nèorapportpro 6.9 User Manual Mac OS / Windows Module for Adobe Photoshop July, 2013 Inèdit Software S.L.

Transcription

1 Mac OS / Windows Module for Adobe Photoshop User Manual July, 2013 Inèdit Software S.L.

2 INDEX 1. What is nèorapportpro? 2. Starting nèorapportpro 3. Main window 4. Automatic rapport 5. Rapport options 6. Offset options 7. Repetition options 8. Original window 9. Practical example 1

3 1. What is nèorapportpro? nèorapportpro is a module for Adobe Photoshop, that offers every possible tool to generate the rapport of a design. Its options allow to choose among horizontal or vertical repetitions, to set the displacement (1/2, 1/3, 2/3, etc. or any value with units such as 1 cm, 4,2 mm, 20 pix...) and it was designed to work with very large images too. Requirements Macintosh: PowerPC G5 or multicore Intel processor. Mac Os X v or higher. 4GB minimum RAM memory (16GB recommended). Adobe Photoshop CS4, CS5, CS5.5, 32bits. Windows: Intel Pentium 4 or AMD Athlon, multicore Intel processor or equivalent. Microsoft Windows XP with Service Pack 3, Windows 7 with Service Pack 1 or Windows 8. 4GB minimum RAM memory (16GB recommended). Adobe Photoshop CS4 to CS6, 32bits. Installation Open the file neotextil Installer.mpkg (Mac version) or neotextil_6.7_multi.exe (PC version), and follow the instructions. The first time you use this module you will be required to enter a code. You can use the module in Demo mode for testing. 2

4 2. STARTING nèorapportpro Open the image with Adobe Photoshop; open the menu File - Automate - nèorapportpro: 3

5 3. MAIN WINDOW When you open an image with this module you will access the program and see the first main window: On the first window, on the left, there are the various configuration options, divided in groups: Rapport, Offset, Repeat and Original. The large preview window allows to follow the adjustments we do while we work. From the given options we can activate the Automatic rapport option, select the Main Layer, and define the Rapport type, the Offset and the size of the Repeat preview with Photoshop default units. The information can then be seen in the Original group: 4

6 The three top buttons perform the following actions: Clicking on Set origin, a window pops-up asking you to set the origin to the current ruler offset (0,0) or not. 5

7 Clicking on Cancel the module finishes, restoring the rapport parameters. Clicking on Ok the module apply the offset in the original document and finishes, saving the rapport parameters in the document. 4. AUTOMATIC RAPPORT This option activates or deactivates the Automatic Rapport. When it is on, it becomes usable with the Move tool from Adobe Photoshop. 6

8 When the option Automatic Raport is selected we move the layer using the Move tool, or we click on D letter to change the tool. When we call the module, this will apply the selected offset on the selected layer and to the ones connected to it. If we continue with the same tool, the movement will be applied also, but we won t be able to visualize it from the module s preview window. 5. RAPPORT OPTIONS It shows rapport Drop and Mode options. The field Drop sets the offset between repeats. You can enter any fraction you need such us 1/2, 1/3, 2/3. Also, you can specify any offset such as 1 cm, 30 pixels. The field Mode sets the direction of the drop field. When the Drop field is not a multiple of the Horizontal or Vertical image size (according to field Mode), the window shows an alert icon, meaning that the separation between each repetition may vary slightly. 7

9 The following images show examples of drops and rapport types: nèorapportpro 6.9 1/1 horizontal or vertical Drop 1/2 vertical Drop 1/3 vertical Drop 1/2 horizontal Drop 1/3 horizontal Drop Note: The rapport edit button will be deactivated if an offset is set. 6.OFFSET OPTIONS The Offset group allows to set the offset applied to the image. 8

10 The Offset icons let you change the offset to four relative positions to the image. Sets the offset to origin Sets the offset to the vertical origin and 1/2 width of the image Sets the offset to the horizontal origin and 1/2 height of the image Sets the offset at 1/2 width and 1/2 height of the image 7. REPEAT OPTIONS Shows the Origin, Size, Resolution and Scale of the repeat, and the resolution and scales of the repeat preview parameters. 9

11 The Edit button opens the editing window of the Repetition parameters. The Repeat Size fields are shown at the top, where the desired repeat values of the rapport can be adjusted. The button Rapport Minimum sets the final repeat size at the minimum size, so that the result will repeat at 1/1 rapport, according to the drop and rapport type and the distance between repeats. 10

12 Ticking on Original repeat guides, the module creates guides framing the original repeat, showing the current document with the present repeat. The Resolution of Repeat and the Resolution of Preview allow to set the resolution of the final document and the preview of the repeat. The fields Resolution and Scale of the repeat and repeat preview are linked. When the scale is changed, the resolution will be changed in the corresponding proportion and the other way round. Note: The fields Resolution and Scale of the repeat let you use values between 1% and a 100% both of the image resolution and the scale. Also, the fields Resolution and Scale of the repeat preview let you use values between 1% and 50% of the image resolution, and between 1 and 50% of the scale. 8. ORIGINAL WINDOW This area shows the information of the original document: Width, Height and Resolution. 11

13 9. PRACTICAL EXAMPLE Open the image to process in Photoshop, and choose the module nèo RapportPro, as we have seen in section 2 of this manual. Important: If you wish to work with Automatic Rapport, the image can t be in Background layer. So, before calling up the module néo RapportPro, change the default Background layer to Layer 0. Once in the module, set the values of the Rapport and the Offset. If you wish so, also activate the Automatic rapport option. Here is an example of a 1/1 rapport: From the Repeat window we have set the repeats of the image. In this example, we have given the following values: Horizontal Size=4, and Vertical Size=4. In Resolution of preview we have selected 50% Scale, to have a better resolution of the repeats. 12

14 Press OK to confirm the values indicated. In the Preview it shows that the repeat is not correct: 13

15 Proceed working on the repeatability of the image in Adobe Photoshop. We will use the Move tool looks like the following: and will drag and move the image until it Call the module nèorapportpro again, and then press the key "D", and the image will be filled out according to the rapport information given. This option is only valid when the Automatic Rapport is activated. Now we have to continue retouching the image so that it fits the drawing, and for this we use Photoshop tools, obtaining the following effect: One more time we will execute neorapportpro module, which will remember the last parameters applied to the image. Observe that now it is not possible to edit neither Drop nor Mode fields. We have to restore the Repeat to the origin (0,0). 14

16 We will fix the image Drop at its initial value, that is to say, we will fix Offset at 0 pixels: We have obtained an image like the original, but retouched in such a way that it can now be used as a rapport. 15

17 The result is an image which is continually repeated. Note: If you want rapporting more than one layer, link the additional layers to the selected one and execute the module, either using the dialogue or the Move tool, when the option Automatic rapport is selected. 16