Rear-Engine Riders Parts Manual

Transcription

1 Rear-Engine Riders Parts Manual Models 06 - RM0 0 - RM0 0 - RM RM 06 - RM RM0 0 - RM 0 - RM 0 - RM0 0600B /0 Supercedes 0600,A Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.06 /6.6 /6. /.6 /. /6.6 /6.0 /.0 /. /6. /6. /. /. /6. /6.00 /.00 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit.. Know the part number required.. Know the quantity required.. Know the part description. Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.

3 Contents Models Decals Frame and Seat Steering Speed Selector Brake and Clutch Engine and Belts Rear Axle Solenoid Gear Case Electrical Mower Height Linkage Mower Engagement Linkage Mower Pan Mower Spindle Model 06 (RM0e) HP Briggs & Stratton w/ Mower Serial No and up Model 0 (RM0) -.0 HP Briggs & Stratton w/ Mower Serial No and up Model 0 (RM00) -.0 HP Briggs & Stratton w/0 Mower Serial No and up Model 0 (RM) -.0 HP Briggs & Stratton w/ Mower Serial No and up Model 06 (RM0) -.0 HP Briggs & Stratton w/0 Mower Serial No and up Model 06 (RM0) -.0 HP Briggs & Stratton w/ Mower Serial No and up Model 0 (RM) -.0 HP Briggs & Stratton w/ Mower Serial No and up Model 0 (RM) -.0 HP Briggs & Stratton w/ Mower Serial No and up Reference Table Model 0 (RM0) HP Briggs & Stratton w/ Mower Serial No and up Hardware descriptions are given in decimals. Decimals to Fractions.06 /6.6 /6. /.6 /. /6.6 /6.0 /.0 /. /6. /6. /. /. /6. /6.00 /.00, 00 Ariens Company - All Rights Reserved

4 Decals Models 06,0,0,0,06,06,0,0,0 6 N R Speed Selector In Mower Clutch Out Located on right hand side of driver's seat High Mower Height Low WIDTH OF CUT PA00 DANGER/DANGER/PELIGRO FLEX-N-FLOAT 0A 000 Decal Set - RM Dash (0, 0, 06, 0) 0000 Decal Set - RM Dash (06, 0, 06, 0, 0) 000 Mower Clutch Decal 000 Decal - Speed Selector 000 Mower Height Decal 6600 Decal Set - Mower Deck

5 00 Decals Models 06,0,0,0,06,06,0,0,0 Cast Iron Bore 06 CAUTION Before starting engine be sure machine is in neutral and mower clutch is disengaged. 0 (0,06) (0) (0) (0, 0) (06) (06,0) PA00 MULCH MOW BAG VAC Decal - Cast Iron Bore (0,0,06,0,0) 000 Caution Decal - Eng. Starting 000 Decal - 0 (0, 06) 000 Decal Set - RM Dash (0, 0) 0000 Decal Set - RM Dash (06,0,06,0,0) Decal - Mulch-Mow-Bag-Vac (0,0,06,0,0) 000 Operating Instructions Decal (0,0,0,06)

6 Frame and Seat Models 06,0,0,0,06,06,0,0, PA00

7 Frame and Seat Models 06,0,0,0,06,06,0,0, Seat V-00 (0,06,0,0) 000 Seat V-00 (06,0,0,06,0) 000 Seat Bracket 000 Baffle (06,0) Nut-Hex Pin-Hair Internal.0 x. x Washer-Locking-External.00x.0x Nut-Locking-Center Washer-Lock Internal. x Seat Leg Assembly Washer-Flat-Steel. x. x Washer-Lock. x Bolt-Hex.- x. Grade 0600 Washer-Flat-Steel. x. x Muffler Guard (0,0) 0600 Screw (0,0) Battery Strap 0000 Standup Tube 000 Bolt-Hex.- x.0 Gr. 000 Service Bar Brace Screw-Tapping.- x Back Cover 000 Bolt-Hex.-0 x.0 Gr. 000 Bolt-Hex.-0x.0 Gr. (06,0) 0600 Bolt-Round Head Square Neck.- x Brace 0600 Nut-Locking-Center Nut-Locking-Center.-0 (06,0) Screw-Machine 0- x Bolt-Hex.- x Screw-Tapping.-0 x Spacer Bushing Frame with Decals Key Set 000 Cap-Ignition Switch 0600 Nut-Panel Washer-Lock Internal.6 x Seat Pivot Bracket Knob Screw-Tapping 0- x Screw-Tapping 0- x Plastic Grommet Throttle Control 000 Dash Panel - RM 0000 Rubber Pad 000 Battery Tray Hook Cowl Grille Insert & Shell Assembly 0600 Left Hand Fender Brace Washer-Flat-Steel. x.6 x Bolt-Round Head Square Neck.- x Right Hand Fender Brace 0000 Frame Brace Nut-Locking-Flange Bolt-Round Head Square Neck.- x Screw-Tapping.- x Frame Brace Nut-Retainer.-0

8 6 Steering Models 06,0,0,0,06,06,0,0, PA0

9 Steering Models 06,0,0,0,06,06,0,0,0 000 Steering Wheel Inch 0000 Pin-Roll.0 x. 000 Steering Shaft 0000 Plug 000 Tube Screw-Tapping.- x Brace 000 Flange Bushing 0000 Steering Support Pin-Roll. x Bolt-Round Head Square Neck.-6 x Bushing-Flange.6 x.6 x Steering Bracket Spacer.0 x.0 x Washer-Flat-Steel.60 x.0 x Washer-Flat-Steel.0 x.00 x Nut-Locking-Jam Washer-Hardened-Steel-Thr. x. x Screw-Tapping 0- x Retaining Plate 000 Screw-Tapping 0-x Nut-Locking-Nylon Steering Gear 0000 Pinion Bolt-Serrated Round Head Slotted.- x Washer-Lock. x Nut-Locking-Flange Nut-Locking-Center Axle Bracket Tire/Wheel Assembly Tire.0/ Bushing-Flange.0 x.0 x.0 x. 000 Wheel-Compression 000 Spindle Cup 0000 Hub Cap Pin-Cotter. x Bushing-Sleeve.00 x.0 x Pin-Cotter.0 x Washer-Flat-Steel.0 x.0 x Washer-Flat-Steel. x. x Bolt-Hex.0- x.00 Gr Pin-Groove.0 x Spindle Washer 000 R.H. Wheel Spindle 000 L.H. Wheel Spindle Arm Hanger Pin Washer-Flat-Steel.0 x. x Bushing-Flange.00 x.6 x. x Pin-Cotter. x. 000 Axle Tie Rod 000 Ball Joint Nut-Jam Steering Link Washer-Flat-Steel.06 x. x.06

10 Speed Selector Models 06,0,0,0,06,06,0,0, PA0

11 Speed Selector Models 06,0,0,0,06,06,0,0,0 000 Bolt-Hex.- x Knob,. Dia Shift Lever 000 Shoulder Bolt 0600 Nut-Hex Bushing-Flange. x.00 x. x Bell Crank 0600 Washer-Flat-Steel. x.06 x Washer-Flat-Steel. x.66 x Spring-Tension. x 6 x Pin-Cotter.0 x Bolt-Hex.- x. Grade 0600 Washer-Flat-Steel. x. x Spacer Bushing. x. x Nut-Locking-Center Shift Rod 0600 Nut-Jam Ball Joint-Snap In 000 Flange Bushing Bushing-Sleeve.6 x.0 x Bearing Ball.6 x. x Shift Link Nut-Locking-Center Washer-Hardened-Steel-Thr. x. x Bearing Housing Carrier Assembly Pin-Cotter. x Transfer Shaft 0000 Carrier Yoke Screw Tapping.- x Neutral Stop 000 Screw-Tapping.- x. 000 Bushing-Sleeve.6 x.000 x Bearing-Ball.0 x. x Screw-Tapping.0-0 x Washer-Hardened-Thrust. x. x Disc Adapter 000 Spindle Bolt 000 Disc 000 Drive Carrier Assembly Flange Bushing 0000 Shift Arm Nut-Locking-Center Indicator Rod 00 Ring-Retaining-Extention.6 x Screw-Tapping.-0 x Pin-Cotter.06 x Nut-Locking-Center Clip 000 Bracket-Neutral Washer-Flat-Steel. x.6 x Spacer Bushing Quadrant 0600 Bolt-Round Head Square Neck.- x Indicator 000 Bolt-Hex.-0 x.0 Gr. 6

12 Brake and Clutch Models 06,0,0,0,06,06,0,0, PA0 0

13 Brake and Clutch Models 06,0,0,0,06,06,0,0, Clutch, Shaft 0000 Flange Bushing Pin-Cotter. x Nut-Locking-Center Brake Band Washer-Flat-Steel.0 x.0 x Clutch Bracket 0600 Nut-Hex Pin-Cotter.0 x Washer-Flat-Steel. x.6 x Brake Lever Pin-Cotter. x Clevis Pin.6/. x -/ Washer-Lock Internal. x Spring-Compression.0 x. x Brake Bracket 0000 Brake Rod 000 Spring-Tension.0 x.60 x Clutch Rod Bolt-Serrated Round Head Slotted.- x Washer-Flat-Steel. x. x Spacer Bushing 000 Spring-Torsion. x.0 x Bolt-Hex.- x. Gr. 000 Brake Latch Washer-Flat-Steel. x. x Bolt-Hex.- x.00 Gr Clutch Pedal Arm 000 Clutch Arm Clevis Pin./.6 x Pin-Cotter.06 x Brake Arm 0600 Nut-Hex Screw-Machine - x Spacer Shoulder. x.00 x.6 x Nut-Locking-Jam Brake Pedal Arm Pedal 0600 Bolt-Round Head Square Neck.-6 x.

14 Engine and Belts Models 06,0,0,0,06,06,0,0, PA00

15 Engine and Belts Models 06,0,0,0,06,06,0,0, Engine -.0 HP B & S I/C (0,0,06) 000 Engine - HP B & S I/C (0,06,0,0) Engine - 0 HP B & S non I/C (06,0) 000 Pre-Guard-Rewind (06,0, 0,0) 0600 Nut-Locking-Center Nipple Pipe Cap Bolt-Hex.- x.0 Gr Washer-Flat-Steel. x. x Key-Straight. x.0 x Engine Sheave V-Belt L-Section -/ x /6 000 Guard (06,0) 000 Screw-Tapping 0- x. (06,0) Washer-Flat-Steel.0 x.0 x Washer-Lock. x Bolt-Hex.-0 x. Gr V-Belt HA 6.6 x.6 (06,0,0,06,06,0,0) 000 V-Belt L-Section 6-/ x / (0,0) Nut-Locking-Center Shoulder Stud Idler Arm Bolt-Round Head Square Neck.- x Wave Washer Washer-Flat-Steel.0 x. x Pin-Cotter.0 x Idler-Flat. x Bolt-Hex.- x. Gr Spring-Tension.06 x. x Belt Finger Brace Nut-Flange Belt Finger

16 Rear Axle Models 06,0,0,0,06,06,0,0, PA Hub Cap 0600 Spindle Cap 000 Bushing-Sleave.60 x. x L.H. Axle Assembly Fitting-Lube.- x Washer-Lock.0 x Screw-Tapping.-0 x Seal. x.6 x. 000 Screw-Tapping.- x Bearing Flange Nut-Locking-Flange Washer-Flat-Steel.0 x.0 x Pin-Cotter. x Right Hand Axle Pin-Roll. x Bearing Ball. x.0 x Bearing Flange 0600 Gear Case Assembly (See Next page for detail) 000 Tire/Wheel Assembly #-6 x Tire x Wheel Indus: # Screw-Tapping.00-0 x Spindle Cup Pushnut

17 Solenoid Models 06,0,06,0,0 Models 0,0,06, Nut-Jam Washer-Lock-External.6 x.0 x Nut Washer-Lock-External.00 x.0 x Nut-Locking-Nylon Bolt-Round Head Square Neck.-0 x Solenoid Nut-Locking-Nylon Washer-Lock External.6 x.0 x Solenoid Bolt-Round Head Square Neck.-0 x Washer-Lock External.00 x.0 x Nut Nut-Jam.-

18 Gear Case Models 06,0,0,0,06,06,0,0, PA Friction Disc Hub Friction Disc Guard Washer-Lock Internal.6 x Nut-Locking Nylon Bolt-Hex.- x.0 Gr Washer-Lock Internal. x Bushing Sleeve. x. x Differential Assembly Key-Woodruff. x. x Seal. x. x Washer-Flat-Steel.6 x.0 x Service Gear Case 0000 Bearing-Ball.6 x. x. 000 Pinion Shaft Pin-Roll. x Idler Shaft Washer-Flat-Steel.0 x. x Bearing-Needle.0 x.6 x Spacer-Cut.60 x.6 x Pinion & Gear w/ Bearing Assembly 000 Gasket 0000 Gear Case Cover Assembly 000 Screw-Tapping 0- x Breather Bearing-Ball. x.0 x Grease Sten Mix 6

19 Electrical Models 06,0,0,0,06,06,0,0,0 Yellow Regulator Red + Alternator Engine Electronic Ignition Start Red Black 6 Green Black Brown Red Pink G S B Yellow Yellow Pink M Yellow Red Red Red Yellow Blue Neutral Brown 0, Clutch White Black Green Seat Plug PA Regulator 000 Starter Cable (06,0, 06,0,0) 000 Starter Cable 6 (0,0, 06,0) 000 Battery 000 Ground Cable 000 Starter Cable Solenoid 0600 Wire Harness RM B & S Engines 000 Switch Assembly 000 Switch-Snap Mounting N.O Module,Interlock, Recoil 000 Adapter - Seat Switch 0600 Switch Seat 000 Harness Adapter

20 Mower Height Linkage Models 06,0,0,0,06,06,0,0, PA0

21 Mower Height Linkage Models 06,0,0,0,06,06,0,0, Screw-Socket Head.- x Washer-Flat-Steel. x. x Spacer Bushing. x. x Nut-Locking-Jam Rod Pivot Link-Rear Lift 0600 Nut-Locking-Center Rod-Rear Lift Pin-Cotter.0 x Flange Bushing 0600 Rear Mower Hanger 000 Bolt-Hex.-6 x.0 Gr Bolt-Round Head Square Neck.-6 x. 000 Positioning Arm (0,0) 000 Adjustment Strap Nut-Locking-Center Washer-Lock. x. 000 Bolt-Hex.-6 x. Gr. 000 Lift Strap Spacer-Shoulder. x.00 x.6 x Bolt-Hex.- x. Gr Spacer Bushing Washer-Flat-Steel. x.6 x Pin-Roll. x Bolt-Hex.- x. Gr Mower Lift Arm 0000 Strap Pin-Cotter.0 x. 000 Link-Front Lift Nut-Cuplg Right Hand & Left Hand Thread Link-Front Lift 0600 Washer-Flat-Steel.0 x. x Knob,. Dia Screw-Tapping - x.0 0 Mower Height Lever Screw-Tapping.- x Screw-Tapping.0-0 x. 000 Reinforcement Stop 0600 Pin-Cotter. x Shoulder Bolt 000 Quadrant Pin-Hair Internal.0 x. x Hanger Pin 000 Front Lift Arm (06,0,0,06,06,0,0) 000 Front Lift Arm (0,0)

22 0 Mower Engagement Linkage Models 06,0,0,0,06,06,0,0, PA00

23 Mower Engagement Linkage Models 06,0,0,0,06,06,0,0, Nut-Locking-Center Washer-Flat-Steel. x.6 x Wave Washer (0,0) Spacer Bushing. x. x Nut-Locking-Center Rod Pivot (0,0) 0600 Washer-Flat-Steel. x. x Spring-Compression. x.6 x 6. (0,0) 000 Clutch Rod (0,0) Arm (0,0) 0600 Washer-Flat-Steel. x. x Washer-Flat-Steel. x.6 x.06 (,0) 000 Screw-Tapping.- x Bolt-Hex.- x Deck Pivot Bracket (0,0) Spacer Bushing Spring-Tension.0 x. x Pin-Cotter. x Pin-Cotter.0 x Clutch Rod Right Hand (0,0) 0600 Nut-Jam Nut-Cuplg Right Hand & Left Hand Thread.-6 (0,0) Nut Left Hand Thread Gr..-6 (0,0) 000 Clutch Rod Left Hand (0,0) 0600 Nut.0- (0,0) Washer-Lock.00 x. (0,0) 000 Front Anchor (0,0) 0000 Bolt-Hex.- x. Gr Mower Adjustment Bracket Cap Screw (06,0,0,06, 06,0,0) 000 Bolt-Hex.0- x. (0,0) 000 Clutch Rod Service Assembly (0,0) 0000 Spring-Tension. x 6 x. 000 Shoulder Bolt 000 Shaft 000 Knob,. Dia Mower Clutch Lever 0000 Clutch Arm 000 Flange Bushing Link Clutch Link (06,0,0,06,06,0,0) 0600 Clutch Link (0,0) 0000 Screw-Tapping.-0 x Pin-Roll. x Adjustment Yoke (06,0,0,06,06,0,0) 0600 Washer-Flat-Steel.0 x.000 x Lock Spring (06,0,0,06,06,0,0) Screw-Tapping 0- x Blade Brake 0600 Washer. x.0 x Brake Bracket (06,0,0,06,06,0,0) Pivot Bracket (0,06) 0000 Mower Engagement Link (06,0,0,06,06,0,0) 0000 Brake Clip (0,06) Rivet. x.0 (06,0,0,06,06,0,0) 0000 Mower Brake Lever (06,0,0,06,06,0,0) 0000 Clevis Pin.06/. x -/ (06,0,0,06,06,0,0) Mower Engaging Arm (06,0,0,06,06,0,0) 0000 Mower Brake Link (06,0,0,06,06,0,0) 000 Mower Brake Link Service Assembly (06,0,0,06,06,0,0) Pin-Hair Internal.0 x. x.

24 Mower Pan Models 06,0,0,0,06,06,0,0, PA00

25 Mower Pan Models 06,0,0,0,06,06,0,0, Nut-Locking-Center Hinge Plate 0000 Bushing (0,06) 0600 Nut-Nylon-LockingWing Washer-Flat-Steel. x. x Spring-Tension.0 x.0 x.0 (0,06) 000 Spring-Tension.00 x. x.6 (06,0,06,0,0) 000 Spring-Tension.00 x. x.6 (0,0) Ring-Retaining-External. x Pin 0000 Rear Mounting Bracket (0,06) Screw-Tapping.- x.0 (,6) 0000 Clevis Pin / x Pin-Hair Internal.0 x. x Swivel Bracket 0000 Pan Head Chute Extension (0,06) 0000 Deflector with Decals (06,0,06,0,0) 000 Deflector with Decals (0,0) 0600 Bolt Round Head Square Neck.-0 x. Gr Bolt Round Head Square Neck.-0 x Mower Pan Head with Deflector & Decals (06,0,06,0,0) 000 Mower Pan Head Service Assembly (06,0,06, 0,0) Mower Pan Head with Deflector & Decals (0,06) Mower Pan Head Assembly (0,06) 0600 Mower Pan Head with Deflector & Decals (0,0) 000 Mower Pan Head Assembly Retrofit (0,0) 0600 Bolt-Round Head Square Neck.- x Nut-Locking-Center Nut-Flange Pin-Hair.0 x. x. 000 Clevis Pin.6 x. x Bushing-Flange. x.00 x. x Roller Clevis (06,0,0 06,0,0,0) 000 Roller (06,0,0,06, 0,0,0) Screw-Tapping.-6 x Bolt-Hex.-6 x. Gr Nut-Hex-Jam Nut-Locking-Center Bolt-Hex.-6 x.00 Gr Adjusting Arm 0600 Front Bracket 0 (0,06)

26 Mower Spindle Models 06,0,0,0,06,06,0,0, PA00

27 Mower Spindle Models 06,0,0,0,06,06,0,0, Nut-Center-Locking-Jam Washer-Lock.0 x Mower Sheave (0,06) 0000 Mower Sheave (06,0, 06,0,0) 000 Mower Sheave (0,0) Mower Belt Finger (06,0,0,06,0) 000 Belt-Finger (0,0) Nut-Flange Fastener (0,0) 0000 Brake Band (0,0) 0000 Spring-Compression.0 x.6 x Washer-Flat-Steel. x.6 x Nut-Hex Washer-Flat-Steel.60 x.00 x Nut-Locking-Center Nut-Hex Washer-Lock. x Washer-Flat-Steel.0 x.0 x Idler.06 x. (0,0) 0600 Washer-Flat-Steel. x. x Idler (0,0) 000 Bearing Spacer (0,0) Belt Finger (0,0) Nut-Locking-Center Bolt-Hex.- x.0 Gr. 000 Bolt-Hex.-6 x. Gr Washer-Flat-Steel.06 x. x Washer-Flat-Steel.06 x.000 x Idler Arm (0,0) Washer-Flat-Steel. x. x Pin (0,0) 0000 Pin Roll. x.6 (0,0) 0600 Plate (0,06) Bearing Ball.0 x. x Spindle Housing (06,0,0,06,0,0,0) 0000 Spindle Housing (0,06) 000 Bolt-Hex.-6 x.00 Gr Spindle Shaft (0,06) 0600 Spindle Shaft (06,0, 0,06,0,0,0) Key Woodruff. x Bolt-Hex.- x. Gr Nut-Jam Bearing Slinger Retainer Hub (0,06) 0600 Hub (06,0,0,06, 0,0,0) Blade Tray (0,06) 000 Blade Tray Weldment (06, 0,0,06,0,0,0) Mower Blade (06,0,06,0,0) 000 Mower Blade 0 Inches (0,06) 0000 Blade (0,0) 000 Bolt-Hex.-6 x.00 Gr Washer-Flat-Steel.0 x.0 x Washer-Lock. x Bolt-Hex.-0 x. Gr.

28 GRAVELY A Division of Ariens Company 6 West Ryan Street P.O. Box Brillion, WI Fax