2D Wired Barcode Scanner Overview. Keyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language.
|
|
- Noah Anderson
- 6 years ago
- Views:
Transcription
1 2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed.the device can easily read barcodes on paper and other surface. Keyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language. For example If you use French Keyboard, scan below barcode of French keyboard. So the scanner can be able to upload barcodes according to French keyboard layout. American Keyboard is set by default, if you use a US keyboard you can skip this step. American Keyboard Portugal Keyboard French Keyboard Spanish Keyboard Germany Keyboard Turkey Q Keyboard 1
2 Italy Keyboard Scanning Mode Key Holding Press the button to trigger the reading, release the button to end the reading. Reading success or reading time over a single reading time will end the reading Continuous Mode The reading engine performs continuous work. Reading success or reading time over a single reading time will end the reading. More than the specified time will automatically trigger the next reading. Automatic Induction Mode In automatic induction mode, the scan engine detects the brightness of the surroundings. Trigger reading when the brightness changes. Reading success or reading time over a single reading time will end the reading. Regardless of the last success or failure to read, re-enter the detection of the surrounding environment brightness. Terminator configuration Add character format: Decode Data + Terminator Disable 2 CR & LF
3 CR TAB Beeper Volume To select a decode beep volume, scan the appropriate bar code. Low Medium *High Mute To enable or disable close all prompt, scan the appropriate bar code below. Disable Enable Default Configuration If you want to cancel all the configuration that you have done to the scanner. Scan below code the restore factory. 3
4 Common Function UPC/EAN Enable/Disable UPC-A To enable or disable UPC-A, scan the appropriate bar code below. *Enable UPC-A Disable UPC-A Enable/Disable UPC-E To enable or disable UPC-E, scan the appropriate bar code below. *Enable UPC-E Disable UPC-E Enable/Disable EAN-8 To enable or disable EAN-8, scan the appropriate bar code below. *Enable EAN-8 Disable EAN-8 Enable/Disable EAN-13 To enable or disable EAN-13, scan the appropriate bar code below. *Enable EAN-13 Disable EAN-13 4
5 Enable/Disable Bookland EAN(ISBN) To enable or disable EAN Bookland, scan the appropriate bar code below. Enable Bookland EAN *Disable Bookland EAN Decode UPC/EAN Supplementals Supplementals are bar codes appended according to specific format conventions (e.g.upc A+2, UPC E+2, EAN 13+2, EAN 13+5). The following options are available: *Ignore UPC/EAN with Supplementals Do not read supplementals The scan engine can only read the barcode no matter the barcode with supplementals or not. Only read the barcode with supplementals- The scan engine can only read the barcode with supplementals. Auto read supplementals- The scan engine can not only read the barcode with supplementals, but also read the barcode without supplementals. Transmit UPC-A Check Digit Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit. 5
6 *Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit Transmit UPC-E Check Digit Scan the appropriate bar code below to transmit the symbol with or without the UPC-E check digit. *Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit Convert UPC-E to UPC-A Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections Convert UPC-E to UPC-A Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data. *Do Not Convert UPC-E to UPC-A Code 128 Enable/Disable Code 128 To enable or disable Code 128, scan the appropriate bar code below. *Enable Code 128 Disable Code 128 6
7 Code 39 Enable/Disable Code 39 To enable or disable Code 39, scan the appropriate bar code below. *Enable Code 39 Disable Code 39 Transmit Code 39 Check Digit Scan this symbol to transmit the check digit with the data. Scan this symbol to transmit data without the check digit. Transmit Code 39 Check Digit (Enable) *Do Not Transmit Code 39 Check Digit (Disable) Enable/Disable Code 39 Full ASCII Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. See Table 4-3 for the mapping of Code 39 characters to ASCII values. Enable Code 39 Full ASCIl * Disable Code 39 Full ASCII NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If you get an error beep when enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again. 7
8 Code 93 Enable/Disable Code 93 To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 *Disable Code 93 Code 11 Enable/Disable Code 11 To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 *Disable Code 11 Transmit Code 11 Check Digits This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) *Do Not Transmit Code 11 Check Digit(s) (Disable) Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below. *Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 8
9 Transmit I 2 of 5 Check Digit Scan this symbol to transmit the check digit with the data. Transmit I 2 of 5 Check Digit (Enable) Scan this symbol to transmit data without the check digit. *Do Not Transmit I 2 of 5 Check Digit (Disable) Convert I 2 of 5 to EAN-13 This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this, I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit. Convert I 2 of 5 to EAN-13 *Do Not Convert I 2 of 5 to EAN-13 Discrete 2 of 5/Industrial 2 of 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 *Disable Discrete 2 of 5 Matrix 25 Enable/Disable Matrix 25 To enable or disable Matrix 25, scan the appropriate bar code below. Enable Matrix 25 *Disable Matrix 25 9
10 Transmit Matrix 25 Check Character Enable Matrix 25 Transmit Check Character Character * Disable Matrix 25 Transmit Check Codabar Enable/Disable Codabar To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar *Disable Codabar MSI/MSI PLESSEY Enable/Disable MSI To enable or disable MSI, scan the appropriate bar code below. Enable MSI *Disable MSI Transmit MSI Check Digit Scan this symbol to transmit the check digit with the data. Transmit MSI Check Digit (Enable) 10
11 Scan this symbol to transmit data without the check digit. *Do Not Transmit MSI Check Digit (Disable) GS1 DataBar/RSS Enable/Disable GS1 DataBar-14 To enable or disable GS1 DataBar-14, scan the appropriate bar code below. Enable GS1 DataBar-14 *Disable GS1 DataBar-14 Enable/Disable GS1 DataBar Limited To enable or disable GS1 DataBar Limited, scan the appropriate bar code below. Enable GS1 DataBar Limited *Disable GS1 DataBar Limited Enable/Disable GS1 DataBar Expanded To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below. Enable GS1 DataBar Expanded *Disable GS1 DataBar Expanded PDF417 Enable/Disable PDF417 To enable or disable PDF417, scan the appropriate bar code below. Disable PDF417 *Enable PDF417 11
12 QR Enable/Disable QR To enable or disable QR, scan the appropriate bar code below. Disable QR Code *Enable QR Code Data Matrix(DM) Enable/Disable Data Matrix(DM) To enable or disable Data Matrix(DM), scan the appropriate bar code below. Disable DataMatrix *Enable DataMatrix Maxi Code Enable/Disable Maxi Code To enable or disable Maxi Code, scan the appropriate bar code below. *Disable MaxiCode Enable MaxiCode 12
13 Prefix/Suffix Values A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See the Table 4-3 and Numeric Bar Codes in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix. To set the Prefix/Suffix values via serial commands, see Setting Prefixes and Suffixes Via Serial Commands. NOTE In order to use Prefix/Suffix values, the Scan Data Transmission Format must be set. Scan Prefix Scan Suffix 1 Scan Suffix 2 Scan Data Transmission Format To change the Scan Data Transmission Format, scan one of the eight bar codes corresponding to the desired format. *Data As Is <DATA><SUFFIX 1> <DATA><SUFFIX2> <DATA> <SUFFIX 1><SUFFIX 2> <PREFIX> <DATA > <PREFIX> <DATA> <SUFFIX 1> 13
14 <PREFIX> <DATA> <SUFFIX 2> <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2> 4. Appendix Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s)
15
16 9 Cancel To change the selection or cancel an incorrect entry, scan the bar code below. Cancel Example on how to set prefix and suffix Prefix Setting Step 1: scan prefix Scan Prefix Step 2: To set these values, scan a four-digit number (i.e. four bar codes) that corresponds to ASCII values. See the Table 4-3 and Numeric Bar Codes in appendix. Step 3: i.e if you want to add +, scan 1043 (one by one)
17 Step 4: Set Data Transmission Format <PREFIX> <DATA > Suffix Setting Step 1: scan suffix Scan Suffix 1 Step 2 and Step 3 same procedures like setting prefix Step 4: Set Data Transmission Format <DATA><SUFFIX 1> 17
18 Setting Prefixes and Suffixes Via Serial Commands To append a prefix and suffixes to the decode data: 1 Set the Scan Data Transmission Format (parameter 0xE2) to the desired option. 2 Enter the required value(s) for Prefix (0x69), Suffix1 (0x68) or Suffix2 (0x6A) using the hex values for the desired ASCII value from Table 4-3 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h %U CTRL h $A CTRL A h $B CTRL B h $C CTRL C h $D CTRL D h $E CTRL E h $F CTRL F h $G CTRL G h $H CTRL H h $I CTRL I Ah $J CTRL J Bh $K CTRL K Ch $L CTRL L Dh $M CTRL M Eh $N CTRL N Fh $O CTRL O h $P CTRL P h $Q CTRL Q h $R CTRL R h $S CTRL S h $T CTRL T h $U CTRL U h $V CTRL V h $W CTRL W h $X CTRL X
19 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code Scan Value Full ASCLL Code Keystroke 39 Encode Char Keystroke 39 Encode Char h $Y CTRL Y Ah $Z CTRL Z Bh %A CTRL [ Ch %B CTRL \ Dh %C CTRL ] Eh %D CTRL Fh %E CTRL h Space Space h /A! h /B h /C # h /D $ h /E % h /F & h /G h /H ( h /I ) Ah /J * Bh /K Ch /L, Dh Eh Fh / / h h h h h h h h 7 7
20 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h h Ah /Z : Bh %F ; Ch %G < Dh %H Eh %I > Fh %J? h h A A h B B h C C h D D h E E h F F h G G h H H h I I Ah J J Bh K K Ch L L Dh M M Eh N N Fh O O h P P h Q Q h R R h S S h T T h U U h V V
21 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h W W h X X h Y Y Ah Z Z Bh %K [ Ch %I \ Dh %M ] Eh %N ^ Fh %O _ h %W h +A a h +B b h +C c h +D d h +E e h +F f h +G g h +H h h +I i Ah +J j Bh +K k Ch +L l Dh +M m Eh +N n Fh +O o h +P p h +Q q h +R r h +S s h +T t h +U u
22 Table 4-3 Character Equivalents (Continued) Scan Value Hex Value Full ASCLL Code 39 Encode Char Keystroke h +V v h +W w h +X x h +Y y Ah +Z z Bh %P { Ch %Q Dh %R } Eh %S ~ Fh Undefined Support For any inquiries or comments concerning our products, please send an to service@gzxlscan.com, and we will respond to you as soon as possible. Contact Information Tel.: service@gzxlscan.com Web: Addr.: Unit 137, The Pacific Industry Park, Xintang Town,Zengcheng District, Guangzhou,China/ Made in China
2D Wired Barcode Scanner Overview
2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high performance processer with an effective decoding board, combining a fast decoding speed. IP67 waterproof
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-1202 Quick Setup Guide This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer
More informationKeyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language before you use it.
2.4G Wireless Barcode Scanner Overview Netum 2.4G wireless model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and a high anti-interference
More informationModel NT-1203 With SPP Mode
Model NT-1203 With SPP Mode Get Started: This is 1D and 2D bluetooth scanner. Follow below "bluetooth connection" instruction to pair with your device and then setup the keyboard language (if you US keyboard,
More informationThis configuration including four steps. Please scan below codes one by one.
Bluetooth Wireless Barcode Scanner Overview Netum bluetooth wireless model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and
More informationThis confirguration including four steps,please scan below codes one by one.
Wireless 2D Barcode Scanner Overview Netum wireless 2D model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and a high anti-interference
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-W8 V18.9.1 Quick Setup Guide This model can work both via USB cable or 2.4G receiver. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US
More informationIf you want to have other configurations please refer to below programming barcodes. Check Scanner Version
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationNT-1228BL. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationLow voltage Alarm: Scanner will make 5x beeps to remind you that it's under low voltage. Plug the USB cable to charge power for it.
NT-W6 V18.9.1 Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's a plug and play model. If you use other type of keyboard, please
More informationZ3S. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming. Working via USB cable
Z3S V18.9.7 Quick Setup Guide Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's a plug and play model. If you use other type
More informationFactory Default Configuration. Factory Default Configuration
Factory Default Configuration Trigger Mode Terminator Factory Default Configuration Setup Code *open Parameter code close Parameter code Product information 1. Serial Port Using Serial Portread moudle
More informationPOSSAFE LQ300 BARKOD OKUYUCU. Configuration Manual
POSSAFE LQ300 BARKOD OKUYUCU Configuration Manual System function setting Factory Default setting All scanners have a factory default settings, scan "Factory Default "bar code, will make the scanner all
More informationNT-1200 CCD Wired Barcode Scanner Overview
NT-1200 CCD Wired Barcode Scanner Overview Netum wired CCD Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. IP67
More information1D IMAGER MODELS - 7Ci, 7Di, D700
COMMAND BARCODES 1D IMAGER MODELS - 7Ci, 7Di, D700 This document pertains to the following 7Ci, 7Di, D700: The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series. Ci Di Model
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-M3 Quick Setup Guide This is a plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer to
More information510-2d Complete Configuration Guide Worth Data Inc. 05/2010
510-2d Complete Configuration Guide Worth Data Inc. 05/2010 i User Preferences Table 5-1. User Preferences Default Table Parameter Parameter Number Default Page Number User Preferences Set Default Parameter
More informationPureScan - ML1. Configuration Guide. Wireless Linear Imager Wireless Laser scanner - 1 -
PureScan - ML1 Wireless Linear Imager Wireless Laser scanner Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter 3 Chapter 2
More informationDisclaimer. Please read through the manual carefully before using the product and operate it
ONEBRAND,ONESOLUTI ON 2D Handhel dbar codescanner UserManual Disclaimer Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you
More informationTable of Contents Sleep Settings How to Configure the Scanner. 7 Chapter 2 System Setup
Table of Contents Chapter 1 System Information 1.1 Setup Scanner with PC 1.2 Setup Scanner with Mobile Device 1.3 Configure ios On-Screen Keyboard 1.4 Memory Mode 3 4 4 5 1.5 Sleep Settings 6 1.6 How to
More informationMK D Imager Barcode Scanner Configuration Guide
MK-5500 2D Imager Barcode Scanner Configuration Guide V1.4 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 2 Communication Interfaces...
More informationAPPENDIX E COMMAND BARCODES
APPENDIX E COMMAND BARCODES Scan command barcode(s) to quickly configure the CHS 7X or 7XRx. By default, the CHS is in HID mode as a Keyboard device. IMPORTANT! Make sure the CHS is not connected to a
More informationBARCODE SCANNER. Configuration Guide - 1 -
BARCODE SCANNER Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter 3 1.3 How to set up the parameter - II 4 Chapter 2 System
More informationFD-011WU. 2D Barcode Reader User Guide V1.6CC
FD-011WU 2D Barcode Reader User Guide V1.6CC Table of Contents 1 Getting Started... 1 1.1 Factory Defaults... 1 2 Communication Interfaces...2 2.1 TTL-232 Interface... 2 2.2 Baud Rate... 3 2.3 Data Bit
More informationNC-1200 BARCODE SCANNER. Configuration Guide - 1 -
NC-1200 BARCODE SCANNER Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter-i 3 1.3 How to set up the parameter II 4 1.4 Resetting
More informationGS500 2D Area-Imaging Scanner. User Manual
GS500 2D Area-Imaging Scanner User Manual Table of Contents Table Of Contents... 1 Chapter 1 Getting Started... 6 About This Guide... 6 Barcode Scanning... 6 Barcode Programming... 6 Factory Defaults...
More informationDS6707 Digital Imager Scanner. Product Reference Guide
Symbol DS6707 Product Reference Guide Manual DS6707 Digital Imager Scanner Product Reference Guide Table of Contents Revision History... iii About This Guide Introduction... xv Configurations... xv Chapter
More informationmarson MT8200S 2D Handheld Scanner User Manual V / 6 / 25 - I -
marson MT8200S 2D Handheld Scanner User Manual V1.1 2018 / 6 / 25 - I - Table of Contents 1 Gettting Started...1 1.1 Introduction...1 1.2 Configuring MT8200S...1 1.2.1 Barcode Configurability...1 1.2.2
More information2D Barcode Reader User Guide V 1.2.1
2D Barcode Reader User Guide V 1.2.1 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 1.4 Firmware Version Number... 3 2 Communication
More informationArea Imager Bar Code Scanner
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E SYMBOLOGY PROGRAMMING for POCKET SCANNERS Copyright @ 2017 This manual is copyrighted, with all right reserved. Under the copyright
More informationAPPENDIX C - SP2100 1D LASER Setup Barccodes
APPENDIX C - SP2100 1D LASER Setup Barccodes C.A - Method of programming the SP2100 1D Laser decoder with Setup Barcodes The decoder on the SP2100 1D laser scanner is the firware chip directly related
More informationRT206 User Guide. RT206 OEM 2d Scan Engine User Guide
RT206 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Programming... 2 Factory Defaults... 2 Custom Defaults... 3
More informationRT209 OEM 2d Scan Engine User Guide
RT209 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Scanning... 1 Barcode Programming... 1 Custom Defaults... 3
More information530-2D-USB 2D Scanner High Speed Imaging USB Bar Code Scanner
530-2D-USB 2D Scanner High Speed Imaging USB Bar Code Scanner Worth Data USB 2D Bar Code Scanner - Scan 1D & 2D Matrix Bar codes www.worthdata.com Owner s Manual Warning: This equipment generates, uses
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
More informationNCR Realscan 7837 High-Performance Scanners. User s Guide Issue A
NCR Realscan 7837 High-Performance Scanners User s Guide 497-0427357 Issue A Table of Contents Chapter 1 - Getting Started About This Manual... 1-1 Unpacking the Scanner... 1-2 RealScan 7837 High-Performance
More informationMD65xx Image Barcode Scanner
MD65xx Image Barcode Scanner User Manual Version: MD65xx_UM_EN_V1.1.1 Warning: Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. NOTICE: 1. All software, including
More informationXL D Barcode Scanner User's Manual V1.0
XL-3100 2D Barcode Scanner User's Manual V1.0 Table of Contents Revision History...-3- Chapter 1 Getting Started... 1 Introduction... 1 About This Guide... 2 Barcode Scanning... 2 Configuring the XL-3100...
More informationIPDA014-2D. Embedded 2D Barcode Scan Engine. User Guide
IPDA014-2D Embedded 2D Barcode Scan Engine User Guide 1 Table Of Contents Chapter 1 Getting Started...8 Introduction...8 About This Guide...8 Barcode Scanning...9 Barcode Programming...9 Factory Defaults...9
More information2 D C O N F I G U R A T I O N G U I D E B T S C A N N E R
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E B T S C A N N E R Copyright @ 2018 This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not,
More informationMS336 2D Imager Scanner
MS336 2D Imager Scanner Product Reference Guide Rev. C Preface About This Manual This manual explains how to install, operate and maintain the Unitech MS336 Imager Scanner. No part of this publication
More informationAdvanced Data Formatting (ADF) Programmer Guide
Advanced Data Formatting (ADF) Programmer Guide Advanced Data Formatting Programmer Guide 72E-69680-02 Revision A April 2009 ii Symbol DS3407 Product Reference Guide 2009 by Motorola, Inc. All rights
More informationMP720 Presentation Imager
MP720 Presentation Imager User Manual Version: MP720_UM_EN_V1.1.3 Notice Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware,
More information1. Factory Default Se ng (include below three steps)
2.4 GHz Wireless USB2.0 Wired Important Note: There will not have a beep sound for some of configura on.as long as light turns off a few seconds before you release the trigger bu on that means scanner
More information2D Scan Engine Confguration Guide. 2D Barcode Scanner Configration Guide
2D Barcode Scanner Configration Guide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM One Way Mode...6 (A3) USB Native Two Way Mode...6 (A4) USB
More informationCode Reader 2300/2600/3600/CR3600 DPM Configuration Guide
Code Reader 2300/2600/3600/CR3600 DPM Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired
More informationBarcode BC-29. Decoder & Platform. Programming Manual
Barcode BC-29 Decoder & Platform Programming Manual CONTENTS Getting Started...2 Setting Procedures...3 Setting Flow Chart......4 Group 1 : Multi Validation....5 Group 2 : Hold Time...6 Group 3: Scan Mode
More informationCR2300 CR2600 CR3600 (DPM)
CONFIGURATION GUIDE ENGLISH CR2300 CR2600 CR3600 (DPM) CONFIGURATION GUIDE: VERSION 12 SUPPORTED FIRMWARE: READERS 0956+, MODEM 2000+ RELEASE DATE: SEPTEMBER 2014 www.codecorp.com User Manuals YouTube.com/codecorporation
More informationXB-8200 Hand Free Area Image Scanner Configuration Guide
XB-8200 Hand Free Area Image Scanner Configuration Guide V1.3 Table of Contents Chapter 1 General Description... 1 Chapter 2 Introduction... 2 Chapter 3 User Preferences... 4 RETURN TO DEFAULT... 4 PARAMETER
More informationMD60xx Image Barcode Scanner
MD60xx Image Barcode Scanner User Manual Version: MD60xx_UM_EN_V1.1.2 Notice Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware,
More informationCode Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More informationLaser Barcode Scanner ARP Nr User s Manual
Laser Barcode Scanner ARP Nr. 853782 User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
More informationBD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide
BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide V 2.1 Table of Contents 1 Getting Started. 3 1.1 About This Guide.. 3 1.2 Barcode Scanning.. 3 1.3 Factory Defaults.. 3 1.4 Pairing Cradle 4 1.5
More information2D BARCODE SCANNER CA-SC-20200B
D BARCODE SCANNER CA-SC-B Quick Start Guide Getting Familiar with Your Device Thank you for choosing Capture Bar Code Scanner. All Devices deliver world-class performance for a broad range of applications
More informationSerial Programming Command Manual
Serial Programming Command Manual Disclaimer The information in this publication does not represent a commitment on the part of Newland. Newland shall not be liable for technical or editorial errors or
More informationConfiguration Guide. Code Reader C005435_02_CR1000_CR8000_ConfigurationGuide 1
Code Reader 1000/8000 Configuration Guide Code Reader 1000 Code Reader 8000 C005435_02_CR1000_CR8000_ConfigurationGuide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6
More informationOperating Manual BCS-1 *
Operating Manual BCS-1 * Barcode scanner Doc.Nr.:60000372 MANUAL BCS-1 NEX REV 0.0 EN 04.06.09 N.B. - 1 - List of Contents List of Contents...2 Introduction...3 BCS-1 * models available...4 Technical Data...5
More informationCode Reader 2300/2600 Configuration Guide
Code Reader 2300/2600 Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired with a CR2300/CR2600)
More informationCode Reader 4100 Configuration Guide
Code Reader 4100 Configuration Guide C006013_01_CR4100_ConfigurationGuide 1 Table of Contents Symbologies Aztec On - Default...5 (A1) Aztec Off...5 (A2) Aztec Inverse On...5 (A3) Aztec Inverse & Normal...5
More informationArea Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E Copyright @ 2017 This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
More informationLeitor Zebra LI
Leitor Zebra LI4278 Criado para uso diário e contínuo, o LI4278 oferece liberdade sem fio, compatível com Bluetooth. Oferece também uma melhor criptografia para uma segurança aprimorada e um melhor desempenho
More informationEl5220. Image Platform. User Manual
El5220 Image Platform User Manual Version: El5220 _UM_EN_V1.1.3 NOTICE Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware,
More informationCode Interleaved 2 of 5. Plessey Minimum And Plessey Maximum Length. Field Size/Char. Enabled.
Chapter 5: Configuration Decoded (HHP) Plessey Minimum And Plessey Maximum Length These parameters apply to Plessey bar codes.the length of a code refers to the number of characters (i.e., human readable
More informationCode Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More informationCONFIGURATION GUIDE ID-110
CONFIGURATION GUIDE ID-110 HSD 0320.011 / 09.17-V01de Table of content Bluetooth Settings 7 Bluetooth Radio Disconnect (Reconnect via Quick Connect Barcode) 7 () Bluetooth Auto Reconnect - Default 7 ()
More information5.22 Manage Triggers. Tap on the Hardware tab, and choose a GPS hardware port and the appropriate Baud rate.
Manage Triggers Tap on the Hardware tab, and choose a GPS hardware port and the appropriate Baud rate. Windows Mobile 6 automatically manages access to the GPS receiver. However, some programs may not
More informationUSER MANUAL. ZKB200 Handheld Image Scanner. Version:1.0 Date: April, 2018
USER MANUAL ZKB200 Handheld Image Scanner Version:1.0 Date: April, 2018 Notice Ensure that the optional DC adapter works at +5 VDC, especially for the RS-232 interface cable. 1. All software, including
More informationWireless Laser Barcode Scanner User Manual V.D1508
Wireless Laser Barcode Scanner User Manual V.D150 7 1 2 2 1 0 0 0 0 1 Thank you for choosing our company s product.to have a better operating experience,please read this manual carefully. Packing list:
More informationAdvanced Handheld High-Speed Laser Scanner
GLLS 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2013/05/02 Initial release 1.1 2013/8/26 Made
More informationSymbol CS3000 Series Scanner Product Reference Guide
Symbol CS3000 Series Scanner Product Reference Guide Symbol CS3000 Series Scanner Product Reference Guide 72E-136088-01 July 2010 ii Symbol CS3000 Series Scanner Product Reference Guide 2010 by Motorola,
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2016 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationAdvanced Handheld High-Speed Laser Scanner
GLLS 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2015/03/03 Initial release 1.1 2015/04/15 Added
More informationMD22xx Barcode Scanner
MD22xx Barcode Scanner User Manual Version: MD2250_UM_EN_V3.2.18 NOTICE Ensure that the optional DC adapter works at +5 VDC, especially for the RS-232 interface cable. 1. All software, including firmware,
More information2D Hand-held Barcode Scanner User Guide
2D Hand-held Barcode Scanner User Guide 2 / 66 Version History Version Description Date V1.0 Initial release. 2016-11-10 V1.01 Add Data Matrix and PDF417 2017-04-25 3 / 66 Content Chapter 1 Getting Started...
More informationNLS-EM3070. OEM Scan Engine. User Guide
NLS-EM3070 OEM Scan Engine User Guide Disclaimer 2013-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationMP168 Screen Barcode Image Platform
MP168 Screen Barcode Image Platform User Manual Version: MP168_UM_EN_V1.1.1 Notice Ensure that the optional DC adapter works at + 5 VDC, especially for the RS-232 interface cable. 1. All software, including
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2018 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationWired Laser Barcode Scanner User Manual V:1509
Wired Laser Barcode Scanner User Manual 7 1 2 1 1 0 0 0 0 4 V:1509 Thanks you for choosing our company s product. To have a better operating experience, please read this manual carefully. Reading Angle
More informationCR40 Bluetooth Ring Scanner User Manual
CR40 Bluetooth Ring Scanner User Manual Version: CR40_UM_EN_V1.1.1 Notice CR40 is a Bluetooth Ring Scanner. Before operating scanner, please make sure you carefully read the following information to ensure
More information2D/1D IMAGER MODEL - D760, S860
COMMAND BARCODES 2D/1D IMAGER MODEL - D760, S860 This document pertains to the following D760, S860: Model D760 Construction Orange Model S860 Black D760 Safety Green D760 Utility Gray TABLE OF CONTENTS
More informationLS Product Reference Guide
LS 1006 Product Reference Guide LS 1006 Product Reference Guide 70-33807-01 Revision A September 1998 2 Symbol Technologies, Inc. One Symbol Plaza, Holtsville N.Y. 11742 LS 1006 Keyboard Wedge Scanner
More information2D Image Barcode Scanner Use Manual V1.0
2D Image Barcode Scanner Use Manual V1.0 Contents Chapter 1 Factory Default... 3 1. Factory Default... 3 Chapter 2 Interface... 4 1. RS-232...... 4 1.1 Baud Rate...... 4 1.2 Parity Check & Stop Bit & Data
More informationConfiguration Manual PULSAR C CCD SCANNER. Table of Contents
Table of Contents PULSAR C CCD SCANNER Configuration Manual Metrologic Instruments GmbH Dornier Strasse 2 82178 Puchheim Germany Tel +49 89 890190 Fax +49 89 89019200 www.europe.metrologic.com Metrologic
More informationCode Reader 900FD Configuration Guide
Code Reader 900FD Configuration Guide 1 Table of Contents Reader Settings Save Settings...5 (A1) Reader ID and Firmware Version... 5 (A2) Feedback Settings Beep On...5 (A3) Beep Off...5 (A4) Targeting
More informationAllen-Bradley. Programming Guide. Hand-Held Cordless Bar Code Scanners. (Cat. Nos HCG-4 and 2755-HCG-7) AB PLCs
Allen-Bradley Hand-Held Cordless Bar Code Scanners Programming Guide (Cat. Nos. 2755-HCG-4 and 2755-HCG-7) AB PLCs Important User Information The illustrations, charts, sample programs and layout examples
More informationSCANNING MADE SIMPLE. EM3296 OEM scan engine user guide
SCANNING MADE SIMPLE EM3296 OEM scan engine user guide Disclaimer 2016-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product
More informationEM3296. OEM Scan Engine User Guide
EM3296 OEM Scan Engine User Guide Disclaimer 2016-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationUser s Manual. Xi3000 Scanner. Table of Contents
Xi3000 Scanner User s Manual Table of Contents Restore Default Settings... 1 Exit Setup without Changes... 1 Configure Through RS232... 1 List Setting... 1 Buzzer Settings... 2 Reading Redundancy Setting...
More informationScanning with Simplicity
Scanning with Simplicity SAVEO-RV2-Z12D User Guide * shown with Motorola MOTO G 6th Generation info@saveoscan.com www.saveoscan.com US PH: +1 720 257 7070 UK PH: +44 208 0998071 Contents 1. Introduction.
More informationBarcode Scanner. Model no. NuScan User s Manual
Barcode Scanner Model no. NuScan 5000 User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
More informationNLS-EM3095 Embedded 2D Barcode Scan Engine. User Guide
NLS-EM3095 Embedded 2D Barcode Scan Engine User Guide Disclaimer 2013 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate
More information1D/2D IMAGER MODELS - 7Qi, 7Xi, D750
COMMAND BARCODES 1D/2D IMAGER MODELS - 7Qi, 7Xi, D750 This document pertains to the following 7Qi, 7Xi, D750: Model P/N 7Qi Blue 8550-00081 7Qi Gray 8550-00078 7Qi Green 8550-00090 7Qi Red 8550-00080 7Qi
More information2D barcode scanner User Manual
2D barcode scanner User Manual V1.1 2013/06/08 Table of Contents Introduction... 4 Interface Settings... 4 RS232 Serial Port... 4 USB Interface Settings... 5 RS232 Settings... 6 Keyboard Settings... 9
More informationOperating Manual BCSi-1 *
Operating Manual BCSi-1 * Barcode scanner Doc.Nr.:60000340 MANUAL BCSI-1 REV 1.7 EN.DOC 19.12.08 A.J. - 1 - List of Contents List of Contents...2 Introduction...3 BCSi-1 * models available...4 Technical
More informationMD22xx Barcode Scanner
MD22xx Barcode Scanner User Manual Version: MD22xx_UM_EN_V3.2.17 NOTICE Ensure that the optional DC adapter works at +5 VDC, especially for the RS-232 interface cable. 1. All software, including firmware,
More informationMP80xx Image Platform
MP80xx Image Platform User Manual Version: MP80xx_UM_EN_V1.1.3 NOTICE Warning: Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface cable. 1. All software, including firmware,
More informationTable of contents. Change scanner settings Factory default settings Default message format Programming flow chart
Table of contents Change scanner settings Factory default settings Default message format Programming flow chart 1. General 1.1 Open programming mode or Close programming mode with update 1.2 Close programming
More informationWireless Laser Barcode Scanner ils 6300BU. User s Manual
Wireless Laser Barcode Scanner ils 6300BU User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
More informationSIMATIC Ident Handheld reading systems SIMATIC MV325 Configuration guide Compact User Manual
SIMATIC Ident Handheld reading systems Compact User Manual Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More information