket is molded from fiberglass reinforced polyester. Kit includes four brackets, hardware and installation instructions. Mounting hole dimensions with mounting brackets installed are: [G (6 mm)] x [H +.50 (1 mm)] See Screw- or Hinged-Cover with Quick-Release Latch, Type X tables for G and H dimensions. Bulletin: A50Y Catalog Number A50MFKR EQUIPMENT PROTECTION PH FAX pentairprotect.com 29

21 Fiberglass Overlapping Cover Overlapping Cover Raised Cover with Screws, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E5 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E5 Enclosure flammability per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No : Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Enclosures feature a raised, overlapping-cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with removable and hinged covers for application flexibility. SPECIFICATIONS compression-molded fiberglass construction overlapping solid raised-cover cover fastens with screws type 0 stainless steel piano hinges on hinged models integral mounting brackets enclosures protect equipment and operators from indirect electrical contact material is halogen free FINISH Standard fiberglass material finish is RAL 705 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

22 Fiberglass Overlapping Cover Standard Product Catalog Number AxBxC Door Fasteners D F G H I J RHJ8HWLG 9.70 x 7.71 x Hinged, x 196 x 0 2 screws RHJ8WLG 9.70 x 7.71 x screws x 196 x RHJ1HWLG x 9.69 x 6.16 Hinged, x 26 x 6 2 screws RHJ1WLG x 9.69 x 6.16 screws x 26 x RHJ112HWLG 1.62 x x 7.2 Hinged, x 295 x 18 2 screws RHJ112WLG 1.62 x x 7.2 screws x 295 x RHJ161HWLG.62 x 1.62 x 7.2 Hinged, x 6 x 18 2 screws RHJ161WLG.62 x 1.62 x 7.2 screws x 6 x RHJ1816HWLG 17.8 x.77 x 9. Hinged, x 00 x 20 2 screws RHJ1816WLG 17.8 x.77 x 9. screws x 00 x A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. K L P Q W Steel Panel Alum Panel Panel Size A10P8 A10P8AL 8. x x 102 A10P8 A10P8AL 8. x x 102 A12P10 A12P10AL 10. x x 226 A12P10 A12P10AL 10. x x 226 A1P12 A1P12AL 12. x x 276 A1P12 A1P12AL 12. x x 276 A16P1 A16P1AL 1. x x 27 A16P1 A16P1AL 1. x x 27 A18P16 A18P16AL 16. x 1.88 x 78 A18P16 A18P16AL 16. x 1.88 x 78 EQUIPMENT PROTECTION PH FAX pentairprotect.com 1

23 Fiberglass Overlapping Cover Raised Cover with Latches, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E5 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E5 Enclosure flammability per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No : Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Enclosures feature a raised, hinged, overlapping cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with solid and window covers. Latches provide easy access and security. SPECIFICATIONS compression-molded fiberglass construction overlapping raised solid- and window-covers Windows are clear polycarbonate cover fastens with padlockable Type 16 stainless steel latches type 0 stainless steel piano hinges integral mounting brackets enclosures protect equipment and operators from indirect electrical contact material is halogen free FINISH Fiberglass material is RAL 705 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ Standard Product Catalog Number AxBxC No. of Latches Window Size M x N D F G RHJB8HWPL1LG 9.70 x 7.71 x x x 196 x 0 20 x RHJB1HWPL2LG x 9.69 x x x 26 x 6 x RHJB112HWPL2LG 1.62 x x x x 295 x x RHJB161HWPL2LG.62 x 1.62 x x x 6 x x RHJ8HWPL1LG 9.70 x 7.71 x x 196 x RHJ1HWPL2LG x 9.69 x x 26 x RHJ112HWPL2LG 1.62 x x x 295 x RHJ161HWPL2LG.62 x 1.62 x x 6 x RHJ1816HWPL2LG 17.8 x.77 x x 00 x A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. H I J K L P Q W SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

24 Fiberglass Overlapping Cover Panels Enclosure Catalog Number Steel Panel Aluminum Panel Panel Size RHJB8HWPL1LG A10P8 A10P8AL 8. x x 102 RHJB1HWPL2LG A12P10 A12P10AL 10. x x 226 RHJB112HWPL2LG A1P12 A1P12AL 12. x x 276 RHJB161HWPL2LG A16P1 A16P1AL 1. x x 27 RHJ8HWPL1LG A10P8 A10P8AL 8. x x 102 RHJ1HWPL2LG A12P10 A12P10AL 10. x x 226 RHJ112HWPL2LG A1P12 A1P12AL 12. x x 276 RHJ161HWPL2LG A16P1 A16P1AL 1. x x 27 RHJ1816HWPL2LG A18P16 A18P16AL 16. x 1.88 x 78 EQUIPMENT PROTECTION PH FAX pentairprotect.com

25 Fiberglass Overlapping Cover Flat Cover with Screws, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E5 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E5 Enclosure flammability per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No : Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Enclosures feature a flat, overlapping cover design that ensures a more-secure seal. Available with removable and hinged covers for application flexibility. SPECIFICATIONS compression-molded fiberglass construction overlapping flat, solid-covers cover fastens with screws type 0 stainless steel piano hinges on hinged models integral mounting brackets enclosures protect equipment and operators from indirect electrical contact material is halogen free FINISH Standard fiberglass material finish is RAL 705 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview Bulletin: HJ SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

26 Fiberglass Overlapping Cover Standard Product Catalog Number AxBxC Door Fasteners D F G H I J HJ606HWLG 5.71 x 5.72 x.05 Hinged, x x 10 2 screws HJ606WLG 5.71 x 5.72 x.05 screws x x HJ806HWLG 7.71 x 5.72 x.05 Hinged, x x 10 2 screws HJ806WLG 7.71 x 5.72 x.05 screws x x HJ8HWLG 9.71 x 7.21 x.0 Hinged, x 196 x screws HJ8WLG 9.71 x 7.21 x.0 screws x 196 x HJ1HWLG x 9.69 x.62 Hinged, x 26 x screws HJ1WLG x 9.69 x.62 screws x 26 x HJ112HWLG 1.81 x x 5.99 Hinged, x 00 x 2 2 screws HJ112WLG 1.81 x x 5.99 screws x 00 x HJ161HWLG.81 x 1.81 x 5.99 Hinged, x 51 x 2 2 screws HJ161WLG.81 x 1.81 x 5.99 screws x 51 x HJ1816HWLG x.81 x 8.86 Hinged, x 02 x 2 2 screws HJ1816WLG x.81 x 8.86 screws x 02 x A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. K L P Q W Steel Panel Aluminum Panel Panel Size A6P6 A6P6AL.88 x x 12 A6P6 A6P6AL.88 x x 12 A8P6 A8P6AL 6. x x 12 A8P6 A8P6AL 6. x x 12 A10P8 A10P8AL 8. x x 102 A10P8 A10P8AL 8. x x 102 A12P10 A12P10AL 10. x x 226 A12P10 A12P10AL 10. x x 226 A1P12 A1P12AL 12. x x 276 A1P12 A1P12AL 12. x x 276 A16P1 A16P1AL 1. x x 27 A16P1 A16P1AL 1. x x 27 A18P16 A18P16AL 16. x 1.88 x 78 A18P16 A18P16AL 16. x 1.88 x 78 EQUIPMENT PROTECTION PH FAX pentairprotect.com 5

27 Fiberglass Overlapping Cover Flat Cover with Latches, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E5 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E5 Enclosure flammability per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No : Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Enclosures feature a flat, overlapping cover design that ensures a more-secure seal. Available with solid and window covers. Latches provide easy access and security. SPECIFICATIONS compression-molded fiberglass construction overlapping solid- and window-cover models are available Windows are clear polycarbonate cover fastens with padlockable Type 16 stainless steel latches type 0 stainless steel piano hinges integral mounting brackets enclosures protect equipment and operators from indirect electrical contact material is halogen free FINISH Standard fiberglass material is RAL 705 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ 6 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

28 Fiberglass Overlapping Cover Standard Product Catalog Number AxBxC No. of Latches Window Size M x N D F G H I HJ606HWPL1LG 5.71 x 5.72 x x x HJ806HWPL1LG 7.71 x 5.72 x x x HJ8HWPL1LG 9.71 x 7.21 x x 196 x HJ1HWPL2LG x 9.69 x x 26 x HJ112HWPL2LG 1.81 x x x 00 x HJ161HWPL2LG.81 x 1.81 x x 51 x HJ1816HWPL2LG x.81 x x 02 x HJB606HWPL1LG 5.71 x 5.72 x x x x x HJB806HWPL1LG 7.71 x 5.72 x x x x 10 2 x HJB8HWPL1LG 9.71 x 7.21 x x x 196 x x HJB1HWPL2LG x 9.69 x x x 26 x 117 x HJB112HWPL2LG 1.81 x x x x 00 x 2 05 x HJB161HWPL2LG.81 x 1.81 x x x 51 x 2 56 x HJB1816HWPL2LG x.81 x x x 02 x 2 06 x A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. J K L P Q W Steel Panel Aluminum Panel Panel Size A6P6 A6P6AL.88 x x 12 A8P6 A8P6AL 6. x x 12 A10P8 A10P8AL 8. x x 102 A12P10 A12P10AL 10. x x 226 A1P12 A1P12AL 12. x x 276 A16P1 A16P1AL 1. x x 27 A18P16 A18P16AL 16. x 1.88 x 78 A6P6 A6P6AL.88 x x 12 A8P6 A8P6AL 6. x x 12 A10P8 A10P8AL 8. x x 102 A12P10 A12P10AL x x 226 A1P12 A1P12AL 12. x x 276 A16P1 A16P1AL 1. x x 27 A18P16 A18P16AL 16. x 1.88 x 78 EQUIPMENT PROTECTION PH FAX pentairprotect.com 7

29 Fiberglass Overlapping Cover Flat Clear Cover with Latches, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E5 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E5 Enclosure flammability per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No : Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Enclosures feature a flat, overlapping clear cover design that ensures a more-secure seal and provides a larger viewing area than a traditional window. Latches provide easy access and security. SPECIFICATIONS compression-molded fiberglass construction clear polycarbonate viewing area cover fastens with padlockable Type 16 stainless steel latches type 0 stainless steel piano hinges integral mounting brackets enclosures protect equipment and operators from indirect electrical contact material is halogen free FINISH Standard fiberglass material is RAL 705 light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels for Junction Boxes Swing-Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: HJ Standard Product Catalog Number AxBxC No. of Latches Window Size N x M D F G H I CHJ606HWPL1LG 5.71 x 5.72 x x x x 10 2 x CHJ806HWPL1LG 7.71 x 5.72 x x x x x CHJ8HWPL1LG 9.71 x 7.21 x x x 196 x 109 x CHJ1HWPL2LG x 9.69 x x x 26 x x CHJ112HWPL2LG 1.81 x x x x 00 x 2 56 x CHJ161HWPL2LG.81 x 1.81 x x x 51 x 2 06 x CHJ1816HWPL2LG x.81 x x x 02 x 2 57 x A x B x C are internal dimensions. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. J K L P Q W Steel Panel Aluminum Panel Panel Size A6P6 A6P6AL.88 x x 12 A8P6 A8P6AL 6. x x 12 A10P8 A10P8AL 8. x x 102 A12P10 A12P10AL 10. x x 226 A1P12 A1P12AL 12. x x 276 A16P1 A16P1AL 1. x x 27 A18P16 A18P16AL 16. x 1.88 x 78 2 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

30 Fiberglass Overlapping Cover EQUIPMENT PROTECTION PH FAX pentairprotect.com 9

31 Fiberglass ULTRX ULTRX ULTRX, Type X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type, R,, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 CSA File No. 2186: Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of ULTRX fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. These enclosures feature hidden hinges, a padlocking capability for security, and flexible internal mounting options. SPECIFICATIONS compression-molded fiberglass material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties, including high-impact resistance Fiberglass is easily punched, drilled, filed or sawed Gasket assures water-tight and dust-tight seal enclosure may be rotated 180 degrees for left and right hinging molded-in drip shields are standard with each enclosure impact-resistant polycarbonate window is permanently bonded in place Fiberglass mounting brackets and stainless steel attachment screws are provided with each enclosure Unique hinge design allows for standard 180 degree door opening with a maximum opening of 270 degrees Door hinges are replaceable type 16 stainless steel quarter-turn latch. Optional keylocking or padlocking handle available. molded-in DIN bosses molded bosses on door provide additional mounting provisions integral mounting rails provide infinite panel adjustment front to back optional data pocket is high-impact thermoplastic material is halogen free FINISH Standard exterior surface painted light-gray acrylic enamel for enhanced UV protection. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. H2OMIT Vent Drains, Type X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Hole Seals Panels for Type R,, X, 12 and 1 Enclosures Rack Angles (Type RA) MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: UX1 Standard Product External Dimensions Catalog Number Door Style L x W UU50020 Solid 51 x x UU50020W Window 51 x x UU Solid 6 x x 2.09 UU606020W Window 6 x x 2.09 UU6050 Solid 6 x x UU6050W Window 6 x x UU5000 Solid 51 x x UU5000W Window 51 x x UU60600 Solid 6 x x 2.09 UU60600W Window 6 x x 2.09 UU600 Solid 7 x x 2.09 Internal Dimensions A x B x C 96 x 96 x x.59 x x 96 x x.59 x x 595 x x 2. x x 595 x x 2. x x 96 x x 19.5 x x 96 x x 19.5 x x 95 x x.55 x x 95 x x.55 x x 595 x x 2. x x 595 x x 2. x x 595 x x 2. x 12.6 Panel Size Panel Conductive Panel D x E A20P16 A20P16G 2 x x A20P16 A20P16G 9 x x A2P2 A2P2G 5 x x A2P2 A2P2G 5 x x A2P20 A2P20G 5 x x A2P20 A2P20G 5 x x A20P16 A20P16G 2 x x A20P16 A20P16G 2 x x A2P2 A2P2G 5 x x A2P2 A2P2G 5 x x A0P2 A0P2G 686 x x Mounting G x H 59 x x x x x x x x x x x x x x x x x x x x x x Window Size M x N 86 x x x x x x x x x x 19.1 F J K S T SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

32 Fiberglass ULTRX Catalog Number Door Style External Dimensions L x W Internal Dimensions A x B x C Panel Conductive Panel Panel Size D x E Mounting G x H Window Size M x N F J K S T UU600W Window 7 x x x 595 x x 2. x 12.6 A0P2 A0P2G 686 x x x x x 86 2 x UU800 Solid 10 x x x 808 x x 1.81 x 12.6 A0P0 A0P0G 90 x x x x UU800W Window 10 x x x 808 x x 1.81 x 12.6 A0P0 A0P0G 90 x x x x x x UU60600 Solid 6 x x x 595 x x 2. x A2P2 A2P2G 5 x x x x UU60600W Window 6 x x x 595 x x 2. x A2P2 A2P2G 5 x x x x x x UU600 Solid 7 x x x 595 x x 2. x A0P2 A0P2G 686 x x x x UU600W Window 7 x x x 595 x x 2. x A0P2 A0P2G 686 x x x x x 86 2 x Purchase panels separately. Note: When installing enclosures in a right-hand hinge application that involves vibration, Hoffman recommends the use of pad-locking or key-locking quarter-turn latch accessories for door securement (UUHPL, UUHKL). EQUIPMENT PROTECTION PH FAX pentairprotect.com 261

33 Fiberglass ULTRX ULTRX WiFi, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability rating per UL 508 Window flammability rating per UL 508 NEMA/EEMAC Type, X, 12, 1 CSA File No. LR2186: Type,X, 12, 1 IEC 60529, IP66 Cabinets with solid doors are plenum rated. Standard Product Catalog Number AxBxC Door Type Internal Dimensions A x B x C DU60600P 608 x 595 x 21 Solid 608 x 595 x x 2. x x 2. x 12.6 DU60600WP 608 x 595 x x 2. x 12.6 Window 608 x 595 x x 2. x 12.6 Wood panel included with enclosure. Optional steel panels must be ordered separately. Window size applies to window door cabinets only. Panel Size D x E Panel A2P2WD 5 x x A2P2WD 5 x x APPLICATION Ideal for locations such as tunnels, floor vaults, marinas, outside walls or rooftops, the lightweight ULTRX fiberglass WiFi cabinet does not impede WiFi or WLAN signals and has optional rack angles that can be added to support 19-in. rack-mount equipment. FEATURES Fiberglass is easily punched, drilled, filed or sawed Gasket assures watertight and dusttight seal enclosure may be rotated 180 degrees for left and right hinging molded-in drip shields are standard with each enclosure Door opens 180 degrees replaceable breakaway hinges Keylocking handle standard molded-in DIN bosses molded bosses on door provide additional mounting provisions integral mounting rails provide infinite panel adjustment front to back optional data pocket is high-impact thermoplastic material is halogen free SPECIFICATIONS enclosure and door made of molded fiberglass polyester that resists chemicals and temperature change impact-resistant polycarbonate window is permanently bonded in place Fiberglass mounting brackets and stainless steel attachment screws are provided with each enclosure includes a /-in. plywood panel for mounting equipment FINISH Standard exterior surface painted light-gray acrylic enamel for enhanced UV protection. Bulletin: DWS12 Mounting G x H Window Size M x N 98 x 86 F J K P Q R S T 555 x x x x x x x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

34 Fiberglass ULTRX EQUIPMENT PROTECTION PH FAX pentairprotect.com 26

35 Fiberglass ULTRX Panel Bracket Kit Catalog Number Description Pkg. Qty. UUPB ULTRX Panel Bracket Kit Panel Bracket Kit is used with steel panels and permits panel adjustment from front to rear. Fits all ULTRX sizes. Mounts on integrally molded body rail. Brackets are plated steel. All mounting hardware is included. Note: Front mounting position is approximately mm/5.5 in. back on 00mm enclosures. Bulletin: UX1Y Swing-Out Panel Catalog Number Fits A x B L UU500SP 51 x x UU6050SP 6 x x UU6060SP 6 x x UU60SP 7 x x UU80SP 10 x x Use UU6060SP with DATACOM ULTRX Fiberglass Type X WiFi Cabinet. W Installs front-mounted panels in ULTRX fiberglass enclosures. The front-mounted swing panel complements window-door units and is suited for any application requiring a display of gauges, dials or any type of control equipment monitor. Made of 1 gauge plated steel. Easy installation; no drilling required. Fully adjustable front to rear. Panel and mounting hardware included. Note: Front mounting position is approximately mm/5.5 in. back on 00mm enclosures. Bulletin: UX1Y Grounding Device Grounding Device provides a means to attach a grounding conductor to an ULTRX Swing-Out Panel or Swing-Out Frame. Includes all installation hardware and instructions. Bulletin: UX1Y Catalog Number UUGK Description ULTRX Grounding Device 26 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

36 Fiberglass ULTRX Panels for Type R,, X, 12 and 1 Enclosures Steel panels are 12 gauge with a white finish. Panel mounting hardware is furnished with all enclosures which accept these panels. Bulletin: DWS12, PNLWM Flange Thickness T (in.) Flange Thickness T (mm) Panel Size Panel Size Number Catalog Number D x E (in.) D x E (mm) of Holes A20P x x 0 0 A2P x x 2 2 A2P x x 5 2 A2P2WD x x 5 A0P x x 5 2 A0P x x 77 Catalog number with WD is wood. Edge Flanges Rack Angles (Type RA) Catalog Number Fits A x B L N UURA x x UURA x x Use UURA6060 with DATACOM ULTRX Fiberglass Type X WiFi Cabinet. Rack Units Pkg. Qty Pairs of full-length rack-mounting angles are available for mounting 1- in. (8-mm) rack-mounted equipment. Type RA angles are 1 gauge steel with.281-in. (7-mm) diameter mounting holes, spaced per EIA standard RS-10-D (universal spacing). Use Clip Nut Package (AN102) to provide tapped holes at desired locations. Angles and mounting hardware are plated steel. Mounting hardware is furnished. Bulletin: UX1Y EQUIPMENT PROTECTION PH FAX pentairprotect.com 265

37 Fiberglass ULTRX Keylock Kit and Padlock Kit Keylock Kit or pushbutton-style Padlock Kit is easily inserted in latch hole to prevent unauthorized personnel from gaining access to enclosure contents. Each kit is fully assembled for easy installation in the field. Type 16 stainless steel construction. Bulletin: UX1Y Catalog Number Description UUHKL Keylock Kit UUHPL Padlock Kit UUHKL: Internal key components are not stainless steel. UUHPL: Handles maintain UL 508A, Type,, X and 12 when properly installed on a Hoffman enclosure. Set up for 1/-in. or /8-in. padlock. Swing Frame Catalog Number Fits A x B L UU6060SF 610 x x UU60SF 762 x x Use UU6060SF with DATACOM ULTRX Fiberglass Type X WiFi Cabinet. W Rack Units 11 1 Swing Frame provides 19-in. rack-mounting capabilities with U-Style (Type RA) mounting hole pattern. Quarter-turn latch has -degree swing. Adjustable mounting provision. 1 gauge plated steel. Includes mounting hardware. Swing frame maintains enclosure rating if properly installed in a Hoffman enclosure. Note: Front mounting position is approximately mm/5.5 in. back on 00mm enclosures. Bulletin: UX1Y Door Stop Kit Door Stop Kit limits door to -degree opening. Field installable on all sizes of ULTRX enclosures. Type 0 stainless steel construction. Bulletin: UX1Y Catalog Number UUDS Description Door Stop Kit 266 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

38 Fiberglass ULTRX ULTRX Key Insert Inserts can be substituted for the standard quarter-turn latch. Inserts are Type 16 stainless steel. Bulletin: UX1Y Catalog Number UULDB UULSC Insert Type Double-bit mm Screw driver slot ULTRX Mounting Bracket Kit Kit is field-installable. Corrosionresistant fiberglass material. Type 16 stainless steel mounting hardware is included. Four mounting brackets per kit. Bulletin: UX1Y Catalog Number Description Kit Qty. UUMF Mounting Bracket Kit Screw Insert Kit Brass threaded inserts (10-2) with plated screws. Used on door bosses and DIN bosses. Bulletin: UX1Y Catalog Number Description Kit Qty. UUMH2 Screw Insert Kit inserts and screws Self-Tapping Screws Plated screws (1/- x.88) mount panels and accessories to DIN bosses on back of enclosure. Bulletin: UX1Y Catalog Number Description Pkg. Qty. UUMH1 Self-Tapping Screws 10 EQUIPMENT PROTECTION PH FAX pentairprotect.com 267

39 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches Hinge-Cover with -Point Latch or Quick-Release Latches Hinge-Cover with -Point Latch or Quick-Release Latches, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, R,, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION A full range of modification options are available for wall-mount fiberglass enclosures, including variable depths to accommodate larger controls. These enclosures feature padlockable polyester latches, or Hoffman s exclusive POWERGLIDE Handle with -point latching, for ease of access with increased security. SPECIFICATIONS Fiberglass-reinforced material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties type 16L stainless steel padlocking POWERGLIDE Handle on -point latch versions assures security and a water-tight seal while still allowing convenient access Quick-release latch versions feature fiberglass-reinforced polyester latches with integral Type 16L stainless steel padlocking hasp Seams are sealed; no holes or knockouts enclosure may be rotated 180 degrees for left and right hinging molded-in angular sealing flange directs water away from gasket area Gasket assures water-tight and dust-tight seal Fiberglass material is easily punched, drilled, filed or sawed Data pocket is high-impact thermoplastic Plated steel collar studs for mounting optional panels and terminal block kits material is halogen free FINISH Standard fiberglass enclosure is gray inside and out. Handle is Type 16L stainless steel electropolished. Optional steel panels are painted white. Optional stainless steel, aluminum and composite panels available in select sizes. ACCESSORIES See also Accessories H2OMIT Thermoelectric Dehumidifier H2OMIT Vent Drains, Type X HOL-SEALERS Hole Seals Panels Stainless Steel Window Kits Terminal Block Kit Assembly Thermal Accessories MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17W, A17WM 268 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

40 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches Standard Product -Point Latch Panel Size Catalog Number AxBxC Panel Conductive Panel Height A2H6GQRLPPT 2. x 20. x 6.00 A2P20 A2P20G x x 51 x 2 5 x 2 A20H8GQRLPPT x 20. x 8.00 A20P20 A20P20G x x 51 x 20 2 x 2 A2H8GQRLPPT 2. x 20. x 8.00 A2P20 A2P20G x x 51 x 20 5 x 2 A2H208GQRLPPT 2.19 x 2.19 x 8.00 A2P2 A2P x x 61 x 20 5 x 5 A0H208GQRLPPT 0. x 2. x 8.00 A0P2 A0P2G x x 616 x x 5 A6H008GQRLPPT 6. x 0. x 8.00 A6P0 A6P0G.00 x x 768 x x 686 A2H2010GQRLPPT 2. x 20. x A2P20 A2P20G x x 51 x 5 x 2 A0HGQRLPPT 0. x 2. x A0P2 A0P2G x x 616 x 686 x 5 A2H212GQRLPPT 2.19 x 2.19 x A2P2 A2P2G x x 61 x 05 5 x 5 A0H212GQRLPPT 0. x 2. x A0P2 A0P2G x x 616 x x 5 A6H012GQRLPPT 6. x 0. x A6P0 A6P0G.00 x x 768 x x 686 Purchase panels separately. Optional stainless steel, composite and aluminum panels available for most sizes. See General Accessories. G x H.86 x x x x x x x x x x x x x x x x x x x x x x 610 EQUIPMENT PROTECTION PH FAX pentairprotect.com 269

41 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches Standard Product Quick-Release Latch Catalog Number AxBxC Panel Cond. Panel Panel Size A20H1606GQRLP x 16. x 6.00 A20P16 A20P16G x x 1 x 2 2 x 0 A20H6GQRLP x 20. x 6.00 A20P20 A20P20G x x 51 x 2 2 x 2 A2H6GQRLP 2. x 20. x 6.00 A2P20 A2P20G x x 51 x 2 5 x 2 A0H206GQRLP 0. x 2. x 6.00 A0P2 A0P2G x x 616 x x 5 A20H1608GQRLP x 16. x 8.00 A20P16 A20P16G x x 1 x 20 2 x 0 A20H8GQRLP x 20. x 8.00 A20P20 A20P20G x x 51 x 20 2 x 2 A2H8GQRLP 2. x 20. x 8.00 A2P20 A2P20G x x 51 x 20 5 x 2 A2H208GQRLP 2.19 x 2.19 x 8.00 A2P2 A2P2G x x 61 x 20 5 x 5 A0H208GQRLP 0. x 2. x 8.00 A0P2 A0P2G x x 616 x x 5 A6H008GQRLP 6. x 0. x 8.00 A6P0 A6P0G.00 x x 768 x x 686 A20H1610GQRLP x 16. x A20P16 A20P16G x x 1 x 2 x 0 A20H2010GQRLP x 20. x A20P20 A20P20G x x 51 x 2 x 2 A2H2010GQRLP 2. x 20. x A2P20 A2P20G x x 51 x 5 x 2 A0HGQRLP 0. x 2. x A0P2 A0P2G x x 616 x 686 x 5 A20H1612GQRLP x 16. x A20P16 A20P16G x x 1 x 05 2 x 0 A20H2012GQRLP x 20. x A20P20 A20P20G x x 51 x 05 2 x 2 A2H2012GQRLP 2. x 20. x A2P20 A2P20G x x 51 x 05 5 x 2 A2H212GQRLP 2.19 x 2.19 x A2P2 A2P2G x x 61 x 05 5 x 5 A0H212GQRLP 0. x 2. x A0P2 A0P2G x x 616 x x 5 A6H012GQRLP 6. x 0. x A6P0 A6P0G.00 x x 768 x x 686 A6H612GQRLP 6. x 6. x A6P6 A6P6G.00 x x 921 x x 88 A8H612GQRLP 8. x 6. x A8P6 A8P6G 5.00 x x 921 x x 88 A60H612GQRLP 6 x 6.1 x A60P6 A60P6G x x 922 x x 88 A2H2016GQRLP 2. x 20. x A2P20 A2P20G x x 51 x 06 5 x 2 A2H216GQRLP 2.19 x 2.19 x A2P2 A2P2G x x 61 x 06 5 x 5 A0H216GQRLP 0. x 2. x A0P2 A0P2G x x 616 x x 5 A8H616GQRLP 8. x 6. x A8P6 A8P6G 5.00 x x 921 x x 88 A60H616GQRLP 6 x 6.1 x A60P6 A60P6G x x 922 x x 88 A20H1620GQRLP x 16. x A20P16 A20P16G x x 1 x x 0 A20H2020GQRLP x 20. x A20P20 A20P20G x x 51 x x 2 A2H2020GQRLP 2. x 20. x A2P20 A2P20G x x 51 x x 2 A2H220GQRLP 2.19 x 2.19 x A2P2 A2P2G x x 61 x x 5 A0H220GQRLP 0. x 2. x A0P2 A0P2G x x 616 x x 5 A6H020GQRLP 6. x 0. x A6P0 A6P0G.00 x x 768 x x 686 A8H620GQRLP 8. x 6. x A8P6 A8P6G 5.00 x x 921 x x 88 A2H202GQRLP 2. x 20. x 2.00 A2P20 A2P20G x x 51 x x 2 A2H22GQRLP 2.19 x 2.19 x 2.00 A2P2 A2P2G x x 61 x x 5 A0H22GQRLP 0. x 2. x 2.00 A0P2 A0P2G x x 616 x x 5 Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. Mtg G x H x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 57 No. of Latches SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

42 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches EQUIPMENT PROTECTION PH FAX pentairprotect.com 271

43 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches 272 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

44 Fiberglass Hinge-Cover with -Point Latch or Quick-Release Latches Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 27

45 Fiberglass Wall-Mount Disconnect Wall-Mount Disconnect Fiberglass Disconnect, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No. 9; Type, R,, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION For effective and economical disconnect protection in the harshest corrosive environments, these enclosures provide secure door closure through the use of Type 0 stainless steel slotted quarterturn latches. SPECIFICATIONS Fiberglass-reinforced material has excellent temperature and chemical resistance qualities and exhibits outstanding physical properties Seams are sealed; no holes or knockouts Gasket assures water-tight and dust-tight seal Fiberglass material is easily drilled, filed or sawed Hinges are fiberglass-reinforced polyester Doors are secured with Type 0 stainless steel slotted quarterturn latches Data pocket is high-impact thermoplastic copper flashed steel collar studs for mounting optional panels and terminal block kits Holes provided in body for mounting disconnect operating handle and operating mechanism internal grounding provisions for quarter-turn latches includes bracket affixed to door for attaching disconnect door catch (interlock) and instructions for installing disconnects material is halogen free FINISH Standard fiberglass material is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. ACCESSORIES See also Accessories. Frameless Window Kit Panels for Type R,, X, 12 and 1 Enclosures Steel and Stainless Steel Window Kits Terminal Block Kit Assembly for Type, 12 and 1 Enclosures MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17WD Standard Product Catalog Number AxBxC Panel Conductive Panel Panel Size A20HS1610GQRLP x 16. x A20P16 A20P16G x x 1 x 2 x 0 A2HS8GQRLP 2. x 20. x 8.00 A2P20 A2P20G x x 51 x 20 5 x 2 A2HS208GQRLP 2.19 x 2.19 x 8.00 A2P2 A2P2G x x 61 x 20 5 x 5 A2HS212GQRLP 2.19 x 2.19 x A2P2 A2P2G x x 61 x 05 5 x 5 A0HS212GQRLP 0. x 2. x A0P2 A0P2G x x 616 x x 5 A6HS012GQRLP 6. x 0. x A6P0 A6P0G.00 x x 768 x x 686 A8HS612GQRLP 8. x 6. x A8P6 A8P6G 5.00 x x 921 x x 88 A60HS612GQRLP 60. x 6.1 x A60P6 A60P6G x.00 0 x 922 x x 88 Purchase panels separately. Optional stainless steel, composite and aluminum panels available for most sizes. See General Accessories. No additional C dimensions available. Mounting G x H x x.86 x x x x x x x x x x x x x x 762 Number of Latches SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

46 Fiberglass Wall-Mount Disconnect EQUIPMENT PROTECTION PH FAX pentairprotect.com 2

47 Fiberglass Wall-Mount Disconnect 276 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

48 Fiberglass Wall-Mount Disconnect Disconnect Mounting Space Disconnects will occupy space on panel shown in Disconnect Mounting Space Diagram. Wiring space W1 is available when disconnect is installed in the enclosure. E1 = 8.62 in. (219 mm) when A < 0.00 in. (768 mm) and C = 8.00 in. (20 mm), in. ( mm) or in. (05 mm) E1 = in. (295 mm) when A > 0.00 in. (768 mm) and C = in. (05 mm) W1 = Wiring Space. See Technical Information for wire bend space. Refer to National Electrical Code 5 article 0-10(b) for wiring space required for line side conductors to be connected to disconnect. Verify your application to determine whether wiring space is adequate. Consult disconnect manufacturer for F1 and G1 dimensions. EQUIPMENT PROTECTION PH FAX pentairprotect.com 277

49 Fiberglass Hazardous Location Hazardous Location ZONEX Terminal Enclosure INDUSTRY STANDARDS ATEX Directive 9/9/EC ATEX TUV 1 ATEX808U Ex e IIC Gb Ex ta IIIC Da IP66 EN EN EN Service temperature -50C to +C IECEx IECEx TUV U Ex e IIC Gb Ex ta IIIC Da IP66 IEC IEC IEC Service temperature -50C to +C Type, X, 12; File No. E61997 UL508A Listed cul Listed per CSA C22.2 No. 9; Type, X, 12; File No. E61997 NEMA / EEMAC Type, X, 12 IEC 60529, IP66 APPLICATION ZONEX Terminal Enclosure is ideal for field terminations in hazardous locations. The enclosure meets national and international standards and certifications. It can be used to protect equipment and terminations from corrosive contaminants while meeting rigorous demands. The cabinet is ideal for either panel- or din-mounted components. The enclosures meets ATEX Directives 9/9/EC and IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications. FEATURES compression-molded, high-impact strength, fiberglass body and cover cover includes recessed, retained, combination head (Straight blade, Phillips and Torx drive) M or M6 stainless steel Type 16 screws retained, continuous, high-temperature silicon gasket within a labyrinth seal between cover and body Durable and reusable, internal M or M6 stainless steel inserts for DIN- and Panel-mounting covered mounting screw provisions outside of gasketed area, sized M (#8) or M6 (¼-in.) mounting location dimensions are molded into the back side of the enclosure Panel mounting screws included, M or M6 SPECIFICATIONS compression-molded fiberglass with added agents to address static charge build-up High-impact strength as well as high temperature-rated increased Safety: Ex e applications optional panels are pre-plated steel, 1.5mm (16 ga.) thick; or 2mm composite FINISH molded material has a smooth, low-gloss, black finish cover screws are matte stainless steel finish ACCESSORIES Panels Din Rail Terminals NOTES Intrinsically safe terminal blocks can be installed through modification program to provide a populated enclosure. IECEx populated enclosures require IECEx certified components specifically listed in the approving Certification (see IECEx SIR 09.0 for more detail). MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Hoffman offers a ZONEX-specific modification program. Contact your local Hoffman Representative or Distributor for more information. Bulletin: HL 278 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

50 Fiberglass Hazardous Location Standard Product Catalog Number AxBxC EXE8055. x x x x 55 EXE x x x x 55 EXE x x x x 55 EXE5 7.8 x x x x 55 EXE80. x x 80 x x EXE110. x x 110 x x EXE x x 160 x x EXE1 7.8 x x 1 x x EXE x.72 x x x EXE x.72 x x x EXE x 6.0 x x 160 x EXE x 6.0 x x 160 x EXE x 6.0 x.5 60 x 160 x EXE x 6.0 x x 160 x EXE x 9.8 x.72 5 x x EXE00. x 9.8 x x x EXE0005. x.9 x x 05 x EXE x.9 x x 05 x 165 F G H I J Mounting Screw Size #8 #8 #8 #8 #8 #8 #8 #8 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 1/ 6 Panel Panel Material Panel Size A80P Composite 2.72 x 2.52 x x 6 x 2 A110P Composite. x 2.52 x x 6 x 2 A160P Composite 5.87 x 2.52 x x 6 x 2 A1P Composite 7.05 x 2.52 x x 6 x 2 A80P Composite 2.72 x 2.52 x x 6 x 2 A110P Composite. x 2.52 x x 6 x 2 A160P Composite 5.87 x 2.52 x x 6 x 2 A1P Composite 7.05 x 2.52 x x 6 x 2 A122P Plated Steel. x.21 x x 107 x 1.5 A220P Plated Steel 8.11 x.21 x x 107 x 1.5 A160160P Plated Steel 5.6 x 5.70 x.06 1 x 1 x 1.5 A260160P Plated Steel 9.61 x 5.70 x.06 2 x 1 x 1.5 A60160P Plated Steel 1.5 x 5.70 x.06 x 1 x 1.5 A560160P Plated Steel 21.8 x 5.70 x.06 5 x 1 x 2.5 A5P Plated Steel 9.5 x 9.17 x x 2 x 1.5 A00P Plated Steel.12 x 9.17 x.06 8 x 2 x 1.5 A0005P Plated Steel.16 x.5 x x x 1.5 A0005P Plated Steel.16 x.5 x x x 1.5 EQUIPMENT PROTECTION PH FAX pentairprotect.com 279

51 Fiberglass Free-Stand Free-Stand Free-Stand, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12; File No. E61997 cul Listed per CSA C22.2 No 9; Type, R,, X, 12; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA Type, R,, X, 12, 1 E.I.A. RS-10-D IEC 60529, IP66 Meets NEMA Type RX requirements APPLICATION An economical housing for corrosive environments, single-door, free-stand enclosures provide a versatile solution for applications that require flexibility when mounting panels and racks. Benefits include easy access to equipment, larger capacity for control systems, steel reinforcements for stability and strength, captivated door screws and an optional POWERGLIDE Handle for secure latching. SPECIFICATIONS Fiberglass-reinforced polyester material has excellent temperature and chemical resistance and exhibits outstanding physical properties Fiberglass material is easily punched, drilled, filed or sawed models have either a -point latching system with handle or stainless steel captivated door screws Gasket assures water-tight and dust-tight seal Painted steel top, bottom and side internal reinforcements standard; stainless steel corner reinforcements optional Heavy-duty Type 16 stainless steel lifting eyes Accessory mounting channels attached horizontally to interior body sides at top, bottom and center. Painted mounting channels standard; stainless steel optional. Panels and rack-mounting angles can be mounted anywhere along corner channels; panels can be mounted on sides or back Hinges are corrosion-resistant fiberglass with Type 16 stainless steel hinge pins Large, high-impact thermoplastic data pocket (12.00 x in. or 05 x 05 mm) is provided molded-in angular sealing flange directs water away from gasket area type 16 stainless steel POWERGLIDE Handle on handle versions material is halogen free FINISH Standard fiberglass enclosure is gray inside and out. Optional mild-steel panels are painted white. Optional conductive panels are available. ACCESSORIES See also Accessories. Accessory Selection for Free-Stand, Type X Floor Stand Kit H2OMIT Vent Drains, Type X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Hole Seals MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17 Standard Product Catalog Number AxBxC in. AxBxC mm Description Estimated Ship Wt. (lb.) Estimated Ship Wt. (kg) A72FGFS x.00 x x 65 x 622 Stainless steel captivated door screws A72FGFSPT x.00 x x 65 x 622 -point latching system/type 16 stainless steel handle SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

52 Fiberglass Free-Stand EQUIPMENT PROTECTION PH FAX pentairprotect.com 281

53 Fiberglass Free-Stand Accessory Selection for Free-Stand, Type X For details, see Accessories chapter. Bulletin: A17Y, A80, D10, PNL0, PNLFS Panels Catalog Number Description Size (in.) Size (mm) A72P2F1 Full Panel, Steel x x 508 A72P2F2 Half Panel, Steel 0.88 x x 508 A72P2F1G Full Panel, Conductive x x 508 A72P2F2G Half Panel, Conductive 0.88 x x 508 Purchase panels and accessories separately. Swing-Out Panels Catalog Number Description Size (in.) Size (mm) A72SP2F Full Swing-Out Panel x x 62 A72SP2F Half Swing-Out Panel 0.88 x x 62 Purchase panels and accessories separately. Half Swing-Out Panel fits in top or bottom half of enclosure. Side-Mounted Panels Catalog Number Description Size (in.) Size (mm) A72SMP inch (56mm) x x 56 Wide Panel, Steel A72SMP inch (508mm) Wide Panel, Steel x x 508 Catalog Number Description Size (in.) Size (mm) A72SMP1G 1.00 inch (56mm) x x 56 Wide Panel, Conductive A72SMP20G inch (508mm) Wide Panel, Conductive x x 508 Purchase panels and accessories separately. Clamping Nuts Catalog Number Description Package Qty APSCN 1/-20 Clamping Nut 20 APS51618CN 5/16-18 Clamping Nut 20 Purchase panels and accessories separately. Casters Catalog Number Description Size (in.) Size (mm) DMCKC Set of four casters.00 x x 76 Requires Bottom Support Purchase panels and accessories separately. Inside Bottom Support Catalog Number Description Size (in.) Size (mm) A17SUPPORT1 Enclosure bottom support allows installation of casters or floor-stand kits x x 591 Purchase panels and accessories separately. 282 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

54 Fiberglass Free-Stand Rack Mounting Accessory Selection for Free- Stand, Type X For details, see Accessories chapter. Screw Package Catalog Number Description Package Qty AS Truss Head Nickel-Plated 20 Purchase accessories separately. Bulletin: A80, P20 Rack Mounting Angles Catalog Number Description Length (in.) Length (mm) Units A72RP2F5 Two Full-Length Angles (Type RP) A72RP2F6 Two Half-Length Angles (Type RP) A60RA19TH Two Full-Length Angles (Type RA) A72RA19TH Two Full-Length Angles (Type RA Purchase accessories separately. 1 unit = 1. in. (mm) Clip Nut Package Catalog Number Description Package Qty Size AN102 #10-2 Zinc-Plated 20 Fits U-Style (Type RA) Rack Mounting Angle Purchase accessories separately. Rack Panels Catalog Number Description Size (in.) Size (mm) Units P19RP1UA Aluminum x 1. 8 x 1 P19RP1UP Steel x 1. 8 x 1 P19RP2UA Aluminum x.50 8 x 89 2 P19RP2UP Steel x.50 8 x 89 2 P19RPUA Aluminum x 5. 8 x 1 P19RPUP Steel x 5. 8 x 1 P19RPUA Aluminum x x 178 P19RPUP Steel x x 178 P19RP5UA Aluminum x 8. 8 x P19RP5UP Steel x 8. 8 x P19RP6UA Aluminum x x P19RP6UP Steel x x P19RP7UA Aluminum x x 11 7 P19RP7UP Steel x x 11 7 P19RP8UA Aluminum x x 56 8 P19RP8UP Steel x x 56 8 P19RP9UP Steel x. 8 x 00 9 P19RP10UP Steel x x 5 10 P19RP11UA Aluminum x x P19RP11UP Steel x x P19RP12UA Aluminum x x 5 12 P19RP12UP Steel x x 5 12 P19RP16UP Steel x x Purchase panels and accessories separately. 1 unit = 1. in. ( mm) Drawers Catalog Number Description Depth (in.) Depth (mm) Units A19DR2U Pull-Out Drawer A19DRU Pull-Out Drawer Purchase accessories separately. 1 unit = 1. in. ( mm) Requires two sets of Type RA Rack Mounting Angles for installation. Writing Surface for Drawers Catalog Number Description Size A19WSDR Hinged Surface Fits Drawer A19DR2U and A19DRU Purchase accessories separately. Shelves Catalog Number Description Units A19SHP6 Pull-Out Shelf 2 A19SH5 Fixed Shelf 1 A19SH6 Fixed Shelf 1 Purchase accessories separately. 1 unit = 1. in. ( mm) Guides Catalog Number Description Unit AG1U6 Chassis Guide (set of two) 1 Purchase accessories separately. 1 unit = 1. in. ( mm) EQUIPMENT PROTECTION PH FAX pentairprotect.com 28

55 Fiberglass Two-Door Free-Stand Two-Door Free-Stand Two-Door Free-Stand, Type X INDUSTRY STANDARDS UL 508A Listed; Type, R,, X, 12; File No. E61997 cul Listed per CSA C22.2 No 9; Type, R,, X, 12; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA Type, R,, X, 12, 1 IEC 60529, IP66 Meets NEMA Type RX requiremets APPLICATION An economical way to house electronics in corrosive environments, two-door enclosures provide easy access to equipment, larger capacity for control systems and steel reinforcements that ensure stability and strength. These enclosures feature captivated door screws and an optional POWERGLIDE Handle for secure latching. SPECIFICATIONS Fiberglass-reinforced polyester material has excellent temperature and chemical resistance and exhibits outstanding physical properties Seams are sealed; no holes or knockouts Fiberglass material is easily punched, drilled, filed or sawed models have either a -point latching system with handle or stainless steel captivated door screws type 16 stainless steel POWERGLIDE Handle on handle versions Stainless steel captivated door screws on screw versions Gasket assures a water-tight and dust-tight seal Painted steel top, bottom and side internal reinforcements standard; stainless steel corner reinforcements optional Solid centerpost (not removable) has heavy-gauge stiffener Heavy-duty Type 16 stainless steel lifting eyes Hinges are corrosion-resistant fiberglass with Type 16 stainless steel hinge pins Large data pocket (12.00 x in. or 05 x 05 mm) is highimpact thermoplastic molded-in angular sealing flange directs water away from gasket area material is halogen free FINISH Standard fiberglass enclosure is gray inside and out. White painted mild steel panels are included. Optional conductive panels are available. ACCESSORIES See also Accessories. Accessory Selection for Free-Stand, Type X Bottom Support Kits Floor Stand Kit H2OMIT Vent Drains, Type X H2OMIT Thermoelectric Dehumidifier HOL-SEALERS Hole Seals MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: A17 Standard Product Catalog Number AxBxC Number of Panels Panel Size A729FG x 9.00 x x 1 x x x 559 A729FGFSPT x 9.00 x x 1 x x x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

56 Fiberglass Two-Door Free-Stand Bottom Support Kits Bulletin: A17Y Catalog Number Description A17SUPPORT2 Inside Bottom Support -- Enclosure bottom support to allow option of installing casters or floor stand kits A17UNISTRUT Bolt-On Unistrut Channel (8 channels) -- Painted steel unistrut for accessory mounting A17SUPPORT2 required to install A17UNISTRUT in two-door enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 285

57 Polycarbonate and ABS QLINE D Polycarbonate and ABS QLINE D QLINE D Pushbutton, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12 CSA File Number 2186: Type, X, 12 IEC 60529, IP67 APPLICATION Used for insulating and housing 0.5-mm or 22.5-mm pushbuttons in hostile environments, QLINE D Enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. SPECIFICATIONS High-impact polycarbonate material is used for both body and cover Polycarbonate material is easily punched, drilled, filed or sawed Straight side walls permit ganging of multiple enclosures cross-point captivated cover screws are stainless steel mounting holes molded directly adjacent to cover screws cover screws protected by removable caps that are both aesthetic and provide tamper resistance molded internal pads for mounting optional panels, rails or other components Seamless foam-in-place gasket assures water-tight and dusttight seal Screws provided for mounting optional panel mounting hardware furnished material is halogen free FINISH Polycarbonate enclosure material is RAL 705 light-gray inside and out. Optional panels are unpainted plated steel. ACCESSORIES See also Accessories. Hardware Kit Hinge Kit Mounting Bracket Kit Bulletin: Q1 Standard Product Catalog Number AxBxC Q1PBPCD x 7 x 79 x 2.87 x.11 Q1PBPCDM x 7 x 79 x 2.87 x.11 Q2PBPCD 11 x 7 x 79.5 x 2.87 x.11 Q2PBPCDM 11 x 7 x 79.5 x 2.87 x.11 QPBPCD x 7 x x 2.87 x.11 QPBPCDM x 7 x x 2.87 x.11 QPBPCD 19 x 11 x x.5 x.11 QPBPCDM 19 x 11 x x.5 x.11 Q6PBPCD 2 x x x 6.02 x.29 A x B x C are internal dimensions. Purchase panels separately. Hole Size External Dimensions L x W x 80.2 x x 80.2 x. 0.5 x x x x x x x x. 0.5 x x x x x x 6.0 Panel Size D x E Panel Q88PD 68 x x 2.17 Q88PD 68 x x 2.17 Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q168PD 11 x x 2.56 Q168PD 11 x x 2.56 Q2012PD 170 x 6.69 x.9 Q2012PD 170 x 6.69 x.9 Q216PD 211 x x 5.8 Mounting G x H 70 x x x x x 50. x x 50. x x x x x x 7.0 x x 7.0 x x x 5.12 F J P Q R S U 0.16 X Y Z SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

58 Polycarbonate and ABS QLINE D EQUIPMENT PROTECTION PH FAX pentairprotect.com 287

59 Polycarbonate and ABS QLINE D QLINE D, Type X INDUSTRY STANDARDS Polycarbonate Enclosure UL 508A Listed; Type, X, 6, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 6, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 6, 12, 1 CSA File No. 2186: Type, X, 6, 12, 1 IEC 60529, IP67 ABS Enclosure NEMA/EEMAC Type, X, 6, 12, 1 IEC 60529, IP67 APPLICATION QLINE D polycarbonate and ABS enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. Tough as well as stylish, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-ul rated alternative. SPECIFICATIONS Body is impact-resistant polycarbonate for PCD series and ABS for ABD series opaque and clear covers are impact-resistant polycarbonate for PCD series and ABS for ABD series Polycarbonate material is easily punched, drilled, filed or sawed Straight side walls permit ganging of multiple enclosures cross-point captivated cover screws are stainless steel mounting holes molded directly adjacent to cover screws cover screws protected by removable caps that are aesthetic and provide tamper resistance molded internal pads for mounting optional panels, rails and other components Panel mounting feature on both body and cover Seamless foam-in-place gasket assures water-tight and dusttight seal Screws provided for mounting optional panel material is halogen free FINISH Polycarbonate and ABS enclosures are light-gray (RAL 705) inside and out. Optional panels are plated steel. ACCESSORIES See also Accessories. Hardware Kit Hinge Kit HOL-SEALERS Hole Seals Mounting Bracket Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q1 288 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

60 Polycarbonate and ABS QLINE D Standard Product Polycarbonate External Dimensions Catalog Number AxBxC Cover Style L x W Q55PCD 5 x 55 x 6 Opaque 55 x x 2.17 x x 2.09 Q55PCDCC 5 x 55 x 6 Clear 55 x x 2.17 x x 2.09 Q886PCD 76 x 7 x 9 Opaque 82 x x 2.89 x x. Q886PCDCC 76 x 7 x 9 Clear 82 x x 2.89 x x. Q1286PCD 11 x 7 x 9 Opaque x 80.7 x 2.89 x x. Q1286PCDCC 11 x 7 x 9 Clear x 80.7 x 2.89 x x. Q1686PCD x 7 x 9 Opaque 160 x x 2.89 x x. Q1686PCDCC x 7 x 9 Clear 160 x x 2.89 x x. Q12126PCD x 122 x 56 Opaque 122 x.72 x.80 x x.72 Q12126PCDCC x 122 x 56 Clear 122 x.72 x.80 x x.72 Q208PCD 0 x x 76 Opaque x 0 x x 2.99 x Q208PCDCC 0 x x 76 Clear x 0 x x 2.99 x Q889PCD 80 x 82 x 86 Opaque 82 x 80. x.2 x.9.2 x. Q889PCDCC 80 x 82 x 86 Clear 82 x 80. x.2 x.9.2 x. Q1289PCD 11 x 7 x 79 Opaque x 80.5 x 2.87 x x. Q1289PCDCC 11 x 7 x 79 Clear x 80.5 x 2.87 x x. Q1689PCD 11 x 7 x 79 Opaque 160 x 80.5 x 2.87 x x. Q1689PCDCC 11 x 7 x 79 Clear 160 x 80.5 x 2.87 x x. Q12129PCD x 122 x 86 Opaque 122 x.72 x.80 x.9.80 x.72 Q12129PCDCC x 122 x 86 Clear 122 x.72 x.80 x.9.80 x.72 Q20129PCD 19 x 11 x 79 Opaque x 7.60 x.5 x.11 x.72 Q20129PCDCC 19 x 11 x 79 Clear x 7.60 x.5 x.11 x.72 Q029PCD 29 x 22 x 79 Opaque 00 x x 8.78 x x 9.05 Q029PCDCC 20 x 00 x 86 Clear 00 x x x x 9.05 Q16129PCD x 11 x 8 Opaque 160 x 6.02 x.5 x x.72 Q16129PCDCC x 11 x 8 Clear 160 x 6.02 x.5 x x.72 Q2169PCD 2 x x 8 Opaque 20 x x 6.02 x x 6.0 Q2169PCDCC 2 x x 8 Clear 20 x x 6.02 x x 6.0 Q0211PCD 20 x 00 x 111 Opaque 00 x x x x 9.06 Q0211PCDCC 20 x 00 x 111 Clear 00 x x x x 9.06 Q21612PCD 160 x 20 x 121 Opaque 20 x x 9.5 x x 6.0 Q21612PCDCC 160 x 20 x 121 Clear 20 x x 9.5 x x 6.0 A x B x C are internal dimensions. Purchase panels separately. Panel Size D x E Panel Q88PD 68 x x 2.17 Q88PD 68 x x 2.17 Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q168PD 11 x x 2.56 Q168PD 11 x x 2.56 Q1212PD 105 x 9.1 x.66 Q1212PD 105 x 9.1 x.66 Q20PD 170 x x 5.0 Q20PD 170 x x 5.0 Q88PD 68 x x 2.17 Q88PD 68 x x 2.17 Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q168PD 11 x x 2.56 Q168PD 11 x x 2.56 Q1212PD 105 x 9.1 x.66 Q1212PD 105 x 9.1 x.66 Q2012PD 170 x 6.69 x.9 Q2012PD 170 x 6.69 x.9 Q02PD 265 x 10. x 8.27 Q02PD 265 x 10. x 8.27 Q1612PD 10 x 5.12 x.9 Q1612PD 10 x 5.12 x.9 Q216PD 211 x x 5.8 Q216PD 211 x x 5.8 Q02PD 265 x 10. x 8.27 Q02PD 265 x 10. x 8.27 Q216PD 211 x x 5.8 Q216PD 211 x x 5.8 Mounting G x H x x 1.61 x x x x x x x 50. x x 50. x x x x x x. x x. x x 7.0 x x 7.0 x x x x x x 50. x x 50. x x x x x x. x x. x x 7.0 x x 7.0 x x 11. x 288 x 11. x 18 x 5.8 x.5 18 x 5.8 x x x x x x 11. x 288 x 11. x 228 x x x x 5.12 F J K P Q R S U EQUIPMENT PROTECTION PH FAX pentairprotect.com 289

61 Polycarbonate and ABS QLINE D Standard Product ABS Catalog Number AxBxC Q55ABD 5 x 55 x x 2.17 x 1.2 Q55ABDCC 5 x 55 x x 2.17 x 1.2 Q886ABD 80 x 82 x 56. x.2 x 2.20 Q886ABDCC 80 x 82 x 56. x.2 x 2.20 Q1286ABD 80 x x 56. x.72 x 2.20 Q1286ABDCC 80 x x 56. x.72 x 2.20 Q1686ABD 80 x 160 x 56. x 6.0 x 2.20 Q1686ABDCC 80 x 160 x 56. x 6.0 x 2.20 Q12126ABD x 122 x x.80 x 2.20 Q12126ABDCC x 122 x x.80 x 2.20 Q208ABD 0 x x 76 x x 2.99 Q208ABDCC 0 x x 76 x x 2.99 Q889ABD 80 x 82 x 86. x.2 x.9 Q889ABDCC 80 x 82 x 86. x.2 x.9 Q1289ABD 80 x x 86. x.72 x.9 Q1289ABDCC 80 x x 86. x.72 x.9 Q1689ABD 80 x 160 x 86. x 6.0 x.9 Q1689ABDCC 80 x 160 x 86. x 6.0 x.9 Q12129ABD x 122 x x.80 x.9 Q12129ABDCC x 122 x x.80 x.9 Q20129ABD x x x x.9 Q20129ABDCC x x x x.9 Q029ABD 20 x 00 x x x.9 Q029ABDCC 20 x 00 x x x.9 Q16129ABD x 160 x x 6.0 x. Q16129ABDCC x 160 x x 6.0 x. Q2169ABD 160 x 20 x x 9.5 x. Q2169ABDCC 2 x x x 6.02 x.1 Q0211ABD 20 x 00 x x x.7 Q0211ABDCC 20 x 00 x x x.7 Q21612ABD 160 x 20 x x 9.5 x.76 Q21612ABDCC 160 x 20 x x 9.5 x.76 External Dimensions Cover L x W Style Opaque 55 x x 2.09 Clear 55 x x 2.09 Opaque 82 x 80.2 x. Clear 82 x 80.2 x. Opaque x x. Clear x x. Opaque 160 x x. Clear 160 x x. Opaque 122 x.80 x.72 Clear 122 x.80 x.72 Opaque x 0 x Clear x 0 x Opaque 82 x 80.2 x. Clear 82 x 80.2 x. Opaque x x. Clear x x. Opaque 160 x x. Clear 160 x x. Opaque 122 x.80 x.72 Clear 122 x.80 x.72 Opaque x x.72 Clear x x.72 Opaque 00 x x 9.05 Clear 00 x x 9.05 Opaque 160 x 6.0 x.72 Clear 160 x 6.0 x.72 Opaque 20 x x 6.0 Clear 20 x x 6.0 Opaque 00 x x 9.06 Clear 00 x x 9.06 Opaque 20 x x 6.0 Clear 20 x x 6.0 Panel Size D x E Panel Q88PD 68 x x 2.17 Q88PD 68 x x 2.17 Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q168PD 11 x x 2.56 Q168PD 11 x x 2.56 Q1212PD 105 x 9.1 x.66 Q1212PD 105 x 9.1 x.66 Q20PD 170 x x 5.0 Q20PD 170 x x 5.0 Q88PD 68 x x 2.17 Q88PD 68 x x 2.17 Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q168PD 11 x x 2.56 Q168PD 11 x x 2.56 Q1212PD 105 x 9.1 x.66 Q1212PD 105 x 9.1 x.66 Q2012PD 170 x 6.69 x.9 Q2012PD 170 x 6.69 x.9 Q02PD 265 x 10. x 8.27 Q02PD 265 x 10. x 8.27 Q1612PD 10 x 5.12 x.9 Q1612PD 10 x 5.12 x.9 Q216PD 211 x x 5.8 Q216PD 211 x x 5.8 Q02PD 265 x 10. x 8.27 Q02PD 265 x 10. x 8.27 Q216PD 211 x x 5.8 Q216PD 211 x x 5.8 Mtg. G x H x x 1.61 x x x x x x x 50. x x 50. x x x x x x. x x. x x 7.0 x x 7.0 x x x x x x 50. x x 50. x x x x x x. x x. x x 7.0 x x 7.0 x x 11. x 288 x 11. x 18 x 5.8 x.5 18 x 5.8 x x x x x x 11. x 288 x 11. x 228 x x x x 5.12 F J K P Q R S U SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

62 Polycarbonate and ABS QLINE D EQUIPMENT PROTECTION PH FAX pentairprotect.com 291

63 Polycarbonate and ABS QLINE D Hinge Kit Hinge Kit includes two polyamide hinges, eight M self-tapping, plated screws, eight flat washers and drilling templates. Use on all QLINE D enclosures. Hinge Kit meets Type requirements. Bulletin: Q1Y Catalog Number QDEHK Mounting Bracket Kit Mounting Bracket Kit has four polycarbonate brackets and four M self-tapping, plated screws. Kit is field-installable. Use on all QLINE D enclosures. Maintains listed ratings for enclosure. Bulletin: Q1Y Catalog Number QDMFK Hardware Kit Hardware Kit includes six selftapping, stainless steel cover screws, four self-tapping plated panel screws and six removable plastic caps that fit over the screws to provide tamper resistance as well as a clean aesthetic appearance. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Bulletin: Q1Y Catalog Number QDHK Panels Bulletin: Q1Y Panel Size D x E Catalog Number Q88PD 65 x x 2.17 Q128PD 9 x x 2.56 Q168PD 1 x x 2.56 Q1212PD 105 x 95.1 x.7 Q1612PD 12 x x.1 Q2012PD 172 x x.1 Q20PD 172 x x 5.2 Q216PD 21 x 8.8 x 5.71 Q02PD 285 x x 8.27 Mounting G x H x x 82 x x 121 x x 98 x 8.86 x x 6.0 x x 6.0 x x x x x 5. 5 x x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

64 Polycarbonate and ABS QLINE D Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 29

65 Polycarbonate and ABS QLINE D QLINE D, EMC, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 IEC 60529, IP66 Standard Product Catalog Number AxBxC Q1286PCEMC x 80 x x. x 2.17 Q1289PCEMC x 80 x x. x.5 Q16129PCEMC 160 x x 6.0 x.72 x.5 Q1689PCEMC 160 x 80 x x. x.5 Q20129PCEMC x x 85 x.72 x.5 Q2169PCEMC 20 x 160 x 9.5 x 6.0 x.5 Purchase panels separately. External Dimensions L x W x x. x x. 160 x 6.0 x x x. x x x x 6.0 Internal Dimensions A x B x C 11 x 7 x 9.7 x 2.89 x x 7 x 79.5 x 2.87 x.11 x 11 x x.5 x.29 x 7 x x 2.87 x x 11 x x.5 x.11 2 x x x 6.02 x.29 Panel Size D x E Panel Q128PD 91 x 65. x 2.56 Q128PD 91 x 65. x 2.56 Q1612PD 10 x 5.12 x.9 Q168PD 11 x x 2.56 Q2012PD 170 x 6.69 x.9 Q216PD 211 x x 5.8 APPLICATION QLINE D polycarbonate EMC enclosures have contoured bodies and flush cover screws for an attractive, contemporary appearance while also providing EMC protection in corrosive environments. SPECIFICATIONS Body is impact-resistant polycarbonate emc conductive coating in base and cover Gasket of silver/silicone mounting holes molded directly under cover screws cross-point captivated cover screws are stainless steel mounting tracks along body side walls and bosses on cover for PC card installation cover screws protected by removable caps that are both aesthetic and provide tamper resistance molded internal pads for mounting optional panels, rails and other components Screws provided for mounting optional panel FINISH Enclosure material is RAL 705 light-gray outside. Optional panels are conductive steel. Bulletin: Q1EM Mounting G x H 108 x 50. x x 50. x x 5.8 x.5 18 x x x 7.0 x x x 5.12 F J K P Q R S U SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

66 Polycarbonate and ABS QLINE D EQUIPMENT PROTECTION PH FAX pentairprotect.com 295

67 Polycarbonate and ABS QLINE E QLINE E QLINE E, Type X INDUSTRY STANDARDS Polycarbonate Enclosure UL 508A Listed; Type, X, 6, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 6, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 6, 12, 1 CSA File No. 2186: Type, X, 12, 1 IEC 60529, IP67 ABS Enclosure NEMA/EEMAC Type, X, 6, 12, 1 IEC 60529, IP67 APPLICATION QLINE E Enclosures house larger controls, provide additional sizerange options and offer greater internal mounting flexibility than smaller QLINE products. Featuring contoured bodies with flush cover screws, they are functional in corrosive environments and can withstand occasional submersion. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-ul rated alternative. SPECIFICATIONS Body is impact-resistant polycarbonate for PCE series and ABS for ABE series opaque and clear covers are impact-resistant polycarbonate for PCE, opaque covers are ABS for ABE series Polycarbonate and ABS material is easily punched, drilled, filed or sawed cross-point flush cover screws are strong, durable polyamide cover includes a molded-in wire lead hole mounting tracks along body side walls for PC card installation molded internal pads for mounting optional panels, rails and other components Seamless foam-in-place gasket assures water-tight and dusttight seal material is halogen free FINISH Polycarbonate and ABS enclosure material is RAL 705 light-gray inside and out. Optional panels are plated steel. ACCESSORIES See also Accessories. Brass Inserts Hardware Kit Hinge Kit HOL-SEALERS Hole Seals Mounting Bracket Kit MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q1 296 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

68 Polycarbonate and ABS QLINE E Standard Product Polycarbonate Catalog Number AxBxC Q188PCE 119 x 69 x x 2.72 x 2.6 Q188PCECC 119 x 69 x x 2.70 x 2.65 Q118PCE 119 x 119 x x.67 x 2.65 Q118PCECC 119 x 119 x x.67 x 2.65 Q1818PCE 169 x 119 x x.67 x 2.65 Q1818PCECC 169 x 119 x x.67 x 2.65 Q18188PCE 169 x 169 x x 6.6 x 2.65 Q18188PCECC 169 x 169 x x 6.6 x 2.65 Q188PCE 2 x 169 x x 6.6 x 2.65 Q188PCECC 2 x 169 x x 6.6 x 2.65 Q1810PCE 119 x 69 x x 2.70 x.6 Q1810PCECC 119 x 69 x x 2.70 x.6 Q1110PCE 119 x 119 x x.67 x.6 Q1110PCECC 119 x 119 x x.67 x.6 Q18110PCE 169 x 119 x x.67 x.6 Q18110PCECC 169 x 119 x x.67 x.6 Q181810PCE 169 x 169 x x 6.6 x.6 Q181810PCECC 169 x 169 x x 6.6 x.6 Q1810PCE 2 x 169 x x 6.6 x.6 Q1810PCECC 2 x 169 x x 6.6 x.6 Q181PCE 119 x 69 x x 2.70 x.62 Q181PCECC 119 x 69 x x 2.70 x.62 Q111PCE 119 x 119 x x.67 x.62 Q111PCECC 119 x 119 x x.67 x.62 Q1811PCE 169 x 119 x x.67 x.62 Q1811PCECC 169 x 119 x x.67 x.62 Q18181PCE 169 x 169 x x 6.6 x.62 Q18181PCECC 169 x 169 x x 6.6 x.62 Q181PCE 169 x 119 x x.67 x 5.61 Q181PCECC 169 x 119 x x.67 x 5.61 Q1818PCE 169 x 169 x x 6.6 x 5.61 Q1818PCECC 169 x 169 x x 6.6 x 5.61 Q18PCE 2 x 169 x x 6.6 x 5.61 Q18PCECC 2 x 169 x x 6.6 x 5.61 A x B x C are internal dimensions. Purchase panels separately. External Dimensions Cover L x W Style Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Panel Size D x E Panel Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Mounting G x H 110 x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x x x 6.0 x x 6.0 x x x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x x x 6.0 x x 6.0 x x x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x x x x x. 160 x x. 160 x x x x 6.0 x x 6.0 x x 6.0 F K P Q S EQUIPMENT PROTECTION PH FAX pentairprotect.com 297

69 Polycarbonate and ABS QLINE E Standard Product ABS Catalog Number AxBxC Q188ABE x 1 x x.92 x Q188ABECC x 1 x x.92 x Q118ABE 1 x 1 x.92 x.92 x Q118ABECC 1 x 1 x.92 x.92 x Q1818ABE 1 x 1 x.92 x 6.89 x Q1818ABECC 1 x 1 x.92 x 6.89 x Q18188ABE 1 x 1 x 6.89 x 6.89 x Q18188ABECC 1 x 1 x 6.89 x 6.89 x Q188ABE 1 x x 6.89 x 9.8 x Q188ABECC 1 x x 6.89 x 9.8 x Q1810ABE 119 x 69 x x 2.70 x.6 Q1810ABECC x 1 x x.92 x.9 Q1110ABE 119 x 119 x x.67 x.6 Q1110ABECC 1 x 1 x.92 x.92 x.9 Q18110ABE 169 x 119 x x.67 x.6 Q18110ABECC 1 x 1 x.92 x 6.89 x.9 Q181810ABE 169 x 169 x x 6.6 x.6 Q181810ABECC 1 x 1 x 6.89 x 6.89 x.9 Q1810ABE 2 x 169 x x 6.6 x.6 Q1810ABECC 1 x x 6.89 x 9.8 x.9 Q181ABE x 1 x 1 x.92 x.92 Q181ABECC x 1 x 1 x.92 x.92 Q111ABE 1 x 1 x 1.92 x.92 x.92 Q111ABECC 1 x 1 x 1.92 x.92 x.92 Q1811ABE 1 x 1 x 1.92 x 6.89 x.92 Q1811ABECC 1 x 1 x 1.92 x 6.89 x.92 Q18181ABE 1 x 1 x x 6.89 x.92 Q18181ABECC 1 x 1 x x 6.89 x.92 Q181ABE 169 x 119 x x.67 x 5.61 Q181ABECC 1 x 1 x 0.92 x 6.89 x Q1818ABE 169 x 169 x x 6.6 x 5.61 Q1818ABECC 1 x 1 x x 6.89 x Q18ABE 2 x 169 x x 6.6 x 5.61 Q18ABECC 1 x x x 9.8 x External Dimensions Cover L x W Style Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Opaque 1 x.92 x Clear 1 x.92 x Opaque 1 x 1.92 x.92 Clear 1 x 1.92 x.92 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque 1 x x.92 Clear 1 x x.92 Opaque 1 x x 6.89 Clear 1 x x 6.89 Opaque x x 6.89 Clear x x 6.89 Panel Size D x E Panel Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Q18PE 98 x 8.86 x 1.89 Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q1818PE 18 x x 5.8 Q18PE 22 x x 5.8 Q18PE 22 x x 5.8 Mounting G x H 110 x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x x x 6.0 x x 6.0 x x x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 5.8 x x x x 6.0 x x 6.0 x x x 60. x x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x x x x x. 160 x x. 160 x x x x 6.0 x x 6.0 x x 6.0 F K P Q S SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

70 Polycarbonate and ABS QLINE E EQUIPMENT PROTECTION PH FAX pentairprotect.com 299

71 Polycarbonate and ABS QLINE E Brass Inserts Self-tapping Brass Inserts fit into molded pads in the bottom of the enclosure. Inserts have an M2 internal machine screw thread and M self-tapping external thread. Bulletin: Q1Y Catalog Number Description Qty. Pkg. QEBI M2 thread inserts Hinge Kit Includes two polyamid hinges, eight M self-tapping zinc-plated screws, eight flat washers and drilling template. Use on all QLINE E enclosures. Kit might not meet Type requirements and should, therefore, be verified by customer. Bulletin: Q1Y Catalog Number QDEHK Mounting Bracket Kit Kit includes four polycarbonate brackets and four M self-tapping, plated screws. Use on all QLINE E enclosures. No modification to the enclosure is required for installation. Maintains listed ratings. Bulletin: Q1Y Catalog Number QEMFK Hardware Kit Four cross-point polyamide cover screws and four self-tapping plated screws used to mount optional panels, rails and other components. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Bulletin: Q1Y Catalog Number Description Fits QLINE Enclosure QEHK5 5-mm screw when C = 67 mm, 117 mm or 12 mm QEHK60 60-mm screw when C = 92 mm Panels Bulletin: Q1Y Panel Size D x E Catalog Number Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Q18PE 22 x x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

72 Polycarbonate and ABS QLINE E Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 01

73 Polycarbonate and ABS QLINE E QLINE E, EMC, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9: Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 IEC 60529, IP66 APPLICATION Medium-size QLINE E polycarbonate EMC enclosures have contoured bodies and flush cover screws for an attractive, contemporary appearance while also providing EMC protection in corrosive environments. SPECIFICATIONS Body is impact-resistant polycarbonate emc conductive coating in base and cover Gasket of silver/silicone mounting holes molded directly under cover screws Screws provided for mounting optional panel Polycarbonate material is easily punched, drilled, filed or sawed cross-point flush cover screws are strong, durable polyamide mounting tracks along body side walls for PC card installation molded internal pads for mounting optional panels, rails and other components FINISH Enclosure material is RAL 705 light-gray outside. Optional panels are conductive steel. Bulletin: Q1EM Standard Product Catalog Number AxBxC Q188PCEMC 1 x x 7.92 x x 2.91 Q118PCEMC 1 x 1 x 7.92 x.92 x 2.91 Q1110PCEMC 1 x 1 x 99. x. x. Q1818PCEMC 1 x 1 x x.92 x 2.91 Q18110PCEMC 1 x 1 x x.92 x. Q18188PCEMC 1 x 1 x x 6.89 x 2.91 Purchase panels separately. External Dimensions L x W 1 x.92 x 1 x 1.92 x.92 1 x 1.92 x.92 1 x x.92 1 x x.92 1 x x 6.89 Internal Dimensions A x B x C 119 x 69 x x 2.70 x x 119 x x.67 x x 119 x x.67 x x 119 x x.67 x x 119 x x.67 x x 169 x x 6.6 x 2.65 Panel Size D x E Panel Q18PE 98 x 8.86 x 1.89 Q11PE 98 x x.86 Q11PE 98 x x.86 Q181PE 18 x x.86 Q181PE 18 x x.86 Q1818PE 18 x x 5.8 Mounting G x H 110 x 60. x x 110. x. 110 x 110. x. 160 x x. 160 x x. 160 x x 6.0 F K P Q S T W X SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

74 Polycarbonate and ABS QLINE E EQUIPMENT PROTECTION PH FAX pentairprotect.com 0

75 Polycarbonate and ABS QLINE I QLINE I QLINE I, Type X INDUSTRY STANDARDS Polycarbonate Enclosure UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 CSA File No. 2186: Type, X, 12, 1 IEC 60529, IP66 ABS Enclosure NEMA/EEMAC Type, X, 12, 1 IEC 60529, IP66 APPLICATION The largest-sized QLINE enclosure, QLINE I provides easy access and protects larger controls from corrosive environments. Choose from screw cover, hinge, internal mounting, variable depth and quick-release latch options to meet your design and security requirements. The ABS series shares the same features and similar physical properties as the polycarbonate but is a more economical, non-ul rated alternative. SPECIFICATIONS Body is impact-resistant polycarbonate for PCI series and ABS for ABI series opaque and clear covers are impact-resistant polycarbonate for PCI; opaque covers are ABS for ABI series Polycarbonate and ABS material is easily punched, drilled, filed or sawed mounting holes molded directly under cover screws molded internal pads for mounting optional panels, rails and other components molded internal rails for mounting adjustable-depth panel kit Screws provided for mounting optional panel optional extension rings are molded polycarbonate cover includes a molded-in hole for wire lead Seamless foam-in-place gasket assures water-tight and dusttight seal material is halogen free Screw Cover Enclosures have easy-to-remove covers attached to body with strong, durable polyamide cross-point cover screws. Enclosures with Quick-Release Latches have polycarbonate hinges and polyester latches with a padlock provision. FINISH Polycarbonate and ABS enclosure material is RAL 705 light-gray inside and out. Optional panels are plated steel. ACCESSORIES See also Accessories. Brass Insert Kit Cover Screw Kit Extension Rings Hardware Kit H2OMIT Vent Drains, Type X Hinge Kit HOL-SEALERS Hole Seals Mounting Bracket Kit Panel Depth Fitting MODIFICATION AND CUSTOMIZATION Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. Bulletin: Q1 0 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

76 Polycarbonate and ABS QLINE I Standard Product Polycarbonate Catalog Number AxBxC Cover Style Cover Type External Dim s L x W Panel Panel Size D x E Extension Ring Mounting G x H F P Q R S T U Y Z Q20201PCI 188 x 188 x x 7.0 x.8 Opaque Screw Cover x x Q2020PI 160 x x 6.0 Q2020EXTI 180 x x Q20201PCICC 188 x 188 x x 7.0 x.8 Clear Screw Cover x x Q2020PI 160 x x 6.0 Q2020EXTI 180 x x Q0201PCI 288 x 188 x x 7.0 x.8 Opaque Screw Cover 00 x x Q020PI 260 x x 6.0 Q020EXTI 280 x x Q0201PCICC 288 x 188 x x 7.0 x.8 Clear Screw Cover 00 x x Q020PI 260 x x 6.0 Q020EXTI 280 x x Q0201PCI 88 x 188 x x 7.0 x.8 Opaque Screw Cover 00 x. x Q020PI 60 x x 6.0 Q020EXTI 80 x x Q0201PCICC 88 x 188 x x 7.0 x.8 Clear Screw Cover 00 x. x Q020PI 60 x x 6.0 Q020EXTI 80 x x Q001PCI 288 x 288 x x 11. x.8 Opaque Screw Cover 00 x x Q00PI 260 x x 10.2 Q00EXTI 280 x x Q001PCICC 288 x 288 x x 11. x.8 Clear Screw Cover 00 x x Q00PI 260 x x 10.2 Q00EXTI 280 x x Q001PCI 88 x 288 x x 11. x.8 Opaque Screw Cover 00 x 00. x Q00PI 60 x x 10.2 Q00EXTI 80 x x Q001PCICC 88 x 288 x x 11. x.8 Clear Screw Cover 00 x 00. x Q00PI 60 x x 10.2 Q00EXTI 80 x x Q6001PCI 00 x 600 x x 2.62 x 5.12 Opaque Screw Cover 600 x x Q600PI 560 x x 10.2 Q600EXTI 0 x x Q6001PCICC 00 x 600 x x 2.62 x 5.12 Clear Screw Cover 600 x x Q600PI 560 x x 10.2 Q600EXTI 0 x x Q6001PCI 00 x 600 x 10. x 2.62 x 5.12 Opaque Screw Cover 600 x x. Q600PI 560 x x 1.17 Q600EXTI 0 x x Q6001PCICC 00 x 600 x 10. x 2.62 x 5.12 Clear Screw Cover 600 x x. Q600PI 560 x x 1.17 Q600EXTI 0 x x Q202018PCI 188 x 188 x x 7.0 x 6.81 Opaque Screw Cover x x Q2020PI 160 x x 6.0 Q2020EXTI 180 x x Q202018PCICC 188 x 188 x x 7.0 x 6.81 Clear Screw Cover x x Q2020PI 160 x x 6.0 Q2020EXTI 180 x x Q02018PCI 288 x 188 x x 7.0 x 6.81 Opaque Screw Cover 00 x x Q020PI 260 x x 6.0 Q020EXTI 280 x x Q02018PCICC 288 x 188 x x 7.0 x 6.81 Clear Screw Cover 00 x x Q020PI 260 x x 6.0 Q020EXTI 280 x x Q02018PCI 88 x 188 x x 7.0 x 6.81 Opaque Screw Cover 00 x. x Q020PI 60 x x 6.0 Q020EXTI 80 x x Q02018PCICC 88 x 188 x x 7.0 x 6.81 Clear Screw Cover 00 x. x Q020PI 60 x x 6.0 Q020EXTI 80 x x Q0018PCI 288 x 288 x x 11. x 6.81 Opaque Screw Cover 00 x x Q00PI 260 x x 10.2 Q00EXTI 280 x x Q0018PCICC 288 x 288 x x 11. x 6.81 Clear Screw Cover 00 x x Q00PI 260 x x 10.2 Q00EXTI 280 x x Q0018PCI 88 x 288 x x 11. x 6.81 Opaque Screw Cover 00 x 00. x Q00PI 60 x x 10.2 Q00EXTI 80 x x Q0018PCICC 88 x 288 x x 11. x 6.81 Clear Screw Cover 00 x 00. x Q00PI 60 x x 10.2 Q00EXTI 80 x x Q60018PCI 00 x 600 x x 2.62 x 7.09 Opaque Screw Cover 600 x x Q600PI 560 x x 10.2 Q600EXTI 0 x x Q60018PCICC 00 x 600 x x 2.62 x 7.09 Clear Screw Cover 600 x x Q600PI 560 x x 10.2 Q600EXTI 0 x x Q60018PCI 00 x 600 x 180. x 2.62 x 7.09 Opaque Screw Cover 600 x x. Q600PI 560 x x 1.17 Q600EXTI 0 x x Q60018PCICC 00 x 600 x 180. x 2.62 x 7.09 Clear Screw Cover 600 x x. Q600PI 560 x x 1.17 Q600EXTI 0 x x Q20201PCIQRR x x 10 x x 5.12 Opaque QR Latch x x Q2020PI 160 x x x x Q20201PCIQRCCR x x 10 x x 5.12 Clear QR Latch x x Q2020PI 160 x x x x Q0201PCIQRR x 00 x 10 x x 5.12 Opaque QR Latch 00 x x Q020PI 260 x x x x Q0201PCIQRCCR x 00 x 10 x x 5.12 Clear QR Latch 00 x x Q020PI 260 x x x x Q0201PCIQRR x 00 x 10 x. x 5.12 Opaque QR Latch 00 x. x Q020PI 60 x x x x Q0201PCIQRCCR x 00 x 10 x. x 5.12 Clear QR Latch 00 x. x Q020PI 60 x x x x Q001PCIQRR 00 x 00 x x x 5.12 Opaque QR Latch 00 x x Q00PI 260 x x x x Q001PCIQRCCR 00 x 00 x x x 5.12 Clear QR Latch 00 x x Q00PI 260 x x x x Q001PCIQRR 00 x 00 x x. x 5.12 Opaque QR Latch 00 x 00. x Q00PI 60 x x x x Q001PCIQRCCR 00 x 00 x x. x 5.12 Clear QR Latch 00 x 00. x Q00PI 60 x x x x EQUIPMENT PROTECTION PH FAX pentairprotect.com 05

77 Polycarbonate and ABS QLINE I Catalog Number AxBxC Cover Style Cover Type External Dim s L x W Panel Panel Size D x E Extension Ring Mounting G x H F P Q R S T U Y Z Q6001PCIQRR 00 x 600 x x 2.62 x 5.12 Opaque QR Latch 600 x x Q600PI 560 x x x x Q6001PCIQRCCR 00 x 600 x x 2.62 x 5.12 Clear QR Latch 600 x x Q600PI 560 x x x x Q6001PCIQRR 00 x 600 x 10. x 2.62 x 5.12 Opaque QR Latch 600 x x. Q600PI 560 x x x x Q6001PCIQRCCR 00 x 600 x 10. x 2.62 x 5.12 Clear QR Latch 600 x x. Q600PI 560 x x x x Q202018PCIQRR x x 180 x x 7.09 Opaque QR Latch x x Q2020PI 160 x x x x Q202018PCIQRCCR x x 180 x x 7.09 Clear QR Latch x x Q2020PI 160 x x x x Q02018PCIQRR x 00 x 180 x x 7.09 Opaque QR Latch 00 x x Q020PI 260 x x x x Q02018PCIQRCCR x 00 x 180 x x 7.09 Clear QR Latch 00 x x Q020PI 260 x x x x Q02018PCIQRR x 00 x 180 x. x 7.09 Opaque QR Latch 00 x. x Q020PI 60 x x x x Q02018PCIQRCCR x 00 x 180 x. x 7.09 Clear QR Latch 00 x. x Q020PI 60 x x x x Q0018PCIQRR 00 x 00 x x x 7.09 Opaque QR Latch 00 x x Q00PI 260 x x x x Q0018PCIQRCCR 00 x 00 x x x 7.09 Clear QR Latch 00 x x Q00PI 260 x x x x Q0018PCIQRR 00 x 00 x x. x 7.09 Opaque QR Latch 00 x 00. x Q00PI 60 x x x x Q0018PCIQRCCR 00 x 00 x x. x 7.09 Clear QR Latch 00 x 00. x Q00PI 60 x x x x Q60018PCIQRR 00 x 600 x x 2.62 x 7.09 Opaque QR Latch 600 x x Q600PI 560 x x x x Q60018PCIQRCCR 00 x 600 x x 2.62 x 7.09 Clear QR Latch 600 x x Q600PI 560 x x x x Q60018PCIQRR 00 x 600 x 180. x 2.62 x 7.09 Opaque QR Latch 600 x x. Q600PI 560 x x x x Q60018PCIQRCCR 00 x 600 x 180. x 2.62 x 7.09 Clear QR Latch 600 x x. Q600PI 560 x x x x A x B x C are internal dimensions. Purchase panels and extension rings separately. 06 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

78 Polycarbonate and ABS QLINE I Standard Product ABS, Screw Cover External Dim s Catalog Number AxBxC Cover Style L x W Q20201ABI 188 x 188 x 12 Opaque x 7.0 x 7.0 x.8 x Q20201ABICC x x 10 Clear x x x 5.12 x Q0201ABI 00 x x 12 Opaque 00 x x x x Q0201ABICC x 00 x 10 Clear 00 x x x x Q0201ABI 88 x 188 x 12 Opaque 00 x.28 x 7.0 x.8. x Q0201ABICC x 00 x 10 Clear 00 x x. x x Q001ABI 288 x 288 x 12 Opaque 00 x x 11. x x Q001ABICC 00 x 00 x 10 Clear 00 x x x x Q001ABI 88 x 288 x 12 Opaque 00 x x 11. x.8. x Q001ABICC 00 x 00 x 10 Clear 00 x x. x x Q6001ABI 00 x 600 x 10 Opaque 600 x x 2.62 x x Q6001ABICC 00 x 600 x 10 Clear 600 x x 2.62 x x Q6001ABI 00 x 600 x 10 Opaque 600 x 00. x 2.62 x x. Q6001ABICC 00 x 600 x 10 Clear 600 x 00. x 2.62 x x. Q202018ABI 188 x 188 x 17 Opaque x 7.0 x 7.0 x 6.81 x Q202018ABICC x x 180 Clear x x x 7.09 x Q02018ABI 288 x 188 x 17 Opaque 00 x 11. x 7.0 x x Q02018ABICC x 00 x 180 Clear 00 x x x x Q02018ABI 88 x 188 x 17 Opaque 00 x.28 x 7.0 x x Q02018ABICC x 00 x 180 Clear 00 x x. x x Q0018ABI 288 x 288 x 17 Opaque 00 x x 11. x x Q0018ABICC 00 x 00 x 180 Clear 00 x x x x Q0018ABI 88 x 288 x 17 Opaque 00 x x 11. x x Q0018ABICC 00 x 00 x 180 Clear 00 x x. x x Q60018ABI 00 x 600 x 180 Opaque 600 x x 2.62 x x Q60018ABICC 00 x 600 x 180 Clear 600 x x 2.62 x x Q60018ABI 00 x 600 x 180 Opaque 600 x 00. x 2.62 x x. Q60018ABICC 00 x 600 x 180 Clear 600 x 00. x 2.62 x x. Panel Size D x E Panel Q2020PI 160 x x 6.0 Q2020PI 160 x x 6.0 Q020PI 260 x x 6.0 Q020PI 260 x x 6.0 Q020PI 60 x x 6.0 Q020PI 60 x x 6.0 Q00PI 260 x x 10.2 Q00PI 260 x x 10.2 Q00PI 60 x x 10.2 Q00PI 60 x x 10.2 Q600PI 560 x x 10.2 Q600PI 560 x x 10.2 Q600PI 560 x x 1.17 Q600PI 560 x x 1.17 Q2020PI 160 x x 6.0 Q2020PI 160 x x 6.0 Q020PI 260 x x 6.0 Q020PI 260 x x 6.0 Q020PI 60 x x 6.0 Q020PI 60 x x 6.0 Q00PI 260 x x 10.2 Q00PI 260 x x 10.2 Q00PI 60 x x 10.2 Q00PI 60 x x 10.2 Q600PI 560 x x 10.2 Q600PI 560 x x 10.2 Q600PI 560 x x 1.17 Q600PI 560 x x 1.17 Extension Ring Mounting G x H F Q2020EXTI 180 x x Q2020EXTI 180 x x Q020EXTI 280 x x Q020EXTI 280 x x Q020EXTI 80 x x Q020EXTI 80 x x Q00EXTI 280 x x Q00EXTI 280 x x Q00EXTI 80 x x Q00EXTI 80 x x Q600EXTI 0 x x Q600EXTI 0 x x Q600EXTI 0 x x Q600EXTI 0 x x Q2020EXTI 180 x x Q2020EXTI 180 x x Q020EXTI 280 x x Q020EXTI 280 x x Q020EXTI 80 x x Q020EXTI 80 x x Q00EXTI 280 x x Q00EXTI 280 x x Q00EXTI 80 x x Q00EXTI 80 x x Q600EXTI 0 x x Q600EXTI 0 x x Q600EXTI 0 x x Q600EXTI 0 x x P Q R S T U Y Z EQUIPMENT PROTECTION PH FAX pentairprotect.com 07

79 Polycarbonate and ABS QLINE I 08 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

80 Polycarbonate and ABS QLINE I EQUIPMENT PROTECTION PH FAX pentairprotect.com 09

81 Polycarbonate and ABS QLINE I Cover Screw Kit Screws are polyamide. Wing-headstyle screws provide rapid access to enclosure interior without requiring special tools to open. Kit includes four polyamide cover screws and four self-tapping, plated panel screws. Tamper-resistant screws have molded -mm double-bit drive; kit includes four cover screws, one key and four self-tapping, plated panel screws. Use on all QLINE I enclosures. Bulletin: Q1Y Catalog Number QIWHSK QITSK Description wing-head screw -mm tamper-resistant double-bit Brass Insert Kit Four M5 self-tapping brass inserts screw into molded pads in bottom of enclosure. Inserts have M internal thread. Bulletin: Q1Y Catalog Number QBIK Panel Depth Fitting Panel Depth Fitting attaches to corner molded rails of enclosure to facilitate full-range front-toback panel adjustment. Package includes four polyamide fittings and plated screws. Use on all QLINE I enclosures. Bulletin: Q1Y Catalog Number QIPDF Swing Panel Adjustable-depth aluminum swing panels, for use in QLINE I polycarbonate enclosures, provide a convenient way to install controls and instruments near enclosure body opening while providing access and security. Suitable applications include water, pulp and paper, petroleum and chemical processing, food, packaging and pharmaceutical applications. Bulletin: Q1Y Panel Size D x E Catalog Number QIHFP22A 186 x x 7.09 QIHFP2A 186 x x QIHFP2A 286 x x 7.09 QIHFP2A 86 x x 7.09 QIHFPA 286 x x QIHFPA 86 x x QIHFP6A 6 x x QIHFP6A 6 x x 1.96 Fits Enclosure Size A x B x x 00 x x 00 x x 00 x. x 00 x x x 00. x x x x x. Hinged Side of Enclosure SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

82 Polycarbonate and ABS QLINE I Hinge Kit Hinge Kit includes two polyamide hinges, eight M self-tapping plated screws, eight flat washers and drilling template. Use on all QLINE I enclosures. Hinge Kit meets Type requirements. Three hinges required for 600-mm sides. Bulletin: Q1Y Catalog Number QIHK Mounting Bracket Kit Mounting Bracket Kit has four polycarbonate brackets and four M self-tapping, plated screws. Kit is field-installable. Use on all QLINE I Enclosures. Maintains listed ratings for enclosure. Bulletin: Q1Y Catalog Number QIMFK Hardware Kit Hardware Kit includes four polyamide cover screws and four self-tapping, plated panel screws. This kit is offered as a replacement kit for lost or damaged hardware originally furnished with the enclosure. Bulletin: Q1Y Catalog Number QIHK2 Description 2-mm screws Extension Rings Extension rings can be added to QLINE I enclosures to provide additional 50-mm to enclosure depth. Extension rings are polycarbonate and cannot be used with quick-release latches. Bulletin: Q1Y Catalog Number Q2020EXTI Q020EXTI Q00EXTI Q020EXTI Q00EXTI Q600EXTI Q600EXTI Use with Enclosure Catalog Number Beginning With Q2020 Q020 Q00 Q020 Q00 Q600 Q600 Panels Bulletin: Q1Y Catalog Number Panel Size D x E (mm) Panel Size D x E (in.) Q2020PI 160 x x 6.0 Q020PI 260 x x 6.0 Q00PI 260 x x 10.2 Q020PI 60 x x 6.0 Q00PI 60 x x 10.2 Q600PI 560 x x 10.2 Q600PI 560 X x 1.17 EQUIPMENT PROTECTION PH FAX pentairprotect.com 11

83 Polycarbonate and ABS QLINE I QLINE I, EMC, Type X INDUSTRY STANDARDS UL 508A Listed; Type, X, 12, 1; File No. E61997 cul Listed per CSA C22.2 No 9; Type, X, 12, 1; File No. E61997 Enclosure flammability evaluated per UL 508A NEMA/EEMAC Type, X, 12, 1 IEC 60529, IP66 APPLICATION The largest-size enclosures in the QLINE EMC series, the screwcover QLINE I protects larger controls from electromagnetic interference in corrosive environments. SPECIFICATIONS Body is impact-resistant polycarbonate Polycarbonate material is easily punched, drilled, filed or sawed emc coating in base and cover Gasket of silver/silicone mounting holes molded directly under cover screws molded internal pads for mounting optional panels, rails and other components molded internal rails for mounting adjustable depth panel kit Screws provided for mounting optional panel easily removable covers attached to body with strong, durable polyamide cross-point cover screws FINISH Enclosure material is RAL 705 light gray outside. Optional panels are conductive steel. Bulletin: Q1EM Standard Product Catalog Number AxBxC Q20201PCEMC x x 12 x x.8 Q0201PCEMC 00 x x x x.8 Q0201PCEMC 00 x x 12. x x.8 Purchase panels separately. External Dimensions L x W x x 00 x x 00 x. x Internal Dimensions A x B x C 188 x x x x x x 7.0 Panel Size D x E Panel Q2020PI 160 x x 6.0 Q020PI 260 x x 6.0 Q020PI 60 x x 6.0 Mounting G x H 180 x x x x x x 7.09 F P Q R S T U Y Z SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION