Alibre Design Tutorial - Simple Revolve Translucent Glass Lamp Globe
|
|
|
- Mary Gregory
- 6 years ago
- Views:
Transcription
1 Alibre Design Tutorial - Simple Revolve Translucent Glass Lamp Globe Part Tutorial Exercise 2: Globe-1 In this Exercise, We will set System Parameters first. Then, in sketch mode, we will first Outline the Bowl with Arcs & Straight Lines. Then we will use the Revolve Feature to create the Bowl. Launch Alibre Design. From the Home window - select File, Work Offline. 1
2 Open a New Part workspace. From the Home window - select File, New, Part. Maximise the Part Workspace Window. Set Design Properties. Select File, Properties. 2
3 A) Select the Tab Marked "General" - In Description: insert the information: 'Translucent Glass Lamp Globe'. - In Curve Smoothness, Select the Radio Button marked 'Automatic'. B) Select the Tab Marked "Units" - Check off the Box 'Show Units for Dimensions'. - On 'Display Units' - confirm Unit: Inches, Format: Decimals and Precision: 4. Adjust if not. - On 'Angle' - Confirm Angle: Degrees and Precision: 4. Adjust to these parameters if not. 3
4 - On 'Spinner Increment' - for 'Length:' enter.0500 " and for 'Angle:' enter degrees. Adjust to these parameters if not. Press 'Tab' to move after editing them. C) Select the Tab marked 'Physical" - Change 'Accuracy:' to Low. - Click on the 'Calculate' Button. Notice the results. 4
5 D) Select the Tab marked "Apply Options" - On 'Apply Changes to' - Click the Radio Button beside 'The Current Document' - Click "Apply', then Click Close. Set Part Options. From Top Text Menu - Select - Tools > Options: > General Tab > Select or confirm checked off are: Global - Show popup on errors, Hints - All 5
6 Design - Prompt for newer versions, - Snap to working plane, - Prompt to edit sketch, - Prompt on detecting parameters with missing external link, - Reorient on extrude, - Keep model in View, - Prompt when not sketching on face. Show as Default - Planes, Annotations, and Sketches. Grid Tab> Spacing: Make X: " and Y: ", check off Display Grid, and Snap to Grid. Color Scheme Tab> For 'Scheme:' - confirm - Dark Background Scheme. Click 'OK'. 6
7 Start the Profile Sketch. From the Top Text Menu - Select Sketch > Activate Sketch. From the Top Text Menu - Select Sketch > Figures > Line. - Locate the Origin, click - move right 1.5" along the 'X-axis' and double click. Note the lower right hand corner of the workspace: (1.50,.00) this is the 'X' distance and 'Y' distance of this line from the origin. - Select - From the Top Text Menu - View > Zoom > Zoom to Fit. 7
8 Click on the finishing end of this line (Still in Line mode); drag up three grid squares (0.1500") - And left one Grid Square (0.0500"), double click. - Select - from the Top Text Menu - Sketch > Dimension. - Select the first line along its length, drag down slightly to locate the Dimension, click, then press Enter. - Select the first line, press the 'shift' key and hold, select the second line. 8
9 - Drag the mouse slightly up and in to the center of the angular space, click. - Select all the numbers in the selection box, and Type press Enter. - Select the now 45 degree angling Line, drag up and to the right slightly, click. - Edit the Numbers to ". Enter. - Select the Annotations of the Dimensions and drag them from between the dimension lines, out of the way. - Select Zoom to Fit from the Top Row of Icons (Magnifying Glass with Document). Click. 9
10 - Select Zoom Mode from the top Row of Icons (Magnifying Glass with '+'). Click. - Click in the work area near top, and drag down to zoom out. - Adjust the size of the base line to allow it to be about screen center. - From the Right Hand two columns of Icons, Select the 'Line' Icon from the inside Column (Sketch Menu Icons). Click. 10
11 - From the Origin, Click and Place a Vertical Line (90 Degrees) up the 'Y-Axis' ". Double Click. - Place a Horizontal Line approximately mid-way up the vertical line but not touching it. Make it about 1.0". - On the Same Column of Icons, select the fly-out triangle on the Third Icon from the Top, (Options), Select the 5 th Icon from the Right - 'Midline Constraint.' 11
12 - Select the Vertical Line, Click it, (It becomes Yellow as you move the cursor away), - Hold 'Shift' and Select the point at the end of the Horizontal line just placed. The line will move to the exact mid point of the vertical line. - Click in open space in the work area to de-select the Vertical Line. - From the Sketch Icons, Select 'Circular Arc - Center, Start, End'. 12
13 - Click on the Vertical Line Mid Point, then at the Top of the Vertical Line, then Sweep an Arc down to the Right, selecting the Bottom of the Vertical Line - at the Origin, - Click. - Select Zoom to Fit from the Top Row of Icons (Magnifying Glass with Document). Click. - Select - from the Top Text Menu - Sketch > Select. Click. (Note the Select 2 nd Down Icon in the Sketch Menu Icons). - Select the Horizontal Line at the Mid Point of the Vertical Line, Click. Press the Delete Key. 13
14 - Select - from the Top Text Menu - Sketch > Trim. (Note the Trim Figure Icon, 6 th up in the Sketch Menu Icons). - With Trim Activated, Select the Lowest portion of the Arc between the 45-Degree Line and the Origin. Click. - In the Top Icons, Select Zoom to Window Icon (Magnifying Glass with an Arrow). - Select a Window area around the now bottom of the arc and the 45 Degree Line. (Click, Drag, Release). 14
15 - With Trim Still Activated, Select the overhanging end of the 45-Degree Line. Click. - Just below the Activated 'Trim' Icon, Select 2D Fillet. The Fillet Figures Popup appears. - Click the Bottom of the Arc, Shift Click to select the 45-Degree Line. In the Fillet Figures Popup, see 'Figures to fillet' - Circular Arc<6> and Line<7>. - Set the Radius at.1500 " by clicking the down arrow selection. Click 'Apply'. Click 'Close.' 15
16 - Observe the now Filleted Intersection of the Arc and Line: - Select the 'Select' Icon in the Sketch Menu Icons. - Click the Annotation 'R.1500 "' and drag to re-locate the figure into clear space. - Select 'Offset' Icon in the Sketch Menu Icons. (3 rd up from Bottom). Edit Distance to.0500 " - Select: 45-Degree Line, Fillet Arc, and Upper Arc. (Hold Shift for 2 nd and 3 rd selections). - 16
17 In the Figures to offset: Line<7>, Circular Arc<8>, Circular Arc<6>. - If the Offset line is outside, click the Box beside 'Flip direction'. Observe offset lines move. - Leave 'Gap Type' set at 'Natural'. Click 'OK'. - Select the Line Icon. Connect a line between the inside and outside 45-Degree Lines. - Select Zoom to Fit. Click. - Select the 'Select' Icon in the Sketch Menu Icons. 17
18 - Select the Horizontal Line on the 'X-Axis'. Select Delete. - Select the Trim Icon, and Trim the Vertical Line, selecting between the Origin and the inside Offset Line. This will trim the long line, leaving inside and outside Arcs connected. Click. - If you get a Confirm Trim Figure popup, click Yes. - Select - from the Top Text Menu - Sketch > Analyse. Click the 'Analyse' Button - 18
19 - Observe the message below the 'Analyse' Button: 'No potential problems detected in the sketch for the current check levels ' Click 'Close'. - Select Zoom to Fit. Click. You should have this image. (Sample scaled to 33%) - You have now completed the Sketch for this Revolve Globe. Continue on to the Revolve Feature to complete it. Create the Revolve Globe from the Profile Sketch. - Select - from the Top Text Menu - Feature > Boss > Revolve. - In the Revolve Boss popup, change the Label: to Globe-Revolution<1>. 19
20 - Click in the selection for 'Axis:', Select the Vertical Axis - the 'Y-Axis'. - Notice the Preview Revolve Steps. Click 'OK'. There is your Globe! - Select Zoom to Fit. Click. This Centers the Globe in the Part Window. Notice the Globe Has a Faceted or Flat Spot series of edges. To correct this, Adjust Curve Smoothness. Select File > Properties. (Note the keyboard shortcut: Alt+Enter) Select the Tab "General" 20
21 - In Curve Smoothness, Select the 'Manual' Radio Button, Change 'Minimal Circular Facets:' Edit 18 to become 48. (Highlight <click-drag> 18, type in 48) - Click Apply. Notice the Ball Surface become Smoother. Click 'Close.' To Finish the Special Touches: - Select from the Top Text Menu, Edit > Color Properties > - Use the Mouse to move the Slider or edit the 0% in Reflectivity, and change it to 10%. (Click the mouse once on the right side of the slider button to move it 10%) - Click on the Color Button, > 21
22 - Select the White Square in the lower right corner of the Basic Colors. Click 'OK' - Select the Opacity 100% and change the 100 to 90, press 'Tab'. Click 'OK'. Select - File - Save As (Note the Keyboard Shortcut: Ctrl+Shift+S) In the Name: Field - change 'New Part (1)' to Globe-1. Create a New Folder to save this file in, called 'Tutorials'. Slick 'Save'. To see the Globe in Different Angles, click the mouse in the work area, Press and hold both Left and Right mouse buttons, and move the mouse around to control the viewing position of the part. Congratulations! You have completed the Translucent Glass Lamp Globe! (Complete Version) Give me feedback on this tutorial! Send If you found this and you don't yet have a copy of Alibre Design - Click this Link for a 30-Day Free Trial Copy! 22
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
Modeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
Exercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
TRAINING SESSION Q2 2016
There are 8 main topics in this training session which focus on the Sketch tools in IRONCAD. Content Sketch... 2 3D Scene Background Settings... 3 Creating a new empty Sketch... 4 Foam with cut out for
Lesson 1: Creating T- Spline Forms. In Samples section of your Data Panel, browse to: Fusion 101 Training > 03 Sculpt > 03_Sculpting_Introduction.
3.1: Sculpting Sculpting in Fusion 360 allows for the intuitive freeform creation of organic solid bodies and surfaces by leveraging the T- Splines technology. In the Sculpt Workspace, you can rapidly
On the ribbon bar, click the Select from Sketch button.
On the Features toolbar, click the Revolved Protrusion command. On the ribbon bar, click the Select from Sketch button. In the part window, select the Sketch, and on the ribbon bar click the Accept button.
SolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts
Inventor (5) Module 4B: 4B- 1 Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts In Module 4B, we will learn how to create
Autodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
StickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
Module 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
3D Design with 123D Design
3D Design with 123D Design Introduction: 3D Design involves thinking and creating in 3 dimensions. x, y and z axis Working with 123D Design 123D Design is a 3D design software package from Autodesk. A
SolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
Autodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
SOLIDWORKS: Lesson III Patterns & Mirrors. UCF Engineering
SOLIDWORKS: Lesson III Patterns & Mirrors UCF Engineering Solidworks Review Last lesson we discussed several more features that can be added to models in order to increase their complexity. We are now
CO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
Introduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
Revit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment
ANSYS Workbench Tutorial Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
Battery Holder. Chapter 9. Boat. A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. SolidWorks 10 BATTERY HOLDER AA BOAT Page 9-1
Chapter 9 Boat Battery Holder A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. AA Step 2. Click Front (plane) in the Feature Manager and click Sketch from the Content toolbar, Fig. 1.
Solidworks 2006 Surface-modeling
Solidworks 2006 Surface-modeling (Tutorial 2-Mouse) Surface-modeling Solid-modeling A- 1 Assembly Design Design with a Master Model Surface-modeling Tutorial 2A Import 2D outline drawing into Solidworks2006
Creating T-Spline Forms
1 / 28 Goals 1. Create a T-Spline Primitive Form 2. Create a T-Spline Revolve Form 3. Create a T-Spline Sweep Form 4. Create a T-Spline Loft Form 2 / 28 Instructions Step 1: Go to the Sculpt workspace
Module 5: Creating Sheet Metal Transition Piece Between a Square Tube and a Rectangular Tube with Triangulation
1 Module 5: Creating Sheet Metal Transition Piece Between a Square Tube and a Rectangular Tube with Triangulation In Module 5, we will learn how to create a 3D folded model of a sheet metal transition
CO2 Rail Car. Wheel Rear Px. on the Command Manager toolbar.
Chapter 6 CO2 Rail Car Wheel Rear Px A. Sketch Construction Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front (plane) in the Feature Manager (left panel), Fig. 1. Step
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
Chapter 4 Feature Design Tree
4-1 Chapter 4 Feature Design Tree Understand Feature Interactions Use the FeatureManager Design Tree Modify and Update Feature Dimensions Perform History-Based Part Modifications Change the Names of Created
Beginning Tutorial the Lego
Beginning Tutorial the Lego In this tutorial, you will construct a simple hollowed-out block with a hole in it (looks like a Lego). You will learn the basics of creating and modifying sketches and features.
Parametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
Module 4A: Creating the 3D Model of Right and Oblique Pyramids
Inventor (5) Module 4A: 4A- 1 Module 4A: Creating the 3D Model of Right and Oblique Pyramids In Module 4A, we will learn how to create 3D solid models of right-axis and oblique-axis pyramid (regular or
TUTORIAL 2. OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs.
TUTORIAL 2 OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs. GETTING STARTED: 1. Open the SolidWorks program. 2. Open a new part file.
Elise Moss Revit Architecture 2017 Basics From the Ground Up SDC. Better Textbooks. Lower Prices.
Elise Moss Revit Architecture 2017 Basics From the Ground Up SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
CATIA V5 Parametric Surface Modeling
CATIA V5 Parametric Surface Modeling Version 5 Release 16 A- 1 Toolbars in A B A. Wireframe: Create 3D curves / lines/ points/ plane B. Surfaces: Create surfaces C. Operations: Join surfaces, Split & Trim
Speedway. Body. (S) on the Sketch toolbar. Fig. 1
Chapter 1 A. New Part. Step 1. Click File Menu > New. Speedway Body Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Construction Rectangle. Step 1. Click Right Plane in the Feature Manager
Chapter 6: Create Surfaces from Curves
A common way of working in 3-D is to draw curves that represent edges, profiles, cross-sections, or other surface features and then to use surfacing commands to create surfaces from those curves. Edge
Autodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
Doctor Walt s Solid Edge Version 19 Workbook 137
Still using the SMART DIMENSION Tool, click on the left vertical edge of the sketch. Move the cursor to the left and click to set the text position. Type 1.5 for the value and hit the ENTER Key. Next,
to display both cabinets. You screen should now appear as follows:
Technical Support Bulletin: AllenCAD Tutorial Last Updated November 12, 2005 Abstract: This tutorial demonstrates most of the features of AllenCAD necessary to design or modify a countertop using the program.
1. Open up PRO-DESKTOP from your programmes menu. Then click on the file menu > new> design.
Radio Tutorial Draw your spatula shape by:- 1. Open up PRO-DESKTOP from your programmes menu. Then click on the file menu > new> design. 2. The new design window will now open. Double click on design 1
Tutorial 7: Adding Features and Editing Line and Polygon Layers
Tutorial 7: Adding Features and Editing Line and Polygon Layers Tutorial Content 7.1. When should I use a line layer to represent data? 7.2. How do I add line features? 7.3. How to use the snapping tool?
A Guide to Autodesk Maya 2015
A Guide to Autodesk Maya 2015 Written by Mitchell Youngerman Table of Contents Layout of Toolbars...pg 1 Creating Objects...pg 2 Selecting & Deselecting Objects...pg 3 Changing Perspective... pg 4 Transforming
A Comprehensive Introduction to SolidWorks 2011
A Comprehensive Introduction to SolidWorks 2011 Godfrey Onwubolu, Ph.D. SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Chapter 2 Geometric Construction Tools Objectives: When
Lesson 1 Parametric Modeling Fundamentals
1-1 Lesson 1 Parametric Modeling Fundamentals Create Simple Parametric Models. Understand the Basic Parametric Modeling Process. Create and Profile Rough Sketches. Understand the "Shape before size" approach.
Design a Simple Fan in 123D Design
Design a Simple Fan in 123D Design Learn to use 123D Design to make and print this simple fan. 123D Design is a free, powerful, yet simple 3D creation and editing tool. It allows you to design and build
Nose Cone. Chapter 4. Rocket 3D Print. A. Revolve. Step 1. Click File Menu > New, click Part and OK. SOLIDWORKS 16 Nose Cone ROCKET 3D PRINT Page 4-1
Chapter 4 Rocket 3D Print Nose Cone A. Revolve. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the content toolbar, Fig. 1. Step
solidthinking Environment...1 Modeling Views...5 Console...13 Selecting Objects...15 Working Modes...19 World Browser...25 Construction Tree...
Copyright 1993-2009 solidthinking, Inc. All rights reserved. solidthinking and renderthinking are trademarks of solidthinking, Inc. All other trademarks or service marks are the property of their respective
Adding Fillet, Shell, and Draft Features
Learn how to: Adding Fillet, Shell, and Draft Features I-DEAS Tutorials: Fundamental Skills add draft features add fillet features use the Ball Corner Fillet option add shell features Before you begin...
Skateboard. Hanger. in the Feature Manager and click Sketch. (S) on the Sketch. Line
Chapter 3 Skateboard Hanger A. Sketch 1. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane from the Content toolbar, Fig. 1. in the Feature Manager and click Sketch Step
F1 Car. Wheel. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. (S) on the
Chapter 3 F1 Car Wheel A. Sketch Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Step 3.
Tutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
Quick Crash Scene Tutorial
Quick Crash Scene Tutorial With Crash Zone or Crime Zone, even new users can create a quick crash scene diagram in less than 10 minutes! In this tutorial we ll show how to use Crash Zone s unique features
In this tutorial, you will create the model of a chair, as shown in the image below, using the extended primitives and modifiers.
Office Chair In this tutorial, you will create the model of a chair, as shown in the image below, using the extended primitives and modifiers. Creating the Project Folder Create a new project folder with
Structural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment. Kent L. Lawrence
ANSYS Workbench Tutorial Structural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
CATIA Surface Design
CATIA V5 Training Exercises CATIA Surface Design Version 5 Release 19 September 2008 EDU_CAT_EN_GS1_FX_V5R19 Table of Contents (1/2) Creating Wireframe Geometry: Recap Exercises 4 Creating Wireframe Geometry:
Adobe Illustrator CS5 Part 2: Vector Graphic Effects
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Adobe Illustrator CS5 Part 2: Vector Graphic Effects Summer 2011, Version 1.0 Table of Contents Introduction...2 Downloading the
Module 1B: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of A Truncated Right Prism
Inventor (5) Module 1B: 1B- 1 Module 1B: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of A Truncated Right Prism In this Module, we will learn how to create
Kitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
7/21/2009. Chapters Learning Objectives. Fillet Tool
Chapters 12-13 JULY 21, 2009 Learning Objectives Chapter 12 Chapter 13 Use the FILLET tool to draw fillets, rounds, and other rounded corners. Place chamfers and angled corners with the CHAMFER tool. Separate
S206E Lecture 3, 5/15/2017, Rhino 2D drawing an overview
Copyright 2017, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2017 Rhino 2D drawing is very much the same as it is developed in AutoCAD. There are a lot of similarities in interface and in executing
ANSYS AIM Tutorial Stepped Shaft in Axial Tension
ANSYS AIM Tutorial Stepped Shaft in Axial Tension Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Contents: Problem Specification 3 Learning Goals 4 Pre-Analysis & Start Up 5 Calculation
SOLIDWORKS 2016 and Engineering Graphics
SOLIDWORKS 2016 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
Ansoft HFSS Windows Screen Windows. Topics: Side Window. Go Back. Contents. Index
Modifying Coordinates Entering Data in the Side Windows Modifying Snap To Absolute Relative Each screen in divided up into many windows. These windows can allow you to change the coordinates of the model,
L E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
Technique or Feature Where Introduced
Part 6: Keypad 4 Mirrored features Patterned features First extrusion Rounded corners In the earpiece part, you defined a radial pattern, one that created new instances of a feature at intervals around
Vectorworks Essential Tutorial Manual by Jonathan Pickup. Sample
Vectorworks Essential Tutorial Manual by Jonathan Pickup Table of Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 Real World Sizes... iv 0.3 New Ways of Drawing... v 1.0 Introduction
Parametric Modeling. With. Autodesk Inventor. Randy H. Shih. Oregon Institute of Technology SDC PUBLICATIONS
Parametric Modeling With Autodesk Inventor R10 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com 2-1 Chapter 2 Parametric
Create a Rubber Duck. This tutorial shows you how to. Create simple surfaces. Rebuild a surface. Edit surface control points. Draw and project curves
Page 1 of 24 Create a Rubber Duck This exercise focuses on the free form, squishy aspect. Unlike the flashlight model, the exact size and placement of the objects is not critical. The overall form is the
ME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
VCarve Pro. Vectric Ltd Unit 2B Dunstall Court Astwood Lane Feckenham B96 6QH UK.
What's New In VCarve Pro Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd has no control over how the software described in this manual might
2D & 3D CAD SOFTWARE USER MANUAL. AutoQ3D CAD for ipad & iphone
Type to enter text 2D & 3D CAD SOFTWARE USER MANUAL AutoQ3D CAD for ipad & iphone AUTOQ3D TEAM FIRST EDITION AutoQ3D CAD for ipad & iphone 2D / 3D cad software user manual 2015 by AutoQ3D Team. All rights
How to Make a Sign. Eagle Plasma LLC. Accessing the included step by step.dxf files
Eagle Plasma LLC How to Make a Sign Accessing the included step by step.dxf files The following tutorial is designed to teach beginners, screen by screen, to create a simple sign project. In this lesson
2 Solutions Chapter 3. Chapter 3: Practice Example 1
1 Solutions This section includes the step by step solutions for the practice exercise for the following chapters and sections: Chapter 3 Chapter 4 Chapter 5 Chapter 11: Rainbow Springs sample test Final
TRAINING GUIDE. Sample not. for Distribution LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF
TRAINING GUIDE LATHE-LESSON-1 FACE, ROUGH, FINISH AND CUTOFF Mastercam Training Guide Objectives You will create the geometry for Lathe-Lesson-1, and then generate a toolpath to machine the part on a CNC
Lecture 4, 5/27/2017, Rhino Interface an overview
數字建築與城市设计 Spring 2017 Lecture 4, 5/27/2017, Rhino Interface an overview Copyright 2017, Chiu-Shui Chan. All Rights Reserved. This lecture concentrates on the use of tools, 3D solid modeling and editing
Chapter 2 Parametric Modeling Fundamentals
2-1 Chapter 2 Parametric Modeling Fundamentals Create Simple Extruded Solid Models Understand the Basic Parametric Modeling Procedure Create 2-D Sketches Understand the Shape before Size Approach Use the
Tutorial 01 Quick Start Tutorial
Tutorial 01 Quick Start Tutorial Homogeneous single material slope No water pressure (dry) Circular slip surface search (Grid Search) Intro to multi scenario modeling Introduction Model This quick start
GETTING STARTED WITH MASTERCAM SOLIDS
GETTING STARTED WITH MASTERCAM SOLIDS June 2017 GETTING STARTED WITH MASTERCAM SOLIDS June 2017 2017 CNC Software, Inc. All rights reserved. Software: Mastercam 2018 Terms of Use Use of this document is
NURBS modeling for Windows. Training Manual Level 1
NURBS modeling for Windows Training Manual Level 1 Rhino Level 1 Training 2nd Ed.doc Robert McNeel & Associates 1997-2000 All Rights Reserved. Printed in U.S.A. Copyright by Robert McNeel & Associates.
Autodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360
Overview Modeling techniques in Fusion 360 Modeling in Fusion 360 is quite a different experience from how you would model in conventional history-based CAD software. Some users have expressed that it
AUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
Getting Started with Mastercam Solids. March 2016
Getting Started with Mastercam Solids March 2016 Mastercam 2017 Solids Getting Started TERMS OF USE Date: March 2016 Copyright 2016 CNC Software, Inc. All rights reserved. Software: Mastercam 2017 Use
TOOLPATHS TRAINING GUIDE. Sample. Distribution. not for MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR
TOOLPATHS TRAINING GUIDE MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR Mill-Lesson-4 Objectives You will generate a toolpath to machine the part on a CNC vertical milling machine. This lesson covers the following
Randy H. Shih. Jack Zecher PUBLICATIONS
Randy H. Shih Jack Zecher PUBLICATIONS WWW.SDCACAD.COM AutoCAD LT 2000 MultiMedia Tutorial 1-1 Lesson 1 Geometric Construction Basics! " # 1-2 AutoCAD LT 2000 MultiMedia Tutorial Introduction Learning
HYPERSTUDIO TOOLS. THE GRAPHIC TOOL Use this tool to select graphics to edit. SPRAY PAINT CAN Scatter lots of tiny dots with this tool.
THE BROWSE TOOL Us it to go through the stack and click on buttons THE BUTTON TOOL Use this tool to select buttons to edit.. RECTANGLE TOOL This tool lets you capture a rectangular area to copy, cut, move,
Adjust model for 3D Printing. Direct modeling tools 13,0600,1489,1616(SP6)
Adjust model for 3D Printing Direct modeling tools 13,0600,1489,1616(SP6) Sometimes, the model needs to be prepared or adapted for printing. Adding material, change of a draft angles are an example. In
Beginning Paint 3D A Step by Step Tutorial. By Len Nasman
A Step by Step Tutorial By Len Nasman Table of Contents Introduction... 3 The Paint 3D User Interface...4 Creating 2D Shapes...5 Drawing Lines with Paint 3D...6 Straight Lines...6 Multi-Point Curves...6
In this exercise, you will convert labels into geodatabase annotation so you can edit the text features.
Instructions: Use the provided data stored in a USB. For the report: 1. Start a new word document. 2. Follow an exercise step as given below. 3. Describe what you did in that step in the word document
CS Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1
CS 1033 Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1 Upon completion of this lab, you should be able to: Open, create new, save
The scan tools are used to convert and edit bitmap images so that they can be cut or routed by the Torchmate.
Scan Tools The scan tools are used to convert and edit bitmap images so that they can be cut or routed by the Torchmate. Upon clicking the Scan tool, the flyout opens exposing the two scanning options.
Autodesk Inventor 2016 Learn by doing. Tutorial Books
Autodesk Inventor 2016 Learn by doing Tutorial Books Copyright 2015 Kishore This book may not be duplicated in any way without the express written consent of the publisher, except in the form of brief
Delta Dart. Socket. (L) on the Sketch toolbar. Fig. 1. (S) on the Sketch toolbar. on the Sketch toolbar. on the Standard Views toolbar.
Chapter 6 Delta Dart Socket A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. Step
Introduction to SolidWorks for Technology. No1: Childs Toy
Introduction to SolidWorks for Technology No1: Childs Toy Table of Contents Table of Contents... 1 Introduction... 2 Part Modelling: Cab... 3 Part Modelling: Base... 6 Part Modelling: Wheel... 12 Assembly:
SolidWorks 2013 and Engineering Graphics
SolidWorks 2013 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following
Blender Lesson Ceramic Bowl
Blender Lesson Ceramic Bowl This lesson is going to show you how to create a ceramic looking bowl using the free program Blender. You will learn how to change the view, add, delete, scale and edit objects
JSS. Ping Pong Ball. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. on the Sketch toolbar.
Chapter 18 JSS Ping Pong Ball A. Half Circle Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the Context toolbar, Fig.
Introduction And Overview ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Introduction And Overview 2006 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary The ANSYS Workbench represents more than a general purpose engineering tool. It provides a highly integrated engineering
QuickTutor. An Introductory SilverScreen Modeling Tutorial. Solid Modeler
QuickTutor An Introductory SilverScreen Modeling Tutorial Solid Modeler TM Copyright Copyright 2005 by Schroff Development Corporation, Shawnee-Mission, Kansas, United States of America. All rights reserved.
Doctor Walt s Tips and Tricks # 37 Creating an Elbow Configurator Using Dynamic Face
1 Doctor Walt s Tips and Tricks # 37 Creating an Elbow Configurator Using Dynamic Face Feature-Based Solid Modelers harp on the fact that they can be used to create fancy part configurators to make families
Module 6B: Creating Poly-Conic Sheet Metal Pieces for a Spherical Space
1 Module 6B: Creating Poly-Conic Sheet Metal Pieces for a Spherical Space In Module 6B, we will learn how to create a folded 3D model of an approximate 2D flat pattern for a 120-inch or 10-foot diameter