580 RS, 580 RSE, 580 RSW, 600 C. Part s Manual A 3/00 Printed in USA

Transcription

1 580 RS, 580 RSE, 580 RSW, 600 C Part s Manual A /00 Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Husqvarna replacement parts. The replacement of any part on this vehicle with anything other than a Husqvarna authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Husqvarna disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts PRODUCT REGISTRATION Please fill out and return the Warranty Registration Card to Husqvarna. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Husqvarna parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING: 1. Know the model and serial numbers of your unit.. Know the part number required.. Know the quantity required.. Know the part description. /00

3 TABLE OF CONTENTS MODELS Model (580 RS) Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Self-Propelled Serial No and up Model (580 RSE) Cycle-Briggs & Stratton Intek OHV 6.5 HP Electric, Self-Propelled Serial No and up Model (580 RSW) Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Self-Propelled, Swivel Serial No and up Model (600 C) Cycle-Robin 6.0 HP Recoil, Self-Propelled, Commercial Serial No and up DECALS Decals MAIN FRAME & ENGINE Handlebar and Controls Mower Pan and Bag Blade and Belt Engine and Electrical WHEELS Wheels and Adjusters Friction Wheel and Adjusters Swivel Wheels and Brackets ELECTRICAL AND CONTINUITY DIAGRAMS Electrical and Continuity Diagram REFERENCE TABLE Hardware descriptions are given in decimals. Decimals to Fractions.06 1/16.56 / /8.65 5/8.188 / / /.750 /.1 5/ /16.75 / /8.8 7/ / / Copyright 000

4 DECALS Model 580 RS, 580 RSE, 580 RSW, 600 C 1 10 STOP WARNING Do not operate mower unless guards are in operating position or bagger is attached. 0787B 6 PM010 /00

5 DECALS Model 580 RS, 580 RSE, 580 RSW, 600 C Item Part No. Qty. Description Decal-Speed Control Decal-Swoosh Husqvarna Label-Bagger 1" Decal-Danger Decal-580 RS Decal-580 RSE Decal-580 RSW Decal-600 C Decal-Husqvarna & Robins (600 C) Decal-Husqvarna-Briggs & Stratton Intek OHV(580 RS, 580 RSE, 580 RSW) Decal-Robin 6HP OHV-Commercial (600 C) Decal-OHV 6.5 Husqvarna (580 RS, 580 RSE, 580 RSW) Decal-Bilingual Danger Decal-Key Switch (580 RSE) Decal-Engine Control Decal-Warning /00 5

6 Model 580 RS, 580 RSE, 580 RSW, 600 C HANDLEBAR AND CONTROLS PM00 Item Part No. Qty. Description Engine Bail Weldment Washer-Flat-Steel.5 x.688 x Bushing-Flange.5 x.688 x /00

7 HANDLEBAR AND CONTROLS Model 580 RS, 580 RSE, 580 RSW, 600 C Item Part No. Qty. Description Cap, Vinyl.5 I.D Traction Bail Handlebar, Self Propelled Engine Control Cable (580 RS, 580 RSE, 580 RSW) Engine Control Cable (600 C) Switch-Cable Anchor (580 RSE) Cable Anchor-Right Hand Cable Anchor-Left Hand Bolt-Round Head Square Neck.5-0 x Nut-Locking-Center Cable Tie Throttle Cable (600 C) Brace-Speed Control Bracket-Speed Control Link-Handlebar Adjuster Left Hand (580 RS, 580 RSE, 580 RSW) Link-Handlebar Adjuster Right Hand (580 RS, 580 RSE, 580 RSW) Handlebar Bracket (600 C) Washer-Bellville Spring (580 RS, 580 RSE, 580 RSW) Bushing-Flange.5 x.500 x.51 x.875 (580 RS, 580 RSE, 580 RSW) Nut-Locking-Center Bolt-Round Head Square Neck.5-0 x Bolt-Round Head Square Neck.5-0 x.50 Grade Knob Rod-Speed Control Traction Cable Bolt-Round Head Square Neck.1-18 x 1.00 Grade Shoulder Spacer Bolt-Round Head Square Neck.1-18 x.75 Grade 5 (580 RS, 580 RSE, 580 RSW) Bolt-Round Head Square Neck.1-18 x.75 Grade 5 (600 C) Nut-Locking-Center Washer-Flat-Steel.06 x.81 x Washer-Lock.75 x.5 Heavy Pressure Flange Washer-Flat-Steel.81 x.60 x Pin-Cotter.06 x Shift Link Bell Crank-Speed Control Friction Washer Cap, Rod Swivel Bolt-Round Head Square Neck.8-16 x Pin-Hair-Internal.08 x.18 x Support Pad Rivet.187 x Washer-Flat Steel.1 x.50 x Bolt-Hex.1-18 x.75 Grade 5 (600 C) Bolt-Hex.5-0 x 1.75 Grade 5 (600 C) Washer-Flat-Steel.50 x.56 x.0 (600 C) /00 7

8 Model 580 RS, 580 RSE, 580 RSW, 600 C MOWER PAN AND BAG PM00 8 /00

9 MOWER PAN AND BAG Model 580 RS, 580 RSE, 580 RSW, 600 C Item Part No. Qty. Description Bag-Consumer Black Bagger Frame Door-Catcher Plate Button Bumper Bumper Screw-Tapping 1- x.50 Hex Washer Head (580 RSW, 600 C) Screw-Tapping 10- x.75 Hex Washer Head (580 RSW, 600 C) Plate-Catcher Bolt-Round Head Square Neck.5-0 x Snap-in Clip (580 RSE) Nut-Push Spring-Torsion.10 x.68 x Pin-Door Mulch Master Mulcher Accessory Nut-Locking-Flange Bolt-Round Head Square Neck.5-0 x.75 Grade Hinge Base Weldment Washer-Flat-Steel.8 x.87 x Washer-Locking.5 x Nut-Hex Nut-Wing Drive Cover Trim Bumper Nut-Wing # Battery Plate (580 RSE) U-Bolt (580 RSE) Mower Pan Head w/ Decals Bolt-Round Head Square Neck.1-18 x.50 Grade 5 (580 RS, 580 RSE, 580 RSW) Front Panel (580 RS, 580 RSE, 580 RSW) Nut-Locking-Center.1-18 (580 RS, 580 RSE, 580 RSW) Grommet-Plastic Baffle-Center Screw-Tapping x.6 Hex Washer Head Side Discharge Assembly Side Discharge Cover Washer-Flat-Steel.06 x.81 x Nut-Locking-Nylon Bolt-Round Head Square Neck.1-18 x.75 Grade Nut-Push.1 /00

10 BLADE AND BELT Model 580 RS, 580 RSE, 580 RSW, 600 C PM010 Item Part No. Qty. Description V-Belt L Section Bolt-Hex.-1 x 1.5 Grade Idler-Flat 1.75 x Nut-Locking-Center Washer-Flat-Steel. x.65 x Spacer.5 x.5 x Idler Arm Bushing-Flange.5 x.501 x.50 x Bolt-Hex.1-18 x.75 Grade Nut-Locking-Center Spring, Tension.0 x. x Blade, 1" Mower Washer-Locking.8 x Bolt-Hex.8- x Washer-Flat Steel.0 x 1.50 x.15 (600 C) 10 /00

11 ENGINE AND ELECTRICAL Model 580 RS, 580 RSE, 580 RSW, 600 C Robin Engine Briggs & Stratton Engine PM011 Item Part No. Qty. Description Key w/cap (580 RSE) Cap-Ignition Switch (580 RSE) Nut, Panel.65- (580 RSE) Washer-Locking Internal.65 x.05 (580 RSE) Key Switch (580 RSE) Wire Harness (580 RSE) Battery (580 RSE) AR Battery Charger (580 RSE) (Not included with unit) Recoil Start Handle Fuel Cap * 1 Engine, Robin 6 HP Cycle (600 C) 1 Engine, Briggs & Stratton Intek OHV 6.5HP Recoil (580 RS, 580 RSW) 1 Engine, Briggs & Stratton Intek OHV 6.5HP Electric Start (580 RSE) Blade Adapter.875 Dia w/keyway (580 RS, RSE, RSW) Blade Adapter (600 C) Key-Woodruff.156 x.65 x Screw-Tapping.8-16 x 1.00 Hex Washer Head Nut-Locking-Center.1-18(600 C) Washer-Flat-Steel.1 x.7 x.065 (600 C) Washer-Locking.1 x.07 Heavy Bolt-Hex.1-18 x 1.5 Grade 5 (600 C) Bolt-Hex.1-18 x.75 Grade 5 (600 C) *See your Dealer for Engine Specifications /00

12 Model 580 RS, 580 RSE, 580 RSW, 600 C WHEELS AND ADJUSTERS PM0065 Item Part No. Qty. Description Rear Protective Guard, Self Propelled Pin-Cotter.06 x Rod Knob 1 /00

13 Item Part No. Qty. Description WHEELS AND ADJUSTERS Model 580 RS, 580 RSE, 580 RSW, 600 C Height Adjustment Lever Bolt-Round Head Square Short Neck.1-18 x Nut-Locking-Center Handlebar Stud Nut-Locking-Center Rear Axle Bolt-Round Head Square Short Neck.1-18 x Ring-Retaining-External.500 x Washer-Flat-Steel.505 x.880 x Left Hand WheelRear Right Hand WheelRear Spacer Tube Bushing-Flange.1 x.500 x. x Bearing-Ball.65 x 1.8 x.50 (600 C) Rear Quadrant-Left Hand Rear Quadrant-Right Hand Bracket-Handlebar Mounting-Right Hand Bracket-Handlebar Mounting-Left Hand Nut-Locking-Flanged Washer-Flat-Steel.505 x.880 x Wheel-Front Washer-Flat-Steel.50 x.87 x.06 (580 RS, 580 RSE, 580 RSW) Bolt-Hex.1-18 x 1.00 Grade 5 (580 RS, 580 RSE, 580 RSW) Bushing-Flange.1 x.500 x. x Lever, Front Height Adjustment (580 RS, 580 RSE, 580 RSW) Left Hand Bracket Assembly (580 RS, 580 RSE, 580 RSW) Right Hand Bracket Assembly (580 RS,RSE, RSW) Front Axle (580 RS, 580 RSE, 580 RSW) Front Quadrant, Left Hand (580 RS, 580 RSE, 580 RSW) Front Quadrant, Right Hand (580 RS,RSE, RSW) Bolt-Round Head Square Neck.1-18 x.50 Grade 5 (580 RS, 580 RSE, 580 RSW) Nut-Locking-Nylon De-Thatcher Retainer Weldment (600 C) Rear Adjuster Bracket-Right Hand (600 C) Rear Adjuster Bracket-Left Hand (580 RS, 580 RSE, 580 RSW, 600 C) Rear Bracket and Bearing Assembly (580 RS, 580 RSE, 580 RSW) Hubcap (Qty. on 580 RS, 580 RSE, 600 C - Qty. on 580 RSW) /00 1

14 Model 580 RS, 580 RSE, 580 RSW, 600 C FRICTION WHEEL AND ADJUSTERS PM0080 Item Part No. Qty. Description Gear Cover Ring-Retaining-External,8 x Screw-Tapping 1- x.50 Hex Washer Head Washer - Flat - Steel.50 x.875 x Washer - Flat - Steel.51 x 1.00 x Idler Gear 7* Bearing - Ball.50 x 1.8 x Retainer Idler Shaft Differential Assembly 1 /00

15 Item Part No. Qty. Description F RICTION W HEEL AND A DJUSTERS Model 580 RS, 580 RSE, 580 RSW, 600 C * Bearing-Ball.65 x 1.8 x.50 (600 C) Gear-Pinion Bearing - Ball.56 x 1.75 x.7 (600 C) Drive Mount Spring-Tension.051 x.60 x Drive Actuator Weldment Pivot Channel Weldment Nut-Locking-Center Washer-Flat-Steel. x.688 x Bolt-Round Head Square Short Neck.1-18 x Rod-Guide Washer - Flat - Steel 1.0 x.00 x Push Nut Pin-Roll.15 x.50 (580 RS, 580 RSE, 580 RSW) Pin-Roll.15 x.6 (600 C) Shift Link Shift Arm Weldment Retainer Plate Hex Shaft Pin - Roll.188 x Thrust Plate Screw-Tapping 10- x.75 (580 RS, 580 RSE, 580 RSW) Guide-Plate (580 RS, 580 RSE, 580 RSW) Friction Wheel Assembly Key # was a friction wheel assembly which had a rubber ring on a plastic hub. The plastic hub in NLA from the supplier. The replacement is a complete assembly with new brackets and a new friction wheel. (Dec 008) Nut-Hex Washer-Locking.1 x.07 Heavy Washer Flat-Steel.8 x.875 x Friction Sheave Bearing-Ball.65 x 1.75 x Washer- Flat-Steel 1.06 x 1. x Spindle Bearing Bearing Retainer Bolt-Round Head Square Neck.1-18 x 1.75 Grade 5 (600 C) Bolt-Hex.5-0 x.50 Grade 5 (600 C) Friction Disc (600 C) Friction Wheel Hub (600 C) Nut-Locking-Center.5-0 (600 C) Bearing Plate (600 C) Bearing Retainer (600 C) Bearing Ball 1.00 x.00 x.56 (600 C) Bearing Retainer (600 C) Screw-Tapping 1- x.50 Hex Washer Head Ring-Retaining - External 1.00 x.0 (600 C) Fitting-Lube.5-8 x.56 (580 RSW, 600 C) Ring-Retaining-External.57 x Friction Ring (580 RS, 580 RSE, 580 RSW) Friction Wheel Hub (580 RS, 580 RSE, 580 RSW) * Available as individual components or part of Service Kit which consists of () , (1) , () and () /00 15

16 SWIVEL WHEELS AND BRACKETS Model 580 RSW PM007 Item Part No. Qty. Description Ring-Retaining-External.65 x Washer-Flat-Steels.60 x x Right Mount Arm Weldment Left Mount Arm Weldment Bushing-Sleeve.65 x.750 x Pin-Clevis.5 x Bolt-Round Head Square Neck.1-18 x.50 Grade Nut-Hex Fitting-Lube.5-8 x Wheel Yoke Weldment Pin-Hair External.1 x.1 x Axle Tab Pin-Clevis. x Ring-Kickout Wheel-7.50 O.D. Steel Swivel 16 /00

17 ELECTRICAL AND CONTINUITY DIAGRAM Model 580 RSW BATTERY BLACK RED BLACK BLACK RED ENGINE RED 1 1 RED A B RED YELLOW S R M B A RED GREEN WHITE KEY SWITCH PM000 The diagram below shows the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch (055800) B A R S M OFF B A R S M RUN B A R S M START PM0100 /00 17

18 081700A