Note: Not every command has a keyboard shortcut. Also, in some cases three-letter commands are used instead of two such as Layer Manager (MGL).
|
|
- Anis Lynne Preston
- 5 years ago
- Views:
Transcription
1 2-Letter Shortcuts and other time saving tools! Shave off time and increase productivity in the diagram program using two-letter commands. Nearly every command has an associated two-letter command. A command can be invoked by typing the two character shortcut. For example to invoke the Linear Copy command, you can type CO (or of course start it from the menu or toolbar). Most of the two-letter commands are mnemonic making them easy to remember, such as; ZA Zoom All or RD Redraw. Note: Not every command has a keyboard shortcut. Also, in some cases three-letter commands are used instead of two such as Layer Manager (MGL). This report contains a complete list of the shortcut commands. You can also find the two letter command on the commands tooltip or the pull-down menus next to the command. A tooltip or pull-down menu command will look like this; Quick list of shortcut commands. Start using two letter shortcut commands while you re diagramming and create your own list. In the beginning it s helpful to keep a hand written list of your favorite shortcuts near your computer while you re incorporating them into your work flow. If you find that you re using a specific command regularly then find its shortcut and add it to you list. Xtras the Commands not listed in the program. There are commands you may find useful that are not even listed in the program and can only be accessed by their two-letter description. In the shortcut command list look you will find the unlisted commands at the end of each section under xtras. For example, here s a command for an elliptical arc. You won t find this type of arc in the program menus. draw xtras EA, Elliptical Arc
2 More time saving tools. Use the Spacebar to repeat the last command. Use the Right Mouse Click to bring up helpful tools, Properties, and context sensitive tools associated with the current process. Example: While drawing a continuous line open up the right click menu to access these commands associated with the continuous line tool; Finish, Close Contour, Undo Last Vertex, and Explode Continuous Lines. Use the Escape key to back undo the last vertex while drawing a continuous line, curve, arc, dimension, etc Use the Mouse Wheel to zoom in and out of your drawing. Hold down the mouse wheel to pan. Double click on existing text or dimensions to bring up the Text Edit or Dimension Edit dialog. Hold down the Control key to toggle in and out of Ortho mode. Drag a Selection Window from left to right to only capture objects completely inside the window. Drag from right to left to capture objects inside or touching the window. Hold down the Shift key and click on objects to add or remove from the current selection. 2-Letter Commands Master List: Speedbar (Horizontal Row of Buttons along Top of Screen) file commands FN, File New FO, File Open DS, File Save cut, copy, paste CTRL X, Cut CTRL C, Copy CTRL V, Paste print PR, File Print undo, redo OO, Undo RE, Redo properties PP, Properties (Right Click) angle draw commands O9, Ortho 90 degrees O4, Ortho 45 degrees CF, Cursor Free OT, Angle Trap auto snap AU, Auto Snap layer manager MGL, Layer Manager units UN, Units coordinate manual entry CE, Coordinate Manual Entry reset RV, Reset view commands RD, Regen (Redraw or Refresh) ZW, Zoom Window
3 ZA, Zoom All ZO, Zoom Out ZI, Zoom In PA, Pan (Hold down mouse wheel) 3D tools B3, 3D Builder M3, 3D Viewer Learning Center LR, Learning Center Right click menus selection S1, Selection Bar ME, Match Entity continuous entity controls PU, Finish CC, Close Contour UV, Undo Last Vertex CX, Explode Continuous Line heads up display CU, Heads-Up Display Pull-Down Menus FILE FN, File New FO, File Open FC, File Close DS, File Save FA, File Save As FM, File Merge BI, Import Images (bmp, jpg, wmf, png) BM, Import Satellite Images VB, Export Images (bmp, jpg, wmf, png) PR, Print PT, Print Setup FX, File Exit file xtras FU, Run EDIT OO, Undo RE, Redo CTRL X, Cut CTRL C, Copy CTRL V, Paste selection tools SA, Select All
4 SB, Select Object SW, Select Window SX, Select Crossing SL, Select Last SJ, Select Adjoin SY, Select Layer IS, Invert Selection S1, Selection Bar copy commands CO, Copy AC, Array Copy RC, Radial Copy MC, Multi Copy general modify commands MV, Move MP, Move Point BR, Break RO, Rotate SZ, Scale SS, Stretch WS, Window Stretch MI, Mirror trim commands TR, Trim/Extend FI, Fillet (Round Corners) CT, Cutout IT, Double Line Intersection Clean LN, Multi-lane Intersection Clean offset command OF, Double It Up group commands GT, Group GU, UnGroup explode EX, Explode edit commands ED, Edit ER, Delete (Erase) MX, Erase Blue Markers align common points AG, Align Common Points modify xtras CS, Selection Clear LO, Select Last Object CG, Change AF, Auto Fillet (toggle) FR, Fillet Radius CH, Chamfer C0, Chamfer Distance DX, Clear PU, Pen Up (Finish) EL, Erase Last FT, Fit Scale
5 MT, Match Tool modify shortcuts (quick selection) WS, Window Stretch WE, Window Erase OE, Object Erase WM, Window Move OM, Object Move WC, Window Copy OC, Object Copy WT, Window Rotate DT, Drawing Rotate WG, Window Change DG, Drawing Change WZ, Window Scale DZ, Drawing Scale DRAW point PO, Point lines LS, Single Line LC, Continuous Line LD, Double Line AW, Arrow curve CV, Curve polygons R2, 2 Point Rectangle R3, 3 Point Rectangle PC, Center Regular Polygon PS, Side Regular Polygon circles C2, 2 Point Circle C3, 3 Point Circle CD, Diameter Circle EP, Ellipse arcs A3, 3 Point Arc A2, 2 Point Arc AM, 3 Point Arc AX, Arc Tangent symbol commands MGY, Symbol Manager YC, Symbol Create YX, Symbol Explode ez tools EZL, Easy Lines IW, Easy Intersection EZS, Easy Street EZB, Bodies (Old Body Poser) T3, Templates HA, Texture/Hatch
6 layer manager MGL, Layer Manager forms EZO, Scaled Borders draw xtras DB, Double Line Settings EA, Elliptical Arc BS, Bezier Single BC, Bezier Continuous IP, Irregular Polygon DC, Construction Points DH, Symbol Handle Points DV, Curve Tangent Points symbol xtras IR, Symbol Dynamic Rotate IZ, Symbol Dynamic Scale YL, Symbol Last YR, Symbol Replace YV, Symbol Remove IR, Dynamic Rotate IZ, Dynamic Scale hatch/fill xtras HB, Hatch Boundary HD, Seed Hatch HT, Hatch Settings HS, Hatch Selected FS, Fill Selected FB, Fill Boundary FD, Seed Fill WH, Window Hatch WF, Window Fill VIEW RD, Redraw ZA, Zoom All ZW, Zoom Window ZI, Zoom In ZO, Zoom Out ZP, Zoom Previous PA, Zoom Pan ZN, Zoom View NV, Name View TF, Bring to Front TB, Send to Back NI, Night Vision view xtras ZB, Birds Eye ZS, Zoom Selected BA, Backward Redraw RW, Regen Area
7 SNAPS AU, Auto Snap OT, Angle Trap SC, Snap Closest SO, Snap Object SM, Snap Midpoint SI, Snap Intersection SP, Snap Perpendicular ST, Snap Tangent SN, Snap Center angle draw commands OR, Ortho Mode OA, Ortho Angle CF, Cursor Free OT, Angle Trap grid commands GR, Grid Display SG, Snap Grid GS, Grid Size GO, Grid Origin snaps xtras QS, Quick Search NP, Snap Nearest S2, Snap 2 Midpoints SQ, Snap Quadrant LP, Snap Last Point TK, Track coordinate commands MO, Absolute Coordinates MR, Relative Coordinates MB, Basepoint Coordinates BP, Set Base Point TEXT & DIMENSIONS text commands QL, Text B4, Bubble Labels AW, Arrow dimension commands QD, Dimension OL, Object Length DA, Dimension Angle DR, Dimension Radius measure commands MD, Measure Distance & Angles MA, Measure Area text and dimension xtras TL, Text Line TE, Text Editor LE, Leader LA, Load ASCII DD, Dimension Diameter
8 DO, Dimension Ordinate AR, Arrow Flip PF, Proximity Fixed OFF UTILITIES UN, Units CE, Coordinate Manual Entry MGL, Layer Manager OI, Object Info RV, Reset to Factory Defaults utilities xtras YD, Layer Display YH, Layer Hide AL, All Layer Edit NL, Snap Layer PD, Pack Data RECON-ANIMATE MD, Measure Distance Q1, Add KEP KP, Lock Symbol to Path AN, Animate 3D M3, 3D B3, 3D Builder WV, Wall Evidence S3, Snapshot Manager ATO, Auto Surface EZU, Easy Surface AE, Ground Level Adjust HELP LR, Learning Center
Scorciatoie da tastiera - Circad 4.09
Scorciatoie da tastiera - Circad 4.09 File FE New File - File FO Open File - File FR Re-Open - File FT Total Recall - File FD Load - File FC Close File - File FE Erase File - File FS Save File - File FA
More informationK e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationMouse Navigation. Middle Button (wheel) Pan. Click + Drag. Re-Center View. Double-Click. Context Menu. Tool Operation. Click. Click. Multi-Select.
BLUEBEAM REVU KEYBOARD SHORTCUTS Mouse Navigation Middle Button (wheel) Pan Re-Center View Click + Drag Double-Click Left Button Right Button Tool Operation Click Context Menu Click Pan Click + Spacebar
More informationPAGE TITLE KEYBOARD SHORTCUTS
PAGE TITLE KEYBOARD SHORTCUTS DEFAULT KEYBOARD SHORTCUTS MARKUP Align Bottom Ctrl + Alt + B Align Center Ctrl + Alt + E Align Left Ctrl + Alt + L Align Middle Ctrl + Alt + M Align Right Ctrl + Alt + R
More information7/21/2009. Chapters Learning Objectives. Fillet Tool
Chapters 12-13 JULY 21, 2009 Learning Objectives Chapter 12 Chapter 13 Use the FILLET tool to draw fillets, rounds, and other rounded corners. Place chamfers and angled corners with the CHAMFER tool. Separate
More informationSPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN
SPAREPARTSCATALOG: CONNECTORS ART.-NR.: 3CM3208201EN CONTENT SPARE CONNECTORS AA-AN SPARE CONNECTORS AO-BC SPARE CONNECTORS BD-BQ SPARE CONNECTORS BR-CD 3 4 5 6 SPARE CONNECTORS CE-CR SPARE CONNECTORS
More informationFactoryLink 7. Version 7.0. Client Builder Reference Manual
FactoryLink 7 Version 7.0 Client Builder Reference Manual Copyright 2000 United States Data Corporation. All rights reserved. NOTICE: The information contained in this document (and other media provided
More informationSPARE CONNECTORS KTM 2014
SPAREPARTSCATALOG: // ENGINE ART.-NR.: 3208201EN CONTENT CONNECTORS FOR WIRING HARNESS AA-AN CONNECTORS FOR WIRING HARNESS AO-BC CONNECTORS FOR WIRING HARNESS BD-BQ CONNECTORS FOR WIRING HARNESS BR-CD
More informationADAPT-Builder. Toolbar Descriptions Updated November Copyright All rights reserved 2017
ADAPT-Builder Toolbar Descriptions Updated November 2017 Copyright All rights reserved 2017 Main Toolbar The Main Toolbar is where the typical functions that are in most programs such as New, Open, Save,
More informationWelcome to Easy Plan 5.0!
Welcome to 5.0! This manual introduces you to, a drawing program for creating pre fire and site diagrams. It explains how to get help with the program, program basic concepts, and includes a basic tutorial
More informationQuick Reference AutoCAD Release 2004
www.hyperpics.com Quick Reference AutoCAD Release 2004 Keyboard Shortcuts Drag 'n Drop Command Shortcuts (or Aliases) Object Selection Methods Object Snaps Coordinate System Autodesk, the Autodesk logo,
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationGrips - Automatic Editing
Grips - Automatic Editing Sacramento City College Engineering Design Technology Grips - Automatic Editing 1 Objectives Use grips to do automatic editing with the STRETCH, COPY, MOVE, ROTATE, SCALE and
More informationUndo Button Clicking this tool will undo the last action. Clicking on this tool multiple times will undo all subsequent changes that were made.
SMS Featured Icons: Editor Window This document includes a brief description of the tools in the SMS Desktop Software Editor windows, as well as showing you the toolbar shortcuts to easily access these
More informationSOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
More informationDC2 File Format. 1. Header line 2. Entity line 3. Point line 4. String line
DC2 File Format The DesignCAD DC2 drawing file is an ASCII file, with the data present in character format. Each "record" in the file is actually a line in a text file. There are four types of records,
More informationSolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
More informationXPEL DAP SUPPORT. DAP Tool List & Overview DESCRIPTION ICON/TOOL (SHORTCUT)
Pointer (S) Left-click on individual entities to add them to the current selection (selected entities will turn red). If the entity selected is a member of a group, the entire group will be added to the
More informationFuselage and Sharks Tooth
Chapter 4 Glider Fuselage and Sharks Tooth A. Save as "FUSELAGE". Step 1. Open your FUSELAGE BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in FUSELAGE for the filename and press ENTER. B.
More informationThe Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is
The Department of Construction Management and Civil Engineering Technology CMCE-1110 Construction Drawings 1 Lecture Introduction to AutoCAD What is AutoCAD? The term CAD (Computer Aided Design /Drafting)
More informationExcerpt from "Inside CorelCAD" - Windows edition To purchase the full book, please go to
chapter 3 CAD Concepts 37 1. Start any drawing command, such as Line. : line Specify start point» (Move cursor.) 2. Right-click the coordinate field. Notice the short cut menu. 3. Choose Relative. (The
More informationCO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
More informationH Stab and V Stab. Chapter 6. Glider. A. Open and Save as "H STAB". Step 1. Open your STABILIZER BLANK file.
Chapter 6 Glider H Stab and V Stab A. Open and Save as "H STAB". Step 1. Open your STABILIZER BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in H STAB for the filename and press ENTER. B. Sketch
More informationObject Snap. Sacramento City College Engineering Design Technology. Object Snap 1
Object Snap Sacramento City College Engineering Design Technology Object Snap 1 Objectives Use OSNAP to create precision drawings Use object snap overrides for single point selections Set running object
More informationInput CAD Solid Model Assemblies - Split into separate Part Files. DXF, IGES WMF, EMF STL, VDA, Rhino Parasolid, ACIS
General NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Report Creator and Designer
More informationBasic MicroStation Training Outline
12:30 DAY 1 Equipment Review Workstation, monitor, keyboard File server, Plot server, STATE server Drive Assignments Shortcut Menu General overview of commands Explorer Managing Folders & Files MicroStation
More informationQuick Scene 5. Crash Scene Diagrams in 5 Minutes! The CAD Zone, Inc All rights reserved.
5 Crash Scene Diagrams in 5 Minutes! The CAD Zone, Inc. 2013 All rights reserved. 800 641 9077 www.cadzone.com Page 1 800 641 9077 www.cadzone.com Page 2 Welcome to! This manual introduces you to, a drawing
More informationMIMAKI ENGINEERING CO., LTD.
For Windows XP/Windows 2000 Cutting Application Software SimpleCut Operation Manual MIMAKI ENGINEERING CO., LTD. D201463 Contents Introduction 1 About this Manual 2 Chapter 1 Installation Procedure 3
More informationTutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
More informationGetting Started. In This Chapter
Getting Started In This Chapter 2 This chapter introduces concepts and procedures that help you get started with AutoCAD. You learn how to open, close, and manage your drawings. You also learn about the
More informationMET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
More informationSI-100 Digital Microscope. User Manual
SI-100 Digital Microscope User Manual Read this manual before use Keep for future reference Content 1 Introduction... 3 1.1 About The SI-100... 3 1.2 Advantage of SI-100... 3 1.3 Product Specification...
More informationVisual 2012 Help Index
Visual 2012 Help Index Absolute Coordinates 2.1 Cartesian Coordinates Aim 7.4.3 Place and Aim Luminaires 7.4.4 Reaiming Luminaires Align Cursor and Plane to Current View 9.6 Align to View Align Cursor
More informationUser Interface Revit s user interface is adaptive, changing based on your selections and views. options. Room Tag Split Elements
NU REVIT TUTORIAL Instructor: David Snell, AIA LEED AP BD+C Tutorial 1: 2016-01-25 Page 1 of 8 User Interface Revit s user interface is adaptive, changing based on your selections and views. Application
More informationPerform editing operations such as erase, move, and trim on the objects in a drawing.
Modifying Perform editing operations such as erase, move, and trim on the objects in a drawing. The most common of these tools are located on the Modify panel of the Home tab. Take a minute to look through
More informationPART I GravoStyle5-Laser Introduction
PART I GravoStyle5-Laser Introduction I. INTRO GravoStyle 5 Laser is designed is a component of GravoStyle5 for use with the Gravograph/New Hermes and other manufacturer Laser Engravers. Combined with
More informationCNC Programming Simplified. EZ-Turn / TurnMill Tutorial.
CNC Programming Simplified EZ-Turn / TurnMill Tutorial www.ezcam.com Copyright Notice This manual describes software that contains published and unpublished works of authorship proprietary to EZCAM Solutions,
More informationAcknowledgement INTRODUCTION
Submitted by: 1 Acknowledgement INTRODUCTION Computers are increasingly being used for doing engineering drawings and graphics work because computers allow the graphics designer or the draughtsman to change
More informationVersion 10 Addendum to the User s Manual
Version 10 Addendum to the User s Manual Introduction to Version 10 This latest release of the diagram program boasts improved productivity via the new user interface, real-time 3D, a new 3D rendering
More informationFixed problem with PointXYZ command's Z value changing to previous Y value.
DesignCAD 3D Max 19.1 Release Notes Mar. 20, 2009 DesignCAD 19.1 offers the following fixes and enhancements: The number of useable layers was increased from 1,000 to 2,000. Fixed problem with PointXYZ
More informationNURBS modeling for Windows. Training Manual Level 1
NURBS modeling for Windows Training Manual Level 1 Rhino Level 1 Training 2nd Ed.doc Robert McNeel & Associates 1997-2000 All Rights Reserved. Printed in U.S.A. Copyright by Robert McNeel & Associates.
More informationI. Getting started in ARCHLine.XP
I. Getting started in 1 Introduction 3 1. Introduction 1.1. Definition ARCHLine.XP is a Building Information Modeller, which supports the creation of planning- and implementation documentation, tender
More informationNAME ICON COMMAND SHORTCUT DESKTOP MOBILE DESCRIPTION Arc arc - Draw > Arc Draws any segment of a circle. - Inserts a camera object.
List of Tools Drawing Tools Arc arc - Draw > Arc Draws any segment of a circle. Array array - Draw > Grip Copies objects in either a rectangular or polar Array Context Menu mode. Box box - Draw > Box Draws
More informationTutorial 01 Quick Start Tutorial
Tutorial 01 Quick Start Tutorial Homogeneous single material slope No water pressure (dry) Circular slip surface search (Grid Search) Intro to multi scenario modeling Introduction Model This quick start
More informationRhinoceros NURBS modeling for Windows. Version 1.0 Training Manual Level 1
Rhinoceros NURBS modeling for Windows Version 1.0 Training Manual Level 1 rhinolevel 1.doc Robert McNeel & Associates 1997. All Rights Reserved. Printed in U.S.A. Copyright by Robert McNeel & Associates.
More information4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 3D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
More informationKeys for selecting tools
Keys for selecting tools Use these shortcuts in the Tools panel. In most cases, you can momentarily switch tools by holding down the keyboard shortcut for the tool. Selection tool V V Rotation tool W W
More informationFire Scene 6. Tip Sheet
Fire Scene 6 Tip Sheet Fire Scene 6 All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping,
More informationGEO 154 CARTOGRAPHY II- PLOTTING USING AUTOCAD- ASSIGMENT HELP
GEO 154 CARTOGRAPHY II- PLOTTING USING AUTOCAD- ASSIGMENT HELP DOCUMENT. For one to two reasons data may not be in a format that can be integrated into AutoCAD software, but coordinates may be separated
More informationBasic Modeling 1 Tekla Structures 12.0 Basic Training September 19, 2006
Tekla Structures 12.0 Basic Training September 19, 2006 Copyright 2006 Tekla Corporation Contents Contents 3 1 5 1.1 Start Tekla Structures 6 1.2 Create a New Model BasicModel1 7 1.3 Create Grids 10 1.4
More informationTMCH Report March February 2017
TMCH Report March 2013 - February 2017 Contents Contents 2 1 Trademark Clearinghouse global reporting 3 1.1 Number of jurisdictions for which a trademark record has been submitted for 3 2 Trademark Clearinghouse
More informationSkateboard. Hanger. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Fig. 2
Chapter 3 Skateboard Hanger A. Sketch1 Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1.
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a template. 2. Understand the AutoCAD Window. 3. Understand the use of the function keys. 4. Select commands using the Pull-down
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationAfter completing this lesson, you will be able to:
LEARNING OBJECTIVES After completing this lesson, you will be able to: 1. Create a template. 2. Understand the AutoCAD Window. 3. Understand the use of the function keys. 4. Select commands using the Pull-down
More informationto display both cabinets. You screen should now appear as follows:
Technical Support Bulletin: AllenCAD Tutorial Last Updated November 12, 2005 Abstract: This tutorial demonstrates most of the features of AllenCAD necessary to design or modify a countertop using the program.
More informationVersion 2011 R1 - Router
GENERAL NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Convert Raster to Vector
More information2D & 3D CAD SOFTWARE USER MANUAL. AutoQ3D CAD for ipad & iphone
Type to enter text 2D & 3D CAD SOFTWARE USER MANUAL AutoQ3D CAD for ipad & iphone AUTOQ3D TEAM FIRST EDITION AutoQ3D CAD for ipad & iphone 2D / 3D cad software user manual 2015 by AutoQ3D Team. All rights
More informationThe Rectangular Problem
C h a p t e r 2 The Rectangular Problem In this chapter, you will cover the following to World Class standards: The tools for simple 2D Computer Aided Drafting (CAD) The Command Line and the Tray The Line
More informationGoogle LayOut 2 Help. Contents
Contents Contents... 1 Welcome to LayOut... 9 What's New in this Release?... 10 Learning LayOut... 12 Technical Support... 14 Welcome to the LayOut Getting Started Guide... 15 Introduction to the LayOut
More informationSkateboard. Hanger. in the Feature Manager and click Sketch. (S) on the Sketch. Line
Chapter 3 Skateboard Hanger A. Sketch 1. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane from the Content toolbar, Fig. 1. in the Feature Manager and click Sketch Step
More informationSimplyCam V3. Documentation
SimplyCam V3. Documentation Introduction to SimplyCam SimplyCam is a simple Cad/Cam system that creates toolpaths (G-Code). The geometric part can be created internally, with the available tools or imported
More informationDelta Dart. Propeller. in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. on the Sketch toolbar.
Chapter 8 Delta Dart Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch from the Content toolbar, Fig.
More informationRevit Architecture 2015 Basics
Revit Architecture 2015 Basics From the Ground Up Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationReset Cursor Tool Clicking on the Reset Cursor tool will clear all map and tool selections and allow tooltips to be displayed.
SMS Featured Icons: Mapping Toolbar This document includes a brief description of some of the most commonly used tools in the SMS Desktop Software map window toolbar as well as shows you the toolbar shortcuts
More informationS206E Lecture 3, 5/15/2017, Rhino 2D drawing an overview
Copyright 2017, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2017 Rhino 2D drawing is very much the same as it is developed in AutoCAD. There are a lot of similarities in interface and in executing
More informationUser Guide. for. JewelCAD Professional Version 2.0
User Guide Page 1 of 121 User Guide for JewelCAD Professional Version 2.0-1 - User Guide Page 2 of 121 Table of Content 1. Introduction... 7 1.1. Purpose of this document... 7 2. Launch JewelCAD Professional
More informationQuick Crash Scene Tutorial
Quick Crash Scene Tutorial With Crash Zone or Crime Zone, even new users can create a quick crash scene diagram in less than 10 minutes! In this tutorial we ll show how to use Crash Zone s unique features
More informationPress the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
More informationRhinoceros NURBS modeling for Windows. Training Manual Level 1
Rhinoceros NURBS modeling for Windows Training Manual Level 1 R30TML1-08-2005 Rhinoceros Level 1 Training Manual v3.0 Robert McNeel & Associates 2005 All Rights Reserved. Printed in U.S.A. Copyright by
More informationINKSCAPE BASICS. 125 S. Prospect Avenue, Elmhurst, IL (630) elmhurstpubliclibrary.org. Create, Make, and Build
INKSCAPE BASICS Inkscape is a free, open-source vector graphics editor. It can be used to create or edit vector graphics like illustrations, diagrams, line arts, charts, logos and more. Inkscape uses Scalable
More informationDWG/DXF Export. Some attribute values in blocks weren't exporting correctly.
DesignCAD 3D Max 20.1 Release Notes Nov. 9, 2010 DesignCAD 3D Max 20.1 introduces the following fixes and changes: DWG/DXF Export. Sometimes arcs and elliptical arcs, when exported to dwg or dxf format,
More informationTHE EASTMAN Easicut v2.1
THE EASTMAN Easicut v2.1 User's Manual This manual must be used in conjunction with the M9000 Machine Instruction and Service manual, Form #E-509-Instructions. 779 Washington St., Buffalo, N.Y. 14203-1396
More informationPTS/Data Highway Interface Software User s Manual
PTS/Data Highway Interface Software User s Manual February 1997 MAN527 Contents 1. Introduction 1 2. Program Functions 2 3. Programming 3 3.1 General 3 3.2 Register Size 3 3.3 Files and Messages 3 3.4
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationAppendix B Import (CAD Transfer) Mode Keyboard Shortcuts
Import (CAD Transfer) Mode Keyboard Shortcuts Mode-Changing Keys E F H W V P Switch to Edit mode (press twice for Entry mode) Switch to Profile View mode Switch to Highway mode (if available) Switch to
More informationCHAPTER 4 HP-GL/2 GRAPHICS LANGUAGE
CHAPTER 4 HP-GL/2 GRAPHICS LANGUAGE CHAPTER 4 HP-GL/2-1 CONTENTS 1. COMMAND LIST... 4 2. INTRODUCTION... 6 3. TERMINOLOGY... 7 3.1. Picture Frame... 7 3.2. Anchor Point... 7 3.3. Graphics Window... 7 3.4.
More informationWhat s new in General CADD Pro v11
What s new in General CADD Pro v11 Updated: 4/01/2013 1. DWG 2013 file format fully supported Load and save Auto CAD 2013 DWG files 2. Hi-Def Image Drag for Component Place, Bitmap Images, and Edit Commands
More informationAGi32 version 2.3. Keyboard Shortcuts (cntd.) General. Function Keys. Mouse Functions. Keyboard Shortcuts F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
Function Keys Help Viewpoints - Quick Add Snap To Arc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Mouse Functions Left click: Select L R Keyboard Shortcuts Left Arrow Right Arrow Up Arrow Down Arrow Shift+
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationLuana Valentini InternetGIS course
Google SketchUp - A brief introduction - Luana Valentini InternetGIS course - 2011 Create 3D models and share them with the world Google SketchUp is software that allows you to create 3D models of anything
More informationVectorworks Essential Tutorial Manual by Jonathan Pickup. Sample
Vectorworks Essential Tutorial Manual by Jonathan Pickup Table of Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 Real World Sizes... iv 0.3 New Ways of Drawing... v 1.0 Introduction
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationRoland AC Adapter Compatibility Guide
Roland AC Adapter Compatibility Guide A-30/33/37 ACA-120 A-300PRO A-500PRO A-500S A-800PRO AC-2/3 PSA-120 AC-33 PSB-12U X AD-3/8 PSA-120 AD-5 ACF-120 AF-70 BRC-120 X AR-100/200 ACI-120 X ASC-10 PSA-120
More informationModeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
More informationRoof Designer USER S GUIDE
Roof Designer USER S GUIDE Roof Designer-1 Roof Designer-2 Roof Designer The Roof Designer makes it easy to define and place custom roofs in your project. You can start the Roof Designer independently,
More informationAirplane. Chapter 21. Mastercam A. Create Rectangle. B. Save As AIRPLANE. C. Set Grid and Snap.2. Mastercam 2017 Airplane Page 21-1
Mastercam 2017 Chapter 21 A. Create Rectangle. Airplane Step 1. If necessary start a new Mastercam file, click New on the Quick Access Toolbar QAT (Ctrl-N). Step 2. On the Wireframe tab click Rectangle.
More informationFor Windows VISTA /Windows XP Cutting Application Software Simple Studio. Operation Manual MIMAKI ENGINEERING CO., LTD. D
For Windows VISTA /Windows XP Cutting Application Software Simple Studio Operation Manual MIMAKI ENGINEERING CO., LTD. D201923-11 Contents Introduction 1 About this Manual 3 Chapter 1 Installation Procedure
More informationLaser Machine User Manual:
Laser Machine User Manual: OPERATOR ( EasyCut / LaserCut version 5.3 ) v1.0 CTR Laser Machine Operator Manual ( EasyCut version 5.3 ) ~ version 1.0 1 CONTENTS Section 1: Tutorials...5 1.1. How to Cut with
More informationBoA Tools Page 1 / 31
BoA Tools Page 1 / 31 Standard tools Overview 2 Work pane 3 3D-2D file Main palette 6 Layout Main Palette 9 Navigation tools 11 Workplane Palette 14 Cursor Palette 21 Numeric control 24 Selection by Criteria
More informationRandy H. Shih. Jack Zecher PUBLICATIONS
Randy H. Shih Jack Zecher PUBLICATIONS WWW.SDCACAD.COM AutoCAD LT 2000 MultiMedia Tutorial 1-1 Lesson 1 Geometric Construction Basics! " # 1-2 AutoCAD LT 2000 MultiMedia Tutorial Introduction Learning
More informationCad Zone Point Cloud. Intro
Cad Zone Point Cloud Intro What is a point cloud? It s potentially millions of points captured at a scene using a laser scanner or a photogrammetric system. The point cloud gives you a complete and accurate
More informationUser Manual Version 1.1 January 2015
User Manual Version 1.1 January 2015 - 2 / 112 - V1.1 Variegator... 7 Variegator Features... 7 1. Variable elements... 7 2. Static elements... 7 3. Element Manipulation... 7 4. Document Formats... 7 5.
More informationA Comprehensive Introduction to SolidWorks 2011
A Comprehensive Introduction to SolidWorks 2011 Godfrey Onwubolu, Ph.D. SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Chapter 2 Geometric Construction Tools Objectives: When
More informationInventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
More informationRhino Interface. Menus Command History Command Prompt. Toolbars. Viewport Title. Viewports. Common Shortcuts. Object Snaps.
Rhino Interface Menus Command History Command Prompt Toolbars Viewport Title LMB: activate viewport without losing selection Double Click: maximise viewport RMB: show viewport options: wireframe, shaded,
More information