Taylor Valve Technology, Inc

Size: px
Start display at page:

Download "Taylor Valve Technology, Inc"

Transcription

1 MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC

2 Taylor Valve SERIES MD MOV Choke Principle of Operation Taylor Valve Technology Multi Orifice Valve design principle provides precision control. The two adjacent internal discs each contain two precision orifices. Full Open Throttling Closed When the holes on both discs are aligned the valve is Full Open Position. When the front disc is rotated, changing the alignment and relationship to the fixed back disc, the flow area and orifice size are affected, the result either increase or decrease in flow. When the front disc o is rotated a full 0 (one quarter turn), the valve is in the full closed position. The discs are lapped to within two light bands of flatness (+/ ) to achieve positive shut off and maintain precise control. The fixed back disc is held perpendicular to the flow. The front disc floats against the back disc and seeks a mating surface promoting a positive seal. The differential pressure across the upstream disc and stabilizes the control surfaces. Vibration, noise or fatigues normally associated with loose or unsupported parts is eliminated.no control surfaces are introduced into the orifice, providing a clear center line for flow. The valves are rated for shut-off at ANSI Class III or IV depending on the style of valve and trim used. The orifices of the standard disc expose a small control surface profile to the fluid stream reducing wear. The multi-orifice design produces near linear flow characteristics. The low torque and quarter-turn design of Taylor Valve Technology s Multi-orifice Valves allows for a variety of actuation options; manual, pneumatic, hydraulic, or electric. page

3 SERIES MD MOV Choke Taylor Valve FEATURES Accurate control - 0 Degree rotation from Full Off to Full On Bolted Bonnet - Safety Bonnet is bolted into the body, it avoids the well-known risks of corrosion, cross threading, galling of threaded type connection in production environments. Safety Body Pressure Bleed Valve - The potential for buildup or trapped pressure is eliminated by the installation of a high pressure stainless steel bleed valve installed in accordance with the requirements of APIA. Extended Mean time between Service - Robust design and liberal application of hardened materials, efficien flow-geometry means the valves offer maximum production potential and minimum service requirements. Easy maintenance - Choke Valves are designed with special actuator mounting systems so the choke can be maintained. Optional features - Choke Valves can have trims and actuators custom designed for specific requirements, such as, special trims for noise reduction and sand control, reduced port and maximum orifice trims are available for very high pressure or minimum pressure loss for a declining field APPLICATIONS Well Site Automation Water Injection Control Valve CO Injection Control Valve Pump Bypass Pump Startup Applicatiob Picture Gas Lift Injection Control Blow Down and Dump Valve Remote Control for directional drilling page

4 Taylor Valve SERIES MDI Multi-Orifice Choke MDI Valve Design Features Optional Actuator MDI Positive Bean Choke Fully Guided Stem reduces imblance and vibration Mounting Bracket and adapter Redundant Bonnet Seals Bleed Valve to allow pressure to be released Protective cage Cross section of wear resistant material to extend service life Redundant Stem Seals with Backup rings Control Discs provide ASME Class III/IV Shut off Precision Orifices Manual MDI page

5 MODEL MDI MOV Choke Parts Diagram Taylor Valve Key Description Qty EXPLODED VIEW 0 0 Handle Lock Nut Turning Hub Calibration Label Bonnet Thrust Bearing Retainer Spring Backup Ring Turning Fork Dowel Pin Control Disc Dowel Pin Cage Wear Sleeve Bleed Valve Body Bonnet Bolts Data Plate Drive Screw page

6 Taylor Valve MODEL MDIS MOV Steam Choke Available Sizes Inch Inch Inch Packing Gland Adjustment Graphite Bonnet Seal Tungsten Carbide Disc Crush Seal Stainless Steel Turning Fork Detachable Handle and Hub Cartridge Assembly Design Bolted Bonnet Studs and Nuts Varity of end Connection Wear Sleeve Inch Flanged MDIS page

7 MODEL MDIS MOV Steam Choke Parts Diagram Taylor Valve Key Description Qty 0 0 Handle Lock Nut Turning Hub Bonnet Bolts Packing Gland Nut Packing Bonnet Dowel Pin Retainer Spring Bonnet Gasket Thrust Bearing Turning Fork Dowel Pins Control Disc Dowel Pin Cage Bonnet Bolts Wear Sleeve Body Data Plate Drive Screws 0 EXPLODED VIEW Inch Inch Inch 0 page

8 Taylor Valve MODEL MDA MOV Production Choke Available Sizes Inch Inch Redundant Stem Seals with Backup rings Fully Guided Stem reduces imblance and vibration MDA Positive Bean Choke Redundant Bonnet Seals Bleed Valve to allow pressure to be released Control Discs provide ASME Class III/IV Shut off Protective cage Cross section of wear resistant material to extend service life Automated MDI page

9 MODEL MDA MOV Choke Parts Diagram Taylor Valve EXPLODED VIEW Inch Inch Inch Key Description Qty Key Description Qty 0 Handle Lock Nut Turning Hub Calibration Label Bonnet Thrust Bearing Retainer Spring Backup Ring Turning Fork Dowel Pin 0 Control Disc Dowel Pin Cage Wear Sleeve Bleed Valve Body Bonnet Bolts Data Plate Drive Screw page

10 Taylor Valve MODEL MDAS MOV Steam Choke Available Sizes Inch Inch Packing Gland Adjustment Detachable Handle and Hub Studs and Nuts Fully Guided Stainless Steel Turning Fork reduces imbalance and vibration Graphite Bonnet Seal Graphite Packing Set Tungsten Carbide Discs provide ASME Class III/IV Shut off Crush Seal Protective cage Cross section of wear resistant material to extend service life Varity of end Connection Inch Flanged MDAS page 0 The assembly and disassembly of the MDAS is exactly the same as the MDIS and the part key numbers are the same to order parts refer to page for identifying numbers

11 MD Series MOV Choke Part Numbering System Taylor Valve MD Valve Type I Inline Body IS Inline Steam Body A Angle Body AS Angle Steam Body NOMINAL BORE Inch Inch Inch SERVICE 00 STANDARD 0 NACE 0 STEAM HIGH TEMP 0 WET CO- 0 LOW TEMP/SOUR 0 FULL SS 0 SALT WATER TYPE ACTUATOR 0 MANUAL HANDLE MANUAL GEAR ELECTRIC PNEUMATIC HYDRAULIC CS ACTUATOR BRACKET SS ACTUATOR BRACKET POSITIVE BEAN END CONNECTIONS 0 FNPT 0 FNPT 0 BUTT WELD SCH0 0 BUTT WELD SCH0 0 ANSI 00# RFF 0 ANSI 00# RTJ ANSI 00# RFF ANSI 00# RTJ ANSI 00# RFF ANSI 00# RTJ BUTT WELD XXH NATIONAL GROOVE ANSI 00# RFF ANSI 00# RTJ VICTAULIC ES ANSI 00# RTJ ANSI 00# RTJ NATIONAL GROOVE ANSI 00# RTJ FNPT ANSI 00# RFF ANSI 00# RFF ½ SOCKET WELD NOMINAL BORE SERVICE ACTUATOR END CONNECTIONS ANSI 00# RTJ ANSI 00# RTJ ANSI 00# RTJ ANSI 00# RFF ANSI 00# RFF ANSI 00# RFF ANSI 00# RFF SOCKET WELD ANSI 00# RFF VICTAULIC ES ANSI 00# RTJ BUTT WELD SCH0 0 SOCKET WELD ANSI 00# RTJ ANSI 00# RFF 0 SOCKET WELD BUTT WELD SCH0 BUTT WELD SCH0 VICTAULIC ES NOTE: For many other, and connections consult factory DISC SIZE DISC/WEAR SLEEVE MATERIAL BODY MATERIAL SEAL SEAL MATERIAL 00 SPECIAL 0 BUNA N / NBR 0 POLYURTHANE 0 EPT/ EPOM 0 FLUOROCARBON 0 METAL/FIBER 0 NEOPREME / CR 0 PEROXIDE CURED NBR 0 STEAM SEALS 0 PTFE BODY MATERIAL 0 CARBON STEEL 0 COATED STEEL 0 0 STAINLESS STEEL 0 DUPLEX STAINLESS DISC/SLEEVE 00 CERAMIC / - H00 SS 0 CARBIDE / - H00 SS 0 CARBIDE / STELLITE 0 CERAMIC / STELLITE 0 CARBIDE / CARBIDE CERAMIC / NO SLEEVE CARBIDE / NO SLEEVE POS BEAN / - H00 SS DISC SIZE 0 () / RND PORTS 0 () / RND PORTS 0 () / RND PORTS 0 () / RND PORTS 0 () / RND PORTS 0 () / PIE PORTS 0 () / RND PORTS 0 () / RND PORTS 0 ().0 PIE PORTS 0 () - / RND PORTS () - / RND PORTS NOTE: For positive bean sizes consult factory page

12 Taylor Valve ESTIMATOR FOR FLOW RATE NOMOGRAPH FOR WATER BEAN SIZE IN THS 00 PRESSURE DROP (DP) ACROSS CHOKE (PSI) DOUBLE ORIFICE CHOKE WATER FLOW IN BBL/DAY EXAMPLE PRESSURE DROP DP 00 PSI, WATER FLOW RATE 000 B/D FOR SINGLE ORIFICE CHOKE OR 0 B/D DOUBLE ORIFICE CHOKE READ BEAN SIZE 0 NOTE: P-P = DP WHEN P = UPSTREAM PRESSURE P = DOWNSTREAM PRESSURE DP = PRESSURE DROP ACROSS THE CHOKE SINGLE ORIFICE CHOKE page

13 ESTIMATOR FOR FLOW RATE Taylor Valve NOMOGRAPH FOR GAS EXAMPLE UPSTREAM PRESSURE OF 0 PSI, BEAN SIZE 0, AND GAS FLOW RATE OF 00 MCF PER DAY NOTE: UPSTREAM PRESSURE MUST BE TWO TIMES DOWNSTREAM PRESSURE (KNOWN AS CRITICAL FLOW) UPSTREAM PRESSURE (PSI) NATURAL GAS IN MSCFD BEAN SIZE IN THS page

14 Taylor Valve Sizing Information Flow Equations Liquid A. Non-Choked Turbulent Flow C = Q V S G P -P B. Choked Turbulent Flow A. Non-Choked Turbulent Flow C = V C = V Gas W.Y Q 0 P Y V xp S G T z x Mass Flow Rate Volumetric Flow Rate C = V Where: Q F L P = Inlet Pressure (psia) P = Outlet Pressure (psia) Q = Flow Rate (SCF/D) F L = Liquid Pressure Recovery Factor F = Liquid Critical Pressure Ratio Factor f P = F P VC f V S =Specific Gravity G S G P - P VC P = Pressure at Vena Contracta VC P =Liquid Vapor Pressure V P =Liquid Ctrical Pressure C P V P C ½ B. Choked Turbulent Flow Substitute x for x in the above Equations t Where: W = Flow Rate (lbs/hr) Y = Expansion Factor - Limits (.0>= Y <= 0.) x = ÄP/P ( Pressure Drop Ratio) Q = Flow Rate (SCFD) o T = Temperature ( R ) ÄP = P -P V = Specific Volume (ft /lb) P = Inlet Pressure (psia) P = Outlet Pressure (psia) x = Critical Pressure Drop Ratio t S G = Specific Gravity z = Compressibility Factor Sizing Data for Liquids P - Inlet Pressure (psia, psig, Bara, kpaa) P - Outlet Pressure ( psia, psig, Bara, kpaa) Q L - Flow (bbl/d, gal/min, lbs/hr, kg/hr, m/d ) SG - Specific Gravity of Liquid o o o o T - Temperature ( F, C, R, K ) Sizing Data For Gas Service P - Inlet Pressure (psia, psig, Bara, kpaa) P - Outlet Pressure ( psia, psig, Bara, kpaa) Q G - Flow ( scf/d, m /hr, kg/hr ) S G - Specific Gravity o o o o T - Temperature ( F, C, R, K ) Phase Flow P - Inlet Pressure (psia, psig, Bara, kpaa) P - Outlet Pressure ( psia, psig, Bara, kpaa) Q G - Flow (scf/d, m /hr, kg/hr ) Q L - Flow (bbl/d, gal/min, lbs/hr, kg/hr, m/d ) SG G - Specific Gravity of Gas SG L - Specific Gravity of Liquid o o o o T - Temperature ( F, C, R, K ) Co ( Gaseous ) P - Inlet Pressure (psia, psig, Bara, kpaa) P - Outlet Pressure ( psia, psig, Bara, kpaa) Q G - Flow ( scf/d, m /hr, kg/hr ) P V - Vapor Pressure (Function of Temperature) V - Specific Volume (Function of Temperature and P Pressure) SG G - Specific Gravity of Gas o o o o T - Temperature ( F, C, R, K ) page

Taylor Valve Technology, Inc

Taylor Valve Technology, Inc MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend

More information

Vonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)

Vonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body) Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.

More information

Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)

Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body) Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability

More information

Features: Quality Testing and Documentation

Features: Quality Testing and Documentation 1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice

More information

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe

More information

MultiPort Ball Valves

MultiPort Ball Valves Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort

More information

98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98

98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98 Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam

More information

SV81H Safety and Relief Valve

SV81H Safety and Relief Valve Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before

More information

Pig Valves Complete Solutions for Industrial Valves. jagflo.com

Pig Valves Complete Solutions for Industrial Valves. jagflo.com Pig Valves Complete Solutions for Industrial Valves Cat.no.:E-PV-00 Introduction ~ Quality Commitment How to Order Product Introduction Material Specifications Working Sequences Design Feature Dimensions

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling

More information

Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r

Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design

More information

VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES

VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES

More information

Daniel Senior Orifice Fitting Differential Pressure Flow Meters. Technical Guide May 2013

Daniel Senior Orifice Fitting Differential Pressure Flow Meters. Technical Guide May 2013 Daniel Senior Orifice Fitting Differential Pressure Flow Meters Technical Guide May 2013 Differential Pressure Flow Meters Technical Guide Proving its worth every day Overview The Daniel Senior Orifice

More information

This is trial version

This is trial version s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1

More information

Data is only for informational purpose. All specifications are subject to change without notice.

Data is only for informational purpose. All specifications are subject to change without notice. MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

More information

Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application

Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B

More information

Subsea Valves.

Subsea Valves. Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:

More information

Parts and Service Manual IMCO

Parts and Service Manual IMCO XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF

More information

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2 BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.

More information

Rosemount 1595 Conditioning Orifice Plate

Rosemount 1595 Conditioning Orifice Plate Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only

More information

SHORT PATTERN FLANGE BALL VALVES 5000 SERIES

SHORT PATTERN FLANGE BALL VALVES 5000 SERIES SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide

More information

GPX 1250 Gas Piston Pump

GPX 1250 Gas Piston Pump GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.

More information

CHECK VALVE CH-1601A (EN)

CHECK VALVE CH-1601A (EN) CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves

More information

708BS Series Bellows Stem Seal

708BS Series Bellows Stem Seal 708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with

More information

Item 620A Multi-Way Sanitary Ball Valve

Item 620A Multi-Way Sanitary Ball Valve R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel

More information

EnviZion TM Hygienic Diaphragm Valve

EnviZion TM Hygienic Diaphragm Valve EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,

More information

HOW TO ORDER SWIVEL JOINTS

HOW TO ORDER SWIVEL JOINTS HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline

More information

Performance!Nxt Release

Performance!Nxt Release June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management

More information

334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm

334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe

More information

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215 HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

More information

RL-H80 PARTS LIST # K

RL-H80 PARTS LIST # K RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN

More information

Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features

Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................

More information

Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems

Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the

More information

Cool Drawer Dual Sensor

Cool Drawer Dual Sensor The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial

More information

4" MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR

4 MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR NOCCHI SCM 4 PLUS Maximum rigidity and resistance to water hammer, Strong resistance to the abrasive action of sand, Excellent hydraulic efficiency SCM 4 PLUS submersible pumps consist of a multi-stage

More information

Butterfly Control Valve. DMK/6 Series

Butterfly Control Valve. DMK/6 Series Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK

More information

Parts / Spares Reference Sheet

Parts / Spares Reference Sheet Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b

More information

TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17

TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17 TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.

More information

8 Submersible Motors Standard

8 Submersible Motors Standard Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield

More information

SECTION FIVE - SANITARY - MANHOLES

SECTION FIVE - SANITARY - MANHOLES Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD

More information

Baumann Little Scotty Bronze Control Valve

Baumann Little Scotty Bronze Control Valve 24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature

More information

DIMENSION/WEIGHT kpa. 0 to 20 m / 0 to 60 ft 0 to 2 bar / 0 to 29 psi. 0 to 50 m / 0 to 160 ft 0 to 5 bar / 0 to 72.5 psi

DIMENSION/WEIGHT kpa. 0 to 20 m / 0 to 60 ft 0 to 2 bar / 0 to 29 psi. 0 to 50 m / 0 to 160 ft 0 to 5 bar / 0 to 72.5 psi V161102 Liquid Level Sensor Sensor for measuring the level of liquid in a well or tank USE / PURPOSE The range of liquid level sensors use pressure to measure the liquid level in a well or tank. The sensors

More information

Standard Bellows Metering Pumps

Standard Bellows Metering Pumps Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke

More information

H.A. Phillips Inventory Overstock Liquidation List

H.A. Phillips Inventory Overstock Liquidation List H.A. Phillips Inventory Overstock Liquidation List ALL PRICES HAVE BEEN REDUCED All Items subject to verification of stocking. Items are sold as is. Please contact the factory (630-377-0050) for more information.

More information

Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder

Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD

More information

VAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS

VAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and

More information

shop online:

shop online: Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH

More information

DirectCommand Installation Case/Flexi-Coil/New Holland Air Cart Kit (Variable Rate Electro Hydraulic Systems) Ag Leader Technology

DirectCommand Installation Case/Flexi-Coil/New Holland Air Cart Kit (Variable Rate Electro Hydraulic Systems) Ag Leader Technology Part Name/Description Part Number Quantity Flexi-Coil Air Seeder Kit 4100889 1 Generic Cable Installation Kit 2000901-1 1 Hardware Kit Large Module 2001354-1 1 Deutsch Dust Plug 8-pin 2002899-8 1 Quick

More information

JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models

JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models JVM, JVML SERIES Stainless Steel Construction Closed multi-stage impeller Flow: 4 to 38 GPM Head: to 82 ft. Range of HP: to HP Applications: Commercial booster system, Boiler feed, Jockey, Water Purification,

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

Compact Bellows Pumps

Compact Bellows Pumps Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray

More information

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT 1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof

More information

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3

More information

CS50 Chain Saw UT B Page 1 of 17 Accessories

CS50 Chain Saw UT B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 2 of 17 Accessories A02177 1 BUMPER SPIKE KIT 7031099 1 S RUBBER TUBING (10') 18453 1 /P GREASE-Multi-Purpose (Sprocket

More information

Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders

Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders GEP-7011 Rev. F 23777 Ref. ID: 8637 WARNING USER SHOULD READ AND THOROUGHLY

More information

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE

SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &

More information

BARE SHAFT PUMPS AND MOTOR PUMPS

BARE SHAFT PUMPS AND MOTOR PUMPS APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN

More information

Armstrong AVF and AVI Vortex Meter Installation and Operation Manual

Armstrong AVF and AVI Vortex Meter Installation and Operation Manual Armstrong AVF and AVI Vortex Meter Installation and Operation Manual 359-EN Please read and save these instructions. Customer Notice for Oxygen Service Unless you have specifically ordered Armstrong s

More information

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2-16; P=87 PSI Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

More information

Cast Iron Valves. JIS 5K/10K, Class 125

Cast Iron Valves. JIS 5K/10K, Class 125 Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI

More information

WL7 SPARKLING MAIN DRAWING WL7 FW SPARKLING. Wetted, Ice Bath and Firewall Drawings - see next page

WL7 SPARKLING MAIN DRAWING WL7 FW SPARKLING. Wetted, Ice Bath and Firewall Drawings - see next page SPARKLING MAIN DRAWING FW SPARKLING Wetted, Ice Bath and Firewall Drawings - see next page FW Manual Page 38 Revision: 10 12 2018 Ice Bath WETTED, FIREWALL AND ICE BATH DRAWINGS FW SPARKLING Firewall Wetted

More information

Application Notes for Team Hydrostatic Pad Bearings

Application Notes for Team Hydrostatic Pad Bearings Application Notes for Team Hydrostatic Pad Bearings THESE COMMODITIES, TECHNOLOGY, OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY

More information

708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available

708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available 708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional

More information

CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES. Mactech Europe LTD

CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES. Mactech Europe LTD CLAMSHELL PIPE CUTTING AND BEVELLING MACHINES Mactech Europe LTD Mactech s Clamshell lathes are portable pipe cutting machines designed for on-site precision severing, severing/beveling, and severing/double

More information

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

3, 4, 6 & 8 Model H Series Alarm Check Valve Installation and Maintenance Guide ", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.

More information

Vickers Service Data Vane Pumps Thru-Drive Vane Type Pump (F3)-35VT*(M)-**A(M)2-**-*-22-* Revised 2/98 I-3149-S

Vickers Service Data Vane Pumps Thru-Drive Vane Type Pump (F3)-35VT*(M)-**A(M)2-**-*-22-* Revised 2/98 I-3149-S Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING

More information

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents

More information

Inline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120

Inline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120 Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00

More information

Operating Instructions Wall saw WSE1217 USA

Operating Instructions Wall saw WSE1217 USA Operating Instructions Index 000 Original operating instructions 10992859 en / 25.04.2012 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which

More information

Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution

Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution Stainless Steel Submersible Pumps DATA BOOKET ISO Company Pumping Solution Hz Photographs of a few Manufacturing Units Contents Stainless steel submersible bore well pumps Product data Introduction Operating

More information

Preparation and Installation of the HPX (DD) Rupture Disc / HPX Double Disc Holder Assembly

Preparation and Installation of the HPX (DD) Rupture Disc / HPX Double Disc Holder Assembly Preparation and Installation of the HPX (DD) Rupture Disc / HPX Double Disc Holder Assembly GEP-6074 Rev. J 102335 Ref. I.D.: 16590 WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS

More information

Vickers Service Data Vane Pumps ThruĆDrive Vane Type Pump (F3)-45VT*(M)-**A(M)2-**-*-22 Rev 2/98 I-3151-S

Vickers Service Data Vane Pumps ThruĆDrive Vane Type Pump (F3)-45VT*(M)-**A(M)2-**-*-22 Rev 2/98 I-3151-S Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING

More information

Installation and Operating Manual FM50 IOM 2-18 DRAFT

Installation and Operating Manual FM50 IOM 2-18 DRAFT Installation and Operating Manual Table of Contents 1. Safety Precautions... 3 2. Details 2.1 Part Numbers... 4 2.2 Configurations... 5 2.3 Specifications... 13 2.4 Cables and Wiring... 14 2.5 Interface,

More information

BFW Traveler: Assembly and Alignment Procedure Serial Number: BFW # / VC # / WC # / Base #

BFW Traveler: Assembly and Alignment Procedure Serial Number: BFW # / VC # / WC # / Base # BFW Traveler: Assembly and Alignment Procedure Serial Number: BFW # / VC # / WC # / Base # NOTE - This document: 1. records the assembly and alignment steps for the LCLS Undulator Beam Finder Wire (BFW).

More information

Spare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start

Spare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV

More information

TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C

TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many

More information

The 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels.

The 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels. Varec Series The Series is designed to provide emergency venting of low pressure storage tanks and vessels. Introduction When the tank is exposed to abnormal internal pressure or vacuum beyond the capability

More information

NEOTECHA. PFA lined Ball Valves - Models SNB and SNC

NEOTECHA. PFA lined Ball Valves - Models SNB and SNC NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest

More information

Composite Type Rupture Disc

Composite Type Rupture Disc Composite Type Rupture Disc 2-2202-2 COMPOSITE* TYPE RUPTURE DISC What is a Composite Type Rupture Disc? A Composite Type Rupture Disc is a differential pressure relief device used to protect pressurized

More information

RSK. Wafer Type Check Valve. Construction. Features. Advantages

RSK. Wafer Type Check Valve. Construction. Features. Advantages Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges

More information

Pressed for time? JUST PRESS, CRIMP AND SAVE.

Pressed for time? JUST PRESS, CRIMP AND SAVE. Pressed for time? JUST PRESS, CRIMP AND SAVE. 03/17 Hammond Valve s newly expanded UltraPress line will save you more time than ever. Designed for press-connection systems piping potable water, HVAC and

More information

Ball Screw Actuator Models Advantages:

Ball Screw Actuator Models Advantages: Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing

More information

YANMAR N18 AUX.ENGINE SPARES

YANMAR N18 AUX.ENGINE SPARES YANMAR N18 AUX.ENGINE SPARES Contact: A.H. Global Impex Piston recondition 6 pcs Main Bearing 146673-02351 12 PAIR C.R Bearing 146673-22380 11 PAIR Piston Ring Oil 146676-22180 17 Pcs Piston Rind TOP 146673-22950

More information

P143 Pressure Regulator

P143 Pressure Regulator P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include

More information

Spare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm

Spare parts list. Forward and reversible plate MV 305, Valid from serial number. MV 305 Honda 600 mm MV 320 Hatz 600 mm Spare parts list Forward and reversible plate MV 0, 0 MV 0 Honda 00 mm MV 0 Hatz 00 mm MV 0 Honda 00 mm MV 0 Hatz 00 mm Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 0 00 00 0c

More information

Front Load Single Sensor

Front Load Single Sensor INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of

More information

jamesbury Bulletin B101-2EN Issue 11/2007

jamesbury Bulletin B101-2EN Issue 11/2007 /" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.

More information

Preparation and Installation of the RCS Rupture Disc Assembly

Preparation and Installation of the RCS Rupture Disc Assembly GEP-6048 Rev. Y 102335 Ref. I.D.: 6691 Preparation and Installation of the RCS Rupture Disc Assembly WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING DISC. THESE

More information

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3

More information