SYSTEM 6 handles. SYSTEM 6 handles.
|
|
- Lucinda Warner
- 6 years ago
- Views:
Transcription
1 SYSTEM 6 handles. SYSTEM 6 handles. 284 Ergonomic multi-component handle with roll-off protection. With 6 mm hex retainer. Enables adjustable blade lengths from mm. Versatile for general applications in the workshop and factory SB 284 Blister packed Available from June 2014 NEW SYSTEM 6 Topra 2K pistol ratchet. For all SYSTEM 6 reversible blades. Complete range of all SYSTEM 6 reversible blades can be used. Ball latch for a secure hold of all reversible blades. Ergonomic pistol handle for high torques. Axial power transmission without breakdown torque. Maximum transmission of force due to soft and hard zones which are adapted to the users palm. Finely serrated ratchet with 72 teeth enables 5 switching angle: guarantees precise work when things get tight. Low range of motion for quick work, e.g. in 2-finger access. Turbo wheel for extremely fast turning of metal screws and bolts. Fast and powerful fastening even of larger screws, e.g. M8 and M10. Thus, any screw up to M10 can be moved using SYSTEM 6 reversible blades ESD SYSTEM 6 SoftFinish -telescopic ESD handle. Dissipative handle, ESD-safe. Ergonomic multi-component handle with roll-off protection. With 6 mm hex retainer. Enables adjustable blade lengths from mm. Surface resistance ohms. Standards: IEC For working on electrostatically sensitive components Safety Notice: Wiha ESD screwdrivers are non-insulated, therefore not suitable for working on live parts. 481 M01 SYSTEM 6 Magnetic handle. With built-in magnetiser/ demagnetiser. With built-in magnetiser/ demagnetiser. With hex bolster for additional torque. Use in combination with SYSTEM 6 reversible blades. For magnetising/ demagnetising SYSTEM 6 reversible blades
2 Wiha SYSTEM 6. The space-saving all-rounder. SYSTEM 6 reversible blades. SYSTEM 6 reversible blades. 284 SYSTEM 6 slotted reversible blade SYSTEM 6 combined slotted-phillips reversible blade. 284 SYSTEM 6 combined ball end hex - hex reversible blade. The ball end enables the user to work at angles up to PH PH PH NEW U 106 SYSTEM 6 hex nut driver blade. For hex nuts. Titanium silver, stamped tip sizes. 284 SYSTEM 6 Phillips reversible blade PH1 PH PH2 PH SYSTEM 6 Pozidriv reversible blade PZ1 PZ PZ2 PZ SYSTEM 6 TORX reversible blade U T6 T T7 T T10 T T20 T T30 T Suitable for every use: the blades can be quickly combined, extended and interchanged. 112
3 SYSTEM 6 reversible blades. SYSTEM 6 reversible blades. 284 SYSTEM 6 TORX Tamper Resistant reversible blade. For TORX screws with locking pin. With borehole in the blade tip T6H T8H T7H T9H T10H T15H T20H T25H T30H T40H SYSTEM 6 Tri-Wing reversible blade. For Tri-Wing security screws TW0 TW TW2 TW TW4 TW SYSTEM 6 Torq-Set reversible blade. For Torq-Set security screws TS2 TS TS6 TS SYSTEM 6 bit holder. Suitable for C 6.3 and E 6.3 (1/4") bits. Chrome-vanadium steel, through hardened. Titanium silver. Bit retainer made of stainless steel with integrated permanent magnet / SYSTEM 6 adapter blade. Suitable for 1/4" square sockets. Chrome-vanadium steel, through hardened. Titanium silver. 1/4" square drive with ball retainer / NEW Torque TR / Topra 2K universal bit holder. Accommodates 1/4" bits. High quality CVM steel. For applications where recommended torque settings are important / NEW Torque TR / Topra 2K adapter blade. Suitable for 1/4" respc. 3/8" square sockets. High quality CVM steel. For controlled turning of screws with nuts at a prescribed torque. U SYSTEM 6 extension blade. Suitable for blades. Chrome-vanadium steel, through hardened. Titanium silver. Extends all SYSTEM 6 blades up to 100 mm / / Did you already know? TORX Tamper Resistant screwdrivers can also be used for TORX screws, but not vice versa. NEW SYSTEM 6 adapter Topra 2K Insertion of SYSTEM 6 blades. High quality CVM steel
4 Wiha SYSTEM 6. The space-saving all-rounder. SYSTEM 6 Starter sets. SYSTEM 6 sets. 281 T6 SYSTEM 6 reversible blades set, 6 pcs. Slotted/ Phillips/ hex/ ball end hex. Versatile and space-saving, it fits in every toolbox. Series T T11 SYSTEM 6 reversible blades set, 11 pcs. Slotted/ Phillips/ Pozidriv/ TORX / hex/ ball end hex. Series T PZ1 - PZ2 284 T10 - T15 T20 - T25 T30 - T T6 01 SYSTEM 6 reversible blades set, 6 pcs. Versatile and space-saving, it fits in every toolbox. Series T PZ1 - PZ2 284 T10 - T15 T20 - T Suitable for every use: the blades can be quickly combined, extended and interchanged. U
5 SYSTEM 6 sets. SYSTEM 6 professional sets. U106 T8 SYSTEM 6 nut driver set, 8 pcs. Nut driver. Chrome-vanadium molybdenum steel, through hardened. Titanium silver, stamped tip sizes. ClickStop ball clamp guarantees secure hold and a quick nut driver change. Series U106 T8 1 U B11 SYSTEM 6 reversible blades set, 11 pcs. Slotted/ Phillips/ Pozidriv/ TORX / hex/ ball end hex. Set in a rigid box for professional applications. Series B PZ1 - PZ2 284 T10 - T15 T20 - T25 T30 - T U106 T12 SYSTEM 6 nut driver set, 12 pcs. Nut driver. Chrome-vanadium molybdenum steel, through hardened. Titanium silver, stamped tip sizes. ClickStop ball clamp guarantees secure hold and a quick nut driver change. 281 B11 01 SYSTEM 6 reversible blades set, 11 pcs. Tri-Wing / Torq-Set / TORX Tamper Resistant. Set for safety screws in a rigid box. Series U106 T12 1 U Series B TW0 - TW1 TW2 - TW3 TW4 - TW5 284 TS2 - TS4 TS6 - TS8 284 T6H - T8H T7H - T9H T10H - T15H T20H - T25H T30H - T40H 115
6 Wiha SYSTEM 6. The space-saving all-rounder. SYSTEM 6 display. SYSTEM 6 ESD set. 284 VB1 SYSTEM 6 display. Acryl glass display with 85 pieces. Size: 22 x 19 x 35 cm (WxDxH). Series VB xSYSTEM 6 SoftFinish -telescopic handle 284 4x x4.0 7x5.5 7x xPH xPZ x2.5 7x3 7x4 7x xT10 7xT20 284ESD T6 01 SYSTEM 6 ESD set of reversible blades, 6 pcs. Slotted/ Phillips/ hex/ ball end hex. Packaging: SYSTEM 6 SoftFinish -telescopic ESD handle. ESD-safe (dissipative), surface resistance ohms. Blister packed. Series ESD T ESD SYSTEM 6 SoftFinish -telescopic ESD handle press Press sleeve: => Blade lock is released mm Press and hold down sleeve: =>Set desired blade length 3 Release sleeve: =>Blade is held securely 116
7 SYSTEM 6 Magnetic set. SYSTEM 6 Topra 2K sets. 481 T6 SYSTEM 6 reversible blades set, 6 pcs. Slotted/ Phillips/ hex/ ball end hex. SYSTEM 6 Magnetic handle. With built-in magnetiser/ demagnetiser. Versatile and space-saving, it fits in every toolbox. Series T M01 SYSTEM 6 Magnetic handle NEW 2820 B11 SYSTEM 6 reversible blades set, 11 pcs. Slotted/ Phillips/ Pozidriv/ TORX / hex/ ball end hex. Available from June 2014 SYSTEM 6 Topra 2K pistol ratchet. Ergonomic pistol handle for high torques. Maximum transmission of force due to soft and hard zones which are adapted to the users palm. Finely serrated ratchet with 72 teeth enables 5 switching angle: guarantees precise work when things get tight. Low range of motion for quick work, e.g. in 2-finger access. Set with pistol handle and blades in a rigid box for professional use. Series B SYSTEM 6 Topra 2K pistol ratchet universal bit holder PZ1 - PZ2 284 T10 - T15 T20 - T25 T30 - T Magnetising Demagnetising SYSTEM 6 Magnetic. The ideal set for magnetising or demagnetising screwdriver blades and similar tools made of steel. 117
8 Wiha SYSTEM 4. Ideal for precision work. Colour-coded ChromTop tips for maximum clarity. Due to its versatility and quality the Wiha SYSTEM 4 is a reversible blade system that convinces every user. range provides the right model for every application. All reversible blades are made of tips guarantee a perfect fit every time. Just choose from the SYSTEM 4 products for the relevant tool. Following handles are offered. SoftFinish telescopic handle. SoftFinish telescopic ESD handle. Each with adjustable blade We offer SYSTEM 4 sets in compact Convincing variety and quality. SYSTEM 4 a real multi-tasker. Wiha SYSTEM 4. blade system almost every application chrome-plated 18 mm min. tips ensure a perfect fit every time 90 mm max. The ClickStop ball clamp in each telescopic handle allows 24 different visible blade lengths between 18 and 90 mm in 3 mm increments. 118
9 SYSTEM 4 handles. SYSTEM 4 reversible blades.. Ergonomic multi-component handle with roll-off protection. With 4 mm hex retainer for all SYSTEM 4 blades. Enables adjustable blade lengths from mm. Ideal for all precision work in the fields of electronics and mechanics SYSTEM 4 slotted reversible blade SYSTEM 4 slotted Phillips reversible blade. 2691ESD SYSTEM 4 SoftFinish -telescopic ESD handle. Dissipative handle, ESD-safe. Ergonomic multi-component handle with roll-off protection. With 4 mm hex retainer for all SYSTEM 4 blades. Enables adjustable blade lengths from mm. Surface resistance ohms. Standards: IEC For working on electrostatically sensitive components Safety Notice: Wiha ESD screwdrivers are non-insulated, therefore not suitable for working on live parts PH PH PH SYSTEM 4 Phillips reversible blade PH000 PH PH0 PH SYSTEM 4 Pozidriv reversible blade PZ0 PZ
10 Wiha SYSTEM 4. Ideal for precision work. SYSTEM 4 reversible blades. SYSTEM 4 reversible blades. 269 SYSTEM 4 TORX reversible blade T1 T T3 T T5 T T6 T T7 T T10 T T15 T SYSTEM 4 nut driver. For hex nuts. For hex nuts SYSTEM 4 combined ball end hex - hex reversible blade. through hardened, chrome-plated. The ball end enables the user to work at angles up to U SYSTEM 4 bit holder. Suitable for C 4 (4 mm) bits. Chrome-vanadium steel, through hardened, electro-plated U Practical and compact: select the appropriate blade insert it into the handle that s all there is to it! 120
11 SYSTEM 4 sets. SYSTEM 4 sets. 269 T4 SYSTEM 4 reversible blades set, 4 pcs. Slotted/ Phillips. through hardened, chrome-plated. Series T PH PH PH1 269 T11 SYSTEM 4 reversible blades set, 11 pcs. Slotted/ Phillips/ hex/ ball end hex. through hardened, chrome-plated. Series T T6 SYSTEM 4 reversible blades set, 6 pcs. Slotted/ Phillips. through hardened, chrome-plated. Series T T6 01 SYSTEM 4 reversible blades set, 6 pcs. Phillips/ TORX. through hardened, chrome-plated. Series T T3 - T4 T5 - T6 T8 - T10 121
12 Wiha SYSTEM 4. Ideal for precision work. SYSTEM 4 sets. SYSTEM 4 sets in plastic boxes. 269 T11 01 SYSTEM 4 reversible blades set, 11 pcs. Slotted/ Phillips/ TORX / hex/ ball end hex. Series T T6 - T8 T7 - T EB53 SYSTEM 4 reversible blades set, 5 pcs. Slotted/ Phillips. High quality CVM steel, Ideal for all precision work. Delivery in a rigid, arrangeable plastic box. Series EB press mm Press sleeve: => Blade lock is released Press and hold down sleeve: =>Set desired blade length 269 EB95 SYSTEM 4 reversible blades set, 9 pcs. Slotted/ Phillips/ TORX. High quality CVM steel, Ideal for all precision work. Delivery in a rigid, arrangeable plastic box. Release sleeve: =>Blade is held securely Series EB T6 - T8 T7 - T9 T10 - T15 122
13 Safety Notice: Wiha ESD screwdrivers are non-insulated, therefore not suitable for working on live parts. SYSTEM 4 display and ESD set. SYSTEM 4 ESD sets. 269 VB1 SYSTEM 4 display. Acryl glass display with 85 pieces. Series VB xSYSTEM 4 SoftFinish -telescopic handle 269 4x x1.5 7x xPH000 7xPH x1.5 7x2 7x2.5 7x xT6 7xT7 7xT EB16 ESD SYSTEM 4 ESD bit set, 16 pcs. Mixed sets. SYSTEM 4 SoftFinish -telescopic ESD handle. ESD-safe (dissipative), surface resistance ohms. Enables adjustable bit holder blade length. Standards: DIN 3126, ISO 1173, style C 4. IEC Case: No danger to electronic components with use of ESD-safe materials. Tough, space-saving metal box. Bit set suitable for smallest screws with electronic components. Flexible working via adjustable blade length and rapid replacement of bit inserts. Series EB16 ESD ESD 1xSYSTEM 4 SoftFinish -telescopic ESD handle U xSYSTEM 4 bit holder U750 1x2.0 1x3.0 U751 1xPH000 1xPH00 1xPH0 1xPH1 U757 1xT3 1xT4 1xT5 1xT6 1xT8 U753 1x0.9 1x1.3 1x T11 ESD SYSTEM 4 ESD reversible blades set, 11 pcs. Slotted/ Phillips/ TORX / hex/ ball end hex. SYSTEM 4 SoftFinish -telescopic ESD handle. ESD-safe (dissipative), surface resistance ohms. In a roll-up pouch made of ESD-safe material. Series T11 ESD ESD SYSTEM 4 SoftFinish -telescopic ESD handle T6 - T8 T7 - T EB26 ESD SYSTEM 4 ESD bit set, 26 pcs. Mixed sets. Series EB26 ESD ESD 1xSYSTEM 4 SoftFinish -telescopic ESD handle U xSYSTEM 4 bit holder U750 1x1.5 1x2.0 1x3.0 1x4.0 U751 1xPH000 1xPH00 1xPH0 1xPH1 U757 1xT3 1xT4 1xT5 1xT6 1xT7 1xT8 1xT9 1xT10 U753 1x0.7 1x0.9 1x1.3 1x1.5 1x2.0 1x2.5 1x3.0 1x
Wiha MaxxTor Bits. Next Generation Wiha Bit System. New er 29er. BitBuddy
Wiha MaxxTor Bits Next Generation Wiha Bit System New 2012 49er 29er BitBuddy MaxxTor-Bits Maximum service life Maximum torsion MaxxTor Family Maximum torsion zone optimised and adapted for each drive
More information[2] Precision Tip 4. Manufactured with heavy-duty, high-grade steel
Irwin impact 1870983 double-ended bits [4] 1. DoubleLok Technology Ensures both ends of bit lock securely in impact drivers and quick-change chucks, enabling use of two tips from one bit for added convenience
More informationScrewdriving Tools for the Aerospace Segment
Screwdriving Tools for the Aerospace Segment Content Screwdriver Bits 4 Bitholders and Adaptors 28 Combination ratchet wrenches 32 Ratchets 36 Torque Tools 62 Screwdrivers 66 Kraftform Kompakt Tools 79
More informationFASTener DRIVES & screwdriving
FASTener DRIVES & screwdriving 17 IMPACT PERFORMANCE SERIES FOR MAXIMUM DURABILITY AND LONG LIFE Based on the increasing popularity and frequency of use of impact drivers on the jobsite, IRWIN offers a
More information4 IMPACT SOCKETS, BITS
IMPACT SOCKETS, BITS IMPACT SOCKETS, ADAPTOS AND SETS PAGE 58 BITS AND ACCESSOY TOOS PAGE 66 IMPACT DIVE AND SET PAGE 7 IMPACT Sockets, Machine actuated IMPACT Sockets, Machine actuated. STAHWIE IMPACT
More informationINFO. VDE screwdrivers 1000 V. VDE 2-component screwdriver with PZ slot profile. Screwdriver set with PZ slot profile
INFO Screwdriver range Industrial quality Screwdriver range according to the new Norm IEC 0900:00. All blades are made of high quality Molybdenum vanadium steel, black, redcovered, Polypropylen moulded.
More informationLetter & Number Stamps. 6 Wheel Number Punch PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR. Hand Stamp Sets
560 PUNCHES & STAMPS Hand Stamps Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. Positive Indent (Standard) Hand Stamp Sets Set Description
More informationGET PROFESSIONAL, NOW!
NEUE PRODUKTE GET PROFESSIONAL, NOW! 3812-0576 ALLE WERKZEUG-SETS: 3812-0577 WE SUPPORT THE SPORT ALL CATEGORIES COMBINATION SPANNER DIN 3113 form A/ISO 7738 form A 5,5 mm 3812-0277 6 mm 3812-0278 7 mm
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationSockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
More informationPT 0606 Price Revision, May 2013 INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS
PT 0606 Price Revision, May 203 a division of The Hillman Group Canada ULC Quality Tools INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS Pro-Tip Manufacturing, a division of H. Paulin
More informationData sheet. HDC insert HDC HQ 7 FC
The HQ series - big features in a compact design The electrical values speak for themselves. The standard HE crimp contacts can also be used here. The wire connection level is designed as a crimp contact
More informationSockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
More informationSection 9. Corporation EDI
Corporation Strip Socket Storage Racks See page 11 Stubby Clips See page 11 SAE 12-Point Socket Adapter Set See page 1 Reversible Ratcheting Kit See page 3 Empty Plastic Socket Holder See page 11 Section
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationData sheet. HDC insert HDC HQ 5 FC
A small unit that packs a big punch. The electrical values speak for themselves. Proven HE crimp contacts can also be used here. Number of poles: 5 (+PE) Rated current: 16 A Rated voltage: 250 V Rated
More informationZyklop. The next generation!
Zyklop. The next generation! More and more, users are demanding tools that are suitable for confined working spaces. Machinery and workpieces are becoming increasingly more compact, and this means that
More informationSOCKET WRENCH SET SOCKET WRENCH SET SOCKET WRENCH SET SOCKET SET SOCKET WRENCH SET IMPACT SOCKET SET SOCKET WRENCH SET SOCKET WRENCH SET
SOCKET & SOCKET B-05-035 0347-0 75 pcs DR Socket Wrench Set SAE & MM : 12 pc 6pt 1/4 SAE Socket:5/32-1/2, 3 pc 8 pt 1/4 SAE Socket: 1/4-3/8, 13 pc Metric Socket: 4-13mm, 3 pc 3/8 SAE Socket: 7/16, 1/2,
More informationHIT E VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments. Become a MATADOR.
VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments Become a MATADOR. VARIO Workshop Trolley xccasca info From an idea to a new standard. VARIO. Our new top modell VARIO is entirely newly
More informationDatasheet RS Pro Tool Cabinet & Tool Module Kit
Datasheet RS Pro Tool Cabinet & Tool Module Kit RS Stock No: 125-3046 Central locking system Recessed work-top Low friction telescopic ball bearing slides, fully accessible drawers Side holder for spray
More informationSTAHLWILLE spanners. STAHLWILLE spanners
STAHLWILLE spanners Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact
More informationPT 0606 October, 2007 INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS
PT 0606 October, 2007 ISO 900:2000 Certified Division of H. Paulin & Co. Limited Quality Tools INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS Pro-Tip Manufacturing, a division of H.
More information. 0 Insert Made Cat.-Nr
Hand tools. Insert Made Cat.-Nr. 963-969 Bicolour insert made of polyethylene (PE), colour black/blue. Resistant against most oils and chemicals thanks to closed-cell design. Contrasting colour and precisely
More informationSpanners wrenches. Handsaws 1
Spanners wrenches sockets Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX SPANNERS DOUBLE open DOUBLE RING RATCHET wrenches KRT501001 -> KRT501011 COMBINATION KRT501101 -> K R T501111 OPEN/RATCHET
More informationPIPE MANUFACTURERS LIMITED
PROMOTIONAL CATALOGUE a lot more than just pipes PIPE MANUFACTURERS LIMITED Mechanic s Tool Kit 60pc Model No. 679259 5 Tool Inserts & Metal Tray1/2 DRV Socket Set 8-32mm (Duometric) Combination Spanner
More informationPurchase an Interchangeable Head Torque Wrench and receive a FREE Ratcheting Square Drive Head.
Sales Blaster Purchase an Interchangeable Head Torque Wrench and receive a FREE Ratcheting Square Drive Head. Interchangeable Head Torque Wrenches These interchangeable torque wrenches are designed for
More informationPROMOTION ENDS 31 MARCH
PROMOTION ENDS 31 MARCH 2018 QW BACK TO WORK 12 PC METRIC Reversible Combination Ratcheting Wrench Set SPEED // STRENGTH //ACCESS //RANGE 12 PC METRIC Open End Ratcheting Set + BONUS SPEAKER 8mm-19mm 239.00
More informationFind out our entire range on clas.com CONTENTS & INSERTS DYNAMOMETRY TIGHTENING KEYS RATCHETS STORAGE HAMMERING TOOS ELECTRONIC HANDTOOLS
SELECTION HANDTOOLS HANDTOOLS 63 68 72 88 90 STORAGE CONTENTS & INSERTS RATCHETS DYNAMOMETRY TIGHTENING KEYS 92 96 109 112 PLIERS BITS HAMMERING TOOS ELECTRONIC Find out our entire range on clas.com 62
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationTechnical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
More informationWolf Laboratories Limited
Wolf Laboratories Limited www.wolflabs.co.uk Tel: 01759 301142 Fax:01759 301143 sales@wolflabs.co.uk Use the above details to contact us if this literature doesn't answer all your questions. Pricing on
More informationHex And Sex Boxed Set By Milly Taiden
Hex And Sex Boxed Set By Milly Taiden SAE/Metric Folding Hex Key Set (17-Piece) - The Home Depot - Visit the Home Depot to buy Husky 17-Piece Folding Hex Key Set HFHKSM17PC ASCII Character Set and Hexadecimal
More informationNEW NEW PRODUCT PRODUCT 188, 59,50
Art. 1052 Aluminium type universal tool case 1/4" + 3/8", 163-pcs. - Wide range of tools with cordless bit screwdriver - Combination wrench 8-19 mm - Cordless bit screwdriver 7.2 V / 1300 mah - Hexagonal
More informationService: SLR Laboratory Stirrer glass made of ideas. Service Instructions for the SLR Laboratory Stirrer
Service Instructions for the SLR Laboratory Stirrer SLR Service eng.doc 17 Version: 03.04.2001 Contents Page Contents... 18 General way of proceeding... 19 1 Safety information... 20 2 Introduction...
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationHANDTOOLS CATALOGUE. Shaping tools for you
TOOLS HANDTOOLS CATALOGUE Shaping tools for you P R I C E L I S T O K 0 / AUGUST RANGE INSIDE GLUE GUN UTILITY KNIFE RATCHET SCREW DRIVER CUTTING WHEEL TOOL POUCH AND BAG 7DRAWERS WORKSTATION Price List
More informationTransparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
More informationTool cabinet with double door + 4 drawers
L3 529, L1 L4 L5 L2 Art. 2906 Tool cabinet with double door + 4 drawers - With robust plastic storage surface - Hard plastic edge protection - 4 ball bearing drawers with full-extension - Central lock
More informationMOBILE WORKSHOP SOLUTIONS
MOBILE WORKSHOP SOLUTIONS 2 4 Pro-line 300 6 Pro-line 400 8 Pro-line 200 10 Basic-line 12 Accessories 14 COMPLETO trays 15 COMPLETO Serie 4900 29 COMPLETO EVA3 Serie 4903 36 COMPLETO EVA Serie 4902 kraftwerktools.com
More informationContents: Contents: Contents:
JTC-39312 TOOL KIT JTC-39313 TOOL KIT JTC-5641+496 18 pcs combination wrench: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24. 9 pcs box wrench: 6 x 7, 8 x 9, 10 x 12, 11 x 13, 12 x
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationBest of Accessories. April June Bosch Customer Service Content to be adapted locally. Dealer contact details
Best of Accessories April June 2014 Bosch Customer Service 095 81 Promotions This number connects you to the Bosch Customer Service Team. It is there to answer your questions about technical matters and
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationRider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA
AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationExtension Extension
Handtools Gedore Sockets Gedore Socket sets Gedore Sockets 1/4", hexagon Type 20 Square drive according to DIN 3120 C6,3 Size 232004 4 mm 232030 Reducer, vall locking device 232005 5 mm 1/4 fem. 3/8 male.
More informationWorking under tension V Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Working under tension 1000 V Tool cases Hard top tool cases, Leather tool cases...convincing solutions Tool cases 1000 V Tool case 1000 V made of plastic, complete with 3/8 tools. Dimension: 450 x 340
More informationMark like a Professional. Table marking system NetMarker
Mark like a Professional Table marking system NetMarker Mark like a Professional NetMarker The compact table marking system The innovative, network-compatible CNC table marking system NetMarker excels
More information11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
More informationTOOL STORAGE 1.800.762.6002 www.ktoolinternational.com Service Carts KTI75146 4 Drawer Locking Service Cart 500 lb. load capacity Ball bearing drawer slides. Drawer liners for all drawers and trays 5 Heavy-duty
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationEmergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More information5 Fieldbus Technology
5 Fieldbus Technology Ex e / Ex i 10922E00 The s Ex e/ex i connect intrinsically safe Foundation Fieldbus H1 or Profibus PA field devices to a non-intrinsically safe / Ex e trunk. Up to four intrinsically
More informationGeneral Catalog Unlocking the full potential of your machines
General Catalog Unlocking the full potential of your machines 182 EROWA ITS Compact Combi Three in one Seamless integration into the existing ITS system. The ITS Compact CombiChucks have the same mounting
More information1000 V cable knife. PMMI International Ltd. Toll Free: Local: With straight blade
With straight blade 000 V cable knife 2 0042 000 V cable knife With straight blade and insulated blade back 2 0043 With hook-shaped blade Blade length 35 mm 000 V cable knife 2 0044 000 V cable knife 2
More informationLIGHT SCREENS Catalog Safety Supply Maximum Type Model Page Category Resolution Voltage Range. Page Point Systems. Page 42 4.
Catalog Safety Supply Maximum Type Model Page Category Resolution Voltage Range Standard Systems 14 & 30 mm Cascade Systems Page 20 4 14 & 30 mm 24V dc 18 m Grid & Point Systems 300 to 584 mm (beam spacing)
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationTo connect the AC adapter:
Replacing the AC Adapter Replacing the AC Adapter 3 Plug the power cord into a wall outlet. The power indicator turns on. To connect the AC adapter: Connect the power cord to the AC adapter. Power indicator
More informationTorque Validation Module (TVM)
Assembly Technologies Torque Validation Module (TVM) User Manual Important Safeguards For your protection, please read these instructions completely, and keep this manual for future reference. Carefully
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More information2-JAW PARALLEL GRIPPERS INSTALLATION SIZE GEP2013
-JAW PARALLEL GRIPPERS INSTALLATION SIZE GEP0 PRODUCT SPECIFICATIONS Installation size GEP0 / -Jaw Parallel Grippers / electrical / Grippers TECHNICAL DATA Gripping force diagram Forces and moments [N]
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationBetter hand tools - a simple philosophy.
PRODUCT CATALOGUE Better hand tools - a simple philosophy. Having left home at 16, my grandfather travelled the world for many years before settling in Toronto, Canada. During his travels, he met a wide
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationTools for General Repairs
10 10-01 Magnetic Lifter (flexible) KL-0126-2 KL-0126-204 KL-0126-203 KL-0126-202 Magnetic Tools (Telescopic Design) KL-0126-205 KL-0126-206 KL-0126-212 KL-0126-20 Magnetic Lifter KL-0126-2 Magnetic Lifter
More informationEVERYTHING FOR YOUR CAR CAR & CO
EVERYTHING FOR YOUR CAR CAR & CO 56-0407100 58-8106022 56-0407110 / Bluetooth hands-free equipment FREE DRIVE: Bluetooth version 4.0, range: approx. 10 m, high-performance rechargeable battery, Micro-USB
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationDatamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
More information3RG7 Opto-BERO Photoelectric Proximity Switches
Plastic fibre-optic conductors 0 0 30 20 0 Typical configuration of switching zones (fibre type 3RX7 003) TW = Sensing range TW (mm) NS3-22a 20 0 0 0 20 a(mm) a TW The plastic fibre-optic conductors are
More informationTHE VERSATILE MATERIAL HANDLING SYSTEM
102 THE VERSATILE MATERIAL HANDLING SYSTEM 103 Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter.
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More informationMInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationMINIMAT-EC. Handheld Screwdriver electric
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC straight handle design - torque ranges between 0.01-25 N m pistol-grip design - torque ranges between 0.06-18 N m angle head design -
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationSwitch cabinet housings. Distribution housings. Appropriate housings for each application. Our experience. Your safety.
Switch cabinet housings Distribution housings Appropriate housings for each application Our experience. Your safety. Overview of the housing ranges Mounting rail bus system In-Rail Bus...6 Switch cabinet
More informationMarking system FlyMarker PRO. Mark like a Professional
Marking system FlyMarker PRO Mark like a Professional Mark like a Professional FlyMarker PRO Version MOBIL The handheld CNC marking system FlyMarker PRO turns marking of bulky, heavy and stationary work
More informationRaman Sample Holders
Raman Sample Holders Ocean Optics offers several sample holders for Raman analysis of liquids and solids, including a multipurpose holder that can be configured for fluorescence and other measurements.
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationsecurity fasteners for every application
security fasteners for every application Welcome to Hafren 2 Specifying & Ordering Hafren Security Fasteners 5 2-Hole Screws 6 Pin Hex Screws 8 6-Lobe Pin Screws 10 6-Lobe Pin Self Drilling Screws 12 6-Lobe
More informationModel 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram
2704 11-05 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 21 22 20
More informationUKB-ACCESSORIES
12 WWW.UKB-GMBH.COM Squaring arms. 234 235 Digital angle gauge. 235 Insertion tools. 236 237 Phone +49 (0) 27 36 / 44 42-0. Fax +49 (0) 27 36 / 44 42-22 Squaring arms ADVANTAGES Flexible and exact adjustable
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationPOWER TOOL ACCESSORIES
Professional SDS Plus Hammer Drills grade high performance SDS plus hammer drill bit range using the latest precision machining and carbide tip technology for increased penetration rates and more efficient
More informationThe OHMIC RESISTORS Pty. Ltd.
The OHMIC RESISTORS Pty. Ltd. The operating mechanism is arranged between and above two steel end plates held apart by three mild steel spacing rods. The handle mechanism is mounted above the top plate.
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationDrilling Sets.
Drilling Sets 135 MASONRY SPEEDHAMMER POWER DRILL SETS 10507183 10507537 10507538 10507183 SPDH Power 5pc set: 6/8 x 110, 6/8/10 x 160mm 5706915071832 25 1 38.12 45.74 10507537 SPDH Power 5pc set: 5/6
More informationHead office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationMInIMAT-Ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-Ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
More informationD/F 200G D/F 500G D/F 1500G 27MM D/F 600G D/F 32MM 65MM METAL 90MM FG PROFI GEL DOUBLE 175MM
101010 D/F 100G 102010 D/F 200G 103000 300G 103010 D/F 300G 104010 D/F 400G 105010 D/F 500G 106010 D/F 600G 108010 D/F 800G 110010 D/F 1000G 115010 D/F 1500G 116010 D/F 2000G 121010 1000G 121510 1500G
More informationCord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections.
-Pin Amp Plastic 0883 Kit (consists of) 080 Receptacle 03 Pins (Qty ) 088 Kit (consists of) 080 Connector 03 Sockets (Qty ) Note: Strain relief clamp 03 needs to be ordered separately with cord-mounted
More informationReplacing the Gateway M405 Keyboard
Replacing the Gateway M405 Keyboard This package includes a replacement keyboard for your Gateway M405 notebook and these printed instructions. Tools you need You need a small Phillips and a small flat-blade
More informationReplacing the Gateway 200ARC Keyboard
Replacing the Gateway 200ARC Keyboard Replacing the Gateway 200ARC Keyboard This package includes a replacement keyboard for your Gateway 200ARC notebook and these printed instructions. Tools you need
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More information