Magnetically Actuated Safety Interlock Switches
|
|
- Thomasina Knight
- 5 years ago
- Views:
Transcription
1 Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic, stainless steel or brass to satisfy most application requirements NEMA enclosure enables the switches to withstand high pressure steam cleaning (MA 3,, are NEMA ) Variety of terminations select from various cable lengths or terminal strip termination for easy installation. Brad Harrison connector available on selected models. Long life the safety interlock switches are designed for a minimum of one million actuations 331 in mm 20V AC 2A IP Made in the U.K. 0. in mm Made in the U.K. Misalignment tolerant the non-contact actuation of the switches makes them very tolerant to misalignment of up to 0.39 inches (10 mm) E Go to the Engineering Guide in this catalog for in-depth information on safety standards and use of this product. Tel. 1/10/ //10-3 E3 Tel
2 Operation Operating Principle Mounting Examples Contact Arrangement Safety contact operating distance: Make 12 mm, Break 23 mm Encapsulated in the is a unique high-power industrial reed, capable of switching up to 1A, which is de-rated by a non-resetable overload protection circuit depending on switch type. On presenting the actuator to the switch, the high intensity magnetic field from the actuator causes the contacts to close. On removing the actuator (opening the door), the safety contacts open, isolating the machine. MA-1 MA-2 MA-20 MA-21 MA-1, 2, 20, 21 and MA-S MA-3 MA- MA- MA-3,, MA- MA-9 MA-10 MA-, 9, 10 MA-1A MA-1A Actuator Door 1 Switch Min 0mm Switch Actuator Door 2 It is advisable, where possible, to mount the switch and actuator on non-ferrous materials otherwise it may affect the oeprating distances. 2mm Applications Typical applications are on sliding guard doors or swinging guard doors. Door Closed, Machine RUN Door Open, Machine STOP, Door Covering Switch 2mm SLIDING DOOR No access to switch thus preventing attempts to defeat the interlock SLIDING DOOR Wherever possible the units should be mounted so that no access can be obtained to the switch when the guard door is open, thus preventing attempts to defeat the safety system. For the Latest Information Try Our Fax Back System at 1/91/31- On the Internet: sales@sti.com Tel. 1/10/ //10-3 E3 Tel
3 Specifications Electrical All Models Except As Indicated Safety Contacts: AC only 1N/C (MA-1, -, 10, -1AB, -1AS) 2N/C (MA-21A, -S) Safety Contact Operating Distance: DC only 1N/C (MA-9, -S) 2N/C (MA-20D, 21D, -S) Make 0.in., Break 0.91 in. (12 mm 23 mm) Auxiliary Contacts: 1N/O (MA-2,, 21, -S) 1N/C (MA-3) Aux. Contact Operating Distance: MA-2,, 21, -S Make 0.1 in., Break 0.39 in. (13 mm 10 mm) MA-3 Make 0.3 in., Break 0.9 in. (21 mm 2 mm) Rated Voltage: MA VAC All models except MA VAC DC models 2 VDC Rated Current: MA-3 3A, fuse externally 2.A quick acting AC accept MA-3 2A, fuse externally 1.A quick acting DC models 1A, fuse externally 00mA quick acting Initial Contact Resistance: Safety Contacts: 1m Ω Auxiliary Contacts: Initial Capacitance: Safety Contacts: Auxiliary Contacts: 10m Ω 0. pf 0 pf Electrical Life: 1 x 10 Mechanical Special Safety Reed Safety Aux. Closing time: 3.0 ms 0. ms Drop-out time: 2.1 ms 0.3 ms Bounce time: 0. ms 0. ms Shock: 0 G 100 G Vibration: Mechanical Mounting: Mounting Hardware: Case Material: Actuator Material: Wiring Connection: Weight: Color: 1 Gs, 10 to 200 Hz Any position Mechanical Life: 10 x 10 2 x M screws (MA) 2 x M3 screws (MA-1A) Molded ABS (MA), Stainless Steel (MA-S) Brass or Stainless Steel (MA-1) Molded ABS (MA), Stainless Steel (MA-S) Painted (MA-1), Alnico available as replacement Various lengths or Brad Harrison Connector (Micro-Change, R series, pole male, M12 threads) 1 oz (3 g) (MA); 2lb. oz (101 g) (MA-1A); and 1lb. oz. (00g) (MA-S) Red (MA models), Stainless Steel (MA-S) Brass or Stainless Steel (MA-1A) Environmental Protection: NEMA (IP) (MA-3, -, -) Operating Temperature: NEMA (IP) (MA except -3, -, -) (IP for MA-S) -1 F to 1 F (-10 C to 0 C), MA-1-1 F to F (-10 C to C), all except MA-1, -1 F to 212 F (-10 C to 100 C) MA-S models Cleaning: May be high pressure steam cleaned (NEMA only) Specifications are subject to change without notice. Note: The safety contacts of the STI switches are described as normally closed (N/C) i.e., with the guard closed, actuator in place, and the machine able to be started. E Go to the Engineering Guide in this catalog for in-depth information on safety standards and use of this product. Tel. 1/10/ //10-3 E3 Tel
4 Application Diagram 2VAC/DC K1 (AUX) START MOMENTARY PUSH BUTTON K2 (AUX) K3 (AUX) L1 L2 L3 L1 L2 L3 L1 L2 L3 STOP MOMENTARY PUSH BUTTON K1 GUARD CLOSED BLUE FUSE MA SERIES INTERLOCK SR0A A1 X K2 K3 EB SERIES LATCHING E-STOP BUTTON BROWN A2 X AUXILIARY CIRCUIT (ALARM OR INDICATION) FUSES K1 K2 K3 Typical Application of with a Safety Monitoring Relay See page A91 for a full explanation of the circuit operating principle and fault detection. CONTACT PROTECTION e.g. THERMAL CUT OUT M CONTACT PROTECTION e.g. THERMAL CUT OUT M CONTACT PROTECTION e.g. THERMAL CUT OUT M For the Latest Information Try Our Fax Back System at 1/91/31- On the Internet: sales@sti.com Tel. 1/10/ //10-3 E39 Tel
5 Dimensions Ordering MA-1, 2, 20, MA-, 9, MA-3,, & 2 HOLES THROUGH MA-1AB or -1AS MA-S Model Contacts Wiring Entry Part No. MA-1APC2 (AC only) 1 N/C 2 meter cable, pre-wired MA-1APC (AC only) 1 N/C meter cable, pre-wired MA-1APC (AC only) 1 N/C meter cable, pre-wired MA-1APC (AC only) 1 N/C meter cable, pre-wired MA-1APC10 (AC only) 1 N/C 10 meter cable, pre-wired MA-2APC2 (AC only) 1 N/C & 1 N/O 2 meter cable, pre-wired MA-2APC (AC only) 1 N/C & 1 N/O meter cable, pre-wired MA-2APC (AC only) 1 N/C & 1 N/O meter cable, pre-wired MA-2APC10 (AC only) 1 N/C & 1 N/O 10 meter cable, pre-wired 0-00 MA-2APC1 (AC only) 1 N/C & 1 N/O 1 meter cable, pre-wired 0-00 E Go to the Engineering Guide in this catalog for in-depth information on safety standards and use of this product. Tel. 1/10/ //10-3 E0 Tel
6 Model Contacts Wiring Entry Part No. MA-2APC20 (AC only) 1 N/C & 1 N/O 20 meter cable, pre-wired 0-00 MA-2APCC (AC only) 1 N/C & 1 N/O Connector, Brad Harrison MA-3APTC (AC only) 1 N/C & 1 N/C Terminal connections MA-APTC (AC only) 1 N/C & 1 N/O Terminal connections MA-APTC (AC only) 1 N/C Terminal connections MA-APC2 (AC only) 1 N/C 2 meter cable, pre-wired MA-APC (AC only) 1 N/C meter cable, pre-wired MA-APC (AC only) 1 N/C meter cable, pre-wired 0-00 MA-APC10 (AC only) 1 N/C 10 meter cable, pre-wired MA-APCC (AC only) 1 N/C Connector, Brad Harrison MA-9DPC2 (2VDC only) 1 N/C 2 meter cable, pre-wired MA-9DPC (2VDC only) 1 N/C meter cable, pre-wired MA-9DPCC (2VDC only) 1 N/C Connector, Brad Harrison MA-9APC2 (AC only) 1 N/C 2 meter cable, pre-wired MA-9APC (AC only) 1 N/C meter cable, pre-wired MA-9APC10 (AC only) 1 N/C 10 meter cable, pre-wired MA-10APC2 (110 VAC, 3A max) 1 N/C 2 meter cable, pre-wired MA-10APC (110 VAC, 3A max) 1 N/C meter cable, pre-wired MA-20DPC (2VDC only) 2 N/C meter cable, pre-wired MA-20DPCC (2VDC only) 2 N/C Connector, Brad Harrison MA-20APCC (AC only) 2 N/C Connector, Brad Harrison 0-00 MA-21DPC2 (2VDC only) 2 N/C + 1 N/O 2 meter cable, pre-wired MA-21DPC (2VDC only) 2 N/C + 1 N/O meter cable, pre-wired MA-21DPC (2VDC only) 2 N/C + 1 N/O meter cable, pre-wired MA-21DPC10 (2VDC only) 2 N/C + 1 N/O 10 meter cable, pre-wired MA-21APC2 (AC only) 2 N/C + 1 N/O 2 meter cable, pre-wired MA-21APC (AC only) 2 N/C + 1 N/O meter cable, pre-wired MA-21APC (AC only) 2 N/C + 1 N/O meter cable, pre-wired MA-21APC10 (AC only) 2 N/C + 1 N/O 10 meter cable, pre-wired MA-1ABC2 Brass (AC only) 1 N/C 2 meter cable, pre-wired MA-1ASC2 Stainless Steel (AC only) 1 N/C 2 meter cable, pre-wired MA-S2ASC3 (AC only) 1 N/C + 1 N/O 3 meter cable, pre-wired MA-S2DSC3 (DC only) 1 N/C + 1 N/O 3 meter cable, pre-wired MA-S20ASC3 (AC only) 2 N/C 3 meter cable, pre-wired MA-S20DSC3 (DC only) 2 N/C 3 meter cable, pre-wired MA-S21ASC3 (AC only) 2 N/C + 1 N/O 3 meter cable, pre-wired 0-00 MA-S21DSC3 (DC only) 2 N/C + 1 N/O 3 meter cable, pre-wired 0-00 Spare Actuator (1 & 20, 21) Spare Actuator (, 9 & 10) Spare Actuator (MA-1AB/S, Alnico) Spare Actuator (MA-1AB/S, Painted) Spare Actuator (MA-S, Stainless Steel) 0-00 Accessories (see page E1) For the Latest Information Try Our Fax Back System at 1/91/31- On the Internet: sales@sti.com Tel. 1/10/ //10-3 E1 Tel
Magnetically Actuated Safety Interlock Switches
Rev. 7.07 C US Conforms to EN1088, EN292, EN6020-1 CSA approved MA Series Magnetically Actuated Safety Interlock es Large selection choose from a large selection of contact configurations housed in plastic
More informationSafety Contacts: AC models MA-1 thru 5, 10, 12, 13, 16 1 N/C MA-13, 16, 21 2 N/C DC models MA-12, 13, 14, 16 1 N/C MA-13, 15, 16, 20, 21 2 N/C
r Safety Interlock Switches MA Series MA Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic to satisfy most application
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches MA Series MA For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Magnetically Actuated Safety
More informationVersatile Safety Interlock Switch with Guard Door Locking
R Conforms to EN1088, EN60947-5-1, EN292, EN60204-1 UL and C-UL listed, BG approved Versatile Safety Interlock Switch with Guard Door Locking High locking force of 450 pounds locks guard door shut until
More informationSafety Interlock Switches
r Safety Interlock Switches Compact Universal Tongue- Operated Safety Interlock Switch Strong and versatile the compact size of the strong, glass-filled polyester housing can be used in many applications
More informationCompact Coded Magnetic Safety Interlock Switch and Control Units
C Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 UL and C-UL listed, TUV certified Description R US Compact Coded Magnetic Safety Interlock Switch
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
R Safety Interlock Switches TL8012-S TL8012 For full product information, visit www.sti.com. Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page. Versatile Safety Interlock
More informationFor full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
More informationCM Series. Most Diverse and Flexible Line of Coded Magnetic Safety Interlock Switches and Controllers. Description. Safety Interlock Switches
R Safety Interlock Switches CM Series CM For full product information, visit www.sti.com. Use the SpeedSPEC Code for quick access to the specific web page. Most Diverse and Flexible Line of Coded Magnetic
More informationSafety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR101A I-12 SR103AM I-13 SR104P I-17 SR105E I-17 SR106ED I-21 SR108AD & SR109AD I-18 SR120MP I-21 SR125SMS45 I-22
More informationUniversal Tongue-Operated Safety Interlock Switch
Rev. 12.07 C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed, B approved T12 Universal Tongue-Operated Safety Interlock Switch Strong and versatile the compact size of the strong,
More informationRemote access to status, test and reset functions. Built-in diagnostic indicators. Options Lid-mounted reset key switch (MC4)
File no. LR90200 Description mats and edges MC3, MC4 and Safety Mat Controllers Both metal enclosure and DINrail mount models available Control reliable Remote access to status, test and reset functions
More information24 VDC or 24 VAC/DC or 110 VAC or 220 VAC NOTE: 220 VAC not available for S2 and S3 configurations. EN1088, EN , EN292, EN
Safety Interlock Switches TL8012-S Versatile Safety Interlock Switch with Guard Door Locking High locking force of 2000 N (450 lb.) locks guard door shut until machine is safe to enter NEMA 6 enclosure
More informationSafety Door Switches. Contents. Selection Guide F-2. Tongue Switches D4NS F-6 T5009 & T F-14 T4012 F-20 T4016 F-20 T2008 F-21 D4GS-N F-26
Safety Do Switches Contents Selection Guide F-2 Tongue Switches D4NS F-6 T5009 & T5009-6 F-14 T4012 F-20 T4016 F-20 T2008 F-21 D4GS-N F-26 Guardlocking Switches D4SL-N F-27 D4NL F-45 TL4019 F-55 TL4024
More informationMagnetic Style Safety Interlock Switches
Non-contact safety interlock switches are the best choice for washdown applications; the switch components are sealed and rated NEMA 4X, IEC IP67 Tolerant of dirt buildup, sensing distance, and alignment
More informationTongue Switches Trojan 5 & 6
Interlock Switches Description The Trojan family is a universal tongue (or key) actuated safety interlock switch designed to fit at the leading edge of sliding, hinged or lift-off guards. The dual key
More informationCompact Magnetic Non-contact Safety Switches. Model Number Structure
Compact Non-contact Safety Switches Coded Non-contact switches are designed to interlock hinge, sliding or removal guard doors. All coded Non-contact switches have a LED for easy diagnosis. Coded actuator
More informationMA Series. Safety, Technology & Innovation. Description. Approvals. Operation. Applications. Declaration of Conformity
, Technology & Innovation MA Series Operating Instructions for MA-11 Switches KEEP THIS GUIDE FOR FUTURE REFERENCE This information is designed to help suitably qualified personnel install and operate
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationSR A series coded magnetic safety sensor
SR A series coded magnetic safety sensor Selection diagram CONTACTS 0 +NO NC+NO Contact states are displayed for closed guard ACTUATOR SENSOR SM A0N Actuation distance 5 mm OUTPUT TYPE SR AD N PVC cable
More informationTongue Switches Visit our website: Interlock. Switches. Safety Switches. Trojan 5 & 6. Specifications.
1-2 -Interlock Safety 4 Description The Trojan family is a universal tongue-operated (or key-operated) safety-interlock switch designed to fit at the leading edge of sliding, hinged or lift-off guards.
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationMagnetic Non-contact Safety Switches. Model Number Structure
Magnetic Non-contact Safety Switches Reed non-contact switches monitor the status of guarding doors. Stainless steel housing for high hygiene demands in the food industry are available. Based on reed technology
More informationMachine Safety. Products
January 23 Vol. 2, Ref. No. [1263] -1 Machine Safety Products Contents Description Page............................................. -2 Key Interlock Switches DIN Models.............................. -9
More informationTechnical data. Safety parameters: see page 333. DC maximum residual ripple: 10% Supply voltage tolerance: DC consumption: Control circuit
Safety module CS DM-01 Technical data Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94 Protection degree IP40 (housing), IP20 (terminal strip) Dimensions see page 283, design A Two-hand
More informationCompact Magnetic Non-contact Safety Switches. Model Number Structure
Compact Non-contact Safety Switches FS-TGR-N@C Coded Non-contact switches are designed to interlock hinge, sliding or removal guard doors. All coded Non-contact switches have a LED for easy diagnosis.
More informationDatasheet - SRB 301LC/B-24V
27.01.2016-00:27:16h Datasheet - SRB 301LC/B-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301LC/B Fit
More informationSR B series coded magnetic safety sensors
SR B series coded magnetic safety sensors Selection diagram CONTACTS 0 NC NC+NO NC+NO Contact states are displayed for closed guard SENSOR ACTUATOR OUTPUT TYPE SM B0F Actuation distance mm SM B0F Actuation
More information194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure
More informationDatasheet - SLB 200-C04-1R
14.02.2013-17:06:30h Datasheet - SLB 200-C04-1R Safety light barriers / Safety monitoring modules to monitor safety light barriers / SLB 200-C Up to 2 light barrier pairs SLB 200 can be connected 1 safety
More informationthe Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationDatasheet - BNS ZG-ST
22.08.2014-04:52:01h Datasheet - BNS 300-01ZG-ST Safety sensors / BNS 300 Preferred typ thermoplastic enclosure Long life no mechanical wear Ø M30 Suitable for food processing industry Insensitive to transverse
More informationManually Operated Bolt Safety Interlock Switch. NEMA 6 enclosure enables the BL6009 switch to withstand water washdown cleaning
C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed BL6009 Manually Operated Bolt Safety Interlock Switch n uard locking manually operated bolt requires up to 20 seconds to retract,
More informationEx magnetic safety sensors, cylindrical form // Series EEx RC Si M30
Ex magnetic safety sensors, cylindrical form // Series EEx RC Si M30 - Ex zone 1 and 2, as well as 21 and 22 - Metal enclosure - Available in stainless steel enclosure - Reed contacts, coded - Actuation
More informationSafety Monitoring Relays
Safety Monitoring Relays G9SA G9SA Safety Relay Unit Four kinds of 45-mm wide units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a two-hand controller.
More informationSafety coded magnetic sensor SR A series
Safety coded magnetic sensor SR A series Selection diagram CONTACTS 0 +NO NC+NO Contacts imply closed protection ACTUATOR SENSOR SM A0N actuation distance 5 mm OUTPUT TYPE SR AD N integrated PVC cable
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS FR FX FK FW 5 6 7 11 1 14 NC NC snap action snap
More informationInterlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches
HSA-DMC Magnetic Safety Switches Key features: Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size ( 16 51mm) Positioning for
More informationPanel Mount Tachometer, T6
Model T6, Panel Mount Tachometer Features Front programmable Field adjustable parameters Programmable Scaling and Decimal Points 4-20ma Output Signal - Internally Powered by the T6 or Externally Powered
More informationSafety Mats & Area Guarding
Safety Mats & Area Guarding MC Controllers MC MC, MC and MC Series Safety Mat Controllers The MC Series safety mat controllers are used in conjunction with a four-wire, normally open, safety mat where
More informationBNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS
BNS SERIES - COMPATIBLE SERIES AES SAFETY CONTROLLERS SELECTION CHART AVAILABLE STANDARD MODELS Safety Controller Suitable for use with Coded-Magnet Sensor Part Numbers below BNS250... BNS33... BNS303...
More informationBulletin 800Z Zero-Force Touch Buttons
Bulletin 800Z Zero-Force Touch Buttons IEC and NEMA Style General Purpose Range Heavy Industrial Range Protection Class 4/4X/3 and 4/3 IP66 Internationally Rated Ergonomically Designed Touch Buttons Table
More informationElectronic monitoring relays PMDsrange
Unit features Altdaten CMT For DC and AC supplies Normally energised mode Fault latching or automatic reset Normal/test mode External reset button can be connected Description The insulation monitoring
More informationDatasheet SRB301ST 24V (V.2)
26.10.2016 05:03:31h Datasheet SRB301ST 24V (V.2) Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301ST Suitable
More informationSafety switches with separate actuator
A Safety switches with separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS CONTACT BLOCKS 9 snap action overlapped FD FP FL FC 21 22 33 3 3NC 2NO+1NC 1NO+ CONDUIT
More information22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
More informationSafety switches with separate actuator
4 Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD VF KEYD6 VF KEYD VF KEYD10 ACTUATORS CONTACT BLOCKS 6 snap action overlapped FR FX FK FW 0 1 4 NC NO+1NC
More informationDatasheet - AZ 16-02ZVRK-ST
25.02.2016-17:57:11h Datasheet - AZ 16-02ZVRK-ST Safety switch with separate actuator / AZ 16 Preferred typ Thermoplastic enclosure Double-insulated Large wiring compartment 52 mm x 90 mm x 30 mm Multiple
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationSafety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
More informationDatasheet - AZ 16-02ZVK
Print - Create PDF - Create EXCEL file - Hide system components 03.10.2011-10:28:14h Datasheet - AZ 16-02ZVK Safety switch with separate actuator / AZ 16 Image Preferred typ 3 cable entries M 16 x 1.5
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Compact Limit Switch Style with Universal Supply FET output allows for solid state switching of AC or DC Universal AC/DC power supply Choose cable or connector types
More informationSensaGuard. Description. Features. Benefits. Specifications
SensaGuard Description When it comes to machine safety, Rockwell Automation knows that protection of personnel and equipment is your main concern. At the same time, flexibility and productivity are points
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 7 safety contacts (N/O), instantaneous 2 auxiliary contacts (N/C),
More informationTechnical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More information02/11/2015
DIN Rail Mount 22.5 mm ETM2 Part number 84874023 Version ETM : Controls temperature of machines using built-in PTC probes Line break or probe short-circuit detection Version ETM2 / ETM22 : Fault latching
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 5 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Connection
More informationD6030S - D6030D INSTRUCTION MANUAL. D SIL 3 Switch/Proximity Detector Repeater Relay Output. Models D6030S, D6030D
D600S - D600D INSTRUCTI MANUAL SIL Switch/Proximity Detector Repeater Relay, DIN Rail, Models D600S, D600D D600 - SIL Switch/Proximity Detector Repeater Relay G.M. International ISM0- Characteristics General
More informationSafety Products Introduction LS-Titan Safety Interlock Switches. Technical Reference... 2
Key Interlock Switch Door-Flap Switch Door-Hinge Switch.0 Introduction Technical Reference............................................ 2.1 Learn Online Product Description.............................................
More informationSpecial-Purpose Proximity Sensor E2C
Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing
More informationSERIES AZ15/16. Tamper-Resistant Movable Machine Guard Safety Interlock Switch. Features & Benefits. Description. Operation. Typical Applications
SERIES AZ15/ Tamper-Resistant Movable Machine Guard Safety Interlock Switch The Series AZ15/ is designed for use with movable machine guards/access gates which must be closed for operator safety. Their
More informationDatasheet - AZ 16-03ZVRK
23.07.2015-02:06:20h Datasheet - AZ 16-03ZVRK Safety switch with separate actuator / AZ 16 Preferred typ Thermoplastic enclosure Double-insulated Large wiring compartment 52 mm x 90 mm x 30 mm Multiple
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationDatasheet - AZM300Z-ST-1P2P-A
08.04.2015-16:04:56h Datasheet - AZM300Z-ST-1P2P-A Solenoid interlock / AZM300 Suitable for mounting to profile systems Thermoplastic enclosure 3 different directions of actuation Compact design 3 LEDs
More informationSpecifications. Functional Safety Data Note: For up-to-date information, visit Certifications.
Safety Non-Contact General 1-2-Opto-electronics 3-Interlock Logic Description When it comes to machine safety, Rockwell Automation knows that protection of personnel and equipment is your main concern.
More informationDatasheet - SRB 402EM-24V
Print - Create PDF - Create EXCEL file 20.04.2011-18:31:35h Datasheet - SRB 402EM-24V Output expanders / SRB 402EM Expander module for contact expansion 4 safety contacts, STOP 0 2 Signalling outputs (Minor
More informationDatasheet - AZ 16ZVRK
Print - Create PDF - Create EXCEL file - Hide system components 21.04.2011-12:09:14h Datasheet - AZ 16ZVRK Safety switch with separate actuator / AZ 16 thermoplastic enclosure Double-insulated Large wiring
More informationDatasheet - RSS 36-D-R-ST
14.03.2018-19:30:37h Datasheet - RSS 36-D-R-ST Safety sensors / RSS 36 Thermoplastic enclosure RFID-technology for needs-based protection against tampering Misaligned actuation possible 27 mm x 108.2 mm
More informationTechnical data. Housing Polyamide housing PA 66, self-extinguishing V0 acc. to UL 94. Supply Rated supply voltage (U n
Safety module CS AT 0 Module for emergency stops, end position monitoring for movable guards with delayed contacts at the opening of the input channels, semiconductor outputs (e.g. light barriers and magnetic
More informationSpecifications. Description. Degree of Protection. Input Voltage (Relay type) Input Voltage (Solid-State type) Electrical Design Life (Relay type)
General Principles 9-10-Safety Logic Power General Purpose 800Z-GF2Q5 Heavy Industrial 800Z-HF1 General Purpose 800Z-GL3Q5B Heavy Industrial 800Z-HL1Y Bulletin 800Z Zero-Force are designed for use by machine
More informationMain contacts Auxiliary contact Number of input channels Rated voltage Model Category 24 VAC/VDC 3PST-NO SPST-NC 1 channel or 2 channels possible
Safety Relay Unit Four kinds of -mm wide Units are available: A -safety contact model, a -safety contact model, and models with safety contacts and OFF-delay safety contacts. Also available are 7.-mm wide
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
More informationCS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
More informationThermal-Magnetic Circuit Breaker 4220-T...
Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC 60934 (6kA) and UL 077 (5 ka). With
More informationSALES NUMBER NUMBER OF BEAMS PROTECTIVE HEIGHT
SECTION 21 182 Safety Light Curtains Type: SLC-F Finger (14mm) FEATURES: Resolution: 14mm Protective height: 160mm to 1040mm Type 4 according to IEC61496-1 and -2 ORDERING INFORMATION: SALES OF BEAMS PROTECTIVE
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationCoded magnetic safety sensor SR B series
Coded magnetic safety sensor SR B series Selection diagram CONTACTS 0 NC NC+NO NC+NO Contacts imply closed protection ACTUATOR SENSOR OUTPUT TYPE SM B0F actuation distance mm SM B0F actuation distance
More informationMSR 2400R. Rugged Power System for Military and Heavy Duty Applications
MSR 2400R Rugged Power System for Military and Heavy Duty Applications 2400 W modular power system Power supply or battery charging systems Parallel n+1 connection, up to 90A Series connection, up to 360VDC
More informationGuard Mode. Machine Test Signal. MPCE Checking. Remote Function Access. Status and Diagnostic indicator lights visible on controller enclosure lid
MicroSafe File No. LR90200 Description MicroSafe Ultra-compact transmitter and receiver 1 x 1.25 inches (25 x 32 mm) 0.8 inch (20 mm) resolution 29.5 foot (9 m) range Protected heights from 8 to 48 inches
More informationSafe timer relay/contact expansion modules
Contact expander module for increasing the number of available contacts, Pulse-on timer relay for step-by-step control of movement sequences, Delay-on energisation timer for unlocking an interlock with
More informationDatasheet - AZ 15 ZVRK
22.02.2016-18:22:40h Datasheet - AZ 15 ZVRK Safety switch with separate actuator / AZ 15 Preferred typ Thermoplastic enclosure Double-insulated Long life 52 mm x 75 mm x 30 mm Multiple coding Large wiring
More informationPush Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
More informationHigh Voltage DC Meter
High Voltage DC Meter Javelin D PD644 0-300 VDC input NEMA 4X, IP65 front Scale in engineering units Sunlight readable LED display 4-20 ma analog output Two form C 3 A relays option RS-485 serial communications
More informationTecnología en Electrónica y Control SRL Ficha Técnica
Tecnología en Electrónica y Control SRL Ficha Técnica Relé de seguridad Tecnología en Electrónica y Control SRL Oficina Central Wüthrich 949 San Carlos Centro (S3013DES) / Santa Fe / Argentina Tel./Fax/Líneas
More informationDisconnect Switches. Safe Switching and Disconnecting
IB105-UK_U1_U4_Pfade.indd 2-3 14.04.2005, 16:51:30 Disconnect Switches Safe Switching and Disconnecting Disconnect Switches from Salzer are hand-operated switchgear for main circuits and are offered as
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationDatasheet - AZ 15 ZVK
Print - Create PDF - Create EXCEL file - Hide system components 20.03.2012-18:27:07h Datasheet - AZ 15 ZVK Safety switch with separate actuator / AZ 15 Image Preferred typ thermoplastic enclosure Double-insulated
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More information194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable f padlocks) E-FA Painted Steel Enclosure
More informationonlinecomponents.com
R General-Purpose Fiber-optic Sensor Compact Limit Switch Style with Universal Supply H FET output allows for solid state switching of AC or DC H Universal AC/DC power supply H Choose cable or connector
More informationNon-contact Machine Safeguarding with RFID Technology. LED offers diagnostics for switch status, margin alignment, and fault finding
Interlock SensaGuard Non-Contact 440N RFID unique (high) or standard (low) coded actuators PLe Cat 4 per ISO 3849- (safety performance is maintained when connected in series) Flat pack and barrel (plastic
More informationArticle no. BWU2045: AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input 1.23 NC
Safety + standard I/O in one module AS-i Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category
More informationThermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
More informationDatasheet - AZ 15 ZVRK
24.12.2015-09:51:40h Datasheet - AZ 15 ZVRK Safety switch with separate actuator / AZ 15 Preferred typ Thermoplastic enclosure Double-insulated Long life 52 mm x 75 mm x 30 mm Multiple coding Large wiring
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
More informationCoded Non-Contact Safety Sensor Eden OSSD
Coded Non-Contact Safety Sensor Eden OSSD Approvals: Application: Door and hatches Position control Sector detection Features: Non-contact detection, 0-15 mm OSSD outputs and inputs for serial connection
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More information