Note Those who exchanged the pad for a new pad or are using MPC1000 BK-N need to adjust pad sensitivity first.

Size: px
Start display at page:

Download "Note Those who exchanged the pad for a new pad or are using MPC1000 BK-N need to adjust pad sensitivity first."

Transcription

1 This manual is written only about the function added by JJ OS. Please refer to the manual of AKAI for the basic function of MPC. When you change OS, please switch on a power supply, pressing the ERASE button first. Please press the ERASE button until a main screen is displayed. If this operation is not performed, MPC may freeze or it may crash. When the reaction of a DATA wheel is slow or cannot change the value of one step, please change the set of the "Data Wheel Type" field of OTHER. Usually, MPC in which Ver2.12 or less AKAI OS was installed selects 1. MPC in which Ver2.13 was installed selects 2. If OS is changed, this set will return to default setting"2". Note The contrast of LCD should turn a DATA wheel, pressing the [STOP] key. Note If a DATA wheel is turned pressing [SHIFT] or the [TAP TEMPO] key, change of a value will increase 10 times. Note Those who exchanged the pad for a new pad or are using MPC1000 BK-N need to adjust pad sensitivity first. Note Please push the [MAIN] key before turning off the power. Various data is memorized by the internal Flash memory by pressing a [MAIN] key. Main Screen... 1 Audio Track... 2 Auto Chromatic Assignment... 5 Grid Edit (Drum)... 6 Grid Edit (Midi) Grid Edit (Audio) Global Program Edit Real Time Pitch Shift Midi/Sync (MMC - MTC - CLOCK) Midi Program Change Name Edit... 29

2 Adjustment of Pad Sensitivity Selecting a Tempo Source Simult Pad Simult Sequence Save / Load / Auto Load / Format Q-Link Song Track Mute Trim Other Voice Monitor Splash Screen MUTE Customizable Click/Metronome Sounds Play mode change of Next sequence USB connection Tap Tempo Indicator of a main screen

3 MAIN SCREEN - 1 -

4 - 2 - AUDIO TRACK Tracks are audio tracks. A sample is assign to a track and can play back. If you press the [REC]+[PLAY] or [PLAY START] key of can record. Track main screens. Track 1-56 main screens. A main screen when the [SHIFT] key is pressed Playing back a Sample Please move cursor to the sample field. Please select a sample to playback by a data wheel. Selection of a sample can also be select from the window of "Sample list". Playback of a sample will be begun if [PLAY] or the [PLAY START] key is pressed. When the [PLAY] key is pressed, playback can be begun from the present location. If the [STOP] key is pressed, playback will stop. If the [WINDOW] key is pressed when cursor is in the sample field, the window of "Sample list" will open. Playback is begun by the [PLAY START] key. [STOP] key was pressed in the location of

5 - 3 - If the [PLAY] key is pressed, playback will be begun from Audition of samples An audition of the sample chosen if arbitrary pads are pressing is possible. Moreover, even if it chooses a sample by a DATA wheel or or cursor key, pressing a arbitrary pad, audition is Possible. When cursor is a FX field, press the [WINDOW] key, the "EFFECTT" window will open. Preparing the recording Please move cursor to the track field and press the [WINDOW] key, the window of "Record setups" will open, Input: Select the recording sourec. Mode: Select the recording mode. (STEREO or MONO) Name: Sample name. (Default is "Take ") Monitor: Monitor ON/OFF under recording. MONO: Time which can be recorded by a monophonic recording. STEREO: Time which can be recorded by a stereo recording.

6 - 4 - Starting the recording When the [REC]+[PLAY START] key is pressed, recording is started from (00:00:00:00). In [REC]+[PLAY], recording is started from the present location. In this case, silence is recorded from to the present location. In the case of the above figure, recording is started from the location of , and silence is recorded to to Notes When the loop of a sequence is ON, recording is automatically stopped at the end of a sequence. When a loop is OFF, the recording will continue until you press the [STOP] key. And the number of the bar when you actually pressed the [STOP] key will be set as the new length for the sequence. [OVER DUB] key does not work. Moreover, it cannot go to other screens during recording. The program has the parameter of Q-Link. There is no program in an audio track. Therefore, Q-Link does not work in an audio track. Audio track is can not convert in song mode.

7 - 5 - AUTO CHROMATIC ASSIGNMENT Samples can now be automatically assigned chromatic scale to the pads. Pads A01-D16 correspond to the MIDI note number [35-98] on a MIDI keyboard. [MODE]+PAD7 =>F1(SAMPLE) Assign the sample you wish to chromatically assign to the selected pad. Please move cursor to the "Tune" field and press the [WINDOW] key. If F5 (AUTO) key is pressed, the window of "Auto Chromatic Assign" will open. Source: Choose a sample to make into a chromatic scale. Original key: The note (pad) which reproduces the sample chosen in the Source field in an original pitch is chosen. New PGM name: You can enter a new name for the Chromatic program to be created. If F5 (DO IT) key is pressed, a chromatic scale will be automatically assigned to each pad (note). In the case of the above figure, it is as follows.

8 - 6 - GRID EDIT (DRUM) As fundamental specification, if OVER DUB is not ON, execution of "INSERT, DELETE, PASTE, EDIT, MOVE" cannot be performed. Moreover, these function keys are not displayed, either. [ F1 ] Move cursor to Track filed. [ F2 ] Q-LINK Real time event edit mode. [ F3 ] 16PAD display mode. [ F5 ] Mute sound this track. [ F6 ] Solo play this track. <Explanation in OVER DUB = OFF> GRID EDIT (6PAD mode) [MODE]+PAD15 Screen Move of vertical cursor is a DATA wheel or or cursor key. Move of horizontal cursor is or cursor key. Cursor move to each field. If the [SHIFT] key is held and the cursor key is pressed, cursor will move to the PAD field. If the [SHIFT] key is held and the cursor key is pressed, cursor will move to the Sequence field. To return to event field, please press or cursor key. Move of bar can be performed if the < BAR > key is pressed. Move quickly by a DATA wheel, holding the < BAR > key. Cursor is moved to the next event or a back event by a [SHIFT]+ <BAR> key. Arbitrary PAD of 1-16 can be chosen. Please hit a pad in the pad field, or turn a DATA wheel, and choose a pad. Notes It is only a track 1-8 that set of 6PAD is memorized. Set of track 8 is set as default up to a track ON/OFF of a loop is [SHIFT]+F6 (LOO) key.

9 - 7 - If F3 (16PAD) key is pressed, it will become 16PAD mode. 16PAD mode If the SHIFT+ [TAP TEMPO] key is pressed, it will become the mode of timing correction. T.C. MODE To return to the original screen, [TAP TEMPO] please press the key. If F4 (PROGRAM) key is pressed, the program name chosen now and the sample name assigned to the pad will be displayed on the upper field. If cursor is moved to the top field by a [SHIFT]+ cursor key, the sample and program assigned to the pad can be changed. If the [WINDOW] key is pressed in the sample field The window of "Sample list" opens. The audition of a sample is possible if arbitrary pads are pressed. Moreover, even if it chooses a sample by a DATA wheel or or cursor key, pressing a arbitrary pad, audition is Possible.

10 - 8 - When cursor is within the event field, if the [WINDOW] key is pressed, a "GRID Options" window will open. Step sound: If you select ON, the event of the cursor position is sounded during cursor move. Auto step increment: If you select YES, After hitting a pad and recording an event, cursor move to the right automatically. If the [WINDOW] key is pressed when cursor is in the sequence field, the window of a sequence will open. If the [WINDOW] key is pressed when cursor is in the tempo field, the window of "Tempo Change" will open. Q-Link: 1 = Change the tempo by Q1 slider. Q-Link: 2 = Change the tempo by Q2 slider. Q-Link Range(L,H): The range of change is set up. If the [WINDOW] key is pressed when cursor is in the track field, the window of a track will open.

11 - 9 - If F1 (TRACK) key is pressed when cursor is in the track field, the name of a track will be displayed on the upper field. Tips Cursor will return to the event field at the same time it released F1 (TRACK) key, when a track is chosen by a DATA wheel, holding F1 (TRACK) key. <Explanation in OVER DUB = ON > The following is explanation when LED of OVER DUB is ON. Record of an event OVER DUB is ON(the LED is lit) Please move cursor to the location which records an event and hit a pad. When you record an event on real time, please press the [REC]+[PLAY START] key. An event will be deleted if F4 (DELETE) key is pressed. The event on the crossing of horizontal cursor and vertical cursor is deleted. Selection of region Please select a horizontal region by or cursor key, holding the [TAP TEMPO] key. Please maintain the [TAP TEMPO] key and select a vertical region by or cursor key. (It is possible for a [TAP TEMPO]+DATA wheel to also select a horizontal region.) The event within the region with which horizontal region and vertical region have overlapped is the target of edit. Please execute a command by pressing F3 (COPY), F4 (DELETE), and F6 (MOVE) key after selecting the region. Unless OVER DUB is set to ON(the LED is lit), DELETE is not displayed on F4. Execution of MOVE cannot be performed unless OVER DUB is set to ON(the LED is lit). PASTE Please move cursor to the location which wants to perform paste. Paste will be performed if [SHIFT]+F5 (PASTE) key is pressed. Unless OVER DUB is set to ON(the LED is lit), PASTE is not displayed on F5.

12 Edit of event OVER DUB is ON(the LED is lit) Parameter of the event in the location of cross cursor is displayed on the upper parameter field. For moving cursor to the upper parameter field, please press the F5(EDIT) key. Please change the value of a parameter. If F6 (PLAY) key is pressed, the audition of the edited event is possible. To return cursor to event field, please press cursor key or F5(EDIT) key. In addition, if the value of a parameter is changed holding F5 (EDIT) key, cursor will return to the event field at the same time it released F5 (EDIT) key. T.C. mode If the SHIFT+ [TAP TEMPO] key is pressed, it will become a screen in timing correction mode. To return to the original screen, [TAP TEMPO] please press the key. Cursor is moved to the upper field by a SHIFT+ cursor key, and a value can be changed. The value of "Swing" and "Shift" can be performed with a Q-LINK slider. Please set Q-Link as reference for the following figure. If SHIFT+F1 (T. C.) key is pressed, a "Timing Correct" window will open.

13 Please press the F3(Q-LINK) key. Please set Q-Link Q-REAL <<Q-LINK REAL TIME EVENT EDIT MODE>> <Explanation in OVER DUB=ON > If F2 (Q-REAL) key is pressed, it will become the mode which edits the REAL TIME event of Q-Link. Since cursor will be displayed on the upper field if the cursor key is pressed, please choose a pad number and a parameter to edit or record. If the cursor key is pressed, cursor disappears from the upper field and a marker can be moved by a DATA wheel. Record of an event is performed with Q1 and Q2 slider. OVER DUB is ON(the LED is lit) Please move a marker to the location which records edit or an event, and edit or record an event by a slider. If an event is recorded, the value of the event will be displayed on the upper EVENT field. Record of an event is also recordable on real time, if [REC], [OVER DUB]+[PLAY], or the [PLAY START] key is used. Even if it records by [REC]+[PLAY] or [PLAY START], only the parameter event of the pad number chosen now is erased. NOTE event is not erased.

14 [AUTO INSERT] The procedure which records two or more events at one time. Please select the region which records an event by a [TAP TEMPO] + DATA wheel. Next, please press the F5(INSERT) key. A default value is inserted. Please set the value of start with Q1 slider. Please set the value of end with Q2 slider. The event from the value of a start to the value of an end is inserted for every clock set at the interval. Selection of an interval. F2(1/8) = 48clock, F3(1/16) = 24clock, F4(1/32) = 12clock. Insertion will be completed if F6 (ENTER) key is pressed. Notes: LOW and HIGT which were set on MODE+PAD1 (SLIDER) mode do not work on grid( Q-REAL) mode. Moreover, AFTER does not work, either.

15 GRID EDIT (MIDI) As fundamental specification, if OVER DUB is not ON, execution of "INSERT, DELETE, PASTE, EDIT, MOVE" cannot be performed. Moreover, these function keys are not displayed, either. [OVER DUB=OFF] If the cursor key is pressed, holding a [SHIFT] key, cursor will be displayed on the upper field. If set in the upper field finishes, please press the cursor key. or cursor key can go up and down the display range of NOTE. If F3(ALL) key is pressed, all the notes (0-127) will be displayed. Move of bar can be performed if the < BAR > key is pressed. Move quickly by a DATA wheel, holding the < BAR > key. If the F4 (PC) key is pressed, a program change will be displayed on the upper field. PC:OFF:Pgm:xxxxxxx = Internal sound program name PC:Seq:nnn:xxxxxxx = MIDI Seq. event program name PC:nnn:xxxxxxx = Track parmeter program name ON/OFF of a loop is [SHIFT]+F6 (LOO) key. [OVER DUB=OFF or ON] It is SHIFT+F3 (ZOOM OUT) and is zoom out. It is SHIFT+F4(ZOOM IN) and is zoom in.

16 [OVER DUB=ON] OVER DUB is ON(the LED is lit) When a marker is on an event, the parameter of the event is displayed on the upper field. When two or more events are in the same location, please choose an event by a or cursor key. When Q1 [AFTER] is ON (the LED is lit), the value of duration can be set with a slider. When Q2 [AFTER] is ON (the LED is lit), the value of velocity can be set with a slider. If F5 (EDIT) key is pressed, it will become the edit mode of a parameter. Please move cursor to the parameter to edit, and please set a value by a DATA wheel. Edit mode will be canceled, if F5(EDIT) key is pressed once again or the cursor key is pressed. Record of events OVER DUB is ON(the LED is lit) Please turn ON(the LED is lit) Q1 [AFTER] and set the value of duration with a slider. Please turn ON(the LED is lit) Q2 [AFTER] and set the value of velocity with a slider. If a keyboard or a pad is hit, the event of the value set by Q1 and Q2 will be recorded on the position of a marker. When the [AFTER] key is OFF, an event is recorded as AS PLAYED.

17 <<PITCH BEND, CONTROL CHANGE, POLY PRESS, CHANNEL PRESS, EDIT MODE>> If F2 (CONTROL) key is pressed, it will become the edit mode of PITCH BEND, CONTROL CHANGE, POLY PRESS, and CHANNEL PRESS. The parameter field will be highlight if the cursor key is pressed. Please choose the parameter to edit by a DATA wheel. Please press the cursor key after pressing the cursor key, if the parameter to edit is chosen. OVER DUB is ON(the LED is lit) Please move a marker to the location which records edit or an event, and edit or record an event by a slider. If an event is recorded, the value of the event will be displayed on the upper EVENT field. Record of an event is also recordable on real time, if [REC], [OVER DUB]+[PLAY], or the [PLAY START] key is used. Even if it records by [REC]+[PLAY] or [PLAY START], only the parameter event of the pad number chosen now is erased. NOTE event is not erased. In the case of the upper picture, the event of new PITCH BEND is recorded, erasing only the event of PITCH BEND of a track 3. <<AUTO INSERT>> The procedure which records two or more events at one time. Please select the region which records an event by a [TAP TEMPO] + DATA wheel. Next, please press the F5(INSERT) key. A default value is inserted. Please set the value of start with Q1 slider. Please set the value of end with Q2 slider.

18 The event from the value of a start to the value of an end is inserted for every clock set at the interval. Selection of an interval. F2(1/8) = 48clock, F3(1/16) = 24clock, F4(1/32) = 12clock. Insertion will be completed if F6 (ENTER) key is pressed.

19 GRID EDIT (AUDIO) The screen of TRACK57-64 Playing back a Sample Please move cursor to the sample field. Please select a sample to playback by a data wheel. Playback of a sample will be begun if [PLAY] or the [PLAY START] key is pressed. When the [PLAY] key is pressed, playback can be begun from the present location. If the [STOP] key is pressed, playback will stop. If the cursor key is pressed, cursor will move to the sample field. It returns to the waveform field by a cursor key. It is SHIFT+F3(ZOOM OUT) and is zoom out. It is SHIFT+F4(ZOOM IN) and is zoom in. A waveform will be expanded and displayed if [SHIFT]+F5 (RANGE-) or F6 (RANGE+) key is pressed. (x1,x2,x4,x8,,,x128) The present magnifying power is displayed under a track number. When cursor is in the track field, if the [WINDOW] key is pressed, the window of a track will open. When cursor is in the waveform field, if the [WINDOW] key is pressed, the window of "GRID Options" will open. When set to ON, it will move sounding the sound on cursor, while moving the cursor in the waveform field by the DATA wheel.

20 Recording If the F3(REC SETUPS) key is pressed, the window of "Record setups" will open. Input: Select the recording sourec. Mode: Select the recording mode. (STEREO or MONO) Name: Sample name. (Default is "Take ") Monitor: Monitor ON/OFF during recording. MONO: Time which can be recorded by a monophonic recording. STEREO: Time which can be recorded by a stereo recording. When the [REC]+[PLAY START] key is pressed, recording is started from (00:00:00:00) In [REC]+[PLAY], recording is started from the present location. In this case, silence is recorded from to the present location. Notes When the loop of a sequence is ON, recording is automatically stopped at the end of a sequence. When a loop is OFF, the recording will continue until you press the [STOP] key. And the number of the bar when you actually pressed the [STOP] key will be set as the new length for the sequence. [OVER DUB] key does not work. Moreover, it cannot go to other screens during recording. Fade-in/out If the F2(FADE) key is pressed, [FADE] will become a highlight display and will become the editing mode of fade-in/out. FADE mode will be canceled if F2 (FADE) key is pressed once again.

21 FADE IN Please select the area which carries out fade-in by a DATA wheel, holding F3 (FADE IN) key. If the [PLAY] key is pressed, the audition of fade-in can be performed. FADE OUT Please select the area which carries out fade-out by a DATA wheel, holding F4(FADE OUT) key. If the [PLAY] key is pressed, the audition of fade-out can be performed. Delete of fade-in/out The data of FADE IN/OUT can be deleted by a DATA wheel, holding F5 (DELETE) key. If the F6(FIX) key is pressed, the window of "Fade in/out fix" will open. If F5 (DO IT) key is pressed, the volume of a sample will be changed according to fade data. The changed data of a sample cannot be returned. Fade data is recorded on the track of a sequence as MIDI EXPRESSON. INSERT DELETE is possible on a STEP EDIT screen. Notes An audio track does not have functions, such as copy, paste, and move. The program has the parameter of Q-Link. There is no program in an audio track. Therefore, Q-Link does not work in an audio track.

22 GLOBAL PROGRAM EDIT On the screen of [MODE]+PAD11, a setup of PROGRAM, MXER, and EFFECT can be carried out collectively. Cursor move to Pgm field please press the [SHIFT]+ cursor key. Please press the cursor key, for returning from the Pgm field to the PAD field and the parameter field. Cursor movement of the parameter field please press the or cursor key. If a DATA wheel is turned holding the or cursor key, it can move quickly. Press the F6[WHOLE] key will display a pad number on F4 and F5 key. Holding F4 key, please turn a DATA wheel and choose the pad number used as the starting point of the range. Holding F5 key, please turn a DATA wheel and choose the pad number used as the end point of the range. When cursor is a PAD field, press the [WINDOW] key, the "Velocity Layer" window will open. Press the F2[WHOLE] key will display a pad number on F3 and F4 key. Holding F3 key, please turn a DATA wheel and choose the pad number used as the starting point of the range. Holding F4 key, please turn a DATA wheel and choose the pad number used as the end point of the range.

23 When cursor is a NOTE field, press the [WINDOW] key, the "Pad to Note Assign" window will open. Press the F3[35-98] key will assign of NOTE in order to A01-D16 of a pad. When cursor is a SAMPLE field, press the [WINDOW] key, the "Sample list" window will open. An audition of the sample chosen if arbitrary pads are pressing is possible. Moreover, even if it chooses a sample by a DATA wheel or cursor key, pressing a arbitrary pad, audition is Possible. Auto Chromatic Assign When cursor is a TUNE field, press the [WINDOW] key, the "Auto Chromatic Assign" window will open. Press F5[DO IT] key.

24 F2[FILTER] When cursor is a ATK,DCY,MODE field, press the [WINDOW] key, the "Amp Envelope" window will open. When cursor is a FLT1-RES2 field, press the [WINDOW] key, the "Filter Envelope" window will open. F3[LFO] F4[MUTE] A setup of Mute group and Simult pad. F5[OUT] OUT can choose ST L-R. Press the [WINDOW] key.

25 Press the [WINDOW] key

26 REAL TIME PITCH SHIFT A pitch shift can be performed on real time. (+ - 1 octave ) [MODE]+PAD8 Screen Press F5[INPUT] key. Please make it "Input thru ON" and "Pitch shift ON" on the screen of INPUT. A pitch shift is possible on real time to the signal from a RECORD IN terminal and a DIGITAL IN terminal. (+ - 1 octave ) If a [REC] key is pressed, the sound by which the pitch shift was carried out can be recorded. [STOP] or if the [REC] key is pressed once again, recording stops. When recording is stopped, the contents of recording are kept in the memory of MPC by the file name of "Sample01" (default name). It can carry out 0 to +1 octave variable by Q1 slider. (+1 to +12 1= half tone ) It can carry out 0 to -1 octave variable by Q2 slider. (-1 to -12 1= half tone ) Range = The variable range of a slider is changed. Pitch = The present pitch. When cursor is a Pitch shift field, press the [WINDOW] key, the "Record name" window will open. When needed, the sample name which it has automatically can be changed. Notes 1. Q-link sliders cannot be used. 2. It can be used only on an Input Thru screen. 3. It does not work on other screens. 4. The play of a sequence is not made when pitch shift is ON. (Since the burden of CPU is heavy). <<<when there is no password.>>> It stops being able to carry out variable of the pitch 5 minutes after power on.

27 MMC - MTC - CLOCK MMC (MIDI Machine Control) The start of other devices and a stop are performed by remote control. Sync with the MPC as the master A press on START, PLAY, and the STOP key will transmit MMC START, MMC PLAY, and MMC STOP, respectively. A press on the STEP/BAR key will transmit the time information(mmc LOCATE) on the current position from the start of a sequencer. Example of a setting [MODE]+PAD9 =>F2(SYNC) Screen Connect the MIDI OUT of the MPC to MIDI IN of the external MIDI device using a MIDI cable. Sync with the MPC as the slave Received of MMC START, MMC PLAY, and MMC STOP will carry out the same operation as the key of START, PLAY, and STOP having been pressed. Received of time information (MMC LOCATE) will locate a sequencer in the position. If MMC PLAY is received, regardless of the play position by the side of a master, a play will be started from a current position. Notes Although it seems to synchronize since a master and a slave will start a play almost simultaneous if a start and a play are sent, the synchronized signal is not necessarily sent. Example of a setting Connect the MIDI IN of the MPC to MIDI OUT of the external MIDI device using a MIDI cable. Send MPC Control Play Play Start Stop <Step>, <<Bar>> MMC Command sent MMC Deferred Play MMC Start MMC Stop MMC Locate Receive MMC Command sent MMC Deferred Play MMC Start MMC Stop MMC Locate MMC Record MMC Pause MPC equivalent Play Play Start Stop Locate Record Stop

28 MTC (MIDI Time Code) It uses, when synchronizing with a hard disk recorder, the recorder of a video camera and a tape base, etc. Sync with the MPC as the master The time information (time second frame) currently played during a play is transmitted continuously. Example of a setting Connect the MIDI OUT of the MPC to MIDI IN of the external MIDI device using a MIDI cable. Sync with the MPC as the slave Received of MTC will play a sequencer synchronizing with the time. MTC synchronizes with the time after a sequencer starts. If a MTC signal stops, a sequencer will also stop. Example of a setting Connect the MIDI IN of the MPC to MIDI OUT of the external MIDI device using a MIDI cable. Setting of start time When cursor is a Time field, press the [WINDOW] key, the "Start Time" window will open. Start time: Frame rate: If the time set up here is received, a sequencer will start. When you use MPC as a master, please adjust with the frame rate by the side of a slave. When using MPC as a slave, it is not necessary to set up. Notes By the time a slave device synchronizes with MTC, the time for several seconds will be needed. Therefore, in order to make it synchronize correctly using MTC, we recommend you to make the blank like one bar beforehand before a performance start.

29 MIDI CLOCK It synchronizes with the clock of a sequencer. MIDI CLOCK will also change the tempo by the side of a slave, if the tempo by the side of a master is changed. Each other is a MIDI sequencer. It uses, when it seems that changes the tempo by the side of a master, and also wants the slave side to follow it. Sync with the MPC as the master A press on START, PLAY, and the STOP key will transmit each MIDI code. Then, adjusting to tempo, the MIDI CLOCK code is transmitted. If tempo is made quick, the interval of a clock will become short, and a clock interval will become long if it is made late. Example of a setting Connect the MIDI OUT of the MPC to MIDI IN of the external MIDI device using a MIDI cable. Sync with the MPC as the slave Received of START will wait to set the play position of a sequence to , and for MIDI CLOCK to come. Received of PLAY will wait for MIDI CLOCK to come. Then if MIDI CLOCK is received, it will play synchronizing with the timing of the clock. In this case, regardless of the play position by the side of a master, it plays from a current position. Example MASTER Now: SLAVE Now: When a master plays in this state. MASTER is plays from Slave is plays from For making the slave side into the same play position as a master, it is STEP/BAR. A key is pressed and the code SONG POSITION POINTER of MIDI is sent. A master and a slave become the same play position by sending this code. Example of a setting Connect the MIDI IN of the MPC to MIDI OUT of the external MIDI device using a MIDI cable. Tips: The example of a setting in case MPC is in a side and there is apparatus of a master in the distance SYNC OUT MMC: ON SYNC IN MMC: OFF SYNC IN MODE: MIDI TIM CODE Connect the MIDI OUT of the MPC to MIDI IN of the device which becomes a master using a MIDI cable. Connect the MIDI IN of the MPC to MIDI OUT of the device which becomes a master using a MIDI cable. Setting of master device 1. It sets up receive MMC. 2. It sets up transmit MIDI TIM CODE. If the play key is pressed by the MPC side, the master side will carry out a play start and will send MIDI TIM CODE. MPC1000 is played synchronizing with it. When only synchronizing and making it play, it is not necessary to use MMC. Notes Please use MIDI CLOCK, when the master and slave side is in the neighborhood and wants to make it only synchronize. Please use MTC, when the device to connect supports only MTC.

30 MIDI PROGRAM CHANGE There are the two methods of transmitting a program change. 1. It inputs on a STEP EDIT screen as a sequence event. In this case, it will be transmitted if a sequence is played. 2. It inputs on a main screen as a parameter of a track. In this case, it is transmitted when the [PLAY START] key is pressed. A program change is not transmitted when PC field is "OFF." Even if it plays a sequence, the program change currently recorded as a sequence event is not transmitted, either. When PC field is "Seq", When playing the sequence, program change which is inputted as the sequence event is transmitted. The number on the right side of PC field is Program Change number. The number will be displayed if a program change is within 384Tick (1 Bar) of the beginning of a sequence. When it is not found within 384Tick (1 Bar), "---" displayed. The number as a parameter of a track [PLAY START] It will be transmitted if a key is pressed. Even if it plays a sequence at this time, the inputted program change as a sequence event is not transmitted. When number is changed by DATA wheel or the ten key, that number is transmitted. A program change is transmitted also when a sequence is changed. When cursor is a PC field, press the [WINDOW] key, the "MIDI Program Change" window will open. Bank select = "YES" A program bank is transmitted. [PLAY START] It is transmitted together with the program change transmitted when a key is pressed. Bank select = "NO" A program bank is not transmitted. Note: It is effective only when Program Change is

31 NAME EDIT Edit of a name Please choose a character to change or input by a DATA wheel. The character chosen when the cursor key was pressed is decided, and cursor moves to the right. Change of a capital letter small letter, is please press F3[A/a] key in a character position to change. Please press F1[DELETE] key to delete the character on cursor. Please press F2[INSERT] key to insert. Example, an upside picture, when you want to delete "B", Please move cursor to the position of "B" and press F1[DELETE] key. Press F1[DELETE] key. "B" is deleted and it is set to "ACE." When you want to insert "D" between "C" and "E", please choose "D" by a DATA wheel after moving cursor to the position of "E" and pressing F2[INSERT] key. Press F2[INSERT] key. "D" is inserted between "C" and "E" and it is set to "ABCDE".

32 Please press F6[ENTER] key, if edit finishes. If the cursor key is pressed, it will become a small letter input mode. If the cursor key is pressed, it will become a capital letter input mode. When you want to perform copy and paste, please press F2[COPY] or F3[PASTE] key after pressing the F5[C & P] key.

33 Adjustment of Pad Sensitivity [MODE]+PAD10(OTHER) =>F4[PAD] We recommend you for MPC1000 BK-N to set a value as follows. Sensitivity: 25 Pad On Level:16

34 Selecting a Tempo Source This allows the performance of each sequence to a set tempo or the master tempo set by MPC1000. (MAS) = The master tempo is a single tempo setting that applies to all sequences and songs. When playing sequences this is useful if you always want each selected sequence to play at the same tempo. This can be especially useful in the Next sequence mode, where following sequences may have different tempos and you want them to all play at the same tempo. Notes: This tempo setting is not saved in the sequence file. (SEQ) = It play back at the tempo preset for each sequence.

35 SIMULT PAD If SIMULT is chosen by MODE, PAD set up with the target will be pronounced simultaneously. [MODE]+PAD11 Screen Press F4[MUTE] key. Example If pada01 is pressd in this setup, the sound of pada02 and pada03 will also be playd simultaneously. When recording Although pada01 is recorded, pada02 and pada03 are not recorded. When playing Play of pada01 will also play the sound of pada02 and pada03.

36 SIMULT SEQUENCE Two sequences can be played simultaneously. A sequence to play simultaneously, please choose in "SS" field. In the level field, the level of the sequence chosen in the "SS" field is adjusted. (0-200) Notes 1. The sequence of "SS" press F6 [SOLO] and is not muted. It is played back also at the time of [REC]+[PLAY] of an audio track. 2. It does not work in song mode. 3. A tempo change and a mute event is disregarded.

37 SAVE / LOAD / FORMAT Save of data Notes The total of the item (file and folder) that can do save in one folder is the maximum and is "1000". Therefore, please do not save the file of 1000 or more to one folder. When the file of 1000 or more is saved, it is not saved correctly. Moreover, even if it carries 131GB or more of HDD, it is recognized only to 131GB. Please move cursor to the upper right field, and select a save place. When you want to save to the folder of a hierarchically, 1. Please press the cursor key and move cursor to the down field. 2. Please choose the folder of a save place by a DATA wheel. 3. Please press the cursor key and open a folder. (Please display contents) 4. Please select Type of a save in the Save field. 5. When you save a file, please press the cursor key and move cursor to the file field. 6. Please choose the file save by a DATA wheel and press F6[DO IT] key. Example: When "Sample01" is save to "Autoload" folder. (Refer to a lower picture) Please press the cursor key and open a folder. (Please display contents) Please move cursor to "Sample01" of a left screen. A press F6[DO IT] key will save "Sample01" to a "Autoload" folder.

38 If a save is completed, "Sample01" will be displayed on a right screen and it will blink twice. Tips The audition of a sample to save can be performed. When the sample is chosen in the file field, the audition of the sample chosen if arbitrary pads are pressing can be performed. Moreover, even if it chooses a sample by a DATA wheel, pressing a pad, audition is Possible. Change of the file name of "ALL_SEQS&SONGS" The name of "ALL_SEQS&SONGS" can be changed when "ENTIRE MEMORY" or "ALL SEQUENCES" is saved. Note Although "ALL PROGRAMS" and "ALL SAMPLES" are saved independently one by one, "ALL_SEQS&SONGS" is collectively saved as one file. Moreover, even if the "Replace same file" field is "NO" in this screen, the "SEQS&SONGS" file of the same name is replace. Creating a NEW FOLDER Please press the F4[ NEW] key. Please setting the name of a folder and press the F6[ENTER] key. A new folder is created and will be state which the folder opened.

39 Loading of a folder or a file A read place is select in the Load field. Please move cursor to a folder or a file to load, and press the F6[DO IT] key. Sample to load is assigned to a pad. Press the [WINDOW] key, the "Option" window will open. When the setup here was turned "ON" and loading of a sample is performed, the window of "Assign to Pad" is displayed. Please move cursor to the pad number which wants to assign the sample to load, and press the F5[YES] key. When the F4 (NO) key is pressed, it does not assign a pad. And a window is closed. Note: It is not assigned to a pad even if it will press F5 (YES) key, if the program is not made. Audition of a sample When the sample is chosen in the file field, the audition of the sample chosen if F5[PLAY] key or arbitrary pads are pressing can be performed. Moreover, even if it chooses a sample by a DATA wheel or cursor key, pressing a arbitrary pad, audition is Possible. Furthermore, when the [PLAY] or [PLAY START] key is pressed, the sample is played back to end.

40 AUTO LOAD LOAD SCREEN Press the F4[A.LOAD] key, the "Auto Load" window will open. Please select a device. 1. Please move cursor to the right. 2. Please choose the folder which carries out an auto load. 3. If a setting finishes, please press the F5[ENTER] key. Note: The auto load of the arbitrary folders can be carried out. FORMAT SAVE SCREEN When cursor is upper right field, press the [WINDOW] key, the "Property" window will open. Press the F2[FORMAT] key. LOAD SCREEN Press the [WINDOW] key, the "Option" window will open. Press the F2[FORMAT] key.

41 Q-Link [MODE]+PAD1 Please move cursor to the TARGET field, and hit a pad to choose, or turn and choose a DATA wheel. Notes "IN(Input thru)" cannot be set as TARGET. Two NOTE ON cannot be set as the same TARGET. Priority is given to a setup of Q2 when the same TARGET is chosen. Since a simult pad is influenced, Q1 NOTE ON Q2 REAL TIME cannot be set to the same target in JJ OS. In this case, please use by Q1 REAL TIME Q2 NOTE ON. "VELOCITY" and "Sample Start point" and "Sample End point" was added to the parameter of "NOTE ON". Sample Start point Sample End point

42 The example of a setting of the variable range. ("Sample Start point" and "Sample End point") HIGH = Variable range When the variable range of a "Start point" is set as "HIGH = 60", the variable range becomes like a following figure. HIGH = Variable range When the variable range of a "End point" is set as "HIGH = 50", the variable range becomes like a following figure.

43 SONG A layout is changed and time and "TOTAL" are added. TOTAL = Total bars Notice Audio track can memorize only one sample. Therefore, when a conversion is performed, only Audio track of the first step is converted.

44 TRACK MUTE A press F1[ALLMUTE] key will mute all the tracks. A press F2[CLEAR] key will cancel mute of all the tracks. Hit the pad that corresponds to the track that you wish to play, while pressing the F6[SOLO] key. F6[SOLO] will be highlighted and F5[UNSOLO] will be displayed and MPC will play only the selected track while it mutes the other tracks. You can switch the tracks to play, by hitting a pad. SCREEN 1 Pressing the F5[UNSOLO] KEY deactivates the solo function, with the current status. SCREEN 2 If F6[SOLO] is pushed in the state of SCREEN 1, it will return to the state before going into solo function. When you want to record the performance of TRACK MUTE, [REC] or please press [PLAY] or the [PLAY START] key, pressing the [OVER DUB] key. Note If you want to stop a sound immediately when the sample of a one shot is muted, please make a setup of a "Track Mute" window into IMMEDIATE. If the [WINDOW] key is pressed, the window of "Track Mute" will open.

45 Please set "Mute/stop of one-shot sample" Field to IMMEDIATE. THROUGH: One shot samples are always played until sample end. IMMEDIATE: One shot samples are stopped immediately when pressing stop or muting the pad. Please set the "Use events" field to OFF to repeal the recorded track mute event. In the case of OFF, Even if it play back the sequence on which the mute event is recorded, a track mute event is not played back. Notes The Next sequence cannot be performed during recording of a track mute event. The "UNDO" key does not work in track mute mode.

46 TRIM [MODE]+PAD6 Press the F3[Zoom In] key, a waveform is zoom in. BAR > or [SHIFT]+ cursor key can also perform zoom in. A level is expanded and displayed by cursor key. Press the F2[Zoom Out] key, a waveform is zoom out. < BAR or [SHIFT]+ cursor key can also perform zoom out. Note: Cursor move on a sample name should press the cursor key, when cursor is in St field. Adjustment of a start point Please move cursor to the St field and turn a DATA wheel. (A value can be changed 10 times by a [SHIFT]+DATA wheel.) Furthermore, it can be changed by Q1Slider, if Q1[AFTER] key is ON. Adjustment of an end point Please move cursor to the End field and turn a DATA wheel. (A value can be changed 10 times by a [SHIFT]+DATA wheel.) Furthermore, it can be changed by Q2Slider, if Q2[AFTER] key is ON. Note: A start or an end point can be adjusted auditioning, if a DATA wheel is turned pressing arbitrary pads. When cursor is a Sample field, press the [WINDOW] key, the "Sample list" window will open. Chooses a sample by a DATA wheel or cursor key, pressing a arbitrary pad, audition is Possible.

47 INSERT SILENCE, STEREO =>MONO, BIT CONVERT, and RING MODULATION were added to F6[EDIT]. F6[EDIT] DISCARD EXTRACT DELETE SILENCE INSERT SILENCE NORMALIZE REVERES TIME STRETCH PITCH SHIFT STEREO L=> MONO STEREO R => MONO STEREO L+R => MONO STEREO L-R => MONO BIT CONVERT RING MODULATION INSERT SILENCE The silence of the set time is inserted from a start point. In the case of the above figure, the silence of 100mSEC is inserted from the start point set in TRIM mode. BIT CONVERT A sample can be converting into the sound of 4-12 bits. F2(OVER W) = An overwrite convert is carried out with the set value. F3(ALL) = The overwrite convert of all the samples is carried out with the set value. If PAD13-PAD16 is pressed, the audition of the present set point can be performed. If PAD01-PAD12 is pressed, it can try listening an original sound. Note: File size does not change after convert. RING MODULATION The output of two oscillators is mixed and a metallic sound is made. An audition is possible, when F2[PLAY] key or PAD13-PAD16 is pressing. Frequency: 100Hz-5000Hz WAVE: Sine, Square Mix : 1-10 CHOP Press F5[CHOP] key.

48 When cursor is in St field, the start point of a region can be adjusted. When cursor is in St field, if the cursor key is pressed, the cursor in the region field will move to a left region. Please move cursor to the End field to adjust the end point of a region. When cursor is in End field, if the cursor key is pressed, the cursor in the region field will move to a right region. A level is expanded and displayed by or cursor key. BAR > or [SHIFT] + cursor key can also perform zoom in. < BAR or [SHIFT] + cursor key can also perform zoom out. Move of a region can be performed even if it turns a DATA wheel, pressing or cursor key. AUTO Press F2[AUTO] If AUTO is used, search of an attack will be performed automatically and it will be divided on the basis of the attack portion. Recovery time(10-100): This sets the minimum time between the attack and the next attack. (The attack within a time is ignore.) Threshold(0-100): This sets the detectable level of an attack. If a setup finishes, please press the F5[DO IT] key. Note: The sample for 20 seconds or more cannot AUTO. SLICE If the F3[SLICE] key is pressed, it becomes slice mode and the number of regions can be changed. (2-64) Slice mode will be canceled, if the F3[SLICE] key is pressed once again or the cursor key is pressed.

49 DIVIDE The region chosen by press the F4[DIVIDE] key is divided into two. COMBINE The region chosen and an adjoining region are combined by press the F5[COMBINE] key. When cursor is in St field, it combines with the region by the side of a start (left), and when it is in the End field, it combines with the region by the side of End (right). EDIT If the F6[EDIT] key is pressed, the window of "Extract" will open. F5[DO IT]: The selected region is made into another sample. F2: Each which was divided on a slice point is made into another sample. For example, in the case of Sample01 divided into 32, the samples from Sample01-1 to Sample01-32 are created. F3: It changes into a Patched Phrase. Note: It becomes a mono sample when the sample of a stereo is changed into Patched Phrase. Setting the loop Please press the F1[LOOP ON/OFF] key and make it [LOOP ON].

50 Adjustment of a loop point Please move cursor to the Loop field and turn a DATA wheel. (A value can be changed 10 times by a [SHIFT]+DATA wheel.) Furthermore, it can be changed by Q1Slider, if Q1[AFTER] key is ON. Adjustment of a end point Please move cursor to the End field and turn a DATA wheel. (A value can be changed 10 times by a [SHIFT]+DATA wheel.) Furthermore, it can be changed by Q2Slider, if Q2[AFTER] key is ON. If the F4(JOINT) key is pressed, the window of "Joint" will open. It can adjust looking at a joint. The screen left is an end point and the right is a loop point. A level is expanded and displayed by cursor key. Selection of loop mode Please move cursor to the loop mode field, and turn and select a DATA wheel. = Forward loop. (From a loop point to between end points, playback is repeated to a forward direction.) = Alternate loop. (From a loop point to between end points, playback is repeated for a forward direction/reverse direction alternately.) Linking the loop point to the start point Please move cursor to field. Turn the DATA wheel and set the field to (locked by the key).

51 A loop point becomes the same value as a start point, and a start point will also be changed into the same value if a loop point is changed. A loop point will also be changed into the same value if a start point is changed similarly. Please restore to (unlocked by the key) to set up a loop point and a start point separately

52 OTHER Voice Monitor [MODE]+PAD10(OTHER) =>F1[GLOBAL] Splash Screen If the bmp file of the following conditions is in the ROOTof CF card or HDD, the bmp picture will be displayed at the time of MPC starting. Please use for the display of a user name, a band name, etc. MUTE When F5[MUTE] is a highlight, MUTE of the select track is set to ON. Customizable Click/Metronome Sounds Please choose the sample of the Accent field and the Normal field in the window of "Click/Metronome". A sample can be changed on real time. INTERNAL = sample of INTERNAL SAMPLE = Loaded sample Lvl = LEVEL(0-200) "Shift Timing" is added to the window of "Timing Correct". Press F3[Q-LINK] key. Please set up Q-LINK on this screen to perform a setup of "Swing" and "Shift" with a slider.

53 In the "Keep or Retry" window of RECORD ([MODE]+PAD5), F4 [topad] is added. 1. Please move cursor to the pad field. 2. Please select a pad number to assign. 3. Please press the F4[toPAD] key. Behavior mode of Next sequence. Please press a [WINDOW] key and open the window of "Sequence". Cursor is move to the "Next sequence" field and behavior mode is select. In case of setting in the upper picture, after playing back Sequence to END, it plays back Next sequence. Moreover, the case of this setup, if the [PLAY START] key is pressed during playbacks, it changes to Next sequence immediately. In this setup, point in time it changes to Next sequence, playbacks from the beginning of that sequence. In this setup, Next sequence is playbacks from the position of Now when changing to Next sequence. Note: Behavior can be changed while playing back a sequence. USB connection If it goes into the screen of USB, it will be automatically recognized by PC. When not recognized, please press the F6 [MOUNT] key. Note: It can go to the other screens, in the state which connected the USB cable.

54 TAP TEMPO The function of tap tempo can be assigned to a pad. Tap tempo: OFF,TAP TEMPO,PAD1,PAD2,,,,,PAD16 Note No.= Change of the tap tempo by MIDI IN NOTE. Indicator of a main screen An indicator is displayed on the upper part of a main screen. MTC MIDI CLOCK Send Receive stops during receive Input thru(on)

MPC1000 & MPC2500 JJ OS128XL OPERATIONS MANUAL

MPC1000 & MPC2500 JJ OS128XL OPERATIONS MANUAL MPC1000 & MPC2500 JJ OS128XL OPERATIONS MANUAL This manual is written only about the function added by JJ OS. Please refer to the manual of AKAI for the basic function of MPC. When you change OS, please

More information

Chapter 2: Basic Operation...17

Chapter 2: Basic Operation...17 Chapter 1: Introduction...1 Top Panel...1 Front Panel...7 Rear Panel...8 Bottom Panel...9 Output Connectivity Example...10 Analog Input Connectivity Example...10 Digital Connectivity Example...11 USB Connectivity...11

More information

REFERENCE MANUAL. Version 2.00

REFERENCE MANUAL. Version 2.00 V.2.00 REFERENCE MANUAL Version 2.00 Chapter 1: Introduction...1 Overview... 1 Top Panel...1 Front Panel...8 Rear Panel...8 Bottom Panel...10 Hooking Up Your MPC5000...11 Output Connectivity Example...11

More information

MPC The MPC2500 comes with 16MB of onboard memory which can be expanded up to 128 MB of RAM via the optional EXM128 memory card.

MPC The MPC2500 comes with 16MB of onboard memory which can be expanded up to 128 MB of RAM via the optional EXM128 memory card. MPC 2500 Product Description The Akai Professional MPC2500 Music Production Center combines a 64-Track MIDI Sequencer with a 32-voice 16bit Stereo Digital Sampler. The MPC is a rock solid sequencing and

More information

MV-8000 Production Studio. When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has:

MV-8000 Production Studio. When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has: The Main Points When asked So what s up with the new MV-8000? Here are the opening points to hit The MV-8000 has: Integrated Sampling, MIDI Sequencing, and Audio Recording 2 Samplers In One High Quality

More information

DER OTO. With this firmware revision, you can use your Biscuit as a standard one (Revision 1.2) or as Der OTO.

DER OTO. With this firmware revision, you can use your Biscuit as a standard one (Revision 1.2) or as Der OTO. User Manual Rev 2.3 February 2012 1 DER OTO PRESENTATION Der OTO is the new Biscuit firmware (revision 2) and turns your Biscuit into a monophonic synth. You can play Der OTO with a standard MIDI keyboard,

More information

MOOG SUB 37 - FIRMWARE UPDATE UPDATE INSTRUCTIONS FOR WINDOWS (Skip to the next section for Mac OSX instructions)

MOOG SUB 37 - FIRMWARE UPDATE UPDATE INSTRUCTIONS FOR WINDOWS (Skip to the next section for Mac OSX instructions) MOOG SUB 37 - FIRMWARE UPDATE 1.2.0 WHAT YOU WILL NEED A computer A program for sending MIDI SysEx data to your Sub 37. We recommend Bome SendSX for Windows, or SysEx Librarian for Macintosh. DOWNLOAD

More information

v1.5 MIDI Implementation guide

v1.5 MIDI Implementation guide v1.5 MIDI Implementation guide GURU v1.5 MIDI Implementation guide 2007 FXpansion Audio UK Ltd. In this document: 3 Introduction 3 1: MIDI Channel mapping summary 3 2: A note about Pad MIDI Learn 4 3:

More information

EasyStart. EMX1 Main Features. EasyStart CONTENTS

EasyStart. EMX1 Main Features. EasyStart CONTENTS EasyStart EMX1 Main Features ValveForce Technology adds tube warmth using two 12AX7 tubes with a separate gain knob. MMT Technology with 16 different types of synthesis for totally new and dynamic sounds.

More information

User Guide English. Manual Version 1.0

User Guide English. Manual Version 1.0 User Guide English Manual Version 1.0 Table of Contents Welcome to the MPC... 5 System Requirements and Product Support... 5 About This Manual... 6 Important Notes... 7 Installation... 7 MPC Hardware Overview...

More information

MPC Essentials Release Notes

MPC Essentials Release Notes MPC Essentials Release Notes About Akai Professional is continually updating and enhancing MPC Essentials. This document lists the new features, fixes and improvements made to your MPC Essentials software.

More information

Text and Layout: Stan Steez Cover Design: Defect Proofreading: Don

Text and Layout: Stan Steez Cover Design: Defect Proofreading: Don Text and Layout: Stan Steez Cover Design: Defect Proofreading: Don Table of Contents Book I OS 1: Table of Contents Preface: Welcome to the Next Level... Introducing the OS About The New Features About

More information

Portable Music Studio

Portable Music Studio Everything you need, all in one. いつでも どこでも 作曲 Instruction Manual (08-2018) Portable Music Studio 1 Contents Features... 3 Basic Controls...4 - Menus and saving.. 5 Pattern Mode... 6 Global Pattern Settings...7

More information

JX-3P. PLUG-OUT Software Synthesizer Owner s Manual Roland Corporation 01

JX-3P. PLUG-OUT Software Synthesizer Owner s Manual Roland Corporation 01 JX-3P PLUG-OUT Software Synthesizer Owner s Manual 2018 Roland Corporation 01 Introduction When using the JX-3P for the first time, you must specify the MIDI Input/Output setting in the Setting window

More information

TB-303. Software Bass Line Owner s Manual Roland Corporation 01

TB-303. Software Bass Line Owner s Manual Roland Corporation 01 TB-303 Software Bass Line Owner s Manual 2019 Roland Corporation 01 Introduction For details on the settings for the DAW software that you re using, refer to the DAW s help or manuals. About Trademarks

More information

Using The Akai MPC With Ableton Live

Using The Akai MPC With Ableton Live Using The Akai MPC With Ableton Live Written By Andy Avgousti (MPC-Tutor) Copyright Andy Avgousti 2012 Published by MPC-Samples.com 2012 All rights reserved. No part of this book, nor any of its associated

More information

MPC2000XL-MCD Product Overview

MPC2000XL-MCD Product Overview Product Overview Product Description The Akai Professional MPC2000XL-MCD MIDI Production Center combines a 64-Track MIDI Sequencer and a 32-voice Stereo Digital Sampler, with 16 velocity and pressure sensitive

More information

Firmware Version 1.60 User s Guide

Firmware Version 1.60 User s Guide MZ-X500 EN MZ-X300 Firmware Version 1.60 User s Guide MZX500/300-160-E-1A 1 Updates Provided by Firmware Version 1.10 Firmware changes provided by Version 1.0X are those described below. Addition of a

More information

Workshop. Automation ÂØÒňΠMV-8000

Workshop. Automation ÂØÒňΠMV-8000 ÂØÒňΠMV-8000 Workshop Automation 2006 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission of Roland Corporation U.S.

More information

EM-1 Main Features. EasyStart CONTENTS

EM-1 Main Features. EasyStart CONTENTS EasyStart EM-1 Main Features Pattern performance with emphasis on realtime operation All functions are right on the surface, with no menus or pages to slow you down! Familiar 16-step key interface to build

More information

MPC1000 Product Overview

MPC1000 Product Overview Product Overview Product Description The Akai Professional MPC1000 Music Production Center combines a 64-Track MIDI Sequencer and a 32-voice Stereo Digital Sampler, with 16 velocity and pressure sensitive

More information

Operator's Manual. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

Operator's Manual. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Operator's Manual WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Important Notice The material in this document is copyright to AKAI professional M.I. Corp.,

More information

MPC 2500 Manual Addendum v1.1. Addendum v1.1

MPC 2500 Manual Addendum v1.1. Addendum v1.1 Addendum v1.1 About this Addendum: The MPC 2500 s operating system is upgradeable and allows us to add features and make changes to existing features after it has left the factory floor. Because we re

More information

Selection tool - for selecting the range of audio you want to edit or listen to.

Selection tool - for selecting the range of audio you want to edit or listen to. Audacity Quick Guide Audacity is an easy-to-use audio editor and recorder. You can use Audacity to: Record live audio. Convert tapes and records into digital recordings or CDs. Edit sound files. Cut, copy,

More information

Version 2.0 OPERATOR'S MANUAL

Version 2.0 OPERATOR'S MANUAL Version 2.0 OPERATOR'S MANUAL Important Notice The material in this document is copyright to AKAI professional M.I. Corp., and may not be quoted or reproduced in any form without written permission from

More information

Procussion operation manual Basic Operation 15 BASIC OPERATION

Procussion operation manual Basic Operation 15 BASIC OPERATION Basic Operation 15 BASIC OPERATION 16 Main Controls 17 BASIC OPERATION MAIN CONTROLS MIDI ACTIVITY EDIT MENU SELECT CURSOR CONTROL VOLUME CONTROL I/O MASTER EDIT ENTER C01 Vol127 Pan=K CURSOR DATA VOLUME

More information

FRONT PANEL OVERVIEW...1 REAR PANEL OVERVIEW...3 HOOKUP DIAGRAM...4 DISPLAYING INFORMATION...6

FRONT PANEL OVERVIEW...1 REAR PANEL OVERVIEW...3 HOOKUP DIAGRAM...4 DISPLAYING INFORMATION...6 TABLE OF CONTENTS FRONT PANEL OVERVIEW...1 REAR PANEL OVERVIEW...3 HOOKUP DIAGRAM...4 DISPLAYING INFORMATION...6 OCTAVE AND TRANSPOSITION...6 NOTE...6 NOTE AFTERTOUCH (Channel Pressure)...6 CONTROL CHANGE...6

More information

StepPolyArp Unit. Step Polyphonic Arpeggiator / Sequencer App & Audio Unit MIDI effect for ios

StepPolyArp Unit. Step Polyphonic Arpeggiator / Sequencer App & Audio Unit MIDI effect for ios StepPolyArp Unit Step Polyphonic Arpeggiator / Sequencer App & Audio Unit MIDI effect for ios Presentation... 1 Application setup... 2 MIDI connections between ios applications... 2 MIDI over WiFi on macos...

More information

User Guide. FingerBeat 2.0. manual version 1.1

User Guide. FingerBeat 2.0. manual version 1.1 User Guide FingerBeat 2.0 manual version 1.1 1 Dear Friend, Thank you for downloading & supporting our work. FingerBeat is an easy to use pocket sampler, drum machine designed for intuition and creative

More information

User Manual. Drum Machine

User Manual. Drum Machine User Manual Drum Machine Overview Interface Overview Interface 1 Nithonat s interface is split into three parts: Internal sequencer Responsible for editing patterns in Int.Seq. mode. Internal sequencer

More information

Digitakt OS 1.07 Release Information

Digitakt OS 1.07 Release Information Digitakt OS 1.07 Release Information Elektron Music Machines March 9, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx firmware

More information

HS-P82. Contents. New functions in firmware V2.00

HS-P82. Contents. New functions in firmware V2.00 Contents New functions in firmware V2.00...1 Improved operation when the REC MODE page REC Mode item is set to Mirror...2 Mirror DELETE MODE setting added...2 Changing the names of a take recorded at the

More information

Recording Your Audio and Creating Your MP3 File using Audacity

Recording Your Audio and Creating Your MP3 File using Audacity http://www.larkin.net.au/ Page 1 Recording Your Audio and Creating Your MP3 File using Audacity Many people who are working with digital audio are choosing a program called Audacity for many reasons: 1.

More information

MOTIF XF Editor Owner s Manual

MOTIF XF Editor Owner s Manual MOTIF XF Editor Owner s Manual Contents What is the MOTIF XF Editor?...2 Studio Manager...2 Studio Connections...2 About Open Plug-in Technology...3 Data Structure of the MOTIF XF Editor...4 Starting the

More information

QUICK-START GUIDE ROLAND DJ-808

QUICK-START GUIDE ROLAND DJ-808 QUICK-START GUIDE ROLAND DJ-808 Installation and Setup The Roland DJ-808 requires drivers for both Windows and MacOS operating systems. IMPORTANT NOTE: Please ensure you have the latest available drivers

More information

Using Impact LX with Reason

Using Impact LX with Reason Using Impact LX with Reason Applicable to Impact LX25, 49, 61 & 88 www.nektartech.com www.nektartech.com Using Impact LX with Reason Reason Integration Setup and Configuration The Impact LX Reason Integration

More information

User Guide English. Manual Version 1.8

User Guide English. Manual Version 1.8 User Guide English Manual Version 1.8 Table of Contents Welcome to the MPC... 12 System Requirements and Product Support... 12 About This User Guide... 13 Important Notes... 14 Installation... 14 Windows...

More information

000 How to Use this Book... 11

000 How to Use this Book... 11 Table of Contents 000 How to Use this Book... 11 Which MPCs are compatible with this book?... 11 Hardware UI Vs Computer UI... 11 Recreating the Tutorial Examples... 11 Reading This Book On Mobile Devices...

More information

Roland Boutique JP-08 FAQ

Roland Boutique JP-08 FAQ Q&A I cannot transmit the data using a micro USB cable........................................................ 2 When I put the JP-08 in Dual mode, the UPPER part is no longer heard; why is this?...............................

More information

MainStage 2. Exploring MainStage

MainStage 2. Exploring MainStage MainStage 2 Exploring MainStage KKApple Inc. Copyright 2011 Apple Inc. All rights reserved. Your rights to the software are governed by the accompanying software license agreement. The owner or authorized

More information

nativekontrol PXT-Live User Manual Version 1.1.5

nativekontrol PXT-Live User Manual Version 1.1.5 nativekontrol PXT-Live User Manual Version 1.1.5 1 CHANGES IN THIS VERSION 2 GENERAL OVERVIEW 3 SETUP 3.1 Installing PXT-Live 3.2 Live Settings 3.3 UserPreferences 4 GLOBAL CONTROLS 4.1 Buttons/Pedals

More information

PSP Rhythm User s Manual

PSP Rhythm User s Manual PSP Rhythm User s Manual Introduction pg. 02 Main Menu pg. 03 Button Icon Legend pg. 03 User Interface pg. 04 Pattern View pg. 05 Track View pg. 07 Wave View pg. 09 Effects View pg. 11 Song View pg. 14

More information

To ensure long, trouble-free operation, please read this manual carefully. Precautions

To ensure long, trouble-free operation, please read this manual carefully. Precautions Thank you purchasing the Korg ELECTRIBE R ER-. In order to enjoy long and trouble-free use, please read this manual carefully and use the instrument correctly. E To ensure long, trouble-free operation,

More information

User Manual. for ArcTrax UWP version

User Manual. for ArcTrax UWP version User Manual for ArcTrax UWP version 1.0.3.0 Table of Contents 1 Overview... 2 1.1 Introduction... 2 1.2 Structure... 2 2 Panel Reference... 3 2.1 Overview... 3 2.2 Controls... 4 2.3 Oscillator... 5 2.4

More information

About this manual. Conventions in this manual. The manuals and how to use them

About this manual. Conventions in this manual. The manuals and how to use them Operation Guide E 1 Thank you for purchasing the Korg KROSS music workstation. To ensure trouble-free enjoyment of your new instrument, please read this manual carefully and use the product as directed.

More information

Axiom DirectLink for Reason and Record User Guide

Axiom DirectLink for Reason and Record User Guide User Guide Legal Notices This guide is copyrighted 2010 by Avid Technology, Inc., with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written

More information

MOTIF XS Editor VST Owner s Manual

MOTIF XS Editor VST Owner s Manual MOTIF XS Editor VST Owner s Manual Contents What is the MOTIF XS Editor VST?...2 Data Structure of the MOTIF XS Editor VST...3 Starting the MOTIF XS Editor VST...4 An Example of MOTIF XS Editor VST in

More information

About this manual. Conventions in this manual. The manuals and how to use them

About this manual. Conventions in this manual. The manuals and how to use them 1 Thank you for purchasing the Korg KROSS SYNTHESIZER WORKSTATION. To help you get the most out of your new instrument, please read. About this manual The manuals and how to use them The KROSS comes with

More information

Digitakt OS 1.10 Release Information

Digitakt OS 1.10 Release Information Digitakt OS 1.10 Release Information Elektron Music Machines June 29, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx firmware

More information

Audacity Tutorial C. Stanley

Audacity Tutorial C. Stanley Audacity Tutorial C. Stanley Getting to Know Audacity: Silence Keys Microphone Select Editing Tools Recording Tools Cut, Copy, Paste Undo, Redo Zoom How to Record: Select external microphone. Press the

More information

NUAGE MASTER Ncs500-CT

NUAGE MASTER Ncs500-CT CONTROL SURFACE NUAGE MASTER Ncs500-CT Operation Manual Using this manual This operation manual supports keyword searching and linking as follows. Keyword searching Searching for keywords is performed

More information

Version 4 Software. Version 4 - Supplement. Issue A, August 2007 for Version 4.0+ Software. D5 V4 Supp 1-1

Version 4 Software. Version 4 - Supplement. Issue A, August 2007 for Version 4.0+ Software. D5 V4 Supp 1-1 Version 4 - Supplement Issue A, August 2007 for Version 4.0+ Software D5 V4 Supp 1-1 D5 V4 Supp 1-2 Contents 1.0 Introduction... 1-4 1.1 Hardware Configuration Options... 1-4 1.2 Audio Sync Options...

More information

x0xb0x Bassline Synthesizer ( Sokkos OS ) User Manual

x0xb0x Bassline Synthesizer ( Sokkos OS ) User Manual x0xb0x Bassline Synthesizer ( Sokkos OS 1.9.1 ) User Manual Contents Synthesizer Section 1. Knobs, buttons & LED s 1.1 Function knob 1.2 Bank knob 1.3 Tempo knob & LED 1.4 Bank LED s 1.5 Buttons & LED

More information

BeatMaker 3 User Manual. Revision:

BeatMaker 3 User Manual. Revision: BeatMaker 3 User Manual Revision: 3.0.10 What s new in version 3.0.10 of this manual - Updated section Quick Start Guide: 1.3 Transport toolbar - Added section Performance View: 2.7 Select mode - Updated

More information

User Guide. English. Manual Version 2.2

User Guide. English. Manual Version 2.2 User Guide English Manual Version 2.2 Table of Contents Introduction... 7 Tutorial... 12 System Requirements & Product Support... 7 Creating a Drum Kit... 12 About This User Guide... 8 Creating a Drum

More information

Sales Manual Part II

Sales Manual Part II Sales Manual Part II In this sales manual, you ll be able to show how to make a song and create a WAV file of the song. Table of Contents Page 1. Main Features of the Sequencer 2 2. How to Demo the Sequencer

More information

RHIZOME HOST USER GUIDE V 2.1

RHIZOME HOST USER GUIDE V 2.1 o RHIZOME HOST USER GUIDE V 2.1 1. INTRODUCTION... 5 2. UNIT WORKFLOW... 6 2.1. Displays... 6 2.2. Matrix Edit... 6 2.3. Transport bar... 7 2.4. Common function buttons... 8 2.5. Left zone white printed

More information

USB / MIDI / CV KEYBOARD CONTROLLER

USB / MIDI / CV KEYBOARD CONTROLLER USB / MIDI / CV KEYBOARD CONTROLLER 1. MAX49 2. AC 3. USB 4. CD (Vyzex AKAI CONNECT ) 5. DVD (Ableton Live Lite Akai Edition) 6. () AC () () () () 1. CD CD 2. : Windows : CD Vyzex installer (.exe) Mac:

More information

New Functions in Version 2.0 Nouvelles Fonctions de la Version 2.0 Neue Funktionen in Version 2.0

New Functions in Version 2.0 Nouvelles Fonctions de la Version 2.0 Neue Funktionen in Version 2.0 New Functions in Version 2.0 Nouvelles Fonctions de la Version 2.0 Neue Funktionen in Version 2.0 o [ W 2.0 V @ \ E F G J 1 Several new functions have been added to version 2.0 for Trinity series music

More information

New Features in Digital Performer 5.13

New Features in Digital Performer 5.13 New Features in Digital Performer 5.13 OVERVIEW This document provides late-breaking information about new features in Digital Performer 5.13 not covered in the DP5 manuals. Current system requirements.....................................

More information

User Guide. Manual Version 1.0

User Guide. Manual Version 1.0 User Guide Manual Version 1.0 Table of Contents Introduction... 3 System Requirements and Product Support... 3 Installation... 3 Windows... 3 Mac OS X... 3 Quick Start... 4 Operation... 5 Global Controls...

More information

MiX16 PRO. Theatre Show System. User Manual. designed and created by Gregor Krasevec.

MiX16 PRO. Theatre Show System. User Manual. designed and created by Gregor Krasevec. MiX16 PRO Theatre Show System User Manual designed and created by Gregor Krasevec www.mix16apps.com info@mix16apps.com MiX16 PRO Theatre Show System 2014 Gregor Krasevec 1 of 21 Introduction Introducing

More information

OWNER S MANUAL rev. 2.02

OWNER S MANUAL rev. 2.02 Model 8-422 ver. 2.0 OWNER S MANUAL rev. 2.02 Om._03637 2010 CHD Elektroservis Table of contents: page 1. Product description.......................................... 4 1.1. DCB communication..........................................

More information

OPERATION MANUAL VST / AU

OPERATION MANUAL VST / AU OPERATION MANUAL VST / AU This manual is under construction. If you want to help to improve it contact: info@audiorealism.se Introduction AudioRealism Bass Line 3 (ABL3) is an emulation of a classic pattern

More information

R3 Main Features. R3 Connections 2

R3 Main Features. R3 Connections 2 EasyStart R3 Main Features MMT (Multi Modeling Technology): The R3 offers a wide range of synth waveforms and oscillator algorithms Powerful 16-channel Vocoder with Formant Motion recording Up to five

More information

and close the various Traktor Panels. Setup: click on the setup icon to open the setup dialog. Close: clicking this icon will close TRAKTOR DJ Studio.

and close the various Traktor Panels. Setup: click on the setup icon to open the setup dialog. Close: clicking this icon will close TRAKTOR DJ Studio. Welcome... TRAKTOR DJ Studio 2 Quick Reference...to TRAKTOR DJ Studio 2, the latest and most advanced version of the software that changed the way DJs think about computers. We ve introduced a number of

More information

Digitakt OS 1.06 Release Information

Digitakt OS 1.06 Release Information Digitakt OS 1.06 Release Information Elektron Music Machines February 12, 2018 How to upgrade: Upgrading from within the OS Select SYSTEM in the SETTINGS menu, and then select OS UPGRADE. Send the SysEx

More information

GETTING STARTED GUIDE. Features of the SP6

GETTING STARTED GUIDE. Features of the SP6 GETTING STARTED GUIDE This Getting Started Guide will give you a quick overview of the SP6. A full manual with additional information is available from www.kurzweil.com. Features of the SP6 FlashPlay technology

More information

MOX6/MOX8 Editor VST Owner s Manual

MOX6/MOX8 Editor VST Owner s Manual MOX6/MOX8 Editor VST Owner s Manual Contents What is the MOX6/MOX8 Editor VST?...2 Data Structure of the MOX6/MOX8 Editor VST...3 Starting the MOX6/MOX8 Editor VST...4 An Example of MOX6/MOX8 Editor VST

More information

Precautions. THE FCC REGULATION WARNING (for U.S.A.)

Precautions. THE FCC REGULATION WARNING (for U.S.A.) Owner s Manual E 2 Precautions Location Using the unit in the following locations can result in a malfunction. In direct sunlight Locations of extreme temperature or humidity Excessively dusty or dirty

More information

TR-808. Software Rhythm Composer Owner s Manual. Copyright 2018 ROLAND CORPORATION 01

TR-808. Software Rhythm Composer Owner s Manual. Copyright 2018 ROLAND CORPORATION 01 TR-808 Software Rhythm Composer Owner s Manual Copyright 2018 ROLAND CORPORATION 01 Introduction For details on the settings for the DAW software that you re using, refer to the DAW s help or manuals.

More information

Owner s Manual. Copyright 2017 ROLAND CORPORATION 01

Owner s Manual. Copyright 2017 ROLAND CORPORATION 01 Owner s Manual Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (leaflet USING THE UNIT SAFELY and Startup Guide). After reading, keep the document(s) where it will be available

More information

Reason Remote support for Mackie control surfaces

Reason Remote support for Mackie control surfaces Reason Remote support for Mackie control surfaces This document describes the Remote implementation for Mackie Control, Extender and C4. For general information about how to use Remote in Reason, please

More information

Version 2.0 Manual Supplement

Version 2.0 Manual Supplement E AW4416 This manual supplement explains the functions and specifications that have been added or changed in version 2.0 of the AW4416 s system software. Operation explains how to use the new functionality,

More information

Owner s Manual. Copyright 2017 ROLAND CORPORATION

Owner s Manual. Copyright 2017 ROLAND CORPORATION Owner s Manual Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES (Startup Guide). After reading, keep the document(s) where it will be available for immediate reference.

More information

G-Stomper Audio Editor V Audio Editor Overview... 2

G-Stomper Audio Editor V Audio Editor Overview... 2 G-Stomper Studio G-Stomper Rhythm G-Stomper VA-Beast User Manual App Version: 5.7 Date: 14/02/2018 Author: planet-h.com Official Website: http://www.planet-h.com/ Contents 9 Audio Editor... 2 9.1 Overview...

More information

GETTING STARTED WITH DJCONTROL COMPACT AND DJUCED 18

GETTING STARTED WITH DJCONTROL COMPACT AND DJUCED 18 GETTING STARTED WITH DJCONTROL COMPACT AND DJUCED 18 INSTALLATION Connect the DJControl Compact to your computer Install the DJUCED 18 software Launch the DJUCED 18 software More information (forums, tutorials,

More information

The MPC Renaissance & MPC Studio Bible - Demo Tutorial (For MPC Software 2.x)

The MPC Renaissance & MPC Studio Bible - Demo Tutorial (For MPC Software 2.x) The MPC Renaissance & MPC Studio Bible - Demo Tutorial (For MPC Software 2.x) This free tutorial is taken from MPC-Tutor s tutorial book The MPC Renaissance & MPC Studio Bible (MPC Software 2.1 Edition).

More information

Using BOSS TONE STUDIO for ME-80

Using BOSS TONE STUDIO for ME-80 This document explains operation of BOSS TONE STUDIO for ME-80 (subsequently referred to as TONE STUDIO ). Getting Ready to Use TONE STUDIO Important terms in TONE STUDIO Library This is a storage area

More information

HALion 4. Version history Known issues & solutions. Januar 2013 Steinberg Media Technologies GmbH

HALion 4. Version history Known issues & solutions. Januar 2013 Steinberg Media Technologies GmbH HALion 4 Version history Known issues & solutions Januar 2013 Steinberg Media Technologies GmbH Table of contents About... 3 HALion 4.5.4... 4 Issues resolved... 4 HALion 4.5.3... 5 Improvements... 5 Issues

More information

User Guide. English. Manual Version 1.0

User Guide. English. Manual Version 1.0 User Guide English Manual Version 1.0 Table of Contents (Click a chapter/section to skip to it.) Introduction... 5 Box Contents... 5 Support... 5 About This User Guide... 5 Initial Setup... 6 1. Software/Driver

More information

Using The Akai MPC With Pro Tools

Using The Akai MPC With Pro Tools Using The Akai MPC With Pro Tools Written By Andy Avgousti (MPC-Tutor) Copyright Andy Avgousti 2011 Published by MPC-Samples.com 2011 All rights reserved. No part of this book, nor any of its associated

More information

Drum Machine Manual V1.2.0

Drum Machine Manual V1.2.0 Drum Machine Manual V1.2.0 Rugged Circuits and Wusik Dot Com 2011 Welcome to Beat707 Arduino Shield This board requires an Arduino Board plugged on the bottom of the Beat707, you can also use a NetDuino

More information

ver. 2.4 Operation Manual

ver. 2.4 Operation Manual ver..4 Operation Manual 07 ZOOM CORPORATION Copying or reproduction of this document in whole or in part without permission is prohibited. Contents Introduction 3 Copyrights 3 Main Screen 4 Landscape mode

More information

Scythe Synthesizer for iphone

Scythe Synthesizer for iphone Scythe Synthesizer for iphone http://www.bitmaskstudio.com/ https://twitter.com/bitmaskstudio Scythe is a polyphonic wavetable synthesizer which can load custom sounds and has a Wavetable Creator tool.

More information

VirtualDJ 8 Pioneer DDJ-SR 1

VirtualDJ 8 Pioneer DDJ-SR 1 VirtualDJ 8 Pioneer DDJ-SR 1 Table of Contents A. INSTALLATION... 3 Firmware & Drivers... 3 VirtualDJ 8 Setup... 3 Advanced Setup... 4 PAD PLUS mode... 4 B. MIXER... 5 C. DECKS... 7 D. EFFECTS... 9 E.

More information

SH-2. PLUG-OUT Software Synthesizer Owner s Manual

SH-2. PLUG-OUT Software Synthesizer Owner s Manual SH-2 PLUG-OUT Software Synthesizer Owner s Manual Copyright 2014 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND

More information

Versa Mix. User Guide and Reference Manual Charter Street Los Angeles Ca /07

Versa Mix. User Guide and Reference Manual Charter Street Los Angeles Ca /07 Versa Mix User Guide and Reference Manual 2/07 4295 Charter Street Los Angeles Ca. 90058 www.americanaudio.us Introduction Congratulations and thank you for purchasing the American Audio Versa Mix. Versa

More information

SOUND BROWSER SYSTEM PROTOTYPES SOUND FILE WINDOW. Click to update the list when files or directories have been added or removed by other programs.

SOUND BROWSER SYSTEM PROTOTYPES SOUND FILE WINDOW. Click to update the list when files or directories have been added or removed by other programs. Each Sound in the list that is preceded by a cyan arrow (->) performs processing on an input (the replaceable input). These Sounds come with a default input, but a replacement input can be substituted

More information

Table of Contents. Toolbar Inspector Browser Editors Panels... 51

Table of Contents. Toolbar Inspector Browser Editors Panels... 51 This user guide describes some of the main features in the MPC 2.0 beta software release. This is a work in progress. This beta release can be controlled by MPC X, MPC Live, and MPC Touch. Support for

More information

QUICKSTART GUIDE ENGLISH

QUICKSTART GUIDE ENGLISH QUICKSTART GUIDE ENGLISH WWW.AKAIPRO.COM BOX CONTENTS LPK25 USB cable Software CD SOFTWARE CD Safety Instructions & Warranty Information PC Users: To install the Akai Professional LPK25 Editor, open the

More information

Supplemental Notes March 10, 1999 SN79 V1.0. The Basics of MIDI

Supplemental Notes March 10, 1999 SN79 V1.0. The Basics of MIDI && Supplemental Notes March 10, 1999 SN79 V1.0 The Basics of MIDI For electronic music aficionados, MIDI (Musical Instrument Digital Interface) has opened doors to new worlds of creativity. Before MIDI,

More information

BR-800 Rhythm Editor Manual

BR-800 Rhythm Editor Manual BR-800 Rhythm Editor Manual Copyright 00 BOSS Corporation All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS Corporation. * Microsoft

More information

Contents. Overview...3. Song Editor Clip Editor Browser and Rytmik Cloud Keyboard Controls Support Information...

Contents. Overview...3. Song Editor Clip Editor Browser and Rytmik Cloud Keyboard Controls Support Information... User Manual Contents Overview...3 Song Editor...4 Clip Library...4 Song Playback...4 Tracks...5 Export...5 Clip Editor...6 Note Sequence...6 Instrument...7 Instrument Effects...7 Tempo Setting...8 Other

More information

KORG KROME Music Workstation - Product Specifications

KORG KROME Music Workstation - Product Specifications KORG KROME Music Workstation - Product Specifications Keyboard KROME-73 System 73-key: Natural Touch Semi Weighted keyboard *velocity sensitive is supported, after touch is not supported *Standard C1 -

More information

Hardware Control Reference

Hardware Control Reference Hardware Control Reference Disclaimer The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described

More information

USAGE AND SAFETY PRECAUTIONS

USAGE AND SAFETY PRECAUTIONS OPERATION MANUAL USAGE AND SAFETY PRECAUTIONS USAGE AND SAFETY PRECAUTIONS SAFETY PRECAUTIONS In this manual, symbols are used to highlight warnings and cautions for you to read so that accidents can be

More information

About this manual The manuals and how to use them Conventions in this manual References to the KROME Abbreviations for the manuals: QS, OG, PG, VNL

About this manual The manuals and how to use them Conventions in this manual References to the KROME Abbreviations for the manuals: QS, OG, PG, VNL Operation Guide E 4 Thank you for purchasing the Korg KROME Music Workstation. To help you get the most out of your new instrument, please read this manual carefully. About this manual The manuals and

More information

Installation & User Guide

Installation & User Guide Installation & User Guide Contents Vintage Organs: Introduction 3 Install: MPC Live & MPC X 4 Install: MPC Software Expansion Browser 7 Install: MPC Ren/Studio Controller Mode 9 Usage: Playing Instruments

More information

Instruction Manual. Astro-AXS580DS

Instruction Manual. Astro-AXS580DS Instruction Manual Astro-AXS580DS 1 Congratulations! We at Astro Drums would like to congratulate you on the purchase of the Astro AXE580DS Electronic drum kit. The included module, the AXE800DM, is designed

More information