4-WIRED VIDEO DOOR PHONE 7" COLOR TFT INDOOR MONITOR

Size: px

Start display at page:

Download "4-WIRED VIDEO DOOR PHONE 7" COLOR TFT INDOOR MONITOR"

Buck Peters
5 years ago
Views:

1 4-WIRED VIDEO DOOR PHE 7" COLOR TFT INDOOR MITOR E705FC E705FC-W00 E706FC E706FC-W00 E705FC Series E706FC Series

2 Content Product Introduction Product Introduction Parts a Features Menu Introduction Main Menu Interface Function Setup System Setup Image Memory Menu Menu./ 2.Call Remi 3.Talk/Stop 3. Call Transfer To Talk 3.2 Monitor Transfer To Talk 3.3 Staby Transfer To Talk 3.4 Transfer Call 3.5 Hang up 4.Monitor Door Station/CCTV Camera 4.Monitor Door Station 4.2Monitor CCTV Camera 5.Unlock 6.Intercommunication 7.Talk Volume Adjustment 8.Extension Switch 9.Function Setup 9. Away Setup 9.2 Mute Setup 9.3 Keytone Unlock Time 9.5 CCTV Surveillance Period 9.6 Extension Switch Time 0.System Setup 0. 2 Door Calling/Pedal Control For Talk 0.2 Room Number Setup 0.3 Ringtone Setup 0.4 Time Setup 0.5 Reset 0.6 Language Setup.Image Memory Interface. Review Picture.2 Delete Picture.3 Take Photo 2.Image Adjustment 2. Brightness 2.2 Contrast 2.3 Color 2.4 Picture Effect 3.Busy Status 4.Automatically Setup Room Number 5.Alarm Guide 5. Room Number Confliction Alarm 5.2 Communication Trouble Alarm LED\Voice Status Introduction Trouble Shooting Guide Specifications Thank you for purchasing the intercom. Please read instructions carefully a follow directions before installing products. Any problems regarding this product, please contact your supplier. General features Multiple ringtones Door/Gate Release Feature Brightness,Color a Contrast adjustment Talk/Ringtone volume adjustment Do Not Disturb (mute) feature 2 door calling/pedal control for talk (Option) Has free communication (E706FC, E706FC-W00) CAUTI: To avoid the risk of electric shock, please don t remove cover or back. Please seek professional advice. Important operation a maintenance guidelines are included in the attached user s manual. NOTE Touch button 2 way CCTV camera connectable(optional) Max.to 4 room stations connectable with intercommunication a call transfer function Record color image, max. to 00pcs photo. Time display Extension switch function (Optional) *The manufacturer holds the right to change or modify designs a specifications without any prior notice, for the improvement a promotion of the product quality

3 Parts a Features Parts a Features Haset LED MIC. LED Screen VD-R Switch Touch button Task Icon (correspo with the below buttons) Connection terminal AC power cord (AC power supply) LED Away Touch button Monitor Confirm Task Icon Volume Adjustment Mute Menu/Confirm Left Mute Speaker(E706FC Series) Power Left/Up/Away Right Take Photo Right/Down/Mute Up Review Picture Unlock/Return Down Select Menu NOTE.The button function of E705FC Series a E706FC Series are correspoing. 2. Touch the center of button to operate the unit (as the finger iicate). Talk/Stop/Power Return Delete 4 5

4 Menu Function Menu Function Main menu Uer staby mode, touch,then the unit enters into main menu interface. Exit main menu:touch / Note: During operation, power LED keeps lighting. E705FC-W00 Function Setup Uer main menu interface, touch / to choose the FUNCTI item, then touch to enter into function setup interface. AWAY MUTE KEY OPEN CCTV AUX. Away setting (Only available for W00) Do Not Disturb (mute) Setup Keytone Setup Unlock Time Setup CCTV Surveillance Period Setup Extension switch time setup AWAY MUTE KEY OPEN CCTV AUX. SOUND Function Setup (Main function) System Setup (2 door calling, pedal control for talk, room number setup, ringtone, time setup) Image Memory (Review/Delete picture)(only available for W00) Menu (TFT screen version number, MCU, function of shortcut key) E705FC -Enter into main menu - confirm -Return to last menu -Exit the menu -Left/Up select -Right/Down select For example: Uer main menu interface, touch to enter into function setup interface. Select MUTE item by touching /. Touch, you are able to see the options /, choose by touching /. Touch to confirm operation. Now the unit is uer mute mode, LED keeps lighting. 6 7

5 Menu Function Menu Function System setup Uer main menu interface, touch / to choose the SYSTEM item, then touch to enter into system setup interface. ROOM NO. MUSIC 20XX/0/0 0: 00 RE Menu Uer main menu interface, touch / to choose the HELP item, then touch to enter into Menu. TFT MCU HOLD LEFT : REVIEW PHOTO PRESS LEFT : AWAY UP PRESS RIGHT : MUTE UP ROOM NO. MUSIC 20XX/0/0 0:00 RE 2 Door Calling / Pedal Control for Talk Setup Room Number Setup Ringtone Setup Time Setup Reset TFT MCU HOLD LEFT PRESS LEFT PRESS RIGHT TFT Screen Version Number MCU Version Number Uer staby mode, touch a hold button to review pictures. Uer staby mode, touch button to setup away mode. Uer staby mode, touch button to setup mute mode. Note: The menu is only display the help information, you cannot directly operate the functions in this interface. Image Memory Interface (W00) Uer main menu interface, touch / to choose the STORAGE item, then touch to enter into image memory interface. VIEW DEL ALL VIEW DEL ALL Review/Delete Picture Delete All Pictures 8 9

6 . / a.after connecting the power supply, the unit will sou DI with LED flashes, then power LED turns red, which means the unit is powering on a in staby mode. b. Uer staby mode, touch a hold, till it sous DI, then power LED turns off, which means the unit is uer off mode. Uer off mode, touch to directly enter into staby mode. Note: No sou when you have setup the mute mode. 2.Call Remi a.when the door station calls in, room station screen will display its image automatically. b.when the room station is talking with door station, a another door station calls, the screen will display icon a no ringing. 3.Talk / Stop 3. Call Transfer To Talk When the door station rings, touch to start talk. (You need to pickup the haset to talk when you use E705FC) 3.2 When the room station is in monitor mode, touch to start talk. Note:Refer to operation 4. for Monitor operation. 3.3 Staby Transfer To Talk Uer staby mode, touch to start talk with Door. 3.4 Transfer Call When the room station is talking with door station, touch a hold to choose room number you need to transfer the call, then touch to transfer call. Now the seco room station sous the ring, touch to start talk. Other room stations enter into busy mode. 3.5 Hang up Uer talk mode, touch to exit talk. Or you can wait 90secs, it will automatically exit. 4.Monitor 4. Monitor Door Station Uer staby mode, touch to monitor Door. The monitoring channel would be DOOR /DOOR2/EXIT when you repeatedly touch the button. No image for Door when the system only connect with Door 2. 0

7 4.2 Monitor CCTV Camera (Optional) Uer staby mode, touch a hold to monitor CCTV. The monitoring channel would be CCTV/CCTV2/CCTV when you repeatedly touch the button. Note:. Refer to 9.5 for CCTV surveillance period. 2. Uer monitor mode, the icon iicate to take photo, icon iicate to review picture. The function is invalid. 5.Unlock When the room station is talking with door station, touch to open the door. (Refer to 9.4 for unlock time.) 6.Intercommunication When monitor A wants to call monitor B, touch a hold a the screen will display the room number (repeatedly press the button to choose monitor B number), then touch to call. Touch to exit if call failure. Note:When you see the room number on the screen after touching, you only have 0secs to operate the next step. Or the unit will go back to the staby mode automatically. 7.Talk Volume Adjustment During talk, touch to adjust the talk volume a save automatically, which has 9 levels could be adjustable. ( button iicate for icon. ) 8.Extension Switch Uer staby mode, touch a hold meanwhile mute LED till the unit sous DI, flashes, it means the extension switch is triggered. The switch will be automatically turned off after the setting time. Note:. You need connect with an external device to achieve the extension switch function. 2. Refer to 9.6 for extension switch time. 9.Function Setup Uer main menu interface, touch / to choose FUNCTI, then touch to enter into function setup interface. AWAY MUTE KEY OPEN CCTV AUX. SOUND E705FC/E706FC-W00 POWER Outer device 2 3

8 9. Away Setup (Only available for W00) to turn / keytone. Uer function setup interface, choose the AWAY item by touching, then touch / to turn / away mode. Note: Uer away mode, keeps lighting. When door station rings, the unit will automatically record one picture if nobody answer the call after 5s. AWAY MUTE KEY OPEN CCTV AUX. SOUND 9.2 Mute Setup Uer function setup interface, choose the MUTE item by touching, then touch / to turn / mute mode. Note: Uer mute mode, AWAY MUTE KEY OPEN CCTV AUX. SOUND LED keeps lighting. When door station rings, the unit will not sou the ring. 9.4 Unlock Time Uer function setup interface, choose the OPEN item by touching, then touch / to setup the unlock time between /3/5/0secs. The unit is default to 3s. 9.5 CCTV Surveillance Duration (Optional) Uer function setup interface, choose the CCTV item by touching, then touch / 9.3 Keytone to setup, the monitoring period of CCTV camera between 0m, 2h a manually off, a save Uer function setup interface, choose the KEY SOUND item by touching, then touch / by touch. 4 5 AWAY MUTE KEY OPEN CCTV AUX. SOUND S 5S 0S

9 Note: Please stop monitoring CCTV camera within 24h when you setup the item manually off. 9.6 Extension Switch Time Uer function setup interface, choose the AUX. item by touching, then touch / to setup the extension time between 3/0/20/30s. The unit is default to 3s. AWAY MUTE KEY OPEN CCTV AUX. SOUND 0M 2H AWAY MUTE KEY OPEN CCTV AUX. SOUND 0S 20S 30S 0.System Setup Uer main menu interface, touch / to choose SYSTEM, then touch to enter into function setup interface Door Calling / Pedal Control for Talk (Optional) 2 calling a pedal activity is following the outer switch. Uer system setup interface, choose /PEDAL CTRL, touch choose turn on 2 door calling or pedal control for talk. to confirm, then you are able to Note:. The 2 door calling a pedal control for talk function cannot be opened at the same time. 2.The factory setting is defaulted to turn on 2 door calling function. But you need to connect with a Calling switch to reach this function. When you turn on 2 door calling mode. When the room station is uer staby mode, it will sou the ringtone when 2 door calls. 2. When the room station is uer talk or monitor mode, it will not sou the ringtone but with icon on the screen when 2 door calls. 6 7 ROOM NO. MUSIC 20XX/0/0 0:00 RE PEDAL

10 ROOM NO. MUSIC 20XX/0/0 0:00 RE st Calling from door (the outdoor unit) Calling from 2 door (equipped with the calling device) Note: Please make sure every room has its own room number to avoid confliction. When you turn on pedal control for talk mode. When the system connects with 2pcs door station, uer staby mode, step on the pedal control switch to monitor Door. Step again to monitor Door 2. Step it third time the room station will enter into staby mode. 2.When the system only connects with pc door station, uer staby mode, step on the pedal control switch to monitor door station, step again the room station will enter into staby mode. 3.When door station rings, step on the pedal control switch to talk, step again to stop talk a go back to staby mode. 0.3 Ringtone Setup Uer system setup interface, choose MUSIC, touch ringtone/ringing volume/ringing time. to confirm, then you are able to setup ROOM NO. MUSIC 20XX/0/0 0:00 RE 0.2 Room Number Setup Uer system setup interface, choose ROOM NO., touch room number between /2/3/4. to confirm, then you are able to setup A. Ringtone Ringtone for Door/Door 2: Uer ringtone setup interface, choose MUSIC CH or MUSIC CH2, a touch to confirm, then you are able to choose your favorite ringtones. 8 9

11 B. Ringing Volume ROOM NO. MUSIC 20XX/0/0 0:00 RE Uer ringtone setup interface, choose MUSIC VOLUME, a touch to adjust the ringing volume in 4 levels by touching /. C. Ringing Time ROOM NO. MUSIC 20XX/0/0 0:00 RE Uer ringtone setup interface, choose MUSIC, a touch adjust the ringing time between 5/0/5/20s by touching /. MUSIC MUSIC MUSIC MUSIC CH CH2 VOLUME S to confirm, then you are able MUSIC CH MUSIC CH2 MUSIC VOLUME MUSIC S to confirm, then you are able to 0.4 Time Setup ROOM NO. MUSIC 20XX/0/0 0:00 RE Uer system setup interface, choose, a touch MUSIC MUSIC MUSIC MUSIC CH CH2 VOLUME S 5S 0S 5S 20S to confirm, then you are able to setup time. During setup, touch to choose the item you need to setup, touch / to adjust. 0.5 Reset Uer system setup interface, choose RE, a touch operation with a sou DI. ROOM NO. MUSIC 20XX/ 0/ 0 0:00 RE 20XX/ 0/ 0 0:00:00 to confirm operation. Successful OK CANCEL 20 2 ROOM NO. MUSIC 20XX/0/0 0:00 RE

0.6 Language Setup CH 20XX/XX/XX 2:00 Uer system setup interface, choose LANGUAGE,a touch the language between ENGLISH POLSKI a РУССКИЙ. to confirm, then you can choose Image.

12 0.6 Language Setup CH 20XX/XX/XX 2:00 Uer system setup interface, choose LANGUAGE,a touch the language between ENGLISH POLSKI a РУССКИЙ. to confirm, then you can choose Image.Image Memory Interface (Only available for W00) Uer main menu interface, touch / to choose STORAGE, touch to confirm, the unit will enter into image memory interface. ROOM NO. MUSIC 20XX/0/0 0:00 RE ENGLISH VIEW DEL ALL POLSKI РУССКИЙ. Take Photo Uer monitor/talk mode, touch to take one photo..2 Review Picture Uer image memory interface, choose VIEW, a touch to confirm, the unit will enter into review mode. Touch to delete one picture, touch / to review pictures. CH 20XX / 0 / 0 : 25 Note: Uer monitor/talk mode, touch to choose STORGE, the unit will enter into image memory interface. Note:. Uer monitor/talk mode, touch to enter into review mode. 2. Uer staby mode, touch a hold to enter into review mode

13 Image.3 Delete Picture Uer image memory interface, choose DEL ALL, touch Deleted. 2.Image Adjustment. to confirm, all of the pictures will be Uer monitor/talk mode, touch enter into the select interface, a touch / to choose image, then touch 2. Brightness enter into the image adjustment interface. Uer image adjustment interface, choose BRIGHT to adjust the brightness, you are able to adjust in 00 levels. CH 20XX/XX/XX 2:00 BRIGHT CTRAST CHROMA IMPACT VIEW DEL ALL OK CANCEL BRIGHT CTRAST CHROMA IMPACT 2.2 Contrast Uer image adjustment interface, choose CTRAST to adjust the contrast, you are able to adjust in 00 levels. 2.3 Color Uer image adjustment interface, choose CHROMA to adjust the color, you are able to adjust in 00 levels. 2.4 Picture Effect Uer image adjustment interface, choose IMPACT to adjust the picture effect between /STAND/SOFT/BRIGHT. BRIGHT CTRAST CHROMA IMPACT BRIGHT CTRAST CHROMA IMPACT BRIGHT CTRAST CHROMA IMPACT STAND SOFT BRIGHT 24 25

14 3.Busy Status When one of the room stations is uer talking or monitoring mode, others will enter into busy mode. After finishing talking or monitoring, all of the units will go back to staby mode. Note: When the room station is uer busy mode, it cannot operate room number setup a system reset Function. 4.Automatically Setup Room Number A.Single Room Station Reset the unit, then calls from door station. The room number will be automatically setup after ringing. B.Two Room Stations Reset the units, then calls from door station. The room numbers will be automatically setup after ringing. C.More Than Two Room Stations Reset all the units, then connect the power supply of main unit a the extension unit which you need to setup as No.2, then calls from door station. The room numbers will be automatically setup after Ringing. After that, connect the power supply of the extension unit which you need to setup as No.3, then calls from door station. The room numbers will be automatically setup after ringing. Do the same operation for No.4 extension unit. 5.Alarm Guide 5. Room Number Confliction Alarm When the system has more than two room station with a same room number, the unit will sou DI at intervals. You need to reset the room number to avoid the alarm. If the alarm is still existed after reset the room number, you need to restart the power supply. 5.2 Communication Trouble Alarm If the unit sous DI DI every 3s, it means there is communication trouble between room stations. Please check the wiring a make sure if the main unit is turned on. After resolving the trouble, press or to monitor or talk with door station, the alarm will be automatically canceled. Note: For the extension room station, you will only hear the sou when you operate the monitor or talk function more than 6 times

15 LED/Voice Status Introduction.LED Status LED turns on The unit is powering on. LED turns on The unit is uer mute mode. LED turns on The unit is uer away mode. LED flashes a the screen displays the image Door station is ringing. LED flashes The extension switch is triggered. LED flashes Improper hang up(e705fc, E705FC-W00) 2.Voice Status DI at intervals, it means room number confliction. DI DI at intervals, it means communication trouble. DU, it means the function is not allowed to operate. Long DI, it means the unit is powering on. The unit does not work. Cannot call from door station. Trouble Shooting Guide Problem Possible reason Solution Room station cannot monitor door station. DI DI at intervals when the system connects with more room stations. DI DI continuously when the system connects with more room stations. Cannot call from door station, room station cannot monitor door station a sou DI DI at intervals. Door station can hear the sou from room normally, but the room station can only hear very low sou from door station. -Power is not connected. -The unit is. -The connection between room a door station is cut off. -The unit is. -The room number has not been setup. -The connection between room a door station is short circuit. -The main unit is. -The connection between this unit a the main unit is cut off. Room number confliction. -No main unit in the system. -The main unit is. Talk volume is too lower. -Check if the power is on. -Refer to /, turn on the unit. -Check the connection between room a door station. -Refer to /, turn on the unit. -Refer to 0.2 Room Number Setup, setup a new room number. -Check the connection between room a door station. -Refer to /, turn on the unit. -Check the connection between this unit a the main unit. -Refer to 0.2 Room Number Setup, setup a new room number. -Refer to 0.2 Room Number Setup, reset the unit then setup the room number. -Refer to /, turn on the unit. Refer to 7 Talk Volume Adjustment, adjust the volume. When the system only connects with one room station, it cannot monitor or talk. This unit is not the main unit. Refer to 0.2 Room Number Setup, reset the unit then setup the room number

16 Specifications Item Model No. E705FC E705FC-W00 E706FC E706FC-W00 Screen Power voltage a current Connection 7 color TFT AC ~50Hz/60Hz 5VA or DC3.5-5V/.5A In series Talk mode Haset Has free Power consumption CCTV input 4V,600mA(MAX.) Typical Vp-p(75ohm) temperature -0 to +55 Optional extension room station Optional door station Our room stations (which has intercom function) Our 4 wired door stations

CONTENTS. How to answer the call from the doorbell and release the door lock?...22

CONTENTS. How to answer the call from the doorbell and release the door lock?...22 CONTENTS FEATURES:... 2 SPECIFICATIONS:... 2 DSCRIPTIONS OF MONITOR: (Power voltage:ac 100-240V)... 3 DSCRIPTIONS OF MONITOR: (7/10.2 inch TFT Power voltage:dc 13.8V)... 4 DESCRIPTIONS OF MONITOR - REAR: