Upgrading software. Router software overview. Software upgrade configuration task list

Size: px
Start display at page:

Download "Upgrading software. Router software overview. Software upgrade configuration task list"

Transcription

1 Contents Upgrading software 1 Router software overview 1 Software upgrade configuration task list 1 Upgrading system software from BootWare menu 2 BootWare main menu 2 BootWare submenus 3 Using TFTP/FTP through Ethernet port 4 Using Xmodem through console port 5 Upgrading the BootWare program at the CLI 10 Upgrading the system boot file at the CLI 10 Specifying a boot file to be used at the next boot 10 Upgrading the boot file for the standby MPU 11 Upgrading software through hotfix 11 Basic concepts in hotfix 11 Patch state 12 Hotfix configuration task list 15 Configuration prerequisites 15 Installing a patch in one step 16 Installing a patch step-by-step 17 Uninstalling all patches in one step 19 Uninstalling a patch step-by-step 19 Upgrading clock card 20 Upgrading card logic 20 Displaying and maintaining software upgrade configuration 20 Software upgrade configuration examples 21 Remote upgrade configuration example 21 Hotfix configuration example 22 i

2 Upgrading software Router software overview The router software comprises the BootWare program and the system boot file. After the router is powered on, it runs the BootWare program, checks the memory size, tests the memory functionality, initializes hardware, and displays the hardware information. Then the router runs the boot file. The boot file provides drivers and adaption for hardware, and implements service features, like forwarding, VLAN, and SNMP. The BootWare program and system boot file are required to start up and run the router. Figure 1 illustrates their relationship. Figure 1 Relationship between the BootWare program and the system boot file You can upgrade both the BootWare program and system boot file using the BootWare menu or at the command-line interface (CLI). The following sections cover how to upgrade software at the CLI. For more information about how to upgrade software using the BootWare menu, see the H3C SR G Core Routers Installation Guide. Software upgrade configuration task list Task Upgrading system software from BootWare menu Upgrading the BootWare program at the CLI Upgrading the system boot file at the CLI Remarks Optional Optional Optional 1

3 Task Upgrading software through hotfix Upgrading clock card Upgrading card logic Remarks Optional Optional Optional Upgrading system software from BootWare menu You can upgrade the system software from the BootWare menu by using one of the following methods: Using TFTP/FTP through Ethernet port Using Xmodem through console port BootWare main menu Upon startup, the router displays the following information: SDRAM init successful. System is starting... **************************************************************************** * * * H3C SR8800 BootWare, Version 203 * * * **************************************************************************** Copyright (c) Hangzhou H3C Technologies Co., Ltd. Compiled Date : Jan CPU Type : MPC7447A CPU L1 Cache : 32KB CPU L2 Cache : 512KB CPU Clock Speed : 998MHz Memory Type : SDRAM Memory Size : 2048MB Memory Speed : 133MHz BootWare Size : 1MB Flash Size : 128MB cfa0 Size : 1024MB NVRAM Size : 512KB CPLD Version : 004 PCB Version : Ver.B Board self testing... Board steady testing... [ PASS ] Board SlotNo... [ 0 ] CPLD1 testing... [ PASS ] CPLD2 testing... [ PASS ] 2

4 The switch's Mac address... BootWare Validating... Press Ctrl+B to enter extended boot menu... [00:0F:E2:DE:86:00] NOTE: The output varies with router models. Press Ctrl+B when "Press Ctrl+B to enter extended BootWare menu..." appears. Please input BootWare password: Input the correct password to enter the BootWare main menu. (By default, no password is set, and press Enter to enter the menu. When a password is set, if you fail to input the correct password three times, the system hangs up, and you have to reboot the router.) Note: The current operating device is cfa0 Enter < Storage Device Operation > to select device. ===========================<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Modify BootWare Password <6> BootWare Operation Menu <7> Storage Device Operation <0> Reboot ============================================================================ Enter your choice(0-7): BootWare submenus Accessing the serial submenu You can upgrade the system software and modify serial port parameters from the serial submenu. Enter 2 in the BootWare main menu to access the serial submenu. ===========================<Enter Serial SubMenu>=========================== Note:the operating device is cfa0 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Serial Interface Parameter <0> Exit To Main Menu ============================================================================ Enter your choice(0-5): Accessing the Ethernet submenu Enter 3 in the BootWare main menu to access the Ethernet submenu. ==========================<Enter Ethernet SubMenu>========================== Note:the operating device is cfa0 3

5 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Ethernet Parameter <0> Exit To Main Menu <Ensure The Parameter Be Modified Before Downloading!> ============================================================================ Enter your choice(0-5): Accessing the file control submenu Enter 4 in the BootWare main menu to access the file control submenu, where you can display files, modify file names, and delete files. ===============================<File CONTROL>=============================== Note:the operating device is cfa0 <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ============================================================================ Enter your choice(0-3): Table 1 File control submenu description Item Description <1> Display All File(s) Display all files. <2> Set Application File type Set system software image type. Attributes main (M) and backup (B) determine the image type, such as type M, type B, or type M+B. An image can have any combination of M and B attributes, but there can only be one image for the same attribute. For example, if you specify an attribute for a new image, the original image with the specified attribute removes that attribute. If the original image has only one attribute, its type changes to N/A. <3> Delete File Delete files. <0> Exit To Main Menu Return to the BootWare main menu. Using TFTP/FTP through Ethernet port 1. Enter 3 in the BootWare main menu to access the Ethernet submenu, and then enter 6 to access the Ethernet parameter set menu. ==========================<ETHERNET PARAMETER SET>========================== Note: '.' = Clear field. '-' = Go to previous field. Ctrl+D = Quit. ============================================================================ Protocol (FTP or TFTP) :ftp 4

6 Load File Name : :main.bin Target File Name : :main.bin Server IP Address : Local IP Address : Gateway IP Address : FTP User Name :user FTP User Password :password Table 2 Parameter description Field Load File Name Target File Name Description Name for the downloaded file. Name of the target file, identical with the name of the file on the server. 2. Enter 2 to upgrade the main system software image. Loading Done! bytes downloaded! Updating File cfa0:/main.bin done! ==========================<Enter Ethernet SubMenu>========================== Note:the operating device is cfa0 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Ethernet Parameter <0> Exit To Main Menu <Ensure The Parameter Be Modified Before Downloading!> ============================================================================ Enter your choice(0-5): 3. Enter 0 to return to the BootWare main menu, and then enter 1 to boot the system. Using Xmodem through console port 1. Enter 2 in the BootWare main menu to access the serial submenu. ===========================<Enter Serial SubMenu>=========================== 5

7 Note:the operating device is cfa0 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Serial Interface Parameter <0> Exit To Main Menu ============================================================================ Enter your choice(0-5): 2. Enter 5 in the serial submenu to change the baud rate. ===============================<BAUDRATE SET>=============================== Note:'*'indicates the current baudrate Change The HyperTerminal's Baudrate Accordingly <Baudrate Available> <1> 9600(Default)* <2> <3> <4> <5> <0> Exit ============================================================================ Enter your choice(0-5):5 Select the baud rate that you want to use. For example, enter 5 to select bps. The following information appears: Baudrate has been changed to bps. Please change the terminal's baudrate to bps, press ENTER when ready. NOTE: If you use the default baud rate 9600 bps, go to Step Disconnect the HyperTerminal from the router by selecting Call/Disconnect in the HyperTerminal window. Figure 2 Disconnecting the terminal 4. Select File > Properties in the HyperTerminal window, click Configure in the popup dialog box, and select the baud rate of bps in the console port properties dialog box. 6

8 Figure 3 Router Properties dialog box Figure 4 Changing the baud rate 5. Click Call/Call to re-connect to the router. 7

9 Figure 5 Connecting to the router After you press Enter, the following information appears: The current baudrate is bps ===============================<BAUDRATE SET>=============================== Note:'*'indicates the current baudrate Change The HyperTerminal's Baudrate Accordingly <Baudrate Available> <1> 9600(Default) <2> <3> <4> <5> * <0> Exit ============================================================================ Enter your choice(0-5): 6. Type 0 to return to the serial submenu. ===========================<Enter Serial SubMenu>=========================== Note:the operating device is cfa0 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Serial Interface Parameter <0> Exit To Main Menu ============================================================================ Enter your choice(0-5): 7. Enter 2 in the serial submenu to upgrade the main system software image. Please Start To Transfer File, Press <Ctrl+C> To Exit. Waiting...CCCCC Select Transfer > Send File in the HyperTerminal window. In the Send File dialog box that appears, click Browse to select the target image update.bin, and select Xmodem as the protocol. 8

10 Figure 6 Send File dialog box 8. Click Send. The following dialog box appears: Figure 7 Sending the file by using XMODEM When the download is complete, the following information appears: Download successfully! bytes downloaded! Input the File Name:main.bin Updating File cfa0:/main.bin......done! ===========================<Enter Serial SubMenu>=========================== Note:the operating device is cfa0 <1> Download Application Program To SDRAM And Run <2> Update Main Application File <3> Update Backup Application File <4> Update User Private File <5> Modify Serial Interface Parameter <0> Exit To Main Menu ============================================================================ 9

11 Enter your choice(0-5): 9. Enter 0 to return to the BootWare main menu, and then enter 1 to boot the system. NOTE: After the startup, change the baud rate of the HyperTerminal back to 9600 bps by following Step 3 through Step 5. For higher speed, use the Ethernet port instead of the console port to download the system software image. Upgrading the BootWare program at the CLI To upgrade the BootWare program: 1. Copy the new BootWare program to the root directory of the router's storage medium by using FTP or TFTP. 2. Use the following command to upgrade the BootWare program on a card or a list of cards: Task Command Remarks Upgrade the BootWare program on a card or a list of cards. bootrom update file file-url slot slot-number-list Available in user view 3. Reboot the router to make the specified BootWare program take effect. NOTE: The system boot file (with the file extension.bin) comprises the BootWare program, which is automatically upgraded when the system boot file is upgraded. You can also manually upgrade the BootWare program by executing the bootrom update file command. Upgrading the system boot file at the CLI Follow the steps to upgrade the boot file: 1. Save the boot file to the root directory of the storage media on the active MPU by using FTP, TFTP, or other approaches. 2. Copy the boot file to the root directory of the storage media on the standby MPU. 3. Specify the boot file to be used at the next boot of the active MPU and standby MPU respectively at the CLI. 4. Reboot the router to make the new boot file take effect. Specifying a boot file to be used at the next boot When multiple BootWare files are available on the storage media of the router, you can specify a file to be used at the next router boot by executing the following command. A main boot file is used to boot a router and a backup boot file is used to boot a router only when a main boot file is unavailable To specify a file to be used at the next boot of the router: 10

12 Task Command Remarks Specify a file to be used at the next router boot on a card. boot-loader file file-url slot slot-number { main backup } Available in user view. CAUTION: The file for the next router boot must be saved in the root directory of the router. For a router with a partitioned storage media, the file must be saved on the first partition. You can copy or move a file to change the path of it to the root directory. The names of the files for the next boot of the active MPU and the standby MPU may be different, but the versions of the files must be the same. Otherwise, the router may not boot normally. Upgrading the boot file for the standby MPU If the versions of the active MPU and the standby MPU of a router are different, the standby MPU cannot operate normally. With this function, you can upgrade the standby MPU quickly. If this function is enabled: 1. The router copies the current boot file of the active MPU to the standby MPU. 2. The router specifies this boot file as the boot file to be used at the next router boot for the standby MPU. 3. The standby MPU reboots automatically. To upgrade the boot file for the standby MPU: Task Command Remarks Upgrade the boot file for the standby MPU. boot-loader update slot slot-number Available in user view. Upgrading software through hotfix A hotfix is a fast, cost-effective method to repair software defects of a router. Compared with another method, software version upgrade, a hotfix can upgrade the software without interrupting the services running on the router. In other words, it can repair the software defects of the current version without the need for a router reboot. Basic concepts in hotfix Patch and patch file A patch, also called patch unit, is a package to fix software defects. Generally, patches are released as patch files. A patch file may contain one or more patches for different defects. When loaded from the storage media to the memory patch area, each patch is assigned a unique number, which starts from 1, for identification, management and operation. For example, if a patch file has three patch units, they are numbered as 1, 2, and 3 respectively. 11

13 Incremental patch Patches in a patch file are all incremental patches. An incremental patch means that the patch is dependent on the previous patch units. For example, if a patch file has three patch units, patch 3 can be running only after patch 1 and 2 take effect. You cannot run patch 3 separately. Common patch and temporary patch Patch package Patch state Patches fall into two types, common patches and temporary patches. Common patches are those formally released through the version release flow. Temporary patches are those not formally released through the version release flow, but temporarily provided to solve the emergent problems. A patch package contains patches of the same version but for various types of cards. You can install a patch package on a distributed device or an IRF virtual device to upgrade the software of multiple cards at a time. When you execute a patch package, the system automatically finds out the proper patch for each card, and loads them to the cards, simplifying patch operation and patch version management. Each patch has a state, which can be switched only by commands. The relationship between patch state changes and command actions is shown in Figure 8. The patch can be in IDLE, DEACTIVE, ACTIVE, or RUNNING state. Load, run temporarily, confirm running, stop running, delete, install, and uninstall represent operations, corresponding to commands of patch load, patch active, patch run, patch deactive, patch delete, patch install, and undo patch install. For example, if you execute the patch active command for the patches in DEACTIVE state, the patches switch to ACTIVE state. IMPORTANT: Patch state information is saved in Flash memory in the file patchstate. To make sure that the device can correctly find the patches, do not edit, delete, move the file, or change the file name. 12

14 Figure 8 Relationship between patch state changes and command actions IDLE state Patches in IDLE state are not loaded. You cannot activate or run the patches, as shown in Figure 9 (suppose the memory patch area can load up to eight patches). The patches that are in IDLE state are still in IDLE state after system reboot. Figure 9 Patches are not loaded to the memory patch area Memory Patch Area Patch 1 IDLE Patch 2 IDLE Patch 3 IDLE Patch 4 IDLE Patch 5 IDLE Patch 6 IDLE Patch 7 IDLE Patch 8 IDLE DEACTIVE state NOTE: Currently, the system patch area supports up to 200 patches. Patches in DEACTIVE state have been loaded to the memory patch area but have not run in the system yet. Assume that there are seven patches in the patch file to be loaded. After the seven patches pass the version check and CRC check, they are loaded to the memory patch area and are in DEACTIVE state. The patch states in the system are as shown in Figure

15 The patches that are in DEACTIVE state are still in DEACTIVE state after system reboot. Figure 10 A patch file is loaded to the memory patch area ACTIVE state Patches in ACTIVE state are those that have run temporarily in the system and become DEACTIVE after system reboot. For the seven patches in Figure 10, if you activate the first five patches, their patch states change from DEACTIVE to ACTIVE. The patch states in the system are as shown in Figure 11. The patches that are in ACTIVE state are in DEACTIVE state after system reboot. Figure 11 Patches are activated Patch 1 ACTIVE Patch 2 ACTIVE Patch 3 ACTIVE Patch 4 ACTIVE Patch 5 ACTIVE Memory Patch Area Patch 6 DEACTIVE Patch 7 DEACTIVE Patch 8 IDLE RUNNING state After you confirm the running of the ACTIVE patches, the state of the patches changes to RUNNING and the patches are in RUNNING state after system reboot. For the five patches in Figure 11, if you confirm running the first three patches, their states change from ACTIVE to RUNNING. The patch states of the system are as shown in Figure 12. The patches that are in RUNNING state are still in RUNNING state after system reboot. 14

16 Figure 12 Patches are running Patch 1 RUNNING Patch 2 RUNNING Patch 3 RUNNING Patch 4 ACTIVE Patch 5 ACTIVE Memory Patch Area Patch 6 DEACTIVE Patch 7 DEACTIVE Patch 8 IDLE Hotfix configuration task list Task Install patches Uninstall patches Installing a patch in one step Installing a patch step-by-step Uninstalling all patches in one step Uninstalling a patch step-by-step Remarks Use either approach. The step-by-step patch installation allows you to control the patch status. Use either approach. The step-by-step patch uninstallation allows you to control the patch status. CAUTION: Make sure the version of the patch files consistent with that of the current software before loading, activating, and running the patches. Configuration prerequisites Before patching the system, save the appropriate patch files to the storage media of the router with FTP or TFTP. Patches are released according to card type. Make sure the patch files match the router model and card type. Save the patch files to the active MPU and standby MPU so that the patches on the original standby MPU can run after an active and standby switchover. During patching, the system first searches the root directory of the storage media on the active MPU for patch files. Then it compares the patch files with the card type by the patch flag. If they match, the patches are loaded to or installed on the board. The flag suffix is the first three characters of the version item (with the display patch information command). Table 3 describes the default patch for some card types. Table 3 Default patches for different card types Product Cart type Flag Default patch name SR8800 SR02SRP2E3 PATCH-M2E patch_m2e.bin 15

17 Product Cart type Flag Default patch name SR02SRP1E3 SR02SRP1M3 SR02SRP1F3 SR02SRP2F3 SPE-1010 SPE-1020 SPE-1010-E SPE-1020-E IM-FW SPE-1010-II SPE-1020-II SPE-1010-E-II SPE-1020-E-II PATCH-M2F PATCH-LPA PATCH-LPE PATCH-LPL patch_m2f.bin patch_lpa.bin patch_lpe.bin patch_lpl.bin IM-NAT PATCH-NAT patch_nat.bin IM-NAM PATCH-NAM patch_nam.bin IM-NAT-II PATCH-LNT patch_lnt.bin IM-NAM-II PATCH-LNS patch_lns.bin SPC-XP4L SPC-XP2L SPC-GP24L SPC-GP48L SPC-GT48L PATCH-LC patch_lc.bin Installing a patch in one step To install patches in one step, execute the patch install command with specifying either the directory where the patch file locates or the filename of the patch package. After you execute the patch install command, the system displays the "Do you want to continue running patches after reboot? [Y/N]:" message. If you enter: y or Y: All the patches are installed, and turn to RUNNING state from IDLE. This equals execution of the commands patch location, patch load, patch active, and patch run. The patches remain in RUNNING state after system reboot. n or N: All the patches are installed and turn to ACTIVE state from IDLE. This equals execution of the commands patch location, patch load, and patch active. The patches turn to DEACTIVE state after system reboot. To install a patch package, save the patch package file to the storage media of the active MPU. The standby MPU and all interface cards will load the patch file from the active MPU. To install the patches in one step: 16

18 Step Command 1. Enter system view. system-view 2. Install the patches in one step. patch install { patch-location file patch-package } NOTE: The patch matches the card type and software version. If you install a patch file by specifying the directory where the patch file locates, the patch install command will change the patch file location specified with the patch location command to the directory specified by the patch-location argument of the patch install command. If you install a patch file by specifying the filename of the patch package, the patch install command will not change the patch file location specified with the patch location command. To uninstall all patches in one operation, use the undo patch install command, which is the same as performing Uninstalling a patch step-by-step. Installing a patch step-by-step Step-by-step patch installation enables you to control the patch status during the patch installation process. Step-by-step patch installation task list Task Configuring the patch file location Loading a patch file Activating patches running patches Remarks Optional. To install a patch package, skip this step. Required. Required. Optional. Configuring the patch file location If you save the patch files to other storage media except the flash on the router, you need to specify the directory where the patch files locate with the patch-file argument. Then the system loads the appropriate patch files from the specified directory. To configure the path file location: Step Command Remarks 3. Enter system view. system-view N/A 4. Configure the path to the source patch files. patch location patch-file Optional. flash: by default. 17

19 NOTE: The directory specified by the patch-file argument must exist on both the active MPU and standby MPU. If the standby MPU does not have such directory, the system cannot locate the patch files on the original standby MPU after an active and standby switchover. If you install a patch file by specifying the directory where the patch file locates, after the patch install command is executed, the system automatically changes patch file location specified with the patch location command to the directory specified by the patch-location argument of the patch install command. For example, if you execute the patch location xxx command and then the patch install yyy command, the patch file location automatically changes from xxx to yyy. Loading a patch file Loading the right patch files is the basis of other hotfixing operations. If you install a patch from a patch file, the system loads a patch file from the Flash by default. If the system cannot find the patch file on the Flash, it tries to load the patch file from the CF card. If you install a patch from a patch package, the system finds the correct patch file in the patch package file and loads the patch file. CAUTION: Set the file transfer mode to binary mode before using FTP or TFTP to upload or download patch files to or from the flash of the router. Otherwise, patch file cannot be parsed properly. To hotfix a router with active MPU and standby MPU s, make sure that the patch files on the two boards are the same. Otherwise, the router cannot backup the patch states, resulting in patch state loss. To load a patch file: Step Activating patches Command 1. Enter system view. system-view 2. Load the patch file on the storage medium to the memory patch area. patch load slot slot-number [ file patch-package ] After you activate a patch, the patch takes effect and is in the test-run stage. After the router is reset or rebooted, the patch becomes invalid. If you find that an ACTIVE patch is of some problem, you can reboot the router to deactivate the patch, so as to avoid a series of running faults resulting from patch error. To activate patches: Step Command 1. Enter system view. system-view 2. Activate the specified patches. patch active [ patch-number ] slot slot-number Confirm running patches After you confirm that the installed patch is running, the patch state changes to RUNNING, and the patch is in the normal running stage. After the router is reset or rebooted, the patch is still valid. To confirm the running of the patches: 18

20 Step Command 1. Enter system view. system-view 2. Confirm the running of the specified patches. patch run [ patch-number ] [ slot slot-number ] NOTE: This operation is applicable to patches in ACTIVE state only. Uninstalling all patches in one step To uninstall patches from all the cards and OAM CPU in one step, use the undo patch install command. The patches then turn to IDLE state. This equals the execution of the commands patch deactive and patch delete on each card. To uninstall all patches in one step: Step Command Remarks 1. Enter system view. system-view N/A 2. Uninstall all patches in one step. undo patch install Deactivates and deletes all the patches. Uninstalling a patch step-by-step Step-by-step patch uninstallation task list Task Stopping patches Deleting patches Remarks Required Required Stopping patches When you deactivate a patch, the patch state becomes DEACTIVE, and the system runs in the way before it is installed with the patch. To deactivate patches: Step Command 1. Enter system view. system-view 2. Stop running the specified patches. patch deactive [ patch-number ] slot slot-number Deleting patches When a patch is deleted, the system runs in the way before it is installed with the patch. To delete patches: 19

21 Step Command 1. Enter system view. system-view 2. Delete the specified patches from the memory patch area. patch delete [ patch-number ] slot slot-number Upgrading clock card You can use the clock card program saved on the storage medium to upgrade the clock card on the specified MPU. To upgrade a clock card: Task Command Remarks Upgrade the clock card. update clockmcu slot slotnumber file filename Available in user view Upgrading card logic To upgrade the logic of the specified card: Task Command Remarks Upgrade the logic of the specified card. logic update file filename slot slot-number { board subcard } Available in user view. NOTE: If you plug in a line card during upgrading of a logic, you have to wait a comparatively long time for the router to power on this line card. Displaying and maintaining software upgrade configuration Task Command Remarks Display information of the boot file. Display information about the patch package. Display the patch information. display boot-loader [ slot slot-number ] [ { begin exclude include } regular-expression ] display patch [ { begin exclude include } regular-expression ] display patch information [ { begin exclude include } regular-expression ] Available in any view Available in any view Available in any view 20

22 Software upgrade configuration examples Remote upgrade configuration example Network requirements As shown in Figure 13, the router (Device) serves as the FTP client. The SR8800.app application program and the LPUBTR.app BootWare program are both saved in the SR8800 directory of the FTP server. The device and the FTP server can reach each other, and the PC and device can reach each other. Upgrade the software version and Boot ROM version of the device through remote operations. Figure 13 Network diagram Configuration procedure 1. Configure FTP server (the configurations may vary with different types of servers) # Enable the FTP server. <FTP-Server> system-view [FTP-Server] ftp server enable # Set the FTP username to aaa and the password to hello. [FTP-Server] local-user aaa [FTP-Server-luser-aaa] password cipher hello # Configure the user to have read-write permissions on the aaa directory. [FTP-Server-luser-aaa] service-type ftp [FTP-Server-luser-aaa] level 3 [FTP-Server-luser-aaa] authorization-attribute work-directory flash:/ 2. Configure Device CAUTION: If the size of the Flash memory on the router is not large enough, delete the original application programs from the Flash before downloading. # Enter the following command in the user view to log in to the FTP server. <Device> ftp Trying... 21

23 Press CTRL+K to abort Connected to WFTPD 2.0 service (by Texas Imperial Software) ready for new user User( :(none)): aaa 331 Give me your password, please Password: 230 Logged in successfully [ftp] # Download the SR8800.app and LPUBTR.app files from the FTP server to the Flash memory of Device. [ftp] get SR8800.app [ftp] get LPUBTR.app # Clear the FTP connection and return to the user view. [ftp] bye <Device> # Upgrade the BootWare file of the MPU using the file downloaded through FTP. <Device> bootrom update file LPUBTR.app slot 0 # Specify the application program for the next boot on MPU 0. <Device> boot-loader file SR8800.app slot 0 main # When the MPUs of the router work in the active/standby mode, you need to upgrade the program of the standby MPU and specify it as the application program for the next boot. If the standby MPU is in slot 1, the command is as follows: <Device> boot-loader file slot1#flash:/sr8800.app slot 1 main # Reboot the router. The application program is upgraded now. <Device> reboot Hotfix configuration example Network requirements As shown in Figure 14, Device is using software soft-version1. The latest patches are released to fix the defects in version 1, and an upgrading is required. The patch_m2e.bin and patch_lpe.bin patch files are saved in the aaa directory of the FTP server. Device and the FTP server can reach each other. Hotfix the software on the device. 22

24 Figure 14 Network diagram Configuration procedure 1. Configure FTP server (the configuration varies depending on server type) # Enable FTP server. <FTP-Server> system-view [FTP-Server] ftp server enable # Configure an FTP user with the name aaa and password hello. [FTP-Server] local-user aaa [FTP-Server-luser-aaa] password cipher hello # Assign read-write rights for the FTP user aaa. [FTP-Server-luser-aaa] service-type ftp [FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa 2. Configure Device CAUTION: Make sure the free flash space of the device is big enough to store the patches. # Before upgrading the software, use the save command to save the current system configuration. (Details not shown) # Log in to the FTP server. Note that the command output varies depending on server type. <Device> ftp Trying Press CTRL+K to abort Connected to WFTPD 2.0 service (by Texas Imperial Software) ready for new user User( :(none)):aaa 331 Give me your password, please Password: 230 Logged in successfully [ftp] # Download the patch_m2e.bin and patch_lpe.bin files from FTP Server. [ftp] binary [ftp] get patch_m2e.bin 23

25 [ftp] get patch_lpe.bin [ftp] bye <Device> # Copy the patch files to the root directory of the standby MPU in slot 1. <Device> copy patch_m2e.bin slot1#flash:/ <Device> copy patch_lpe.bin slot1#flash:/ # Install the patch. <Device> system-view [Device] patch install flash: Patches will be installed. Continue? [Y/N]:y Do you want to continue running patches after reboot? [Y/N]:y Installing patches... %Aug 8 11:15:30: Sysname MEM/4/WARNING: Patch load completed for slot 0. %Aug 8 11:15:30: Sysname MEM/4/WARNING: Patch load completed for slot 1. %Aug 8 11:15:30: Sysname MEM/4/WARNING: Patch load completed for slot 3. %Aug 8 11:15:30: Sysname MEM/4/WARNING: Patch load completed for slot 3.1 Installation completed, and patches will continue to run after reboot. 24

Software Upgrade Guide

Software Upgrade Guide Contents Software Upgrade Guide 1 Files used for upgrade 1 Upgrade methods 1 Upgrade from the CLI 2 Upgrading a standalone switch 2 Upgrading an IRF fabric 7 Upgrade from the BootWare menu 13 BootWare

More information

HP FlexFabric 12900E Switch Series

HP FlexFabric 12900E Switch Series HP FlexFabric 12900E Switch Series Software Upgrade Guide Part number: 5998-8368 Document version: 6W100-20150930 Legal and notice information Copyright 2015 Hewlett-Packard Development Company, L.P. No

More information

HP 1620 Gigabit Ethernet Switch Series CMW520-R1103 Release Notes

HP 1620 Gigabit Ethernet Switch Series CMW520-R1103 Release Notes HP 1620 Gigabit Ethernet Switch Series CMW520-R1103 Release Notes Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only

More information

H3C S10500 Switch Series Troubleshooting Guide

H3C S10500 Switch Series Troubleshooting Guide H3C S10500 Switch Series Troubleshooting Guide Copyright 2016 Hangzhou H3C Technologies Co., Ltd. All rights reserved. part of this manual may be reproduced or transmitted in any form or by any means without

More information

HP 10500/ G Unified Wired-WLAN Module Release Notes (CMW520-R2308P26)

HP 10500/ G Unified Wired-WLAN Module Release Notes (CMW520-R2308P26) HP 10500/7500 20G Unified Wired-WLAN Module Release Notes (CMW520-R2308P26) Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

More information

H3C S7500E Switch Series Troubleshooting Guide

H3C S7500E Switch Series Troubleshooting Guide H3C S7500E Switch Series Troubleshooting Guide Copyright 2016 Hangzhou H3C Technologies Co., Ltd. All rights reserved. part of this manual may be reproduced or transmitted in any form or by any means without

More information

Operation Manual System Management. Table of Contents

Operation Manual System Management. Table of Contents Table of Contents Table of Contents Chapter 1 File System Management... 1-1 1.1 File System Configuration... 1-1 1.1.1 File System Overview... 1-1 1.1.2 Directory... 1-1 1.1.3 File... 1-2 1.1.4 Storage

More information

H3C S7500E Software Upgrade Configuration Examples

H3C S7500E Software Upgrade Configuration Examples H3C S7500E Software Upgrade Configuration Examples Copyright 2015 Hangzhou H3C Technologies Co., Ltd. A l l ri g h t s re s e r ve d. No part of this manual may be reproduced or transmitted in any form

More information

HP V1910-CMW520-R1108P01 Release Notes

HP V1910-CMW520-R1108P01 Release Notes HP V1910-CMW520-R1108P01 Release Notes HP V1910 Release Notes Keywords: switch, resolved problems, software upgrading Abstract: This release notes describes the V1910 release with respect to hardware and

More information

Table of Contents 1 Commands for Access Controller Switch Interface Board 1-1

Table of Contents 1 Commands for Access Controller Switch Interface Board 1-1 Table of Contents 1 Commands for Access Controller Switch Interface Board 1-1 Commands for Access Controller and Access Controller Switch Interface Board 1-1 acl (user interface view) 1-1 activation-key

More information

Table of Contents 1 FTP and SFTP Configuration TFTP Configuration 2-1

Table of Contents 1 FTP and SFTP Configuration TFTP Configuration 2-1 Table of Contents 1 FTP and SFTP Configuration 1-1 Introduction to FTP and SFTP 1-1 Introduction to FTP 1-1 Introduction to SFTP 1-1 FTP Configuration 1-2 FTP Configuration: A Switch Operating as an FTP

More information

HP 7500-CMW710-R7169P01 Release Notes

HP 7500-CMW710-R7169P01 Release Notes HP 7500-CMW710-R7169P01 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products

More information

HP HSR6600/HSR6800 Routers. Troubleshooting Guide (V7)

HP HSR6600/HSR6800 Routers. Troubleshooting Guide (V7) HP HSR6600/HSR6800 Routers Troubleshooting Guide (V7) Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

More information

HP 1910 Fast Ethernet Switch Series CMW520-R1110 Release Notes

HP 1910 Fast Ethernet Switch Series CMW520-R1110 Release Notes HP 1910 Fast Ethernet Switch Series CMW520-R1110 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties

More information

Using the emergency shell 1

Using the emergency shell 1 Contents Using the emergency shell 1 Emergency shell usage guidelines 1 Managing the file systems 1 Obtaining a system image from an FTP/TFTP server 2 Configuring the management Ethernet interface 2 Checking

More information

HP Load Balancing Module

HP Load Balancing Module HP Load Balancing Module System Management Configuration Guide Part number: 5998-4216 Software version: Feature 3221 Document version: 6PW100-20130326 Legal and notice information Copyright 2013 Hewlett-Packard

More information

Upgrading the Software

Upgrading the Software APPENDIX B Upgrading the Software You can upgrade your software in the following ways: From the Cisco IOS command-line interface (CLI) From the ROM monitor Cisco recommends upgrading your software from

More information

HP A5830 Switch Series Fundamentals. Configuration Guide. Abstract

HP A5830 Switch Series Fundamentals. Configuration Guide. Abstract HP A5830 Switch Series Fundamentals Configuration Guide Abstract This document describes the software features for the HP A Series products and guides you through the software configuration procedures.

More information

H3C WA Series WLAN Access Points. Getting Started Guide

H3C WA Series WLAN Access Points. Getting Started Guide H3C WA Series WLAN Access Points Getting Started Guide Abstract This document describes installation preparation, login, CLI, basic configurations, software maintenance and troubleshooting for the WA series

More information

HP 1950-CMW710-R3108P02 Release Notes

HP 1950-CMW710-R3108P02 Release Notes HP 1950-CMW710-R3108P02 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products

More information

HP 5130-POE-143 Release Notes

HP 5130-POE-143 Release Notes HP 5130-POE-143 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services

More information

Nova series update F/W & Boot code from Boot Utility

Nova series update F/W & Boot code from Boot Utility Nova series update F/W & Boot code from Boot Utility Purpose: Update firmware/boot code from Boot Utility Product Affect: Nova 20S, Nova 20R, Nova 26S, Nova 26R, Nova 27S, Nova 29S, Nova 30S, Nova 30R,

More information

Software Images. About Software Images. Dependent Factors. Send documentation comments to CHAPTER

Software Images. About Software Images. Dependent Factors. Send documentation comments to CHAPTER CHAPTER 10 This chapter describes how to install and upgrade software images, and introduces the file system. It includes the following sections: About, page 10-1 Essential Upgrade Prerequisites, page

More information

HP HSR6800-CMW520-R3103P04 Release Notes

HP HSR6800-CMW520-R3103P04 Release Notes HP HSR6800-CMW520-R3103P04 Release Notes Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products

More information

HPE OfficeConnect 1620 Switch Series CMW520-R1112 Release Notes

HPE OfficeConnect 1620 Switch Series CMW520-R1112 Release Notes HPE OfficeConnect 1620 Switch Series CMW520-R1112 Release Notes The information in this document is subject to change without notice. Copyright 2016 Hewlett Packard Enterprise Development LP i Contents

More information

HPE MSR954P_MSR958-CMW710-R0408P05 Release Notes

HPE MSR954P_MSR958-CMW710-R0408P05 Release Notes HPE MSR954P_MSR958-CMW710-R0408P05 Release Notes The information in this document is subject to change without notice. Copyright [First Year] 2015, [Current Year]2016 Hewlett Packard Enterprise Development

More information

Login management commands

Login management commands Contents Login management commands 1 CLI login configuration commands 1 display telnet client configuration 1 telnet 1 telnet ipv6 2 telnet server enable 3 User interface configuration commands 3 acl (user

More information

Table of Contents. 1 TFTP Configuration Commands 1-1 TFTP Client Configuration Commands 1-1 tftp-server acl 1-1 tftp 1-2 tftp ipv6 1-3

Table of Contents. 1 TFTP Configuration Commands 1-1 TFTP Client Configuration Commands 1-1 tftp-server acl 1-1 tftp 1-2 tftp ipv6 1-3 Table of Contents 1 TFTP Configuration Commands 1-1 TFTP Client Configuration Commands 1-1 tftp-server acl 1-1 tftp 1-2 tftp ipv6 1-3 i 1 TFTP Configuration Commands TFTP Client Configuration Commands

More information

Emergency shell commands 1

Emergency shell commands 1 Contents Emergency shell commands 1 copy 1 delete 1 dir 2 display copyright 4 display install package 4 display interface m-eth0 5 display ip routing-table 7 display ipv6 routing-table 7 display version

More information

HP 5500 EI & 5500 SI Switch Series

HP 5500 EI & 5500 SI Switch Series HP 5500 EI & 5500 SI Switch Series Fundamentals Configuration Guide Part number: 5998-1707 Software version: Release 2220 Document version: 6W100-20130810 Legal and notice information Copyright 2013 Hewlett-Packard

More information

Contents. TFTP configuration commands 29 display tftp client configuration 29 tftp-server acl 29 tftp 30 tftp client source 32 tftp ipv6 33

Contents. TFTP configuration commands 29 display tftp client configuration 29 tftp-server acl 29 tftp 30 tftp client source 32 tftp ipv6 33 Contents FTP configuration commands 1 FTP server configuration commands 1 display ftp-server 1 display ftp-user 2 free ftp user 3 ftp server acl 3 ftp server enable 4 ftp timeout 5 ftp update 5 FTP client

More information

HPE 5510HI-CMW710-R1111P01 Release Notes

HPE 5510HI-CMW710-R1111P01 Release Notes HPE 5510HI-CMW710-R1111P01 Release Notes Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HPE products

More information

MOP for upgrading StoneOS

MOP for upgrading StoneOS MOP for upgrading StoneOS Make a backup of current configurations A. WebUI: Refer to the image below, click tab System menu Configuration File Management, check the box before the Startup configuration

More information

Performing Software Maintenance Upgrades (SMUs)

Performing Software Maintenance Upgrades (SMUs) Performing Software Maintenance Upgrades (SMUs) This chapter describes how to perform software maintenance upgrades (SMUs) on Cisco Nexus 3000 Series switches. This chapter includes the following sections:

More information

HP 6125 Blade Switch Series

HP 6125 Blade Switch Series HP 6125 Blade Switch Series Fundamentals Configuration Guide Part number: 5998-3153 Software version: Release 2103 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard

More information

Logging in to the CLI

Logging in to the CLI Contents Logging in to the CLI 1 Login methods 1 Logging in through the console port 2 Introduction 2 Configuration procedure 2 Logging in through the AUX port 5 Configuration prerequisites 5 Configuration

More information

File Transfers. Contents

File Transfers. Contents A File Transfers Contents Overview.................................................... A-3................................ A-3 General Software Download Rules............................ A-4 Using TFTP

More information

H3C S5120-EI Switch Series

H3C S5120-EI Switch Series H3C S5120-EI Switch Series Fundamentals Configuration Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release 2220 Document version: 6W100-20130810 Copyright 2013, Hangzhou

More information

ROM Monitor. Using ROM Monitor APPENDIX

ROM Monitor. Using ROM Monitor APPENDIX APPENDIX A ROM Monitor This appendix describes the Cisco 805 router ROM monitor. The ROM monitor runs when the router is powered up or reset and helps to initialize the processor hardware and boot the

More information

HP 6125G & 6125G/XG Blade Switches

HP 6125G & 6125G/XG Blade Switches HP 6125G & 6125G/XG Blade Switches Fundamentals Configuration Guide Part number: 5998-3153a Software version: Release 2103 and later Document version: 6W102-20141218 Legal and notice information Copyright

More information

HP 1910-CMW520-R1511 Release Notes

HP 1910-CMW520-R1511 Release Notes HP 1910-CMW520-R1511 Release Notes HP 1910 Release Notes Keywords: switch, resolved problems, software upgrading Abstract: This release notes describes the HP1910 release with respect to hardware and software

More information

H3C WA Series WLAN Access Points. Fundamentals Command Reference

H3C WA Series WLAN Access Points. Fundamentals Command Reference H3C WA Series WLAN Access Points Fundamentals Command Reference Abstract This document details the commands for the WA series WLAN access points. Intended audience includes network planners, field technical

More information

Working with Configuration Files

Working with Configuration Files This chapter contains the following sections: Finding Feature Information, page 1 Information About Configuration Files, page 1 Licensing Requirements for Configuration Files, page 2 Managing Configuration

More information

Table of Contents Chapter 1 Configuration File Management Commands

Table of Contents Chapter 1 Configuration File Management Commands Table of Contents Table of Contents... 1-1 1.1.1 display current-configuration... 1-1 1.1.2 display saved-configuration... 1-6 1.1.3 display this... 1-7 1.1.4 display startup... 1-8 1.1.5 reset saved-configuration...

More information

ACSEI configuration commands

ACSEI configuration commands Contents ACSEI configuration commands 1 acsei client reboot 1 acsei server 1 acsei server enable 2 acsei timer clock-sync 2 acsei timer monitor 3 display acsei client info 3 display acsei client summary

More information

Upgrading or Downgrading the Cisco Nexus 3500 Series NX-OS Software

Upgrading or Downgrading the Cisco Nexus 3500 Series NX-OS Software Upgrading or Downgrading the Cisco Nexus 3500 Series NX-OS Software This chapter describes how to upgrade or downgrade the Cisco NX-OS software. It contains the following sections: About the Software Image,

More information

HP MSR Routers Troubleshooting Guide (Comware V7)

HP MSR Routers Troubleshooting Guide (Comware V7) HP MSR Routers Troubleshooting Guide (Comware V7) H3C MSR1000 Router Series H3C MSR2000 Router Series H3C MSR3000 Router Series H3C MSR4000 Router Series Software version: MSR-CMW710-R0106 Document version:

More information

Managing file systems 1

Managing file systems 1 Contents Managing file systems 1 Overview 1 File systems 1 Directories 2 Files 2 Specifying a directory name or file name 3 FIPS compliance 3 File system management restrictions and guidelines 4 Managing

More information

HP 3600 v2 Switch Series

HP 3600 v2 Switch Series HP 3600 v2 Switch Series Fundamentals Command Reference Part number: 5998-7608 Software version: Release 2110P02 Document version: 6W100-20150305 Legal and notice information Copyright 2015 Hewlett-Packard

More information

Table of Contents 1 Basic Configuration Commands 1-1

Table of Contents 1 Basic Configuration Commands 1-1 Table of Contents 1 Basic Configuration Commands 1-1 Basic Configuration Commands 1-1 clock datetime 1-1 clock summer-time one-off 1-1 clock summer-time repeating 1-2 clock timezone 1-4 command-privilege

More information

File system management commands 1

File system management commands 1 Contents File system management commands 1 cd 1 copy 3 delete 5 dir 7 fdisk 9 file prompt 11 fixdisk 11 format 12 gunzip 12 gzip 13 md5sum 14 mkdir 14 more 15 mount 16 move 17 pwd 18 rename 18 reset recycle-bin

More information

Lenovo Flex System SI Gb System Interconnect Module. Release Notes. for Networking OS 8.2

Lenovo Flex System SI Gb System Interconnect Module. Release Notes. for Networking OS 8.2 Lenovo Flex System SI4091 10Gb System Interconnect Module Release Notes for Networking OS 8.2 Note: Before using this information and the product it supports, read the general information in the Safety

More information

Performing Software Maintenance Upgrades

Performing Software Maintenance Upgrades This chapter describes how to perform software maintenance upgrades (SMUs) on Cisco NX-OS devices. This chapter includes the following sections: About SMUs, page 1 Prerequisites for SMUs, page 3 Guidelines

More information

HPE OfficeConnect 1920 Switch Series CMW520-R1115 Release Notes

HPE OfficeConnect 1920 Switch Series CMW520-R1115 Release Notes HPE OfficeConnect 1920 Switch Series CMW520-R1115 Notes The information in this document is subject to change without notice. Copyright 2016 Hewlett Packard Enterprise Development LP i Contents Version

More information

Configurations for the Layer 3 Switch Router

Configurations for the Layer 3 Switch Router CHAPTER 3 This chapter describes the initial configuration of the Layer 3 switch router and contains the following major sections: Starting Up the Layer 3 Switch Router, page 3-1 Using the Console and

More information

Flash Size : 128MB CPLD Version : 002. PCB Version : Ver.B Mac Address : 4001C67AA1C0

Flash Size : 128MB CPLD Version : 002. PCB Version : Ver.B Mac Address : 4001C67AA1C0 Flash Size CPLD Version : 128MB : 002 Starting to get the main application file--flash:/s2900-cmw520-r1101p09.bin!...... The main application file is self-decompressing.........done! System is starting...

More information

Contents. TFTP configuration commands 28 display tftp client configuration 28 tftp-server acl 28 tftp 29 tftp client source 30 tftp ipv6 31

Contents. TFTP configuration commands 28 display tftp client configuration 28 tftp-server acl 28 tftp 29 tftp client source 30 tftp ipv6 31 Contents FTP configuration commands 1 FTP server configuration commands 1 display ftp-server 1 display ftp-user 2 free ftp user 3 ftp server acl 3 ftp server enable 4 ftp timeout 4 ftp update 5 FTP client

More information

Operation Manual Cluster Management. Table of Contents

Operation Manual Cluster Management. Table of Contents Table of Contents Table of Contents... 1-1 1.1 HGMP V1 Over... 1-1 1.2 HGMP Server Configuration... 1-2 1.2.1 Enabling HGMP Server on a Management Device... 1-2 1.2.2 Upgrading Software on a Switch through

More information

Configuration Guide. Upgrading AOS Firmware L1-29.1D July 2011

Configuration Guide. Upgrading AOS Firmware L1-29.1D July 2011 61200990L1-29.1D July 2011 Configuration Guide This configuration guide explains how to update your ADTRAN Operating System (AOS) firmware using the AOS Web-based graphical user interface (GUI) with Trivial

More information

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.2

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.2 Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.2 The Cisco Network Analysis Module (NAM) is an integrated module that enables network managers

More information

Installation Manual. Table of Contents

Installation Manual. Table of Contents Table of Contents Table of Contents Chapter 1 Product Overview... 1-1 1.1 Introduction... 1-1 1.2 S3100-52P Ethernet Switch... 1-1 1.2.1 Front Panel... 1-1 1.2.2 Rear Panel... 1-5 1.3 System Features of

More information

H3C S9500E Series Routing Switches

H3C S9500E Series Routing Switches H3C S9500E Series Routing Switches IRF Configuration Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: S9500E-CMW520-R1725 Document version: 6W170-20111118 Copyright 2011,

More information

HP A3100 v2 Switch Series

HP A3100 v2 Switch Series HP A3100 v2 Switch Series Fundamentals Command Reference HP A3100-8 v2 SI Switch (JG221A) HP A3100-16 v2 SI Switch (JG222A) HP A3100-24 v2 SI Switch (JG223A) HP A3100-8 v2 EI Switch (JD318B) HP A3100-16

More information

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image Document ID: 41845 Introduction Prerequisites Requirements Components Used Conventions Problem Switch Displays the Switch:

More information

H3C S5830V2 & S5820V2 Switch Series

H3C S5830V2 & S5820V2 Switch Series H3C S5830V2 & S5820V2 Switch Series Security Command Reference Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: Release2108 Document version: 6W101-20120531 Copyright 2012, Hangzhou

More information

RC001-NMS1 (REV.C) User Manual

RC001-NMS1 (REV.C) User Manual RC001-NMS1 (REV.C) User Manual Raisecom Technology Co., Ltd (08/2005) CONTENTS Chapter 1. System Overview...2 1.1 RC002-16 Chassis...2 1.2 RC001-NMS1 Master Network Management Module...2 1.3 RC001-NMS2

More information

Command-Line Interfaces

Command-Line Interfaces CHAPTER 2 This chapter describes the CLIs you use to configure the Catalyst 4500 series switch. This chapter includes the following major sections: Accessing the Switch CLI, page 2-2 Performing Command-Line

More information

Command-Line Interfaces

Command-Line Interfaces CHAPTER 2 This chapter describes the CLIs you use to configure the Catalyst 4500 series switch. This chapter includes the following major sections: Accessing the Switch CLI, page 2-1 Performing Command-Line

More information

HP 6125 Blade Switch Series

HP 6125 Blade Switch Series HP 6125 Blade Switch Series Installation Guide Part number: 5998-3151 Document version: 6W100-20120907 Legal and notice information Copyright 2012 Hewlett-Packard Development Company, L.P. No part of this

More information

Assigning the Switch IP Address and Default Gateway

Assigning the Switch IP Address and Default Gateway CHAPTER 4 Assigning the Switch IP Address and Default Gateway This chapter describes how to create the initial switch configuration (for example, assigning the switch IP address and default gateway information)

More information

HP 3600 v2 Switch Series

HP 3600 v2 Switch Series HP 3600 v2 Switch Series Fundamentals Command Reference Part number: 5998-2359 Software version: Release 2101 Document version: 6W101-20130930 Legal and notice information Copyright 2013 Hewlett-Packard

More information

Table of Contents 1 FTP Configuration Commands TFTP Configuration Commands 2-1

Table of Contents 1 FTP Configuration Commands TFTP Configuration Commands 2-1 Table of Contents 1 FTP Configuration Commands 1-1 FTP Client Configuration Commands 1-1 ascii 1-1 binary 1-2 bye 1-2 cd 1-3 cdup 1-4 close 1-4 debugging 1-5 delete 1-6 dir 1-6 disconnect 1-8 display ftp

More information

Configuring IPv6 DNS. Introduction to IPv6 DNS. Configuring the IPv6 DNS client. Configuring static domain name resolution

Configuring IPv6 DNS. Introduction to IPv6 DNS. Configuring the IPv6 DNS client. Configuring static domain name resolution Contents Configuring IPv6 DNS 2 Introduction to IPv6 DNS 2 Configuring the IPv6 DNS client 2 Configuring static domain name resolution 2 Configuring dynamic domain name resolution 2 Displaying and maintaining

More information

Configuring Host Router and Cisco Analog Video Gateway Module Interfaces

Configuring Host Router and Cisco Analog Video Gateway Module Interfaces Configuring Host Router and Cisco Analog Video Gateway Module Interfaces Last Updated: August 17, 2009 To configure the Cisco Analog Video Gateway network module after it is installed in your host Cisco

More information

Maintaining the System Software

Maintaining the System Software CHAPTER 2 This chapter covers the tasks required for maintaining a Content Engine. Upgrading the System Software, page 2-1 Recovering the System Software, page 2-2 Maintaining the Hard Disk Storage, page

More information

H3C WA Series WLAN Access Points. Getting Started Guide. Hangzhou H3C Technologies Co., Ltd. Document Version:6W

H3C WA Series WLAN Access Points. Getting Started Guide. Hangzhou H3C Technologies Co., Ltd.  Document Version:6W H3C WA Series WLAN Access Points Getting Started Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document Version:6W100-20100910 Copyright 2010, Hangzhou H3C Technologies Co., Ltd. and its

More information

Management Software AT-S79. User s Guide. For use with the AT-GS950/16 and AT-GS950/24 Smart Switches. Version Rev.

Management Software AT-S79. User s Guide. For use with the AT-GS950/16 and AT-GS950/24 Smart Switches. Version Rev. Management Software AT-S79 User s Guide For use with the AT-GS950/16 and AT-GS950/24 Smart Switches Version 1.0.0 613-000207 Rev. A Copyright 2005 Allied Telesyn, Inc. All rights reserved. No part of this

More information

Lab 6.2.7a Managing Switch Operating System Files

Lab 6.2.7a Managing Switch Operating System Files Lab 6.2.7a Managing Switch Operating System Files Objective Create and verify a basic switch configuration. Backup the switch IOS to a TFTP server and then restore it. Background/Preparation Cable a network

More information

1. PRODUCTS AFFECTED OVERVIEW REASON FOR UPGRADE EVERTZ SERVICE CONTACT INFORMATION FIRMWARE UPGRADE...

1. PRODUCTS AFFECTED OVERVIEW REASON FOR UPGRADE EVERTZ SERVICE CONTACT INFORMATION FIRMWARE UPGRADE... 1. PRODUCTS AFFECTED... 2 2. OVERVIEW... 2 3. REASON FOR UPGRADE... 2 3.1. FEATURE ENHANCEMENTS AVAILABLE IN RELEASE 2.6 BUILD 6... 3 4. EVERTZ SERVICE CONTACT INFORMATION... 3 5. FIRMWARE UPGRADE... 3

More information

Initial Configuration on ML-Series Card

Initial Configuration on ML-Series Card CHAPTER 3 This chapter describes the initial configuration of the ML-Series card and contains the following major sections: Hardware Installation, page 3-1 Cisco IOS on the ML-Series Card, page 3-2 Startup

More information

H3C SecBlade SSL VPN Card

H3C SecBlade SSL VPN Card H3C SecBlade SSL VPN Card Super Administrator Web Configuration Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document version: 5PW105-20130801 Copyright 2003-2013, Hangzhou H3C Technologies

More information

No Service Password-Recovery

No Service Password-Recovery No Service Password-Recovery Last Updated: January 18, 2012 The No Service Password-Recovery feature is a security enhancement that prevents anyone with console access from accessing the router configuration

More information

Switch Memory and Configuration

Switch Memory and Configuration 6 Switch Memory and Configuration Contents Overview..................................................... 6-3 Overview of Configuration File Management................... 6-3 Using the CLI To Implement

More information

Using the Cisco NX-OS Setup Utility

Using the Cisco NX-OS Setup Utility This chapter contains the following sections: Configuring the Switch, page 1 Configuring the Switch Image Files on the Switch The Cisco Nexus devices have the following images: BIOS and loader images combined

More information

Using the Cisco NX-OS Setup Utility

Using the Cisco NX-OS Setup Utility This chapter contains the following sections: Configuring the Switch, page 1 Configuring the Switch Image Files on the Switch The Cisco Nexus devices have the following images: BIOS and loader images combined

More information

Table of Contents 1 FTP Configuration Commands TFTP Configuration Commands 2-1

Table of Contents 1 FTP Configuration Commands TFTP Configuration Commands 2-1 Table of Contents 1 FTP Configuration Commands 1-1 FTP Server Configuration Commands 1-1 display ftp-server 1-1 display ftp-user 1-2 free ftp user 1-3 ftp server acl 1-3 ftp server enable 1-4 ftp timeout

More information

TrangoLINK GigaPlus. Software v1.3.3 Release Notes & Upgrade Instructions. 16 December 2011

TrangoLINK GigaPlus. Software v1.3.3 Release Notes & Upgrade Instructions. 16 December 2011 Software v1.3.3 Release Notes & Upgrade Instructions 16 December 2011 2010-2011 Trango Systems, Inc. All rights reserved. Page 1 of 13 v1.3.3 Release The release consists of the following software images

More information

File Upload and File Download FSOS

File Upload and File Download FSOS FSOS File Upload and File Download 1 Contents 1. File Upload and File Download... 1 1.1 Overview for File Download...1 1.1.1 Configure file download... 1 1.1.2 Configuration Example for File Download...2

More information

HP 3600 v2 Switch Series

HP 3600 v2 Switch Series HP 3600 v2 Switch Series IRF Configuration Guide Part number: 5998-2349a Software version: Release 2108P01 Document version: 6W100-20131130 Legal and notice information Copyright 2013 Hewlett-Packard Development

More information

HP Load Balancing Module

HP Load Balancing Module HP Load Balancing Module System Maintenance Configuration Guide Part number: 5998-4221 Software version: Feature 3221 Document version: 6PW100-20130326 Legal and notice information Copyright 2013 Hewlett-Packard

More information

TrangoLINK GigaPlus. Software v1.3.2 Release Notes & Upgrade Instructions. 3 October 2011

TrangoLINK GigaPlus. Software v1.3.2 Release Notes & Upgrade Instructions. 3 October 2011 Software v1.3.2 Release Notes & Upgrade Instructions 3 October 2011 2010-2011 Trango Systems, Inc. All rights reserved. Page 1 of 15 Table of Contents Image Updates Supported Modulation/Symbol rate combination

More information

User authentication configuration example 11 Command authorization configuration example 13 Command accounting configuration example 14

User authentication configuration example 11 Command authorization configuration example 13 Command accounting configuration example 14 Contents Logging in to the CLI 1 Login methods 1 Logging in through the console or AUX port 2 Logging in through Telnet 5 Telnetting to the switch 5 Telnetting from the switch to another device 7 Logging

More information

Configuring a Core Dump on a GSR Line Card

Configuring a Core Dump on a GSR Line Card Configuring a Core Dump on a GSR Line Card Document ID: 12769 Contents Introduction Prerequisites Requirements Components Used Conventions Configure and Test Core Dump Core Dump Configuration Test the

More information

HP 5500 HI Switch Series

HP 5500 HI Switch Series HP 5500 HI Switch Series IRF Configuration Guide Part number: 5998-2376a Software version: Release 5203 and Release 5206 Document version: 6W102-20140228 Legal and notice information Copyright 2014 Hewlett-Packard

More information

HPE FlexFabric 5700 Switch Series

HPE FlexFabric 5700 Switch Series HPE FlexFabric 5700 Switch Series Fundamentals Command Reference Part number: 5998-5600R Software version: Release 2422P01 and later Document version: 6W100-20160331 Copyright 2016 Hewlett Packard Enterprise

More information

Contents. FTP commands 1

Contents. FTP commands 1 Contents FTP commands 1 FTP server commands 1 display ftp-server 1 display ftp-user 1 free ftp user 2 free ftp user-ip 3 free ftp user-ip ipv6 3 ftp server acl 4 ftp server dscp 5 ftp server enable 5 ftp

More information

S38 Basic Configuration

S38 Basic Configuration S38 Basic Configuration Contents 1 Web Login Summary...1 1.1 Overview...1 1.2 Management IP/ Route Configuration...1 1.3 User Configuration...2 1.4 Http Configuration...2 1.5 Web Login...3 2 Firmware upgrade...5

More information

Copying Files With XMODEM

Copying Files With XMODEM Copying Files With XMODEM What Is XMODEM XMODEM is a simple file transfer protocol which became extremely popular in the early bulletin board system (BBS) market, largely because it was so simple to implement.

More information

Release Notes Software Version 2.41

Release Notes Software Version 2.41 Release Notes Software Version 2.41 3Com Router 3036 and Router 3040/3041 Router 3036 (3C13636) Router 3040 (3C13640) Router 3041 (3C13641) Contents 1. Introduction...............................................2

More information

Table of Contents 1 Basic Configuration Commands 1-1

Table of Contents 1 Basic Configuration Commands 1-1 Table of Contents 1 Basic Configuration Commands 1-1 Basic Configuration Commands 1-1 clock datetime 1-1 clock summer-time one-off 1-2 clock summer-time repeating 1-3 clock timezone 1-4 configure-user

More information