Cubase Confusion Prepared by Mick Seeley - Livewire Recording
|
|
- Janis Waters
- 6 years ago
- Views:
Transcription
1 Cubase Confusion Prepared by Mick Seeley - Livewire Recording Mick_Mac_Guy@yahoo.com Do s & Don t s DO: First, if you have a Mac, create an image of the boot drive with Disk utility and save it NOW DO: Always use the Yamaha N12 template for a new project or Cubase will screw you! DO: Always ALWAYS create a new folder for each new project/song and save ALL files to it. DO: Watch your master bus and aux out levels in Cubase they tend to get loud DO: Keep an eye on Input monitor (speaker icon). It must be on (or enabled in Pref s) in track you are recording to check level & hear input (duh). Turn OFF when done recording that track DO: Use info line to transpose MIDI, fine tune audio pitch, and to rename audio files DO: Use key commands: H & G to zoom in/out of tracks horizontally CMD - and CMD - to zoom tracks vertically (make unused tracks small!) SHIFT and # to go to marked locations SHIFT and G to set a loop (cycle) and turn it on OPTION + Click & Drag to copy & move events (works with separate tracks too!) F13 to record / F2 to hide/unhide the transport bar DO: Back up constantly, and to a DVD-RW at end of each project. DO: use Folder tracks, esp. For drum tracks. Create groups for drums. Vocals. Whatever. It s EZ! DO: Use automation - can even do it on the ST out (enable W & R in the mixer to create a track) Use the Mute tool (the X ) to mute a track event you don t want to hear (non-destructive) Use the Draw tool to create event in empty MIDI track, or to draw an automation track PRECOUNT (countdown) is toggled off/on in the Transport bar: the * above the time signature DO: Copy channel setting (EQ, FX, etc) for similar tracks (such as doubled BG vox or guitars). See Pg. 85 in Operations manual. DON T have Enable Record on Selected Track on in Preferences (Editing Project & Mixer page), DON T get in the habit of wasting disk space. When a project is done, back it up, and erase ASAP. DON T record without autoscroll on! DON T use too much of the reverb plug-in in Cubase, it is a CPU hog. Create an FX channel for it.
2 Punch In/Out Strange: To do it, first set your left & right locator positions by holding option and clicking on L and R in the transport bar. To activate auto-record, click on \ and / (under L and R) so they are lit up. If a track is in record mode, Cubase will go into record from play mode once you reach the punch in (left locator) point and punch out at the right locator point. No need to press record (!). Pasting Digital Audio (really equals insert) As per the manual: If there is a (copied) selection in the editor, this will be replaced by the pasted data. If there is no selection (if the selection length is 0 ), the pasted data will be inserted starting at the selection line. The section to the right of the line will be moved to make room for the pasted material. In Loop Selects all audio between the left and right locator. Converting a stereo track to mono Select the track you want the audio file to convert and press CMD-F to find the selected audio file in the Pool. Right-click on the file and select Convert files. Select Mono from the next hard-to-see window. Make sure you select New File or the old mix will be written over (unless you don t care). Track monitoring That speaker icon is not what you may think: it actually switches between sound coming into the track input (selected via the Inspector ) and the sound already recorded in that track. When the orange speaker light is on, you are monitoring input, so you have to turn it off to hear playback. This can be changed in the Preferences (VST page) to Tape machine Style (currently enabled, or it is supposed to be!). This option emulates standard tape machine behavior: input monitoring in Stop mode and during recording, but not during playback. Missing Sound Output (overall)? If there is no sound at all coming out from Cubase, check (from the Devices pull-down menu) device setup/mlan network. If all of the inputs and outputs are inactive, they have to be re-enabled. Oddly enough, it s not done in the device setup screens (WTF?!). Press F4 to get to VST Connections and change the Audio Device to Mlan network for each channel (can t do it globally - ARGH!). When done, Save the project file. Inputs & Outputs not where they should be? Same nonsense as above reassign them To mix: Create a stereo mix track if one doesn t already exist. Assign all the other tracks outputs to ST Mix out (N12-L/R). Set Mix track input to N12-ST in, turn mix track s output off for now ( No Bus ). Adjust mix to where you want it, set overall volume with N12 s red stereo fader. Check levels on the Cubase mixer (F3). To check a channel s setting, or add EQ, press the E button on that channel s strip. Record mix track. To play iy back, solo the mix track, and set the N12 Control Room source to DAW, or to ST with DAW to ST on. If you can t hear the playback, see below
3 Can t hear the mix track? A common bug in Cubase 4.5. Try soling and unsoloing the track & muting/unmuting the other tracks until the damn mix track decides it is OK to play now (grr!!) Can t hear the click? Maybe you re just lucky! But if you need to hear it and you know it s on, check the VST connections. Make sure it s enabled for the bus you want to hear it on. Licensing Is a nightmare! Easiest way reimage the boot drive (it only takes 15 min). Run the License Control Center app. Reboot & select Activate data license from the wizard menu the only function that appears to work in this nasty app. It will go online and do god knows what, and then Cubase should work. Converting sample rate & bit size of mixes in Cubase Mixes in Cubase default to 24-bit, & whatever sample rate you used in the project. To convert mixes to standard 16-bit 44.1khz for CDs: first, in Cubase, make sure you rename the audio file (not the track) name to an appropriate mix name. Then, go to the Pool (cmd-p). Right click on the mix file and select convert file. Make sure you select New File or the old mix will be written over. Importing Audio Best to do it from the Pool Window (cmd-p) since you ll have to go there anyway (Cubase doesn t insert audio directly into a track). Select the track you want the audio file to go into & open the Pool window. Right-click on the project s Audio folder, and select Import medium. Obviously, it should be the same sample rate and bit depth as the rest of the project. Once the file is imported, click on it to select it, right-click and select Insert into project. Looping an Audio File Man this was tough to find info on! It apparently can t be done, as even Steinberg s demo files have loops copied & pasted. They call a cycle a loop, but it s really just a repeated playback of a certain section of the song, NOT an audio loop. I tried importing a looped AIFF file, it just plays once. Even MIDI tracks aren t easily looped, just copy & paste. To set a loop (cycle) in Cubase, you can enter the measure (counter) values manually in the locator section of transport bar, or ctrl-click in the ruler (above the tracks) to set the left locate point. Use cmd-click to set the R point locator point. Enable loop in the transport bar to use your loop. Or you can select an audio region and press shift+g, to set locators and turn on cycle button. Handy: You set up a quick loop to audition an event edit. Play the loop while adjusting the event end or whatever. That s all just wonderful, but how do you loop a separate track? Archiving Is a bunch of crap in Cubase. Just save the files from that song s project folder to your backup drive, burn a DVD backup too, then nuke em. Using Cubase s Archive functions seems to screw up the file synchronization (great feature!), but doesn t save hardly any disk space! 1 st - DO NOT Minimize the files From the Pool Window 2 nd Remove unused media from Pool Window 3 rd DO NOT freeze edits (from Audio menu) Don t bother to Prepare Archive from the Media or context menu either
4 It is not necessary to archive the Images folder, since these Images can be recreated by Cubase AI. You may also find a file with the extension.csh in the project folder. This contains image information for edited clips and other data that can be recreated, so it can safely be deleted. Using MIDI fader automation I haven t even tried it with MIDI, but it works great for audio tracks! Here s how: first Select the track you want to automate (in this example I m using a Yamaha EX7 s middle mod wheel on MIDI ch. 12 to control volume with). Device setup\remote Items\Generic remote should be set up like: Note the highlighted lines, the rest don t matter in this example. Enable Write automation on the track (click on the W button), and press play (not record!). Move your MIDI controller s slider or wheel to set your volume. If it doesn t work, try using the fader on the Cubase mixer for that track. If that works, your MIDI is set up wrong. You may have to adjust your keyboard or other controller to transmit MIDI volume (CC #7). You know you are good to go if you turn your controller and the volume fader on the enabled track moves. Once you are set up, enable the write button (W) for automation on that track, and play with it! When done, click on the W button to turn off automation writing. Enable Read automation(the R button on that track to follow automation levels. To edit volume afterwards, It is actually easier to open up the automation sub-track (by right-clicking on the track and selecting show Used Automation ) to fine-tune volume settings, by clicking on and dragging the blue volume line. Removing automation is apparently an all-or-nothing option. I see no way to select a region of an automation sub-track and cut it. You can only right click on the automation track and choose Remove selected tracks. I don t see a list edit available for it either.
5 Using MIDI editor Select a track and then go to Open Key Editor from the MIDI pull-down menu. It s pretty much self-explanatory: use the cursor to modify note length or pitch or velocity in the bottom window. Use the draw tool to create new notes, tools work the same as in audio. MIDI List Editor First, set Prefs to Open List Editor in Event Display / MIDI. Then click at the top of the list view window on this icon: To set list for autoscroll. Drag cursor line in ruler to get to section you want. The rest is like the usual, but use the R window for velocity. To insert something, click on the insert type box in the middle of the top row, select your data, then use the pencil to click in the event display (grid area) to insert the data. MIDI Input (MIDI icon) lets you input stuff that way? Using 2 Aux sends in Mixdown Option 1 Channel Saver mode. Put mixer in hardware mix mode. On the tracks you want to send to external FX, turn OFF the aux send in Cubase on those tracks. Assign one track to AUX Left, the other to AUX Right. Turn off Aux sends on all other tracks. Set up the FX wet/dry mix you want on the effects devices, unless you have a channel to burn on the N12 for FX return (i.e. 2T to ST). This way is kind of a pain, but works. Option 2 In hardware mix mode, assign the track to a N12 fader. Assign the Aux send in that track in Cubase. The AUX send defaults to N12-AUX (which is L and R out). Change it to to AUX L or R bus, crank up the level, and run that Aux L or R to an ext device, and then into a N8/N12. Works, but takes 2 channels. Option 3 True Stereo. In ANY mix mode, assign the track output to N12 L/R. Assign the Aux send for the track(s) you want to process in Cubase to Aux L/R. Turn off Aux sends on all other tracks that you don t want to use the external processor on. Patch the N12 s Aux L and R out to the external device, and then into a stereo fader or into the 2-Track input on the N12. Option 4 For using 2 FX sends. In ANY mix mode, in Cubase assign the track(s) s send output to N12 Aux Left and/or R. Turn off Aux sends on all other tracks that you don t want to use the external processor on. Patch the N12 s Aux L and R out to the external device(s), and then into any N12 channel or into the 2-Track input on the N12. Works! Get more channels! (Mac only) By creating an aggregate device, you can use more than one audio interface at the same time on the Mac. Many new Macs have combo audio inputs & outputs that can be used for stereo optical digital I/O with a simple adapter (Parts Express has these parts for cheap). What all this means is you can create another stereo input and output to Cubase for digital audio transfer, for extra input channels, or for FX send/returns! Of course, you could use the analog I/O on the Mac as well with the proper adapters, but the quality will be MUCH better if you digital. To do so, create the aggregate device (click here for info). Now you can use any external device that has TOSlink optical digital connectors (or SPDIF, with an adapter box) with Cubase. I ve done the latter with an old DAT deck, which came in handy for digital transfers. Next I ll try my TC M-One digital FX Enjoy! Any questions, comments or corrections are appreciated. Mick_Mac_Guy@Yahoo.com
Using the 01X with Cubase SX 3. To all 01X users thank you for your continued use of the Yamaha 01X Digital Mixing Studio!
Supplementary Manual Using the 01X with Cubase SX 3 To all 01X users thank you for your continued use of the Yamaha 01X Digital Mixing Studio! Since the 01X was first released, software programs that can
More informationA project is the basic file type in Cubase, in the same way that a document is the basic file type in Microsoft Word.
CUBASE Menu > Cubase SL help The Cubase.net website: http://www.cubase.net/phpbb2/ A project is the basic file type in Cubase, in the same way that a document is the basic file type in Microsoft Word.
More informationCubase SX3 / DM2000 V2 Setup and Operation
Cubase SX3 / DM2000 V2 Setup and Operation Page 1 Cubase SX3 / DM2000 V2 Setup and Operation This document describes setup and operation for remote control of Cubase SX from the DM2000 digital mixing console.
More informationCristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, Heike Schilling The information in this document is subject to change without notice
Operation Manual Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, Heike Schilling The information in this document is subject to change without notice and does not represent a commitment
More informationUSO RESTRITO. Operation Manual
Operation Manual Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, Heike Schilling The information in this document is subject to change without notice and does not represent a commitment
More informationMOTIF XS Editor VST Owner s Manual
MOTIF XS Editor VST Owner s Manual Contents What is the MOTIF XS Editor VST?...2 Data Structure of the MOTIF XS Editor VST...3 Starting the MOTIF XS Editor VST...4 An Example of MOTIF XS Editor VST in
More informationCubase SX / 02R96 Setup and Operation V2
Page 1 Cubase SX / 02R96 Setup and Operation This document describes setup and operation for remote control of Cubase SX from the 02R96 digital mixing console. These instructions apply to 02R96 V2.0 or
More informationMV-8000 Production Studio. When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has:
The Main Points When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has: Integrated Sampling, MIDI Sequencing, and Audio Recording 2 Samplers In One High Quality
More informationWorkshop. Automation ÂØÒňΠMV-8000
ÂØÒňΠMV-8000 Workshop Automation 2006 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S.
More informationMV-8800 Production Studio
ÂØÒňΠWorkshop MV-8800 Production Studio Auto Chop 2007 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland
More informationConnecting the SI-24 to the VS-2400CD for Expanded Operation
Connecting the SI-24 to the VS-2400CD for Expanded Operation When the SI-24 is used in tandem with the VS-2400CD, it becomes a powerful expander with 8 additional analog preamps and faders, switches &
More informationChapter 4 Audio Recording Software Digital Audio Produc/on [IP3038PA]
Chapter 4 Audio Recording Software Digital Audio Produc/on [IP3038PA] Learning Objectives By the end of the class, you should be able to: 1 List the different parts of the computer- based digital audio
More informationMOX6/MOX8 Editor VST Owner s Manual
MOX6/MOX8 Editor VST Owner s Manual Contents What is the MOX6/MOX8 Editor VST?...2 Data Structure of the MOX6/MOX8 Editor VST...3 Starting the MOX6/MOX8 Editor VST...4 An Example of MOX6/MOX8 Editor VST
More informationMOTIF XF Editor Owner s Manual
MOTIF XF Editor Owner s Manual Contents What is the MOTIF XF Editor?...2 Studio Manager...2 Studio Connections...2 About Open Plug-in Technology...3 Data Structure of the MOTIF XF Editor...4 Starting the
More informationVersion 1.50 of the DPS24 OS introduces many significant improvements and new features to the DPS24:
Introduction Version 1.50 of the DPS24 OS introduces many significant improvements and new features to the DPS24: WAV Import / Export using the following devices (IDE or SCSI - Internal or External): CD
More informationInstalling energyxt2.5. Mac. Double-click energyxt2.5 disk image file. Drag the energyxt2.5 folder to your "Applica- tions" folder / your desktop.
ENGLISH 2 Getting started Windows Installing energyxt2.5 Mac Linux Double-click the setup file and follow the on- screen instructions. i. i. Double-click energyxt2.5 disk image file. Drag the energyxt2.5
More informationMainStage 2. Exploring MainStage
MainStage 2 Exploring MainStage KKApple Inc. Copyright 2011 Apple Inc. All rights reserved. Your rights to the software are governed by the accompanying software license agreement. The owner or authorized
More informationAmazing Audacity: Session 1
Online 2012 Amazing Audacity: Session 1 Katie Wardrobe Midnight Music The Audacity Screen...3 Import audio (a song or SFX)...3 Before we start... 3 File formats... 3 What s the different between WAV and
More informationCUBASE. ST Vfor Windows. Getting Started - 1 -
CUBASE ST Vfor Windows Getting Started - 1 - Operation Manual by Ernst Nathorst-Böös, Ludvig Carlson Documentation Quality Control: Dave Nicholson, Anja Kramer, Andrea Menke Additional Assistance: Cecilia
More informationCubase 9.5. Version History. October 2018 Steinberg Media Technologies GmbH
Cubase 9.5 Version History October 2018 Steinberg Media Technologies GmbH Cubase 9.5.40 Issues & improvements The following list details resolved issues and improvements in this version. Additional improvements
More informationPro Tools. Automation & Control Surface Manual. Version: 1.0
Pro Tools Automation & Control Surface Manual Version: 1.0 Contents Control 2802 Fader Automation Page 3 Automation Overview Page 3 Automation Setup Page 3 Recording & Editing Automation Data Page 4 Automation
More informationReally Easy Recording & Editing
ASME 2011 Really Easy Recording & Editing Katie Wardrobe Midnight Music The Audacity screen... 4 Import audio (a song or SFX)... 4 Before we start...4 Import song into Audacity...4 Adjusting the view...
More informationUSING GARAGE BAND. Creating a new project
USING GARAGE BAND Creating a new project 1. Open GarageBand by clicking on the guitar icon on the dock. 2. In the project chooser select the type of project you want to create. Choose any instrument or
More informationSonicCell. Using SonicCell with SONAR LE. Workshop ÂØÒňÎ. Expandable Synthesizer Module and Audio Interface SCWS03 1
ÂØÒňΠWorkshop SonicCell Expandable Synthesizer Module and Audio Interface Using SonicCell with SONAR LE 2008 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced
More informationGarageBand 3 Getting Started Includes a complete tour of the GarageBand window, plus step-by-step lessons on working with GarageBand
GarageBand 3 Getting Started Includes a complete tour of the GarageBand window, plus step-by-step lessons on working with GarageBand 1 Contents Chapter 1 7 Welcome to GarageBand 8 What s New in GarageBand
More informationMusic Hands-On Project In this project, you will complete a one-minute song snippet. To complete this project, you will add
Project 1 Music Hands-On Project In this project, you will complete a one-minute song snippet. To complete this project, you will add Audio and Instrument tracks, add drums using the Xpand! 2 and Boom
More informationCubase LE Quick Start Guide
Our company does not provide support for Cubase LE. Please refer to the Cubase LE help menu for instructions about how to use the application. Contents Contents... 1 Conventions used in this manual...
More informationSales Manual Part II
Sales Manual Part II In this sales manual, you ll be able to show how to make a song and create a WAV file of the song. Table of Contents Page 1. Main Features of the Sequencer 2 2. How to Demo the Sequencer
More informationHALion 5. Version history Known issues & solutions. February 2015 Steinberg Media Technologies GmbH
HALion 5 Version history Known issues & solutions February 2015 Steinberg Media Technologies GmbH Table of contents Table of contents... 2 About... 3 HALion 5.1.10... 4 Improvements & issues resolved...
More informationMV-8800 Production Studio
ÂØÒňΠWorkshop MV-8800 Production Studio Working with External MIDI Instruments 2007 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the
More informationInear Display AMALGAME
Inear Display AMALGAME User Guide Version 1.1 Table Of Contents Introduction 3 Overview 4 Installation and First Launch 5 Interface Overview 6 Loading and Saving Presets 7 Effects 8 XY Pad 9 Sequences
More information_APP A_541_10/31/06. Appendix A. Backing Up Your Project Files
1-59863-307-4_APP A_541_10/31/06 Appendix A Backing Up Your Project Files At the end of every recording session, I back up my project files. It doesn t matter whether I m running late or whether I m so
More informationStem Creation Guide. Introduction
Stem Creation Guide Introduction The way we approach mixing in Dolby Atmos is to keep the drums and bass in the stereo bus. This will ensure that your tracks maintain the overall power, weight, and punch
More informationYamaha DM1000/Nuendo Setup and Control
Yamaha DM1000/Nuendo Setup and Control The information in this document is subject to change without notice and does not represent a commitment on the part of Steinberg Media Technologies GmbH. The software
More informationEasyStart. D12 Main Features. EasyStart CONTENTS
EasyStart D12 Main Features No Audio Compression 12 channel, 4 buss digital mixer 12 track recorder, with a total of 96 virtual tracks Hi, Lo and adjustable mid frequency EQ for every channel Up to 11
More informationKeyStudio 49i. English. User Guide
KeyStudio 49i English User Guide KeyStudio Table of 49i Contents User Guide 1 Introduction. 3 About this User Guide. 3 KeyStudio 49i Features. 4 Minimum System Requirements. 5 Standalone. 5 Bus-Powered.
More informationADR Standard Procedure (Revised 3/09)
ADR Standard Procedure (Revised 3/09) (All personnel performing ADR on DMA projects should follow this prescribed procedure in order to ensure optimum quality of results and to maintain consistency across
More informationTable of Contents GETTING STARTED...4 RECORDING...11 PLAYING BACK...14
USER GUIDE Table of Contents GETTING STARTED...4 Main Window Essentials...5 Operation Modes...7 Setup...8 RECORDING...11 Tracks... 11 > Track Names... 11 > Adding Tracks... 11 > Master Bus... 11 > Track
More informationUSO RESTRITO. Yamaha 01V96/Nuendo Setup and Control
Yamaha 01V96/Nuendo Setup and Control The information in this document is subject to change without notice and does not represent a commitment on the part of Steinberg Media Technologies GmbH. The software
More information16-Track Digital Recorder Quick Loop Sampler Parametric EQ and Dynamics Pro Quality Effects Sound Clip Recorder Optional CD-RW Drive
16-Track Digital Recorder Quick Loop Sampler Parametric EQ and Dynamics Pro Quality Effects Sound Clip Recorder Optional CD-RW Drive Professional Digital Music Production Made Quick and Easy The AW16G
More informationOperation Manual by Ludvig Carlson, Anders Nordmark, Roger Wiklander Quality Control: K. Albrecht, C.Bachmann, H. Bischoff, S. Pfeifer, C.
Operation Manual by Ludvig Carlson, Anders Nordmark, Roger Wiklander Quality Control: K. Albrecht, C.Bachmann, H. Bischoff, S. Pfeifer, C. Schomburg The information in this document is subject to change
More informationUsing BOSS TONE STUDIO for ME-80
This document explains operation of BOSS TONE STUDIO for ME-80 (subsequently referred to as TONE STUDIO ). Getting Ready to Use TONE STUDIO Important terms in TONE STUDIO Library This is a storage area
More informationTouchMix. Self-Guided Tour WELCOME TO TOUCHMIX! CHAPTER. 1. Navigation. 2. Simple & Advanced Mode. 3. Presets. 4. Scenes 5. FX. 6. Wizards. 7.
TouchMix Self-Guided Tour WELCOME TO TOUCHMIX! This guide will introduce you to many commonly used features of TouchMix. Click on a chapter title below, or follow the guide from start to finish for the
More informationand close the various Traktor Panels. Setup: click on the setup icon to open the setup dialog. Close: clicking this icon will close TRAKTOR DJ Studio.
Welcome... TRAKTOR DJ Studio 2 Quick Reference...to TRAKTOR DJ Studio 2, the latest and most advanced version of the software that changed the way DJs think about computers. We ve introduced a number of
More informationD1200mkII Main Features. EasyStart CONTENTS
EasyStart D1200mkII Main Features No audio compression 16/24-bit recording available 16 channel, 4 bus digital mixer 12 track recorder, with 96 virtual tracks 4-track simultaneous recording Hi, Lo and
More informationGANG STOMPS. user manual
GANG STOMPS user manual loops de la Crème - Feb 2017 1 Thank you for purchasing GANG STOMPS! This Kontakt library lets you easily play and control a group of 24 musicians stomping together in a room with
More informationSono 61. English User Guide
Sono 61 English User Guide 1 Introduction.............................................................. 3 ProKeys Sono 61 Features............................................... 4 What s in the Box?.......................................................
More informationDigital Audio. Amplitude Analogue signal
Digital Audio The sounds that we hear are air molecules vibrating in a wave pattern. These sound waves are measured by our ear drums and processed in our brain. As computers are digital machines, sound
More informationUSER S GUIDE TC FX II. Renowned M2000 Reverb Algorithms. Plug-in for Mackie Digital Mixers
USER S GUIDE TC FX II Renowned M2000 Reverb Algorithms Plug-in for Mackie Digital Mixers Iconography This icon identifies a description of how to perform an action with the mouse. This icon identifies
More informationtwisted wave twisted wave [an introduction]
twisted wave information www.twistedwave.com $80 free 30 day trial mac only updated frequently 2 versions available (OSX [more powerful] & ios [more portable]) OSX & ios are different purchases [different
More informationExport Audio Mixdown
26 Introduction The function in Cubase Essential allows you to mix down audio from the program to a file on your hard disk. You always mix down an output bus. For example, if you have set up a stereo mix
More informationFaderPort 8 8-channel Production Controller
FaderPort 8 8-channel Production Controller www.presonus.com English Table of Contents 1 Overview 1 1.1 Introduction 1 1.2 About this manual 1 1.3 FaderPort 8 Features 2 1.4 Studio One Artist Features
More informationNew Features in Cubase Studio 5.5
New Features in Cubase Studio 5.5 Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, Heike Schilling The information in this document is subject to change without notice and does not represent
More informationTRAX SP User Guide. Direct any questions or issues you may encounter with the use or installation of ADX TRAX SP to:
TRAX SP User Guide Welcome to ADX TRAX 3 SP! This guide provides an in-depth look at the features, functionality and workflow of the software. To quickly learn how to use and work with ADX TRAX SP, please
More informationReason Remote support for Mackie control surfaces
Reason Remote support for Mackie control surfaces This document describes the Remote implementation for Mackie Control, Extender and C4. For general information about how to use Remote in Reason, please
More informationRecording. The Mixing Desk. Overview the Soundtrack Pro workspace
Drama Sound Studios Using Soundtrack Pro 3 (v.03 updated 18 November 2010) You cannot use this system without training and a username. These notes are designed to remind you what you were shown in training.
More informationBlaze Audio Karaoke Sing-n-Burn
Blaze Audio Karaoke Sing-n-Burn Manual Copyright 2005 by Singing Electrons, Inc. Contents 1.0 Getting Started...3 1.1 Welcome to Karaoke Sing-n-Burn!...3 1.2 Features...3 1.3 Learning to Use Karaoke Sing-n-Burn...3
More informationPurchasers of this product are permitted to utilize said content for the creating, performing, recording and distributing original musical works.
Owner s Manual Copyright 2012 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 3PS What Is R-MIX?
More informationAccompanying documentation Fireface UFX Class Compliant Mode Technical background, mode of operation, practical use
Accompanying documentation Fireface UFX Class Compliant Mode Technical background, mode of operation, practical use Background information on Class Compliant operation of the Fireface UFX 1. General remarks
More informationThe Matrix Mixer. Yamaha 01X and Yamaha 01V96 Digital Audio Mixing Desks. User Manual
The Matrix Mixer Yamaha 01X and Yamaha 01V96 Digital Audio Mixing Desks User Manual Contents 1. Overview:...3 1.1. Route Audio Sources to Audio Destinations:...3 1.2. Process Audio at Source:...4 1.3.
More informationAccusonus Inc. Lexington, Massachusetts USA
The information in this document is subject to change without notice and does not represent a commitment on the part of Accusonus Inc. The software described by this document is subject to a License Agreement
More informationÂØÒňΠMV-8000v3.5 Production STUDIO
ÂØÒňΠMV-8000v3.5 Production STUDIO Congratulations on your purchase of the Roland MV-8000. This TurboStart contains stepby-step instructions that will quickly introduce you to the MV-8000 s major features.
More informationWaves. MultiRack SoundGrid V9. Outboard Processing Host for Your DiGiCo Console
Waves MultiRack SoundGrid V9 Outboard Processing Host for Your DiGiCo Console Contents The Rack in Detail... 3 Adding Plugins to a Rack... 6 Rack View: Controlling Your Plug-ins... 7 WaveSystem Toolbar
More informationAUDIO VIDEO MEDIA CONTROLLERS. EuCon Application Setup Guide. Document Revision: K
EuCon Application Setup Guide Document Revision: K MC Control, MC Mix, MC Transport, Studio Monitor Express, Studio Monitor Pro, EuControl, EuCon and EuCon Powered are trademarks of Euphonix Inc. All other
More informationTB-303. Software Bass Line Owner s Manual Roland Corporation 01
TB-303 Software Bass Line Owner s Manual 2019 Roland Corporation 01 Introduction For details on the settings for the DAW software that you re using, refer to the DAW s help or manuals. About Trademarks
More informationPro Tools for Music Teachers Session 3 Homework
Online 2013 Pro Tools for Music Teachers Session 3 Homework Amy Bennett Midnight Music Pro Tools for Music Teachers 3 How to use these notes 3 An editing reminder 3 Using Spot Mode - why not! 3 Using inserts
More informationMPC Essentials Release Notes
MPC Essentials Release Notes About Akai Professional is continually updating and enhancing MPC Essentials. This document lists the new features, fixes and improvements made to your MPC Essentials software.
More informationUsing BOSS TONE STUDIO for SY-300
This document explains operation of BOSS TONE STUDIO for SY-300 (subsequently referred to as TONE STUDIO ). Getting Ready to Use TONE STUDIO Important terms in TONE STUDIO Library This is a storage area
More informationClose all programs CMD + Tab (to show the currently running programs) then CMD+Q (Quit) on each program you don t want running.
Objective: Once you can complete the steps in this skills lab without thinking, but reacting, you will have a basic core working knowledge of Pro Tools and virtually any other hard disk recording system.
More informationUsing Audacity A Tutorial
Using Audacity A Tutorial Peter Graff Production Manager, KBCS FM These days, there are many digital audio editors out there that can do amazing things with sound. But, most of them cost money, and if
More information-You will need to provide 2 AA batteries and an SD card to use the recorder.
ZOOM H4N - USER GUIDE SETTING UP: -You will need to provide 2 AA batteries and an SD card to use the recorder. -The batteries go into the compartment on the back of the recorder. If you turn the switch
More informationAUDIOMODERN SYNC 3 BASIC MANUAL
BASIC MANUAL THANK YOU FOR BUYING SYNC 3. Please feel free to contact us at audiomodern@mail.com HOW TO INSTALL To install, unzip and drag the instrument-folder to any hard drive. Launch Kontakt and load
More informationUser Guide. English. Manual Version 2.2
User Guide English Manual Version 2.2 Table of Contents Introduction... 7 Tutorial... 12 System Requirements & Product Support... 7 Creating a Drum Kit... 12 About This User Guide... 8 Creating a Drum
More informationsoothe audio processor
soothe audio processor Manual Thank you for using soothe! soothe is a spectral processor for suppressing resonances in the mid and high frequencies. It works by automatically detecting the resonances in
More informationSpatial Audio Workstation
Date: 11 of August, 2017 Spatial Audio Workstation Release Notes Version 2.4.0 1 Introduction This document describes the steps to install the Spatial Audio Workstation 2 on your computer. Please read
More informationSOUND BROWSER SYSTEM PROTOTYPES SOUND FILE WINDOW. Click to update the list when files or directories have been added or removed by other programs.
Each Sound in the list that is preceded by a cyan arrow (->) performs processing on an input (the replaceable input). These Sounds come with a default input, but a replacement input can be substituted
More informationD3200 Main Features. D3200 Connections and Navigation 2 Modes and Features Tour 3-5
EasyStart D3200 Main Features 32 track recorder plus a dedicated stereo master track - a total of 272 virtual tracks! Up to 12 track simultaneous recording in both 16 and 24bit Record / playback @ 44.1
More informationWelcome Installation Authorization The T-Pain Engine: Quick Start Interface Sound Check... 10
CONTENTS Welcome... 5 Installation... 5 Authorization... 6 The T-Pain Engine: Quick Start... 8 Interface... 8 Sound Check... 10 The T-Pain Engine: First Steps... 11 Beat... 11 Vocals... 14 FX... 15 Mixdown...
More informationGarageBand at a Glance t a Glanc A
1 arageand at a lance t a lance arageand at a lance introduces you to the features and controls in the arageand windows. You use these controls to create your songs in arageand. Take a look at these pages
More informationHALion 5. Version history Known issues & solutions. July 2017 Steinberg Media Technologies GmbH
HALion 5 Version history Known issues & solutions July 2017 Steinberg Media Technologies GmbH HALion 5.1.20 Improvements & issues resolved The following list details resolved issues and improvements in
More informationChapter 3 User Interface Basics
Chapter 3 User Interface Basics Mode Buttons Navigation The Display Chapter 3 will show you how to get around the front panel of your K2500. Your interactions can be divided into three primary operations:
More information21M.361 Composing with Computers I (Electronic Music Composition) Spring 2008
MIT OpenCourseWare http://ocw.mit.edu 21M.361 Composing with Computers I (Electronic Music Composition) Spring 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.
More informationM-480 RCS. User s Guide
M-480 RCS User s Guide Roland corporation and its affiliates assume no responsibility for any loss or damage (loss of profits, loss of data or other economical losses) caused by use of this software. This
More informationFIRESTATION. Installation Help Guide for Windows XP Users
FIRESTATION Installation Help Guide for Windows XP Users If the Firestation s drivers do not install correctly on the first try don t worry, simply review your steps and determine where the install stopped.
More informationKURZWEIL Artis PlugSE
KURZWEIL Artis PlugSE SoundTower PlugSE for KURZWEIL Artis Stage Piano VST (PC/Mac) AudioUnits (Mac) SoundEditor, PlugSE, and ipad Products Reach Inside... SoundTower Inc. 2014 www.soundtower.com Special
More informationThe Hard Disk Sampler Tool Kit! GIGAStation. Owner s Manual.
The Hard Disk Sampler Tool Kit! GIGAStation Owner s Manual www.egosys.net All rights to this document are reserved. No part of this document may be copied reproduced, or distributed in any form or by any
More informationGetting Started With GarageBand 09
Getting Started With GarageBand 09 Getting Started With GarageBand ʻ09 GarageBand is a unique piece of software that allows the user to create their own music that can be added to slideshows, movies, DVDʼs,
More informationRead This First! Symphonic Instrument Version Update Notes
Read This First! Symphonic Instrument Version 1.1.2 Update Notes This booklet provides important installation instructions and late-breaking information about version 1.1.2 features in the MOTU Symphonic
More informationHow You Use the Timeline
How You Use the Timeline The Timeline and the Canvas display two different views of the same sequence. The Timeline shows the chronological arrangement of clips and layered video and audio clip items,
More informationChapter 2: Basic Operation...17
Chapter 1: Introduction...1 Top Panel...1 Front Panel...7 Rear Panel...8 Bottom Panel...9 Output Connectivity Example...10 Analog Input Connectivity Example...10 Digital Connectivity Example...11 USB Connectivity...11
More informationM-16DX 16-Channel Digital Mixer
M-16DX 16-Channel Digital Mixer Workshop Using the M-16DX with Cubase 008 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission
More informationSpatial Audio Workstation
Date: 12 of April, 2017 Spatial Audio Workstation Release Notes Version 2.3.4 1 Introduction This document describes the steps to install the Spatial Audio Workstation 2 on your computer. Please read it
More informationPSP Rhythm User s Manual
PSP Rhythm User s Manual Introduction pg. 02 Main Menu pg. 03 Button Icon Legend pg. 03 User Interface pg. 04 Pattern View pg. 05 Track View pg. 07 Wave View pg. 09 Effects View pg. 11 Song View pg. 14
More informationMACROS by Bevoss. Because of the 6 action limit, I had to spread this over 2 macros.
MACROS by Bevoss (Caveat - Some of these may depend on my preference settings, ie I set the cursor to go to the start of loop selections when changed, in Prefs-Audio-Playback-seek on loop selection change,
More informationTRAKTOR DJ Studio 2 Quick Reference. Welcome... The TRAKTOR Panels
Welcome... TRAKTOR DJ Studio 2 Quick Reference...to TRAKTOR DJ Studio 2, the latest and most advanced version of the software that changed the way DJs think about computers. We ve introduced a number of
More informationTC SUPPORT INTERACTIVE
MANUAL TC SUPPORT INTERACTIVE The TC Support Interactive website www.tcsupport.tc is designed as an online support and information center. At the site you can find answers to specific questions regarding
More informationNew Features in Cubase 5.5
New Features in Cubase 5.5 Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer, Heike Schilling The information in this document is subject to change without notice and does not represent a
More informationThe Kurzweil K2000 & Galaxy Intro: Phase One: Phase Two:
The Kurzweil K2000 & Galaxy Intro: The Kurzweil K2000 is arguably the most powerful synthesizer in the OU MIDI Lab. It is definitely the most flexible and programmable. But to realize this power and flexibility
More informationFW Release Notes Version TEAC Professional Division. FireWire Audio MIDI Interface / DAW Control Surface
TEAC Professional Division FW 1082 FireWire Audio MIDI Interface / DAW Control Surface Release Notes Version 1.50 032105 FW 1082 v1.50 Release Notes... 2 Fixed Since v1.50 Public Beta... 2 Installation...
More informationUSO RESTRITO. Getting Started
Getting Started Original Manual: Synkron Revision and Quality Control: C. Bachmann, H. Bischoff, S. Pfeifer, C. Schomburg The information in this document is subject to change without notice and does not
More information