IterisXPetraPro Software User Manual

Size: px
Start display at page:

Download "IterisXPetraPro Software User Manual"

Transcription

1 IterisXPetraPro Software User Manual Rev. A October 2008

2 I IterisXPetraPro User Guide Table of Contents Part I Software Legal Notes 1 Part II Introduction 3 1 Program... Requirements Part III Software Installation Overview 1 IterisXPetraPro... Installation Part IV Program Overview Field Worksheet Program... Operation 10 Part V Iteris Product Support Index 18 19

3 Software Legal Notes 1 1 Software Legal Notes IMPORTANT - Carefully read the following terms and conditions BEFORE installing or using this software. Installing or using the software indicates your complete and unconditional acceptance of these terms and conditions. If you do not agree with these terms and conditions, promptly discontinue installation or use of software and destroy or return all copies of the software and all related documentation. License: Iteris, Inc. ( Iteris ) licenses Vantage IterisXPetraPro whether provided on storage media, in firmware, electronically or otherwise ( Software ) and any related documentation for description, use, operation, or maintenance of Software ( Documentation ) as follows: GRANT OF LICENSE. Iteris grants to the person or entity to whom the Software or Documentation is provided ( Licensee ) a non-exclusive license ( License ) to use the Software or Documentation solely for the purpose of operation, maintenance, and use of Iteris Vantage Video Traffic Detection Systems and related Products ( Purpose ). Title to the Software or Documentation is not transferred to the Licensee by this grant of license. Ownership and title to the Software and Documentation including any copy(ies) of the Software on any storage media or device, including without limitation, any floppy disk, CD, DVD, memory device, computer, network, etc., are retained by Iteris. COPYRIGHT. The Software and Documentation are owned by Iteris or its suppliers and are protected by United States copyright laws and international treaty provisions. Licensee shall not make copies of the Software or Documentation except as necessary to install Software on computers used for the Purpose or for backup or archive. All backup or archive copies of the Software or Documentation must contain the applicable copyright notice. Licensee shall not rent, disclose, publish, assign, lease, sublicense, create derivative products, market, transfer or use the Software or Documentation in any manner not expressly authorized by this Software License agreement ( Agreement ). Derivation or attempted derivation of the source code or structure of all or any portion of the Software by reverse engineering, decompiling, disassembly, or any other means and creating derivative works based on the Software are prohibited. PROVISION FOR TRANSFER OF LICENSE. This License may be transferred only in conjunction with the sale or transfer of the System or Products with which the Software or Documentation is normally used. This License to use the Software and Documentation for the Purpose will be granted to the transferee, at no charge, provided the transferee agrees to all terms and conditions as set forth above. The original Licensee shall retain no right to use the Software or Documentation and all copies shall either be delivered to transferee or destroyed. Software Limited Warranty. At time of delivery to the Licensee and for a period of ninety (90) days thereafter Iteris warrants (i) the Software will conform, in all material respects, to the functional capacities described in the Documentation, when used as instructed with specifically identified hardware; (ii) that Documentation contains necessary information to use the Software; and, (iii) that the media on which the Software is supplied shall be free from defects in material and workmanship. In any event, Iteris makes no representation or warranty, express or implied, that the operation of the Software will be uninterrupted or error free, that all non-conformities can or will be corrected, or that the Software will meet or satisfy Licensee s intended use, requirements, or expectations. This express warranty is extended by Iteris to the Licensee only, and only for commercial, industrial, or governmental use. Iteris' entire liability and Licensee s exclusive remedy shall be to use reasonable efforts to repair, modify, or replace the Software or to provide an avoidance procedure within a commercially reasonable time so that the Software conforms, in all material respects, to the functional capacities described in the Documentation. This warranty shall be void if any non-conformity has resulted from accident, abuse, misuse, misapplication, or modification or other breach of Software license. NO OTHER WARRANTIES OR GUARANTEES, EXPRESSED OR IMPLIED INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARISING BY LAW, CUSTOM OR CONDUCT, SHALL BE APPLICABLE TO THE SOFTWARE OR DOCUMENTATION. THE RIGHTS AND REMEDIES PROVIDED HEREIN ARE EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS OR REMEDIES. IN NO EVENT SHALL ITERIS HAVE ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR FOR LOSS, DAMAGE, OR EXPENSE DIRECTLY OR INDIRECTLY ARISING FROM USE OF THE SOFTWARE, OR ANY INABILITY TO USE IT EITHER SEPARATELY OR IN COMBINATION WITH OTHER SOFTWARE, EQUIPMENT OR MATERIALS, OR FROM ANY OTHER CAUSE. IN NO EVENT WHATSOEVER SHALL ITERIS LIABILITY EXCEED THE MONETARY VALUE OF TEN U. S. DOLLARS ($10). This Agreement is governed by the laws of the State of California.

4 2 IterisXPetraPro User Guide U.S. GOVERNMENT RESTRICTED RIGHTS The Software and Documentation are commercial items as that term is defined at 48 CFR 2.101, consisting of commercial computer software and commercial computer software documentation as such terms are used in 48 CFR Consistent with 48 CFR and 48 CFR through , U. S. Government end users acquire the Software and Documentation with only those rights set forth herein. Contractor/manufacturer is Iteris, Inc Carnegie Avenue, Santa Ana, CA January 2008 Software Testing: M. Linton, D. Sy Technical Writer / Consultant: S. Cummings Software Consultant: D. Gettner / Ridge Engineering

5 Software Legal Notes 2 3 Introduction IterisXPetraPro is a software program that takes Iteris Vantage data files and converts them into turning movement data files that you can open in Jamar s PetraPro software. You can also export the data to a standard.csv file that can be opened in Microsoft Excel and can be further manipulated in the Excel spreadsheet format. This document assumes you are familiar with Jamar s PetraPro software if that is the desired output format. It also assumes that you are familiar with the Iteris hardware and software needed to create the data input files used in this software. 2.1 Program Requirements Operating System: Microsoft Windows 98 or higher, including NT, ME, 2000, or XP. Hard Drive Space: 20 Megabytes of free hard drive space. System Memory: 64 Megabytes of RAM. Processor Speed: Pentium class processor. Jamar PetraPro: PetraPro version 1.X (Currently shipping version 1.5.0). Microsoft Excel: Excel 2003 or greater. 3 Software Installation Overview Most users will receive the IterisXPetraPro software on a CD for installation on their computer. Regardless of the type of media or method that you receive the software, the following section will detail the IterisXPetraPro installation process. The basic procedure is as follows: 1- Run the Setup.exe file that is part of the installation files. 2- Enter 999 for the Serial Number. 3- Accept all of the default screens. The software will create a folder and install the software to the C:\Program Files \IterisXPetraPro\ folder. A few folders will be created under the main folder to hold the Iteris count files, the PetraPro files, and an image file used in the software.

6 4 3.1 IterisXPetraPro User Guide IterisXPetraPro Installation The installation program is more than likely in a zip file like "IterisXPetraProVer0.913InstallFiles.zip". The first task will be to unzip the zip file into a temporary folder. There should be eight files in your new folder. Double click on the "Setup.exe" file to start the software installation. The first screen you see is the Welcome screen, shown here: The screen you see may vary a little bit depending on the video settings on your computer. Click the Next button to go to the next screen:

7 Software Installation Overview 5 This is the License Agreement screen. Scroll through the text to make sure you agree with the basic licensing agreement described. Click on the Yes button if you agree, which brings you to the next screen. This is the Customer Information screen. Enter your name and company in the text boxes. This software is not currently protected by unique serial numbers. Enter 999 for the serial number.

8 6 IterisXPetraPro User Guide Click on the Next button to go to the next screen. This is the Choose Destination Location screen. The installer will create and install the software in a folder called C:\Program Files\IterisXPetraPro\. If you want to change the destination folder then click on the Browse button and navigate to the folder you want to use. Normally you would accept the default, but it is your choice. Click Next to go to the next screen. This is the Select Program Folder screen. The installer creates a program group called IterisXPetraPro. Normally there is no need to edit this setting.

9 Software Installation Overview 7 Click Next to go to the next screen. This is the Summary screen. Check the current settings shown on the screen to make sure it looks ok. If something is wrong then use the Back buttons to fix the problem. Click Next to start the install process. If there are any problems the installer will show an error message, but this rarely happens When the install is done the final screen is shown. Your software is ready to run.

10 8 4 IterisXPetraPro User Guide Program Overview The basic concept for this software is as follows: Use the Iteris Vantage processor(s) to create count zones at an intersection, typically a right turn, thru, and left turn zone from each approach. You can create multiple zones in each lane if desired. The Vantage processor detects vehicles entering the count zones and saves the count data to a bin file. The count data can be retrieved from the processor using VRAS and saved as a text file. The study duration can be a few hours or a few days. When using multiple processors for the study, start and stop times along with data bin intervals must all remain the same. Next, transfer the previously saved count data text file(s) to your computer, run the IterisXPetra program software, and select the data file(s) you want to include in your study. You can assign zone numbers from the text file to specific turning movements at the intersection. The software can then create a Jamar PetraPro file.ppd or an Excel.CSV file in the folder that you specify. You can import the converted data file into the respective software program for further analysis. The rest of this document will explain this process in more detail.

11 Program Overview Field Worksheet To assist the user in keeping the zone information organized for entry into the IterisXPetraPro program, a PDF file has been created named "FieldWorksheetV09.pdf". Print this worksheet and use it for the intersection where you are conducting your data collection. Fill in the intersection information, including street names and zone numbers for the appropriate movements. Save this worksheet so you can use it as a reference for entering the data into the IterisXPetraPro program. The worksheet closely mirrors the "Assign Zone Numbers to Movements" screen which will be described in detail in the following section.

12 IterisXPetraPro User Guide Program Operation When you run the software, the first screen you see is the Select Iteris Count File screen, as shown in the screen shot below: On the left side of the screen is a directory tree that is commonly used in Windows programs. The Iteris Files folder under IterisXPetraPro is highlighted. On the right hand side of the screen are the Iteris data files in that folder. Each file is a separate line in the grid. A few parameters about each file are shown so that you can pick the proper files to use. In this example there are four files shown. These are the sample files that are installed with the software. Typically you would copy your Iteris data files to this folder, or to daughter folders you create under this folder. For example, you may want to have a separate folder for each site where you collect count data. In this way it would be easy to pick the files for a particular intersection. At the bottom of the screen are several buttons: Select All: Click this to select all of the files in the current folder. Clear All: Click this to un-select all of the files that are currently selected. >>> : Go to the next screen. Exit: End the program and return to Windows. You can select files by clicking on a row in the grid; the file for that row is highlighted

13 Program Overview 11 (background is set to black with white letters). You can un-select a file by clicking on a row that is currently highlighted. You can select up to a maximum of four data files. As you click on files in the grid, the number of files you selected is shown at the bottom of the screen between the Select All and Clear All buttons. In this example each file contains data for one approach at this intersection. You select all four files so you will have a turning movement count with all four approaches. Click on the >>> button to go to the next screen. You will see a screen like the one shown below: This is the Assign Zone Numbers to Movements screen, and really is the heart of the IterisXPetraPro program. On the left side of the screen is a section labeled Active Zone #s. The software scans through the files you selected in the previous screen and finds the Zone Numbers that are contained in those files. It lists the Zone Numbers it finds in the columns of the grid. Each column contains one complete file that you previously selected. The Zone Numbers are given a prefix number from 1 to 4 which represents the file in which the Zone Numbers were found. All of the Zone Numbers in the first column start with 1-, the second column start with 2-, etc. This is done because it is possible to have the same Zone Number in different files. There must be a way to distinguish identical Zone Numbers when they are assigned to movements, which is what the prefix does. On the right side of the screen is an image of an intersection with little text boxes superimposed on the image. There are three columns of four text boxes for each approach,

14 12 IterisXPetraPro User Guide one for right turns, one for thru movements, and one for left turns. There also are four longer text boxes that are used for the Street Names of the approaches. The software tries to figure out the proper Street Names to put in the text boxes based on the names of the count files but you may have to edit the Street Names if the software can t determine what to put there. In the upper left corner of the screen are Quick Directions to help you remember how to assign the Zone Numbers to the movements. You probably won t use this software every day so the Quick Directions will jog your memory when you get to this screen. It is easy to assign a Zone Number to a movement: Note: You should have a worksheet that you filled out in the field that shows the Zone Numbers you created in the Iteris Vantage system and what movements to assign them. 1- Click on a Zone Number in the grid on the left side of the screen. The background of the cell turns yellow to signify that it is highlighted. 2- Click on the appropriate movement text box on the image. When you do that the Zone Number (along with the prefix number) is copied to the text box. The background color of the Zone Number turns light red to signify that it has been selected. 3- Repeat this process until all of the Zone Numbers have been assigned to a movement. The screen shot below shows how the screen looks when the first four Zone Numbers from the EB approach have been assigned to movements.

15 Program Overview 13 In this example Zone 1-41 is the EB Right movement, 1-42 and 1-44 are EB Thru movements, and 1-43 is the EB Left movement. Note: You can have up to four Zone Numbers assigned to any one movement. Here is what the screen looks like when all of the Zone Numbers have been assigned to a movement. You can see that each movement in all four approaches has one or more Zone Numbers assigned.

16 14 IterisXPetraPro User Guide If you make a mistake in an assignment, it is easy to correct: Right Click on the Zone Number in the grid on the left side of the screen that is incorrectly assigned. The background color of the cell returns to green and the assignment for that Zone Number is deleted from the text box on the intersection image. You then can re-assign the Zone Number to the proper movement. Finally, make sure the Street Names for the approaches are correct. The software uses a small set of rules to determine the street name from the name of the Iteris count file. It is assumed that the file name is in the form StreetName XB.txt, where StreetName is the name of the street for that approach or approaches. The software looks at each file name and looks to see if the last two letters are NB, SB, EB, or WB. If they are, then it takes the rest of the file name as the street name and displays it in the text box for the appropriate approach. In the example shown above there were two Broadway files (EB & WB) and two Main files (NB & SB). Since these file names met the naming rules the street names were displayed automatically on the appropriate approaches. These names are exported to the PetraPro data file along with the data and other parameters. Note: Refer to the instructions for setting up the Iteris Vantage hardware and software for more details on creating and naming the count files to use with IterisXPetraPro. Once you have edited the Assign Zone Numbers to Movements screen click on the [ >>> ] button to go to the Turning Movement Data Details screen, shown here.

17 Program Overview 15 The software parses the data in the count files you selected and uses the assignments you made in the last screen to find the turning movement data, which is displayed on the grid on this screen. At the top of the screen are several parameters that will be exported to the PetraPro software along with the turning movement data. The purpose of this screen is to give you an opportunity to look at the turning movement data before you export the data. You want to make sure the data makes sense. Obviously you can t tell if each number is correct, but you can see general patterns. Check that the data peaks at reasonable times and that the volumes that are the highest are on the approaches you know have the highest volumes. If the data doesn t look right it may be because you picked the wrong count files or the count files were named incorrectly. There are two fields at the top of the screen that you can edit. One is the File Name, which defaults to the first count file processed. You often will want to edit this name to be more descriptive. The other is the Site Code, which is an important parameter for many users of Jamar s PetraPro software. You can edit it here if you know what you want to put there, or you can edit it later in the exported PetraPro study file. If it isn t important, then leave it blank. The exported file will be created and stored in the folder shown in the upper right corner of the screen. If you want to change the destination folder then click on the Edit button and navigate to the folder you want to use. IterisXPetraPro will remember this folder the next time you run the software. Normally you will set this folder once and then leave the setting alone. You have three export options:

18 16 IterisXPetraPro User Guide 1- Export to.csv. If you click this button the software will first ask you if you are sure (in case you clicked the wrong button) and then will create a.csv file that you can open in Microsoft Excel to manipulate in any way you want. 2- Export to PetraPro If you click this button the software will first ask you if you are sure (in case you clicked the wrong button) and then will create a.ppd file that you can open in Jamar s PetraPro software for editing and reporting. 3- Run PetraPro This button may or may not be visible. The software checks to see if you have PetraPro installed in the default folder used by Jamar, which is C:\Program Files \Jamar\PetraPro\. If it is then the button is shown. If you click this button the software first creates the.ppd file as in option 2, then runs PetraPro and loads the new data file into the edit screen of the software. The next screen you see looks like this:

19 Program Overview 17 You can edit the data and header parameters as needed and print reports. When you exit the PetraPro software you are returned to the IterisXPetraPro software. Once you have exported your data and/or returned from PetraPro you can end the program by clicking the Quit button or return to an earlier screen by clicking the [<<<] button.

20 18 5 IterisXPetraPro User Guide Iteris Product Support Vantage Product Support Team Contact Information The Iteris Vantage Product Support Team consists of a group of highly skilled individuals that are knowledgeable and readily available to answer your questions or assist you with any of our Vantage products. Please do not hesitate to contact us: Product Support Team: Phone: 1 (888) techsupport@iteris.com For more information on Iteris and the products and services that we provide, visit our Iteris Web Page at Thank you for your loyal support of our Vantage products.

21 Index Index -IIntroduction 3 -PProduct Support 18 Program Operation Detailed Program Overview 8 Program Requirements SSoftware Installation Detailed 4 Software Installation Overview 3 Software Legal Notes 1 19

SensView User Guide. Version 1.0 February 8, Copyright 2010 SENSR LLC. All Rights Reserved. R V1.0

SensView User Guide. Version 1.0 February 8, Copyright 2010 SENSR LLC. All Rights Reserved. R V1.0 SensView User Guide Version 1.0 February 8, 2010 Copyright 2010 SENSR LLC. All Rights Reserved. R001-419-V1.0 TABLE OF CONTENTS 1 PREAMBLE 3 1.1 Software License Agreement 3 2 INSTALLING SENSVIEW 5 2.1

More information

Ludlum Lumic Data Logger Software Manual Version 1.1.xx

Ludlum Lumic Data Logger Software Manual Version 1.1.xx Ludlum Lumic Data Logger Software Manual Version 1.1.xx Ludlum Lumic Data Logger Software Manual Version 1.1.xx Contents Introduction... 1 Software License Agreement... 2 Getting Started... 5 Minimum

More information

CX Recorder. User Guide. Version 1.0 February 8, Copyright 2010 SENSR LLC. All Rights Reserved. R V1.0

CX Recorder. User Guide. Version 1.0 February 8, Copyright 2010 SENSR LLC. All Rights Reserved. R V1.0 CX Recorder User Guide Version 1.0 February 8, 2010 Copyright 2010 SENSR LLC. All Rights Reserved. R001-418-V1.0 TABLE OF CONTENTS 1 PREAMBLE 3 1.1 Software License Agreement 3 2 INSTALLING CXRECORDER

More information

SonicWALL CDP 2.1 Agent Tool User's Guide

SonicWALL CDP 2.1 Agent Tool User's Guide COMPREHENSIVE INTERNET SECURITY b SonicWALL CDP Series Appliances SonicWALL CDP 2.1 Agent Tool User's Guide SonicWALL CDP Agent Tool User s Guide Version 2.0 SonicWALL, Inc. 1143 Borregas Avenue Sunnyvale,

More information

FONT SOFTWARE END USER LICENSE AGREEMENT. We recommend that you print this Font Software End User License Agreement for further reference.

FONT SOFTWARE END USER LICENSE AGREEMENT. We recommend that you print this Font Software End User License Agreement for further reference. FONT SOFTWARE END USER LICENSE AGREEMENT We recommend that you print this Font Software End User License Agreement for further reference. This Font Software End User License Agreement (the Agreement )

More information

User Guide. Portable Calibration Module

User Guide. Portable Calibration Module Portable Calibration Module User Guide CyberMetrics Corporation 1523 W. Whispering Wind Drive Suite 100 Phoenix, Arizona 85085 USA Toll-free: 1-800-777-7020 (USA) Phone: (480) 922-7300 Fax: (480) 922-7400

More information

Report Viewer Version 8.1 Getting Started Guide

Report Viewer Version 8.1 Getting Started Guide Report Viewer Version 8.1 Getting Started Guide Entire Contents Copyright 1988-2017, CyberMetrics Corporation All Rights Reserved Worldwide. GTLRV8.1-11292017 U.S. GOVERNMENT RESTRICTED RIGHTS This software

More information

vippaq Main App. User Guide

vippaq Main App. User Guide vippaq Main App. User Guide Edition 1d July 2008 Contents 1 INTRODUCTION 3 1.1 3 2 SYSTEM PREPARATION 4 2.1.1 Measuring Head Connection 5 2.1.2 Position the Measuring Heads 5 2.1.3 Start Job 5 3 MEASURE

More information

PC-Warrants 2. Quick Start Manual

PC-Warrants 2. Quick Start Manual PC-Warrants 2 Quick Start Manual 2 Copyright 2004-2016 by Ridge Engineering Technologies, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written

More information

FaciliWorks. Desktop CMMS Installation Guide

FaciliWorks. Desktop CMMS Installation Guide FaciliWorks Desktop CMMS Installation Guide FaciliWorks Desktop CMMS Installation Guide CyberMetrics Corporation 1523 West Whispering Wind Drive, Suite 100 Phoenix, Arizona 85085 USA Toll-free: 1-800-776-3090

More information

Upgrading BMDM and BMRG Software and MPM, BDS and DCM Firmware

Upgrading BMDM and BMRG Software and MPM, BDS and DCM Firmware Upgrading BMDM and BMRG Software and MPM, BDS and DCM Firmware 990 South Rogers Circle, Suite 11 Boca Raton, FL 33487 Tel: 561-997-2299 Fax: 561-997-5588 www.alber.com 1. Warranty and Limitation of Liability

More information

KepserverEx Client Connectivity Guide

KepserverEx Client Connectivity Guide Kepware Products for Windows 95,98, 2000, NT, And XP KepserverEx Client Connectivity Guide For Intellution s ifix KTSM-00017 Copyright 2001, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND

More information

KEPServerEx Client Connectivity Guide

KEPServerEx Client Connectivity Guide KEPServerEx Client Connectivity Guide For ObjectAutomation OAenterprise KTSM-00030 v. 1.03 Copyright 2005 Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND LIMITED WARRANTY The software accompanying

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Software Installation Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Software Installation Guide 2013 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written

More information

KEPServerEX Client Connectivity Guide

KEPServerEX Client Connectivity Guide KEPServerEX Client Connectivity Guide For Intellution s FIX32 KTSM-00005 v. 1.02 Copyright 2001, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND LIMITED WARRANTY The software accompanying this

More information

Manual NEWBASE WebShot 1.4. Copyright by NEWBASE GmbH, Hamburg, Germany

Manual NEWBASE WebShot 1.4. Copyright by NEWBASE GmbH, Hamburg, Germany Manual NEWBASE WebShot 1.4 Copyright by NEWBASE GmbH, Hamburg, Germany Table of contents Copyright... 3 NEWBASE License Agreement... 3 Maintenance... 4 Manual Conventions... 5 Installation 6 Starting and

More information

VW INTERFACE. The AutoSoft DMS and Finance Assistant Integration with VW OEM and VCI. The ASI and VW OEM Interface Solution

VW INTERFACE. The AutoSoft DMS and Finance Assistant Integration with VW OEM and VCI. The ASI and VW OEM Interface Solution AUTOSOFT INTEGRATION WITH VW OEM & VCI VW INTERFACE The AutoSoft DMS and Finance Assistant Integration with VW OEM and VCI These pages list all the Volkswagen OEM and VCI Interfaces available for your

More information

Quick Start Guide. Model 0260 Secondary Electronics

Quick Start Guide. Model 0260 Secondary Electronics Quick Start Guide Brooks Model 0260 Secondary Electronics 5 Quick Start Guide Dear Customer, The Brooks Smart Interface is a Microsoft Windows based software application that provides expanded control

More information

User Guide. Portable Calibration Module

User Guide. Portable Calibration Module Portable Calibration Module User Guide CyberMetrics Corporation 1523 W. Whispering Wind Drive Suite 100 Phoenix, Arizona 85085 USA Toll-free: 1-800-777-7020 (USA) Phone: (480) 922-7300 Fax: (480) 922-7400

More information

Installation Guide Installing / Licensing / Unlocking Kepware Products

Installation Guide Installing / Licensing / Unlocking Kepware Products Installation Guide Installing / Licensing / Unlocking Kepware Products License Registration & Unlock online at www.kepware.com/mykepware Kepware is the world leader in communication software for automation.

More information

DME-N Network Driver Installation Guide for M7CL

DME-N Network Driver Installation Guide for M7CL DME-N Network Driver Installation Guide for M7CL ATTENTION SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ( AGREEMENT ) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED

More information

KepserverEx Client Connectivity Guide

KepserverEx Client Connectivity Guide Kepware Products for Windows 95,98, 2000, NT, And XP KepserverEx Client Connectivity Guide For Rockwell Software s RSView KTSM-00002 Copyright 2001, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT

More information

Daniel MeterLink Software v1.40

Daniel MeterLink Software v1.40 Quick Start Manual P/N 3-9000-763, Rev K June 2017 Daniel MeterLink Software v1.40 for Daniel Gas and Liquid Ultrasonic Flow Meters Software License Agreement PLEASE READ THIS SOFTWARE LICENSE AGREEMENT

More information

ABSOFT Corporation Software License Agreement. Specifically for IMSL FORTRAN 5.0 BUNDLED WITH FORTRAN COMPILERS FROM ABSOFT FOR WINDOWS OR OS X

ABSOFT Corporation Software License Agreement. Specifically for IMSL FORTRAN 5.0 BUNDLED WITH FORTRAN COMPILERS FROM ABSOFT FOR WINDOWS OR OS X ABSOFT Corporation Software License Agreement Specifically for IMSL FORTRAN 5.0 BUNDLED WITH FORTRAN COMPILERS FROM ABSOFT FOR WINDOWS OR OS X (March 2008) IMPORTANT - READ THIS ENTIRE LICENSE AGREEMENT

More information

INTELLEX SOFTWARE VERSION 3.1 UPGRADE

INTELLEX SOFTWARE VERSION 3.1 UPGRADE INTELLEX SOFTWARE VERSION 3.1 UPGRADE This software upgrades an Intellex 3.0 unit to version 3.1 software. This release of the 3.1 software (v3.1.35) is configurable to English, French, German, and Spanish

More information

RIM AUTOSOFT DMS. affordable, simpler, innovative. p: f:

RIM AUTOSOFT DMS. affordable, simpler, innovative. p: f: AUTOSOFT DMS GM & RIM The AutoSoft DMS and GM RIM Solution General Motors is in the process of switching to an ebxml communication method known as General Motors rth America Exchange. Through this ebxml

More information

TOOLS for n Version2 Update Guide

TOOLS for n Version2 Update Guide TOOLS for n Version2 Update Guide SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ( AGREEMENT ) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE

More information

JMap. Mapping Software for Traffic Data

JMap. Mapping Software for Traffic Data i JMap Mapping Software for Traffic Data ii Copyright 2006 by JAMAR Technologies, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into any

More information

End User License Agreement

End User License Agreement End User License Agreement Kyocera International, Inc. ( Kyocera ) End User License Agreement. CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS ( AGREEMENT ) BEFORE USING OR OTHERWISE ACCESSING THE SOFTWARE

More information

ABB Network Partner. User s Manual CAP/REx 500*2.0

ABB Network Partner. User s Manual CAP/REx 500*2.0 User s Manual CAP/REx 500*2.0 This manual belongs to: Contents Chapter Page About this manual 1 Introduction 3 Instructions 7 References 15 Customer feedback report 17 Software Registration Form 19 Index

More information

SpanDisc. U s e r s G u i d e

SpanDisc. U s e r s G u i d e SpanDisc U s e r s G u i d e Introduction SpanDisc User s Guide SpanDisc is a complete disc archival and backup solution. SpanDisc uses the automation features or Rimage Corporation s Digital Publishing

More information

Installing Enterprise Switch Manager

Installing Enterprise Switch Manager Installing Enterprise Switch Manager ATTENTION Clicking on a PDF hyperlink takes you to the appropriate page If necessary, scroll up or down the page to see the beginning of the referenced section NN47300-300

More information

Quick Heal for Novell Netware User Guide

Quick Heal for Novell Netware User Guide QUICK HEAL TECHNOLOGIES (P) LTD. Quick Heal for Novell Netware User Guide QUICK HEAL FOR NOVELL NETWARE User Guide Quick Heal Technologies (P) Ltd. 603, Mayfair Towers II, Wakdewadi, Shivajinagar, Pune-

More information

SADL version 1.0 for Windows Satisfaction with Amplification in Daily Life

SADL version 1.0 for Windows Satisfaction with Amplification in Daily Life SADL version 1.0 for Windows Satisfaction with Amplification in Daily Life For scoring and administering the SADL survey. Table of Contents page Software License Agreement 1 Technical Support 3 System

More information

KEPServerEX Client Connectivity Guide

KEPServerEX Client Connectivity Guide KEPServerEX Client Connectivity Guide For LookoutDirect KTSM-00014 v. 1.02 Copyright 2001, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND LIMITED WARRANTY The software accompanying this license

More information

R227. Terms Code Discount per Sales Code Qty Ordered AR-1227

R227. Terms Code Discount per Sales Code Qty Ordered AR-1227 DSD Business Systems MAS 90/200 Enhancements R227 Terms Code Discount per Sales Code Qty Ordered AR-1227 Version 5.10 2 Terms Code Discount per Sales Code Qty Ordered Information in this document is subject

More information

PATGuard Time Manager 2

PATGuard Time Manager 2 PATGuard Time Manager 2 User Manual - i - Contents Disclaimer...iv License Agreement...v Introduction...6 Installing PATGuard Time Manager...6 Starting the Program...6 Program Overview...7 Open File...8

More information

KEPServerEX Client Connectivity Guide

KEPServerEX Client Connectivity Guide KEPServerEX Client Connectivity Guide For Kontron Czech Aspic 3.30 KTSM-00026 v. 1.02 Copyright 2004, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND LIMITED WARRANTY The software accompanying

More information

Generic HART DTM for FDT 1.2 compliant Frame Applications Release 4

Generic HART DTM for FDT 1.2 compliant Frame Applications Release 4 Generic HART DTM for FDT 1.2 compliant Frame Applications Release 4 Copyright ICS Industrielle Computer Systeme GmbH 2007, all rights reserved. Sublicense for brand labeled version granted to Microflex,

More information

Evaluation Board User Guide UG-163

Evaluation Board User Guide UG-163 Evaluation Board User Guide UG-163 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com GSM900 Evaluation Board for PLL Frequency Synthesizer

More information

Administrator s Guide

Administrator s Guide Administrator s Guide Version 2.3 LogiTel SecurVue 1 LogiTel SecurVue 2 Contents Introduction 4 Features 4 Hardware and Software Requirements 4 Installing SecurVue 5 Selecting a Database 6 Creating an

More information

Installation & Set-Up Guide (For PFW users)

Installation & Set-Up Guide (For PFW users) STC Utilities Installation & Set-Up Guide (For PFW users) Service Technologies Corporation makes no representations or warranties with respect to the contents of this guide and disclaims any implied warranties

More information

fontseek.info outofthedark.xyz

fontseek.info outofthedark.xyz Gza Seminegra 116 pt Gza Seminegra 102 pt Blitz Script 52 pt fontseek.info outofthedark.xyz 1 OWNERSHIP OF PRODUCT AND COPYRIGHT OUT OF THE DARK Print page 1 / 2 a The digital files downloaded to your

More information

Installation and Configuration Manual. Price List Utilities. for Microsoft Dynamics CRM Dynamics Professional Solutions Ltd 1 / 14

Installation and Configuration Manual. Price List Utilities. for Microsoft Dynamics CRM Dynamics Professional Solutions Ltd 1 / 14 Installation and Configuration Manual Price List Utilities for Microsoft Dynamics CRM 2011 Dynamics Professional Solutions Ltd 1 / 14 Copyright Warranty disclaimer Limitation of liability License agreement

More information

VoiceMaster. User s Guide. NETphone VoiceMaster Release 2.4. for Microsoft NT Servers, VoiceMaster User s Guide 1

VoiceMaster. User s Guide. NETphone VoiceMaster Release 2.4. for Microsoft NT Servers, VoiceMaster User s Guide 1 VoiceMaster User s Guide NETphone VoiceMaster Release 2.4 for Microsoft NT Servers, Information furnished by NetPhone, Inc. is believed to be accurate and reliable. However, no responsibility is assumed

More information

Table of contents 2 / 42

Table of contents 2 / 42 NFL Prediction Model 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 2 //42 3 4 5 6 7 8 9 1 42 Table of contents Program Setup... 3 End User License Agreement...

More information

Epson Professional Imaging

Epson Professional Imaging Epson Professional Imaging Epson Gemini 2 to Epson Gemini K3 Upgrade Program Epson Gemini 2 Customer Information All Fields Required Company Name Gemini K3 Ship To Information Ship To Location Use Same

More information

OfficeServ Link User Manual

OfficeServ Link User Manual OfficeServ Link User Manual Every effort has been made to eliminate errors and ambiguities in the information contained in this guide. Any questions concerning information presented here should be directed

More information

Network-MIDI Driver Installation Guide

Network-MIDI Driver Installation Guide Network-MIDI Driver Installation Guide ATTENTION SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ( AGREEMENT ) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE

More information

A Perception-Reaction-Time Solution

A Perception-Reaction-Time Solution User Guide Welcome to Response Vericom Response TM is a powerful tool used by Occupational Therapists, Medical Professionals, Research Teams, and Driver Training providers to test human Perception and

More information

NIOX MINO Data Manager User Manual

NIOX MINO Data Manager User Manual US ENGLISH NIOX MINO Data Manager User Manual for version 1.0.0.11 and higher Contact: Aerocrine, Inc. 562 Central Avenue New Providence, NJ 07974 USA Phone: (866) 275-6469 Fax: (877) 329-6469 E-mail:

More information

Font Software License

Font Software License Font Software License URW TYPE FOUNDRY GMBH Essener Straße 105 22419 Hamburg Germany TEL +49 (0) 40 60605 0 FAX +49 (0) 40 60605 111 info@urwtype.com www.urwtype.com 1.1 URW FONT SOFTWARE LICENSE CONTENT

More information

Getting Started (No installation necessary) Windows On Windows systems, simply double click the AntGram icon to launch the program.

Getting Started (No installation necessary) Windows On Windows systems, simply double click the AntGram icon to launch the program. AntGram (Windows) Build 1.0 (Released September 22, 2018) Laurence Anthony, Ph.D. Center for English Language Education in Science and Engineering, School of Science and Engineering, Waseda University,

More information

MANUAL. ENGLISH Odin Editor. Highlit e I nt ernat ional B.V. Vest ast raat EX K erkrade t he Net herlands

MANUAL. ENGLISH Odin Editor. Highlit e I nt ernat ional B.V. Vest ast raat EX K erkrade t he Net herlands MANUAL ENGLISH Odin Editor V1 Highlit e I nt ernat ional B.V. Vest ast raat 2 6468 EX K erkrade t he Net herlands Table of contents Software License Agreement... 2 Grant of License... 2 Copyright... 2

More information

1. License Grant; Related Provisions.

1. License Grant; Related Provisions. IMPORTANT: READ THIS AGREEMENT CAREFULLY. THIS IS A LEGAL AGREEMENT BETWEEN AVG TECHNOLOGIES CY, Ltd. ( AVG TECHNOLOGIES ) AND YOU (ACTING AS AN INDIVIDUAL OR, IF APPLICABLE, ON BEHALF OF THE INDIVIDUAL

More information

Logging and Report Generator Program LRG. MS-Windows NT4.0, 2000 and XP Pro Version 7.0

Logging and Report Generator Program LRG. MS-Windows NT4.0, 2000 and XP Pro Version 7.0 Program LRG MS-Windows NT4.0, 2000 and XP Pro Version 7.0 Information in this document is subject to change without notice. Companies, names, and data used in examples herein are fictitious unless otherwise

More information

Cashbook. User Guide. User Guide

Cashbook. User Guide. User Guide Cashbook User Guide User Guide MYOB New Zealand Ltd WEBSITE www.myob.co.nz Copyright MYOB Technology Pty 1988-2010 All rights reserved. Trademarks MYOB is a registered trademark and use of it is prohibited

More information

AhnLab Software License Agreement

AhnLab Software License Agreement AhnLab Software License Agreement IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE. This AhnLab Software License Agreement (this "Agreement") is a legal agreement by and between you and AhnLab, Inc.

More information

KEPServerEX Client Connectivity Guide

KEPServerEX Client Connectivity Guide KEPServerEX Client Connectivity Guide For Siemen s WinCC KTSM-00008 v. 1.02 Copyright 2001, Kepware Technologies KEPWARE END USER LICENSE AGREEMENT AND LIMITED WARRANTY The software accompanying this license

More information

FirePoint 8. Setup & Quick Tour

FirePoint 8. Setup & Quick Tour FirePoint 8 Setup & Quick Tour Records Management System Copyright (C), 2006 End2End, Inc. End2End, Inc. 6366 Commerce Blvd #330 Rohnert Park, CA 94928 PLEASE READ THIS LICENSE AND DISCLAIMER OF WARRANTY

More information

Titration BindWorks Revision 1.1

Titration BindWorks Revision 1.1 Titration BindWorks Revision 1.1 Copyright 1998-2002 Calorimetry Sciences Corporation All Rights Reserved Printed in the United States of America No part of the manual may be photocopied or reproduced

More information

FlukeView. Users Manual. Software for ScopeMeter Test Tools

FlukeView. Users Manual. Software for ScopeMeter Test Tools FlukeView Software for ScopeMeter Test Tools Users Manual January 2016 2016 Fluke Corporation. All rights reserved. All product names are trademarks of their respective companies. License Agreement 2006-2016

More information

Battery Monitor Data Manager Report Generator Software. User s Guide

Battery Monitor Data Manager Report Generator Software. User s Guide Battery Monitor Data Manager Report Generator Software User s Guide 990 South Rogers Circle, Suite 11 Boca Raton, FL 33487 Tel: 561-997-2299 Fax: 561-997-5588 www.alber.com 1. Warranty and Limitation of

More information

Installation and User Manual Rev A August 2009

Installation and User Manual Rev A August 2009 TM Installation and User Manual 493499501 Rev A August 2009 VantageView Software License and Warranty IMPORTANT - Carefully read the following terms and conditions BEFORE installing this Software. Installing

More information

Getting Started (No installation necessary)

Getting Started (No installation necessary) ProtAnt (Windows) Build 1.2.1 (Released March 21, 2017) Laurence Anthony, Ph.D. Center for English Language Education in Science and Engineering, School of Science and Engineering, Waseda University, 3-4-1

More information

Electronic Control Software User Instructions

Electronic Control Software User Instructions Electronic Control Software User Instructions www.alliancelaundry.com Part No. 12-08-278R11 December 2017 License Agreement By installing this software you agree to the following provisions. If you do

More information

Notice to Users. Serial Number

Notice to Users. Serial Number E-SWIIPE Veerrssiion 2..0 USER S GUIDE Notice to Users The E-swipe user documentation has been written by Escan Technologies Corp. No part of this publication may be reproduced or distributed in any form

More information

Perfect Time Pro v User Manual

Perfect Time Pro v User Manual Perfect Time Pro v 2.0 - User Manual With Perfect Time Pro Version 2.0, we have combined two of our very successful product lines into one comprehensive time management solution. Merging our Point Of Entry

More information

System Administrators Guide

System Administrators Guide System Administrators Guide Standalone Version Freezerworks Unlimited Version 6.0 PO Box 174 Mountlake Terrace, WA 98043 www.freezerworks.com support@freezerworks.com 425-673-1974 877-289-7960 U.S. Toll

More information

END USER LICENSE AGREEMENT PANDA ANTIVIRUS 2007 / PANDA ANTIVIRUS + FIREWALL 2007 / PANDA INTERNET SECURITY 2007

END USER LICENSE AGREEMENT PANDA ANTIVIRUS 2007 / PANDA ANTIVIRUS + FIREWALL 2007 / PANDA INTERNET SECURITY 2007 END USER LICENSE AGREEMENT PANDA ANTIVIRUS 2007 / PANDA ANTIVIRUS + FIREWALL 2007 / PANDA INTERNET SECURITY 2007 Please read the following license agreement carefully before using this program. By accepting

More information

1. Introduction... 1 Features... 1 Package Contents... 1 System Requirements... 1 LED Status... 2

1. Introduction... 1 Features... 1 Package Contents... 1 System Requirements... 1 LED Status... 2 - i - Table of Contents 1. Introduction... 1 Features... 1 Package Contents... 1 System Requirements... 1 LED Status... 2 2. Installation... 3 Windows 7/ Vista... 3 Windows XP... 5 Windows 2000... 7 Windows

More information

Studio Manager. for / Installation Guide. Keep This Manual For Future Reference.

Studio Manager. for / Installation Guide. Keep This Manual For Future Reference. Studio Manager for / Installation Guide Keep This Manual For Future Reference. E i Important Information Exclusion of Certain Liability Trademarks Copyright Manufacturer, importer, or dealer shall not

More information

User s Manual. JAI Control Tool. Operation Manual. Document Version: C Document P/N:10493

User s Manual. JAI Control Tool. Operation Manual. Document Version: C Document P/N:10493 User s Manual JAI Control Tool Operation Manual Document Version: C Document P/N:10493 SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT CAREFULLY BEFORE DOWNLOADING OR USING THE

More information

Foxit Reader V1.2 Beta

Foxit Reader V1.2 Beta Foxit Reader V1.2 Beta For Windows Mobile Smartphone User Manual 2010 Foxit Corporation. All Rights Reserved. All rights reserved. Contents END USER LICENSE AGREEMENT...3 Overview...7 About this help...7

More information

Price List Utilities. For Dynamics CRM 2016

Price List Utilities. For Dynamics CRM 2016 Price List Utilities For Dynamics CRM 2016 Page 1 of 19 Price List Utilities 2016 Copyright Warranty disclaimer Limitation of liability License agreement Copyright 2016 Dynamics Professional Solutions.

More information

Oracle Technology Network Developer License Terms for Java Card Classic Edition and Java Card Connected Edition Software Development Kits

Oracle Technology Network Developer License Terms for Java Card Classic Edition and Java Card Connected Edition Software Development Kits Oracle Technology Network Developer License Terms for Java Card Classic Edition and Java Card Connected Edition Software Development Kits Export Controls Export laws and regulations of the United States

More information

7. copy or distribute the Software, or any part thereof, or any accompanying documentation or part thereof, other than in accordance with 3.

7. copy or distribute the Software, or any part thereof, or any accompanying documentation or part thereof, other than in accordance with 3. 1 Before You Begin AUSTRALIAN ACCESS SOFTWARE LICENCE AGREEMENT IMPORTANT - READ CAREFULLY 30 DAYS EVALUATION AND FULL LICENSED VERSIONS: A. By agreeing to this licence agreement and/or by installing,

More information

CompleteView Video Player User Manual. CompleteView Version 4.6.1

CompleteView Video Player User Manual. CompleteView Version 4.6.1 CompleteView Video Player User Manual CompleteView Version 4.6.1 Table of Contents Introduction... 3 End User License Agreement... 4 System Requirements... 5 Exporting the Video Player from Video Client...

More information

Installing Enterprise Switch Manager

Installing Enterprise Switch Manager Installing Enterprise Switch Manager NN47300-300 Document status: Standard Document version: 0401 Document date: 26 March 2008 All Rights Reserved The information in this document is subject to change

More information

Shimadzu LabSolutions Connector Plugin

Shimadzu LabSolutions Connector Plugin Diablo EZReporter 4.0 Shimadzu LabSolutions Connector Plugin Copyright 2016, Diablo Analytical, Inc. Diablo Analytical EZReporter Software EZReporter 4.0 Shimadzu LabSolutions Connector Plugin Copyright

More information

Foxit Reader for Pocket PC 1.0 Foxit Reader 1.0 For Pocket PC User Manual

Foxit Reader for Pocket PC 1.0 Foxit Reader 1.0 For Pocket PC User Manual Foxit Reader 1.0 For Pocket PC User Manual 2007 Foxit Software Company, LLC. All rights reserved. 1 Contents END USER LICENSE AGREEMENT... 3 Overview... 7 About Foxit Reader for Pocket PC 1.0 Help... 7

More information

PrimoPDF. Version 4.0 User Manual. Totally Free PDF Creation because It's everbody's PDF. Brought to you by

PrimoPDF. Version 4.0 User Manual. Totally Free PDF Creation because It's everbody's PDF. Brought to you by PrimoPDF Version 4.0 User Manual Totally Free PDF Creation because It's everbody's PDF Brought to you by NOTICE TO USER: THIS IS A CONTRACT. BY INSTALLING THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS

More information

MQESS Installation Manual

MQESS Installation Manual MQESS Installation Manual Capitalware Inc. Unit 11, 1673 Richmond Street, PMB524 London, Ontario N6G2N3 Canada sales@capitalware.com http://www.capitalware.com MQESS Installation and Operation Manual Page

More information

Opazity User Guide Setup, First Use & Advanced Technique

Opazity User Guide Setup, First Use & Advanced Technique Opazity User Guide Contents Introduction, T&C 1 Part 1. Installation and Setup 2 Part 2. Instructions for First Use 3 Part 3. Advanced technique: Highlighting areas of a slide at random 6 Appendix: End

More information

If the firmware version indicated is earlier than the "Version 1.06", please update the unit s firmware.

If the firmware version indicated is earlier than the Version 1.06, please update the unit s firmware. STEP 1. Check the current firmware version Panasonic recommends that you update the firmware in your SC-C70 if the firmware version indicated is older than the version being offered. Please check the current

More information

Getting Started (No installation necessary) Windows On Windows systems, simply double click the AntPConc icon to launch the program.

Getting Started (No installation necessary) Windows On Windows systems, simply double click the AntPConc icon to launch the program. AntPConc (Windows) Build 1.2.0 (Released March 25, 2017) Laurence Anthony, Ph.D. Center for English Language Education in Science and Engineering, School of Science and Engineering, Waseda University,

More information

PocketWeave User s Manual

PocketWeave User s Manual PocketWeave User s Manual Version 1.1 Written by Kriston M. Bruland AVL Looms 3851 Morrow Lane, Suite #9 Chico, CA 95928-8305 U.S.A. 530 893-4915 530 893-1372 (fax #) info@avlusa.com (e-mail) www.avlusa.com

More information

DSM PRO. Installation Manual. Copyright November DSM PRO Installation Manual Rev 2 Effective 5/24/05 1

DSM PRO. Installation Manual. Copyright November DSM PRO Installation Manual Rev 2 Effective 5/24/05 1 DSM PRO Installation Manual Copyright November 2003 DSM PRO Installation Manual Rev 2 Effective 5/24/05 1 DSM PRO CONNECTIONS TALKOVER LEVEL TALKOVER LEVEL DISPLAY SPEAKER VOLUME HEADSET VOLUME USB CABLE

More information

OBDII Programmer Quick Start Guide

OBDII Programmer Quick Start Guide COPYRIGHT The C.A.T.S. OBDII Programmer is copyright 2005 with all rights reserved. The distribution and sale of this software are for the exclusive use of the original purchaser for use exclusively on

More information

NuXeb. Version 2.0. For WinNT/Win2000/Win XP/Win2003. Release Date 18 September User s Manual MobileXdge Inc

NuXeb. Version 2.0. For WinNT/Win2000/Win XP/Win2003. Release Date 18 September User s Manual MobileXdge Inc NuXeb Version 2.0 For WinNT/Win2000/Win XP/Win2003 Release Date 18 September 2009 User s Manual 2009 MobileXdge Inc P1 End User License Agreement (EULA) IMPORTANT-READ CAREFULLY: This MobileXdge End-User

More information

ALL-TEST PRO 33IND PC Software Quick Start Guide

ALL-TEST PRO 33IND PC Software Quick Start Guide ALL-TEST PRO 33IND PC Software Quick Start Guide 2011 ALL-TEST Pro, LLC All Rights Reserved Rev 2011-12A Contact Information...2 Installation... 3 Introduction... 5 Basic commands... 7 New... 7 Open...

More information

MAS 90 Enhancements. LMSQ SQL Mirroring. Version 4.30

MAS 90 Enhancements. LMSQ SQL Mirroring. Version 4.30 DSD Business Systems MAS 90 Enhancements LMSQ SQL Mirroring Version 4.30 2 SQL Mirroring Information in this document is subject to change without notice. Copyright 1993-2008, DSD Business Systems All

More information

E-swipe User Guide. Escan Technologies Corporation

E-swipe User Guide. Escan Technologies Corporation Escan Technologies Corporation E-swipe User Guide Escan Technologies Corp. 12140 Severn Way Riverside, CA 92503 Phone (909) 270-0043 Fax (909) 270-0920 USER GUIDE ESCAN TECHNOLOGIES CORPORATION E-swipe

More information

IPNexus Server Secure Instant Messaging & Integrated Collaboration

IPNexus Server Secure Instant Messaging & Integrated Collaboration IPNexus Server Secure Instant Messaging & Integrated Collaboration Version 1.5 Installation & Setup Guide DOC00023 Rev. 1.0 01.03 VCON IPNexus Server Installation & Setup Guide 1 2003 VCON Ltd. All Rights

More information

Instruction Manual. HH610-SW Application Software for Portable & Bench Meters

Instruction Manual. HH610-SW Application Software for Portable & Bench Meters Instruction Manual HH610-SW Application Software for Portable & Bench Meters Dear Customer, Thank you for choosing an Omega product. Please read this instruction manual carefully before using the software.

More information

USB Data Card Programmer. user s manual and installation guide

USB Data Card Programmer. user s manual and installation guide USB Data Card Programmer user s manual and installation guide 2001 GARMIN Corporation GARMIN International, Inc. 1200 E 151 st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax.

More information

S354. Commission Rate Table by Salesperson/Customer/Item Code SO-1354

S354. Commission Rate Table by Salesperson/Customer/Item Code SO-1354 DSD Business Systems MAS 90/200 Enhancements S354 Commission Rate Table by Salesperson/Customer/Item Code SO-1354 Version 4.40 2 Commission Rate Table by Salesperson/Cust/Item Information in this document

More information

PRODUCT GUIDE. N u c l e u s D a t a R e c o v e r y. C o m P r i v a t e L i m i t e d

PRODUCT GUIDE. N u c l e u s D a t a R e c o v e r y. C o m P r i v a t e L i m i t e d PRODUCT GUIDE Table of Contents 1. About Kernel for PST Compress and Compact...4 1.1 Using this Manual...4 1.2 Introduction to Kernel for Compress and Compact...4 1.3 Key Features...5 1.4 System Requirements...5

More information

Instruction Manual. AP-SoftPrint. Multiwave 3000/ Multiwave ECO and Synthos 3000 Software v2.5

Instruction Manual. AP-SoftPrint. Multiwave 3000/ Multiwave ECO and Synthos 3000 Software v2.5 Instruction Manual AP-SoftPrint Multiwave 3000/ Multiwave ECO and Synthos 3000 Software v2.5 Instruction Manual AP-SoftPrint Multiwave 3000/ Multiwave ECO and Synthos 3000 Software v2.5 Anton Paar GmbH

More information