MPO-120S Series. Single Output, 180W Compact, Open Frame AC/DC Power Supplies. Key Features:
|
|
|
- Beverly Maxwell
- 5 years ago
- Views:
Transcription
1 MPO-120S Series Single, 180W Compact, Open Frame AC/DC Power Supplies Key Features: 180W Power Universal AC Power Factor Correction EN Approved High Efficiency Five Single Models Meets EN B >120 khour MTBF MicroPower Direct 292 Page Street Suite D Stoughton, MA USA T: (781) F: (781) E: sales@micropowerdirect.com W: Electrical Specifications Specifi cations +25 C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice. Voltage Range Universal VAC VDC Frequency Hz Current Inrush Current Cold Start, 115 VAC 30.0 Cold Start, 230 VAC 60.0 A Pk Power Factor Correction, See Note VAC VAC 0.95 W/VA Safety Ground Leakage Current 0.50 ma Voltage/Current Voltage Accuracy ±2.0 % Line Regulation VIN = Min to ±1.0 % Load Regulation IOUT = 5% to 100% ±1.0 % Ripple & Noise (20 MHz), See Note 2 Hold-Up Time 115 VAC 15 msec Temperature Coefficient ±0.03 %/ C Over Voltage Protection >125% VOUT (Autorecovery) Overload Protection See Note %IOUT Short Circuit Protection Continuous (Autorecovery) General Isolation Voltage 4,000 VAC to 5,656 VDC to Ground 2,000 VAC to Ground 500 Switching Frequency 65 khz EMI Characteristics Parameter Standard Criteria Level Radiated Emissions EN B Conducted Emissions EN B Noise Immunity (EMS) EN Surge EN ±1 kv (L-N) ±2 kv (L-FG & N-FG) Environmental Operating Temperature Range Ambient C Storage Temperature Range C Cooling Free Air Convection (See Derating Curve) Humidity RH, Non-condensing 95 % Physical Size See Mechanical Drawings (Page 4) Weight 5 VOUT Model Oz (350g) All Other Models 9.87 Oz (280g) Reliability Specifications MTBF MIL HDBK 217F, 25 C, Gnd Benign 120 khours Safety Standards UL 1950, EN (except 5 & 15 VOUT models) Vibration 10~500 Hz, 2G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis
2 Model Selection Guide Model Number Current (A) 115 VAC 230 VAC Voltage (VDC) W/0 For U-channel and enclosed models, see MPU-120S Datasheet Current (A) W/30 W/18 % Min. Power (W) Voltage Adjust Range (VDC) Ripple & Noise (mv) Capacitive Load (µf) MPO-120S-05Y , MPO-120S-12Y , MPO-120S-15Y , MPO-120S-24Y , MPO-120S-48Y , PFC meets EN Ripple and noise is measured at 20 MHz bandwidth using a 0.1 µf and a 47 µf capacitor connected in parallel as close to the power supply terminals as possible. 3. Overload protection is provided by a hiccup mode circuit. The unit recovers automatically when the fault condition is removed. 4. These units will operate at no load without damage. However they may not meet all specifi cations. The recommended minimum load is given in the model selection chart above. 5. Each unit includes an input fuse. Since this fuse is not fi eld replaceable, it is recommended that an external fuse be used on the input of the power supply for protection. For these units, a 3A/250V slow blow fuse is recommended. Model Number Load vs Voltage Efficiency (%, Typ) Temperature Derating: MPO-120S-05 Temperature Derating: All Other Models Efficiency vs Load: MPO-120S-05 Efficiency vs VIN: MPO-120S-05 Page 2 MPD 292 Page Street Ste D Stoughton, MA TEL: (781) FAX: (781) sales@micropowerdirect.com
3 Efficiency vs Load: MPO-120S-12 Efficiency vs VIN: MPO-120S-12 Efficiency vs Load: MPO-120S-15 Efficiency vs VIN: MPO-120S-15 Efficiency vs Load: MPO-120S-24 Efficiency vs VIN: MPO-120S-24 Efficiency vs Load: MPO-120S-48 Efficiency vs VIN: MPO-120S-48 MicroPower Direct 292 Page Street Ste D Stoughton, MA TEL: (781) FAX: (781) sales@micropowerdirect.com
4 Mechanical Dimensions: 5V Model Anytek Connector: DG28S-B-03P: 3 terminals, 7.62 mm Centers Term. Function 5 -VOUT Connectors: Two PCB Terminals (Wire Lugs): PCB-50 (M5 Screws) All dimensions are typical in inches (mm) Tolerance x.xx = ±0.02 (±0.50) Mechanical Dimensions : 12, 15, 24 & 48V Models All dimensions are typical in inches (mm) Tolerance x.xx = ±0.02 (±0.50) Anytek Connector: DG28S-B-03P: 3 terminals, 7.62 mm Centers Connector (CN2): Anytek Connector: DG28S-B-04P: 4 terminals, 7.62 mm Centers 5 +VOUT 6 -VOUT 7 -VOUT Page 4 MPD 292 Page Street Ste D Stoughton, MA TEL: (781) FAX: (781) sales@micropowerdirect.com
5 OPTIONAL CONNECTOR - MOLEX TYPE * Not available for 5V output models Molex type connector: Alex Connector: 8673W pins, 2 Removed Mating Connector: 8639 type or equiv. Pin Function Connector (CN2): Molex type connector: Alex Connector: 8673W pins Mating Connector: 8639 type or equiv. Pin Function Pin Function 8 -VOUT 5 +VOUT 9 -VOUT 6 +VOUT 10 -VOUT 7 +VOUT 11 -VOUT OPTIONAL CONNECTOR - Clamp TYPE * Not available for 5V output models Clamp type connector: Anytek Connector: TI terminals, 7.5 mm Centers Connector (CN2): Clamp type connector: Anytek Connector: TI terminals, 7.5 mm Centers MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA TEL: (781) FAX: (781) sales@micropowerdirect.com Term. Function 5 +VOUT 6 -VOUT 7 -VOUT
MPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:
MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN
MPV1060RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1060RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 5W & 10W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse
MPV1560RI4. Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers. Key Features:
MPV1560RI4 Ultra Wide Input, Compact Industrial Grade, PV Power DC/DC Con vert ers Key Features: 15W Output Power 10:1 Input Range 4,000 VAC Isolation Meets EN 62109 Wide -40 C to +70 C Oper. Reverse Input
MB2000ERUI. High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers. Key Features:
MB2000ERUI High Isolation, 1 x 2 20W, 4:1 Input Range DC/DC Con vert ers Key Features: 20W Power 4:1 Input Voltage Range EN 60950 Approved 3,000 Isolation Efficiency to 90% Meets EN 55032 Compact 1 x 2
MI1000ERW. Series. Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers. Key Features:
MI1000ERW Miniature 1 x 1, 2:1 Input, 10W DC/DC Con vert ers Key Features: 10W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 Remote On/Off Control
VP ELECTRONIQUE MASSY - Tel
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
ML100SRI. Series. Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers. Key Features:
ML100SRI Ultra-Miniature, 1W High Isolation, SMT DC/DC Con vert ers Key Features: 1W Output Power Ultra-Miniature SMT Case 4,200 VDC Isolation Single & Dual Outputs -40ºC to +105ºC Operation Meets JEDEC
IG480RW. Series. High Isolation IGBT Driver DC/DC Con vert ers.
IG480RW High Isolation IGBT Driver DC/DC Con vert ers Key Features: Operates With xx962 Drivers 4.8W Output Power Independent Outputs 3,000 Isolation Miniature DIP Case >1.0 MHour MTBF Short Circuit Protection
Model No. ( Single Output ) ATC-3.3S ATC-5S ATC-12S ATC-15S ATC-24S Max Output Wattage (W) 10W 10W 10W 10W 10W VAC or VDC
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Output Low Ripple and Noise Screw Terminal For Optional CE, UL,
Ripple & Noise (max) (See Note 2) 5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
FEATURES 3 Year Warranty 100% Full Load Burn-In Tested Universal AC Input / Full Range Built-In Remote Sense Function Built-In Remote ON/OFF Control Current Sharing up to 2000W (3+1) Forced Air Cooling
< 50 A max. (115 VAC) / < 70 A max. (230 VAC)
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
Snaptec Australia Pty. Ltd.
KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A F 150 U S 12 B - Application Package Dimension Output Input Output Output Protection
Series AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
Series AME10-VZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon I/O Isolation 000VAC Continuous Short circuit protection Operating Temp: -0 C to + C Energy Star compliant Input: -VAC,
APM-40 SERIES FEATURES PRODUCT OVERVIEW. Model Selection Guide. Input Specifications. AC/DC Power Module 40W, Industrial & Medical Safety
FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting Package Dimension 88.9x63.5x30.0 mm (PCB Version)
Series AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
Series AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS MUI65 SERIES
AC-DC POWER SUPPLIES UNIVERSAL INPUT, 65 WATT MEDICAL APPLICATIONS 2MOPP Medical FEATURES Universal Input Range Operating Temperature Range: -25º to 80ºC (with derating) Compact Package: 2.00 3.00 1.16
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
Application Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
SPECIFICATIONS: PSAK650
FEATURES RoHS Compliant Power OK Signal (Power Good, Logic low) Intelligent LED Indicators Remote On/Off and Remote Sense Function High Efficiency up to 91% Forced Current Sharing at Parallel Operation
Series AME60-MJZ 60 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: I/O Isolation VAC Continuous Short circuit protection Input under-voltage protection Low
Output Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
Features. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter
Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 100 U S 12 B - Application Package Dimension Output Input Output Output Protection
Series AMER120-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMER120-AZ FEATURES: AC-DC Constant Current or Constant Over Current Protection Voltage LED Driver Short Circuit Protection Input range 90-305VAC/47-440Hz
Datasheet. ACF-10 Series AC/DC Power Module 10W
Datasheet ACF-10 Series AC/DC Power Module 10W The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for
12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features DIN Rail Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
POWERBOX Industrial Line PMR20W Series 20W 4:1 Single and Dual Output High Performance DC/DC Converter
Features 2250VDC input to output isolation Standard 2.00 x 1.00 x 0.40 inch Six-sided continuous shield UL60950-1, EN60950-1, & IEC60950-1 safety approvals Compliance to EN50155 and en45545-2 railway standard
Universal Power Supplies
, Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC
FDC20-48 S 05 W - HC PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC20-48 S 05 W - HC Series Name Input Output Output Input Assembly Option Voltage Quantity
Watts. xppower.com. General. Input. Environmental. EMC & Safety. Output. IT & Medical Approvals. Energy Efficiency Level V, CEC2008 & EISA 2007
AC-DC 85-50 Watts AHM Series IT & Medical Approvals xppower.com Energy Efficiency Level V, CEC008 & EISA 007
Series AM1S-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM1S-Z Models Single output Model Input Voltage (V) FEATURES: RoHS compliant Operating temperature -4 o C to + 85 o C 4 Pin SIP Package Input
Enclosed Power Supplies
, 15 150 Watt Features Very compact metal cased power supplies High operating temperature up to 70 C Low no load power consumption
SPECIFICATION. For SWITCHING POWER SUPPLY M/N: MPD-F113-V
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-V Revision History REV. Oct. 1 st 2012 REV. Dec. 6 th 2012 REV. Jun. 4 th 2013 REV. Nov. 25 th 2015 Established Revised EMS performance and added mechanical
Series AMEL20-AZ 20 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Industrial Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Efficiencies upto 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
SPECIFICATION M/N: MPD-F For SWITCHING POWER SUPPLY. Revision History
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F3- Revision History REV. Jan. 7 th 200 REV. Mar. 4 th 200 REV. Mar. 7 th 200 REV. Mar. 28 th 20 REV. Nov. 25 th 20 REV. Jul. 5 th 202 REV. Jun. 4 th 203
Note1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms
Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available
Series AMES40-MAZ 40 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3
Efficiency (typ.) Load VDC VDC ma ma(typ.) ma(typ.) μf %
FEATURES Smallest Encapsulated 10W Industrial Standard DIP16 Package Ultrawide 4:1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500VDC Operating Ambient Temp. Range 40 to 88 Low No
C B. Models. Ultra wide 4:1 input voltage 20 W DC/DC. edition and EN55032 class A
DC/DC Converter Ultra wide 4:1 input voltage 20 W DC/DC converter in a 1.6 x 1 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
Output Amps Model Number Output Voltage (max), (Note 2) Load Reg (max) Ripple & Noise pk-pk Efficiency typ.
Universal 90-264VAC Input High Efficiency Improved EMI Performance 3000VAC Isolation Single, Dual and Triple Outputs Full Safety Approvals As Small as 2.36 W x 3.41 L x 0.93 H (Single Output) Output Amps
60 Watt Medical (MWLT)
60 Watt Medical (MWLT) Features 4 x 2 x 1.2 inches Ultra high efficiency > 85% 50-65 W from 1 to 3 outputs Low leakage current < 250 µa Nemko, UL & CSA approvals to IEC60601 EN55022-B, CISPR22-B, FCC Part15
C B. Models. Operating up to 5000m altitude 5 year product warranty
DC/DC Converter Wide 2:1 input voltage 10 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1
Series AMEL20-MAZ 20 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Energy Star compliant Operating Temp: -40 o C to +70 o C Ultra-small package Over load, Over, Short Circuit Protection Up
VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R
Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma (typ.) ma(typ.) VDC μf % MKW15-12S05M. Output Current Input Current Reflected Ripple
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Range Fully Regulated Output I/O Isolation 40VAC with Reinforced Insulation, rated for 300VAC Working Low Leakage Current < 5µA Operating Ambient
SPECIFICATION M/N: MPD-F For SWITCHING POWER SUPPLY
SPECIFICTION For SWITCHING POWER SUPPLY M/N: MPD-F113-2 Revision History REV. Mar. 10 th 2011 Revised the value of inrush current. REV. Mar. 15 th 2011 Conformed the solution of EMI class B. REV. Mar.
Series AMEL5-MAZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 4000 Operating Temp: -40 C to +80 C or -25 C to +80 C Input: 90-264, 47-440Hz, or 130-370VDC Over load, Over, Short Circuit Protection
20W DC-DC Converter P20J-Series
20W - Converter P20J-Series Wide 4:1 input range Efficiency up to 89 % Adjustable output voltage Remote control on / off 3000 V isolation Continuous short circuit protection Over voltage protection MTBF
LFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00
Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down
LFWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature 3.37m Hours, Telcordia
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)
180 Watt Medical Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing 12V
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, VDC RAILWAY APPLICATIONS
DC-DC CONVERTERS SINGLE OUTPUT, 60 WATTS EXTREMELY WIDE 12:1 INPUT VOLTAGE RANGE: 9-75VDC, 14-160VDC RAILWAY APPLICATIONS FEATURES 60 Watt Output Power Extremely Wide 12:1 Input range: 9-75, 14-160 Output
Series AM1M-NZ 1 Watt DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Low Profile DIP case 1.5 and 3K V I/O Isolation Continuous Short circuit protection Max Input Current Full/No
EPT W 5V 2.4A ±5% EPT W 7V 1.71A ±5% EPT W 9V 1.5A ±5% EPT W 12V 1.25A ±5% EPT W 15V 1.0A ±5%
15 Watts US DoE Energy efficiency level VI Interchangeable input plugs Class II Single outputs 5 to 48V EN55022 Level B conducted & radiated 5 Year warranty The EPT15 range of wall plug adaptors are compliant
efo Series Wide range AC/DC Single Output 1000W Rugged Power Supply Electrical Specification for: Telkoor Part Number:
Electrical Specification for: efo1000-124 Series Wide range AC/DC Single Output 1000W Rugged Power Supply Telkoor Part Number: 900-1124-1000 GENERAL SCALE RELEASE DATE 05/08/2012 SHEET 1 OF 6 Rev Level
IEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 4W PCB mount package
Constant Voltage Mode
FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:
Watts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
Series AMEPR60C-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMEPRC-AZ Models Single output Model Max Output Power (W) 1 FEATURES: Output Voltage Range (V) 3 Output Current 3 AMEPRC-120AZ 36-0 - 1.20 AMEPRC-361AZ
Universal input VAC <150mW No load power consumption
Features Regulated Converter Description Universal input 85-64VAC
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R A N D The VEL05 series
DPS240/12V Dimmable Power Supply Custom LitePad
Rosco s DPS240/12V Dimmable Power Supply is designed to complement larger Custom LitePad installations. The system comes with power supply and controller all pre-wired and ready to integrate with an array
Electrical Specification for: efo Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: CUSTOMER SIZE CAGE CO
Electrical Specification for: efo400-112 Wide range AC/DC Single 12V Output 400W Power Supply Telkoor Part Number: 900-4136-0000 GENERAL SCALE RELEASE DATE PRELIMINARY SHEET 1 OF 5 REVISION HISTORY Rev
TMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency
TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal
LFMWLP225 SERIES 225 Watt Open Frame Power Supply Measures: 4.00 x 2.00 x 1.00
Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Approval to EN60601 3 rd Edition Efficiencies upto 94% -40 to 70 degree operating temperature* Dual fusing 12V / 0.5A Fan Output,
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)
WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,
TEP 75WI Series, 75 Watt
TEP 75WI Series, 75 Watt Features UL 60950-1 Rugged, compact metal case Screw terminal adaptor available for easy connection EN 50155 approval for railway applications Optional DIN-rail mounting kit Ultra
Parameter Condition Min. Typ. Max. Internal Input Filter. nom. Vin = 230VDC 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
MPM-U653-DCF-B M/N: MPM-U653-DCF-B. 650W Medical AC / DC SPECIFICATION FOR SWITCHING POWER SUPPLY. Revision History
SPECIFICATION FOR SWITCHING POWER SUPPLY M/N: Revision History Version Date Change Items Rev. 1.0 July.21. 2017 Established. Page 1 Models & Ratings FEATURES 650W medical power supply with force air cooling.
36V 18 ~ 36V 16A 15A 12A 10A 8A 6.7A 5.72A 5A 20V 10 ~ 20V 24V 12 ~ 24V 192W 225W 240W 240W 240W 241.2W 240.2W 240W.
40W Single Output Switching Power Supply IP65 IP67 HLG-40 series SPECIFICATION MODEL HLG-40- HLG-40-5 HLG-40-0 HLG-40-4 HLG-40-30 HLG-40-36 HLG-40-4 HLG-40-48 OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY
Series Specifications Ta= 25 C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Condition Min. Typ. Max.
Features Regulated Converter Universal input VAC 4W PCB mount package
FEATURES. Nominal Output Voltage and Current
5W, AC-DC converter FEATURES 85-264V Universal AC or wide 100-370V DC Input Operating ambient temperature range: -40 to +85 High I/O isolation test voltage of up to 4000VAC Regulated output, Low ripple
TEP 100WIR Series, 100 Watt
TEP 100WIR Series, 100 Watt Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 92% No minimum
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC)
225 Watt Industrial Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
POWERBOX Medline 150 EBM04 Series W Single Output AC/DC Medical Switch Mode Adaptor, Desktop Style
Features Fulfills IEC60601-1-2:2014 (EMC 4th edition) Low safety ground leakage current Wide input range 90 to 264 VAC Optional output connectors 100% burn-in Overvoltage protection Overcurrent protection
4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required
Features Regulated Converters 4:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Over Current and Over Voltage Protection No Minimum Load Required Description The wide range input
SPECIFICATIONS. Input Output Agency Approvals 0 ~ 62.5A. toll-free (603)
Technical Data Sheet 750 Watt, 12 Volt, Single Output Power Supply With PFC, Voltage & Current Trim Functions UNIT CODE PS-RSP 750-12 DESCRIPTION 750 Watt 12 Volt, Single Output Power Supply with PFC plus
40 & 60 Watt Models. Low Leakage Current. EN61000 Compliant. Single & Multiple Outputs. Cover Kits Available
ECM40-60 40 & 60 Watt Models Small Size 2.0 x 4.0 x 1.2 Low Leakage Current Industrial & Medical Approvals Full Load Available Convection Cooled Wide Operating Temperature 0 C to +70 C Level B Conducted
Electrical Specifications. Input Current 115 VAC: 1 A max. 230 VAC: 0.5 A max.
MLP75 Medical Features 3 x 2 x 1 Inches Form factor 75 Watts Convection Approval to EN60601 3 rd Edition Efficiencies upto 93% -40 to 70 degree operating temperature Dual fusing Thermal Shut-Down feature
Packaging (5) Protection (3) Isolation Voltage (4)
Features Regulated Converters Regulated output with internal linear regulator Isolated.5W power in SMD package Up to 2kVDC isolation Industry standard pinout -4 C to + C operating temperature IEC/EN/UL62368-1
Parameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
Environmental. Electrical Specifications at 25 O C E Output Constant Current
12 Watt - Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 120 to 277VAC, 47-63Hz Number of Outputs: One Output Voltages:
TEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter Measures: 2.40 x 2.28 x 0.50
Features Compact metal package Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155 approval for railway applications Very high efficiency up to 91% No minimum load Soft start Ajustable
Environmental. Electrical Specifications at 25 O C E Output Constant Current
17 Watt - LD Series LD Series Model: LD Series Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 100 to 277VAC, 47-63Hz Number of
MMA-15 series. 15W Medical Grade Ultraminiature Switching Power Supplies. Single / Dual / Triple Outputs. Universal 90 to 264VAC Input
Single / Dual / Triple Outputs Universal 90 to 264VAC Input 3.3VDC to 24VDC Outputs Chassis 3.96 L x 2.16 W x 1.0 H 4,000VAC Input to Output Isolation PCB and Chassis Mount Packages Full Safety Approvals
ECF40 Series. 40 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
40 Watts 40 W Convection Rating 1.5 by 3 Footprint Low 1.1 Profile High Efficiency Medical and ITE pprovals High Power Density Less than 0.15 W No Load Input Power 3 Year Warranty The ECF40 series is designed
Universal input VAC <250mW No load power consumption -25 C to +80 C Operating temperature, with derating
Features Universal input VAC
Industrial Power Supplies
75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies
Switching Power Supplies
, RoHS compliant Features Ultracompact Open-Frame Switching Power Supply Easy Connection via Screw Terminal Block Universal Input 85 264 VAC, 50/60Hz Industrial Grade Components ow Ripple and oise Overload
275 Watt Medical Ultra low profile
127 x 76 x 19 mm Form factor 275 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing Electrical Specifications 12V /
VEL05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input
5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Fixed Mains Connectors Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND The VEL05 series
300 WATT, PFC, OPEN FRAME POWER SUPPLIES TABLE 1. OUTPUT RATINGS AND SPECIFICATIONS, RMW 300W SERIES
INSTRUCTION MANUAL KEPCO An ISO 9001 Company. 300 WATT, PFC, OPEN FRAME POWER SUPPLIES RMW 300W SERIES I INTRODUCTION SCOPE OF MANUAL. This instruction manual covers the installation and operation of the
Industrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
Series AM4T-Z 4 Watt DC-DC Converter
FEATURES: RoHS compliant 24 Pin DIP Package Low profile metal package High efficiency up to 85% Operating temperature -40 to + 85 Input / Output isolation 1500 or 3500VDC Pin compatible with multiple manufacturers