Version Beta, pre-release. zspace Studio Demonstration Script

Size: px
Start display at page:

Download "Version Beta, pre-release. zspace Studio Demonstration Script"

Transcription

1 zspace Studio Demonstration Script Version Beta, pre-release zspace.com zspace Studio Demonstration Script

2 zspace is a registered trademark of zspace, Inc. All other trademarks are the property of their respective owners. zspace, Inc. 2014

3 Contents Setup...1 Demo...5 visit us online at zspace.com

4

5 Setup This section will help you create your account information and select models to use during your demonstration. 1. Launch the zspace Studio application and wait for the login screen to appear. 2. Create a login for student by entering that into the Username field. You do not need to enter a password. (Note: You do not need to press Alt-T for a teacher account for this demonstration.) a. If you re logged in under a different username, you will see it in the dialog box and at the top left of the screen. Click on Logout and then enter student and click Log In. b. The following dialog box appears. 1

6 c. You can leave the first and last names blank. You can leave the password fields blank. Click Create and wait to be logged in. (This may take a few seconds.) 3. If prompted to select a server, select Offline. d. zspace Studio may not prompt you to choose a server. If you do not see the Server List window, Studio has automatically selected Offline. After hitting Create in Step 2c above, you will be directly taken to the main menu shown in Step 4 and you can proceed as normal from that point. Any type of user can access the server list window at a later time by clicking on the words Offline connection. in the bottom right of the main menu. 4. Select Sandbox from the right-hand panel in the main menu. 2

7 a. You will see a loading screen. It will last 30 seconds or more. 5. On the Control Bar, select the Object Library icon to bring up the published models. 6. Locate models and mark them as Favorites. a. Many users find it is easier to navigate the Object Library using the mouse than with the stylus. Use either during setup, but try to use only the stylus for the actual demonstration. b. To locate a model, type its name in the Search box and press Enter. Start with Tree Trunk. c. Mark the model as a favorite by clicking on the box in the model s upper right corner. 3

8 d. Click on Clear, then repeat the search for these model names: Saturn, Mammoth (w/ Skeleton), Ibuprofen, Centrifugal Pump, Torque Converter, Turbocharger, Female Head, and Female Arm. Click on Clear between each search. Mark each as a Favorite. If a model does not appear right away, try switching the first letter of the word between upper and lower case. e. Click on Clear, and check that you have 9 models in the Favorites category at the top left sidebar. 4

9 Demo This section assumes you have completed all the setup steps. We suggest you review the following models as described below to demonstrate the existing functions of zspace Studio: Tree Trunk Layers - to demonstrate the basic functions and labels. It is understandable and everyone knows what the object is. Turbocharger - to show off measurement with a complex mechanical model. Torque Converter - to show off another kind of measurement and scaling. Female Head - to show off the use of the cutting plane tool with an object with complex internal geometry. The other recommended favorite models provide a few other rich examples of different types of models: Mammoth - Shows the richness of detail in an object and its internal skeleton. Saturn - Shows the parts of the planet as part of the astronomy model set. Ibuprofen - Shows off a chemical model in zspace. WARNING There are a few features that will not be used for demonstrations. They are listed below with their icons: Tour Builder - You can create snapshots, but when you play them back the results are random. Sometimes clicking on a slide to play it back does nothing. 5

10 Viewpoints - You can create viewpoint images, but cannot recall them. Start your demo: 1. Log into the student account you made during Setup. 2. Select Sandbox from the right-hand panel. Wait for the loading screen to disappear after 30 seconds. 3. Open the Object Library and select the Favorites category (1st tab in the top left sidebar). The 9 models you marked during setup will appear. Tree Trunk Layers 4. Select Tree Trunk Layers using the stylus and drag it to the open area. When you select the model, the flat image will turn into a 3D cube; that is what you drag and drop into the scene. 6

11 5. Close the Object Library for now by clicking on the X in the upper right corner of the window. 6. Click on Move and drag the model around the screen. When selected, the Move icon will be blue. The labels will move with the model. 7. Click on Dissect. When selected, the Dissect icon will be blue. Click and drag on the layers on the right side of the tree trunk to take it apart. The labels follow the pieces they are attached to. 7

12 8. Toggle the labels on and off by clicking the Hide/Show icon (it looks like an eye) in the Control Bar, then selecting Labels. 8

13 9. Click Reset Parts to snap the pieces back to the model. 10. Hit Dissect and take some pieces off the model. Move those pieces to the trashcan and show that you can throw out individual pieces of a model. Throw out a few pieces. 11. Hit Move and move the rest of the model to the trashcan to remove it from the scene. When using Move mode, all the remaining pieces will move together. a. You can also remove the model from the scene by selecting Reset Activity in the Control Bar. Demonstrate this if you cannot get the trashcan icon to work. Turbocharger 12. Reopen the Object Library. This time, drag the Turbocharger into the scene using the stylus. 13. Close the Object Library for now using the x in the upper right corner of the window. 14. In the right sidebar, select Tools and then select the Straight Ruler icon. 15. Show how you can use this measuring tool. Features to highlight are: a. Dragging the white arrows on the sides of the measure to change the length. 9

14 b. Dragging the tendrils down will let you accurately pick a section of the model to measure. The tendrils will stay in place when you let them go. c. Click the gray circle to the right of the measurement number to change the units of measurement. d. Measurements are taken as the distance between the points at the ends of the tendrils. 16. Remove the Turbocharger model from the scene by selecting Reset Activity in the Control Bar. 10

15 Torque Converter 17. Reopen the Object Library and drag the Torque Converter into the scene. 18. Close the Object Library for now. 19. Dissect the model into a few parts, then return to the Move stylus mode. (Note: Bring at least one curved piece to the forefront.) 20. Under Tools, this time select the Surface Ruler. 21. Show the differences of this measuring tool. The Surface Ruler functions similarly to the Straight Ruler, but: a. The tendrils ending with a vertical rectangle will snap to a model and try to automatically measure a surface. You can show this on a flat surface and a curved one. 11

16 b. You can drag any of the tendrils at an angle to position them. The rectangle turns from vertical to horizontal when grabbed with the stylus. c. Pressing Freeze (the button with a padlock on it) on the ruler freezes the position of all the tendrils. When you move the measuring tool, the tendrils won t move on their own. d. Pressing Reset (the button with the circular arrow) on the ruler turns the horizontal tendrils on the ruler back into vertical tendrils. e. Measurements are taken as the straight-line distance between two tendril end-points on the measure. When measuring a curved surface, you can use both the vertical and horizontal rectangles to make shorter distances to measure between, giving you a more accurate measurement overall. 22. Press the icon for Reset Parts in the Control Bar to return the Torque Converter to one piece. Remove the measuring tools from the scene using the trashcan. 23. In the right sidebar, select Objects. This shows you all the models you ve recently used. Drag the Turbocharger back into the scene to join the Torque Converter. Position them side by side. 12

17 24. Select the Scale icon on the Control Bar. Then choose Show Scale in the dropdown menu. 25. A cube outline will appear around each model. Drag the blue cube in the corner to change the scale of the model. Make one model very large and the other small. 13

18 26. Select the Scale icon at the top again, this time selecting Hide Scale from the dropdown menu. The scale boxes will disappear, but the models will stay at the size you left them. 27. Select Add Note from the top menu bar. This lets you add your own notes to the scenes you are creating. Features to highlight are: a. Adding text. b. Selecting the orange arrow and attaching it to the model. 14

19 c. You are able to move this note at any time. 28. Use the Reset Activity icon on the Control Bar to empty the scene. Mammoth (w/ Skeleton) and Female Arm 29. Reopen the Object Library. 30. Drag the Female Arm and the Mammoth (w/ Skeleton) into the scene. 31. Close the Object Library for now. 32. Select the Scale icon at the top again, this time selecting Relative Scale from the dropdown menu. 33. Relative Scale reflects the real life sizes of the models. The human arm will be much smaller compared to the mammoth. 15

20 34. Use the Reset Activity icon on the Control Bar to empty the scene. Female Head 35. Reopen the Object Library. 36. Drag the Female Head into the scene. (This model may take a while to load.) 37. Close the Object Library for now. 38. Select the Cutting Plane from the Tools section of the right sidebar. 39. Show how the cutting plane is grey when it is not highlighted, but becomes a bright orange when you hover the stylus over it. 40. Use the cutting plane to show how you can view the insides of a model. Move the cutting plane back and forth through the model head. 41. Leave the cutting plane in the head, then press the Move stylus mode. Move the model around, showing that the cutting plane stays with the model. 16

21 42. Add another cutting plane into the scene and adjust its angle. Show both cutting planes intersecting to create cross sections in the human head. 43. Select Screenshots in the Control Bar. You re going to take a picture of the cross-sectioned head. 17

22 44. The screenshot window appears at the top right of screen, and the end of the stylus pointer will become a viewfinder. You can zoom in and out by pressing the left and right stylus buttons. You may have to adjust the position of your hand or move the model further back into the environment as well. 45. Click the center button of the stylus to take a screenshot. It will appear in the window at the upper right of the screen. You can take lots of screenshots. Click on the trash icon in the screenshot s thumbnail to delete unwanted ones. Screenshots will be saved in the zspace Saved Files folder on your desktop. 46. Turn off screenshot mode by clicking on the Screenshots icon again or by clicking the x icon in the upper right of the screenshot window. 47. Grab the two cutting planes and drag them to the trash to remove them from the scene. 18

23 48. Hit Dissect and take apart the Female Head model, scattering pieces around the scene. 49. Select Zoom from the stylus mode section. 50. Point the stylus at a piece of the human head and hit the center stylus button. The camera will zoom and rotate to give you a different viewing angle of the piece. You can do this multiple times to move around the scene and get closer to individual model pieces. 19

24 51. Hit the right stylus button to zoom back out to the default view. Leave the pieces of the human head scattered around the scene. 52. Select the Save icon in the Control Bar. You use this feature to save whatever is currently in the scene you ve made. Select Save As to save your scene. (Note: Save will also prompt the same saving window when it is your first time saving.) a. The default name for a saved scene is the date and time when you hit save. You can enter a new name for your saved scene if you d like (ie: Female Head), then select Save. It may take awhile for the save to complete. 53. Return to the home screen by selecting the Home icon. 20

25 a. You will see your saved scene under the Sandbox Activities tab in the main menu. b. You can delete a saved scene by selecting the trashcan icon to the right of the scene s title. 21

Version Beta, pre-release. zspace Studio Users Guide

Version Beta, pre-release. zspace Studio Users Guide zspace Studio Users Guide Version 1.0-2014 Beta, pre-release zspace.com zspace Studio Users Guide zspace is a registered trademark of zspace, Inc. All other trademarks are the property of their respective

More information

Bringing Learning to Life in VR. Teacher s Guide to Cyber Anatomy 3D

Bringing Learning to Life in VR. Teacher s Guide to Cyber Anatomy 3D Bringing Learning to Life in VR Teacher s Guide to Cyber Anatomy 3D Contents How to Get the Most From Cyber Anatomy 3D for zspace Transform your classroom with compelling, innovative technology that can

More information

Adobe Premiere Elements Tutorial

Adobe Premiere Elements Tutorial Adobe Premiere Elements Tutorial Starting a New Project To import movie clips from a digital video camera, click on the Capture Video button. You will be prompted to name your project and choose a location

More information

Before you get started, make sure you have your section code since you ll need it to enroll. You can get it from your instructor.

Before you get started, make sure you have your section code since you ll need it to enroll. You can get it from your instructor. Student manual Table of contents Table of contents... 1 Registration... 2 If you have a PIN code:... 2 If you're using a credit card:... 2 Login/Logout... 3 Login... 3 Dashboard... 3 Logout... 3 Trouble

More information

Anatomy of a Window (Windows 7, Office 2010)

Anatomy of a Window (Windows 7, Office 2010) Anatomy of a Window (Windows 7, Office 2010) Each window is made up of bars, ribbons, and buttons. They can be confusing because many of them are not marked clearly and rely only on a small symbol to indicate

More information

A Guide to Autodesk Maya 2015

A Guide to Autodesk Maya 2015 A Guide to Autodesk Maya 2015 Written by Mitchell Youngerman Table of Contents Layout of Toolbars...pg 1 Creating Objects...pg 2 Selecting & Deselecting Objects...pg 3 Changing Perspective... pg 4 Transforming

More information

Wordpress Training Manual

Wordpress Training Manual The Dashboard... 2 If this is your first time logging in:... 2 How do I change my password or email address?... 3 Search Engine Optimization (SEO)... 4 SEO for Pages... 4 SEO for Images... 5 Managing Pages...

More information

2 SELECTING AND ALIGNING

2 SELECTING AND ALIGNING 2 SELECTING AND ALIGNING Lesson overview In this lesson, you ll learn how to do the following: Differentiate between the various selection tools and employ different selection techniques. Recognize Smart

More information

Windows XP. A Quick Tour of Windows XP Features

Windows XP. A Quick Tour of Windows XP Features Windows XP A Quick Tour of Windows XP Features Windows XP Windows XP is an operating system, which comes in several versions: Home, Media, Professional. The Windows XP computer uses a graphics-based operating

More information

Quick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3

Quick Start Guide - Contents. Opening Word Locating Big Lottery Fund Templates The Word 2013 Screen... 3 Quick Start Guide - Contents Opening Word... 1 Locating Big Lottery Fund Templates... 2 The Word 2013 Screen... 3 Things You Might Be Looking For... 4 What s New On The Ribbon... 5 The Quick Access Toolbar...

More information

Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.

Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out. Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also

More information

CHAPTER 1 COPYRIGHTED MATERIAL. Getting to Know AutoCAD. Opening a new drawing. Getting familiar with the AutoCAD and AutoCAD LT Graphics windows

CHAPTER 1 COPYRIGHTED MATERIAL. Getting to Know AutoCAD. Opening a new drawing. Getting familiar with the AutoCAD and AutoCAD LT Graphics windows CHAPTER 1 Getting to Know AutoCAD Opening a new drawing Getting familiar with the AutoCAD and AutoCAD LT Graphics windows Modifying the display Displaying and arranging toolbars COPYRIGHTED MATERIAL 2

More information

DDX-R Quick Start Guide

DDX-R Quick Start Guide DDX-R Quick Start Guide Imaging Support 1-855-726-9995 www.scilvet.com Contents USING DDX-R... 2 Opening a Patient File... 2 Opening a New Patient File... 3 Screen Layout... 3 ACQUIRING IMAGES ON A PATIENT...

More information

Get comfortable using computers

Get comfortable using computers Mouse A computer mouse lets us click buttons, pick options, highlight sections, access files and folders, move around your computer, and more. Think of it as your digital hand for operating a computer.

More information

Manage Folders and Files in Microsoft Office. Mrs. Eggen and Ms. Miller GMS and HMS Digital Literacy

Manage Folders and Files in Microsoft Office. Mrs. Eggen and Ms. Miller GMS and HMS Digital Literacy Manage Folders and Files in Microsoft Office Mrs. Eggen and Ms. Miller GMS and HMS Digital Literacy Accessing Documents Computer vs. Microsoft Word: Computer will always show all documents. Access files

More information

You can also search online templates which can be picked based on background themes or based on content needs. Page eleven will explain more.

You can also search online templates which can be picked based on background themes or based on content needs. Page eleven will explain more. Microsoft PowerPoint 2016 Part 1: The Basics Opening PowerPoint Double click on the PowerPoint icon on the desktop. When you first open PowerPoint you will see a list of new presentation themes. You can

More information

Step 1: Create A New Photoshop Document

Step 1: Create A New Photoshop Document Snowflakes Photo Border In this Photoshop tutorial, we ll learn how to create a simple snowflakes photo border, which can be a fun finishing touch for photos of family and friends during the holidays,

More information

2.2 - Layouts. Bforartists Reference Manual - Copyright - This page is Public Domain

2.2 - Layouts. Bforartists Reference Manual - Copyright - This page is Public Domain 2.2 - Layouts Introduction...2 Switching Layouts...2 Standard Layouts...3 3D View full...3 Animation...3 Compositing...3 Default...4 Motion Tracking...4 Scripting...4 UV Editing...5 Video Editing...5 Game

More information

This lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space.

This lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space. 3D Modeling with Blender: 01. Blender Basics Overview This lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space. Concepts Covered Blender s

More information

Vision Pointer Tools

Vision Pointer Tools Vision Pointer Tools Pointer Tools - Uses Pointer Tools can be used in a variety of ways: during a Vision Demo to annotate on the master station s screen during a Remote Control session to annotate on

More information

What is Publisher, anyway?

What is Publisher, anyway? What is Publisher, anyway? Microsoft Publisher designed for users who need to create and personalize publications such as marketing materials, business stationery, signage, newsletters and other items

More information

TRAINING SESSION Q2 2016

TRAINING SESSION Q2 2016 There are 8 main topics in this training session which focus on the Sketch tools in IRONCAD. Content Sketch... 2 3D Scene Background Settings... 3 Creating a new empty Sketch... 4 Foam with cut out for

More information

Kidspiration 3 Basics Website:

Kidspiration 3 Basics Website: Website: http://etc.usf.edu/te/ Kidspiration is the visual learning tool for K-5 learners from the makers of Inspiration. With Kidspiration, students can build graphic organizers such as webs, concept

More information

Customizing FlipCharts Promethean Module 2 (ActivInspire)

Customizing FlipCharts Promethean Module 2 (ActivInspire) Customizing FlipCharts Promethean Module 2 (ActivInspire) Section 1: Browsers The browsers (located on the left side of the flipchart) are menus for various functions. To view the browsers, click Main

More information

PowerPoint 2010: Basic Skills

PowerPoint 2010: Basic Skills PowerPoint 2010: Basic Skills Application Support and Training Office of Information Technology, West Virginia University OIT Help Desk (304) 293-4444, oithelp@mail.wvu.edu oit.wvu.edu/training/classmat/ppt/

More information

User Guide. Web Intelligence Rich Client. Business Objects 4.1

User Guide. Web Intelligence Rich Client. Business Objects 4.1 User Guide Web Intelligence Rich Client Business Objects 4.1 2 P a g e Web Intelligence 4.1 User Guide Web Intelligence 4.1 User Guide Contents Getting Started in Web Intelligence 4.1... 5 Log into EDDIE...

More information

Making Windows XP work for you

Making Windows XP work for you Making Windows XP work for you With each version of Windows that has been released over the past several years, Microsoft and other developers have been made aware of the issues surrounding accessibility

More information

ezimagex2 User s Guide Version 1.0

ezimagex2 User s Guide Version 1.0 ezimagex2 User s Guide Version 1.0 Copyright and Trademark Information The products described in this document are copyrighted works of AVEN, Inc. 2015 AVEN, Inc. 4595 Platt Rd Ann Arbor, MI 48108 All

More information

OnPoint s Guide to MimioStudio 9

OnPoint s Guide to MimioStudio 9 1 OnPoint s Guide to MimioStudio 9 Getting started with MimioStudio 9 Mimio Studio 9 Notebook Overview.... 2 MimioStudio 9 Notebook...... 3 MimioStudio 9 ActivityWizard.. 4 MimioStudio 9 Tools Overview......

More information

OpenForms360 Validation User Guide Notable Solutions Inc.

OpenForms360 Validation User Guide Notable Solutions Inc. OpenForms360 Validation User Guide 2011 Notable Solutions Inc. 1 T A B L E O F C O N T EN T S Introduction...5 What is OpenForms360 Validation?... 5 Using OpenForms360 Validation... 5 Features at a glance...

More information

Web Page Basics. FRSD Elementary Technology Workshop. February Presented by Lisa Stewart, Tammy Gianvito, and Diane Kaufmann

Web Page Basics. FRSD Elementary Technology Workshop. February Presented by Lisa Stewart, Tammy Gianvito, and Diane Kaufmann Web Page Basics FRSD Elementary Technology Workshop February 2014 Presented by Lisa Stewart, Tammy Gianvito, and Diane Kaufmann Please save this booklet for future reference. 2 P a g e Notes and Questions

More information

SAPPHIRE Viewer: The Collaboration Tool

SAPPHIRE Viewer: The Collaboration Tool SAPPHIRE Viewer: The Collaboration Tool MiTek SAPPHIRE Viewer is a scaled down version of SAPPHIRE Structure that allows users to open, view, comment on, and print Structure files. This free application

More information

Expression Design Lab Exercises

Expression Design Lab Exercises Expression Design Lab Exercises Creating Images with Expression Design 2 Beaches Around the World (Part 1: Beaches Around the World Series) Information in this document, including URL and other Internet

More information

SolidWorks 2½D Parts

SolidWorks 2½D Parts SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select

More information

Lesson 1: Creating T- Spline Forms. In Samples section of your Data Panel, browse to: Fusion 101 Training > 03 Sculpt > 03_Sculpting_Introduction.

Lesson 1: Creating T- Spline Forms. In Samples section of your Data Panel, browse to: Fusion 101 Training > 03 Sculpt > 03_Sculpting_Introduction. 3.1: Sculpting Sculpting in Fusion 360 allows for the intuitive freeform creation of organic solid bodies and surfaces by leveraging the T- Splines technology. In the Sculpt Workspace, you can rapidly

More information

Microsoft PowerPoint 2013 Beginning

Microsoft PowerPoint 2013 Beginning Microsoft PowerPoint 2013 Beginning PowerPoint Presentations on the Web... 2 Starting PowerPoint... 2 Opening a Presentation... 2 File Tab... 3 Quick Access Toolbar... 3 The Ribbon... 4 Keyboard Shortcuts...

More information

Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints

Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the

More information

Web Console Setup & User Guide. Version 7.1

Web Console Setup & User Guide. Version 7.1 Web Console Setup & User Guide Version 7.1 1 Contents Page Number Chapter 1 - Installation and Access 3 Server Setup Client Setup Windows Client Setup Mac Client Setup Linux Client Setup Interoperation

More information

Chapter 1. Working with the Windows 7 Desktop

Chapter 1. Working with the Windows 7 Desktop 1 Chapter 1 Working with the Windows 7 Desktop Introducing Windows 7 The Windows 7 operating system software runs the computer system overall. Windows 7 enables the system hardware to communicate with

More information

The Fundamentals. Document Basics

The Fundamentals. Document Basics 3 The Fundamentals Opening a Program... 3 Similarities in All Programs... 3 It's On Now What?...4 Making things easier to see.. 4 Adjusting Text Size.....4 My Computer. 4 Control Panel... 5 Accessibility

More information

Creating Interactive PDF Forms

Creating Interactive PDF Forms Creating Interactive PDF Forms Using Adobe Acrobat X Pro for the Mac University Information Technology Services Training, Outreach, Learning Technologies and Video Production Copyright 2012 KSU Department

More information

Creating T-Spline Forms

Creating T-Spline Forms 1 / 28 Goals 1. Create a T-Spline Primitive Form 2. Create a T-Spline Revolve Form 3. Create a T-Spline Sweep Form 4. Create a T-Spline Loft Form 2 / 28 Instructions Step 1: Go to the Sculpt workspace

More information

Autodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360

Autodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360 Overview Modeling techniques in Fusion 360 Modeling in Fusion 360 is quite a different experience from how you would model in conventional history-based CAD software. Some users have expressed that it

More information

StitchGraph User Guide V1.8

StitchGraph User Guide V1.8 StitchGraph User Guide V1.8 Thanks for buying StitchGraph: the easy way to create stitch layouts for hardanger and other complex embroidery stitch types. StitchGraph is intended to allow you to create

More information

In our experience Google Chrome is the browser that works best with this program.

In our experience Google Chrome is the browser that works best with this program. Getting started In our experience Google Chrome is the browser that works best with this program. Go to www.usanorth811.org and then click on Utility Operators. Once there click on Service Area Registration/Member

More information

In this lesson, you ll learn how to:

In this lesson, you ll learn how to: LESSON 5: ADVANCED DRAWING TECHNIQUES OBJECTIVES In this lesson, you ll learn how to: apply gradient fills modify graphics by smoothing, straightening, and optimizing understand the difference between

More information

On the Web sun.com/aboutsun/comm_invest STAROFFICE 8 DRAW

On the Web sun.com/aboutsun/comm_invest STAROFFICE 8 DRAW STAROFFICE 8 DRAW Graphics They say a picture is worth a thousand words. Pictures are often used along with our words for good reason. They help communicate our thoughts. They give extra information that

More information

Evoq 8 Content Managers Training Manual

Evoq 8 Content Managers Training Manual Evoq 8 Content Managers Training Manual Table of Contents Chapter 1: User Login... 2 User Login...2 User Login Screen...2 User Logout...2 Chapter 2: Navigating within Evoq 8...3 Editing Bar...3 Dashboard...4

More information

BASIC MICROSOFT POWERPOINT

BASIC MICROSOFT POWERPOINT BASIC MICROSOFT POWERPOINT PART ONE PHONE: 504-838-1144 IT Training Team Jefferson Parish Library EMAIL: jpltrain@jplibrary.net In this class you will learn to: Launch, close, and interact with Microsoft

More information

Remodeling Your Office A New Look for the SAS Add-In for Microsoft Office

Remodeling Your Office A New Look for the SAS Add-In for Microsoft Office Paper SAS1864-2018 Remodeling Your Office A New Look for the SAS Add-In for Microsoft Office ABSTRACT Tim Beese, SAS Institute Inc., Cary, NC Millions of people spend their weekdays in an office. Occasionally

More information

Script for Administering the Civics EOC Practice Test (epat)

Script for Administering the Civics EOC Practice Test (epat) Script for Administering the Civics EOC Practice Test (epat) This script should be used to administer the Civics EOC Practice Test (epat) to students who will take the Civics EOC Assessment using TestNav

More information

Intermediate/Advanced. Faculty Development Workshop FSE Faculty retreat April 18, 2012

Intermediate/Advanced. Faculty Development Workshop FSE Faculty retreat April 18, 2012 Intermediate/Advanced Faculty Development Workshop FSE Faculty retreat April 18, 2012 Remote Desktop Sharing Quick Reference Guide for Moderators The Moderator or a Participant may request control of another

More information

Primal s 3D Human Anatomy and Physiology on Anatomy.tv

Primal s 3D Human Anatomy and Physiology on Anatomy.tv USER GUIDE Primal s 3D Human Anatomy and Physiology on Anatomy.tv Welcome to our user guide to 3D Human Anatomy and Physiology on Anatomy.tv. Please read on, or select one of the links opposite to jump

More information

Designer Reference 1

Designer Reference 1 Designer Reference 1 Table of Contents USE OF THE DESIGNER...4 KEYBOARD SHORTCUTS...5 Shortcuts...5 Keyboard Hints...5 MENUS...7 File Menu...7 Edit Menu...8 Favorites Menu...9 Document Menu...10 Item Menu...12

More information

Introduction to MS Office Somy Kuriakose Principal Scientist, FRAD, CMFRI

Introduction to MS Office Somy Kuriakose Principal Scientist, FRAD, CMFRI Introduction to MS Office Somy Kuriakose Principal Scientist, FRAD, CMFRI Email: somycmfri@gmail.com 29 Word, Excel and Power Point Microsoft Office is a productivity suite which integrates office tools

More information

Libraries. Multi-Touch. Aero Peek. Sema Foundation 10 Classes 2 nd Exam Review ICT Department 5/22/ Lesson - 15

Libraries. Multi-Touch. Aero Peek. Sema Foundation 10 Classes 2 nd Exam Review ICT Department 5/22/ Lesson - 15 10 Classes 2 nd Exam Review Lesson - 15 Introduction Windows 7, previous version of the latest version (Windows 8.1) of Microsoft Windows, was produced for use on personal computers, including home and

More information

ORGANIZING YOUR ARTWORK WITH LAYERS

ORGANIZING YOUR ARTWORK WITH LAYERS 9 ORGANIZING YOUR ARTWORK WITH LAYERS Lesson overview In this lesson, you ll learn how to do the following: Work with the Layers panel. Create, rearrange, and lock layers and sublayers. Move objects between

More information

Mac: Beyond Basics. Window 2 (Microsoft Word) Window 1 (folder contents)

Mac: Beyond Basics. Window 2 (Microsoft Word) Window 1 (folder contents) Mac: Beyond Basics Working with windows When you open a file or application, you will see a window. This window is your working area. It is possible to have many windows open at the same time. This allows

More information

How to Create a Google Sites Website

How to Create a Google Sites Website How to Create a Google Sites Website * Google Sites must be built and maintained in either Google Chrome or Firefox. Google Sites is not supported by Internet Explorer. Let s get started! Go to google.com

More information

SMART Board Interactive Whiteboard Basics

SMART Board Interactive Whiteboard Basics SMART Board Interactive Whiteboard Basics This Quick Reference Guide provides an overview of the information you need to begin using a SMART Board interactive whiteboard. Before you begin, make sure the

More information

Getting Started Guide

Getting Started Guide UX-App Getting Started Guide Contents Keyboard Shortcuts... 2 Basic Shortcuts... 2 Component Manipulation... 2 Working with groups... 3 Grid Control... 3 Context Menu... 4 User Interface... 5 Managing

More information

What is an Operating System?

What is an Operating System? What is an Operating System? Hi! I m Sarah, and I m here to tell you about a computer s operating system and guide you through navigating a computer. We ll follow along with Jane. Jane wants to use the

More information

Primal s 3D Real-time on Anatomy.tv

Primal s 3D Real-time on Anatomy.tv USER GUIDE Primal s 3D Real-time on Anatomy.tv Welcome to our user guide to 3D Real-time on Anatomy.tv. Please read on, or select one of the links opposite to jump straight to a particular topic. Anatomy.tv

More information

SolidWorks Intro Part 1b

SolidWorks Intro Part 1b SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks

More information

SketchUp. SketchUp. Google SketchUp. Using SketchUp. The Tool Set

SketchUp. SketchUp. Google SketchUp. Using SketchUp. The Tool Set Google Google is a 3D Modelling program which specialises in making computer generated representations of real-world objects, especially architectural, mechanical and building components, such as windows,

More information

Premiere Pro Desktop Layout (NeaseTV 2015 Layout)

Premiere Pro Desktop Layout (NeaseTV 2015 Layout) Premiere Pro 2015 1. Contextually Sensitive Windows - Must be on the correct window in order to do some tasks 2. Contextually Sensitive Menus 3. 1 zillion ways to do something. No 2 people will do everything

More information

Photoshop tutorial: Final Product in Photoshop:

Photoshop tutorial: Final Product in Photoshop: Disclaimer: There are many, many ways to approach web design. This tutorial is neither the most cutting-edge nor most efficient. Instead, this tutorial is set-up to show you as many functions in Photoshop

More information

ALES Wordpress Editor documentation ALES Research websites

ALES Wordpress Editor documentation ALES Research websites ALES Wordpress Editor documentation ALES Research websites Contents Login... 2 Website Dashboard... 3 Editing menu order or structure... 4 Add a new page... 6 Move a page... 6 Select a page to edit...

More information

Moving to the Mac A GUIDE FOR NEW USERS OF MAC OS X. [Type here]

Moving to the Mac A GUIDE FOR NEW USERS OF MAC OS X. [Type here] [Type here] Moving to the Mac A GUIDE FOR NEW USERS OF MAC OS X This guide is aimed at those who are new to using Mac s. It assumes that you have prior knowledge of using a computer, probably a PC. The

More information

1. Adjusting Your Work Area

1. Adjusting Your Work Area 21 1. Adjusting Your Work Area You can customize the Windows Vista operating system to look and function exactly how you want. In the book Windows Vista for SENIORS you learned for example how to change

More information

COS 116 The Computational Universe Laboratory 10: Computer Graphics

COS 116 The Computational Universe Laboratory 10: Computer Graphics COS 116 The Computational Universe Laboratory 10: Computer Graphics As mentioned in lecture, computer graphics has four major parts: imaging, rendering, modeling, and animation. In this lab you will learn

More information

Full Screen Layout. Main Menu Property-specific Options. Object Tools ( t ) Outliner. Object Properties ( n ) Properties Buttons

Full Screen Layout. Main Menu Property-specific Options. Object Tools ( t ) Outliner. Object Properties ( n ) Properties Buttons Object Tools ( t ) Full Screen Layout Main Menu Property-specific Options Object Properties ( n ) Properties Buttons Outliner 1 Animation Controls The Create and Add Menus 2 The Coordinate and Viewing

More information

Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide

Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to

More information

Discover the Start screen.

Discover the Start screen. Discover the Start screen. Your Start screen has all of the information that matters most to you. Live tiles keep you up to date. Your favorite apps, such as Office apps, People, News, and more are front

More information

Ringtail Basics. Quick Start Guide

Ringtail Basics. Quick Start Guide Ringtail Basics Quick Start Guide Ringtail 8 brings a new level of simplicity, ease of use, and efficiency to document review. The following pages walk through scenarios, based on common tasks, to show

More information

Profile Modeler Profile Modeler ( A SuperControl Product )

Profile Modeler Profile Modeler ( A SuperControl Product ) Profile Modeler ( A SuperControl Product ) - 1 - Index Overview... 3 Terminology... 3 Launching the Application... 4 File Menu... 4 Loading a File:... 4 To Load Multiple Files:... 4 Clearing Loaded Files:...

More information

OneNote

OneNote OneNote https://login.microsoftonline.com Teacher Login: Username: email address Password: computer login password (Teachers and students have 5 copies of Office for laptops/desktops and 5 copies for tablets/smartphones.)

More information

HOW TO USE THE CONTENT MANAGEMENT SYSTEM (CMS) TABLE OF CONTENTS

HOW TO USE THE CONTENT MANAGEMENT SYSTEM (CMS) TABLE OF CONTENTS HOW TO USE THE CONTENT MANAGEMENT SYSTEM (CMS) TABLE OF CONTENTS GETTING STARTED (LOGIN) 2 SITE MAP (ORGANIZE WEBPAGES) 2 CREATE NEW PAGE 3 REMOVE PAGE 6 SORT PAGES IN CHANNEL 7 MOVE PAGE 8 PAGE PROPERTIES

More information

Week 1 The Blender Interface and Basic Shapes

Week 1 The Blender Interface and Basic Shapes Week 1 The Blender Interface and Basic Shapes Blender Blender is an open-source 3d software that we will use for this class to create our 3d game. Blender is as powerful as 3d Studio Max and Maya and has

More information

A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)

A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.

More information

VIMED JWEB Manual. Victorian Stroke Telemedicine. Version: 1.0. Created by: Grant Stephens. Page 1 of 17

VIMED JWEB Manual. Victorian Stroke Telemedicine. Version: 1.0. Created by: Grant Stephens. Page 1 of 17 VIMED JWEB Manual Victorian Stroke Telemedicine Version: 1.0 Created by: Grant Stephens Page 1 of 17 1 Table of Contents 1 Table of Contents... 2 2 What is JWEB?... 4 3 Accessing JWEB... 4 3.1 For Mac

More information

My Site. Introduction

My Site. Introduction My Site Introduction My Site is a component of the portal that is available to all NB educators. It is a personalized site that provides all users with the following features: A place to save and share

More information

POWERPOINT BASICS: MICROSOFT OFFICE 2010

POWERPOINT BASICS: MICROSOFT OFFICE 2010 POWERPOINT BASICS: MICROSOFT OFFICE 2010 GETTING STARTED PAGE 02 Prerequisites What You Will Learn USING MICROSOFT POWERPOINT PAGE 03 Microsoft PowerPoint Components SIMPLE TASKS IN MICROSOFT POWERPOINT

More information

ClassHub for Teachers. A User Guide for the Classroom

ClassHub for Teachers. A User Guide for the Classroom ClassHub for Teachers A User Guide for the Classroom Table of Contents CLASSHUB TEACHER... My Class Settings... Class List... Using Views and Screen Peek... Actions... MIRRORING... Mirroring Actions...

More information

Computer Basics: Step-by-Step Guide (Session 2)

Computer Basics: Step-by-Step Guide (Session 2) Table of Contents Computer Basics: Step-by-Step Guide (Session 2) ABOUT PROGRAMS AND OPERATING SYSTEMS... 2 THE WINDOWS 7 DESKTOP... 3 TWO WAYS TO OPEN A PROGRAM... 4 DESKTOP ICON... 4 START MENU... 5

More information

Colony Counting User Manual A D I V I S I O N O F S Y N O P T I C S L T D

Colony Counting User Manual A D I V I S I O N O F S Y N O P T I C S L T D ProtoCOL Colony Counting User Manual S Y N B I O S I S A D I V I S I O N O F S Y N O P T I C S L T D All possible care has been taken in the preparation of this publication, but Synoptics Limited accepts

More information

Windows 10 Quick Tips

Windows 10 Quick Tips Windows 10 Quick Tips Contents Drag to Fit Windows... 2 Quickly Jump Between Virtual Desktops... 2 Move open windows between virtual desktops... 2 Rotate Your Screen via Keyboard Ctrl-Alt-D Arrows... 3

More information

Mouse Navigation. Middle Button (wheel) Pan. Click + Drag. Re-Center View. Double-Click. Context Menu. Tool Operation. Click. Click. Multi-Select.

Mouse Navigation. Middle Button (wheel) Pan. Click + Drag. Re-Center View. Double-Click. Context Menu. Tool Operation. Click. Click. Multi-Select. BLUEBEAM REVU KEYBOARD SHORTCUTS Mouse Navigation Middle Button (wheel) Pan Re-Center View Click + Drag Double-Click Left Button Right Button Tool Operation Click Context Menu Click Pan Click + Spacebar

More information

This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality.

This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality. This guide will help you with many of the basics of operation for your Epson 485wi BrightLink Projector with interactive functionality. If you need further assistance with questions, you can refer to the

More information

A Study of Angles & Curves

A Study of Angles & Curves A Study of Angles & Curves Method 1: Cutting Quilt Shapes/Using the Shapes Tools Open BERNINA CutWork Software. Make sure that Create New is selected. Click Next. Place a dot in front of New Graphic. Select

More information

Systems Space Reservation

Systems Space Reservation Systems Space Reservation Preface Using This Guide What's New? Getting Started Enter the Workbench Create an Equipment Reservation Set Correct Working Units and Grid Changing the Current Axis Saving Documents

More information

Drawing Tools. Drawing a Rectangle

Drawing Tools. Drawing a Rectangle Chapter Microsoft Word provides extensive DRAWING TOOLS that allow you to enhance the appearance of your documents. You can use these tools to assist in the creation of detailed publications, newsletters,

More information

Lesson 1 Parametric Modeling Fundamentals

Lesson 1 Parametric Modeling Fundamentals 1-1 Lesson 1 Parametric Modeling Fundamentals Create Simple Parametric Models. Understand the Basic Parametric Modeling Process. Create and Profile Rough Sketches. Understand the "Shape before size" approach.

More information

Let s Make a Front Panel using FrontCAD

Let s Make a Front Panel using FrontCAD Let s Make a Front Panel using FrontCAD By Jim Patchell FrontCad is meant to be a simple, easy to use CAD program for creating front panel designs and artwork. It is a free, open source program, with the

More information

Keynote 08 Basics Website:

Keynote 08 Basics Website: Website: http://etc.usf.edu/te/ Keynote is Apple's presentation application. Keynote is installed as part of the iwork suite, which also includes the word processing program Pages and the spreadsheet program

More information

Copyright 2018 MakeUseOf. All Rights Reserved.

Copyright 2018 MakeUseOf. All Rights Reserved. 15 Power User Tips for Tabs in Firefox 57 Quantum Written by Lori Kaufman Published March 2018. Read the original article here: https://www.makeuseof.com/tag/firefox-tabs-tips/ This ebook is the intellectual

More information

StickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC

StickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...

More information

Autodesk Fusion 360: Render. Overview

Autodesk Fusion 360: Render. Overview Overview Rendering is the process of generating an image by combining geometry, camera, texture, lighting and shading (also called materials) information using a computer program. Before an image can be

More information

mecn_apn_access_2014_v2.docx 1/13/2014 9:14:45 AM Page 1 of 29

mecn_apn_access_2014_v2.docx 1/13/2014 9:14:45 AM Page 1 of 29 Double Login... 2 From a Microsoft Windows Operating System... 2 Terminal Server... 6 Shibboleth Login... 7 Assignment List Screen... 8 LOR s... 8 SAO Upload... 8 Correct LOR Examples... 9 Incorrect LOR

More information

NETWORK THE HOME 10 FOLDERS APPS

NETWORK THE HOME 10 FOLDERS APPS NID-7006 NAXA NID Tablet User s Guide Table of Contents GETTING STARTED 4 CONNECTING TO A WIRELESS NETWORK 4 USING THE TOUCHSCREEN 4 USING THE HOME SCREENS 5 USING THE NAVIGATION ICONS 6 USING THE ALL

More information