00839A-SD-6980SU-Cover 6/29/05 8:58 AM Page 3 DVD VIDEO PLAYER SD-6980SU OWNER S MANUAL. C 2005 Toshiba Corporation

Transcription

1 00839A-SD-6980SU-Cover 6/9/05 8:58 AM Page 3 DVD VIDEO PLAYER SD-6980SU OWNER S MANUAL C 005 Toshiba Corporation

2 00839A-SD-6980SU- 6/9/05 9: AM Page Introduction Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING : Do not install this equipment in a confined space such as a bookcase or similar unit. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED. CAUTIONS Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond. CAUTION : This DVD player employs a Laser System. To ensure proper use of this product, please read this owner s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized Service location.use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CLASS LASER PRODUCT KLASSE LASER PRODUKT LUOKAN LASER LAITE KLASS LASER APPARAT PRODUCTO LÁSER CLASE CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. SERIAL NUMBER: The serial number is found on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ENG-

3 00839A-SD-6980SU- 6/9/05 9: AM Page 3 Introduction Important Safety Instructions ) Read these instructions. ) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 0) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. ) Only use attachments/accessories specified by the manufacturer. ) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 3) Unplug this apparatus during lightning storms or when unused for long periods of time. 4) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 5) When you use headphones on the amplifier, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 6) Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 7) Never insert objects of any kind into this apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the apparatus. 8) Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. 9) Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious damage to the apparatus. 0) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and apparatus malfunction. ENG-3

4 00839A-SD-6980SU- 6/9/05 9: AM Page 4 Introduction FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the product and receiver. Connect the product into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. : This unit can be used only where the power supply is AC 0V, 60Hz. It cannot be used elsewhere. Regional code This DVD player is designed and manufactured for playback of region encoded DVD software. This unit can play only DVD discs labeled or ALL. s on Regional Codes Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player s regional code or the disc cannot play. If you try to play a DVD with a different region code from your player, the message Check Regional Code appears on the TV screen. s on DVDs and Video CDs Because of problems and errors that can occur during the creation of DVD and CD software and/or the manufacture of DVD and CD discs, Toshiba cannot guarantee that this DVD player will play every feature of every DVD bearing the DVD logo and/or every CD bearing the CD logo. As one of the creators of DVD technology, Toshiba DVD players are manufactured using the highest standards of quality, and as a result, such incompatibilities are rare. If you happen to experience any difficulty playing a DVD or a CD on this DVD player, please feel free to contact us via the method listed in the How to Obtain Warranty Services section on page 74. s on copyright The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials, is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or criminal liability. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. ENG-4

5 00839A-SD-6980SU- 6/9/05 9: AM Page 5 Introduction The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular, this product is licensed under the following US patents: 5,99,75, 5,740,37, 4,97,484, 5,4,678, 5,33,396, 5,539,89, 5,606,68, 5,530,655, 5,777,99, 6,89,308, 5,60,985, 5,48,643, 5,544,47, 5,960,037, 6,03,490, 5,878,080, and under US Published Patent Application No A. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 7-3 or ISO/IEC used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 7-3 or ISO/IEC No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 7-3 or ISO/IEC Introduction HANDLING CAUTIONS Before connecting other components to this player, be sure to turn them all off. Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player s internal parts may be damaged. Do not put a flower vase filled with water or any small metal objects on the player. Be careful not to put your hand into the disc tray. Do not place anything other than the disc in the disc tray. Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally. Be sure to remove the disc and turn off the player after use. Disconnect the AC power cord from the AC outlet when you don t intend to use the player for long periods of time. Clean the disc by wiping in a straight line from the inside to the outside of the disc. NOTES ON LOCATING Place the DVD video player on a level surface. Do not use it on a shaky or unstable surface such as a wobbling table or inclined stand. The loaded disc may become disaligned and damage the DVD video player. When you place this DVD video player near a TV, radio, or VCR, the playback picture may become poor and the sound may be distorted. In this case, place the DVD video player away from the TV, radio, or VCR. STORING DISCS Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. MAINTENANCE OF CABINET For safety reasons, be sure to disconnect the AC power cord from the AC outlet. Do not use benzene, thinner, or other solvents for cleaning. Wipe the cabinet with a soft cloth. ENG-5

6 00839A-SD-6980SU- 6/9/05 9: AM Page 6 Introduction Before you start Accessories Remote Control (AK H) Batteries for Remote Control (AA Size) (AC43-00H) User s Manual (AK A) Video/Audio Cable (AC39-400R) HDMI-HDMI Cable (MF A) Install Batteries in the Remote control Open the battery cover on the back of the remote control. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Insert two AA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. 30º 30º Within approx. 7m(3 feet) Distance : Approx. 7m(3 feet) from the front of the remote sensor. Angle : Approx. 30º in each direction of the front of the remote sensor. Do not expose the remote sendor of the DVD video player to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to opearate the DVD video player via the remote control. If the remote control doesn t operate properly: - Check the polarity + - of the batteries (Dry-Cell). - Check if the batteries are drained. - Check if remote control sensor is blocked by obstacles. - Check if there is any fluorescent lighting nearby. Caution: Never throw batteries into a fire. s: Be sure to use AA size batteries. Dispose of batteries in a designated disposal area. Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. ENG-6 If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment.

7 00839A-SD-6980SU- 6/9/05 9: AM Page 7 Introduction Table of Contents Introduction Safety Precautions Important Safety Instructions Before you start Table of Contents General Features Type of Playable Discs Front Panel Front Panel Display Rear Panel Remote Control Connections Choosing a Connection Basic Functions Playing a Disc Using the Search and Skip Functions Using the Display Function Using the Disc and Title Menu Using the Function Menu Repeat Play Slow Repeat Play Program Play & Random Play Advanced Functions Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle Using the Instant Replay/Skip Function Using the Marker Function Using the Zoom Function How to Insert a Memory Card DVD AUDIO Playback Super Audio CD Playback Clips Menu for MP3/WMA/JPEG/MPEG Folder Selection MP3/WMA Playback MPEG4 Playback Picture CD Playback Picture CD Playback for HD-JPEG Changing Setup Menu Using the Setup Menu Setting Up the Language Features Setting Up the Audio Options Setting Up the Display Options Setting Up the Parental Control Reference Controlling a TV with the Remote Control Troubleshooting Specifications ENG-7

8 00839A-SD-6980SU- 6/9/05 9: AM Page 8 Introduction General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(6:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion. Program Play (CD) You can program tracks to play in desired order. Parental Control (DVD) The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc. Various On-Screen Menu Functions You can select various languages (Audio/Subtitle) and screen angles while enjoying movies. Progressive Scan Progressive scanning creates an improved picture with double the scan lines of a conventional interlaced picture. Digital Photo Viewer (JPEG) You can view Digital Photos on your TV. Repeat You can repeat a song or movie simply by pressing the REPEAT MP3/WMA This unit can play discs created from MP3/WMA files. Instant Replay (DVD) This function is used to replay the previous 0 seconds of a movie from the current position. Instant Skip (DVD) This function skips playback ahead 0 seconds. Super Audio CD Super Audio CD is a high quality audio format with higher sampling rates and fuller, richer sound as compared to regular CD. DVD AUDIO DVD AUDIO is a format specifically designed to provide the highest possible audio fidelity capable on DVD. - Discs which cannot be played with this player. DVD-ROM DVD-RAM CD-ROM CDV CDI CVD CDGs play audio only, not graphics. - Ability to play back may depend on recording conditions. DVD-R CD-RW DVD-RW (V mode) - The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type or recording conditions. PROGRESSIVE SCAN OUTPUTS (55p) CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE, IF 55 PROGRESSIVE SCAN PICTURE PROBLEMS OCCUR, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR TV SET COMPATIBILITY WITH THIS MODEL 55p DVD PLAYER, PLEASE CONTACT OURS CUSTOMER SERVICE CENTER. MPEG4 This unit can play MPEG4 formats within an avi file. HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. ENG-8

9 00839A-SD-6980SU- 6/9/05 9: AM Page 9 Introduction To ensure proper use of this product, please read this owner s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD Home Theater System. Should the unit require service, contact an authorized service location. s on Discs HANDLING DISCS Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Introduction Symbol Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock. The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions. Indicates hazards likely to cause harm to the unit itself or other material damage. STORING DISCS After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. CLEANING DISCS Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. About the Symbol Display may appear on your TV display during operation and indicates that the function explained in this owner s manual is not available on that specific DVD video disc. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. ENG-9

10 00839A-SD-6980SU- 6/9/05 9: AM Page 0 Introduction Type of Playable Discs This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics DVD-VIDEO Audio + Video 5" 3/" Single-sided 40 min. Double-sided 480 min. Single-sided 80 min. Double-sided 60 min. - DVD contains excellent sound and video due to Dolby Digital and MPEG- system. - Various screen and audio functions can be easily selected through the on-screen menu. VIDEO-CD Audio + Video 5" 3/" 74 min. 0 min. - Video with CD sound, VHS quality & MPEG- compression technology. AUDIO-CD Audio 5" 3/" 74 min. 0 min. - CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time. DVD-AUDIO Audio + Video 5" 400 min. - DVD AUDIO is a format specifically designed to provide the highest possible audio fidelity capable on DVD. Super Audio CD Audio 5" 74 min. - Super Audio CD is a high quality audio format with higher sampling rates and fuller, richer sound as compared to regular CD. Disc Markings Region Number ~ NTSC STEREO DIGITAL SOUND Play Region Number NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc. Dolby Digital disc Stereo disc Digital Audio disc DTS disc MP3 disc Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is printed on the rear panel of the player. DivX Certification DVD AUDIO disc Super Audio CD disc You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the DVD player. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc and are used under license. ENG-0

11 00839A-SD-6980SU- 6/9/05 9: AM Page Introduction Front Panel 9 0 Introduction ON/STANDBY( ) Use to turn your player on and off (standby).. POWER Indicator This indicator will lights up when the power is on. 3. DISC TRAY Place the disc here. 4. DISPLAY Operation indicators are displayed here. 5. MULTI- CARD INPUT Insert a Memory Card. 6. OPEN/CLOSE ( ) Press to open and close the disc tray. 7. SKIP ( ) / SEARCH - Use to reverse skip a scene or music. - Press and hold to search backward. 8. SKIP ( ) / SEARCH - Use to forward skip a scene or music. - Press and hold to search forward. 9. STOP ( ) Stops disc play. 0. PLAY/PAUSE ( ) Begin or pause disc play. Front Panel Display 3. Disc type indicators. Play / Pause 3. Displays various messages concerning operations such as PLAY, STOP, LOAD... no DISC: No disc loaded. OPEN: The disc tray is open. LOAD: Player is loading disc information. ENG-

12 00839A-SD-6980SU- 6/9/05 9: AM Page Introduction Rear Panel CH ANALOG AUDIO OUT JACKS - Connect to an amplifier with 5.ch analog input jacks.. DIGITAL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. - Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG or DTS decoder. 3. AUDIO OUT JACKS Connect to the Audio input jacks of your television or audio/video receiver. 4. VIDEO OUT JACK - Use a video cable to connect to the Video input jack on your television. - The Video Output in Setup Menu must be set to COMPONENT(I-SCAN) or COMPOSITE/S-VIDEO. 5. S-VIDEO OUT JACK - Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality. - The Video Output in Setup Menu must be set to COMPOSITE/S-VIDEO. 6. HDMI OUT JACK - Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture. - If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically a maximum of 0 seconds later. - If you want to use a Video, S-Video or Component Output, unplug HDMI cable. 7. COMPONENT VIDEO OUT JACKS - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video. - If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work. - If COMPONENT(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work. - Consult your TV User s Manual to find out if your TV supports Progressive Scan (P-SCAN). If Progressive Scan is supported, follow the TV User s Manual regarding Progressive Scan settings in the TV s menu system. - If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work. - There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format. - Refer to the TV's instruction manual for detailed information regarding the HDMI terminal. - See pages 64 ~ 65 to get more information on how to use the setup menu. ENG-

13 00839A-SD-6980SU- 6/9/05 9: AM Page 3 Introduction Remote Control OPEN/CLOSE ( ) Button To open and close the disc tray.. NUMBER Buttons 3. INPUT Button Selects Video input connection in TV mode. 4. DVD Button Press this to operate DVD Player. 5. TV Button Press this to operate TV. (Go to TV mode.) 6. ZOOM Button Enlarges DVD picture REPLAY Button This function is used to replay the previous 0 seconds of a movie from the current position. 8. VOL (+, -) Buttons Control volume in TV mode. 9. SKIP Buttons ( / ) Use to skip the title, chapter or track. 0. STOP Button ( ). SEARCH Buttons ( / ) Allow you to search forward/backward through a disc.. DISPLAY Button Displays the current disc mode. 3. SETUP Button Brings up the Setup menu. 4. SACD/CD Button Selects Super Audio CD or CD playback mode. 5. AUDIO Button Use this button to access various audio functions on a disc. 6. SUBTITLE Button 7. INDEX Buttons Use to skip the INDEX in DVD Audio disc. 8. PROGRAM Button Allows you to program a specific order. 9. ON/STANDBY Button Turns the power on or off Button Press to select channel over 00. For example, to select channel, press 00, then press and.. HDMI Button HDMI Output resolution setup.. V.OUT Button Select Video output format. 3. CH (, ) Buttons Channel selection in TV mode. 4. MARKER Button 5. SKIP Button This function skips playback ahead 0 seconds. 6. PLAY/PAUSE Button ( ) Begin/Pause disc play. 7. RETURN Button Returns to a previous menu. 8. MENU/DISC Button Brings up the DVD player s menu. Brings up the Disc menu. 9. ENTER/ œ Buttons This button functions as a toggle switch. 30. DVD/CARD Button Use to operate DVD/CARD. 3. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. 3. STEP Button Advances play one frame at a time. 33. PAGE Buttons Use to skip the PAGE in DVD Audio disc. 34. CLEAR Button Use to remove menus or status displays from the screen. ENG-3 Introduction

14 00839A-SD-6980SU- 6/9/05 9: AM Page 4 Connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connection to a TV (Video) Using video/audio cables, connect the VIDEO (yellow)/audio (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/audio (red and white) IN terminals of your TV. Turn on the DVD player and TV. RED WHITE YELLOW Audio Cable Video Cable 3 Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen. RED WHITE YELLOW - Noise may be generated if the audio cable placed too close to the power cable. - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 0 to ) - The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV. - If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player. - If you press the V.OUT button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (COMPOSITE/S-VIDEO COMPONENT(I-SCAN) HDMI/COMPONENT(P-SCAN)) If HDMI/COMPONENT(P-SCAN) mode is selected and your TV does not support HDMI or progressive scan, you cannot see any picture. Press the V.OUT button untill the picture can be seen on the screen. - When the Video Output in Setup menu is set to HDMI/COMPONENT(P-SCAN), the Video and S-Video Outputs do not work. ENG-4

15 00839A-SD-6980SU- 6/9/05 9:3 AM Page 5 Connections Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(y) and color(c) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) Using an S-Video cable (not supplied), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of your TV. Connections Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. 3 Press the input selector on your TV remote control until the S-Video signal from the DVD player appears on your TV screen. RED RED WHITE Audio Cable WHITE S-Video Cable (not supplied) 4 Set the Video Output to COMPOSITE/S-VIDEO in the Display Setup menu. (See pages 64 to 65) You can use the V.OUT button to change the Video Output mode. (See page 4) - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 0 to ) - The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. ENG-5

16 00839A-SD-6980SU- 6/9/05 9:3 AM Page 6 Connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(y), blue(pb), red(pr) signals to present clear and clean images. (Audio signals are delivered through the audio output.) Using component video cables (not supplied), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. RED BLUE GREEN 3 Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen. RED WHITE RED Audio Cable WHITE RED BLUE GREEN Component cable (not supplied) 4 Set the Video Output to COMPONENT(I-SCAN) in the Display Setup menu. (See pages 64 to 65) You can use the V.OUT button to change the Video Output mode. (See page 4) - If Video output is incorrectly set to COMPOSITE/S-VIDEO with the Component cables connected, the screen will turn red. - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 0 to ) - The component terminal of your TV may be marked R-Y, B-Y, Y or Cr, Cb, Y instead of PR, PB, Y depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. ENG-6

17 00839A-SD-6980SU- 6/9/05 9:3 AM Page 7 Connections Connection to a TV (Progressive) Using component video cables (not supplied), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. RED BLUE GREEN Connections 3 Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen. RED WHITE RED Audio Cable WHITE RED BLUE GREEN Component cable (not supplied) 4 Set the Video Output to HDMI/COMPONENT(P-SCAN) in the Display Setup menu. (See pages 64 to 65) You can use the V.OUT button to change the Video Output mode. (See page 4) To see the progressive video output, - Consult your TV User s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User s Manual regarding Progressive Scan settings in the TV s menu system. - Depending on your TV, the connection method may differ from the illustration above. - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality. ENG-7

18 00839A-SD-6980SU- 6/9/05 9:3 AM Page 8 Connections Connecting to a TV with HDMI Jack Using the HDMI cable, connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen. HDMI cable HDMI VIDEO Specifications When you press the HDMI button, 480p, 70p and 080i are selected in order. The first press of the HDMI button brings up the current resolution. The second press allows you to change the HDMI output resolution. - Depending on your TV, certain HDMI output resolutions may not work. Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate properly with this DVD player. - Please refer to the user's manual of your TV. - If HDMI cable is plugged into TV, the DVD player s output is set to HDMI within 0 seconds. - If you set the HDMI output resolution 70p or 080i, HDMI output provides better picture quality. ENG-8

19 00839A-SD-6980SU- 6/9/05 9:3 AM Page 9 Connections HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. HDMI connection description HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data). - Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV. - If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen. Why does Toshiba use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. What is the HDCP? HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content output via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD, etc.) and a display device (TV, Projector, etc.). Content is encrypted at the source device to prevent unauthorized copies from being made. Connections ENG-9

20 00839A-SD-6980SU- 6/9/05 9:3 AM Page 0 Connections Connection to an Audio System ( Channel Amplifier) Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN terminal of your TV as described on pages 4 to 8. 3 Turn on the DVD player, TV, and Amplifier. RED WHITE Audio Cable RED WHITE 4 Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input. -Channel stereo amp - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 6) - The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. ENG-0

21 00839A-SD-6980SU- 6/9/05 9:3 AM Page Connections Connection to an Audio System (Dolby Digital or DTS Amplifier) If using an optical cable (not supplied), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not supplied), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN terminals of your TV as described on pages 4 to 8. Connections 3 Turn on the DVD player, TV, and Amplifier. or Optical Cable (not supplied) Coaxial Cable (not supplied) Dolby Digital or DTS amp 4 Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input. - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 6) - The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. - Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used. - DVD-AUDIO only plays back two channel audio through the Digital Audio out. Multi-channel DVD-Audio discs are output through the Analog outputs. - SACD plays back only through the Analog outputs. (See pages 60 to 6) ENG-

22 00839A-SD-6980SU- 6/9/05 9:3 AM Page Connections Connection to a 5.CH Analog Amplifier If using audio cables for 5. CH Analog Amplifier (not supplied) connect the 5.CH ANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.CH ANALOG AUDIO IN terminals of the 5.CH Analog Amplifier. Using the video signal cable(s), connect the VIDEO, S-VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO, COMPONENT or HDMI IN terminals of your TV as described on pages 4 to 8. GREEN WHITE BLACK 3 Turn on the DVD player, TV, and Amplifier. GREEN WHITE BLACK 5.ch Analog Amplifier 4 Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input. - Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier. (See pages 60 to 6) - The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier. ENG-

23 00839A-SD-6980SU- 6/9/05 9:3 AM Page 3 Basic Functions Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input on the TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears again where you can reset your preferred language. Playback Press the OPEN/CLOSE ( ) The STANDBY indicator light goes out and the tray opens. Press for English Touche pour Français Drücken Sie 3 für Deutsch Pulse 4 para Español Premere 5 per Italiano Druk op 6 voor Nederlands Basic Functions Place a disc gently into the tray with the disc s label facing up. 3 Press the PLAY/PAUSE ( ) button or OPEN/CLOSE ( ) button to close the disc tray. RESUME function When you stop disc play, the player remembers where you stopped, so when you press PLAY/PAUSE ( ) button again, it will pick up where you left off. (unless the disc is removed or the player is unplugged, or if you press the STOP ( ) button twice.) ENG-3

24 00839A-SD-6980SU- 6/9/05 9:3 AM Page 4 Basic Functions 4 Stopping Play Press the STOP ( during play. ) button - If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. (Automatic Power-Off Function) 5 Removing Disc Press the OPEN/CLOSE ( ) 6 Pausing Play Press the PLAY/PAUSE ( ) or STEP button on the remote control during play. Screen stops, no sound. To resume, press the PLAY/PAUSE ( once again. ) button If the player is left for about 5 minutes in pause mode, it will stop. 7 Step Motion Play (Except CD) Press the STEP button on the remote control during play. Each time the button is pressed, a new frame will appear. No sound is heard during STEP mode. Press the PLAY/PAUSE ( ) button to resume normal play. You can only perform step motion play in the forward direction. 8 Slow Motion Play (Except CD) Press the SEARCH ( ) button to choose the play speed between /8, /4 and / of normal during PAUSE or STEP mode. No sound is heard during slow mode. Press the PLAY/PAUSE ( ) button to resume normal play. Reverse slow motion play will not work. This ( ) icon indicates an invalid button press. ENG-4

25 00839A-SD-6980SU- 6/9/05 9:3 AM Page 5 Basic Functions Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH ( or ) button on the remote control for more than second. During play, press the SEARCH ( or ) button and press again to search at a faster speed. DVD VCD CD/SACD/DVD-AUDIO X, 4X, 8X, 3X, 8X 4X, 8X X, 4X, 8X Skipping Tracks - The speed marked in this function may be different from the actual playback speed. - No sound is heard during search mode (Except CD). Basic Functions During play, press the SKIP ( or ) - When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter. - When playing a VCD.0 in Menu Off mode, or a VCD. or a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the SKIP ( ) button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track. - If a track exceeds 5 minutes when playing a VCD and you press the button, it moves forward 5 minutes. If you press the button, it moves backward 5 minutes. When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU ENG-5

26 00839A-SD-6980SU- 6/9/05 9:3 AM Page 6 Basic Functions Using the Display Function When Playing a DVD/VCD/CD/MPEG4 During play, press the DISPLAY button on the remote control. You can select Info in the function menu by pressing the MENU select the desired item. DVD 0 0 0:00:3 ENG 5.CH Off VCD 0 0:00:43 When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. CD 0 0:00:48 MPEG4 0 0:00:3 MP3 /8 No 640x7 ENG-6

27 00839A-SD-6980SU- 6/9/05 9:3 AM Page 7 Basic Functions 3 Press the œ/ buttons to make the desired setup and then press the ENTER You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from a desired time. 4 To make the screen disappear, press the DISPLAY button again. To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Basic Functions Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD). Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs. Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.CH. A DVD disc can have up to eight different soundtracks. The MP3, AC3 and WMA are supported.(divx) Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD disc can have up to 3 different subtitles. (DivX) File Size has a relationship with resolution of a title. The larger file size is, the higher resolution is displayed. If the file resolution is small, it scales up automatically. So you can see the larger screen. ENG-7

28 00839A-SD-6980SU- 6/9/05 9:3 AM Page 8 Basic Functions Using the Disc and Title Menu Using the Disc Menu (DVD) During the playback of a DVD disc, press the SETUP button on the remote control. select Disc Menu, then press the or ENTER Press ENTER key for Disc Menu - Depending on a disc, the Disc Menu may not work. - You can also use the Disc Menu, using the DISC MENU button on the remote control. - In VCD.0 the DISC MENU button is used to select Menu On or Menu Off mode. Using the Title Menu (DVD) During the playback of a DVD disc, press the SETUP button on the remote control. select Title Menu, then press the or ENTER Press ENTER key for Title Menu - Depending on a disc, the Title Menu may not work. - Title Menu will only be displayed if there are at least two titles in the disc. ENG-8

29 00839A-SD-6980SU- 6/9/05 9:3 AM Page 9 Basic Functions Using the Function Menu Using the Function Menu (DVD/VCD) Press the SETUP button during playback. select Function, then press the or ENTER - Info (See pages 6 to 7) - Zoom (See page 39) - Marker (See pages 37 to 38) - Repeat (See pages 30 to 3) - Angle (See page 35) - Front Display For Front display, you can select the brightness of the display to 3 different modes : Auto, Bright, Dim. Info Zoom Bookmark Repeat Angle Front Display : Bright Basic Functions 3 select one of the six functions. Then press the or ENTER button to access the function. You can also directly select these functions using their respective buttons on the remote control. - When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. ENG-9

30 00839A-SD-6980SU- 6/9/05 9:3 AM Page 30 T T T D T D Basic Functions Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD/VCD/CD Press the REPEAT button on the remote control. Repeat screen appears. Press the œ/ buttons to select Chapter, Title or A-B, then press the ENTER DVD VCD/CD Off 0 0 A-B Off 0 0 A-B REPEAT ENTER REPEAT ENTER DVD repeats play by chapter or title, CD and VCD repeat play by disc or track. Chapter ( ): repeats the chapter that is playing. Title ( ): repeats the title that is playing. Disc ( ): repeats the disc that is playing. Track ( ): repeats the track that is playing. A-B: repeats a segment of the disc that you select. Using the A-B Repeat function. Press the REPEAT button on the remote control.. Press the œ/ buttons to Select A-B. 3. Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. 4. Press the ENTER button at the point where you want the repeat play to stop (B). - To return to normal play, press the CLEAR A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has elapsed after point (A) has been set. 3 To return to normal play, press REPEAT button again, then press the œ/ buttons to select Off and press ENTER DVD VCD/CD Off 0 0 A-B Off 0 0 A-B REPEAT REPEAT ENTER ENTER ENG-30 - Depending on a disc, the Repeat function may not work. - When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton.

31 00839A-SD-6980SU- 6/9/05 9:3 AM Page 3 Basic Functions Slow Repeat Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely. When playing a DVD/VCD During play, press the PLAY/PAUSE ( ) Press the SEARCH ( ) button to choose the play speed between /8, /4 and / of normal during PAUSE or STEP mode. Basic Functions 3 Press the REPEAT button on the remote control. Press the œ/ buttons to select A-B. The disc will play from A to B repeatedly at the speed you chose. 4 Press the ENTER button at the point where you want repeat play to start (A). B is automatically highlighted. Press the ENTER button at the point where you want the repeat play to stop (B). To set A-B REPEAT, set (A) first, then set (B) after the following slow play time has elapsed: /8x: wait 40 seconds, then press B /4x: wait 0 seconds, then press B /x: wait 0 seconds, then press B 5 To return to normal play, press the CLEAR button and then press the PLAY/PAUSE ( ) When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. ENG-3

32 00839A-SD-6980SU- 6/9/05 9:3 AM Page 3 Basic Functions Program Play & Random Play Program Play (CD) Program Play allows you to select the order in which you want tracks to play. During play, press the PROGRAM Press the œ/ buttons to select PROGRAM. Press the ENTER PROGRAM œ RANDOM 3 Press the / /œ/ buttons to select the first track to add to the program. Press the ENTER The selection numbers appear in the Program Order box. Track PROGRAM 0 Program Order To return to the previous menu screen, press the RETURN - To cancel the selected program order, press the CLEAR - This unit can support a maximum of 0 programmed tracks. 4 Press the PLAY/PAUSE ( ) The disc will be played in programmed order. Random Play (CD) Random Play plays a disc's tracks in random order. Press the PROGRAM Press the œ/ buttons to select RANDOM. Press the ENTER PROGRAM œ RANDOM ENG-3 - Depending on a disc, the Program and Random Play functions may not work. - While in playback mode, press the CLEAR button on the remote control to cancel Program Play or Random Play.

33 00839A-SD-6980SU- 6/9/05 9:3 AM Page 33 Advanced Functions Selecting the Audio Language You can select a desired audio language quickly and easily with the AUDIO Using the AUDIO button (DVD/VCD/CD) Press the AUDIO The Audio changes when the button is pressed repeatedly. - The audio languages are represented by abbreviations. DVD ENG DOLBY DIGITAL 5.CH AUDIO When playing a VCD or CD, you can select among Stereo, Right or Left. VCD/CD Stereo AUDIO To remove the AUDIO icon, press the CLEAR or RETURN Advanced Functions - This function depends on audio languages are encoded on the disc and may not work. - A DVD disc can contain up to 8 audio languages. - To have the same audio language come up whenever you play a DVD; Refer to Using the Audio Language on page 58. ENG-33

34 00839A-SD-6980SU- 6/9/05 9:0 AM Page 34 Advanced Functions Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE Using the SUBTITLE button (DVD/MPEG4) Press the SUBTITLE The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. DVD Off SUBTITLE Press the œ/ buttons to select the desired subtitle language on a MPEG4 then press the ENTER. MPEG4 NONE To remove the SUBTITLE icon, press the CLEAR or RETURN - Depending on DVDs, you can change desired subtitle in the Disc Menu. Press the DISC MENU - This function depends on what subtitles are encoded on the disc and may not work on all DVDs. - A DVD disc can contain up to 3 subtitle languages. - To have the same subtitle language come up whenever you play a DVD; Refer to Using the Subtitle Language on page 59. ENG-34

35 00839A-SD-6980SU- 6/9/05 9:0 AM Page 35 Advanced Functions Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the Angle Function (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. During play or pause mode, press the SETUP button on the remote control. select Function, then press the or ENTER Info Zoom Bookmark Repeat Angle Front Display : Bright 3 select Angle, then press the or ENTER Info Zoom Bookmark Repeat Angle Front Display : Bright Advanced Functions 4 Press the œ/ button repeatedly to select the desired angle. To remove the ANGLE icon, press the CLEAR or RETURN 4/6 ANGLE If the disc has only one angle, this feature won t work. Currently, very few discs have this feature. ENG-35

36 00839A-SD-6980SU- 6/9/05 9:0 AM Page 36 Advanced Functions Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. Press the REPLAY - The current scene moves backward about 0 seconds, and plays back. Using the Instant Skip function (DVD) Use this function to skip playback about 0 seconds ahead of the current scene. Press the SKIP - Playback will skip ahead 0 seconds. Depending on the disc, these functions may not work. ENG-36

37 00839A-SD-6980SU- 6/9/05 9:0 AM Page 37 Advanced Functions Using the Marker Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Marker Function (DVD/VCD) During play, press the MARKER button on the remote control. Using the SETUP During play, press the SETUP button on the remote control. select Function, then press the or ENTER Info Zoom Bookmark Repeat Angle Front Display : Bright select Bookmark, then press the or ENTER Info Zoom Bookmark Repeat Angle Front Display : Bright Advanced Functions When you reach the scene you want to mark, press the ENTER Up to three scenes may be marked at a time. - When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. - Depending on a disc, the Bookmark function may not work. ENG-37

38 00839A-SD-6980SU- 6/9/05 9:0 AM Page 38 Advanced Functions Recalling a Marked Scene During play, press the MARKER button on the remote control. Press the œ/ buttons to select a marked scene. 3 Press the PLAY/PAUSE ( ) button to skip to the marked scene. Clearing a Marker During play, press the MARKER button on the remote control. Press the œ/ buttons to select the bookmark number you want to delete. 3 Press the CLEAR button to delete a bookmark number. ENG-38

39 00839A-SD-6980SU- 6/9/05 9:0 AM Page 39 Advanced Functions Using the Zoom Function Using the Zoom Function (DVD/VCD) During play, press the ZOOM button on the remote control. Using the SETUP During play or pause mode, press the SETUP button on the remote control. select Function, then press the or ENTER Info Zoom Bookmark Repeat Angle Front Display : Bright select Zoom, then press the or ENTER Info Zoom Bookmark Repeat Angle Press the / or œ/ buttons to select the part of the screen you want to zoom in on. Press the ENTER Front Display : Bright During DVD play, press ENTER to zoom in X/4X/X/Normal in order. During VCD play, press ENTER to zoom in X/Normal in order. When VCD.0 is in Menu Off mode only, this function works. Select Menu Off by pressing the DISC MENU buton. Advanced Functions ENG-39

40 00839A-SD-6980SU- 6/9/05 9:0 AM Page 40 Advanced Functions How to insert a Memory Card This unit accepts different types of Memory Cards Insert the Memory Card correctly with the label facing up, otherwise it may not work. SD(Secure Digital TM ) memory card MMC (MultiMediaCard TM ) xd-picture card Memory Stick TM Memory Stick TM (Pro) CompactFlash memory card (Type ) CompactFlash memory card (Type ) Card Mark Contents MP3/ WMA/ JPEG files Playable card capacity 3 MB- GB 8 MB- GB 6 MB- GB 6 MB- 8 MB 8 MB- GB 8 MB- 4 GB 8 MB- 4 GB Multi card slot to support types of memory cards: Memory Stick, Memory Stick-Pro, Memory Stick Duo, SD, Mini SD Card and xd-picture Card, MMC, RS-MMC, Smart Media Card, Compact Flash, Micro Drive. When cards are inserted in two slots, the card which is inserted first has a priority on playback. Toshiba is an authorized licensee of the Compact Flash registered trademark. SD is a trademark of SD Card Association. MMC and MultiMedia Card are trademarks of Infineon Technologies AG and licensed to MMCA (MultiMediaCard Association). Memory Stick is a trademark of Sony Corporation. xd-picture Card is a trademark of Fuji Photo Film Co., Ltd. SmartMedia is a trademark of Toshiba Corp. Micro Drive is a trademark of Hitachi Global Storage Technologies Netherlands B.V. - This device supports xd M series card. - This unit is able to recognize up to a maximum of,450 files per card. - If it is not fully inserted, the Memory Card will not work. Some memory cards may not be perfomed correctly. - If you remove the Memory Card during Memory Card operation, the recorded data may become corrupted. It is better to remove it after pressing DVD/CARD button to return to DVD/CD Mode. - Memory Stick Duo, Mini SD, and RS-MMC must be inserted into a slot using adapter. But some Memory cards may not be performed correctly depending on the adapter condition. - DVD/CD cannot be played in the Memory Card mode. If you press the DVD/CARD or OPEN/CLOSE button in M.CARD mode, the system will automatically enter the DVD/CD mode. - When pressing the DVD/CARD button to play the disc again, the player doesn t remember where you stopped. - It takes the longer time to load files according to Memory Card Maker, file size and the number of files. When playing a Memory Card Insert a Memory Card. Press the DVD/CARD button on the remote control. 3 Depending on the file type stored on the Memory card, audio files will be played the same way as MP3/WMA files and picture files will be played the same way as Picture CD s files. (See pages 48 to 54) ENG-40