INSTALLATION INSTRUCTIONS FOR HAZUS-MHMR5

Transcription

1 INSTALLATION INSTRUCTIONS FOR HAZUS-MHMR5 SYSTEM AND SOFTWARE REQUIREMENTS In order for HAZUS-MH to run properly, your system must meet certain minimum requirements. Table 1 provides guidance for three software operation levels. System requirements are directly related to the volume of data to be used in the analysis. For example, reasonable processing times can be expected when using the Recommended computer system if the software operator is analyzing multiple earthquake scenarios for large cities (population > 500,000). The operator is assumed to be working on an Intel PC. TABLE 1 HARDWARE AND SOFTWARE REQUIREMENTS FOR HAZUS-MH. ArcGIS can be purchased by contacting ESRI, Incorporated at , or online at ArcGIS and Windows products should be installed using the manufacturer s instructions. Internet access is highly recommended, although not a system and software requirement. The HAZUS operator may occasionally need to access online Help, and current program status reports. INSTALLATION Before installing HAZUS-MH, the minimum requirements listed in Section 1.1 should be met. If you are upgrading from HAZUS-MH MR4, read the section at the end of this chapter entitled Upgrading from HAZUS-MR4 to HAZUS-MH MR5 at the end of this chapter. To install HAZUS-MH, follow the steps outlined below. 1. Start Windows and log in with an account with a full Administrator account. 2. Insert HAZUS-MH Applications DVD in your DVD-ROM drive. 3. Launch Windows Explorer (if not already running), and navigate to the DVD-DROM drive (d:\ for example). Installation Instructions for HAZUS-MH MR5 Page 1

2 4. Under Windows XP, double-click setup.exe to start the installation. Under Windows 7, rightclick the setup.exe file and select Run as administrator option. FIGURE 1. LAUNCHING HAZUS-MH SETUP UNDER WINDOWS Initially, the setup will install an instance of the HAZUS-MH database (SQL Server Express 2005), shows the requirements screen (Table 1 above) and then the setup program startup screen (as shown below) will appear. Click on the Next button. FIGURE 2. STARTUP SCREEN OF THE HAZUS-MH INSTALLATION PROGRAM. Installation Instructions for HAZUS-MH MR5 Page 2

3 FIGURE 3. REGISTER USER NAME AND PROGRAM PERMISSIONS. 6. Permit program access to anyone who uses the computer or exclude others from accessing HAZUS program and data. Enter your User Name and Company (or Agency) information. Select the appropriate installation choice for your study project. Then, click on the Next button. 7. Select the preferred type of installation shown in Figure 4 and Figure 5. Install the complete set of HAZUS modules (3 hazard modules and FIT tools), the compact set (3 hazards, no tools), or select to customize your installation from one or more hazard and tool modules. Click on the Next button. FIGURE 4. COMPLETE INSTALLATION. FIGURE 5. CUSTOM INSTALLATION. 8. Specify the directory where you wish HAZUS to be installed. The default directory is C:\Program files\hazus-mh as shown in Figure 6. If you accept the default destination directory, click on the Next button. Installation Instructions for HAZUS-MH MR5 Page 3

4 FIGURE 6. SPECIFY THE PATH OF THE HAZUS PROGRAM DIRECTORY. FIGURE 7. SPECIFY THE PATH OF THE HAZUS DIRECTORY INTERACTIVELY. Otherwise click on the Browse button and interactively choose a directory. The window will appear as shown Figure 7. You can select or type-in a new directory path and click on OK. You will be returned to the original Select Installation Directory window and the directory that you have selected will appear in the middle of the window. Click the Next button. 9. Folders will be created for the data files associated with your study regions. Specify the primary destination directory where you prefer the HAZUS-MH region subfolders to be created. The default directory is C:\Program files\hazus-mh\regions. 10. If you accept the default destination directory, click on the Next button. Otherwise, click on the Browse button and interactively choose a directory. FIGURE 8 DEFAULT DIRECTORY FOR STUDY REGION FILES Installation Instructions for HAZUS-MH MR5 Page 4

5 11. When creating new study regions, HAZUS-MH expects the default inventory data 1 to reside under the Data Path which is by default C:\Program Files\HAZUS-MH\Data Inventory folder. Accept the default location or override as needed by clicking the Browse button. Click Next to continue. NOTE: The Choose Data Path dialog only specifies the folder where the state inventory data will be copied by the user from the DVD after installation has completed. This dialog doesn t copy the data from the DVD to the specified folder; that has to be done manually by the user after installation. IMPORTANT: Remember the folder specified here since it will be needed later on for copying the default inventory data. FIGURE 9 DEFAULT DIRECTORY FOR INVENTORY DATA 12. If a custom installation was chosen, the next screen will offer a choice of program modules. One or more hazard modules must be selected (see Figure 10). 1 The Data Inventory DVD that ships with HAZUS-MH contains the default data for the entire US in compressed format. See the section Using the Inventory Data at the end of this chapter for details on how to un-compress it and make it available to HAZUS-MH. Installation Instructions for HAZUS-MH MR5 Page 5

6 FIGURE 10 SELECT EACH HAZARD MODULE AND TOOL PROGRAM TO INSTALL. Here is a brief description of the different components: Earthquake One of three natural hazard program components. Flood One of three natural hazard program components. Hurricane One of three natural hazard program components. 13. Your next screen will show the installation options you selected and the directory paths you designated for the program, region data files, and data path. FIGURE 11 COMPLETE INSTALLATION SETTINGS. Installation Instructions for HAZUS-MH MR5 Page 6

7 Review the installation settings. Click on the Back button to go back to any of the previous windows and change the previous selections. If you are satisfied with your selection, click the Install button. 14. It will take few minutes for the program to install. When the installation is complete, the dialog box shown below will appear and HAZUS program icon will automatically be created on your desktop. Click Finish to return Windows. It is recommended that your restart your machine. FIGURE 12 DIALOG BOX INDICATING SUCCESSFUL HAZUS-MH INSTALLATION. UPGRADING FROM HAZUS-MR4 TO HAZUS-MH MR5 Study regions created in a previous version of HAZUS-MH (HAZUS-MH MR4) cannot be used as is in HAZUS-MH MR5. If you want to re-use study regions from HAZUS-MH MR4, do the following: 1. Export those regions from HAZUS-MH MR4. 2. Un-install HAZUS-MH MR4. 3. Install HAZUS-MH MR5. 4. Import the previously exported regions in HAZUS-MH MR5. The import routine will take care of making the needed conversion from the MR4 release to the MR5 release. 5. Select to re-run all the analysis modules. STARTING THE PROGRAM Installation Instructions for HAZUS-MH MR5 Page 7

8 The installation program described in Section 2.2 creates a HAZUS-MH icon/shortcut on the computer s desktop. To start the program, double click on the HAZUS-MH icon, as shown in Error! Reference source not found.. FIGURE 13 HAZUS-MH ICON. In order to enter inventory or run an analysis, you must first create a study region. Creating a study region is discussed in Section 3.1. UNINSTALLING THE PROGRAM UNDER WINDOWS XP To uninstall HAZUS-MH, under Windows XP, launch Control Panel from Start Settings Control Panel as shown in Error! Reference source not found.. FIGURE 14. OPEN THE CONTROL PANEL. From the Control Panel window, double click on Add/Remove Programs as shown in Figure 15. FIGURE 15 SELECT ADD/REMOVE PROGRAMS. FIGURE 16 UNINSTALL HAZUS-MH. Installation Instructions for HAZUS-MH MR5 Page 8

9 You will be prompted with an Add/Remove Program Properties window as shown in Error! Reference source not found.figure 16. Highlight HAZUS-MH and double click on the Change/Remove button. The install wizard will start and provide you with three uninstall options shown in Figure 17Error! Reference source not found.: Modify your previous installation (ex. Add tools), Repair (reinstall) program components, or Remove all of the previously installed HAZUS-MH files. FIGURE 17 MODIFY, REPAIR, OR REMOVE THE HAZUS-MH PROGRAM. To uninstall HAZUS-MH, select the Remove option and click Next to proceed. UNINSTALLING THE PROGRAM UNDER WINDOWS 7 To uninstall HAZUS-MH, under Windows 7, select Start Control Panel and select the Uninstall a program option. Note: The un-installation option requires full-administrative access rights to the computer. Installation Instructions for HAZUS-MH MR5 Page 9

10 FIGURE 18 CONTROL PANEL FOR WINDOWS 7. Select HAZUS-MH and right-click (Figure 19Error! Reference source not found.). Select the Uninstall option from the pop-up menu, and then select Remove from the next dialog (Figure 20 belowerror! Reference source not found.). FIGURE 19. UNINSTALL SCREEN UNDER WINDOWS 7. Installation Instructions for HAZUS-MH MR5 Page 10

11 FIGURE 20 MODIFY, REPAIR, OR REMOVE THE HAZUS-MH PROGRAM. To make partial changes to the modules/features to the original installation (either install additional features that were not installed initially, or remove features that were installed initially but are not needed anymore), select the Change option and select the Modify option. USING THE INVENTORY DATA The Data Inventory DVD this ships with HAZUS-MH contains the default inventory data for the entire U.S. The data is compressed as one file per state. Each file is a self-extracting archive and named simply with the corresponding state code (data for California is in CA.exe, GA.exe for Georgia, and so on). To make the default inventory data accessible to HAZUS-MH (when creating new study regions), do the following: Copy the compressed file for the state(s) of interest to the Data Path folder. The Data Path was specified during setup. By default, this folder is c:\program Files\HAZUS- MH\Data Inventory Navigate to the folder (via Windows Explorer) and double-click the file (CA.exe for California for example) to uncompress it. (optional) Delete the compressed file (CA.exe in our example) if disk-space is needed. If creating a study region within the state of interest generates errors, then confirm that the steps above where performed correctly. Installation Instructions for HAZUS-MH MR5 Page 11

12 PROGRAM BASICS HAZUS is an ArcGIS-based program with a standard Windows interface that provides a familiar working environment. Unlike the previous versions, HAZUS resides on top of ArcMap. The only ArcMap function that has been disabled is table loading. Buttons are added to the ArcMap menu bar to perform HAZUS hazard risk analysis and loss modeling functions (Figure 21). FIGURE 21 HAZUS MENU BAR ADDS FUNCTIONS TO ARCMAP. The user interface is comprised of a menu bar, tool bar and various screens and windows. These elements follow standard Windows conventions and allow you to manipulate and analyse data within HAZUS. This section briefly describes some of the features. MENU BAR Functional menus appear alongside the general ArcMap menus: Inventory (Figure 22), Hazard (Figure 23), Analysis (Figure 24Error! Reference source not found.), and Results (Error! Reference source not found.). The menu bar is displayed at the top of the screen. Bold menu items indicate that the items are available; grayed out menu items are not available. The menus marked with a (*) as described in Table 2 Error! Reference source not found.below are the menus added by HAZUS to the ArcMap menu. TABLE 2 HAZUS MENU ITEMS File Edit View Inventory* Hazard* Analysis* Results* Execute standard software actions such as open table, save and print. Edit text and features including cut, copy, and paste. View data and map display. Zoom in or out. Show the geodatabase Table of Contents. Add, modify, delete and copy inventory information. Select hazard maps and the scenario event you wish to work with. Modify the analysis data, parameters and assumptions. Used to view and map analysis results. Installation Instructions for HAZUS-MH MR5 Page 12

13 Insert Selection Tools Help Customize the layout view. Locate multiple inventory items based on criteria you provide, and search for specific record information. Basic GIS utilities menu. Help files are available for ArcGIS only. Help files for HAZUS are not available in the current version, due to budget constraints. FIGURE 22 HAZUS INVENTORY MENU. FIGURE 23 HAZUS HAZARD MENU. FIGURE 24 HAZUS ANALYSIS MENU. Installation Instructions for HAZUS-MH MR5 Page 13

14 FIGURE 25 HAZUS RESULTS MENU. TOOL BAR A Tool bar is a set of buttons that execute commands by clicking on them. The standard HAZUS tool bar appears under the menu bar. The tool bar buttons are used for object selection, zooming in or out, moving around maps, obtaining information, measuring distance and creating points. Details of the ArcMap toolbars can be found in the ArcGIS Help Manual. Bold buttons indicate that the buttons are available; grayed out buttons are not available. HAZUS adds two tools to the ArcGIS toolbar shown in Error! Reference source not found.. The first tool button accesses the startup dialogue for selection, importing, or creation of an analysis study region. The wand tool allows switching among the hazard types (earthquake, flood, hurricane) the user has loaded. FIGURE 26 HAZUS ADDITIONS TO THE TOOLBAR. Region size and analysis time LIMITATIONS OF USE FOR EARTHQUAKE MODEL S.No Region Size Aggregation Time Analysis Time (Select All Without Contours) Analysis Time (Rapid Assessment) Tracts 6 Minutes 10 Minutes 7 Minutes Tracts 7 Minutes 30 Minutes 20 Minutes Tracts 30 Minutes 2 Hours 1 Hour 30 Minutes Installation Instructions for HAZUS-MH MR5 Page 14

15 Rapid assessment excludes the following modules: Damage by Building Count, All HPLF, AEBM, User Define Structures, All Transportation except Highways roads and bridges and Airports, All Utilities except Potable water and electric power system performance, Inundation, Contours Virtual Memory: S.No Region Size Min Virtual Memory (Scenario other than AAL) Min Virtual Memory (Scenario AAL Eq Only) Tracts 328 MB 512MB Tracts 512MB 848MB Tracts 1024MB 2048MB The user can expect the following limitations in using the Earthquake Model. 1. SQL Server 2005 Express has a size limit of 4 GB per database, which affects the size of the region you can analyze. The data for the 3 hazards share the 4 GB limit. To work-around the 4 GB database limit, the full version of Microsoft SQL Server 2005 must be used. Refer to Appendix N of Users Manual for details. 2. Components of independently developed data sets might not line up on maps, for example, the placement of bridges and roads, and facilities. 3. Inventory data and subsequently the Level 1 analysis functionality is unavailable for the US held territories. FREEING MEMORY USING SQL SERVER MANAGER SQL Server can often lock memory as a working set. Because memory is locked, HAZUS or other applications might receive out of memory errors or run slower. To work around this problem, restart the SQL Server service as follows: 1. Restart your computer by clicking Start, and then click Shut Down. In the What do you want the computer to do? list, click Restart. NOTE: Restarting will close all open applications, so be sure to save your work before choosing to re-start. 2. Restart SQL Server using the SQL Service Manager. Use the following process to open SQL Server Service Manager (SQL SSM) and restart the service: a. Close HAZUS, if it is running. b. Open a Command window (Start Run Cmd) Installation Instructions for HAZUS-MH MR5 Page 15

16 c. Type NET STOP MSSQL$HAZUSPLUSSRVR and hit Enter. You should see a message about the service stopped successfully. d. Type NET START MSSQL$HAZUSPLUSSRVR and hit Enter. You should see a message about the service started successfully. e. Close the Command window by typing Exit Installation Instructions for HAZUS-MH MR5 Page 16