User Manual Tiny Audio C2+ DAB+ radio receiver and FM transmitter for cars

Transcription

1 User Manual Tiny Audio C2+ DAB+ radio receiver and FM transmitter for cars Read this manual carefully before using the product

2 Safety Instructions: 1. Do not use near water 2. Wipe clean with a dry cloth 3. Do not block the vents 4. Do not use near heat objects 5. Do not expose to moisture 6. Do not expose to water, steam, sand or other external stresses 7. Do not place in heat 8. Antenna must be mounted correctly according to the manual

3 Contents of the package 1. C2+ DAB adapter 2. Dashboard passive antenna 3. Mini-jack cable 3.5mm 4. Charging cable with adapters 5. Suction cups for dashboard antenna

4 Features of C2+ Unit 1. Station down 2. Station up 3. TX/SCAN 4. DAB/AUX 5. Line out 6. AUX-in 7. Goose neck 8. Power connector 9. Charging cable 10. Connector for DAB antenna 11. Display

5 Connect and mount DAB + antenna inside your vehicle: The antenna attaches to the supplied suction cups and placed on the windshield of the car. The antenna can also be mount vertically along the right side of the window. Cables must not be stretched so that they become an obstacle to the operation of the vehicle airbags or function. Using the Digital DAB + radio receiver: Plug C2+ DAB + adapter into the cigarette outlet. The display will show Tiny Audio logo and then goes into the DAB + mode. On first use, you must seek out all DAB + stations by pressing the "DAB / AUX" button for 3 seconds to activate the "Auto Scan". All available radio stations will be found and stored until a new "Auto Scan" (auto search) is used. During the search, a bar appears on the screen to indicate progress and the total number of channels found. When they are found and you see all DAB + radio channels, you can choose them with <" and ">". Receive signal from DAB + radio through the cable: Connect the stereo speakers in the car "Aux-in" or "line-in" to "LINE OUT" jack on the left side of C2+ with the included 3.5mm audio cable.

6 - Select FM broadcasting frequency (Auto): 1. Press "TX / SCAN" button to display FM broadcasting frequency(tx FREQ). 2. Press and hold the "TX / SCAN" for 3 seconds to activate automatic search for a transmit frequency not disturbed by other channels. The detection process takes seconds. 3. Press and hold the "TX / SCAN" again to select the next available frequency. 4. When the "free" frequency is selected, the display returns to DAB + mode automatically after 3 seconds and the selected "free" rate (TX FREQ) will appear in red at the top of the screen, for example. TX108.0MHz. 5. Set your car's FM radio to the selected "vacant" frequency (TX FREQ) for transmitting signal from DAB+ radio to your car stereo. Selecting the FM transmitter frequency (manual): 1. Press "TX / SCAN" to display the FM frequency (TX FREQ). 2. Then press the ">" or "<" to select your favorite frequency (based on past experience with which frequencies are available) you will get to the car radio. 3. When selected, the display returns to DAB + mode automatically after 3 seconds and the selected frequency will appear in red at the top of the screen. Search for and select DAB + channels 1. Select DAB + mode using the "DAB / AUX" button. 2. Press ">" or "<" to select DAB + channels. 3. You can also press and hold the "DAB / AUX" button for 3 seconds to activate the "Auto Scan" again if you need to update DAB + radio channels.

7 4. Press ">" or "<" to select the desired DAB + channels. Note: For normal use you do not need to do auto search Each time you use DAB + radio unless it has recently added new channels. Then it may be necessary to make a autosearch again. 5. The detection process is similar to a regular stereo. 6. Service information shows technical information about the current status of the channels being broadcast. While listening to DAB +, the screen will display the following if applicable 1. Program type 2. Multiplex-name 3. Time 4. Station-name 6. Frequency 7. Volume-level 8. Signal strength Broadcast frequency Service Following On status

8 Service Following ON/OFF Control: 1. Press the MODE/AUX button until DAB mode is found. 2. In DAB mode, press and hold the TX/SCAN button to turn ON the service following function and a S/F white icon will appear at the LCD screen. Repeat the same procedure to turn OFF the servicefollowing function and a S/F icon will also disappear from the LCD screen. Traffic Announcement Turning the Traffic Announcement Function On/Off 1. To turn on the Traffic Announcement function, press and hold " " og "DAB/AUX" to enter the settings menu. Find "Traffic Announcement" and confirm by pressing the "DAB/AUX" button. 2. Select "ON" and confirm by pressing the "DAB/AUX" button. 3. To turn off the service, follow the same steps as before, but select "OFF". Confirm by pressing the "DAB/AUX" button. When a local traffic announcement is being broadcasted, this will interrupt your current broadcast. The symbol "S/F" will change to "TA" to indicate that a traffic announcement is being broadcasted. When the broadcast ends, the symbol will revert to "S/F".

9 Selecting the background display and font color: The color of the background screen and font can be set in three different combinations: 1. Black background / white font 2. Black background / blue font 3. Black background / orange font Follow the procedure below to specify color: 1. Press the TX / SCAN and DAB / AUX-liked in 3 seconds, color options menu will appear. 2. Scroll with the arrow ">" and "<" and select the color. 3. Once the color is selected, press the DAB / AUX button to confirm and exit. Connect Aux-in: C2+ has a 3.5 mm Aux-in connection on the right side. External audio sources such as ipad/iphone/ipod/nettbrett/android-phones or MP3 players etc. can be streamed wirelessly through FM transmission to your car stereo.

10 Connecting an external music player: 1. Press "DAB / AUX" button to get the AUX IN mode. You will see"aux" at the center of the screen and FM broadcasting frequency "TX FREQ" at the bottom of the screen. 2. Connect an external audio source ipad2/iphone/ipod or MP3 player, etc. into the "AUX IN" connector on the right side of C2+ with the included 3.5mm audio cable. Connect to line-out: C2 + has a 3.5mm line-out connector on the left side that will provide flawless audio input to your car stereo if you have an input connector on your stereo. Charge ipad / iphone / ipod / mobile phones / tablet / camera: Select the appropriate adapter from the package or use the phone's USB cable and plug it into the USB port. Connect your device and start charging (the charging current output: 5V, 2.1A, good enough voltage for charging ipad) Choose language and restore the factory settings: Press and hold the and DAB / AUX for three seconds and press the and to choose language and restore factory settings. Press DAB / AUX button to confirm and exit.

11 Specifications: Product Model: C2 + Radio Format: Digital DAB + & FM transmitter DAB + frequency: Band III ( MHz) FM transmission frequency: MHz Audio Aux-in / Line-out: 3,5 mm stereo cable Power Source: Cigarette Outlet (10-30V) Power output: 5V, 1.5A (Charging ipad/iphone/ipod/tablet/android-phone/mp3-player etc.) Dimensions: 66x60x190mm Weight (Net): Approx. 128g Certifications: CE RoHS In accordance with EMC- and Automotive-directive 2009/19/EC CE-R&TTE(EN &EN ) R&TTE-LVD(EN60065&EN50371). The information in this manual is subject to change without notice Tiny Audio is distributed by TT Micro AS. Postboks Oslo Norway Made in China